Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$COLUMNS must be unset to not interfere with the tests. The tests
already ignore the terminal size because output is redirected to a
file, but COLUMNS overrides terminal size detection and changes the
test output away from the standard 80.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge-recursive detects renames so that if one side modifies
"foo" and the other side moves it to "bar", the modification
is applied to "bar". However, our rename detection is based
on content analysis, it can be wrong (i.e., two files were
not intended as a rename, but just happen to have the same
or similar content).
This is quite rare if the files actually contain content,
since two unrelated files are unlikely to have exactly the
same content. However, empty files present a problem, in
that there is nothing to analyze. An uninteresting
placeholder file with zero bytes may or may not be related
to a placeholder file with another name.
The result is that adding content to an empty file may cause
confusion if the other side of a merge removed it; your
content may end up in another random placeholder file that
was added.
Let's err on the side of caution and not consider empty
files as renames. This will cause a modify/delete conflict
on the merge, which will let the user sort it out
themselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to make sure that the three-dash separator lines appear
after the graph ancestry lines, and also the graph ancestry lines
are not broken between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool relies on the ability to forward unknown arguments
to the git-diff command. Add a test to ensure that this works
as advertised.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrew Sayers noticed that the svn-fe | git fast-import pipeline
mishandles a subversion history that copies the root directory to a
sub-directory (e.g. doing `svn cp . trunk` to standardise your
layout). As David Barr explained, the bug arises when the following
command is sent to git fast-import:
'ls' SP ':1' SP LF
Instead of reading back what is at the root of r1, it unconditionally
reports the path as missing.
After sleeping on it, here are two patches for 'maint'. One plugs a
memory leak. The other ensures that trying to pass an empty path to
the 'ls' command results in an error message that can help the
frontend author instead of the silently broken conversion Andrew
found.
Then we can carefully add 'ls ""' support in 1.7.11.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=wrup
-----END PGP SIGNATURE-----
Merge "two fixes for fast-import's 'ls' command" from Jonathan
Andrew Sayers noticed that the svn-fe | git fast-import pipeline
mishandles a subversion history that copies the root directory to a
sub-directory (e.g. doing `svn cp . trunk` to standardise your
layout). As David Barr explained, the bug arises when the following
command is sent to git fast-import:
'ls' SP ':1' SP LF
Instead of reading back what is at the root of r1, it unconditionally
reports the path as missing.
After sleeping on it, here are two patches for 'maint'. One plugs a
memory leak. The other ensures that trying to pass an empty path to
the 'ls' command results in an error message that can help the
frontend author instead of the silently broken conversion Andrew
found.
Then we can carefully add 'ls ""' support in 1.7.11.
* commit 'refs/pull-request-tags/jn/maint-fast-import-empty-ls':
fast-import: don't allow 'ls' of path with empty components
fast-import: leakfix for 'ls' of dirty trees
remove_dir_recursively() has a check to avoid removing the directory it
was asked to remove without recursing into it and report success when the
directory is the top level of a working tree of a nested git repository,
to protect such a repository from "clean -f" (without double -f). If a
working tree of a nested git repository is in a subdirectory of a toplevel
project, however, this protection did not apply by mistake; we forgot to
pass the REMOVE_DIR_KEEP_NESTED_GIT down to the recursive removal
codepath.
This requires us to also teach the higher level not to remove the
directory it is asked to remove, when the recursed invocation did not
remove the directory it was asked to remove due to a nested git
repository, as it is not an error to leave the parent directories of such
a nested repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a manual notes merge is committed or aborted, we need to remove the
temporary worktree at .git/NOTES_MERGE_WORKTREE. However, removing the
entire directory is not good if the user ran the 'git notes merge
--commit/--abort' from within that directory. On Windows, the directory
removal would simply fail, while on POSIX systems, users would suddenly
find themselves in an invalid current directory.
Therefore, instead of deleting the entire directory, we delete everything
_within_ the directory, and leave the (empty) directory in place.
This would cause a subsequent notes merge to abort, complaining about a
previous - unfinished - notes merge (due to the presence of
.git/NOTES_MERGE_WORKTREE), so we also need to adjust this check to only
trigger when .git/NOTES_MERGE_WORKTREE is non-empty.
Finally, adjust the t3310 manual notes merge testcases to correctly handle
the existence of an empty .git/NOTES_MERGE_WORKTREE directory.
