The "diff" drivers specified by the "diff" attribute attached to
paths can now specify which algorithm (e.g. histogram) to use.
* jc/diff-algo-attribute:
diff: teach diff to read algorithm from diff driver
diff: consolidate diff algorithm option parsing
It can be useful to specify diff algorithms per file type. For example,
one may want to use the minimal diff algorithm for .json files, another
for .c files, etc.
The diff machinery already checks attributes for a diff driver. Teach
the diff driver parser a new type "algorithm" to look for in the
config, which will be used if a driver has been specified through the
attributes.
Enforce precedence of the diff algorithm by favoring the command line
option, then looking at the driver attributes & config combination, then
finally the diff.algorithm config.
To enforce precedence order, use a new `ignore_driver_algorithm` member
during options parsing to indicate the diff algorithm was set via command
line args.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will need the ability to tell if the diff algorithm
was set through the command line through setting a new member of
diff_options. While this logic can be added to the
diff_opt_diff_algorithm() callback, the `--minimal` and `--histogram`
options are handled via OPT_BIT without a callback.
Remedy this by consolidating the options parsing logic for --minimal and
--histogram into one callback. This way we can modify `diff_options` in
that function.
As an additional refactor, the logic that sets the diff algorithm in
diff_opt_diff_algorithm() can be refactored into a helper that will
allow multiple callsites to set the diff algorithm.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --relative" did not mix well with "git diff --ext-diff",
which has been corrected.
* jk/ext-diff-with-relative:
diff: drop "name" parameter from prepare_temp_file()
diff: clean up external-diff argv setup
diff: use filespec path to set up tempfiles for ext-diff
The prepare_temp_file() function takes a diff_filespec as well as a
filename. But it is almost certainly an error to pass in a name that
isn't the filespec's "path" parameter, since that is the only thing that
reliably tells us how to find the content (and indeed, this was the
source of a recently-fixed bug).
So let's drop the redundant "name" parameter and just use one->path
throughout the function. This simplifies the interface a little bit, and
makes it impossible for calling code to get it wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the previous commit, setting up the tempfile for an external diff
uses df->path from the diff_filespec, rather than the logical name. This
means add_external_diff_name() does not need to take a "name" parameter
at all, and we can drop it. And that in turn lets us simplify the
conditional for handling renames (when the "other" name is non-NULL).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're going to run an external diff, we have to make the contents
of the pre- and post-images available either by dumping them to a
tempfile, or by pointing at a valid file in the worktree. The logic of
this is all handled by prepare_temp_file(), and we just pass in the
filename and the diff_filespec.
But there's a gotcha here. The "filename" we have is a logical filename
and not necessarily a path on disk or in the repository. This matters in
at least one case: when using "--relative", we may have a name like
"foo", even though the file content is found at "subdir/foo". As a
result, we look for the wrong path, fail to find "foo", and claim that
the file has been deleted (passing "/dev/null" to the external diff,
rather than the correct worktree path).
We can fix this by passing the pathname from the diff_filespec, which
should always be a full repository path (and that's what we want even if
reusing a worktree file, since we're always operating from the top-level
of the working tree).
The breakage seems to go all the way back to cd676a5136 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12). As far as I can tell, before then "name" would always have
been the same as the filespec's "path".
There are two related cases I looked at that aren't buggy:
1. the only other caller of prepare_temp_file() is run_textconv(). But
it always passes the filespec's path field, so it's OK.
2. I wondered if file renames/copies might cause similar confusion.
But they don't, because run_external_diff() receives two names in
that case: "name" and "other", which correspond to the two sides of
the diff. And we did correctly pass "other" when handling the
post-image side. Barring the use of "--relative", that would always
match "two->path", the path of the second filespec (and the rename
destination).
So the only bug is just the interaction with external diff drivers and
--relative.
Reported-by: Carl Baldwin <carl@ecbaldwin.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output from "git diff --stat" on an unmerged path lost the
terminating LF in Git 2.39, which has been corrected.
* pg/diff-stat-unmerged-regression-fix:
diff: fix regression with --stat and unmerged file
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
The way the diff machinery prepares the options array for the
parse_options API has been refactored to avoid resource leaks.
