When submodule.$name.update is given as hint from the upstream in
the .gitmodules file, we used to blindly copy it to .git/config,
unless there already is a value defined for the submodule.
However, there is no reason to expect that the update mode hinted by
the upstream is available in the version of Git the user is using,
and a really custom "!cmd" prepared by an upstream person running on
Linux may not even be available to a user on Windows. It is simply
irresponsible to copy the setting blindly and to attempt to use it
during a later "submodule update" without validating it first.
Just show the suggested value to the diagnostic output, and set the
value to 'none' in the configuration, if it is not one of the ones
that are known to be supported by this version of Git.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_update() in the submodule script tries to preserve the options given
on the command line in the "orig_flags" variable to pass them on into the
recursion when the '--recursive' option is given. But this isn't necessary
because all the variables set by the options will be seen in the recursion
too as that is achieved by executing "eval cmd_update".
The same has already been done for cmd_status() in e15bec0ec, so let's
clean up cmd_update() likewise. Also add a test to make sure that a
submodule name given on the command line is not passed into the recursion
(which was the goal of adding the orig_flags variable in 98dbe63db).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several of the built shell commands invoke a bare "perl" to
perform some one-liners. This will use the first perl in the
PATH rather than the one specified by the user's SHELL_PATH.
We are not asking these perl invocations to do anything
exotic, so typically any old system perl will do; however,
in some cases the system perl may have unexpected behavior
(e.g., by handling line endings differently). We should err
on the side of using the perl the user pointed us to.
The downside of this is that on systems with a sane perl
setup, we no longer find the perl at runtime, but instead
point to a static perl (like /usr/bin/perl). That means we
will not handle somebody moving perl without rebuilding git,
whereas before we tracked it just fine. This is probably not
a big deal, though, as the built perl scripts already
suffered from this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'eval "$@"' creates an extra layer of shell interpretation, which is
probably not expected by a user who passes multiple arguments to git
submodule foreach:
$ git grep "'"
[searches for single quotes]
$ git submodule foreach git grep "'"
Entering '[submodule]'
/usr/lib/git-core/git-submodule: 1: eval: Syntax error: Unterminated quoted string
Stopping at '[submodule]'; script returned non-zero status.
To fix this, if the user passes more than one argument, execute "$@"
directly instead of passing it to eval.
Examples:
* Typical usage when adding an extra level of quoting is to pass a
single argument representing the entire command to be passed to the
shell. This doesn't change that.
* One can imagine someone feeding untrusted input as an argument:
git submodule foreach git grep "$variable"
That currently results in a nonobvious shell code injection
vulnerability. Executing the command named by the arguments
directly, as in this patch, fixes it.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
* bc/submodule-status-ignored:
Improve documentation concerning the status.submodulesummary setting
submodule: don't print status output with ignore=all
submodule: fix confusing variable name
The --for-status option was an undocumented option used only by
wt-status.c, which inserted a header and commented out the output. We can
achieve the same result within wt-status.c, without polluting the
submodule command-line options.
This will make it easier to disable the comments from wt-status.c later.
The --for-status is kept so that another topic in flight
(bc/submodule-status-ignored) can continue relying on it, although it is
currently a no-op.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status prints information for submodules, but it should ignore the status of
those which have submodule.<name>.ignore set to all. Fix it so that it does
properly ignore those which have that setting either in .git/config or in
.gitmodules.
Not ignored are submodules that are added, deleted, or moved (which is
essentially a combination of the first two) because it is not easily possible to
determine the old path once a move has occurred, nor is it easily possible to
detect which adds and deletions are moves and which are not. This also
preserves the previous behavior of always listing modules which are to be
deleted.
Tests are included which verify that this change has no effect on git submodule
summary without the --for-status option.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_summary reads the output of git diff, but reads in the submodule path into a
variable called name. Since this variable does not contain the name of the
submodule, but the path, rename it to be clearer what data it actually holds.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --depth option to the add and update commands of "git submodule",
which is then passed on to the clone command. This is useful when the
submodule(s) are huge and you're not really interested in anything but
the latest commit.
Tests are added and some indention adjustments were made to conform to the
rest of the testfile on "submodule update can handle symbolic links in pwd".
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users can set submodule.$name.update to '!command' which will cause
'command' to be run instead of checkout/merge/rebase. This allows
the user finer-grained control over how the update is done.
The primary motivation for this was interoperability with stgit;
however being able to intercept the submodule update process may
prove useful for integrating with or extending other tools.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow various subcommands of "git submodule" to be run not from the
top of the working tree of the superproject.
* jk/submodule-subdirectory-ok:
submodule: drop the top-level requirement
rev-parse: add --prefix option
submodule: show full path in error message
t7403: add missing && chaining
t7403: modernize style
t7401: make indentation consistent
Many "git submodule" operations do not work on a submodule at a
path whose name is not in ASCII.
* fg/submodule-non-ascii-path:
t7400: test of UTF-8 submodule names pass under Mac OS
handle multibyte characters in name
Use the new rev-parse --prefix option to process all paths given to the
submodule command, dropping the requirement that it be run from the
top-level of the repository.
Since the interpretation of a relative submodule URL depends on whether
or not "remote.origin.url" is configured, explicitly block relative URLs
in "git submodule add" when not at the top level of the working tree.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --recursive was added to "submodule foreach" in commit 15fc56a (git
submodule foreach: Add --recursive to recurse into nested submodules,
2009-08-19), the error message when the script returns a non-zero status
was not updated to contain $prefix to show the full path. Fix this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
set_rev_name is a possiblly expensive operation. If a submodule has
changes in it, set_rev_name was called twice.
Move call to set_rev_name so it's only called once, no matter which
codepath is taken.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many "git submodule" operations do not work on a submodule at a path whose
name is not in ASCII.
This is because "git ls-files" is used to find which paths are bound to
submodules to the current working tree, and the output is C-quoted by default
for non ASCII pathnames.
