As FreeBSD is not the only platform whose regexp library reports
a REG_ILLSEQ error when fed invalid UTF-8, add logic to detect that
automatically and skip the affected tests.
* cb/t4210-illseq-auto-detect:
t4210: detect REG_ILLSEQ dynamically and skip affected tests
t/helper: teach test-regex to report pattern errors (like REG_ILLSEQ)
"git log -L..." now takes advantage of the "which paths are touched
by this commit?" info stored in the commit-graph system.
* ds/line-log-on-bloom:
line-log: integrate with changed-path Bloom filters
line-log: try to use generation number-based topo-ordering
line-log: more responsive, incremental 'git log -L'
t4211-line-log: add tests for parent oids
line-log: remove unused fields from 'struct line_log_data'
While the MyFirstContribution guide exists and has received some use and
positive reviews, it is still not as discoverable as it could be. Add a
reference to it from the GitHub pull request template, where many
brand-new contributors may look. Also add a reference to it in
SubmittingPatches, which is the central source of guidance for patch
contribution.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For each worktree removed by "git worktree prune", it reports the reason
for the removal. All reasons share the common prefix "Removing
worktrees/%s:". As new removal reasons are added, this prefix needs to
be duplicated, which is error-prone and potentially cumbersome.
Therefore, factor out the common prefix.
Although this change seems to increase the "sentence lego quotient", it
should be reasonably safe, as the reason for removal is a distinct
clause, not strictly related to the prefix. Moreover, the "worktrees" in
"Removing worktrees/%s:" is a path literal which ought not be localized,
so by factoring it out, we can more easily avoid exposing that path
fragment to translators.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify the 'chunk_ids' and 'chunk_sizes' arrays into an array of
'struct chunk_info'. This will allow more cleanups in the following
patches.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In write_commit_graph_file() one block of code fills the array of
chunk IDs, another block of code fills the array of chunk offsets,
then the chunk IDs and offsets are written to the Chunk Lookup table,
and finally a third block of code writes the actual chunks. In case
of optional chunks like Extra Edge List and Base Graphs List there is
also a condition checking whether that chunk is necessary/desired, and
that same condition is repeated in all those three blocks of code.
This patch series is about to add more optional chunks, so there would
be even more repeated conditions.
Those chunk offsets are relative to the beginning of the file, so they
inherently depend on the size of the Chunk Lookup table, which in turn
depends on the number of chunks that are to be written to the
commit-graph file. IOW at the time we set the first chunk's ID we
can't yet know its offset, because we don't yet know how many chunks
there are.
Simplify this by initially filling an array of chunk sizes, not
offsets, and calculate the offsets based on the chunk sizes only
later, while we are writing the Chunk Lookup table. This way we can
fill the arrays of chunk IDs and sizes in one go, eliminating one set
of repeated conditions.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Chunk Lookup table stores the chunks' starting offset in the
commit-graph file, not their sizes. Consequently, the size of a chunk
can only be calculated by subtracting its offset from the offset of
the subsequent chunk (or that of the terminating label). This is
currenly implemented in a bit complicated way: as we iterate over the
entries of the Chunk Lookup table, we check the id of each chunk and
store its starting offset, then we check the id of the last seen chunk
and calculate its size using its previously saved offset. At the
moment there is only one chunk for which we calculate its size, but
this patch series will add more, and the repeated chunk id checks are
not that pretty.
Instead let's read ahead the offset of the next chunk on each
iteration, so we can calculate the size of each chunk right away,
right where we store its starting offset.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we iterate over all entries of the Chunk Lookup table we make
sure that we don't attempt to read past the end of the mmap-ed
commit-graph file, and check in each iteration that the chunk ID and
offset we are about to read is still within the mmap-ed memory region.
However, these checks in each iteration are not really necessary,
because the number of chunks in the commit-graph file is already known
before this loop from the just parsed commit-graph header.
So let's check that the commit-graph file is large enough for all
entries in the Chunk Lookup table before we start iterating over those
entries, and drop those per-iteration checks. While at it, take into
account the size of everything that is necessary to have a valid
commit-graph file, i.e. the size of the header, the size of the
mandatory OID Fanout chunk, and the size of the signature in the
trailer as well.