* rs/diff-parseopts:
diff: remove parseopts member from struct diff_options
diff: use add_diff_options() in diff_opt_parse()
diff: factor out add_diff_options()
A regression was introduced in
12fc4ad89e (diff.c: use utf8_strwidth() to count display width, 2022-09-14)
that causes missing newlines after "Unmerged" entries in `git diff
--cached --stat` output.
This problem affects v2.39.0-rc0 through v2.39.0.
Add the missing newline along with a new test to cover this
behavior.
Signed-off-by: Peter Grayson <pete@jpgrayson.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take a ws_rule parameter, but have never looked at it since the
function was added in 877f23ccb8 (Teach "diff --check" about new blank
lines at end, 2008-06-26). A comment in the function does mention how we
_could_ use it, but nobody has felt the need to do so for over a decade.
We could keep it around as reminder of what could be done, but the
comment serves that purpose. And in the meantime, it triggers
-Wunused-parameter.
So let's drop it, which in turn allows us to drop similar arguments
further up the callstack. I've left the comment intact. It does still
say "ws_rule", but that name is used consistently in the whitespace
code, so the meaning is clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
repo_diff_setup() builds the struct option array with git diff's command
line options and stores a pointer to it in the parseopts member of
struct diff_options. The array is freed by diff_setup_done(), but not
by release_revisions(). Thus calling only repo_diff_setup() and
release_revisions() leaks that array.
We could free it in release_revisions() as well to plug that leak, but
there is a better way: Only build it when needed. Absorb
prep_parse_options() into the last place that uses the parseopts member
of struct diff_options, add_diff_parseopts(), and get rid of said
member.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare the removal of the parseopts member of struct diff_options by
using the API function add_diff_options() instead of accessing it
directly to get the command line option definitions. Building the copy
by concatenating with an empty option array is slightly awkward, but
simpler than a non-concat version of add_diff_options() would be to use
in places that need concatenation.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for appending the parseopts member of struct diff_options
to a struct option array. Use it in two sites instead of accessing the
parseopts member directly. Decoupling callers from diff internals like
that allows us to change the latter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of leaks in the line-log machinery have been plugged.
* sg/plug-line-log-leaks:
diff.c: use diff_free_queue()
line-log: free the diff queues' arrays when processing merge commits
line-log: free diff queue when processing non-merge commits
Simplify the run-command API.
* rs/no-more-run-command-v:
replace and remove run_command_v_opt()
replace and remove run_command_v_opt_cd_env_tr2()
replace and remove run_command_v_opt_tr2()
replace and remove run_command_v_opt_cd_env()
use child_process members "args" and "env" directly
use child_process member "args" instead of string array variable
sequencer: simplify building argument list in do_exec()
bisect--helper: factor out do_bisect_run()
bisect: simplify building "checkout" argument list
am: simplify building "show" argument list
run-command: fix return value comment
merge: remove always-the-same "verbose" arguments
Use diff_free_queue() instead of open-coding it. This shortens the
code and make it less repetitive.
Note that the second hunk in diff_flush() is interesting, because the
'free_queue' label separates the loop freeing the queue's filepairs
from free()-ing the queue's internal array. This is somewhat
suspicious, but it was not an issue before: there is only one place
from where we jump to this label with a goto, and that is protected by
an 'if (!q->nr && ...)' condition, i.e. we only skipped the loop
freeing the filepairs when there were no filepairs in the queue to
begin with.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When processing a non-merge commit, the line-level log first asks the
tree-diff machinery whether any of the files in the given line ranges
were modified between the current commit and its parent, and if some
of them were, then it loads the contents of those files from both
commits to see whether their line ranges were modified and/or need to
be adjusted. Alas, it doesn't free() the diff queue holding the
results of that query and the contents of those files once its done.
This can add up to a substantial amount of leaked memory, especially
when the file in question is big and is frequently modified: a user
reported "Out of memory, malloc failed" errors with a 2MB text file
that was modified ~2800 times [1] (I estimate the leak would use up
almost 11GB memory in that case).
Free that diff queue to plug this memory leak. However, instead of
simply open-coding the necessary three lines, add them as a helper
function to the diff API, because it will be useful elsewhere as well.
[1] https://public-inbox.org/git/CAFOPqVXz2XwzX8vGU7wLuqb2ZuwTuOFAzBLRM_QPk+NJa=eC-g@mail.gmail.com/
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
A new "--include-whitespace" option is added to "git patch-id", and
existing bugs in the internal patch-id logic that did not match
what "git patch-id" produces have been corrected.
