Protect refs in a hierarchy that can come from more than one remote
hierarcies from incorrect removal by "git fetch --prune".
* cn/fetch-prune-overlapping-destination:
fetch: handle overlaping refspecs on --prune
fetch: add a failing test for prunning with overlapping refspecs
We need to consider that a remote-tracking branch may match more than
one rhs of a fetch refspec. In such a case, it is not enough to stop at
the first match but look at all of the matches in order to determine
whether a head is stale.
To this goal, introduce a variant of query_refspecs which returns all of
the matching refspecs and loop over those answers to check for
staleness.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" did not pay attention to branch.*.pushremote if it is
defined earlier than remote.pushdefault; the order of these two
variables in the configuration file should not matter, but it did by
mistake.
* jk/remote-pushremote-config-reading:
remote: handle pushremote config in any order
Catch "git push $there no-such-branch" early.
* jk/detect-push-typo-early:
push: detect local refspec errors early
match_explicit_lhs: allow a "verify only" mode
match_explicit: hoist refspec lhs checks into their own function
"git push" did not pay attention to branch.*.pushremote if it is
defined earlier than remote.pushdefault; the order of these two
variables in the configuration file should not matter, but it did by
mistake.
* jk/remote-pushremote-config-reading:
remote: handle pushremote config in any order
When pushing, we do not even look at our push refspecs until
after we have made contact with the remote receive-pack and
gotten its list of refs. This means that we may go to some
work, including asking the user to log in, before realizing
we have simple errors like "git push origin matser".
We cannot catch all refspec problems, since fully evaluating
the refspecs requires knowing what the remote side has. But
we can do a quick sanity check of the local side and catch a
few simple error cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The match_explicit_lhs function has all of the logic
necessary to verify the refspecs without actually doing any
work. This patch lets callers pass a NULL "match" pointer to
indicate they want a "verify only" operation.
For the most part, we just need to avoid writing to the NULL
pointer. However, we also have to refactor the
try_explicit_object_name sub-function; it indicates success by
allocating and returning a new ref. Instead, we give it an
"out" parameter for the match and return a numeric status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for being able to check the left-hand side of
our push refspecs separately, this pulls the examination of
them out into its own function. There should be no behavior
change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote we push can be defined either by
remote.pushdefault or by branch.*.pushremote for the current
branch. The order in which they appear in the config file
should not matter to precedence (which should be to prefer
the branch-specific config).
The current code parses the config linearly and uses a
single string to store both values, overwriting any
previous value. Thus, config like:
[branch "master"]
pushremote = foo
[remote]
pushdefault = bar
erroneously ends up pushing to "bar" from the master branch.
We can fix this by storing both values and resolving the
correct value after all config is read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to use two separate rules for the normal ref resolution
dwimming and dwimming done to decide which remote ref to grab. The
third parameter to refname_match() selected which rules to use.
When these two rules were harmonized in
2011-11-04 dd621df9cd refs DWIMmery: use the same rule for both "git fetch" and others
, ref_fetch_rules was #defined to avoid potential breakages for
in-flight topics.
It is now safe to remove the backwards-compatibility code, so remove
refname_match()'s third parameter, make ref_rev_parse_rules private to
refs.c, and remove ref_fetch_rules entirely.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git push origin master" update the same ref that would be
updated by our 'master' when "git push origin" (no refspecs) is run
while the 'master' branch is checked out, which makes "git push"
more symmetric to "git fetch" and more usable for the triangular
workflow.
* jc/push-refmap:
push: also use "upstream" mapping when pushing a single ref
push: use remote.$name.push as a refmap
builtin/push.c: use strbuf instead of manual allocation
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
The "--tags" option to "git fetch" used to be literally a synonym to
a "refs/tags/*:refs/tags/*" refspec, which meant that (1) as an
explicit refspec given from the command line, it silenced the lazy
"git fetch" default that is configured, and (2) also as an explicit
refspec given from the command line, it interacted with "--prune"
to remove any tag that the remote we are fetching from does not
have.
This demotes it to an option; with it, we fetch all tags in
addition to what would be fetched without the option, and it does
not interact with the decision "--prune" makes to see what
remote-tracking refs the local has are missing the remote
counterpart.
* mh/fetch-tags-in-addition-to-normal-refs: (23 commits)
fetch: improve the error messages emitted for conflicting refspecs
handle_duplicate(): mark error message for translation
ref_remote_duplicates(): extract a function handle_duplicate()
ref_remove_duplicates(): simplify loop logic
t5536: new test of refspec conflicts when fetching
ref_remove_duplicates(): avoid redundant bisection
git-fetch.txt: improve description of tag auto-following
fetch-options.txt: simplify ifdef/ifndef/endif usage
fetch, remote: properly convey --no-prune options to subprocesses
builtin/remote.c:update(): use struct argv_array
builtin/remote.c: reorder function definitions
query_refspecs(): move some constants out of the loop
fetch --prune: prune only based on explicit refspecs
fetch --tags: fetch tags *in addition to* other stuff
fetch: only opportunistically update references based on command line
get_expanded_map(): avoid memory leak
get_expanded_map(): add docstring
builtin/fetch.c: reorder function definitions
get_ref_map(): rename local variables
api-remote.txt: correct section "struct refspec"
...