Inspired-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes_merge_commit() only needs to list all entries (non-recursively)
under a directory, which can be easily accomplished with
opendir/readdir and would be more lightweight than read_directory().
read_directory() is designed to list paths inside a working
directory. Using it outside of its scope may lead to undesired effects.
Apparently, one of the undesired effects of read_directory() is that it
doesn't deal with being given absolute paths. This creates problems for
notes_merge_commit() when git_path() returns an absolute path, which
happens when the current working directory is in a subdirectory of the
.git directory.
Originally-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Updated-by: Johan Herland <johan@herland.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git notes merge' command expected to be run from the working
tree of the project being annotated, and did not anticipate getting
run inside $GIT_DIR/.
However, because we use $GIT_DIR/NOTES_MERGE_WORKTREE as a temporary
working space for the user to work on resolving conflicts, it is not
unreasonable for a user to run "git notes merge --commit" there. But
the command fails to do so.
Found-by: David Bremner <david@tethera.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit message which added those tests (861444f 't: add test
harness for external credential helpers' 2011-12-10) provided nice
documentation in the commit message. Let's make it more visible
by putting it in the test description.
The documentation is updated to reflect the fact that
GIT_TEST_CREDENTIAL_HELPER must be set for
GIT_TEST_CREDENTIAL_HELPER_TIMEOUT to be used
and GIT_TEST_CREDENTIAL_HELPER_SETUP can be used.
Based-on-commit-message-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0300-credential-helpers.sh requires GIT_TEST_CREDENTIAL_HELPER to be
configured to do something sensible. If it is not set, prove will say:
./t0303-credential-external.sh .. skipped: (no reason given)
which isn't very nice.
Use skip_all="..." && test_done to bail out immediately and provide a
nicer message. In case GIT_TEST_CREDENTIAL_HELPER is set, but the
timeout tests are skipped, mention GIT_TEST_CREDENTIAL_HELPER_TIMEOUT.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using word diff, the code sets the word_regex from various
defaults if it was not set already. The problem is that it does this
on the original diff_options, which will also be used in subsequent
diffs.
This means that when the word_regex is not given on the command line,
only the first diff for which a setting for word_regex (either from
attributes or diff.wordRegex) ever takes effect. This value then
propagates to the rest of the diff runs and in particular prevents
further attribute lookups.
Fix the problem of changing diff state once and for all, by working
with a _copy_ of the diff_options.
Noticed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case applies a custom wordRegex to one file in a diff, and expects
that the default word splitting applies to the second file in the diff.
But the custom wordRegex is also incorrectly used for the second file.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we already walk the history of the branch that gets merged to
come up with a short log, let's label it with names of the primary
authors, so that the user who summarizes the merge can easily give
credit to them in the log message.
Also infer the names of "lieutents" to help integrators at higher
level of the food-chain to give credit to them, by counting:
* The committer of the 'tip' commit that is merged
* The committer of merge commits that are merged
Often the first one gives the owner of the history being pulled, but
his last pull from his sublieutenants may have been a fast-forward,
in which case the first one would not be. The latter rule will
count the integrator of the history, so together it might be a
reasonable heuristics.
There are two special cases:
- The "author" credit is omitted when the series is written solely
by the same author who is making the merge. The name can be seen
on the "Author" line of the "git log" output to view the log
message anyway.
- The "lieutenant" credit is omitted when there is only one key
committer in the merged branch and it is the committer who is
making the merge. Typically this applies to the case where the
developer merges his own branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These changes are in the same spirit as the six patches that
precede them, but they haven't been split into individually
justifiable patches yet.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git's --stat output is intended for humans and since v1.7.9.2~13
(2012-02-01) varies by locale. The tests in this script using "apply
--stat" are meant to check two things:
- how binary file changes are accounted for and printed in
git's diffstat format
- that "git apply" can parse the various forms of binary diff
Split these two kinds of check into separate tests, and use --numstat
instead of --stat in the latter. This way, we lose less test coverage
when git is being run without writing its output in the C locale (for
example because GETTEXT_POISON is enabled) and there are fewer tests
to change if the --stat output needs to be tweaked again.
While at it, use commands separated by && that read and write to
temporary files in place of pipelines so segfaults and other failures
in the upstream of the processing pipeline don't get hidden.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git's diff --stat output is intended for human consumption and
since v1.7.9.2~13 (2012-02-01) varies by locale. Add a test checking
that git stash show defaults to --stat and tweak the rest of the
"stash show" tests that showed a diffstat to use numstat.