Tell "git ls-files" to not C-quote its output, which is easier than unwrapping
C-quote ourselves.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"submodule summary --summary-limit" option did not support
"--option=value" form.
* rs/submodule-summary-limit:
submodule summary: support --summary-limit=<n>
The output of "git submodule deinit sub" of a populated submodule prints
rm 'sub'
as the first line unless used with the -f option.
The "rm 'sub'" line is exactly the same output the user gets when using
"git rm sub" (because that command is used with the --dry-run option under
the hood to determine if the submodule is clean), which can easily lead to
the false impression that the submodule would be permanently removed. Also
users might be confused that the "rm 'submodule'" line won't show up when
the -f option is used, as the test is skipped in this case.
Silence the "rm 'submodule'" output by using the --quiet option for "git
rm" and always print
Cleared directory 'submodule'
instead as the first output line. This line is printed as long as the
directory exists, no matter if empty or not.
Also extend the tests in t7400 to make sure the "Cleared directory" line
is printed correctly.
Reported-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to "--summary-limit <n>" support the form "--summary-limit=<n>",
for consistency with other parameters and commands.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update", when recursed into sub-submodules, did not
acccumulate the prefix paths.
* we/submodule-update-prefix-output:
submodule update: when using recursion, show full path
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
"git submodule update", when recursed into sub-submodules, did not
acccumulate the prefix paths.
* we/submodule-update-prefix-output:
submodule update: when using recursion, show full path
With "git submodule init" the user is able to tell git he cares about one
or more submodules and wants to have it populated on the next call to "git
submodule update". But currently there is no easy way he could tell git he
does not care about a submodule anymore and wants to get rid of his local
work tree (except he knows a lot about submodule internals and removes the
"submodule.$name.url" setting from .git/config together with the work tree
himself).
Help those users by providing a 'deinit' command. This removes the
whole submodule.<name> section from .git/config (either for the given
submodule(s) or for all those which have been initialized if '.' is used)
together with their work tree. Fail if the current work tree contains
modifications (unless forced), but don't complain when either the work
tree is already removed or no settings are found in .git/config.
Add tests and link the man pages of "git submodule deinit" and "git rm"
to assist the user in deciding whether removing or unregistering the
submodule is the right thing to do for him. Also add the deinit subcommand
to the completion list.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously when using update with recursion, only the path for the
inner-most module was printed. Now the path is printed relative to
the directory the command was started from. This now matches the
behavior of submodule foreach.
Signed-off-by: William Entriken <github.com@phor.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows you to easily record a submodule.<name>.branch option in
.gitmodules when you add a new submodule. With this patch,
$ git submodule add -b <branch> <repository> [<path>]
$ git config -f .gitmodules submodule.<path>.branch <branch>
reduces to
$ git submodule add -b <branch> <repository> [<path>]
This means that future calls to
$ git submodule update --remote ...
will get updates from the same branch that you used to initialize the
submodule, which is usually what you want.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current `update` command incorporates the superproject's gitlinked
SHA-1 ($sha1) into the submodule HEAD ($subsha1). Depending on the
options you use, it may checkout $sha1, rebase the $subsha1 onto
$sha1, or merge $sha1 into $subsha1. This helps you keep up with
changes in the upstream superproject.
However, it's also useful to stay up to date with changes in the
upstream subproject. Previous workflows for incorporating such
changes include the ungainly:
$ git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
With this patch, all of the useful functionality for incorporating
superproject changes can be reused to incorporate upstream subproject
updates. When you specify --remote, the target $sha1 is replaced with
a $sha1 of the submodule's origin/master tracking branch. If you want
to merge a different tracking branch, you can configure the
`submodule.<name>.branch` option in `.gitmodules`. You can override
the `.gitmodules` configuration setting for a particular superproject
by configuring the option in that superproject's default configuration
(using the usual configuration hierarchy, e.g. `.git/config`,
`~/.gitconfig`, etc.).
Previous use of submodule.<name>.branch
=======================================
Because we're adding a new configuration option, it's a good idea to
check if anyone else is already using the option. The foreach-pull
example above was described by Ævar in
commit f030c96d86
Author: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Fri May 21 16:10:10 2010 +0000
git-submodule foreach: Add $toplevel variable
Gerrit uses the same interpretation for the setting, but because
Gerrit has direct access to the subproject repositories, it updates
the superproject repositories automatically when a subproject changes.
Gerrit also accepts the special value '.', which it expands into the
superproject's branch name.
Although the --remote functionality is using `submodule.<name>.branch`
slightly differently, the effect is the same. The foreach-pull
example uses the option to record the name of the local branch to
checkout before pulls. The tracking branch to be pulled is recorded
in `.git/modules/<name>/config`, which was initialized by the module
clone during `submodule add` or `submodule init`. Because the branch
name stored in `submodule.<name>.branch` was likely the same as the
branch name used during the initial `submodule add`, the same branch
will be pulled in each workflow.
Implementation details
======================
In order to ensure a current tracking branch state, `update --remote`
fetches the submodule's remote repository before calculating the
SHA-1. However, I didn't change the logic guarding the existing fetch:
if test -z "$nofetch"
then
# Run fetch only if $sha1 isn't present or it
# is not reachable from a ref.
(clear_local_git_env; cd "$path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
die "$(eval_gettext "Unable to fetch in submodule path '\$path'")"
fi
There will not be a double-fetch, because the new $sha1 determined
after the `--remote` triggered fetch should always exist in the
repository. If it doesn't, it's because some racy process removed it
from the submodule's repository and we *should* be re-fetching.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several submodule configuration variables
(e.g. fetchRecurseSubmodules) are read from .gitmodules with local
overrides from the usual git config files. This shell function mimics
that logic to help initialize configuration variables in
git-submodule.sh.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleans up some leftover bits from an earlier submodule change.
