We don't need to put a "\n" in calls to warning(), since it adds one
itself (and the user sees an extra blank line). Drop it, and while we're
here, drop the full-stop from the message, which goes against our
guidelines.
This bug dates all the way back to 8434c2f1af (Build in clone,
2008-04-27), but presumably nobody noticed because it's hard to trigger:
you have to clone a repository whose HEAD is unborn, but which is not
otherwise empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generalize the newly added "unused.cocci" rule to find more than just
"struct strbuf", let's have it find the same unused patterns for
"struct string_list", as well as other code that uses
similar-looking *_{release,clear,free}() and {release,clear,free}_*()
functions.
We're intentionally loose in accepting e.g. a "strbuf_init(&sb)"
followed by a "string_list_clear(&sb, 0)". It's assumed that the
compiler will catch any such invalid code, i.e. that our
constructors/destructors don't take a "void *".
See [1] for example of code that would be covered by the
"get_worktrees()" part of this rule. We'd still need work that the
series is based on (we were passing "worktrees" to a function), but
could now do the change in [1] automatically.
1. https://lore.kernel.org/git/Yq6eJFUPPTv%2Fzc0o@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a coccinelle rule to remove "struct strbuf" initialization
followed by calling "strbuf_release()" function, without any uses of
the strbuf in the same function.
See the tests in contrib/coccinelle/tests/unused.{c,res} for what it's
intended to find and replace.
The inclusion of "contrib/scalar/scalar.c" is because "spatch" was
manually run on it (we don't usually run spatch on contrib).
Per the "buggy code" comment we also match a strbuf_init() before the
xmalloc(), but we're not seeking to be so strict as to make checks
that the compiler will catch for us redundant. Saying we'll match
either "init" or "xmalloc" lines makes the rule simpler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> directory which is not on-disk due
to its existence outside of sparse-checkout cone, "giv mv" command
errors out with "bad source".
Add a helper check_dir_in_index() function to see if a directory
name exists in the index. Also add a SKIP_WORKTREE_DIR bit to mark
such directories.
Change the checking logic, so that such <source> directory makes
"giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Derrick [1], move the in-line definition of
"enum update_mode" to the top of the file and make it use "flags"
mode (each state is a different bit in the word).
Change the flag assignments from '=' (single assignment) to '|='
(additive). Also change flag evaluation from '==' to '&', etc.
[1] https://lore.kernel.org/git/22aadea2-9330-aa9e-7b6a-834585189144@github.com/
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a sparse file into cone can result in unwarned
overwrite of existing entry. The expected behavior is that if the
<destination> exists in the entry, user should be prompted to supply
a [-f|--force] to carry out the operation, or the operation should
fail.
Add a check mechanism to do that.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> file which is not on-disk but exists in
index as a SKIP_WORKTREE enabled cache entry, "giv mv" command errors
out with "bad source".
Change the checking logic, so that such <source>
file makes "giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous if/else-if chain are highly nested and hard to develop/extend.
Refactor to decouple this if/else-if chain by using goto to jump ahead.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, "git mv" a sparse file from out-of-cone to
in-cone does not update the moved file's sparsity (remove its
SKIP_WORKTREE bit). And the corresponding cache entry is, unexpectedly,
not checked out in the working tree.
Update the behavior so that:
1. Moving from out-of-cone to in-cone removes the SKIP_WORKTREE bit from
corresponding cache entry.
2. The moved cache entry is checked out in the working tree to reflect
the updated sparsity.
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 44c175c7a4 (pull: error on no merge
candidates, 2015-06-18). As a result we can mark several tests as
passing with SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
Removing the "int ret = 0" assignment added here in a6d7eb2c7a (pull:
optionally rebase submodules (remote submodule changes only),
2017-06-23) is not a logic error, it could always have been left
uninitialized (as "int ret"), now that we'll use the "ret" from the
upper scope we can drop the assignment in the "opt_rebase" branch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak where "cat-file" will leak the "path" member. See
e5fba602e5 (textconv: support for cat_file, 2010-06-15) for the code
that introduced the offending get_oid_with_context() call (called
get_sha1_with_context() at the time).
As a result we can mark several tests as passing with SANITIZE=leak
using "TEST_PASSES_SANITIZE_LEAK=true".
As noted in dc944b65f1 (get_sha1_with_context: dynamically allocate
oc->path, 2017-05-19) callers must free the "path" member. That same
commit added the relevant free() to this function, but we weren't
catching cases where we'd return early.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in 41abfe15d9 (maintenance: add
pack-refs task, 2021-02-09), we need to call strvec_clear() on the
"struct strvec" that we initialized.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1c41d2805e (unpack_trees_options: free messages when done,
2018-05-21) we started calling clear_unpack_trees_porcelain() on this
codepath, but missed this error path.
We could call clear_unpack_trees_porcelain() just before we error()
and return when unmerged_cache() fails, but the more correct fix is to
not have the unmerged_cache() check happen in the middle of our
"topts" setup.
Before 23cbf11b5c (merge-recursive: porcelain messages for checkout,
2010-08-11) we would not malloc() to setup our "topts", which is when
this started to leak on the error path.
Before that this code wasn't conflating the setup of "topts" and the
unmerged_cache() call in any meaningful way. The initial version in
782c2d65c2 (Build in checkout, 2008-02-07) just does a "memset" of
it, and initializes a single struct member.
Then in 8ccba008ee (unpack-trees: allow Porcelain to give different
error messages, 2008-05-17) we added the initialization of the error
message, which as noted above finally started leaking in 23cbf11b5c.
Let's fix the memory leak, and avoid future issues by initializing the
"topts" with a helper function. There are no functional changes here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "merge-file", we need to loop over the "mmfs"
array and free() what we've got so far when we error out. As a result
we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the code in builtin/merge-file.c to:
* Use the initializer to zero out "mmfs", and use modern C syntax for
the rest.
* Refactor the the inner loop to use a variable and "if/else if"
pattern followed by "return". This will make a change to change it to
a "goto cleanup" pattern smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 440c705ea6 (cat-file: add
--batch-command mode, 2022-02-18). The free_cmds() function was only
called on "queued_nr" if we had a "flush" command. As the "without
flush for blob info" test added in the same commit shows we can't rely
on that, so let's call free_cmds() again at the end.