This way, there are fewer tests to tweak if the diffstat format
changes again. This also improves test coverage when running tests
with git configured not to write its output in the C locale (e.g.,
via GETTEXT_POISON=Yes).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.3-rc0~26^2~9 (revert: report success when using option
--strategy, 2010-07-14), the cherry-pick-many-commits test checks the
format of output written to the terminal during a cherry-pick sequence
in addition to the functionality. There is no reason those have to
be checked in the same test, though, and it has some downsides:
- when progress output is broken, the test result does not convey
whether the functionality was also broken or not
- it is not immediately obvious when reading that these checks are
meant to prevent regressions in details of the output format and
are not just a roundabout way to check functional details like the
number of commits produced
- there is a temptation to include the same kind of output checking
for every new cherry-pick test, which would make future changes
to the output unnecessarily difficult
Put the tests from v1.7.3-rc0~26^2~9 in separate assertions, following
the principle "test one feature at a time".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one of the early tests, so it uses a style that by modern
standards can be hard to read. Tweak it to:
- clearly declare what assertion each test is designed to check
- mark tests that create state later tests will depend on with the
word "setup" so people writing or running tests know the others
can be skipped or reordered safely
- put commands that populate a file with expected output inside
the corresponding test stanza, so it is easier to see by eye
where each test begins and ends
- instead of pipelines, use commands that read and write a
temporary file, so bugs causing commands to segfault or produce
the wrong exit status can be caught.
More cosmetic changes:
- put the opening quote starting each test on the same line as the
test_expect_* invocation, and indent the commands in each test
with a single tab
- end the test early if the underlying filesystem cannot
accomodate the filenames we use, instead of marking all tests
with the same TABS_IN_FILENAMES prerequisite.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test script checks that git's plumbing commands quote filenames
with special characters like space, tab, and double-quote
appropriately in their input and output.
Since commit v1.7.9.2~13 (Use correct grammar in diffstat summary
line, 2012-02-01), the final "1 file changed, 1 insertion(+)" line
from diffstats is translatable, meaning tests that rely on exact "git
apply --stat" output have to be skipped when git is not configured to
produce output in the C locale (for example, when GETTEXT_POISON is
enabled). So:
- Tweak the three "git apply --stat" tests that check "git apply"'s
input parsing to use --numstat instead.
--numstat output is more reliable, does not vary with locale, and
is itself easier to parse. These tests are mainly about how "git
apply" parses its input so this should not result in much loss of
coverage.
- Add a new "apply --stat" test to check the quoting in --stat output
format.
This wins back a little of the test coverage lost with the patch
"test: use test_i18ncmp to check --stat output" when GETTEXT_POISON is
enabled.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since v1.7.9.2~13 (2012-02-01), git's diffstat-style summary line
produced by "git apply --stat", "git diff --stat", and "git commit"
varies by locale, producing test failures when GETTEXT_POISON is set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was unclear what a test in t0204 wanted to check; it turns out
that it was only to observe an undefined behaviour of the system,
and did not anticipate one kind of reasonable error behaviour.
* jc/maint-undefined-i18n-observation-test:
t0204: clarify the "observe undefined behaviour" test
When "git config" diagnoses an error in a configuration file and
shows the line number for the offending line, it miscounted if the
error was at the end of line.
By Martin Stenberg
* ms/maint-config-error-at-eol-linecount:
config: report errors at the EOL with correct line number
Conflicts:
t/t1300-repo-config.sh
"git bundle" did not record boundary commits correctly when there
are many of them.
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
"git diff-index" and its friends at the plumbing level showed the
"diff --git" header and nothing else for a path whose cached stat
info is dirty without actual difference when asked to produce a
patch. This was a longstanding bug that we could have fixed long
time ago.
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
The code to synthesize the fake ancestor tree used by 3-way merge
fallback in "git am" was not prepared to read a patch created with
a non-standard -p<num> value.
* jc/am-3-nonstandard-popt:
test: "am -3" can accept non-standard -p<num>
am -3: allow nonstandard -p<num> option
A section in a config file with a missing "]" reports the next line
as bad, same goes to a value with a missing end quote.
This happens because the error is not detected until the end of the
line, when line number is already increased. Fix this by decreasing
line number by one for these cases.