* ph/maint-submodule-status-fix:
submodule status: remove unused orig_* variables
t7407: Fix recursive submodule test
If you remove a submodule, in order to keep the repository so that
"git checkout" to an older commit in the superproject history can
resurrect the submodule, the real repository will stay in $GIT_DIR
of the superproject. A later "git submodule add $path" to add a
different submodule at the same path will fail. Diagnose this case
a bit better, and if the user really wants to add an unrelated
submodule at the same path, give the "--name" option to give it a
place in $GIT_DIR of the superproject that does not conflict with
the original submodule.
* jl/submodule-add-by-name:
submodule add: Fail when .git/modules/<name> already exists unless forced
Teach "git submodule add" the --name option
The submodule sync command was somehow left out when
--recursive was added to the other submodule commands.
Teach sync to handle the --recursive switch by recursing
when we're in a submodule we are sync'ing.
Change the report during sync to show submodule-path
instead of submodule-name to be consistent with the other
submodule commands and to help recursed paths make sense.
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-By: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jeff King <peff@peff.net>
When renaming orig_args to orig_flags in 98dbe63d (submodule: only
preserve flags across recursive status/update invocations) the call site
of the recursive cmd_status was forgotten. At that place orig_args is
still passed into the recursion, which is always empty since then. This
did not break anything because the orig_flags logic is not needed at all
when a function from the submodule script is called with eval, as that
inherits all the variables set by the option parsing done in the first
level of the recursion.
Now that we know that orig_flags and orig_args aren't needed at all,
let's just remove them from cmd_status().
Thanks-to: Phil Hord <hordp@cisco.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Doing a shift here is wrong because there is no extra
argument to consume when "--reference=<repo>" is used (note
the '=' instead of a space).
Signed-off-by: Stefan Zager <szager@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Use "-b <branch>" instead of "-b branch". This brings the usage
strings in line with other options, e.g. "--reference <repository>".
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Jeff King <peff@peff.net>
"git submodule frotz" was not diagnosed as "frotz" being an unknown
subcommand to "git submodule"; the user instead got a complaint that
"git submodule status" was run with an unknown path "frotz".
* rr/maint-submodule-unknown-cmd:
submodule: if $command was not matched, don't parse other args
When adding a new submodule it can happen that .git/modules/<name> already
contains a submodule repo, e.g. when a submodule is removed from the work
tree and another submodule is added at the same path. But then the work
tree of the submodule will be populated using the existing repository and
not the one the user provided, which results in an incorrect work tree. On
the other hand the user might reactivate a submodule removed earlier, then
reusing that .git directory is the Right Thing to do.
As git can't decide what is the case, error out and tell the user she
should use either use a different name for the submodule with the "--name"
option or can reuse the .git directory for the newly added submodule by
providing the --force option (which only makes sense when the upstream
matches, so the error message lists all remotes of .git/modules/<name>).
In one test in t7406 the --force option had to be added to "git submodule
add", as that test re-adds a formerly removed submodule.
Reported-by: Jonathan Johnson <me@jondavidjohn.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule add" initializes the name of a submodule to its path. This
was ok as long as the .git directory lived inside the submodule's work
tree, but since 1.7.8 it is stored in the .git/modules/<name> directory of
the superproject, making the submodule name survive the removal of the
submodule's work tree. This leads to problems when the user tries to add a
different submodule at the same path - and thus the same name - later, as
that will happily try to restore the submodule from the old repository
instead of the one the user specified and will lead to a checkout of the
wrong repository.
Add the new "--name" option to let the user provide a name for the
submodule. This enables the user to solve this conflict without having to
remove .git/modules/<name> by hand (which is no viable solution as it
makes it impossible to checkout a commit that records the old submodule
and populate it, as that will still check out the new submodule for the
same reason).
To achieve that the submodule's name is added to the parameter list of
the module_clone() helper function. This makes it possible to remove the
call of module_name() there because both callers of module_clone() already
know the name and can provide it as argument number two.
Reported-by: Jonathan Johnson <me@jondavidjohn.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" command DWIMs the command line and assumes a
unspecified action word for 'status' action. This is a UI mistake
that leads to a confusing behaviour. A mistyped command name is
instead treated as a request for 'status' of the submodule with that
name, e.g.
$ git submodule show
error: pathspec 'show' did not match any file(s) known to git.
Did you forget to 'git add'?
Stop DWIMming an unknown or mistyped subcommand name as pathspec
given to unspelled "status" subcommand. "git submodule" without any
argument is still interpreted as "git submodule status", but its
value is questionable.
Adjust t7400 to match, and stop advertising the default subcommand
being 'status' which does not help much in practice, other than
promoting laziness and confusion.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update --force" used to leave the working tree of the
submodule intact when there were local changes. It is more intiutive
to make "--force" a sign to run "checkout -f" to overwrite them.
* sz/submodule-force-update:
Make 'git submodule update --force' always check out submodules.
Currently, it will only do a checkout if the sha1 registered in the containing
repository doesn't match the HEAD of the submodule, regardless of whether the
submodule is dirty. As discussed on the mailing list, the '--force' flag is a
strong indicator that the state of the submodule is suspect, and should be reset
to HEAD.
Signed-off-by: Stefan Zager <szager@google.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various subcommands of the "git submodule" command exited with 0
status even though the path given by the user did not exist.
The reason behind that was that they all pipe the output of
module_list into the while loop which then does the action on the
paths specified by the commandline. Since the exit code of the
command on the upstream side of the pipe is ignored by the shell,
the status code of "ls-files --error-unmatch" nor "module_list" was
not propagated.
In case ls-files returns with an error code, we write a special
string that is not possible in non error situations, and no other
output, so that the downstream can detect the error and die with an
error code.
The error message that there is an unmatched pathspec comes through
stderr directly from ls-files. So the user still gets a hint whats going
on.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
Gettext message in a shell script should not start with '-', one
workaround is adding '--' between gettext and the message, like:
gettext -- "--exec option ..."
