If we get a repo path like "-repo.git", we may try to invoke
"git-upload-pack -repo.git". This is going to fail, since
upload-pack will interpret it as a set of bogus options. But
let's reject this before we even run the sub-program, since
we would not want to allow any mischief with repo names that
actually are real command-line options.
You can still ask for such a path via git-daemon, but there's no
security problem there, because git-daemon enters the repo itself
and then passes "." on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a GIT_PROXY_COMMAND configured, we will run it
with the host/port on the command-line. If a URL contains a
mischievous host like "--foo", we don't know how the proxy
command may handle it. It's likely to break, but it may also
do something dangerous and unwanted (technically it could
even do something useful, but that seems unlikely).
We should err on the side of caution and reject this before
we even run the command.
The hostname check matches the one we do in a similar
circumstance for ssh. The port check is not present for ssh,
but there it's not necessary because the syntax is "-p
<port>", and there's no ambiguity on the parsing side.
It's not clear whether you can actually get a negative port
to the proxy here or not. Doing:
git fetch git://remote:-1234/repo.git
keeps the "-1234" as part of the hostname, with the default
port of 9418. But it's a good idea to keep this check close
to the point of running the command to make it clear that
there's no way to circumvent it (and at worst it serves as a
belt-and-suspenders check).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We reject hostnames that start with a dash because they may
be confused for command-line options. Let's factor out that
notion into a helper function, as we'll use it in more
places. And while it's simple now, it's not clear if some
systems might need more complex logic to handle all cases.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commands like "git fetch" talk with ssh://$rest_of_URL/, the
code splits $rest_of_URL into components like host, port, etc., and
then spawns the underlying "ssh" program by formulating argv[] array
that has:
- the path to ssh command taken from GIT_SSH_COMMAND, etc.
- dashed options like '-batch' (for Tortoise), '-p <port>' as
needed.
- ssh_host, which is supposed to be the hostname parsed out of
$rest_of_URL.
- then the command to be run on the other side, e.g. git
upload-pack.
If the ssh_host ends up getting '-<anything>', the argv[] that is
used to spawn the command becomes something like:
{ "ssh", "-p", "22", "-<anything>", "command", "to", "run", NULL }
which obviously is bogus, but depending on the actual value of
"<anything>", will make "ssh" parse and use it as an option.
Prevent this by forbidding ssh_host that begins with a "-".
Noticed-by: Joern Schneeweisz of Recurity Labs
Reported-by: Brian at GitLab
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to $GIT_ASKPASS or $GIT_PROXY_COMMAND, we also read from
config file first then fall back to $GIT_SSH_COMMAND.
This is useful for selecting different private keys targetting the
same host (e.g. github)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two alternative ways to spell "ssh://" transport have been
deprecated for a long time. The last mention of them has finally
removed from the documentation.
* cn/deprecate-ssh-git-url:
Disown ssh+git and git+ssh
Some people argue that these were silly from the beginning (see
http://thread.gmane.org/gmane.comp.version-control.git/285590/focus=285601
for example), but we have to support them for compatibility.
That doesn't mean we have to show them in the documentation. These
were already left out of the main list, but a reference in the main
manpage was left, so remove that.
Also add a note to discourage their use if anybody goes looking for them
in the source code.
Signed-off-by: Carlos Martín Nieto <cmn@dwim.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace an unsigned char array with struct object_id and express several
hard-coded constants in terms of GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing user-specified programs, we generally always
want to use a shell, for flexibility and consistency. One
big exception is executing $GIT_SSH, which for historical
reasons must not use a shell.
Once upon a time the logic in git_connect looked like:
if (protocol == PROTO_SSH) {
... setup ssh ...
} else {
... setup local connection ...
conn->use_shell = 1;
}
But over time the PROTO_SSH block has grown, and the "local"
block has shrunk so that it contains only conn->use_shell;
it's easy to miss at the end of the large block. Moreover,
PROTO_SSH now also sometimes sets use_shell, when the new
GIT_SSH_COMMAND is used.
Let's just set conn->use_shell when we're setting up the "conn"
struct, and unset it (with a comment) in the historical GIT_SSH
case. This will make the flow easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we "switch" to another local repository to run the server
side of a fetch or push, we must clear the variables in
local_repo_env so that our local $GIT_DIR, etc, do not
pollute the upload-pack or receive-pack that is executing in
the "remote" repository.