Since "nr" follows the usual pattern of being set to 0 if we've
free()'d the memory already it's OK to call it twice, even in cases
where we are doing a "flush".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call the release_revisions() function added in
1878b5edc0 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_revert(), as well as freeing
the xmalloc()'d "revs" member itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak added in 0ec4b1650c (clone: fix ref selection in
--single-branch --branch=xxx, 2012-06-22).
Whether we get our "remote_head" from copy_ref() directly, or with a
call to guess_remote_head() it'll be the result of a copy_ref() in
either case, as guess_remote_head() is a wrapper for copy_ref() (or it
returns NULL).
We can't mark any tests passing passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true" as a result of this change, but
e.g. "t/t1500-rev-parse.sh" now gets closer to passing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "git check-ref-format" that's been present in the
code in one form or another since 38eedc634b (git check-ref-format
--print, 2009-10-12), the code got substantially refactored in
cfbe22f03f (check-ref-format: handle subcommands in separate
functions, 2010-08-05).
As a result we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All invocations of do_get_submodule_displaypath() pass
get_super_prefix() as the super_prefix arg, which is exactly the same
as get_submodule_displaypath().
Replace all calls to do_get_submodule_displaypath() with
get_submodule_displaypath(), and since it has no more callers, remove
it.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike the other subcommands, "git submodule--helper update" uses the
"--recursive-prefix" flag instead of "--super-prefix". The two flags are
otherwise identical (they only serve to compute the 'display path' of a
submodule), except that there is a dedicated helper function to get the
value of "--super-prefix".
This inconsistency exists because "git submodule update" used to pass
"--recursive-prefix" between shell and C (introduced in [1]) before
"--super-prefix" was introduced (in [2]), and for simplicity, we kept
this name when "git submodule--helper update" was created.
Remove "--recursive-prefix" and its associated code from "git
submodule--helper update", replacing it with "--super-prefix".
To use "--super-prefix", module_update is marked with
SUPPORT_SUPER_PREFIX. Note that module_clone must also be marked with
SUPPORT_SUPER_PREFIX, otherwise the "git submodule--helper clone"
subprocess will fail check because "--super-prefix" is propagated via
the environment.
[1] 48308681b0 (git submodule update: have a dedicated helper for
cloning, 2016-02-29)
[2] 74866d7579 (git: make super-prefix option, 2016-10-07)
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the SUPPORT_SUPER_PREFIX flag from "add", "init" and
"summary". For the "add" command it hasn't been used since [1],
likewise for "init" and "summary" since [2] and [3], respectively.
As implemented in 74866d7579 (git: make super-prefix option,
2016-10-07) the SUPPORT_SUPER_PREFIX flag in git.c applies for the
entire command, but as implemented in 89c8626557 (submodule helper:
support super prefix, 2016-12-08) we assert here in
cmd_submodule__helper() that we're not getting the flag unexpectedly.
1. 8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10)
2. 6e7c14e65c (submodule update --init: display correct path from
submodule, 2017-01-06)
3. 1cf823d8f0 (submodule: remove unnecessary `prefix` based option
logic, 2021-06-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a chunk of code in update_submodule() with an equivalent
do_get_submodule_displaypath() invocation. This is already tested by
t/t7406-submodule-update.sh:'submodule update --init --recursive from
subdirectory', so no tests are added.
The two are equivalent because:
- Exactly one of recursive_prefix|prefix is non-NULL at a time; prefix
is set at the superproject level, and recursive_prefix is set when
recursing into submodules. There is also a BUG() statement in
get_submodule_displaypath() that asserts that both cannot be non-NULL.
- In get_submodule_displaypath(), get_super_prefix() always returns NULL
because "--super-prefix" is never passed. Thus calling it is
equivalent to calling do_get_submodule_displaypath() with super_prefix
= NULL.
Therefore:
- When recursive_prefix is non-NULL, prefix is NULL, and thus
get_submodule_displaypath() just returns prefixed_path. This is
identical to calling do_get_submodule_displaypath() with super_prefix
= recursive_prefix because the return value is still the concatenation
of recursive_prefix + update_data->sm_path.
- When prefix is non-NULL, prefixed_path = update_data->sm_path. Thus
calling get_submodule_displaypath() with prefixed_path is equivalent
to calling do_get_submodule_displaypath() with update_data->sm_path
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_submodule() uses duplicated code to compute
update_data->displaypath and next.recursive_prefix. The latter is just
the former with "/" appended to it, and since update_data->displaypath
not changed outside of this statement, we can just reuse the already
computed result.
We can go one step further and remove the reference to
next.recursive_prefix altogether. Since it is only used in
update_data_to_args() (to compute the "--recursive-prefix" flag for the
recursive update child process) we can just use the already computed
.displaypath value of there.
Delete the duplicated code, and remove the unnecessary reference to
next.recursive_prefix. As a bonus, this fixes a memory leak where
prefixed_path was never freed (this leak was first reported in [1]).
[1] https://lore.kernel.org/git/877a45867ae368bf9e053caedcb6cf421e02344d.1655336146.git.gitgitgadget@gmail.com
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path, but should just use
do_get_submodule_displaypath() for consistency.
Do this replacement and reorder the code slightly to avoid computing
the display path twice.
Until the preceding commit this code had never been tested, with our
newly added tests we can see that both these sites have been computing
the display path incorrectly ever since they were introduced in
48308681b0 (git submodule update: have a dedicated helper for cloning,
2016-02-29) [1]:
- The first hunk puts a "/" between recursive_prefix and ce->name, but
recursive_prefix already ends with "/".
- The second hunk calls relative_path() on recursive_prefix and
ce->name, but relative_path() only makes sense when both paths share
the same base directory. This is never the case here:
- recursive_prefix is the path from the topmost superproject to the
current submodule
- ce->name is the path from the root of the current submodule to its
submodule.
so, e.g. recursive_prefix="super" and ce->name="submodule" produces
displayname="../super" instead of "super/submodule".
[1] I verified this by applying the tests to 48308681b0.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up on the preceding commit which taught "git submodule--helper
update" to understand "--merge", "--checkout" and "--rebase" and use
those options instead of "--update=(rebase|merge|checkout|none)" when
the command invokes itself.
Unlike the preceding change this isn't strictly necessary to
eventually change "git-submodule.sh" so that it invokes "git
submodule--helper update" directly, but let's remove this
inconsistency in the command-line interface. We shouldn't need to
carry special synonyms for existing options in "git submodule--helper"
when that command can use the primary documented names instead.