But due to a bug in the xgettext extraction, xgettext can not
extract the actual message for this case. Rewriting the message
is a simpler and better solution.
Reported-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combination of GIT_DIR and GIT_WORK_TREE can be used to manage
files in one directory hierarchy while keeping the repository that
keeps track of them outside the directory hierarchy. For example:
git init --bare /path/to/there
alias dotfiles="GIT_DIR=/path/to/there GIT_WORK_TREE=/path/to/here git"
cd /path/to/here
dotfiles add file
dotfiles commit -a -m "add /path/to/here/file"
...
lets you manage files under /path/to/here/ in the repository located
at /path/to/there.
git-submodule however fails to add submodules, as it is confused by
GIT_DIR and GIT_WORK_TREE environment variables when it tries to
work in the submodule, like so:
dotfiles submodule add http://path.to/submodule
fatal: working tree '/path/to/here' already exists.
Simply unsetting the environment where the command works on the
submodule is sufficient to fix this, as it has set things up so
that GIT_DIR and GIT_WORK_TREE do not even have to point at the
repository and the working tree of the submodule.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
Since 69c3051 (submodules: refactor computation of relative gitdir path)
cloning a submodule recursively fails for nested submodules when a
symbolic link is part of the path to the work tree of the superproject.
This happens when module_clone() tries to find the relative paths between
the work tree and the git dir. When a symbolic link in current $PWD points
to a directory that is at a different level, then determining the number
of "../" needed to traverse to the superproject's work tree leads to a
wrong result.
As there is no portable way to say "pwd -P", use cd_to_toplevel to remove
the link from $PWD, which fixes this problem.
A test for this issue has been added to t7406.
Reported-by: Bob Halley <halley@play-bow.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git submodule" deal with nested submodule structure where a
module is contained within a module whose origin is specified as a
relative URL to its superproject's origin.
Currently git submodule init and git submodule sync fail with an error
if the superproject origin URL is of the form foo but succeed if the
superproject origin URL is of the form ./foo or ./foo/bar or foo/bar.
This change makes handling of the foo case behave like the handling
of the ./foo case and also ensures that superfluous leading and
embedded ./'s are removed from the resulting derived URLs.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the origin URL of the superproject is itself relative, git submodule sync
configures the remote.origin.url configuration property of the submodule
with a path that is relative to the work tree of the superproject
rather than the work tree of the submodule.
To fix this an 'up_path' that navigates from the work tree of the submodule
to the work tree of the superproject needs to be prepended to the URL
otherwise calculated.
Correct handling of superproject origin URLs like foo, ./foo and ./foo/bar is
left to a subsequent patch since an additional change is required to handle
these cases.
The documentation of resolve_relative_url() is expanded to give a more thorough
description of the function's objective.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 2cd9de3e (submodule add: always initialize .git/config entry) the
message "Submodule '\$name' (\$url) registered for path '\$sm_path'" is
printed every time cmd_init() is called, e.g. each time "git submodule
update" is used with the --init option.
This was not intended and leads to bogus output which can confuse users
and build systems. Apart from that the $url variable was not set after the
first run which did the actual initialization and only "()" was printed
in subsequent runs where "($url)" was meant to inform the user about the
upstream repo.
Fix that by moving the say command in question into the if block where the
url is initialized, restoring the behavior that was in place before the
2cd9de3e commit. While at it also remove the comment which still describes
the logic used before 2cd9de3e and add a comment about how things work now.
Reported-by: Nicolas Viennot and Sid Nair <nicolas@viennot.com>
Reported-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The eval_gettext (and eval_gettextln) i18n shell functions call
git-sh-i18n--envsubst to process the variable references in the
string parameter. Unfortunately, environment variables are case
insensitive on windows, which leads to failure on cygwin when
eval_gettext exports $path.
Commit df599e9 (Windows: teach getenv to do a case-sensitive search,
06-06-2011) attempts to solve this problem on MinGW by overriding
the system getenv() function to allow git-sh-i18n--envsubst to read
$path rather than $PATH from the environment. However, this commit
does not address cygwin at all and, furthermore, does not fix all
problems on MinGW.
In particular, when executing test #38 in t7400-submodule-basic.sh,
an 'git-sh-i18n-envsubst.exe - Unable To Locate Component' dialog
pops up saying that the application "failed to start because
libiconv2.dll was not found." After studying the voluminous trace
output from the process monitor, it is clear that the system is
attempting to use $path, rather than $PATH, to search for the DLL
file. (Note that, after dismissing the dialog, the test passes
anyway!)
As an alternative, we finesse the problem by renaming the $path
variable to $sm_path (submodule path). This fixes the problem on
MinGW along with all test failures on cygwin (t7400.{7,32,34},
t7406.3 and t7407.{2,6}). We note that the foreach subcommand
provides $path to user scripts (ie it is part of the API), so we
can't simply rename it to $sm_path.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sed provided by Solaris in /usr/xpg4/bin has a bug whereby an
unanchored regex using * for zero or more repetitions sees two
separate matches fed to the substitution engine in some cases.
This is evidenced by:
$ for sed in /usr/xpg4/bin/sed /usr/bin/sed /opt/csw/gnu/sed; do \
echo 'ab' | $sed -e 's|[a]*|X|g'; \
done
XXbX
XbX
XbX
This bug was triggered during a git submodule clone operation as
exercised in the setup stage of t5526-fetch-submodules when using the
default SANE_TOOL_PATH for Solaris. It led to paths such as
..../.. being used in the submodule .git gitdir reference.
Using the expression 's|\([^/]*\(/*\)\)|..\2|g' provides the desired
result with all three three tested sed implementations but is harder
to read. As we do not need to handle fully qualified paths though,
the expression could actually be [^/]+ which isn't properly handled
either. Instead, use [^/][^/]*, as suggested by Andreas Schwab, which
works on all three tested sed implementations.