Signed-off-by: Martin Stenberg <martin@gnutiken.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When lying the author name via GIT_AUTHOR_NAME environment variable
to "git commit", the hooks run by the command saw it and could act
on the name that will be recorded in the final commit. When the user
uses the "--author" option from the command line, the command should
give the same information to the hook, and back when "git command"
was a scripted Porcelain, it did set the environment variable and
hooks can learn the author name from it.
However, when the command was reimplemented in C, the rewritten code
was not very faithful to the original, and hooks stopped getting the
authorship information given with "--author". Fix this by exporting
the necessary environment variables.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--author" option is used to lie the authorship to "git commit"
command, hooks should learn the author name and email just like when
GIT_AUTHOR_NAME and GIT_AUTHOR_EMAIL environment variables are used
to lie the authorship. Test this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the fast-import manual explains:
The value of <path> must be in canonical form. That is it must
not:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid),
Unfortunately the "ls" command accepts these invalid syntaxes and
responds by declaring that the indicated path is missing. This is too
subtle and causes importers to silently misbehave; better to error out
so the operator knows what's happening.
The C, R, and M commands already error out for such paths.
Reported-by: Andrew Sayers <andrew-git@pileofstuff.org>
Analysis-by: David Barr <davidbarr@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This test asks for an impossible conversion to the system by
preparing an UTF-8 translation with characters that cannot be
expressed in ISO-8859-1, and then asking the message shown in
ISO-8859-1. Even though the behaviour against such a request is
undefined, it may be interesting to see what the system does, and
the purpose of this test is to see if there are platforms that
exhibit behaviour that we haven't seen.
The original recognized two known modes of behaviour:
- the key used to query the message catalog ("TEST: Old English
Runes"), saying "I cannot do that i18n".
- impossible characters replaced with ASCII "?", saying "I punt".
but they were treated totally differently. The test simply issued
an informational message "Your system punts on this one" for the
first error mode, while it diagnosed the latter as "Your system is
good; you pass!".
It turns out that Mac OS X exhibits a third mode of error behaviour,
to spew out the raw value stored in the message catalog. The test
diagnosed this behaviour as "broken", but it is merely trying to do
its best to respond to an impossible request by saying "I punt" in a
way that is slightly different from the second one.
Update the offending test to make it clear what is (and is not)
being tested, update the code structure so that newly discovered
error mode can easily be added to it later, and reword the message
that comes from a failing case to clarify that it is not the system
that is broken when it fails, but merely that the behaviour is not
something we have seen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'log -3000 (baseline)' test accidentally still used -1000 from an
earlier version.
Noticed-by: Lawrence Holding <Lawrence.Holding@cubic.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jens Lehmann (3) and Johannes Sixt (1)
* jl/maint-submodule-relative:
submodules: fix ambiguous absolute paths under Windows
submodules: refactor computation of relative gitdir path
submodules: always use a relative path from gitdir to work tree
submodules: always use a relative path to gitdir
The only bug right now is that $GIT_TEST_CMP is needed for test_cmp to
work.
However, we also export the three most important paths for tests:
TEST_DIRECTORY
TRASH_DIRECTORY
GIT_BUILD_DIR
Since they are available within test_expect_success, a future test
writer may expect them to also be defined in test_perf.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Loading it in the subshells still referred to $TEST_DIRECTORY/..,
which was only correct in preliminary versions of perf-lib.sh
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
This command indirectly calls check_sha1_signature() (add_info_ref ->
deref_tag -> parse_object -> ..) , which may put whole blob in memory
if the blob's size is under core.bigfilethreshold. As config is not
read, the threshold is always 512MB. Respect user settings here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test cases list commands that should work when memory is
limited. All memory allocation functions (*) learn to reject any
allocation larger than $GIT_ALLOC_LIMIT if set.
(*) Not exactly all. Some places do not use x* functions, but
malloc/calloc directly, notably diff-delta. These code path should
never be run on large blobs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
OS X's sed and grep would complain with (respectively)
sed: 1: "/^-/{p;q}": extra characters at the end of q command
grep: Regular expression too big
For sed, use an explicit ; to terminate the q command.
For grep, spell the "40 hex digits" explicitly in the regex, which
should be safe as other tests already use this and we haven't got
breakage reports on OS X about them.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
8c912ee (teach --histogram to diff, 2011-07-12) claimed histogram diff
was faster than both Myers and patience.