Note that this necessitates the change of the error message as well,
and, consequently, have to update the 'detect incorrect chunk count'
test in 't5318-commit-graph.sh' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our CodingGuidelines says that it's sufficient to include one of
'git-compat-util.h' and 'cache.h', but both 'commit-graph.c' and
'commit-graph.h' include both. Let's include only 'git-compat-util.h'
to loose a bunch of unnecessary dependencies; but include 'hash.h',
because 'commit-graph.h' does require the definition of 'struct
object_id'.
'commit-graph.h' explicitly includes 'repository.h' and
'string-list.h', but only needs the declaration of a few structs from
them. Drop these includes and forward-declare the necessary structs
instead.
'commit-graph.c' includes 'dir.h', but doesn't actually use anything
from there, so let's drop that #include as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ll_diff_tree_oid() has only ever returned 0 [1], so it's return value
is basically useless. It's only caller diff_tree_oid() has only ever
returned the return value of ll_diff_tree_oid() as-is [2], so its
return value is just as useless. Most of diff_tree_oid()'s callers
simply ignore its return value, except:
- diff_root_tree_oid() is a thin wrapper around diff_tree_oid() and
returns with its return value, but all of diff_root_tree_oid()'s
callers ignore its return value.
- rev_compare_tree() and rev_same_tree_as_empty() do look at the
return value in a condition, but, since the return value is always
0, the former's < 0 condition is never fulfilled, while the
latter's >= 0 condition is always fulfilled.
So let's drop the return value of ll_diff_tree_oid(), diff_tree_oid()
and diff_root_tree_oid(), and drop those conditions from
rev_compare_tree() and rev_same_tree_as_empty() as well.
[1] ll_diff_tree_oid() and its ancestors have been returning only 0
ever since it was introduced as diff_tree() in 9174026cfe (Add
"diff-tree" program to show which files have changed between two
trees., 2005-04-09).
[2] diff_tree_oid() traces back to diff-tree.c:main() in 9174026cfe as
well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
clear_##slabname() frees only the memory allocated for a commit slab
itself, but entries in the commit slab might own additional memory
outside the slab that should be freed as well. We already have (at
least) one such commit slab, and this patch series is about to add one
more.
To free all additional memory owned by entries on the commit slab the
user of such a slab could iterate over all commits it knows about,
peek whether there is a valid entry associated with each commit, and
free the additional memory, if any. Or it could rely on intimate
knowledge about the internals of the commit slab implementation, and
could itself iterate directly through all entries in the slab, and
free the additional memory. Or it could just leak the additional
memory...
Introduce deep_clear_##slabname() to allow releasing memory owned by
commit slab entries by invoking the 'void free_fn(elemtype *ptr)'
function specified as parameter for each entry in the slab.
Use it in get_shallow_commits() in 'shallow.c' to replace an
open-coded iteration over a commit slab's entries.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph format specifies that "All 4-byte numbers are in
network order", but the commit-graph contains 8-byte integers as well
(file offsets in the Chunk Lookup table), and their byte order is
unspecified.
Clarify that all multi-byte integers are in network byte order.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file format specifies that the chunks may be in any
order. However, if the OID Lookup chunk happens to be the last one in
the file, then any command attempting to access the commit-graph data
will fail with:
fatal: invalid commit position. commit-graph is likely corrupt
In this case the error is wrong, the commit-graph file does conform to
the specification, but the parsing of the Chunk Lookup table is a bit
buggy, and leaves the field holding the number of commits in the
commit-graph zero-initialized.
The number of commits in the commit-graph is determined while parsing
the Chunk Lookup table, by dividing the size of the OID Lookup chunk
with the hash size. However, the Chunk Lookup table doesn't actually
store the size of the chunks, but it stores their starting offset.
Consequently, the size of a chunk can only be calculated by
subtracting the starting offsets of that chunk from the offset of the
subsequent chunk, or in case of the last chunk from the offset
recorded in the terminating label. This is currenly implemented in a
bit complicated way: as we iterate over the entries of the Chunk
Lookup table, we check the ID of each chunk and store its starting
offset, then we check the ID of the last seen chunk and calculate its
size using its previously saved offset if necessary (at the moment
it's only necessary for the OID Lookup chunk). Alas, while parsing
the Chunk Lookup table we only interate through the "real" chunks, but
never look at the terminating label, thus don't even check whether
it's necessary to calulate the size of the last chunk. Consequently,
if the OID Lookup chunk is the last one, then we don't calculate its
size and turn don't run the piece of code determining the number of
commits in the commit graph, leaving the field holding that number
unchanged (i.e. zero-initialized), eventually triggering the sanity
check in load_oid_from_graph().