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since f2690487 (fetch: opportunistically update tracking refs,
2013-05-11), we stopped taking a non-storing refspec given on the
command line of "git fetch" literally, and instead started mapping
it via remote.$name.fetch refspecs. This allows
$ git fetch origin master
from the 'origin' repository, which is configured with
[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
to update refs/remotes/origin/master with the result, as if the
command line were
$ git fetch origin +master:refs/remotes/origin/master
to reduce surprises and improve usability. Before that change, a
refspec on the command line without a colon was only to fetch the
history and leave the result in FETCH_HEAD, without updating the
remote-tracking branches.
When you are simulating a fetch from you by your mothership with a
push by you into your mothership, instead of having:
[remote "satellite"]
fetch = +refs/heads/*:refs/remotes/satellite/*
on the mothership repository and running:
mothership$ git fetch satellite
you would have:
[remote "mothership"]
push = +refs/heads/*:refs/remotes/satellite/*
on your satellite machine, and run:
satellite$ git push mothership
Because we so far did not make the corresponding change to the push
side, this command:
satellite$ git push mothership master
does _not_ allow you on the satellite to only push 'master' out but
still to the usual destination (i.e. refs/remotes/satellite/master).
Implement the logic to map an unqualified refspec given on the
command line via the remote.$name.push refspec. This will bring a
bit more symmetry between "fetch" and "push".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we find two refspecs that want to update the same local reference,
emit an error message that is more informative based on whether one of
the conflicting refspecs is an opportunistic update during a fetch
with explicit command-line refspecs. And especially, do not die if an
opportunistic reference update conflicts with an express wish of the
user; rather, just emit a warning and skip the opportunistic reference
update.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the loop body into the more straightforward
* remove item from the front of the old list
* if necessary, add it to the tail of the new list
and return a pointer to the new list (even though it is currently
always the same as the input argument, because the first element in
the list is currently never deleted).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code called string_list_lookup(), and if that failed called
string_list_insert(), thus doing the bisection search through the
string list twice in the latter code path.
Instead, just call string_list_insert() right away. If an entry for
that peer reference name already existed, then its util pointer is
always non-NULL.
Of course this doesn't change the fact that the repeated
string_list_insert() calls make the function scale like O(N^2) if the
input reference list is not already approximately sorted.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code could leak *expn_name if match_name_with_pattern()
succeeded but ignore_symref_update() returned true. So make sure that
*expn_name is freed in any case.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our default_remote_name starts at "origin", but may be
overridden by the config file. In the former case, we
allocate a new string, but in the latter case, we point to
the remote name in an existing "struct branch".
This gives the variable inconsistent free() semantics (we
are sometimes responsible for freeing the string and
sometimes pointing to somebody else's storage), and causes a
small leak when the allocated string is overridden by
config.
We can fix both by simply dropping the extra copy and
pointing to the string literal.
Noticed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
Allow a safer "rewind of the remote tip" push than blind "--force",
by requiring that the overwritten remote ref to be unchanged since
the new history to replace it was prepared.
The machinery is more or less ready. The "--force" option is again
the big red button to override any safety, thanks to J6t's sanity
(the original round allowed --lockref to defeat --force).
The logic to choose the default implemented here is fragile
(e.g. "git fetch" after seeing a failure will update the
remote-tracking branch and will make the next "push" pass,
defeating the safety pretty easily). It is suitable only for the
simplest workflows, and it may hurt users more than it helps them.
* jc/push-cas:
push: teach --force-with-lease to smart-http transport
send-pack: fix parsing of --force-with-lease option
t5540/5541: smart-http does not support "--force-with-lease"
t5533: test "push --force-with-lease"
push --force-with-lease: tie it all together
push --force-with-lease: implement logic to populate old_sha1_expect[]
remote.c: add command line option parser for "--force-with-lease"
builtin/push.c: use OPT_BOOL, not OPT_BOOLEAN
cache.h: move remote/connect API out of it
Allow fetch.prune and remote.*.prune configuration variables to be set,
and "git fetch" to behave as if "--prune" is given.
"git fetch" that honors remote.*.prune is fine, but I wonder if we
should somehow make "git push" aware of it as well. Perhaps
remote.*.prune should not be just a boolean, but a 4-way "none",
"push", "fetch", "both"?
* ms/fetch-prune-configuration:
fetch: make --prune configurable
In order to see what the current branch is tracking, one way is using
"git branch -v -v", but branches other than the current are also
reported. Another way is using "git status", such as:
$ git status
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
...
But this will not work if there is no change between the current
branch and its upstream. Always report upstream tracking info
even if there is no difference, so that "git status" is consistent
for checking tracking info for current branch. E.g.
$ git status
# On branch feature1
# Your branch is up-to-date with 'github/feature1'.
...
$ git status -bs
## feature1...github/feature1
...
$ git checkout feature1
Already on 'feature1'
Your branch is up-to-date with 'github/feature1'.
...
Also add some test cases in t6040.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command "git branch -vv" will report tracking branches, but invalid
tracking branches are also reported. This is because the function
stat_tracking_info() can not distinguish invalid tracking branch
from other cases which it would not like to report, such as
there is no upstream settings at all, or nothing is changed between
one branch and its upstream.
Junio suggested missing upstream should be reported [1] like:
$ git branch -v -v
master e67ac84 initial
* topic 3fc0f2a [topicbase: gone] topic
$ git status
# On branch topic
# Your branch is based on 'topicbase', but the upstream is gone.
# (use "git branch --unset-upstream" to fixup)
...
