Recent commit 1cd23e9e0 (completion: don't use __gitdir() for git
commands, 2017-02-03) rewrapped a couple of long lines, and while
doing so it inadvertently removed a '\' from the end of a line, thus
breaking completion for 'git config remote.name.push <TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three completion functions, namely __git_index_files(), __git_heads()
and __git_tags(), first run __gitdir() and check that the path it
outputs exists, i.e. that there is a git repository, and run a git
command only if there is one.
After the previous changes in this series there are no further uses of
__gitdir()'s output in these functions besides those checks. And
those checks are unnecessary, because we can just execute those git
commands outside of a repository and let them error out. We don't
perform such a check in other places either.
Remove this check and the __gitdir() call from these functions,
sparing the fork()+exec() overhead of the command substitution and the
potential 'git rev-parse' execution.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Outputting error messages during completion is bad: they disrupt the
command line, can't be deleted, and the user is forced to Ctrl-C and
start over most of the time. We already silence stderr of many git
commands in our Bash completion script, but there are still some in
there that can spew error messages when something goes wrong.
We could add the missing stderr redirections to all the remaining
places, but instead let's leverage that git commands are now executed
through the previously introduced __git() wrapper function, and
redirect standard error to /dev/null only in that function. This way
we need only one redirection to take care of errors from almost all
git commands. Redirecting standard error of the __git() wrapper
function thus became redundant, remove them.
The exceptions, i.e. the repo-independent git executions and those in
the __gitdir() function that don't go through __git() already have
their standard error silenced.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several completion functions contain the following pattern to run git
commands respecting the path to the repository specified on the
command line:
git --git-dir="$(__gitdir)" <cmd> <options>
This imposes the overhead of fork()ing a subshell for the command
substitution and potentially fork()+exec()ing 'git rev-parse' inside
__gitdir().
Now, if neither '--gitdir=<path>' nor '-C <path>' options are
specified on the command line, then those git commands are perfectly
capable to discover the repository on their own. If either one or
both of those options are specified on the command line, then, again,
the git commands could discover the repository, if we pass them all of
those options from the command line.
This means we don't have to run __gitdir() at all for git commands and
can spare its fork()+exec() overhead.
Use Bash parameter expansions to check the $__git_dir variable and
$__git_C_args array and to assemble the appropriate '--git-dir=<path>'
and '-C <path>' options if either one or both are present on the
command line. These parameter expansions are, however, rather long,
so instead of changing all git executions and make already long lines
even longer, encapsulate running git with '--git-dir=<path> -C <path>'
options into the new __git() wrapper function. Furthermore, this
wrapper function will also enable us to silence error messages from
git commands uniformly in one place in a later commit.
There's one tricky case, though: in __git_refs() local refs are listed
with 'git for-each-ref', where "local" is not necessarily the
repository we are currently in, but it might mean a remote repository
in the filesystem (e.g. listing refs for 'git fetch /some/other/repo
<TAB>'). Use one-shot variable assignment to override $__git_dir with
the path of the repository where the refs should come from. Although
one-shot variable assignments in front of shell functions are to be
avoided in our scripts in general, in the Bash completion script we
can do that safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main completion function finds the name of the git command by
iterating through all the words on the command line in search for the
first non-option-looking word. As it is not aware of 'git -C's
mandatory path argument, if the '-C <path>' option is present, 'path'
will be the first such word and it will be mistaken for a git command.
This breaks completion in various ways:
- If 'path' happens to match one of the commands supported by the
completion script, then options of that command will be offered.
- If 'path' doesn't match a supported command and doesn't contain any
characters not allowed in Bash identifier names, then the
completion script does basically nothing and Bash in turn falls
back to filename completion for all subsequent words.
- Otherwise, if 'path' does contain such an unallowed character, then
it leads to a more or less ugly error message in the middle of the
command line. The standard '/' directory separator is such a
character, and it happens to trigger one of the uglier errors:
$ git -C some/path <TAB>sh.exe": declare: `_git_some/path': not a valid identifier
error: invalid key: alias.some/path
Fix this by skipping 'git -C's mandatory path argument while iterating
over the words on the command line. Extend the relevant test with
this case and, while at it, with cases that needed similar treatment
in the past ('--git-dir', '-c', '--work-tree' and '--namespace').