The new expression is semantically different than the original one.
It will not place a leading '..' on a fully qualified path as the
original expression did. All of the paths being passed through this
regex are relative and did not rely on this behaviour so it's a safe
change.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under Windows the "git rev-parse --git-dir" and "pwd" commands may return
either drive-letter-colon or POSIX style paths. This makes module_clone()
behave badly because it expects absolute paths to always start with a '/'.
Fix that by always converting the "c:/" notation into "/c/" when computing
the relative paths from gitdir to the submodule work tree and back.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In module_clone() the rel_gitdir variable was computed differently when
"git rev-parse --git-dir" returned a relative path than when it returned
an absolute path. This is not optimal, as different code paths are used
depending on the return value of that command.
Fix that by reusing the differing path components computed for setting the
core.worktree config setting, which leaves a single code path for setting
both instead of having three and makes the code much shorter.
This also fixes the bug that in the computation of how many directories
have to be traversed up to hit the root directory of the submodule the
name of the submodule was used where the path should have been used. This
lead to problems after renaming submodules into another directory level.
Even though the "(cd $somewhere && pwd)" approach breaks the flexibility
of symlinks, that is no issue here as we have to have one relative path
pointing from the work tree to the gitdir and another pointing back, which
will never work anyway when a symlink along one of those paths is changed
because the directory it points to was moved.
Also add a test moving a submodule into a deeper directory to catch any
future breakage here and to document what has to be done when a submodule
needs to be moved until git mv learns to do that. Simply moving it to the
new location doesn't work, as the core.worktree and possibly the gitfile
setting too will be wrong. So it has to be removed from filesystem and
index, then the new location has to be added into the index and the
.gitmodules file has to be updated. After that a git submodule update will
check out the submodule at the new location.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. To make that work the git directory has
the core.worktree configuration set in its config file to point back to
the work tree.
That core.worktree is an absolute path set by the initial clone of the
submodule. A relative path is preferable here because it allows the
superproject to be moved around without invalidating that setting, so
compute and set that relative path after cloning or reactivating the
submodule.
This also fixes a bug when moving a submodule around inside the
superproject, as the current code forgot to update the setting to the new
submodule work tree location.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident and that moving a superproject won't break submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. When the submodule git directory needs
to be cloned because it is not found in .git/modules/<name> the clone
command will write an absolute path into the gitfile. When no clone is
necessary the git directory will be reactivated by the git-submodule.sh
script by writing a relative path into the gitfile.
This is inconsistent, as the behavior depends on the submodule having been
cloned before into the .git/modules of the superproject. A relative path
is preferable here because it allows the superproject to be moved around
without invalidating the gitfile. We do that by always writing the
relative path into the gitfile, which overwrites the absolute path the
clone command may have written there.
This is only the first step to make superprojects movable again like they
were before the separate-git-dir approach was introduced. The second step
is to use a relative path in core.worktree too.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident.
While at it also replace an if/else construct evaluating the presence
of the 'reference' option with a single line of bash code.
Reported-by: Antony Male <antony.male@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there.
When the same submodule is added on a branch where it wasn't present so
far (it is not found in the .gitmodules file), the name is not initialized
from the path as it should. This leads to a wrong path entered in the
gitfile when the .git/modules/<name> directory is found, as this happily
uses the - now empty - name. It then always points only a single directory
up, even if we have a path deeper in the directory hierarchy.
Fix that by initializing the name of the submodule early in module_clone()
if module_name() returned an empty name and add a test to catch that bug.
Reported-by: Jehan Bing <jehan@orb.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() message that may occur in module_name() is not really relevant
to the user when called from module_clone(); the latter handles the
"failure" (no submodule mapping) anyway.
Analysis of other callsites is left to future work.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/i18n-scripts:
submodule: take advantage of gettextln and eval_gettextln.
stash: take advantage of eval_gettextln
pull: take advantage of eval_gettextln
git-am: take advantage of gettextln and eval_gettextln.
gettext: add gettextln, eval_gettextln to encode common idiom
Move git-dir for submodules into $GIT_DIR/modules/[name_of_submodule] of
the superproject. This is a step towards being able to delete submodule
directories without loosing the information from their .git directory
as that is now stored outside the submodules work tree.
This is done relying on the already existent .git-file functionality.
When adding or updating a submodule whose git directory is found under
$GIT_DIR/modules/[name_of_submodule], don't clone it again but simply
point the .git-file to it and remove the now stale index file from it.
The index will be recreated by the following checkout.
This patch will not affect already cloned submodules at all.
Tests that rely on .git being a directory have been fixed.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --quiet flag "git submodule update" and "git submodule add"
didn't behave as the documentation stated. They printed progress output
from the clone, even though they should only print error messages.
Fix that by passing the -q flag to git clone in module_clone() when the
GIT_QUIET variable is set. Two tests in t7400 have been modified to test
that behavior.
Reported-by: Daniel Holtmann-Rice <flyingtabmow@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-add-relurl-wo-upstream:
submodule add: clean up duplicated code
submodule add: allow relative repository path even when no url is set
submodule add: test failure when url is not configured in superproject
Conflicts:
git-submodule.sh
* bc/submodule-foreach-stdin-fix-1.7.4:
git-submodule.sh: preserve stdin for the command spawned by foreach
t/t7407: demonstrate that the command called by 'submodule foreach' loses stdin
Conflicts:
git-submodule.sh
* fg/submodule-keep-updating:
git-submodule.sh: clarify the "should we die now" logic
submodule update: continue when a checkout fails
git-sh-setup: add die_with_status
Conflicts:
git-submodule.sh
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. The user-supplied
command supplied to 'submodule foreach' is spawned within a while loop
which is being piped into. Due to the way shells implement piping output
to a while loop, a subshell is created with its standard input attached to
the output of the pipe. This results in all of the commands executed
within the while loop to have their stdins modified in the same way,
including the user-supplied command.