* jz/patch-id:
builtin: patch-id: remove unused diff-tree prefix
builtin: patch-id: add --verbatim as a command mode
patch-id: fix patch-id for mode changes
builtin: patch-id: fix patch-id with binary diffs
patch-id: use stable patch-id for rebases
patch-id: fix stable patch id for binary / header-only
Build argument list and environment of child processes by using
struct child_process and populating its members "args" and "env"
directly instead of maintaining separate strvecs and letting
run_command_v_opt() and friends populate these members. This is
simpler, shorter and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git diff --stat" etc. were invented back when everything was ASCII
and strlen() was a way to measure the display width of a string;
adjust them to compute the display width assuming UTF-8 pathnames.
* tb/diffstat-with-utf8-strwidth:
diff: leave NEEDWORK notes in show_stats() function
diff.c: use utf8_strwidth() to count display width
Currently patch-id as used in rebase and cherry-pick does not account
for file modes if the file is modified. One consequence of this is
that if you have a local patch that changes modes, but upstream
has applied an outdated version of the patch that doesn't include
that mode change, "git rebase" will drop your local version of the
patch along with your mode changes. It also means that internal
patch-id doesn't produce the same output as the builtin, which does
account for mode changes due to them being part of diff output.
Fix by adding mode to the patch-id if it has changed, in the same
format that would be produced by diff, so that it is compatible
with builtin patch-id.
Signed-off-by: Jerry Zhang <Jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git doesn't persist patch-ids during the rebase process, so there is
no need to specifically invoke the unstable variant. Use the stable
logic for all internal patch-id calculations to minimize the number of
code paths and improve test coverage.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patch-ids for binary patches are found by hashing the object
ids of the before and after objects in succession. However in
the --stable case, there is a bug where hunks are not flushed
for binary and header-only patch ids, which would always result
in a patch-id of 0000. The --unstable case is currently correct.
Reorder the logic to branch into 3 cases for populating the
patch body: header-only which populates nothing, binary which
populates the object ids, and normal which populates the text
diff. All branches will end up flushing the hunk.
Don't populate the ---a/ and +++b/ lines for binary diffs, to correspond
to those lines not being present in the "git diff" text output.
This is necessary because we advertise that the patch-id calculated
internally and used in format-patch is the same that what the
builtin "git patch-id" would produce when piped from a diff.
Update the test to run on both binary and normal files.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous step made an attempt to correctly compute display
columns allocated and padded different parts of diffstat output.
There are at least two known codepaths in the function that still
mixes up display widths and byte length that need to be fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback interface for xdiff_emit_line_fn gives us a line/len pair,
but diffstat_consume() never looks at "len". At first glance this seems
like a bug that could cause us to read further than xdiff intends. But
in practice, we read only the first character, and xdiff would never
pass us an empty line.
Let's add a run-time assertion that this is true, which clarifies our
assumption and silences -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a few "git log --remerge-diff" bugs.
* en/remerge-diff-fixes:
diff: fix filtering of merge commits under --remerge-diff
diff: fix filtering of additional headers under --remerge-diff
diff: have submodule_format logic avoid additional diff headers
When unicode filenames (encoded in UTF-8) are used, the visible width
on the screen is not the same as strlen().
For example, `git log --stat` may produce an output like this:
[snip the header]
Arger.txt | 1 +
Ärger.txt | 1 +
2 files changed, 2 insertions(+)
A side note: the original report was about cyrillic filenames.
After some investigations it turned out that
a) This is not a problem with "ambiguous characters" in unicode
b) The same problem exists for all unicode code points (so we
can use Latin based Umlauts for demonstrations below)
The 'Ä' takes the same space on the screen as the 'A'.
But needs one more byte in memory, so the the `git log --stat` output
for "Arger.txt" (!) gets mis-aligned:
The maximum length is derived from "Ärger.txt", 10 bytes in memory,
9 positions on the screen. That is why "Arger.txt" gets one extra ' '
for aligment, it needs 9 bytes in memory.
If there was a file "Ö", it would be correctly aligned by chance,
but "Öhö" would not.
The solution is of course, to use utf8_strwidth() instead of strlen()
when dealing with the width on screen.
And then there is another problem, code like this:
strbuf_addf(&out, "%-*s", len, name);
(or using the underlying snprintf() function) does not align the
buffer to a minimum of len measured in screen-width, but uses the
memory count.