But, as seen in the post-image this makes the control flow within
"builtin/submodule--helper.c" simpler, we can now write directly to
the "update_default" member of "struct update_data" when parsing the
options in "module_update()".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Understand --checkout, --merge and --rebase synonyms for
--update={checkout,merge,rebase}, as well as the short options that
'git submodule' itself understands.
This removes a difference between the CLI API of "git submodule" and
"git submodule--helper", making it easier to make the latter an alias
for the former. See 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29) for the initial addition of
--update.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user-facing "git submodule--helper" commands so that
they'll report their name as being "git submodule". To a user these
commands are internal implementation details, and it doesn't make
sense to emit usage about an internal helper when "git submodule" is
invoked with invalid options.
Before this we'd emit e.g.:
$ git submodule absorbgitdirs --blah
error: unknown option `blah'
usage: git submodule--helper absorbgitdirs [<options>] [<path>...]
[...]
And:
$ git submodule set-url -- --
usage: git submodule--helper set-url [--quiet] <path> <newurl>
[...]
Now we'll start with "usage: git submodule [...]" in both of those
cases. This change does not alter the "list", "name", "clone",
"config" and "create-branch" commands, those are internal-only (as an
aside; their usage info should probably invoke BUG(...)). This only
changes the user-facing commands.
The "status", "deinit" and "update" commands are not included in this
change, because their usage information already used "submodule"
rather than "submodule--helper".
I don't think it's currently possible to emit some of this usage
information in practice, as git-submodule.sh will catch unknown
options, and e.g. it doesn't seem to be possible to get "add" to emit
its usage information from "submodule--helper".
Though that change may be superfluous now, it's also harmless, and
will allow us to eventually dispatch further into "git
submodule--helper" from git-submodule.sh, while emitting the correct
usage output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "absorb-git-dirs" subcommand to "absorbgitdirs", which is
what the "git submodule" command itself has called it since the
subcommand was implemented in f6f8586140 (submodule: add
absorb-git-dir function, 2016-12-12).
Having these two be different will make it more tedious to dispatch to
eventually dispatch "git submodule--helper" directly, as we'd need to
retain this name mapping. So let's get rid of this needless
inconsistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust code added in 0060fd1511 (clone --recurse-submodules: prevent
name squatting on Windows, 2019-09-12) to have the internal
--require-init option imply --init, rather than having
"git-submodule.sh" add it implicitly.
This change doesn't make any difference now, but eliminates another
special-case where "git submodule--helper update"'s behavior was
different from "git submodule update". This will make it easier to
eventually replace the cmd_update() function in git-submodule.sh.
We'll still need to keep the distinction between "--init" and
"--require-init" in git-submodule.sh. Once cmd_update() gets
re-implemented in C we'll be able to change variables and other code
related to that, but not yet.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Folks may want to merge histories that have no common ancestry; provide
a flag with the same name as used by `git merge` to allow this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much as `git ls-files` has a -z option, let's add one to merge-tree so
that the conflict-info section can be NUL terminated (and avoid quoting
of unusual filenames).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new `detailed` parameter, a new mode can be triggered when
displaying the merge messages: The `detailed` mode prints NUL-delimited
fields of the following form:
<path-count> NUL <path>... NUL <conflict-type> NUL <message>
The `<path-count>` field determines how many `<path>` fields there are.
The intention of this mode is to support server-side operations, where
worktree-less merges can lead to conflicts and depending on the type
and/or path count, the caller might know how to handle said conflict.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like `git merge` updates the index with information of the form
(mode, oid, stage, name)
provide this output for conflicted files for merge-tree as well.
Provide a --name-only option for users to exclude the mode, oid, and
stage and only get the list of conflicted filenames.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of `git merge-tree --write-tree` will often want to know which
files had conflicts. While they could potentially attempt to parse the
CONFLICT notices printed, those messages are not meant to be machine
readable. Provide a simpler mechanism of just printing the files (in
the same format as `git ls-files` with quoting, but restricted to
unmerged files) in the output before the free-form messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git merge-tree --write-tree`, we previously would only
return an exit status reflecting the cleanness of a merge, and print out
the toplevel tree of the resulting merge. Merges also have
informational messages, such as:
* "Auto-merging <PATH>"
* "CONFLICT (content): ..."
* "CONFLICT (file/directory)"
* etc.
In fact, when non-content conflicts occur (such as file/directory,
modify/delete, add/add with differing modes, rename/rename (1to2),
etc.), these informational messages may be the only notification the
user gets since these conflicts are not representable in the contents
of the file.
Add a --[no-]messages option so that callers can request these messages
be included at the end of the output. Include such messages by default
when there are conflicts, and omit them by default when the merge is
clean.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the ability to perform real merges rather than just trivial
merges (meaning handling three way content merges, recursive ancestor
consolidation, renames, proper directory/file conflict handling, and so
forth). However, unlike `git merge`, the working tree and index are
left alone and no branch is updated.
The only output is:
- the toplevel resulting tree printed on stdout
- exit status of 0 (clean), 1 (conflicts present), anything else
(merge could not be performed; unknown if clean or conflicted)
This output is meant to be used by some higher level script, perhaps in
a sequence of steps like this:
NEWTREE=$(git merge-tree --write-tree $BRANCH1 $BRANCH2)
test $? -eq 0 || die "There were conflicts..."
NEWCOMMIT=$(git commit-tree $NEWTREE -p $BRANCH1 -p $BRANCH2)
git update-ref $BRANCH1 $NEWCOMMIT
Note that higher level scripts may also want to access the
conflict/warning messages normally output during a merge, or have quick
access to a list of files with conflicts. That is not available in this
preliminary implementation, but subsequent commits will add that
ability (meaning that NEWTREE would be a lot more than a tree in the
case of conflicts).
This also marks the traditional trivial merge of merge-tree as
deprecated. The trivial merge not only had limited applicability, the
output format was also difficult to work with (and its format
undocumented), and will generally be less performant than real merges.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let merge-tree accept a `--write-tree` parameter for choosing real
merges instead of trivial merges, and accept an optional
`--trivial-merge` option to get the traditional behavior. Note that
these accept different numbers of arguments, though, so these names
need not actually be used.
Note that real merges differ from trivial merges in that they handle:
- three way content merges
- recursive ancestor consolidation
- renames
- proper directory/file conflict handling
- etc.