This can cause a problem if the command requires reading from stdin or if
it changes its behavior based on whether stdin is a tty or not. For
example, this problem was noticed when trying to execute the following:
git submodule foreach git shortlog --since=two.weeks.ago
which printed a message about entering the first submodule and produced no
further output and exited with a status of zero. In this case, shortlog
detected that it was not connected to a tty, and since no revision was
supplied as an argument, it attempted to read the list of revisions from
standard input. Instead, it slurped up the list of submodules that was
being piped to the enclosing while loop and caused that loop to end early
without processing the remaining submodules.
Work around this behavior by saving the original standard input file
descriptor before the while loop, and restoring it when spawning the
user-supplied command.
This fixes the tests in t7407.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule add $path" is run to add a subdirectory $path to the
superproject, and $path is already the top of the working tree of the
submodule repository, the command created submodule.$path.url entry in the
configuration file in the superproject. However, when adding a repository
$URL that is outside the respository of the superproject to $path that
does not exist (yet) with "git submodule add $URL $path", the command
forgot to set it up.
The user is expressing the interest in the submodule and wants to keep a
checkout, the "submodule add" command should consistently set up the
submodule.$path.url entry in either case.
As a result "git submodule init" can't simply skip the initialization of
those submodules for which it finds an url entry in the git./config
anymore. That lead to problems when adding a submodule (which now sets the
url), add the "update" setting to .gitmodules and expect init to copy that
into .git/config like it is done in t7406. So change init to only then
copy the "url" and "update" entries when they don't exist yet in the
.git/config and do nothing otherwise.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier 33f072f (submodule sync: Update "submodule.<name>.url" for empty
directories, 2010-10-08) attempted to fix a bug where "git submodule sync"
command does not update the URL if the current superproject does not have
a checkout of the submodule.
However, it did so by unconditionally registering submodule.$name.url to
every submodule in the project, even the ones that the user has never
showed interest in at all by running 'git submodule init' command. This
caused subsequent 'git submodule update' to start cloning/updating submodules
that are not interesting to the user at all.
Update the code so that the URL is updated from the .gitmodules file only
for submodules that already have submodule.$name.url entries, i.e. the
ones the user has showed interested in having a checkout.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier the decision to stop or continue was made on the $action variable
that was set by inspecting $update_module variable. The former is a
redundant variable and will be removed in another topic.
Decide upon inspecting $update_module if a failure should cascade up to
cause us immediately stop, and use a variable that means just that, to
clarify the logic.
Incidentally this also makes the merge with the other topic slightly
easier and cleaner to understand.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update" stops at the first error and gives control
back to the user. Only after the user fixes the problematic
submodule and runs "git submodule update" again, the second error
is found. And the user needs to repeat until all the problems are
found and fixed one by one. This is tedious.
Instead, the command can remember which submodules it had trouble with,
continue updating the ones it can, and report which ones had errors at
the end. The user can run "git submodule update", find all the ones that
need minor fixing (e.g. working tree was dirty) to fix them in a single
pass. Then another "git submodule update" can be run to update all.
Note that the problematic submodules are skipped only when they are to
be integrated with a safer value of submodule.<name>.update option,
namely "checkout". Fixing a failure in a submodule that uses "rebase" or
"merge" may need an involved conflict resolution by the user, and
leaving too many submodules in states that need resolution would not
reduce the mental burden on the user.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cmd_add() the switch statement used to resolve a relative url was
present twice. Remove the second one and use the realrepo variable set
by the first one (lines 194 ff.) instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding a submodule with a relative repository path did only succeed when
the superproject's default remote was set. But when that is unset, the
superproject is its own authoritative upstream, so lets use its working
directory as upstream instead.
This allows users to set up a new superpoject where the submodules urls
are configured relative to the superproject's upstream while its default
remote can be configured later.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-submodule.sh: separate parens by a space to avoid confusing some shells
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
Some shells interpret '(( ))' according to the rules for arithmetic
expansion. This may not follow POSIX, but is prevalent in commonly used
shells. Bash does not have a problem with this particular instance of
'((', likely because it is not followed by a '))', but the public domain
ksh does, and so does ksh on IRIX 6.5.
So, add a space between the parenthesis to avoid confusing these shells.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the words "blob" and "submodule", which will be
interpolated in a message emitted by git-submodule. This is
explicitly tested for so we need to skip a portion of a test with
test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Submodule path '$path' not initialized" message. This
is explicitly tested for so we need to skip a portion of a test with
test_i18grep.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "The following path is ignored" message. This is
explicitly tested for so we need to skip a portion of a test with
test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Entering [...]" message. This is explicitly tested for
so we need to skip a portion of a test with test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize warning messages stored in the $errmsg variable using
eval_gettext interpolation. This is explicitly tested for so we
need to skip a portion of a test with test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Submodules changed but not updated" and "Submodule
changes to be committed" messages. This is explicitly tested for so we
need to skip a portion of a test with test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--cached cannot be used with --files" message. Since
this message starts with "--" we have to pass "--" as the first
argument. This works with both GNU gettext 0.18.1 (as expected), and
the gettext(1) on Solaris 10.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize $update_module say and die messages. These messages needed
to be split up to make them translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
By default git submodule update runs a simple checkout on submodules that
are not up-to-date. If the submodules contains modified or untracked
files, the command may exit sanely with an error:
$ git submodule update
error: Your local changes to the following files would be overwritten by
checkout:
file
Please, commit your changes or stash them before you can switch branches.
Aborting
Unable to checkout '1b69c6e55606b48d3284a3a9efe4b58bfb7e8c9e' in
submodule path 'test1'
In order to reset a whole git submodule tree, a user has to run first 'git
submodule foreach --recursive git checkout -f' and then run 'git submodule
update'.
This patch adds a --force option for the update command (only used for
submodules without --rebase or --merge options). It passes the --force
option to git checkout which will throw away the local changes.