Fix this by iterating through all entries in the Chunk Lookup table,
including the terminating label.
Note that this is the minimal fix, suitable for the maintenance track.
A better fix would be to simplify how the chunk sizes are calculated,
but that is a more invasive change, less suitable for 'maint', so that
will be done in later patches.
This additional flexibility of scanning more chunks breaks a test for
"git commit-graph verify" so alter that test to mutate the commit-graph
to have an even lower chunk count.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Submodules should be handled the same as regular directories with
respect to the presence of a trailing slash, i.e. commands like:
git diff rev1 rev2 -- $path
git rev-list HEAD -- $path
should produce the same output whether $path is 'submod' or 'submod/'.
This has been fixed in commit 74b4f7f277 (tree-walk.c: ignore trailing
slash on submodule in tree_entry_interesting(), 2014-01-23).
Unfortunately, that commit had the unintended side effect to handle
'submod/anything' the same as 'submod' and 'submod/' as well, e.g.:
$ git log --oneline --name-only -- sha1collisiondetection/whatever
4125f78222 sha1dc: update from upstream
sha1collisiondetection
07a20f569b Makefile: fix unaligned loads in sha1dc with UBSan
sha1collisiondetection
23e37f8e9d sha1dc: update from upstream
sha1collisiondetection
86cfd61e6b sha1dc: optionally use sha1collisiondetection as a submodule
sha1collisiondetection
Fix this by rejecting submodules as partial pathnames when their
trailing slash is followed by anything.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0b4396f068 (git-p4: make python2.7 the oldest supported version,
2019-12-13), git-p4 was updated to only support 2.7 and newer. Since
Python 2.6 is pretty much ancient history, update CodingGuidelines to
show that 2.7 is the oldest version supported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 48a8c26c62 (Documentation: avoid poor-man's small caps GIT,
2013-01-21), the documentation was amended to spell Git's name as Git
when talking about the system as a whole. However, t/README was skipped
over when the treatment was applied.
Bring t/README into conformance with the CodingGuidelines by casing
"Git" properly.
While we're at it, fix a small typo. Change "the git internal" to "the
Git internals".
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the provided free_commit_graph() to properly free the commit graph
in fuzz-commit-graph. Otherwise, the fuzzer itself leaks memory when the
struct contains pointers to allocated memory.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In proc _is_git check that supplied path is a valid work tree path.
This allows the choose_repository::pick dialog to accept path to a
work tree directory.
Signed-off-by: Mikhail Terekhov <termim@gmail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
In trace output (when GIT_TRACE_CURL is true), redact the values of all
HTTP cookies by default. Now that auth headers (since the implementation
of GIT_TRACE_CURL in 74c682d3c6 ("http.c: implement the GIT_TRACE_CURL
environment variable", 2016-05-24)) and cookie values (since this
commit) are redacted by default in these traces, also allow the user to
inhibit these redactions through an environment variable.
Since values of all cookies are now redacted by default,
GIT_REDACT_COOKIES (which previously allowed users to select individual
cookies to redact) now has no effect.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
do_match_pathspec() started life as match_pathspec_depth_1() and for
correctness was only supposed to be called from match_pathspec_depth().
match_pathspec_depth() was later renamed to match_pathspec(), so the
invariant we expect today is that do_match_pathspec() has no direct
callers outside of match_pathspec().
Unfortunately, this intention was lost with the renames of the two
functions, and additional calls to do_match_pathspec() were added in
commits 75a6315f74 ("ls-files: add pathspec matching for submodules",
2016-10-07) and 89a1f4aaf7 ("dir: if our pathspec might match files
under a dir, recurse into it", 2019-09-17). Of course,
do_match_pathspec() had an important advantge over match_pathspec() --
match_pathspec() would hardcode flags to one of two values, and these
new callers needed to pass some other value for flags. Also, although
calling do_match_pathspec() directly was incorrect, there likely wasn't
any difference in the observable end output, because the bug just meant
that fill_diretory() would recurse into unneeded directories. Since
subsequent does-this-path-match checks on individual paths under the
directory would cause those extra paths to be filtered out, the only
difference from using the wrong function was unnecessary computation.