Basically all the stuff you'd expect from `git merge`, just without
updating the index and working tree. The initial shell added here does
nothing more than die with "real merges are not yet implemented", but
that will be fixed in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding a non-trivial merge capability to merge-tree,
move the existing merge logic for trivial merges into a new function.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive.h defined its own merge_trees() function, different than
the one found in builtin/merge-tree.c. That was okay in the past, but
we want merge-tree to be able to use the merge-ort functions, which will
end up including merge-recursive.h. Rename the function found in
builtin/merge-tree.c to avoid the conflict.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a command line option analogous to that of GNU
grep(1)'s -m / --max-count, which users might already be used to.
This makes it possible to limit the amount of matches shown in the
output while keeping the functionality of other options such as -C
(show code context) or -p (show containing function), which would be
difficult to do with a shell pipeline (e.g. head(1)).
Signed-off-by: Carlos López 00xc@protonmail.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 31c8221a (mktree: validate entry type in input, 2009-05-14), we
called the sha1_object_info() API to obtain the type information, but
allowed the call to silently fail when the object was missing locally,
so that we can sanity-check the types opportunistically when the
object did exist.
The implementation is understandable because back then there was no
lazy/on-demand downloading of individual objects from the promisor
remotes that causes a long delay and materializes the object, hence
defeating the point of using "--missing". The design is hurting us
now.
We could bypass the opportunistic type/mode consistency check
altogether when "--missing" is given, but instead, use the
oid_object_info_extended() API and tell it that we are only interested
in objects that locally exist and are immediately available by passing
OBJECT_INFO_SKIP_FETCH_OBJECT bit to it. That way, we will still
retain the cheap and opportunistic sanity check for local objects.
Signed-off-by: Richard Oliver <roliver@roku.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After b489b9d9aa (branch: use branch_checked_out() when deleting refs,
2022-06-14), we no longer look at our local "worktrees" variable, since
branch_checked_out() handles it under the hood. The compiler didn't
notice the unused variable because we call functions to initialize and
free it (so it's not totally unused, it just doesn't do anything
useful).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 12d47e3b1f (fetch: use new branch_checked_out() and add tests,
2022-06-14), fetch's update_local_ref() function stopped using its
"worktrees" parameter. It doesn't need it, since the
branch_checked_out() function examines the global worktrees under the
hood.
So we can not only drop the unused parameter from that function, but
also from its entire call chain. And as we do so all the way up to
do_fetch(), we can see that nobody uses it at all, and we can drop the
local variable there entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an option rather than command. Make the message convey this
similar to the other messages in the file.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Lowercase in manpage should use camelCase:
* Documentation/config/http.txt: http.pinnedpubkey
Lowercase in translable strings should use camelCase:
* builtin/fast-import.c: pack.indexversion
* builtin/gc.c: gc.logexpiry
* builtin/index-pack.c: pack.indexversion
* builtin/pack-objects.c: pack.indexversion
* builtin/repack.c: pack.writebitmaps
* commit.c: i18n.commitencoding
* gpg-interface.c: user.signingkey
* http.c: http.postbuffer
* submodule-config.c: submodule.fetchjobs
Mismatched camelCases, choose the former:
* Documentation/config/transfer.txt: transfer.credentialsInUrl
remote.c: transfer.credentialsInURL
[^1]: https://github.com/git-l10n/git-po-helper
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, the git remote show command will query data from remotes to
show data about what might be done on a future git fetch. This process
currently does not handle negative refspecs. This can be confusing,
because the show command will list refs as if they would be fetched. For
example if the fetch refspec "^refs/heads/pr/*", it still displays the
following:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 new (next fetch will store in remotes/jdk19)
pr/2 new (next fetch will store in remotes/jdk19)
pr/3 new (next fetch will store in remotes/jdk19)
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
Fix this by adding an additional check inside of get_ref_states. If a
ref matches one of the negative refspecs, mark it as skipped instead of
marking it as new or tracked.
With this change, we now report remote branches that are skipped due to
negative refspecs properly:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 skipped
pr/2 skipped
pr/3 skipped
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
By showing the refs as skipped, it helps clarify that these references
won't actually be fetched.
This does not properly handle refs going stale due to a newly added
negative refspec. In addition, git remote prune doesn't handle that
negative refspec case either. Fixing that requires digging into
get_stale_heads and handling the case of a ref which exists on the
remote but is omitted due to a negative refspec locally.
Add a new test case which covers the functionality above, as well as a
new expected failure indicating the poor overlap with stale refs.
Reported-by: Pavel Rappo <pavel.rappo@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c51f8f94e5 (submodule--helper: run update procedures from C,
2021-08-24), we added code that first obtains the default remote, and
then adds that to a `strvec`.
However, we never released the default remote's memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various error messages that talk about the removal of
"--preserve-merges" in "rebase" have been strengthened, and "rebase
--abort" learned to get out of a state that was left by an earlier
use of the option.
* po/rebase-preserve-merges:
rebase: translate a die(preserve-merges) message
rebase: note `preserve` merges may be a pull config option
rebase: help users when dying with `preserve-merges`
rebase.c: state preserve-merges has been removed
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
This was found during l10n process by Jiang Xin.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the last current use of find_shared_symref() that can easily be
replaced by branch_checked_out(). The benefit of this switch is that the
code is a bit simpler, but also it is faster on repeated calls.
The remaining uses of find_shared_symref() are non-trivial to remove, so
we probably should not continue in that direction:
* builtin/notes.c uses find_shared_symref() with "NOTES_MERGE_REF"
instead of "HEAD", so it doesn't have an immediate analogue with
branch_checked_out(). Perhaps we should consider extending it to
include that symref in addition to HEAD, BISECT_HEAD, and
REBASE_HEAD.
* receive-pack.c checks to see if a worktree has a checkout for the ref
that is being updated. The tricky part is that it can actually decide
to update the worktree directly instead of just skipping the update.
This all depends on the receive.denyCurrentBranch config option. The
implementation currenty cares about receiving the worktree in the
result, so the current branch_checked_out() prototype is insufficient
currently. This is something to investigate later, though, since a
large number of refs could be updated at the same time and using the
strmap implementation of branch_checked_out() could be beneficial.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching refs from a remote, it is possible that the refspec will
cause use to overwrite a ref that is checked out in a worktree. The
existing logic in builtin/fetch.c uses a possibly-slow mechanism. Update
those sections to use the new, more efficient branch_checked_out()
helper.
These uses were not previously tested, so add a test case that can be
used for these kinds of collisions. There is only one test now, but more
tests will be added as other consumers of branch_checked_out() are
added.