We have never done so for ssh connections. For the most
part, nobody has noticed because ssh will not pass unknown
environment variables by default. However, it is not out of
the question for a user to configure ssh to pass along GIT_*
variables using SendEnv/AcceptEnv.
We can demonstrate the problem by using "git -c" on a local
command and seeing its impact on a remote repository. This
config ends up in $GIT_CONFIG_PARAMETERS. In the local case,
the config has no impact, but in the ssh transport, it does
(our test script has a fake ssh that passes through all
environment variables; this isn't normal, but does simulate
one possible setup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
The git_connect function has code to handle plink and tortoiseplink
specially, as they require different command line arguments from
OpenSSH (-P instead of -p for ports; tortoiseplink additionally requires
-batch). However, the match was done by checking for "plink" anywhere
in the string, which led to a GIT_SSH value containing "uplink" being
treated as an invocation of putty's plink.
Improve the check by looking for "plink" or "tortoiseplink" (or those
names suffixed with ".exe") only in the final component of the path.
This has the downside that a program such as "plink-0.63" would no
longer be recognized, but the increased robustness is likely worth it.
Add tests to cover these cases to avoid regressions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code path used in git_connect pushed the majority of the SSH
connection code into an else block, even though the if block returns.
Simplify the code by eliminating the else block, as it is unneeded.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier update to the parser that disects a URL broke an
address, followed by a colon, followed by an empty string (instead
of the port number), e.g. ssh://example.com:/path/to/repo.
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
An earlier update to the parser that disects an address broke an
address, followed by a colon, followed by an empty string (instead
of the port number).
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
Ignore an extra ':' at the end of the hostname in URL's like
"ssh://example.com:/path/to/repo"
The colon is meant to separate a port number from the hostname.
If the port is empty, the colon should be ignored, see RFC 3986.
It had been working for URLs with ssh:// scheme, but was unintentionally
broken in 86ceb3, "allow ssh://user@[2001:db8::1]/repo.git"
Reported-by: Reid Woodbury Jr. <reidw@rawsound.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
The "interpolated-path" option of "git daemon" inserted any string
client declared on the "host=" capability request without checking.
Sanitize and limit %H and %CH to a saner and a valid DNS name.
* jk/daemon-interpolate:
daemon: sanitize incoming virtual hostname
t5570: test git-daemon's --interpolated-path option
git_connect: let user override virtual-host we send to daemon
When git_connect() is called to see how the URL is parsed for
debugging purposes with CONNECT_DIAG_URL set, the variable conn is
leaked. At this point in the codeflow, it only has its memory and
no other resource is associated with it, so it is sufficient to
clean it up by just freeing it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
The "interpolated-path" option of "git daemon" inserted any string
client declared on the "host=" capability request without checking.
Sanitize and limit %H and %CH to a saner and a valid DNS name.
* jk/daemon-interpolate:
daemon: sanitize incoming virtual hostname
t5570: test git-daemon's --interpolated-path option
git_connect: let user override virtual-host we send to daemon
The URL for ssh may have include a username before the hostname,
like ssh://user@host/repo.
When literal IPV6 addresses are used together with a username,
the substring "user@[::1]" must be converted into "user@::1".
Make that conversion visible for the user, and write userandhost
in the diagnostics
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ssh:// syntax was added in 2386d658 (Add first cut at "git
protocol" connect logic., 2005-07-13), it accepted
ssh://user@2001:db8::1/repo.git, which is now legacy.
Over the years the parser was improved to support [] and port numbers,
but the combination of ssh://user@[2001:db8::1]:222/repo.git did
never work.
The only only way to use a user name, a literall IPV6 address and a port
number was ssh://[user@2001:db8::1]:222/repo.git
(Thanks to Christian Taube <lists@hcf.yourweb.de> for reporting this long
standing issue)
New users would use ssh://user@[2001:db8::1]:222/repo.git,
so change the parser to handle it correctly.