Additionally, silence the standard error of the 'declare' builtins
looking for the completion function associated with the git command
and of the 'git config' query for the aliased command. So if git ever
learns a new option with a mandatory argument in the future, then,
though the completion script will again misbehave, at least the
command line will not be utterly disrupted by those error messages.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main git options '--git-dir', '-c', '-C', '--worktree' and
'--namespace' require an argument, but attempting completion right
after them lists git commands.
Don't offer anything right after these options, thus let Bash fall
back to filename completion, because
- the three options '--git-dir', '-C' and '--worktree' do actually
require a path argument, and
- we don't complete the required argument of '-c' and '--namespace',
and in that case the "standard" behavior of our completion script
is to not offer anything, but fall back to filename completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e832f5c096 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In __git_refs() the git commands listing refs, both short and full,
from a given remote repository are run without giving them the path to
the git repository which might have been specified on the command line
via 'git --git-dir=<path>'. This is bad, those git commands should
access the 'refs/remotes/<remote>/' hierarchy or the remote and
credentials configuration in that specified repository.
Use the __gitdir() helper only to find the path to the .git directory
and pass the resulting path to the 'git ls-remote' and 'for-each-ref'
executions that list remote refs. While modifying that 'for-each-ref'
line, remove the superfluous disambiguating doubledash.
Don't use __gitdir() to check that the given remote is on the file
system: basically it performs only a single if statement for us at the
considerable cost of fork()ing a subshell for a command substitution.
We are better off to perform all the necessary checks of the remote in
__git_refs().
Though __git_refs() was the last remaining callsite that passed a
remote to __gitdir(), don't delete __gitdir()'s remote-handling part
yet, just in case some users' custom completion scriptlets depend on
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script already respects the path to the repository
specified on the command line most of the time, here we add the
necessary '--git-dir=$(__gitdir)' options to most of the places where
git was executed without it. The exceptions where said option is not
added are the git invocations:
- in __git_refs() which are non-trivial and will be the subject of
the following patch,
- getting the list of git commands, merge strategies and archive
formats, because these are independent from the repository and
thus don't need it, and
- the 'git rev-parse --git-dir' in __gitdir() itself.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That "first argument is passed to __gitdir()" statement in particular
is not really helpful, and after this series it won't be the case
anyway.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) learned that
"git diff --submodule=" can take "diff" as a recently added option.
* pl/complete-diff-submodule-diff:
Completion: Add support for --submodule=diff
Rewrite a scripted porcelain "git difftool" in C.
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
Teach git-completion.bash about the 'diff' option to 'git diff
--submodule=', which was added in Git 2.11.
Signed-off-by: Peter Law <PeterJCLaw@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that returns a buffer containing the absolute path of its
argument and a semantic patch for its intended use. It avoids an extra
string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-convert-objects, originally named git-convert-cache was used in
early 2005 to convert ancient repositories where objects are named
after the hash of their compressed contents to the current object
naming sheme where they are named after the hash of their pre-compression
contents.
By now the need for conversion of the very early repositories is
less relevant, we no longer need to keep it in contrib; remove it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It served its purpose, but now we have a builtin difftool. Time for the
Perl script to enjoy Florida.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Retire long unused/unmaintained gitview from the contrib/ area.
* sb/remove-gitview:
doc: git-gui browser does not default to HEAD
doc: gitk: add the upstream repo location
doc: gitk: remove gitview reference
contrib: remove gitview
gitview did not have meaningful contributions since 2007, which gives the
impression it is either a mature or dead project.
In both cases we should not carry it in git.git as the README for contrib
states we only want to carry experimental things to give early exposure.
Recently a security vulnerability was reported by Javantea, so the decision
to either fix the issue or remove the code in question becomes a bit
more urgent.
Reported-by: Javantea <jvoss@altsci.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge --continue" has been added as a synonym to "git commit"
to conclude a merge that has stopped due to conflicts.
* cp/merge-continue:
merge: mark usage error strings for translation
merge: ensure '--abort' option takes no arguments
completion: add --continue option for merge
merge: add '--continue' option as a synonym for 'git commit'
The character width table has been updated to match Unicode 9.0
* bb/unicode-9.0:
unicode_width.h: update the width tables to Unicode 9.0
update_unicode.sh: remove the plane filter
update_unicode.sh: automatically download newer definition files
update_unicode.sh: pin the uniset repo to a known good commit
update_unicode.sh: remove an unnecessary subshell level
update_unicode.sh: move it into contrib/update-unicode
"git rebase" learned "--quit" option, which allows a user to
remove the metadata left by an earlier "git rebase" that was
manually aborted without using "git rebase --abort".