Note that there are two uses in builtin/fetch.c, but only one of the
messages is tested. This is because the tested check is run before
completing the fetch, and the untested check is not reachable without
concurrent updates to the filesystem. Thus, it is beneficial to keep
that extra check for the sake of defense-in-depth. However, we should
not attempt to test the check, as the effort required is too
complicated to be worth the effort. This use in update_local_ref()
also requires a change in the error message because we no longer have
access to the worktree struct, only the path of the worktree. This error
is so rare that making a distinction between the two is not critical.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-ref --heads" (and "--tags") still iterated over all the
refs only to discard refs outside the specified area, which has
been corrected.
* tb/show-ref-optim:
builtin/show-ref.c: avoid over-iterating with --heads, --tags
Make use of the stream_loose_object() function introduced in the
preceding commit to unpack large objects. Before this we'd need to
malloc() the size of the blob before unpacking it, which could cause
OOM with very large blobs.
We could use the new streaming interface to unpack all blobs, but
doing so would be much slower, as demonstrated e.g. with this
benchmark using git-hyperfine[0]:
rm -rf /tmp/scalar.git &&
git clone --bare https://github.com/Microsoft/scalar.git /tmp/scalar.git &&
mv /tmp/scalar.git/objects/pack/*.pack /tmp/scalar.git/my.pack &&
git hyperfine \
-r 2 --warmup 1 \
-L rev origin/master,HEAD -L v "10,512,1k,1m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/scalar.git/my.pack'
Here we'll perform worse with lower core.bigFileThreshold settings
with this change in terms of speed, but we're getting lower memory use
in return:
Summary
'./git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master' ran
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.02 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.02 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.09 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.10 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.11 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
A better benchmark to demonstrate the benefits of that this one, which
creates an artificial repo with a 1, 25, 50, 75 and 100MB blob:
rm -rf /tmp/repo &&
git init /tmp/repo &&
(
cd /tmp/repo &&
for i in 1 25 50 75 100
do
dd if=/dev/urandom of=blob.$i count=$(($i*1024)) bs=1024
done &&
git add blob.* &&
git commit -mblobs &&
git gc &&
PACK=$(echo .git/objects/pack/pack-*.pack) &&
cp "$PACK" my.pack
) &&
git hyperfine \
--show-output \
-L rev origin/master,HEAD -L v "512,50m,100m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum'
Using this test we'll always use >100MB of memory on
origin/master (around ~105MB), but max out at e.g. ~55MB if we set
core.bigFileThreshold=50m.
The relevant "Maximum resident set size" lines were manually added
below the relevant benchmark:
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master' ran
Maximum resident set size (kbytes): 107080
1.02 ± 0.78 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 106968
1.09 ± 0.79 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 107032
1.42 ± 1.07 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 107072
1.83 ± 1.02 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 55704
2.16 ± 1.19 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 4564
This shows that if you have enough memory this new streaming method is
slower the lower you set the streaming threshold, but the benefit is
more bounded memory use.
An earlier version of this patch introduced a new
"core.bigFileStreamingThreshold" instead of re-using the existing
"core.bigFileThreshold" variable[1]. As noted in a detailed overview
of its users in [2] using it has several different meanings.
Still, we consider it good enough to simply re-use it. While it's
possible that someone might want to e.g. consider objects "small" for
the purposes of diffing but "big" for the purposes of writing them
such use-cases are probably too obscure to worry about. We can always
split up "core.bigFileThreshold" in the future if there's a need for
that.
0. https://github.com/avar/git-hyperfine/
1. https://lore.kernel.org/git/20211210103435.83656-1-chiyutianyi@gmail.com/
2. https://lore.kernel.org/git/20220120112114.47618-5-chiyutianyi@gmail.com/
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the name implies, "get_data(size)" will allocate and return a given
amount of memory. Allocating memory for a large blob object may cause the
system to run out of memory. Before preparing to replace calling of
"get_data()" to unpack large blob objects in latter commits, refactor
"get_data()" to reduce memory footprint for dry_run mode.
Because in dry_run mode, "get_data()" is only used to check the
integrity of data, and the returned buffer is not used at all, we can
allocate a smaller buffer and use it as zstream output. Make the function
return NULL in the dry-run mode, as no callers use the returned buffer.
The "find [...]objects/?? -type f | wc -l" test idiom being used here
is adapted from the same "find" use added to another test in
d9545c7f46 (fast-import: implement unpack limit, 2016-04-25).
Suggested-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
The resolve-undo extension was added to the index in cfc5789a
(resolve-undo: record resolved conflicts in a new index extension
section, 2009-12-25). This extension records the blob object names
and their modes of conflicted paths when the path gets resolved
(e.g. with "git add"), to allow "undoing" the resolution with
"checkout -m path". These blob objects should be guarded from
garbage-collection while we have the resolve-undo information in the
index (otherwise unresolve operation may try to use a blob object
that has already been pruned away).
But the code called from mark_reachable_objects() for the index
forgets to do so. Teach add_index_objects_to_pending() helper to
also add objects referred to by the resolve-undo extension.
Also make matching changes to "fsck", which has code that is fairly
similar to the reachability stuff, but have parallel implementations
for all these stuff, which may (or may not) someday want to be unified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --origin X" leaked piece of memory that held value read
from the clone.defaultRemoteName configuration variable, which has
been plugged.
source: <xmqqlevl4ysk.fsf@gitster.g>
* jc/clone-remote-name-leak-fix:
clone: plug a miniscule leak
The path taken by "git multi-pack-index" command from the end user
was compared with path internally prepared by the tool withut first
normalizing, which lead to duplicated paths not being noticed,
which has been corrected.
source: <pull.1221.v2.git.1650911234.gitgitgadget@gmail.com>
* ds/midx-normalize-pathname-before-comparison:
cache: use const char * for get_object_directory()
multi-pack-index: use --object-dir real path
midx: use real paths in lookup_multi_pack_index()
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
source: <20220421044233.894255-1-alexhenrie24@gmail.com>
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
source: <xmqqh76mf7s4.fsf_-_@gitster.g>
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
This is a user facing message for a situation seen in the wild.
Translate it.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--preserve-merges` option was removed by v2.34.0. However
users may not be aware that it is also a Pull configuration option,
which is still offered by major IDE vendors such as Visual Studio.
Extend the `--preserve-merges` die message to also direct users to
the possible use of the `preserve` option in the `pull.rebase` config.
This is an additional 'belt and braces' information statement.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git would die if a "rebase --preserve-merges" was in progress.
