The atomic push over smart HTTP transport did not work, which has
been corrected.
* bc/smart-http-atomic-push:
remote-curl: pass on atomic capability to remote side
If a directory in $GIT_DIR is overridden when $GIT_COMMON_DIR is set,
then usually all paths within that directory are overridden as well.
There are a couple of exceptions, though, and two of them, namely
'refs/rewritten' and 'logs/HEAD' are not mentioned in
'gitrepository-layout'. Document them as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --[no-]progress option to git multi-pack-index.
Pass the MIDX_PROGRESS flag to the subcommand functions
when progress should be displayed by multi-pack-index.
The progress feature was added to 'verify' in 144d703
("multi-pack-index: report progress during 'verify'", 2018-09-13)
but some subcommands were not updated to display progress, and
the ability to opt-out was overlooked.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing wording gives an impression that it only gives the
contents of the $GIT_DIR/rebase-apply/patch file, i.e. the patch
proper, but the option actually emits the entire e-mail message
being processed (iow, one of the output files from "git mailsplit").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
The builtin/notes.c::copy() function is prepared to handle either
one or two arguments given from the command line; when one argument
is given, to-obj defaults to HEAD.
bbb1b8a3 ("notes: check number of parameters to "git notes copy"",
2010-06-28) tried to make sure "git notes copy" (with *no* other
argument) does not dereference NULL by checking the number of
parameters, but it incorrectly insisted that we need two arguments,
instead of either one or two. This disabled the defaulting to-obj
to HEAD.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing more than one reference with the --atomic option, the
server is supposed to perform a single atomic transaction to update the
references, leaving them either all to succeed or all to fail. This
works fine when pushing locally or over SSH, but when pushing over HTTP,
we fail to pass the atomic capability to the remote side. In fact, we
have not reported this capability to any remote helpers during the life
of the feature.
Now normally, things happen to work nevertheless, since we actually
check for most types of failures, such as non-fast-forward updates, on
the client side, and just abort the entire attempt. However, if the
server side reports a problem, such as the inability to lock a ref, the
transaction isn't atomic, because we haven't passed the appropriate
capability over and the remote side has no way of knowing that we wanted
atomic behavior.
Fix this by passing the option from the transport code through to remote
helpers, and from the HTTP remote helper down to send-pack. With this
change, we can detect if the server side rejects the push and report
back appropriately. Note the difference in the messages: the remote
side reports "atomic transaction failed", while our own checking rejects
pushes with the message "atomic push failed".
Document the atomic option in the remote helper documentation, so other
implementers can implement it if they like.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when format-patch generated a cover letter, only the body would
be populated with a branch's description while the subject would be
populated with placeholder text. However, users may want to have the
subject of their cover letter automatically populated in the same way.
Teach format-patch to accept the `--cover-from-description` option and
corresponding `format.coverFromDescription` config, allowing users to
populate different parts of the cover letter (including the subject
now).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 output, when sending them to files in a designated
directory, can populate the directory with too many files; a
mechanism is introduced to set the maximum number of files and
discard further logs when the maximum is reached.
* js/trace2-cap-max-output-files:
trace2: write discard message to sentinel files
trace2: discard new traces if target directory has too many files
docs: clarify trace2 version invariants
docs: mention trace2 target-dir mode in git-config
Updates to fast-import/export.
* en/fast-imexport-nested-tags:
fast-export: handle nested tags
t9350: add tests for tags of things other than a commit
fast-export: allow user to request tags be marked with --mark-tags
fast-export: add support for --import-marks-if-exists
fast-import: add support for new 'alias' command
fast-import: allow tags to be identified by mark labels
fast-import: fix handling of deleted tags
fast-export: fix exporting a tag and nothing else
"git fetch --jobs=<n>" allowed <n> parallel jobs when fetching
submodules, but this did not apply to "git fetch --multiple" that
fetches from multiple remote repositories. It now does.
* js/fetch-jobs:
fetch: let --jobs=<n> parallelize --multiple, too
'git format-patch -o <outdir>' did an equivalent of 'mkdir <outdir>'
not 'mkdir -p <outdir>', which is being corrected.