Signed-off-by: Nicolas Morey-Chaisemartin <nmorey@kalray.eu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a merge module_list returns conflicting submodules several times
(stage 1,2,3) which caused the submodules to be used multiple times in
git submodule init, sync, update and status command.
There are 5 callers of module_list; they all read (mode, sha1, stage,
path) tuple, and most of them care only about path. As a first level
approximation, it should be Ok (in the sense that it does not make things
worse than it currently is) to filter the duplicate paths from module_list
output, but some callers should change their behaviour when the merge in
the superproject still has conflicts.
Notice the higher-stage entries, and emit only one record from
module_list, but while doing so, mark the entry with "U" (not [0-3]) in
the $stage field and null out the SHA-1 part, as the object name for the
lowest stage does not give any useful information to the caller, and this
way any caller that uses the object name would hopefully barf. Then
update the codepaths for each subcommands this way:
- "update" should not touch the submodule repository, because we do not
know what commit should be checked out yet.
- "status" reports the conflicting submodules as 'U000...000' and does
not recurse into them (we might later want to make it recurse).
- The command called by "foreach" may want to do whatever it wants to do
by noticing the merged status in the superproject itself, so feed the
path to it from module_list as before, but only once per submodule.
- "init" and "sync" are unlikely things to do while the superproject is
still not merged, but as long as a submodule is there in $path, there
is no point skipping it. It might however want to take the merged
status of .gitmodules into account, but that is outside of the scope of
this topic.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the commit to be checked out on "git submodule update" has already been
fetched in the submodule there is no need to run "git fetch" again. Since
"git fetch" recently learned recursion (and the new on-demand mode to
fetch commits recorded in the superproject is enabled by default) this
will happen pretty often, thereby making the unconditional fetch during
"git submodule update" unnecessary.
If the commit is not present in the submodule (e.g. the user disabled the
fetch on-demand mode) the fetch will be run as before.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update" can be run with either the "--merge" or "--rebase"
option, or submodule.<name>.update configuration variable can be set to
"merge" or "rebase, to cause local work to get integrated when updating
the submodule.
When a submodule is newly cloned, however, it does not have a check out
when a rebase or merge is attempted, leading to a failure. For newly
cloned submodules, simply check out the appropriate revision. There is no
local work to integrate with for them.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function resolve_relative_url was not prepared to deal with an
scp-style origin 'user@host:path' in the case where 'path' is only a
single component. Fix this by extending the logic that strips one
path component from the $remoteurl.
Also add tests for both styles of URLs.
Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 55892d23 "git clone" itself checks that the destination path is not
a file but an empty directory if it exists, so there is no need anymore
for module_clone() to check that too.
Two tests have been added to test the behavior of "git submodule add" when
path is a file or a directory (A subshell had to be added to the former
last test to stay in the right directory).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule add -b $branch $repository
fails when HEAD already points to $branch in $repository.
Reported-by: Klaus Ethgen <Klaus@Ethgen.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/maint-submodule-savearg:
submodule: only preserve flags across recursive status/update invocations
submodule: preserve all arguments exactly when recursing
Recursive invocations of submodule update/status preserve all arguments,
so executing
git submodule update --recursive -- foo
attempts to recursively update a submodule named "foo".
Naturally, this fails as one cannot have an infinitely-deep stack of
submodules each containing a submodule named "foo". The desired behavior
is instead to update foo and then recursively update all submodules
inside of foo.
This commit accomplishes that by only saving the flags for use in the
recursive invocation.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shell variables only hold strings, not lists of parameters,
so $orig_args after
orig_args="$@"
fails to remember where each parameter starts and ends, if
some include whitespace. So
git submodule update \
--reference='/var/lib/common objects.git' \
--recursive --init
becomes
git submodule update --reference=/var/lib/common \
objects.git --recursive --init
in the inner repositories. Use "git rev-parse --sq-quote" to
save parameters in quoted form ready for evaluation by the
shell, avoiding this problem.
Helped-By: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a submodule directory has not been filled by "git submodule update"
yet, then "git submodule sync" must still update the super-project's
configuration for submodule.<name>.url.
This situation occurs when switching between branches with a module from
different urls and other branches without the submodule.
Signed-off-by: Andreas Köhler <andi5.py@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule sync" synchronizes the repository URLs
it only updates submodules' .git/config. However, the old
URLs still exist in the super-project's .git/config.
Update the super-project's configuration so that commands
such as "git submodule update" use the URLs from .gitmodules.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `git submodule add' to add the new submodule <path> with `git
add --force'.
I keep my /etc in .git with a .gitignore that contains just
"*". I.e. `git status' will ignore everything that isn't in the tree
already. When I do:
git submodule add <url> hlagh
git-submodule will get as far as checking out the remote repository
into hlagh, but it'll die right afterwards when it fails to add the
new path:
The following paths are ignored by one of your .gitignore files:
hlagh
Use -f if you really want to add them.
fatal: no files added
Failed to add submodule 'hlagh'
Currently there's no way to add a submodule in this situation other
than to remove the ignored path from the .gitignore while I'm at it.
That's silly, when you run `git submodule add' you're explicitly
saying that you want to add something *new* to the repository. Instead
it should just add the path with `git add --force'.
Initially I implemented this by adding new -f and --force options to
`git submodule add'. But if the --force option isn't supplied it'll
get as far as cloning `hlagh', but won't add it.
So the first thing the user has to do is to remove `hlagh' and then
try again with the --force option.
That sucks, it should just add the path to begin with. I can't think
of any usecase where you've gone through the trouble of typing out
`git submodule add ..', but wish to be overriden by a `gitignore'. The
submodule semantics should be more like `git init', not `git add'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/status-ignore-submodules:
Add the option "--ignore-submodules" to "git status"
git submodule: ignore dirty submodules for summary and status
Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h
The summary and status commands only care about submodule commits, so it is
rather pointless that they check for dirty work trees. This saves the time
needed to scan the submodules work tree. Even "git status" profits from these
savings when the status.submodulesummary config option is set, as this lead to
traversing the submodule work trees twice, once for status and once again for
the submodule summary. And if the submodule was just dirty, submodule summary
produced rather meaningless output anyway:
* sub 1234567...1234567 (0):
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a $toplevel variable accessible to `git submodule foreach`, it
contains the absolute path of the top level directory (where
.gitmodules is).