$ git status -b -s
## topic...topicbase [gone]
...
In order to do like that, we need to distinguish these three cases
(i.e. no tracking, with configured but no longer valid tracking, and
with tracking) in function stat_tracking_info(). So the refactored
function stat_tracking_info() has three return values: -1 (with "gone"
base), 0 (no base), and 1 (with base).
If the caller does not like to report tracking info when nothing
changed between the branch and its upstream, simply checks if
num_theirs and num_ours are both 0.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/231830/focus=232288
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the deepest part of the callchain for "git push" (and
"git send-pack") to enforce "the old value of the ref must be this,
otherwise fail this push" (aka "compare-and-swap" / "--lockref").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This plugs the push_cas_option data collected by the command line
option parser to the transport system with a new function
apply_push_cas(), which is called after match_push_refs() has
already been called.
At this point, we know which remote we are talking to, and what
remote refs we are going to update, so we can fill in the details
that may have been missing from the command line, such as
(1) what abbreviated refname the user gave us matches the actual
refname at the remote; and
(2) which remote-tracking branch in our local repository to read
the value of the object to expect at the remote.
to populate the old_sha1_expect[] field of each of the remote ref.
As stated in the documentation, the use of remote-tracking branch
as the default is a tentative one, and we may come up with a better
logic as we gain experience.
Still nobody uses this information, which is the topic of the next
patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git push" and "git send-pack" to parse this commnd line
option.
The intended sematics is:
* "--force-with-lease" alone, without specifying the details, will
protect _all_ remote refs that are going to be updated by
requiring their current value to be the same as some reasonable
default, unless otherwise specified;
* "--force-with-lease=refname", without specifying the expected
value, will protect that refname, if it is going to be updated,
by requiring its current value to be the same as some reasonable
default.
* "--force-with-lease=refname:value" will protect that refname, if
it is going to be updated, by requiring its current value to be
the same as the specified value; and
* "--no-force-with-lease" will cancel all the previous --force-with-lease on the
command line.
For now, "some reasonable default" is tentatively defined as "the
value of the remote-tracking branch we have for the ref of the
remote being updated", and it is an error if we do not have such a
remote-tracking branch. But this is known to be fragile, its use is
not yet recommended, and hopefully we will find more reasonable
default as we gain experience with this feature. The manual marks
the feature as experimental unless the expected value is specified
explicitly for this reason.
Because the command line options are parsed _before_ we know which
remote we are pushing to, there needs further processing to the
parsed data after we instantiate the transport object to:
* expand "refname" given by the user to a full refname to be
matched with the list of "struct ref" used in match_push_refs()
and set_ref_status_for_push(); and
* learning the actual local ref that is the remote-tracking branch
for the specified remote ref.
Further, some processing need to be deferred until we find the set
of remote refs and match_push_refs() returns in order to find the
ones that need to be checked after explicit ones have been processed
for "--force-with-lease" (no specific details).
These post-processing will be the topic of the next patch.
This option was originally called "cas" (for "compare and swap"),
the name which nobody liked because it was too technical. The
second attempt called it "lockref" (because it is conceptually like
pushing after taking a lock) but the word "lock" was hated because
it implied that it may reject push by others, which is not the way
this option works. This round calls it "force-with-lease". You
assume you took the lease on the ref when you fetched to decide what
the rebased history should be, and you can push back only if the
lease has not been broken.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without "git fetch --prune", remote-tracking branches for a branch
the other side already has removed will stay forever. Some people
want to always run "git fetch --prune".
To accommodate users who want to either prune always or when fetching
from a particular remote, add two new configuration variables
"fetch.prune" and "remote.<name>.prune":
- "fetch.prune" allows to enable prune for all fetch operations.
- "remote.<name>.prune" allows to change the behaviour per remote.
The latter will naturally override the former, and the --[no-]prune
option from the command line will override the configured default.
Since --prune is a potentially destructive operation (Git doesn't
keep reflogs for deleted references yet), we don't want to prune
without users consent, so this configuration will not be on by
default.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing to repositories with many refs employed O(m*n) algorithm
where n is the number of refs on the receiving end.
* bc/push-match-many-refs:
remote.c: avoid O(m*n) behavior in match_push_refs
The definition of "struct ref" in "cache.h", a header file so
central to the system, always confused me. This structure is not
about the local ref used by sha1-name API to name local objects.
It is what refspecs are expanded into, after finding out what refs
the other side has, to define what refs are updated after object
transfer succeeds to what values. It belongs to "remote.h" together
with "struct refspec".
While we are at it, also move the types and functions related to the
Git transport connection to a new header file connect.h
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing using a matching refspec or a pattern refspec, each ref
in the local repository must be paired with a ref advertised by the
remote server. This is accomplished by using the refspec to transform
the name of the local ref into the name it should have in the remote
repository, and then performing a linear search through the list of
remote refs to see if the remote ref was advertised by the remote
system.
Each of these lookups has O(n) complexity and makes match_push_refs()
be an O(m*n) operation, where m is the number of local refs and n is
the number of remote refs. If there are many refs 100,000+, then this
ref matching can take a significant amount of time. Let's prepare an
index of the remote refs to allow searching in O(log n) time and
reduce the complexity of match_push_refs() to O(m log n).
We prepare the index lazily so that it is only created when necessary.