We have since incorporated a performance testing framework, so add a
test that compares the various diff tasks performed in a real 'log -p'
workload. This does indeed show that histogram diff slightly beats
Myers, while patience is much slower than the others.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message is too long and at too low a level for anybody
to understand it if they don't know about the configuration format
already.
The text about setting up a remote is superfluous and doesn't help
understand or recover from the error that has happened. Show the
usage more prominently and explain how to set up the tracking
information. If there is only one remote, that name is used instead
of the generic <remote>.
Also simplify the message we print on detached HEAD to remove
unnecessary information which is better left for the documentation.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
In module_clone() the rel_gitdir variable was computed differently when
"git rev-parse --git-dir" returned a relative path than when it returned
an absolute path. This is not optimal, as different code paths are used
depending on the return value of that command.
Fix that by reusing the differing path components computed for setting the
core.worktree config setting, which leaves a single code path for setting
both instead of having three and makes the code much shorter.
This also fixes the bug that in the computation of how many directories
have to be traversed up to hit the root directory of the submodule the
name of the submodule was used where the path should have been used. This
lead to problems after renaming submodules into another directory level.
Even though the "(cd $somewhere && pwd)" approach breaks the flexibility
of symlinks, that is no issue here as we have to have one relative path
pointing from the work tree to the gitdir and another pointing back, which
will never work anyway when a symlink along one of those paths is changed
because the directory it points to was moved.
Also add a test moving a submodule into a deeper directory to catch any
future breakage here and to document what has to be done when a submodule
needs to be moved until git mv learns to do that. Simply moving it to the
new location doesn't work, as the core.worktree and possibly the gitfile
setting too will be wrong. So it has to be removed from filesystem and
index, then the new location has to be added into the index and the
.gitmodules file has to be updated. After that a git submodule update will
check out the submodule at the new location.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. To make that work the git directory has
the core.worktree configuration set in its config file to point back to
the work tree.
That core.worktree is an absolute path set by the initial clone of the
submodule. A relative path is preferable here because it allows the
superproject to be moved around without invalidating that setting, so
compute and set that relative path after cloning or reactivating the
submodule.
This also fixes a bug when moving a submodule around inside the
superproject, as the current code forgot to update the setting to the new
submodule work tree location.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident and that moving a superproject won't break submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. When the submodule git directory needs
to be cloned because it is not found in .git/modules/<name> the clone
command will write an absolute path into the gitfile. When no clone is
necessary the git directory will be reactivated by the git-submodule.sh
script by writing a relative path into the gitfile.
This is inconsistent, as the behavior depends on the submodule having been
cloned before into the .git/modules of the superproject. A relative path
is preferable here because it allows the superproject to be moved around
without invalidating the gitfile. We do that by always writing the
relative path into the gitfile, which overwrites the absolute path the
clone command may have written there.
This is only the first step to make superprojects movable again like they
were before the separate-git-dir approach was introduced. The second step
is to use a relative path in core.worktree too.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident.
While at it also replace an if/else construct evaluating the presence
of the 'reference' option with a single line of bash code.
Reported-by: Antony Male <antony.male@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user specifies a long option but forgets to type the second
leading dash, we currently detect and report that fact if its first
letter is a valid short option. This is done for safety, to avoid
ambiguity between short options (and their arguments) and a long
option with a missing dash.
This diagnostic message is also helpful for long options whose first
letter is not a valid short option, however. Print it in that case,
too, as a courtesy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct 'while IFS== read' makes dash 0.5.6 execute
read without changing IFS, which results in test breakages
all over the place in t0300. Neither dash 0.5.5.1 and older
nor dash 0.5.7 and newer are affected: The problem was
introduded resp. fixed by the commits
55c46b7 ([BUILTIN] Honor tab as IFS whitespace when
splitting fields in readcmd, 2009-08-11)
1d806ac ([VAR] Do not poplocalvars prematurely on regular
utilities, 2010-05-27)
in http://git.kernel.org/?p=utils/dash/dash.git
Putting 'IFS==' before that line makes all versions of dash
work.
This looks like a dash bug, not a misinterpretation of the
standard. However, it's worth working around for two
reasons. One, this version of dash was released in Fedora
14-16, so the bug is found in the wild. And two, at least
one other shell, Solaris /bin/sh, choked on this by
persisting IFS after the read invocation. That is not a
shell we usually care about, and I think this use of IFS is
acceptable by POSIX (which allows other behavior near
"special builtins", but "read" is not one of those). But it
seems that this may be a subtle, not-well-tested case for
some shells. Given that the workaround is so simple, it's
worth just being defensive.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare expected output inside test_expect_success that uses it.