Avoid the usage of 'adjust_shared_perm' on the leading directories which
may have security implications. Achieved by temporarily disabling of
'config.sharedRepository' like 'git init' does.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing documentation on object walks seems to be primarily intended
as a reference for those already familiar with the procedure. This
tutorial attempts to give an entry-level guide to a couple of bare-bones
object walks so that new Git contributors can learn the concepts
without having to wade through options parsing or special casing.
The target audience is a Git contributor who is just getting started
with the concept of object walking. The goal is to prepare this
contributor to be able to understand and modify existing commands which
perform revision walks more easily, although it will also prepare
contributors to create new commands which perform walks.
The tutorial covers a basic overview of the structs involved during
object walk, setting up a basic commit walk, setting up a basic
all-object walk, and adding some configuration changes to both walk
types. It intentionally does not cover how to create new commands or
search for options from the command line or gitconfigs.
There is an associated patchset at
https://github.com/nasamuffin/git/tree/revwalk that contains a reference
implementation of the code generated by this tutorial.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original phrasing of this paragraph made at least one person stumble
over the word "from" (thinking that it was a typo and "from" was
intended), and other readers chimed in, agreeing that it was confusing:
https://public-inbox.org/git/0102016b8d597569-c1f6cfdc-cb45-4428-8737-cb1bc30655d8-000000@eu-west-1.amazonses.com/#t
Let's rewrite that paragraph for clarity.
Inspired-by-a-patch-by: Catalin Criste <cris_linu_w@yahoo.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few simplification and bugfixes to PCRE interface.
* ab/pcre-jit-fixes:
grep: under --debug, show whether PCRE JIT is enabled
grep: do not enter PCRE2_UTF mode on fixed matching
grep: stess test PCRE v2 on invalid UTF-8 data
grep: create a "is_fixed" member in "grep_pat"
grep: consistently use "p->fixed" in compile_regexp()
grep: stop using a custom JIT stack with PCRE v1
grep: stop "using" a custom JIT stack with PCRE v2
grep: remove overly paranoid BUG(...) code
grep: use PCRE v2 for optimized fixed-string search
grep: remove the kwset optimization
grep: drop support for \0 in --fixed-strings <pattern>
grep: make the behavior for NUL-byte in patterns sane
grep tests: move binary pattern tests into their own file
grep tests: move "grep binary" alongside the rest
grep: inline the return value of a function call used only once
t4210: skip more command-line encoding tests on MinGW
grep: don't use PCRE2?_UTF8 with "log --encoding=<non-utf8>"
log tests: test regex backends in "--encode=<enc>" tests
"git clean" fixes.
* en/clean-nested-with-ignored:
dir: special case check for the possibility that pathspec is NULL
clean: fix theoretical path corruption
clean: rewrap overly long line
clean: avoid removing untracked files in a nested git repository
clean: disambiguate the definition of -d
git-clean.txt: do not claim we will delete files with -n/--dry-run
dir: add commentary explaining match_pathspec_item's return value
dir: if our pathspec might match files under a dir, recurse into it
dir: make the DO_MATCH_SUBMODULE code reusable for a non-submodule case
dir: also check directories for matching pathspecs
dir: fix off-by-one error in match_pathspec_item
dir: fix typo in comment
t7300: add testcases showing failure to clean specified pathspecs
The markup used in user-manual has been updated to work better with
asciidoctor.
* ma/user-manual-markup-update:
user-manual.txt: render ASCII art correctly under Asciidoctor
asciidoctor-extensions.rb: handle "book" doctype in linkgit
user-manual.txt: change header notation
user-manual.txt: add missing section label
Start using DocBook 5 (instead of DocBook 4.5) as Asciidoctor 2.0
no longer works with the older one.
* bc/doc-use-docbook-5:
Documentation: fix build with Asciidoctor 2
Update support for Asciidoctor documentation toolchain.