So, there should be no impact when _not_ using a matching or pattern
refspec, i.e. when pushing using only explicit refspecs.
Dry-run push of a repository with 121,913 local and remote refs:
before after
real 1m40.582s 0m0.804s
user 1m39.914s 0m0.515s
sys 0m0.125s 0m0.106s
The creation of the index has overhead. So, if there are very few
local refs, then it could take longer to create the index than it
would have taken to just perform n linear lookups into the remote
ref space. Using the index should provide some improvement when
the number of local refs is roughly greater than the log of the
number of remote refs (i.e. m >= log n). The pathological case is
when there is a single local ref and very many remote refs.
Dry-run push of a repository with 121,913 remote refs and a single
local ref:
before after
real 0m0.525s 0m0.566s
user 0m0.243s 0m0.279s
sys 0m0.075s 0m0.099s
Using an index takes 41 ms longer, or roughly 7.8% longer.
Jeff King measured a no-op push of a single ref into a remote repo
with 370,000 refs:
before after
real 0m1.087s 0m1.156s
user 0m1.344s 0m1.412s
sys 0m0.288s 0m0.284s
Using an index takes 69 ms longer, or roughly 6.3% longer.
None of the measurements above required transferring any objects to
the remote repository. If the push required transferring objects and
updating the refs in the remote repository, the impact of preparing
the search index would be even smaller.
A similar operation is performed in the reverse direction when pruning
using a matching or pattern refspec. Let's avoid O(m*n) behavior in
the same way by lazily preparing an index on the local refs.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first line of the function checks that the remote-name contains a
slash ('/'), and sets the "slash" variable accordingly. The only caller
of read_branches_file() is remote_get_1(); the calling codepath is
guarded by valid_remote_nick(), which checks that the remote does not
contain a slash. Therefore, the "slash" variable can never be set:
remove the dead code that assumes otherwise.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable overrides `remote.pushdefault` and
`branch.<name>.remote` for pushes. When you pull from one
place (e.g. your upstream) and push to another place (e.g. your own
publishing repository), you would want to set `remote.pushdefault` to
specify the remote to push to for all branches, and use this option to
override it for a specific branch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable defines the default remote to push to,
and overrides `branch.<name>.remote` for all branches. It is useful
in the typical triangular-workflow setup, where the remote you're
fetching from is different from the remote you're pushing to.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, do_push() in push.c calls remote_get(), which gets the
configured remote for fetching and pushing. Replace this call with a
call to pushremote_get() instead, a new function that will return the
remote configured specifically for pushing. This function tries to
work with the string pushremote_name, before falling back to the
codepath of remote_get(). This patch has no visible impact, but
serves to enable future patches to introduce configuration variables
to set pushremote_name. For example, you can now do the following in
handle_config():
if (!strcmp(key, "remote.pushdefault"))
git_config_string(&pushremote_name, key, value);
Then, pushes will automatically go to the remote specified by
remote.pushdefault.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small segment where handle_config() parses the branch.remote
configuration variable can be simplified using git_config_string().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows requests to fetch objects at any tip of refs (including
hidden ones). It seems that there may be use cases even outside
Gerrit (e.g. $gmane/215701).
* jc/fetch-raw-sha1:
fetch: fetch objects by their exact SHA-1 object names
upload-pack: optionally allow fetching from the tips of hidden refs
fetch: use struct ref to represent refs to be fetched
parse_fetch_refspec(): clarify the codeflow a bit
The new option "--follow-tags" tells "git push" to push annotated
tags that are missing from the other side and that can be reached by
the history that is otherwise pushed out.
For example, if you are using the "simple", "current", or "upstream"
push, you would ordinarily push the history leading to the commit at
your current HEAD and nothing else. With this option, you would
also push all annotated tags that can be reached from that commit to
the other side.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ancient times, we used to disallow the same source ref to be
pushed to more than one places, e.g. "git push there master:master
master:naster" was disallowed. We later lifted this restriction
with db27ee6392 (send-pack: allow the same source to be pushed
more than once., 2005-08-06) and there no longer is anybody that
sets peer_ref for the source side of the ref list in the push
codepath since then.
Remove one leftover no-op in a loop that iterates over the source
side of ref list (i.e. our local ref) to see if it can/should be
sent to a matching destination ref while skipping ones that is
marked with peer_ref (which will never exist, so we do not skip
anything).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git fetch" to accept an exact SHA-1 object name the user may
obtain out of band on the LHS of a pathspec, and send it on a "want"
message when the server side advertises the allow-tip-sha1-in-want
capability.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most parts of the cascaded if/else if/... checked an allowable
condition but some checked forbidden conditions. This makes adding
new allowable conditions unnecessarily inconvenient.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve error and advice messages given locally when "git push"
refuses when it cannot compute fast-forwardness by separating these
cases from the normal "not a fast-forward; merge first and push
again" case.
* jc/push-reject-reasons:
push: finishing touches to explain REJECT_ALREADY_EXISTS better
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
push: further simplify the logic to assign rejection reason
push: further clean up fields of "struct ref"
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First compute the reason why this push would fail if done without
"--force", and then fail it by assigning that reason when the push
was not forced (or if there is no reason to require force, allow it
to succeed).
Record the fact that the push was forced in the forced_update field
only when the push would have failed without the option.
The code becomes shorter, less repetitive and easier to read this
way, especially given that the set of rejection reasons will be
extended in a later patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "nonfastforward" and "update" fields are only used while
deciding what value to assign to the "status" locally in a single
function. Remove them from the "struct ref".