One could be tempted to wish that snprintf() was UTF-8 aware.
That doesn't seem to be the case anywhere (tested on Linux and Mac),
probably snprintf() uses the "bytes in memory"/strlen() approach to be
compatible with older versions and this will never change.
The basic idea is to change code in diff.c like this
strbuf_addf(&out, "%-*s", len, name);
into something like this:
int padding = len - utf8_strwidth(name);
if (padding < 0)
padding = 0;
strbuf_addf(&out, " %s%*s", name, padding, "");
The real change is slighty bigger, as it, as well, integrates two calls
of strbuf_addf() into one.
Tests:
Two things need to be tested:
- The calculation of the maximum width
- The calculation of padding
The name "textfile" is changed into "tëxtfilë", both have a width of 8.
If strlen() was used, to get the maximum width, the shorter "binfile" would
have been mis-aligned:
binfile | [snip]
tëxtfilë | [snip]
If only "binfile" would be renamed into "binfilë":
binfilë | [snip]
textfile | [snip]
In order to verify that the width is calculated correctly everywhere,
"binfile" is renamed into "binfilë", giving 1 bytes more in strlen()
"tëxtfile" is renamed into "tëxtfilë", 2 byte more in strlen().
The updated t4012-diff-binary.sh checks the correct aligment:
binfilë | [snip]
tëxtfilë | [snip]
Reported-by: Alexander Meshcheryakov <alexander.s.m@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
Commit 95433eeed9 ("diff: add ability to insert additional headers for
paths", 2022-02-02) introduced the possibility of additional headers.
Because there could be conflicts with no content differences (e.g. a
modify/delete conflict resolved in favor of taking the modified file
as-is), that commit also modified the diff_queue_is_empty() and
diff_flush_patch() logic to ensure these headers were included even if
there was no associated content diff.
However, the added logic was a bit inconsistent between these two
functions. diff_queue_is_empty() overlooked the fact that the
additional headers strmap could be non-NULL and empty, which would cause
it to display commits that should have been filtered out.
Fix the diff_queue_is_empty() logic to also account for
additional_path_headers being empty.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 95433eeed9 ("diff: add ability to insert additional headers for
paths", 2022-02-02) introduced the possibility of additional headers.
Because there could be conflicts with no content differences (e.g. a
modify/delete conflict resolved in favor of taking the modified file
as-is), that commit also modified the diff_queue_is_empty() and
diff_flush_patch() logic to ensure these headers were included even if
there was no associated content diff.
However, when the pickaxe is active, we really only want the remerge
conflict headers to be shown when there is an associated content diff.
Adjust the logic in these two functions accordingly.
This also removes the TEST_PASSES_SANITIZE_LEAK=true declaration from
t4069, as there is apparently some kind of memory leak with the pickaxe
code.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 95433eeed9 ("diff: add ability to insert additional headers for
paths", 2022-02-02) introduced the possibility of additional headers,
created in create_filepairs_for_header_only_notifications(). These are
represented by inserting additional pairs in diff_queued_diff which
always have a mode of 0 and a null_oid. When these were added, one
code path was noted to assume that at least one of the diff_filespecs
in the pair were valid, and that codepath was corrected.
The submodule_format handling is another codepath with the same issue;
it would operate on these additional headers and attempt to display them
as submodule changes. Prevent that by explicitly checking for "phoney"
filepairs (i.e. filepairs with both modes being 0).
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback passed to git_config() must conform to a particular
interface. But most callbacks don't actually look at the extra "void
*data" parameter. Let's mark the unused parameters to make
-Wunused-parameter happy.
Note there's one unusual case here in get_remote_default() where we
actually ignore the "value" parameter. That's because it's only checking
whether the option is found at all, and not parsing its value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of 'PARSE_OPT_KEEP_UNKNOWN' starts with "Keep unknown
arguments instead of erroring out". This is a bit misleading, as this
flag only applies to unknown --options, while non-option arguments are
kept even without this flag.
Update the description to clarify this, and rename the flag to
PARSE_OPTIONS_KEEP_UNKNOWN_OPT to make this obvious just by looking at
the flag name.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Coccinelle rules to detect the pattern of initializing and then
finalizing a structure without using it in between at all, which
happens after code restructuring and the compilers fail to
recognize as an unused variable.