Also remove excess blank lines.
Signed-off-by: Tom Grennan <tmgrennan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the style to more modern test scripts, namely:
- Prefer tabs for indentation.
- The first line of each test has prereq, title and opening sq for the
script body.
- Move cleanup or initialization of data used by a test inside the test
itself.
- Put a newline before the closing sq for each test.
- Don't conclude the test descriptions with a full stop.
- Prefer 'test_line_count = COUNT FILE' over 'test $(wc -l <FILE) = COUNT'
- Prefer 'test_line_count = 0 FILE' over 'cmp -s /dev/null FILE'
- Use '<<-EOF' style for here documents, so that they can be indented
as well. Bot don't do that in case the resulting lines would be too
long. Also when there is no $variable_substitution in the body of a
here document, quote \EOF.
- Don't redirect the output of commands to /dev/null unconditionally,
the git testing framework should already take care of handling test
verbosity transparently and uniformly.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any test script is run directly with Solaris 10 /usr/xpg4/bin/sh or
/bin/ksh, it fails spuriously with a message like:
t0000-basic.sh[31]: unset: bad argument count
This happens because those shells bail out when encountering a call to
"unset" with no arguments, and such unset call could take place in
'test-lib.sh'. Fix that issue, and add a proper comment to ensure we
don't regress in this respect.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'name' field passed to add_pending_object() is used to later
deduplicate in object_array_remove_duplicates().
git-bundle had a bug in this area since 18449ab (git-bundle: avoid
packing objects which are in the prerequisites, 2007-03-08): it passed
the name of each boundary object in a static buffer. In other words,
all that object_array_remove_duplicates() saw was the name of the
*last* added boundary object.
The recent switch to a strbuf in bc2fed4 (bundle: use a strbuf to scan
the log for boundary commits, 2012-02-22) made this slightly worse: we
now free the buffer at the end, so it is not even guaranteed that it
still points into addressable memory by the time object_array_remove_
duplicates looks at it. On the plus side however, it was now
detectable by valgrind.
The fix is easy: pass a copy of the string to add_pending_object.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last test descended into a subdir without ever re-emerging, which
is not so nice to the next test writer.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not so much a conversion as a "strip everything up to and
including the first blank line", but it will come in handy again.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing "diff" commands look at the working tree files without
refreshing the index themselves for performance reasons (the calling
script is expected to do that upfront just once, before calling one or
more of them). In the early days of git, they showed the "diff --git"
header before they actually ask the xdiff machinery to produce patches,
and ended up showing only these headers if the real contents are the same
and the difference they noticed was only because the stat info cached in
the index did not match that of the working tree. It was too late for the
implementation to take the header that it already emitted back.
But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19)
introduced necessary logic to keep the meta-information headers in a
strbuf and delay their output until the xdiff machinery noticed actual
changes. This was primarily in order to generate patches that ignore
whitespaces. When operating under "-w" mode, we wouldn't know if the
header is needed until we actually look at the resulting patch, so it was
a sensible thing to do, but we did not realize that the same reasoning
applies to stat-dirty paths.
Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary
file, 2010-05-26) generalized this machinery and added must_show_header
toggle. This is turned on when the header must be shown even when there
is no patch to be produced, e.g. only the mode was changed, or the path
was renamed, without changing the contents. However, when it did so, it
still kept the special case for the "-w" mode, which meant that the
plumbing would keep showing these phantom changes.
This corrects this historical inconsistency by allowing the plumbing to
omit paths that are only stat-dirty from its output in the same way as it
handles whitespace only changes under "-w" option.
The change in the behaviour can be seen in the updated test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing that looks at the working tree, i.e. "diff-index" and
"diff-files", always emit the "diff --git a/path b/path" header lines
without anything else for paths that are only stat-dirty (i.e. different
only because the cached stat information in the index no longer matches
that of the working tree, but the real contents are the same), when
these commands are run with "-p" option to produce patches.
Illustrate this current behaviour. Also demonstrate that with the "-w"
option, we (correctly) hold off showing a "diff --git" header until actual
differences have been found. This also suppresses the header for merely
stat-dirty files, which is inconsistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the style to more modern test scripts, namely:
- The first line of each test has prereq, title and opening sq for the
script body. This makes the test shorter while reducing the need for
backslashes.