The "requires_force" field is not used to decide if the proposed
update requires a --force option to succeed, or to record such a
decision made elsewhere. It is used by status reporting code that
the particular update was "forced". Rename it to "forced_update",
and move the code to assign to it around to further clarify how it
is used and what it is used for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix to stop "git push" complaining "target ref already
exists", when it is not the real reason the command rejected the
request (e.g. non-fast-forward).
* cr/push-force-tag-update:
push: fix "refs/tags/ hierarchy cannot be updated without --force"
When pushing to update a branch with a commit that is not a
descendant of the commit at the tip, a wrong message "already
exists" was given, instead of the correct "non-fast-forward", if we
do not have the object sitting in the destination repository at the
tip of the ref we are updating.
The primary cause of the bug is that the check in a new helper
function is_forwardable() assumed both old and new objects are
available and can be checked, which is not always the case.
The way the caller uses the result of this function is also wrong.
If the helper says "we do not want to let this push go through", the
caller unconditionally translates it into "we blocked it because the
destination already exists", which is not true at all in this case.
Fix this by doing these three things:
* Remove unnecessary not_forwardable from "struct ref"; it is only
used inside set_ref_status_for_push();
* Make "refs/tags/" the only hierarchy that cannot be replaced
without --force;
* Remove the misguided attempt to force that everything that
updates an existing ref has to be a commit outside "refs/tags/"
hierarchy.
The policy last one tried to implement may later be resurrected and
extended to ensure fast-forwardness (defined as "not losing
objects", extending from the traditional "not losing commits from
the resulting history") when objects that are not commit are
involved (e.g. an annotated tag in hierarchies outside refs/tags),
but such a logic belongs to "is this a fast-forward?" check that is
done by ref_newer(); is_forwardable(), which is now removed, was not
the right place to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --mirror" and fetch that uses other forms of refspec with
wildcard used to attempt to update a symbolic ref that match the
wildcard on the receiving end, which made little sense (the real ref
that is pointed at by the symbolic ref would be updated anyway).
Symbolic refs no longer are affected by such a fetch.
* jc/fetch-ignore-symref:
fetch: ignore wildcarded refspecs that update local symbolic refs
Avoid false error from an attempt to update local symbolic ref via
fetch.
* jc/fetch-ignore-symref:
fetch: ignore wildcarded refspecs that update local symbolic refs
Require "-f" for push to update a tag, even if it is a fast-forward.
* cr/push-force-tag-update:
push: allow already-exists advice to be disabled
push: rename config variable for more general use
push: cleanup push rules comment
push: clarify rejection of update to non-commit-ish
push: require force for annotated tags
push: require force for refs under refs/tags/
push: flag updates that require force
push: keep track of "update" state separately
push: add advice for rejected tag reference
push: return reject reasons as a bitset
In a repository cloned from somewhere else, you typically have a
symbolic ref refs/remotes/origin/HEAD pointing at the 'master'
remote-tracking ref that is next to it. When fetching into such a
repository with "git fetch --mirror" from another repository that
was similarly cloned, the implied wildcard refspec refs/*:refs/*
will end up asking to update refs/remotes/origin/HEAD with the
object at refs/remotes/origin/HEAD at the remote side, while asking
to update refs/remotes/origin/master the same way. Depending on the
order the two updates happen, the latter one would find that the
value of the ref before it is updated has changed from what the code
expects.
When the user asks to update the underlying ref via the symbolic ref
explicitly without using a wildcard refspec, e.g. "git fetch $there
refs/heads/master:refs/remotes/origin/HEAD", we should still let him
do so, but when expanding wildcard refs, it will result in a more
intuitive outcome if we simply ignore local symbolic refs.
As the purpose of the symbolic ref refs/remotes/origin/HEAD is to
follow the ref it points at (e.g. refs/remotes/origin/master), its
value would change when the underlying ref is updated.
Earlier commit da3efdb (receive-pack: detect aliased updates which
can occur with symrefs, 2010-04-19) fixed a similar issue for "git
push".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touch to allow the new advice message squelched
with an advice.* configuration variable.
* mm/status-push-pull-advise:
status: respect advice.statusHints for ahead/behind advice
If the user has unset advice.statusHints, we already
suppress the "use git reset to..." hints in each stanza. The
new "use git push to publish..." hint is the same type of
hint. Let's respect statusHints for it, rather than making
the user set yet another advice flag.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite to remove inter-dependencies amongst the rules.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushes must already (by default) update to a commit-ish due to the fast-
forward check in set_ref_status_for_push(). But rejecting for not being
a fast-forward suggests the situation can be resolved with a merge.
Flag these updates (i.e., to a blob or a tree) as not forwardable so the
user is presented with more appropriate advice.
While updating *from* a tag object is potentially destructive, updating
*to* a tag is not. Additionally, a push to the refs/tags/ hierarchy is
already excluded from fast-forwarding, and refs/heads/ is protected from
anything but commit objects by a check in write_ref_sha1(). Thus
someone fast-forwarding to a tag is probably not doing so by accident.
Since updating to a tag is benign and unlikely to cause confusion, allow
it in case someone finds the behavior useful.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not allow fast-forwarding of references that point to a tag object.