The second of those bad calls to do_match_pathspec() was involved -- via
either direct movement or via copying+editing -- into a number of later
refactors. See commits 777b420347 ("dir: synchronize
treat_leading_path() and read_directory_recursive()", 2019-12-19),
8d92fb2927 ("dir: replace exponential algorithm with a linear one",
2020-04-01), and 95c11ecc73 ("Fix error-prone fill_directory() API; make
it only return matches", 2020-04-01). The last of those introduced the
usage of do_match_pathspec() on an individual file, and thus resulted in
individual paths being returned that shouldn't be.
The problem with calling do_match_pathspec() instead of match_pathspec()
is that any negated patterns such as ':!unwanted_path` will be ignored.
Add a new match_pathspec_with_flags() function to fulfill the needs of
specifying special flags while still correctly checking negated
patterns, add a big comment above do_match_pathspec() to prevent others
from misusing it, and correct current callers of do_match_pathspec() to
instead use either match_pathspec() or match_pathspec_with_flags().
One final note is that DO_MATCH_LEADING_PATHSPEC needs special
consideration when working with DO_MATCH_EXCLUDE. The point of
DO_MATCH_LEADING_PATHSPEC is that if we have a pathspec like
*/Makefile
and we are checking a directory path like
src/module/component
that we want to consider it a match so that we recurse into the
directory because it _might_ have a file named Makefile somewhere below.
However, when we are using an exclusion pattern, i.e. we have a pathspec
like
:(exclude)*/Makefile
we do NOT want to say that a directory path like
src/module/component
is a (negative) match. While there *might* be a file named 'Makefile'
somewhere below that directory, there could also be other files and we
cannot pre-emptively rule all the files under that directory out; we
need to recurse and then check individual files. Adjust the
DO_MATCH_LEADING_PATHSPEC logic to only get activated for positive
pathspecs.
Reported-by: John Millikin <jmillikin@stripe.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, extensions were recognized regardless of repository format
version. If the user sets an undefined "extensions" value on a
repository of version 0 and that value is used by a future git version,
they might get an undesired result.
Because all extensions now also upgrade repository versions, tightening
the check would help avoid this for future extensions.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'extensions' configuration variable gets special meaning in the new
repository version, so when enabling the extension we should upgrade the
repository to version 1.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Retroactively adding a filter can be useful for existing shallow clones as
they allow users to see earlier change histories without downloading all
git objects in a regular --unshallow fetch.
Without this patch, users can make a clone partial by editing the
repository configuration to convert the remote into a promisor, like:
git config core.repositoryFormatVersion 1
git config extensions.partialClone origin
git fetch --unshallow --filter=blob:none origin
Since the hard part of making this work is already in place and such
edits can be error-prone, teach Git to perform the required configuration
change automatically instead.
Note that this change does not modify the existing git behavior which
recognizes setting extensions.partialClone without changing
repositoryFormatVersion.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In version 1 of repository format, "extensions" gained special meaning
and it is safer to avoid upgrading when there are pre-existing
extensions.
Make list-objects-filter to use the helper function instead of setting
repository version directly as a prerequisite of exposing the upgrade
capability.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sparse-checkout's purpose is to update the working tree to have it
reflect a subset of the tracked files. As such, it shouldn't be
switching branches, making commits, downloading or uploading data, or
staging or unstaging changes. Other than updating the worktree, the
only thing sparse-checkout should touch is the SKIP_WORKTREE bit of the
index. In particular, this sets up a nice invariant: running
sparse-checkout will never change the status of any file in `git status`
(reflecting the fact that we only set the SKIP_WORKTREE bit if the file
is safe to delete, i.e. if the file is unmodified).
Traditionally, we did a _really_ bad job with this goal. The
predecessor to sparse-checkout involved manual editing of
.git/info/sparse-checkout and running `git read-tree -mu HEAD`. That
command would stage and unstage changes and overwrite dirty changes in
the working tree.
The initial implementation of the sparse-checkout command was no better;
it simply invoked `git read-tree -mu HEAD` as a subprocess and had the
same caveats, though this issue came up repeatedly in review comments
and workarounds for the problems were put in place before the feature
was merged[1, 2, 3, 4, 5, 6; especially see 4 & 6].