- Be prepared for the case in which the previous test may have failed.
If a test wants to start from not having "frotz" that the previous test
may have created, write "rm -f frotz", not "rm frotz".
- Prepare the expected output inside your own test.
- The order of comparison to check the result is "diff expected actual",
so that the output will show how the output from the git you just broke
is different from what is expected.
- Write no SP between redirection '>' (or '<' for that matter) and the
filename.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the introduction on the limit of the width of the
graph part, a new test with COLUMNS=40 is added to check that the
environment variable influences diff, show, log, but not format-patch.
A new test is added because limiting the graph part makes COLUMNS=200
stop influencing diff --stat behaviour, which isn't wide enough now.
The old test with COLUMNS=200 is retained to check for regressions.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make merge --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make log --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make show --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Default to the real terminal width for diff --stat output, instead
of the hard-coded 80 columns.
Some projects (especially in Java), have long filename paths, with
nested directories or long individual filenames. When files are
renamed, the filename part in stat output can be almost useless. If
the middle part between { and } is long (because the file was moved to
a completely different directory), then most of the path would be
truncated.
It makes sense to detect and use the full terminal width and display
full filenames if possible.
The are commands like diff, show, and log, which can adapt the output
to the terminal width. There are also commands like format-patch,
whose output should be independent of the terminal width. Since it is
safer to use the 80-column default, the real terminal width is only
used if requested by the calling code by setting diffopts.stat_width=-1.
Normally this value is 0, and can be set by the user only to a
non-negative value, so -1 is safe to use internally.
This patch only changes the diff builtin to use the full terminal width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for updates to the "diff --stat" that updates the logic
to split the allotted columns into the name part and the graph part to
make the output more readable, add a handful of tests to document the
corner case behaviour in which long filenames and big changes are shown.
When a pathname is so long that it cannot fit on the column, the current
code truncates it to make sure that the graph part has enough room to show
a meaningful graph. If the actual change is small (e.g. only one line
changed), this results in the final output that is shorter than the width
we aim for.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -S<string>" is a useful way to find the last commit in the
codebase that touched the <string>. As it was designed to be used by a
porcelain script to dig the history starting from a block of text that
appear in the starting commit, it never had to look for anything but an
exact match.
When used by an end user who wants to look for the last commit that
removed a string (e.g. name of a variable) that he vaguely remembers,
however, it is useful to support case insensitive match.
When given the "--regexp-ignore-case" (or "-i") option, which originally
was designed to affect case sensitivity of the search done in the commit
log part, e.g. "log --grep", the matches made with -S/-G pickaxe search is
done case insensitively now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using regexp search ('sr' parameter / $search_use_regexp variable
is true), check first that regexp is valid.
Without this patch we would get an error from Perl during search (if
searching is performed by gitweb), or highlighting matches substring
(if applicable), if user provided invalid regexp... which means broken
HTML, with error page (including HTTP headers) generated after gitweb
already produced some output.
Add test that illustrates such error: for example for regexp "*\.git"
we would get the following error:
Quantifier follows nothing in regex; marked by <-- HERE in m/* <-- HERE \.git/
at /var/www/cgi-bin/gitweb.cgi line 3084.
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the magic line, prove shows lots and lots of errors:
% prove ./t9804-git-p4-label.sh
./t9804-git-p4-label.sh .. syntax error at ./t9804-git-p4-label.sh line 3, near ". ."
...
When #!/bin/sh is added, tests are skipped (I have no p4d).
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, fba4f1 (grep -P: Fix matching ^ and $) fixed an ancient bug. Add
some tests to protect the change from future breakages; a slightly broken
version of this was a part of the originally submitted patch.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
print_ref_list looks up the merge_filter_ref and assumes that a valid
pointer is returned. When the object doesn't exist, it tries to
dereference a NULL pointer. This can be the case when git branch
--merged is given an argument that isn't a valid commit name.
Check whether the lookup returns a NULL pointer and die with an error
if it does. Add a test, while we're at it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
* fc/push-prune:
push: add '--prune' option
remote: refactor code into alloc_delete_ref()
remote: reorganize check_pattern_match()
remote: use a local variable in match_push_refs()
Conflicts:
builtin/push.c
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