Updating from a tag is potentially destructive since it would likely
leave the tag dangling. Disallowing updates to a tag also makes sense
semantically and is consistent with the behavior of lightweight tags.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a flag for indicating an update to a reference requires force.
Currently the `nonfastforward` flag is used for this when generating the
status message. A separate flag insulates dependent logic from the
details of set_ref_status_for_push().
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the reference exists on the remote and it is not being removed, then
mark as an update. This is in preparation for handling tags (lightweight
and annotated) exceptionally.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Advising the user to fetch and merge only makes sense if the rejected
reference is a branch. If none of the rejections are for branches, just
tell the user the reference already exists.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a fetch refspec (or the result of applying wildcard on one), we
always want the RHS to map to something inside "refs/" hierarchy.
This was split out from discarded jc/maint-push-refs-all topic.
* jc/maint-fetch-tighten-refname-check:
get_fetch_map(): tighten checks on dest refs
The code to check the refname we store the fetched result locally did not
bother checking the first 5 bytes of it, presumably assuming that it
always begin with "refs/". For a fetch refspec (or the result of applying
wildcard on one), we always want the RHS to map to something inside
"refs/" hierarchy, so let's spell that rule out in a more explicit way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message from "git push $there :bogo" mentioned we tried
and failed to guess what ref is being deleted based on the LHS of
the refspec, which we don't.
# By Jeff King
* jk/push-delete-ref-error-message:
push: don't guess at qualifying remote refs on deletion
When we try to push a ref and the right-hand side of the
refspec does not find a match, we try to create it. If it is
not fully qualified, we try to guess where it would go in
the refs hierarchy based on the left-hand source side. If
the source side is not a ref, then we give up and give a
long explanatory message.
For deletions, however, this doesn't make any sense. We
would never want to create on the remote side, and if an
unqualified ref can't be matched, it is simply an error. The
current code handles this already because the left-hand side
is empty, and therefore does not give us a hint as to where
the right-hand side should go, and we properly error out.
Unfortunately, the error message is the long "we tried to
qualify this, but the source side didn't let us guess"
message, which is quite confusing.
Instead, we can just be more succinct and say "we can't
delete this because we couldn't find it". So before:
$ git push origin :bogus
error: unable to push to unqualified destination: bogus
The destination refspec neither matches an existing ref on the remote nor
begins with refs/, and we are unable to guess a prefix based on the source ref.
error: failed to push some refs to '$URL'
and now:
$ git push origin :bogus
error: unable to delete 'bogus': remote ref does not exist
error: failed to push some refs to '$URL'
It is tempting to also catch a fully-qualified ref like
"refs/heads/bogus" and generate the same error message.
However, that currently does not error out at all, and
instead gets sent to the remote side, which typically
generates a warning:
$ git push origin:refs/heads/bogus
remote: warning: Deleting a non-existent ref.
To $URL
- [deleted] bogus
While it would be nice to catch this error early, a
client-side error would mean aborting the push entirely and
changing push's exit code. For example, right now you can
do:
$ git push origin refs/heads/foo refs/heads/bar
and end up in a state where "foo" and "bar" are deleted,
whether both of them currently exist or not (and see an
error only if we actually failed to contact the server).
Generating an error would cause a regression for this use
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we store lists of refs as linked lists, we can use
llist_mergesort to efficiently sort them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing groups of refs to a remote, there is no simple way to remove
old refs that still exist at the remote that is no longer updated from us.
This will allow us to remove such refs from the remote.
With this change, running this command
$ git push --prune remote refs/heads/*:refs/remotes/laptop/*
removes refs/remotes/laptop/foo from the remote if we do not have branch
"foo" locally anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Will be useful in next patches. No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function match_name_with_pattern() is called twice, once to see if a
pattern matches with the name, and again to learn what the matched pattern
maps the name to. Since check_pattern_match() is only used in one place,
we can just reorganize it to make a single call and fetch the values at
the same time.
This changes the meaning of check_pattern_match() that used to check which
pattern in the array of refspecs matched the given ref, to return the name
of the remote ref the given ref is mapped to.
Rename it to get_ref_match() which actually describes more closely what
it's actually doing now.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can reuse src later on. No functional changes.
Will be useful in next patches.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function format_tracking_info in remote.c is called by
wt_status_print_tracking in wt-status.c, which will print
branch tracking message in git-status. git-checkout also
show these messages through it's report_tracking function.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer, which is not
safe for long-term use because if another resolve_ref() call happens,
the buffer may be changed. Many call sites though do not care about
this buffer. They simply check if the return value is NULL or not.
Convert all these call sites to new wrappers to reduce resolve_ref()
calls from 57 to 34. If we change resolve_ref() prototype later on
to avoid passing static buffer out, this helps reduce changes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cn/fetch-prune:
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
fetch: honor the user-provided refspecs when pruning refs
remote: separate out the remote_find_tracking logic into query_refspecs
t5510: add tests for fetch --prune
fetch: free all the additional refspecs
Conflicts:
remote.c
If the user gave us refspecs on the command line, we should use those
when deciding whether to prune a ref instead of relying on the
refspecs in the config.
Previously, running
git fetch --prune origin refs/heads/master:refs/remotes/origin/master
would delete every other ref under the origin namespace because we
were using the refspec to filter the available refs but using the
configured refspec to figure out if a ref had been deleted on the
remote. This is clearly the wrong thing to do.