Users could neither --quit, --abort, nor --continue the rebase.
Make the `rebase --abort` option available to allow users to remove
traces of any preserve-merges rebase, even if they had upgraded
during a rebase.
One trigger case was an unexpectedly difficult to resolve conflict, as
reported on the `git-users` group.
(https://groups.google.com/g/git-for-windows/c/3jMWbBlXXHM)
Other potential use-cases include git-experts using the portable
'Git on a stick' to help users with an older git version.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since feebd2d256 (rebase: hide --preserve-merges option, 2019-10-18)
this option is now removed as stated in the subsequent release notes.
Fix and reflow the option tip.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `show-ref` is combined with the `--heads` or `--tags` options, it
can avoid iterating parts of a repository's references that it doesn't
care about.
But it doesn't take advantage of this potential optimization. When this
command was introduced back in 358ddb62cf (Add "git show-ref" builtin
command, 2006-09-15), `for_each_ref_in()` did exist. But since most
repositories don't have many (any?) references that aren't branches or
tags already, this makes little difference in practice.
Though for repositories with a large imbalance of branches and tags (or,
more likely in the case of server operators, many hidden references),
this can make quite a difference. Take, for example, a repository with
500,000 "hidden" references (all of the form "refs/__hidden__/N"), and
a single branch:
git commit --allow-empty -m "base" &&
seq 1 500000 | sed 's,\(.*\),create refs/__hidden__/\1 HEAD,' |
git update-ref --stdin &&
git pack-refs --all
Outputting the existence of that single branch currently takes on the
order of ~50ms on my machine. The vast majority of this time is wasted
iterating through references that we know we're going to discard.
Instead, teach `show-ref` that it can iterate just "refs/heads" and/or
"refs/tags" when given `--heads` and/or `--tags`, respectively. A few
small interesting things to note:
- When given either option, we can avoid the general-purpose
for_each_ref() call altogether, since we know that it won't give us
any references that we wouldn't filter out already.
- We can make two separate calls to `for_each_fullref_in()` (and
avoid, say, the more specialized `for_each_fullref_in_prefixes()`,
since we know that the set of references enumerated by each is
disjoint, so we'll never see the same reference appear in both
calls.
- We have to use the "fullref" variant (instead of just
`for_each_branch_ref()` and `for_each_tag_ref()`), since we expect
fully-qualified reference names to appear in `show-ref`'s output.
When either of `heads_only` or `tags_only` is set, we can eliminate the
strcmp() calls in `builtin/show-ref.c::show_ref()` altogether, since we
know that `show_ref()` will never see a non-branch or tag reference.
Unfortunately, we can't use `for_each_fullref_in_prefixes()` to enhance
`show-ref`'s pattern matching, since `show-ref` patterns match on the
_suffix_ (e.g., the pattern "foo" shows "refs/heads/foo",
"refs/tags/foo", and etc, not "foo/*").
Nonetheless, in our synthetic example above, this provides a significant
speed-up ("git" is roughly v2.36, "git.compile" is this patch):
$ hyperfine -N 'git show-ref --heads' 'git.compile show-ref --heads'
Benchmark 1: git show-ref --heads
Time (mean ± σ): 49.9 ms ± 6.2 ms [User: 45.6 ms, System: 4.1 ms]
Range (min … max): 46.1 ms … 73.6 ms 43 runs
Benchmark 2: git.compile show-ref --heads
Time (mean ± σ): 2.8 ms ± 0.4 ms [User: 1.4 ms, System: 1.2 ms]
Range (min … max): 1.3 ms … 5.6 ms 957 runs
Summary
'git.compile show-ref --heads' ran
18.03 ± 3.38 times faster than 'git show-ref --heads'
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to pack unreachable objects into a "cruft pack",
instead of ejecting them into loose form to be reclaimed later, has
been introduced.
* tb/cruft-packs:
sha1-file.c: don't freshen cruft packs
builtin/gc.c: conditionally avoid pruning objects via loose
builtin/repack.c: add cruft packs to MIDX during geometric repack
builtin/repack.c: use named flags for existing_packs
builtin/repack.c: allow configuring cruft pack generation
builtin/repack.c: support generating a cruft pack
builtin/pack-objects.c: --cruft with expiration
reachable: report precise timestamps from objects in cruft packs
reachable: add options to add_unseen_recent_objects_to_traversal
builtin/pack-objects.c: --cruft without expiration
builtin/pack-objects.c: return from create_object_entry()
t/helper: add 'pack-mtimes' test-tool
pack-mtimes: support writing pack .mtimes files
chunk-format.h: extract oid_version()
pack-write: pass 'struct packing_data' to 'stage_tmp_packfiles'
pack-mtimes: support reading .mtimes files
Documentation/technical: add cruft-packs.txt
A workflow change for translators are being proposed.
* jx/l10n-workflow-change:
l10n: Document the new l10n workflow
Makefile: add "po-init" rule to initialize po/XX.po
Makefile: add "po-update" rule to update po/XX.po
po/git.pot: don't check in result of "make pot"
po/git.pot: this is now a generated file
Makefile: remove duplicate and unwanted files in FOUND_SOURCE_FILES
i18n CI: stop allowing non-ASCII source messages in po/git.pot
Makefile: have "make pot" not "reset --hard"
Makefile: generate "po/git.pot" from stable LOCALIZED_C
Makefile: sort source files before feeding to xgettext
Teach "git repack --geometric" work better with "--keep-pack" and
avoid corrupting the repository when packsize limit is used.
* tb/geom-repack-with-keep-and-max:
builtin/repack.c: ensure that `names` is sorted
t7703: demonstrate object corruption with pack.packSizeLimit
repack: respect --keep-pack with geometric repack
"sparse-checkout" learns to work well with the sparse-index
feature.
* ds/sparse-sparse-checkout:
sparse-checkout: integrate with sparse index
p2000: add test for 'git sparse-checkout [add|set]'
sparse-index: complete partial expansion
sparse-index: partially expand directories
sparse-checkout: --no-sparse-index needs a full index
cache-tree: implement cache_tree_find_path()
sparse-index: introduce partially-sparse indexes
sparse-index: create expand_index()
t1092: stress test 'git sparse-checkout set'
t1092: refactor 'sparse-index contents' test
The multi-pack-index code did not protect the packfile it is going
to depend on from getting removed while in use, which has been
corrected.