Support the old legacy URLs as well, to be backwards compatible,
and avoid regressions for users which upgrade an existing installation
to a later Git version.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of magic string length constants and simply compare the strings
using strcmp(). This makes the intent of the code a bit clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we connect to a git-daemon at a given host and port, we
actually send the string "localhost:9418" to the other side,
which allows it to do virtual-hosting lookups. For testing
and debugging, we'd like to be able to send arbitrary
strings, rather than the hostname we actually connected to.
Using "insteadOf" config does not work for this purpose, as
the hostname determination happens at a very low level,
right before we feed the hostname to our lookup routines.
You could use /etc/hosts or similar to get around this, but
we cannot do that portably from our test suite.
Instead, this patch provides an environment variable that
can be used to send an arbitrary string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote update --prune" to drop many refs has been optimized.
* mh/simplify-repack-without-refs:
sort_string_list(): rename to string_list_sort()
prune_remote(): iterate using for_each_string_list_item()
prune_remote(): rename local variable
repack_without_refs(): make the refnames argument a string_list
prune_remote(): sort delete_refs_list references en masse
prune_remote(): initialize both delete_refs lists in a single loop
prune_remote(): exit early if there are no stale references
The new name is more consistent with the names of other
string_list-related functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It may be impractical to install a wrapper script for GIT_SSH
when additional parameters need to be passed. Provide an alternative
way of specifying a shell command to be run, including command line
arguments, by means of the GIT_SSH_COMMAND environment variable,
which behaves like GIT_SSH but is passed to the shell.
The special circuitry to modify parameters in the case of using
PuTTY's plink/tortoiseplink is activated only when using GIT_SSH;
in the case of using GIT_SSH_COMMAND, it is deliberately left up to
the user to make any required parameters adaptation before calling
the underlying ssh implementation.
Signed-off-by: Thomas Quinot <thomas@quinot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/more-uses-of-skip-prefix:
pack-write: simplify index_pack_lockfile using skip_prefix() and xstrfmt()
connect: simplify check_ref() using skip_prefix() and starts_with()
Both callers of check_ref() pass in NUL-terminated strings for name.
Remove the len parameter and then use skip_prefix() and starts_with()
instead of memcmp() to check if it starts with certain strings. This
gets rid of several magic string length constants and a strlen() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper function for initializing those struct child_process
variables for which the macro CHILD_PROCESS_INIT can't be used.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use xmemdupz() to allocate the memory, copy the data and make sure to
NUL-terminate the result, all in one step. The resulting code is
shorter, doesn't contain the constants 1 and '\0', and avoids
duplicating function parameters.
For blame, the last copied byte (o->file.ptr[o->file.size]) is always
set to NUL by fake_working_tree_commit() or read_sha1_file(), so no
information is lost by the conversion to using xmemdupz().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with a magic number, like:
if (starts_with(foo, "bar"))
foo += 3;
This is easy to get wrong, since you have to count the
prefix string yourself, and there's no compiler check if the
string changes. We can use skip_prefix to avoid the magic
numbers here.
Note that some of these conversions could be much shorter.
For example:
if (starts_with(arg, "--foo=")) {
bar = arg + 6;
continue;
}
could become:
if (skip_prefix(arg, "--foo=", &bar))
continue;
However, I have left it as:
if (skip_prefix(arg, "--foo=", &v)) {
bar = v;
continue;
}
to visually match nearby cases which need to actually
process the string. Like:
if (skip_prefix(arg, "--foo=", &v)) {
bar = atoi(v);
continue;
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids magic numbers when we allocate fixed-size argv
arrays, and makes it more obvious that we are not
overflowing.
It is also the first step to fixing a memory leak. When
git_connect returns a child_process struct, the argv array
in the struct is dynamically allocated, but the individual
strings are not (they are either owned elsewhere, or are
freed). Later, in finish_connect, we free the array but
leave the strings alone.
This works for the child_process created by git_connect, but
if we use transport_take_over, we may also end up with a
child_process created by transport-helper's get_helper.
In that case, the strings are freshly allocated, and we
would want to free them. However, we have no idea in
finish_connect which type we have.
By consistently using run-command's internal argv-array, we
do not have to worry about this issue at all; finish_command
takes care of it for us, and we can drop our manual free
entirely.
Note that this actually makes the get_helper leak slightly
worse; now we are leaking both the strings and the array.
But when we adjust it in a future patch, that leak will go
away entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