Change prune_refs and get_stale_heads to simply accept a list of
references and a list of refspecs. The caller of either function needs
to decide what refspecs should be used to decide whether a ref is
stale.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the body of remote_find_tracking() to a new helper query_refspecs()
that finds a refspec that matches and applies the transformation, but
explicitly takes the list of refspecs, and make remote_find_tracking() a
thin wrapper of it.
Make apply_refspecs() also use query_refspecs().
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yes, there is a warning that says the function is only used by push in big
red letters in front of this function, but it didn't say a more important
thing it should have said: what the function is for and what it does.
Rename it and document it to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a useful function, and we have already made the
similar alloc_ref and copy_ref_list available.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The guess_remote_head function tries to figure out where a
remote's HEAD is pointing by comparing the sha1 of the
remote's HEAD with the sha1 of various refs found on the
remote. However, we were too liberal in matching refs, and
would match tags or remote tracking branches, even though
these things could not possibly be referenced by the HEAD
symbolic ref (since git will detach when checking them out).
As a result, a clone of a remote repository with a detached
HEAD might write "refs/tags/*" into our local HEAD, which is
bogus. The resulting HEAD should be detached.
The other related code path is remote.c's get_head_names()
(which is used for, among other things, "set-head -a"). This was
not affected, however, as that function feeds only refs from
refs/heads to guess_remote_head.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_lookup to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the "tagopt = --tags" option of a remote is set, all tags
will be fetched as in "git fetch --tags".
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic that detects up-to-date and non-fast-forward refs to a
new function in remote.[ch], set_ref_status_for_push().
Make transport_push() invoke set_ref_status_for_push() before invoking
the push_refs() implementation. (As a side-effect, the push_refs()
implementation in transport-helper.c now knows of non-fast-forward
pushes.)
Removed logic for detecting up-to-date refs from the push_refs()
implementation in transport-helper.c, as transport_push() has already
done so for it.
Make cmd_send_pack() invoke set_ref_status_for_push() before invoking
send_pack(), as transport_push() can't do it for send_pack() here.
Mark the test on the return status of non-fast-forward push to fail.
Git now exits with success, as transport.c::transport_push() does not
check for refs with status REF_STATUS_REJECT_NONFASTFORWARD nor does it
indicate rejected pushes with its return value.
Mark the test for ref status to succeed. As mentioned earlier, refs
might be marked as non-fast-forwards, triggering the push status
printing mechanism in transport.c.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sr/vcs-helper:
tests: handle NO_PYTHON setting
builtin-push: don't access freed transport->url
Add Python support library for remote helpers
Basic build infrastructure for Python scripts
Allow helpers to report in "list" command that the ref is unchanged
Fix various memory leaks in transport-helper.c
Allow helper to map private ref names into normal names
Add support for "import" helper command
Allow specifying the remote helper in the url
Add a config option for remotes to specify a foreign vcs
Allow fetch to modify refs
Use a function to determine whether a remote is valid
Allow programs to not depend on remotes having urls
Fix memory leak in helper method for disconnect
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
* bg/fetch-multi:
Re-implement 'git remote update' using 'git fetch'
builtin-fetch: add --dry-run option
builtin-fetch: add --prune option
teach warn_dangling_symref to take a FILE argument
remote: refactor some logic into get_stale_heads()
Add missing test for 'git remote update --prune'
Add the configuration option skipFetchAll
Teach the --multiple option to 'git fetch'
Teach the --all option to 'git fetch'
This allows a helper to say that, when it handles "import
refs/heads/topic", the script it outputs will actually write to
refs/svn/origin/branches/topic; therefore, transport-helper should
read it from the latter location after git-fast-import completes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If this is set, the url is not required, and the transport always uses
a helper named "git-remote-<value>".
It is a separate configuration option in order to allow a sensible
configuration for foreign systems which either have no meaningful urls
for repositories or which require urls that do not specify the system
used by the repository at that location. However, this only affects
how the name of the helper is determined, not anything about the
interaction with the helper, and the contruction is such that, if the
foreign scm does happen to use a co-named url method, a url with that
method may be used directly.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, it only checks url, but it will allow other things in the future.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ref_remove_duplicates, when we encounter a duplicate and remove it
from the list we need to make sure that the prev pointer stays
pointing at the last entry and also skip over adding the just freed
entry to the string_list.
Previously fetch could crash with:
*** glibc detected *** git: corrupted double-linked list: ...
Also add a test to try and catch problems with duplicate removal in
the future.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic in builtin-remote.c which determines which local heads are stale
to remote.c so it can be used by other builtins.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the configuration skipFetchAll option to allow
certain remotes to be skipped when doing 'git fetch --all' and
'git remote update'. The existing skipDefaultUpdate variable
is still honored (by 'git fetch --all' and 'git remote update').
(If both are set in the configuration file with different values,
the value of the last occurrence will be used.)
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_remove_duplicates function was very slow at dealing with very
large numbers of refs. This is because it was using a linear search
through all remaining refs to find any duplicates of the current ref.
Rewriting it to use a string list to keep track of which refs have
already been seen and removing duplicates when they are found is much
more efficient.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote.c has a global set of URL rewrites, accessed by alias_url and
make_rewrite. Wrap them in a new "struct rewrites", passed to alias_url
and make_rewrite. This allows adding other sets of rewrites.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The majority of code in core git appears to use a single
space after if/for/while. This is an attempt to bring more
code to this standard. These are entirely cosmetic changes.