This makes it possible to e.g. read data in .gitmodules from within
foreach commands. I'm using this to configure the branch names I want
to track for each submodule:
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
For a little history: This patch is borne out of my continuing fight
of trying to have Git track the branches of submodules, not just their
commits.
Obviously that's not how they work (they only track commits), but I'm
just interested in being able to do:
git submodule foreach 'git pull'
Of course that won't work because the submodule is in a disconnected
head, so I first have to connect it, but connect it *to what*.
For a while I was happy with this because as fate had it, it just so
happened to do what I meant:
git submodule foreach 'git checkout $(git describe --all --always) && git pull'
But then that broke down, if there's a tag and a branch the tag will
win out, and I can't git pull a branch:
$ git branch -a
* master
remotes/origin/HEAD -> origin/master
remotes/origin/master
$ git tag -l
release-0.0.6
$ git describe --always --all
release-0.0.6
So I figured that I might as well start tracking the branches I want
in .gitmodules itself:
[submodule "yaml-mode"]
path = yaml-mode
url = git://github.com/yoshiki/yaml-mode.git
branch = master
So now I can just do (as stated above):
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
Maybe there's a less painful way to do *that* (I'd love to hear about
it). But regardless of that I think it's a good idea to be able to
know what the top-level is from git submodule foreach.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule inherits variables from the environment it is started in,
expects the internal variables init= and recursive= to have an empty
value, but doesn't initialize them appropriately. Thanks to the
selftests, this can be reproduced through
init=1 make test
recursive=1 make test
With this commit the variables are initialized, and the selftests
succeed even if these variables have some values in the environment.
The bug was discovered through the Debian autobuilders
http://bugs.debian.org/569594
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because log.decorate now shows decorations for --pretty=oneline,
we must explicitly turn it off when scripting. Otherwise,
users with log.decorate set will get cruft like:
$ git stash
Saved working directory and index state WIP on master:
2c1f7f5 (HEAD, master) commit subject
Instead of adding --no-decorate to the log command line,
let's just use the rev-list plumbing interface instead,
which does the right thing.
git-submodule has a similar call. Since it just counts the
commit lines, nothing is broken, but let's switch it, too,
for the sake of consistency and cleanliness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/maint-submodule-status-in-void:
git submodule summary: Handle HEAD as argument when on an unborn branch
submodule summary: do not fail before the first commit
When calling "git submodule summary HEAD" on an unborn branch the output
was empty even when it shouldn't have been ("git submodule summary"
without the HEAD argument prints the expected output since commit
"submodule summary: do not fail before the first commit").
This also fixes "git status" to emit the "Submodule changes to be
committed" section on an unborn branch when used with the
status.submodulesummary config option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/maint-submodule-env:
is_submodule_modified(): clear environment properly
submodules: ensure clean environment when operating in a submodule
shell setup: clear_local_git_env() function
rev-parse: --local-env-vars option
Refactor list of of repo-local env vars
When "git status" collects changes for the index (usually relative to
HEAD), it compares the index with an empty tree when the repository does
not have an initial commit yet. "git submodule summary" is about asking
what submodule changes would be recorded if a commit is made right now,
and should do the same comparison to report all the added submodules,
instead of punting and being silent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule summary" is run without any argument, we default to
compare the state of index with the HEAD, but tried to shift out $1 that
does not exist (and worse yet, we didn't use it).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule used to take care of clearing GIT_DIR whenever it operated
on a submodule index or configuration, but forgot to unset GIT_WORK_TREE
or other repo-local variables. This would lead to failures e.g. when
GIT_WORK_TREE was set.
This only happened in very unusual contexts such as operating on the
main worktree from outside of it, but since "git-gui: set GIT_DIR and
GIT_WORK_TREE after setup" (a9fa11fe5b) such failures could also
be provoked by invoking an external tool such as "git submodule update"
from the Git Gui in a standard setup.
Solve by using the newly introduced clear_local_git_env() shell function
to ensure that all repo-local environment variables are unset.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking "git submodule summary" in an empty repo (which can be
indirectly done by setting status.submodulesummary = true), it currently
emits an error message (via "git diff-index") since HEAD points to an
unborn branch.
This patch adds handling of the HEAD-points-to-unborn-branch special case,
so that "git submodule summary" no longer emits this error message.
The patch also adds a test case that verifies the fix.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the configuration variable status.submodulesummary is not 0 or
false, "git status" shows the submodule summary of the staged submodule
commits. But it did not show the summary of those commits not yet
staged in the supermodule, making it hard to see what will not be
committed.
The output of "submodule summary --for-status" has been changed from
"# Modified submodules:" to "# Submodule changes to be committed:" for
the already staged changes. "# Submodules changed but not updated:" has
been added for changes that will not be committed. This is much clearer
and consistent with the output for regular files.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When <path> is not given, use the "humanish" part of the source repository
instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only show
status for all the submodules in the current repo (which is what is
currently done by 'git submodule status'), but also to show status for
all submodules at all levels (i.e. recursing into nested submodules as
well).
This patch teaches the new --recursive option to the 'git submodule status'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only update
the submodules in the current repo (which is what is currently done by
'git submodule update'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule update'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argument to 'git submodule foreach' already has access to the variables
'$path' (the path to the submodule, relative to the superproject) and '$sha1'
(the submodule commit recorded by the superproject).
This patch adds another variable -- '$name' -- which contains the name of the
submodule, as recorded in the superproject's .gitmodules file.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