* ab/cocci-unused:
cocci: generalize "unused" rule to cover more than "strbuf"
cocci: add and apply a rule to find "unused" strbufs
cocci: have "coccicheck{,-pending}" depend on "coccicheck-test"
cocci: add a "coccicheck-test" target and test *.cocci rules
Makefile & .gitignore: ignore & clean "git.res", not "*.res"
Makefile: remove mandatory "spatch" arguments from SPATCH_FLAGS
Add a coccinelle rule to remove "struct strbuf" initialization
followed by calling "strbuf_release()" function, without any uses of
the strbuf in the same function.
See the tests in contrib/coccinelle/tests/unused.{c,res} for what it's
intended to find and replace.
The inclusion of "contrib/scalar/scalar.c" is because "spatch" was
manually run on it (we don't usually run spatch on contrib).
Per the "buggy code" comment we also match a strbuf_init() before the
xmalloc(), but we're not seeking to be so strict as to make checks
that the compiler will catch for us redundant. Saying we'll match
either "init" or "xmalloc" lines makes the rule simpler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us once again to get away with less data copying.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses temporary files to pass the contents of blobs to external diff
programs and textconv filters. It calls mks_tempfile_ts() to create
them, which puts them all in the same directory. This requires adding
a random name prefix.
Use mks_tempfile_dt() instead, which allows the files to have arbitrary
names, each in their own separate temporary directory. This way they
can have the same basename as the original blob, which looks nicer in
graphical diff programs.
The test in t4020 to check the prettiness of the temporary paths was
neutered by 5476bdf0e8 (diff tests: don't ignore "git diff" exit code in
"read" loop, 2022-03-07), which removed its grep check without replacing
it with an equivalent test_cmp check. Add one that only checks the
basename of the temporary file and nothing else.
And make the test more robust while at it, by using test_when_finished
to get rid of the added file even if the test fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My a18d66cefb (diff.c: free "buf" in diff_words_flush(), 2022-03-04)
has what it retrospect is a rather obvious bug (I don't know what I
was thinking, if it all): We use the "emitted_symbols" allocation in
append_emitted_diff_symbol() N times, but starting with a18d66cefb
we'd free it after its first use!
The correct way to free this data would have been to add the free() to
the existing free_diff_words_data() function, so let's do that. The
"ecbdata->diff_words->opt->emitted_symbols" might be NULL, so let's
add a trivial free_emitted_diff_symbols() helper next to the function
that appends to it.
This fixes the "no effect on show from" leak tested for in the
preceding commit. Perhaps confusingly this change will skip that test
under SANITIZE=leak, but otherwise opt-in the
"t4015-diff-whitespace.sh" test.
The reason is that a18d66cefb "fixed" the leak in the preceding "no
effect on diff" test, but for the first call to diff_words_flush() the
"wol->buf" would be NULL, so we wouldn't double-free (and
SANITIZE=address would see nothing amiss). With this change we'll
still pass that test, showing that we've also fixed leaks on this
codepath.
We then have to skip the new "no effect on show" test because it
happens to trip over an unrelated memory leak (in revision.c). The
same goes for "move detection with submodules". Both of them pass with
SANITIZE=address though, which would error on the "no effect on show"
test before this change.
Reported-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug random memory leaks.
* ab/plug-random-leaks:
repository.c: free the "path cache" in repo_clear()
range-diff: plug memory leak in read_patches()
range-diff: plug memory leak in common invocation
lockfile API users: simplify and don't leak "path"
commit-graph: stop fill_oids_from_packs() progress on error and free()
commit-graph: fix memory leak in misused string_list API
submodule--helper: fix trivial leak in module_add()
transport: stop needlessly copying bundle header references
bundle: call strvec_clear() on allocated strvec
remote-curl.c: free memory in cmd_main()
urlmatch.c: add and use a *_release() function
diff.c: free "buf" in diff_words_flush()
merge-base: free() allocated "struct commit **" list
index-pack: fix memory leaks
Amend the freeing logic added in e6e045f803 (diff.c: buffer all
output if asked to, 2017-06-29) to free the containing "buf" in
addition to its members.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usage strings for git (sub)command flags has a style guide that
suggests - first letter should not capitalized (unless required)
and it should skip full-stop at the end of line. But there are
some files where usage-strings do not follow the above mentioned
guide.
Amend the usage strings that don't follow the style convention/guide.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