* nd/rebase-forget:
rebase: add --quit to cleanup rebase, leave everything else untouched
Add 'git merge --continue' option when completing.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The uniset upstream has accepted my patches that eliminate the Unicode
plane offsets from the output in '--32' mode.
Remove the corresponding filter in update_unicode.sh.
This also fixes the issue that the plane offsets were not removed from
the second uniset call.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking just for the unicode data files' existence is not sufficient;
we should also download them if a newer version exists on the Unicode
consortium's servers. Option -N of wget does this nicely for us.
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The uniset upstream has added more commits that for example change the
hexadecimal output in '--32' mode to decimal. Let's pin the repo to a
commit that still outputs the width tables in the format we want.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the move into contrib/update-unicode, we no longer create the
unicode directory to have a clean working folder. Instead, the directory
of the script is used. This means that the subshell can be removed.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As it's used only by a tiny minority of the Git developer population,
this script does not belong into the main Git source directory.
Move it into contrib/ and adjust the paths to account for the new
location.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are occasions when you decide to abort an in-progress rebase and
move on to do something else but you forget to do "git rebase --abort"
first. Or the rebase has been in progress for so long you forgot about
it. By the time you realize that (e.g. by starting another rebase)
it's already too late to retrace your steps. The solution is normally
rm -r .git/<some rebase dir>
and continue with your life. But there could be two different
directories for <some rebase dir> (and it obviously requires some
knowledge of how rebase works), and the ".git" part could be much
longer if you are not at top-dir, or in a linked worktree. And
"rm -r" is very dangerous to do in .git, a mistake in there could
destroy object database or other important data.
Provide "git rebase --quit" for this use case, mimicking a precedent
that is "git cherry-pick --quit".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pathname value in a clean/smudge filter process "key=value" pair can
contain the '=' character (introduced in edcc858). Make the user aware
of this issue in the docs, add a corresponding test case, and fix the
issue in filter process value parser of the example implementation in
contrib.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the rule to convert "unsigned char [20]" into "struct
object_id *" in contrib/coccinelle/
* rs/cocci:
cocci: avoid self-references in object_id transformations
The command-line completion script (in contrib/) learned to
complete "git cmd ^mas<HT>" to complete the negative end of
reference to "git cmd ^master".
* cp/completion-negative-refs:
completion: support excluding refs
Improve the rule to convert "unsigned char [20]" into "struct
object_id *" in contrib/coccinelle/
* rs/cocci:
cocci: avoid self-references in object_id transformations
The object_id functions oid_to_hex, oid_to_hex_r, oidclr, oidcmp, and
oidcpy are defined as wrappers of their legacy counterparts sha1_to_hex,
sha1_to_hex_r, hashclr, hashcmp, and hashcpy, respectively. Make sure
that the Coccinelle transformations for converting legacy function calls
are not applied to these wrappers themselves, which would result in
tautological declarations.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smudge/clean filter API expect an external process is spawned
to filter the contents for each path that has a filter defined. A
new type of "process" filter API has been added to allow the first
request to run the filter for a path to spawn a single process, and
all filtering need is served by this single process for multiple
paths, reducing the process creation overhead.
* ls/filter-process:
contrib/long-running-filter: add long running filter example
convert: add filter.<driver>.process option
convert: prepare filter.<driver>.process option
convert: make apply_filter() adhere to standard Git error handling
pkt-line: add functions to read/write flush terminated packet streams
pkt-line: add packet_write_gently()
pkt-line: add packet_flush_gently()
pkt-line: add packet_write_fmt_gently()
pkt-line: extract set_packet_header()
pkt-line: rename packet_write() to packet_write_fmt()
run-command: add clean_on_exit_handler
run-command: move check_pipe() from write_or_die to run_command
convert: modernize tests
convert: quote filter names in error messages
Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
A new credential helper that talks via "libsecret" with
implementations of XDG Secret Service API has been added to
contrib/credential/.
* mm/credential-libsecret:
contrib: add credential helper for libsecret
Add a simple pass-thru filter as example implementation for the Git
filter protocol version 2. See Documentation/gitattributes.txt, section
"Filter Protocol" for more info.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d64ea0f83b ("git-compat-util: add xstrdup_or_null helper",
2015-01-12) added a handy wrapper that allows us to get a duplicate
of a string or NULL if the original is NULL, but a handful of
codepath predate its introduction or just weren't aware of it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