* tb/midx-race-in-pack-objects:
builtin/pack-objects.c: ensure pack validity from MIDX bitmap objects
builtin/pack-objects.c: ensure included `--stdin-packs` exist
builtin/pack-objects.c: avoid redundant NULL check
pack-bitmap.c: check preferred pack validity when opening MIDX bitmap
Preliminary code refactoring around transport and bundle code.
* ds/bundle-uri:
bundle.h: make "fd" version of read_bundle_header() public
remote: allow relative_url() to return an absolute url
remote: move relative_url()
http: make http_get_file() external
fetch-pack: move --keep=* option filling to a function
fetch-pack: add a deref_without_lazy_fetch_extended()
dir API: add a generalized path_match_flags() function
connect.c: refactor sending of agent & object-format
Introduce a filesystem-dependent mechanism to optimize the way the
bits for many loose object files are ensured to hit the disk
platter.
* ns/batch-fsync:
core.fsyncmethod: performance tests for batch mode
t/perf: add iteration setup mechanism to perf-lib
core.fsyncmethod: tests for batch mode
test-lib-functions: add parsing helpers for ls-files and ls-tree
core.fsync: use batch mode and sync loose objects by default on Windows
unpack-objects: use the bulk-checkin infrastructure
update-index: use the bulk-checkin infrastructure
builtin/add: add ODB transaction around add_files_to_cache
cache-tree: use ODB transaction around writing a tree
core.fsyncmethod: batched disk flushes for loose-objects
bulk-checkin: rebrand plug/unplug APIs as 'odb transactions'
bulk-checkin: rename 'state' variable and separate 'plugged' boolean
Deprecate non-cone mode of the sparse-checkout feature.
* en/sparse-cone-becomes-default:
Documentation: some sparsity wording clarifications
git-sparse-checkout.txt: mark non-cone mode as deprecated
git-sparse-checkout.txt: flesh out pattern set sections a bit
git-sparse-checkout.txt: add a new EXAMPLES section
git-sparse-checkout.txt: shuffle some sections and mark as internal
git-sparse-checkout.txt: update docs for deprecation of 'init'
git-sparse-checkout.txt: wording updates for the cone mode default
sparse-checkout: make --cone the default
tests: stop assuming --no-cone is the default mode for sparse-checkout
Follow-up on a preceding commit which changed all references to the
"env_array" when referring to the "struct child_process" member. These
changes are all unnecessary for the compiler, but help the code's
human readers.
All the comments that referred to "env_array" have now been updated,
as well as function names and variables that had "env_array" in their
name, they now refer to "env".
In addition the "out" name for the submodule.h prototype was
inconsistent with the function definition's use of "env_array" in
submodule.c. Both of them use "env" now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend code added in a6a8431968 (receive-pack.c: shorten the
execute_commands loop over all commands, 2015-01-07) and amended to
hard die in b6a4788586 (receive-pack.c: die instead of error in case
of possible future bug, 2015-01-07) to use the new bug() function
instead.
Let's also rename the warn_if_*() function that code is in to
BUG_if_*(), its name became outdated in b6a4788586.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 'revert' and 'cherry-pick' share a lot of code, it is easy to
modify the behaviour of one command and inadvertently affect the
other. An earlier change to teach the '--reference' option and the
'revert.reference' configuration variable to the former was not
careful enough and 'cherry-pick --reference' wasn't rejected as an
error.
It is possible to think 'cherry-pick -x' might benefit from the
'--reference' option, but it is fundamentally different from
'revert' in at least two ways to make it questionable:
- 'revert' names a commit that is ancestor of the resulting commit,
so an abbreviated object name with human readable title is
sufficient to identify the named commit uniquely without using
the full object name. On the other hand, 'cherry-pick'
usually [*] picks a commit that is not an ancestor. It might be
even picking a private commit that never becomes part of the
public history.
- The whole commit message of 'cherry-pick' is a copy of the
original commit, and there is nothing gained to repeat only the
title part on 'cherry-picked from' message.
[*] well, you could revert and then you can pick the original that
was reverted to get back to where you were, but then you can
revert the revert to do the same thing.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -i" was rewritten in C some time ago and has been in
testing; the reimplementation is now exposed to general public by
default.
* js/use-builtin-add-i:
add -i: default to the built-in implementation
t2016: require the PERL prereq only when necessary
A typical "git revert" commit uses the full title of the original
commit in its title, and starts its body of the message with:
This reverts commit 8fa7f667cf61386257c00d6e954855cc3215ae91.
This does not encourage the best practice of describing not just
"what" (i.e. "Revert X" on the title says what we did) but "why"
(i.e. and it does not say why X was undesirable).
We can instead phrase this first line of the body to be more like
This reverts commit 8fa7f667 (do this and that, 2022-04-25)
so that the title does not have to be
Revert "do this and that"
We can instead use the title to describe "why" we are reverting the
original commit.
Introduce the "--reference" option to "git revert", and also the
revert.reference configuration variable, which defaults to false, to
tweak the title and the first line of the draft commit message for
when creating a "revert" commit.
When this option is in use, the first line of the pre-filled editor
buffer becomes a comment line that tells the user to say _why_. If
the user exits the editor without touching this line by mistake,
what we prepare to become the first line of the body, i.e. "This
reverts commit 8fa7f667 (do this and that, 2022-04-25)", ends up to
be the title of the resulting commit. This behaviour is designed to
help such a user to identify such a revert in "git log --oneline"
easily so that it can be further reworded with "git rebase -i" later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create another thread to watch over the daemon process and
automatically shut it down if necessary.
This commit creates the basic framework for a "health" thread
to monitor the daemon and/or the file system. Later commits
will add platform-specific code to do the actual work.
The "health" thread is intended to monitor conditions that
would be difficult to track inside the IPC thread pool and/or
the file system listener threads. For example, when there are
file system events outside of the watched worktree root or if
we want to have an idle-timeout auto-shutdown feature.
This commit creates the health thread itself, defines the thread-proc
and sets up the thread's event loop. It integrates this new thread
into the existing IPC and Listener thread models.
This commit defines the API to the platform-specific code where all of
the monitoring will actually happen.
The platform-specific code for MacOS is just stubs. Meaning that the
health thread will immediately exit on MacOS, but that is OK and
expected. Future work can define MacOS-specific monitoring.
The platform-specific code for Windows sets up enough of the
WaitForMultipleObjects() machinery to watch for system and/or custom
events. Currently, the set of wait handles only includes our custom
shutdown event (sent from our other theads). Later commits in this
series will extend the set of wait handles to monitor other
conditions.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename platform-specific listener thread related variables
and data types as we prepare to add another backend thread
type.