[1] https://lore.kernel.org/git/CABPp-BFT9A5n=_bx5LsjCvbogqwSjiwgr5amcjgbU1iAk4KLJg@mail.gmail.com/
[2] https://lore.kernel.org/git/CABPp-BEmwSwg4tgJg6nVG8a3Hpn_g-=ZjApZF4EiJO+qVgu4uw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFV7TA0qwZCQpHCqx9N+JifyRyuBQ-pZ_oGfe-NOgyh7A@mail.gmail.com/
[4] https://lore.kernel.org/git/CABPp-BHYCCD+Vx5fq35jH82eHc1-P53Lz_aGNpHJNcx9kg2K-A@mail.gmail.com/
[5] https://lore.kernel.org/git/CABPp-BF+JWYZfDqp2Tn4AEKVp4b0YMA=Mbz4Nz62D-gGgiduYQ@mail.gmail.com/
[6] https://lore.kernel.org/git/20191121163706.GV23183@szeder.dev/
However, these workarounds, in addition to disabling the feature in a
number of important cases, also missed one special case. I'll get back
to it later.
In the 2.27.0 cycle, the disabling of the feature was lifted by finally
replacing the internal equivalent of `git read-tree -mu HEAD` with
something that did what we wanted: the new update_sparsity() function in
unpack-trees.c that only ever updates SKIP_WORKTREE bits in the index
and updates the working tree to match. This new function handles all
the cases that were problematic for the old implementation, except that
it breaks the same special case that avoided the workarounds of the old
implementation, but broke it in a different way.
So...that brings us to the special case: a git clone performed with
--no-checkout. As per the meaning of the flag, --no-checkout does not
check out any branch, with the implication that you aren't on one and
need to switch to one after the clone. Implementationally, HEAD is
still set (so in some sense you are partially on a branch), but
* the index is "unborn" (non-existent)
* there are no files in the working tree (other than .git/)
* the next time git switch (or git checkout) is run it will run
unpack_trees with `initial_checkout` flag set to true.
It is not until you run, e.g. `git switch <somebranch>` that the index
will be written and files in the working tree populated.
With this special --no-checkout case, the traditional `read-tree -mu
HEAD` behavior would have done the equivalent of acting like checkout --
switch to the default branch (HEAD), write out an index that matches
HEAD, and update the working tree to match. This special case slipped
through the avoid-making-changes checks in the original sparse-checkout
command and thus continued there.
After update_sparsity() was introduced and used (see commit f56f31af03
("sparse-checkout: use new update_sparsity() function", 2020-03-27)),
the behavior for the --no-checkout case changed: Due to git's
auto-vivification of an empty in-memory index (see do_read_index() and
note that `must_exist` is false), and due to sparse-checkout's
update_working_directory() code to always write out the index after it
was done, we got a new bug. That made it so that sparse-checkout would
switch the repository from a clone with an "unborn" index (i.e. still
needing an initial_checkout), to one that had a recorded index with no
entries. Thus, instead of all the files appearing deleted in `git
status` being known to git as a special artifact of not yet being on a
branch, our recording of an empty index made it suddenly look to git as
though it was definitely on a branch with ALL files staged for deletion!
A subsequent checkout or switch then had to contend with the fact that
it wasn't on an initial_checkout but had a bunch of staged deletions.
Make sure that sparse-checkout changes nothing in the index other than
the SKIP_WORKTREE bit; in particular, when the index is unborn we do not
have any branch checked out so there is no sparsification or
de-sparsification work to do. Simply return from
update_working_directory() early.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 897d68e7af (Makefile: use curl-config --cflags, 2020-03-26), we
taught the build process to use `curl-config --cflags` to make sure that
it can find cURL's headers.
In the MSVC build, this is completely bogus because we're running in a
Git for Windows SDK whose `curl-config` supports the _GCC_ build.
Let's just ignore each and every `-I<path>` option where `<path>` points
to GCC/Clang specific headers.
Reported by Jeff Hostetler in
https://github.com/microsoft/git/issues/275.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if we strongly discourage putting credentials into the URLs passed
via the command-line, there _is_ support for that, and users _do_ do
that.
Let's scrub them before writing them to the reflog.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'pack_objects_hook' static
variable into this struct.
It is used by code common to protocol v0 and protocol v2.
While at it let's also free() it in upload_pack_data_clear().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'allow_sideband_all' static
variable into this struct.