Signed-off-by: Brian Gianforcaro <b.gianfo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
Previously, the refspec "<src>:" would be expanded to
"<src>:refs/heads/". Instead, treat an empty <dst> just like refspecs
without a colon.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid code duplication by moving list tail search to match_refs().
This does not change the semantics, except for http-push, which now inserts
to the front of the ref list in order to get rid of the global remote_tail.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stat_tracking_info() assumes that upstream references (as specified by
--track or set up automatically) are commits. By calling lookup_commit()
on them, create_objects() creates objects for them with type commit no
matter what their real type is; this disturbs lookup_tag() later on in the
call sequence, leading to git status, git branch -v and git checkout
erroring out.
Fix this by using lookup_commit_reference() instead so that (annotated)
tags can be used as upstream references.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the config file contains a section like this:
[remote]
default = foo
(it should be '[remotes]') then commands like
git status
git checkout
git branch -v
fail even though they are not obviously related to remotes. (These
commands write "ahead, behind" information and, therefore, access the
per-remote information).
Unknown configuration keys should be ignored, not trigger errors.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new shorten_unambiguous_ref() for simplifying the output of
upstream branch names. This affects status and checkout.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
it's silly to do this:
mkdir foo && cd foo && git init && git push somewhere.git
but segfault should not happen even in that case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fg/remote-prune:
add tests for remote groups
git remote update: Fallback to remote if group does not exist
remote: New function remote_is_configured()
git remote update: Report error for non-existing groups
git remote update: New option --prune
builtin-remote.c: Split out prune_remote as a separate function.
Previously, there was no easy way to check for the existence of a
configured remote. remote_get for example would always create the remote
"on demand".
This new function returns 1 if the remote is configured, 0 otherwise.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sure that local branches, when followed using --track, behave
the same as remote ones (e.g. differences being reported by git status
and git checkout). This fixes 1 known failure.
The fix is done within branch_get(): The first natural candidate,
namely remote_find_tracking(), does not have all the necessary info
because in general there is no remote struct for '.', and we don't want
one because it would show up in other places as well.
branch_get(), on the other hand, has access to merge_names[] (in
addition to merge[]) and therefore can set up the followed branch
easily.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* xx/db-refspec-vs-js-remote:
Support '*' in the middle of a refspec
Keep '*' in pattern refspecs
Use the matching function to generate the match results
Use a single function to match names against patterns
Make clone parse the default refspec with the normal code
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
The config file is not the only place remotes are defined, and without
consulting .git/remotes and .git/branches, you won't know if "origin" is
configured by the user. Don't give up too early and insult the user with
a wisecrack "Where do you want to fetch from today?"
The only thing the previous patch seems to want to prevent from happening
is a lazy "git fetch/push" that does not say where-from/to to produce an
error message 'origin not found', and we can do that by not letting
add_url_alias() to turn a nickname "origin" literally into a pathname
"origin" without changing the rest of the logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were always overwritten or the assigned
value was unused:
builtin-diff-tree.c::cmd_diff_tree(): nr_sha1
builtin-for-each-ref.c::opt_parse_sort(): sort_tail
builtin-mailinfo.c::decode_header_bq(): in
builtin-shortlog.c::insert_one_record(): len
connect.c::git_connect(): path
imap-send.c::v_issue_imap_cmd(): n
pretty.c::pp_user_info(): filler
remote::parse_refspec_internal(): llen
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there's no explicitly-named remote, we use the remote specified
for the current branch, which in turn defaults to "origin". But it
this case should require the remote to actually be configured, and not
fall back to the path "origin".
Possibly, the config file's "remote = something" should require the
something to be a configured remote instead of a bare repository URL,
but we actually test with a bare repository URL.
In fetch, we were giving the sensible error message when coming up
with a URL failed, but this wasn't actually reachable, so move that
error up and use it when appropriate.
In push, we need a new error message, because the old one (formerly
unreachable without a lot of help) used the repo name, which was NULL.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter topic changes the definition of how refspec's src and dst side
is stored in-core; it used to be that the asterisk for pattern was
omitted, but now it is included. The former topic handcrafts an old style
refspec to feed the refspec matching machinery that lacks the asterisk and
triggers an error.
This resolves the semantic clash between the two topics early before they
need to be merged to integration branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to keep the requirements strict, each * has to be a full path
component, and there may only be one * per side. This requirement is
enforced entirely by check_ref_format(); the matching implementation
will substitute the whatever matches the * in the lhs for the * in the
rhs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to do anything more capable with refspecs, the first step is
to keep the entire input. Additionally, validate patterns by checking
for the ref matching the rules for a pattern as given by
check_ref_format(). This requires a slight change to
check_ref_format() to make it enforce the requirement that the '*'
immediately follow a '/'.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts all of the interpretation of the pattern representation in a
single function for easy manipulation.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stat_tracking_info() in remote.c is used to collect the statistics to
be able to say (for instance) from the output of "git checkout':
Your branch and 'foo' have diverged,
and have X and Y different commit(s) each, respectively.
Currently X and Y also includes the count of merges. This patch
excludes the merges from being counted.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual method for determining the ref pointed to by HEAD
is to compare HEAD's sha1 to the sha1 of all refs, trying to
find a unique match.
However, some transports actually get to look at HEAD
directly; we should make use of that information when it is
available. Currently, only http remotes support this
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