[] `struct fsmonitor_daemon_backend_data` becomes `struct fsm_listen_data`
[] `state->backend_data` becomes `state->listen_data`
[] `state->error_code` becomes `state->listen_error_code`
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor daemon thread startup to make it easier to start
a third thread class to monitor the health of the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the fsmonitor--daemon to CD outside of the worktree
before starting up.
The common Git startup mechanism causes the CWD of the daemon process
to be in the root of the worktree. On Windows, this causes the daemon
process to hold a locked handle on the CWD and prevents other
processes from moving or deleting the worktree while the daemon is
running.
CD to HOME before entering main event loops.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bare repos do not have a worktree, so there is nothing for the
daemon watch.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the new `git repack --cruft` mode from `git gc` via a new opt-in
flag. When invoked like `git gc --cruft`, `git gc` will avoid exploding
unreachable objects as loose ones, and instead create a cruft pack and
`.mtimes` file.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using cruft packs, the following race can occur when a geometric
repack that writes a MIDX bitmap takes place afterwords:
- First, create an unreachable object and do an all-into-one cruft
repack which stores that object in the repository's cruft pack.
- Then make that object reachable.
- Finally, do a geometric repack and write a MIDX bitmap.
Assuming that we are sufficiently unlucky as to select a commit from the
MIDX which reaches that object for bitmapping, then the `git
multi-pack-index` process will complain that that object is missing.
The reason is because we don't include cruft packs in the MIDX when
doing a geometric repack. Since the "make that object reachable" doesn't
necessarily mean that we'll create a new copy of that object in one of
the packs that will get rolled up as part of a geometric repack, it's
possible that the MIDX won't see any copies of that now-reachable
object.
Of course, it's desirable to avoid including cruft packs in the MIDX
because it causes the MIDX to store a bunch of objects which are likely
to get thrown away. But excluding that pack does open us up to the above
race.
This patch demonstrates the bug, and resolves it by including cruft
packs in the MIDX even when doing a geometric repack.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the `util` pointer for items in the `existing_packs` string list
to indicate which packs are going to be deleted. Since that has so far
been the only use of that `util` pointer, we just set it to 0 or 1.
But we're going to add an additional state to this field in the next
patch, so prepare for that by adding a #define for the first bit so we
can more expressively inspect the flags state.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In servers which set the pack.window configuration to a large value, we
can wind up spending quite a lot of time finding new bases when breaking
delta chains between reachable and unreachable objects while generating
a cruft pack.
Introduce a handful of `repack.cruft*` configuration variables to
control the parameters used by pack-objects when generating a cruft
pack.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose a way to split the contents of a repository into a main and cruft
pack when doing an all-into-one repack with `git repack --cruft -d`, and
a complementary configuration variable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a previous patch, pack-objects learned how to generate a cruft pack
so long as no objects are dropped.
This patch teaches pack-objects to handle the case where a non-never
`--cruft-expiration` value is passed. This case is slightly more
complicated than before, because we want pack-objects to save
unreachable objects which would have been pruned when there is another
recent (i.e., non-prunable) unreachable object which reaches the other.
We'll call these objects "unreachable but reachable-from-recent".
Here is how pack-objects handles `--cruft-expiration`:
- Instead of adding all objects outside of the kept pack(s) into the
packing list, only handle the ones whose mtime is within the grace
period.
- Construct a reachability traversal whose tips are the
unreachable-but-recent objects.
- Then, walk along that traversal, stopping if we reach an object in
the kept pack. At each step along the traversal, we add the object
we are visiting to the packing list.
In the majority of these cases, any object we visit in this traversal
will already be in our packing list. But we will sometimes encounter
reachable-from-recent cruft objects, which we want to retain even if
they aged out of the grace period.
The most subtle point of this process is that we actually don't need to
bother to update the rescued object's mtime. Even though we will write
an .mtimes file with a value that is older than the expiration window,
it will continue to survive cruft repacks so long as any objects which
reach it haven't aged out.
That is, a future repack will also exclude that object from the initial
packing list, only to discover it later on when doing the reachability
traversal.
Finally, stopping early once an object is found in a kept pack is safe
to do because the kept packs ordinarily represent which packs will
survive after repacking. Assuming that it _isn't_ safe to halt a
traversal early would mean that there is some ancestor object which is
missing, which implies repository corruption (i.e., the complete set of
reachable objects isn't present).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function behaves very similarly to what we will need in
pack-objects in order to implement cruft packs with expiration. But it
is lacking a couple of things. Namely, it needs:
- a mechanism to communicate the timestamps of individual recent
objects to some external caller
- and, in the case of packed objects, our future caller will also want
to know the originating pack, as well as the offset within that pack
at which the object can be found
- finally, it needs a way to skip over packs which are marked as kept
in-core.
To address the first two, add a callback interface in this patch which
reports the time of each recent object, as well as a (packed_git,
off_t) pair for packed objects.
Likewise, add a new option to the packed object iterators to skip over
packs which are marked as kept in core. This option will become
implicitly tested in a future patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `pack-objects` how to generate a cruft pack when no objects are
dropped (i.e., `--cruft-expiration=never`). Later patches will teach
`pack-objects` how to generate a cruft pack that prunes objects.
When generating a cruft pack which does not prune objects, we want to
collect all unreachable objects into a single pack (noting and updating
their mtimes as we accumulate them). Ordinary use will pass the result
of a `git repack -A` as a kept pack, so when this patch says "kept
pack", readers should think "reachable objects".
Generating a non-expiring cruft packs works as follows:
- Callers provide a list of every pack they know about, and indicate
which packs are about to be removed.
- All packs which are going to be removed (we'll call these the
redundant ones) are marked as kept in-core.
Any packs the caller did not mention (but are known to the
`pack-objects` process) are also marked as kept in-core. Packs not
mentioned by the caller are assumed to be unknown to them, i.e.,
they entered the repository after the caller decided which packs
should be kept and which should be discarded.
Since we do not want to include objects in these "unknown" packs
(because we don't know which of their objects are or aren't
reachable), these are also marked as kept in-core.
- Then, we enumerate all objects in the repository, and add them to
our packing list if they do not appear in an in-core kept pack.
This results in a new cruft pack which contains all known objects that
aren't included in the kept packs. When the kept pack is the result of
`git repack -A`, the resulting pack contains all unreachable objects.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