It is used only by protocol v2 code.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'allow_ref_in_want' static
variable into this struct.
It is used only by protocol v2 code.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'allow_filter' static variable
into this struct.
It is used by both protocol v0 and protocol v2 code.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'keepalive' static variable
into this struct.
It is used by code common to protocol v0 and protocol v2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to upload_pack_config(),
so that this function can use all the fields of the struct.
This will be used in followup commits to move static variables
that are set in upload_pack_config() into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's take this opportunity to change the
'multi_ack' variable, which is now part of 'upload_pack_data',
to an enum.
This will make it clear which values this variable can take.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the multi_ack static variable into
this struct.
It is only used by protocol v0 code since protocol v2 assumes
certain baseline capabilities, but rolling it into
upload_pack_data and just letting v2 code ignore it as it does
now is more coherent and cleaner.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the filter_capability_requested
static variable into this struct.
It is only used by protocol v0 code since protocol v2 assumes
certain baseline capabilities, but rolling it into
upload_pack_data and just letting v2 code ignore it as it does
now is more coherent and cleaner.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'use_sideband' static variable
into this struct.
This variable is used by both v0 and v2 protocols.
While at it, let's update the comment near the variable
definition.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'no_done', 'daemon_mode' and
'timeout' variables into this struct.
They are only used by protocol v0 code since protocol v2 assumes
certain baseline capabilities, but rolling them into
upload_pack_data and just letting v2 code ignore them as it does
now is more coherent and cleaner.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's annotate fields from this struct to let
people know which ones are used only for protocol v0 and which
ones only for protocol v2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's actually start using some bitfields of
that struct. These bitfields were introduced in 3145ea957d
("upload-pack: introduce fetch server command", 2018-03-15), but
were never used.
We could instead have just removed the following bitfields
from the struct:
unsigned use_thin_pack : 1;
unsigned use_ofs_delta : 1;
unsigned no_progress : 1;
unsigned use_include_tag : 1;
but using them makes it possible to remove a number of static
variables with the same name and purpose from 'upload-pack.c'.
This is a behavior change, as we accidentally used to let values
in those bitfields propagate from one v2 "fetch" command to
another for ssh/git/file connections (but not for http). That's
fixing a bug, but one nobody is likely to see, because it would
imply the client sending different capabilities for each request.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following lines were not covered in a recent line-coverage test
against Git:
builtin/commit-graph.c
5b6653e5 244) progress = start_delayed_progress(
5b6653e5 268) stop_progress(&progress);
These statements are executed when both '--stdin-commits' and
'--progress' are passed. Introduce a trio of tests that exercise various
combinations of these options to ensure that these lines are covered.
More importantly, this is exercising a (somewhat) previously-ignored
feature of '--stdin-commits', which is that it respects '--progress'.
Prior to 5b6653e523 (builtin/commit-graph.c: dereference tags in
builtin, 2020-05-13), dereferencing input from '--stdin-commits' was
done inside of commit-graph.c.
Now that an additional progress meter may be generated from outside of
commit-graph.c, add a corresponding test to make sure that it also
respects '--[no]-progress'.
The other location that generates progress meter output (from d335ce8f24
(commit-graph.c: show progress of finding reachable commits,
2020-05-13)) is already covered by any test that passes '--reachable'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of tests in t5318 use 'test_line_count = 0 ...' to make sure
that some command does not write any output. While correct, it is more
idiomatic to use 'test_must_be_empty' instead. Switch the former
invocations to use the latter instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some repositories in the wild have commits that record nonsense
committer timezone (e.g. rails.git); "git fast-import" learned an
option to pass these nonsense timestamps intact to allow recreating
existing repositories as-is.
* en/fast-import-looser-date:
fast-import: add new --date-format=raw-permissive format
The error message from "git checkout -b foo -t bar baz" was
confusing.
* rs/checkout-b-track-error:
checkout: improve error messages for -b with extra argument
checkout: add tests for -b and --track
We've adopted a convention that any on-stack structure can be
initialized to have zero values in all fields with "= { 0 }", even
when the first field happens to be a pointer, but sparse complained
that a null pointer should be spelled NULL for a long time. Start
using -Wno-universal-initializer option to squelch it.
* lo/sparse-universal-zero-init:
sparse: allow '{ 0 }' to be used without warnings