* ma/asciidoctor-refmiscinfo:
doc-diff: replace --cut-header-footer with --cut-footer
asciidoctor-extensions: provide `<refmiscinfo/>`
Doc/Makefile: give mansource/-version/-manual attributes
The synopsis section in git-rev-list.txt has grown to be a huge list
that probably needs its own synopsis. Since the list is huge, users may
be given the false impression that the list is complete, however it is
not. It is missing many of the available options.
Since the list of options in the synopsis is not only annoying but
actively harmful, replace it with `[<options>]` so users know to
explicitly look through the documentation for further information.
While we're at it, update the optional path notation so that it is more
modern.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, `--jobs=<n>` only parallelizes submodule fetches/clones, not
`--multiple` fetches, which is unintuitive, given that the option's name
does not say anything about submodules in particular.
Let's change that. With this patch, also fetches from multiple remotes
are parallelized.
For backwards-compatibility (and to prepare for a use case where
submodule and multiple-remote fetches may need different parallelization
limits), the config setting `submodule.fetchJobs` still only controls
the submodule part of `git fetch`, while the newly-introduced setting
`fetch.parallel` controls both (but can be overridden for submodules
with `submodule.fetchJobs`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "discard" event type for trace2 event destinations. When the
trace2 file count check creates a sentinel file, it will include the
normal trace2 output in the sentinel, along with this new discard
event.
Writing this message into the sentinel file is useful for tracking how
often the file count check triggers in practice.
Bump up the event format version since we've added a new event type.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2 can write files into a target directory. With heavy usage, this
directory can fill up with files, causing difficulty for
trace-processing systems.
This patch adds a config option (trace2.maxFiles) to set a maximum
number of files that trace2 will write to a target directory. The
following behavior is enabled when the maxFiles is set to a positive
integer:
When trace2 would write a file to a target directory, first check
whether or not the traces should be discarded. Traces should be
discarded if:
* there is a sentinel file declaring that there are too many files
* OR, the number of files exceeds trace2.maxFiles.
In the latter case, we create a sentinel file named git-trace2-discard
to speed up future checks.
The assumption is that a separate trace-processing system is dealing
with the generated traces; once it processes and removes the sentinel
file, it should be safe to generate new trace files again.
The default value for trace2.maxFiles is zero, which disables the file
count check.
The config can also be overridden with a new environment variable:
GIT_TRACE2_MAX_FILES.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it explicit that we always want trace2 "version" events to be the
first event of any trace session. Also list the changes that would or
would not cause the EVENT format version field to be incremented.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the description of trace2's target-directory behavior into the
shared trace2-target-values file so that it is included in both the
git-config and api-trace2 docs. Leave the SID discussion only in
api-trace2 since it's a technical detail.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, --mark-tags, which will output mark identifiers with
each tag object. This improves the incremental export story with
--export-marks since it will allow us to record that annotated tags have
been exported, and it is also needed as a step towards supporting nested
tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export and fast-import have nice --import-marks flags which allow
for incremental migrations. However, if there is a mark in
fast-export's file of marks without a corresponding mark in the one for
fast-import, then we run the risk that fast-export tries to send new
objects relative to the mark it knows which fast-import does not,
causing fast-import to fail.
This arises in practice when there is a filter of some sort running
between the fast-export and fast-import processes which prunes some
commits programmatically. Provide such a filter with the ability to
alias pruned commits to their most recent non-pruned ancestor.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark identifiers are used in fast-export and fast-import to provide a
label to refer to earlier content. Blobs are given labels because they
need to be referenced in the commits where they first appear with a
given filename, and commits are given labels because they can be the
parents of other commits. Tags were never given labels, probably
because they were viewed as unnecessary, but that presents two problems:
1. It leaves us without a way of referring to previous tags if we
want to create a tag of a tag (or higher nestings).
2. It leaves us with no way of recording that a tag has already been
imported when using --export-marks and --import-marks.
Fix these problems by allowing an optional mark label for tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A configuration variable tells "git fetch" to write the commit
graph after finishing.
* ds/commit-graph-on-fetch:
fetch: add fetch.writeCommitGraph config setting
The internal code originally invented for ".gitignore" processing
got reshuffled and renamed to make it less tied to "excluding" and
stress more that it is about "matching", as it has been reused for
things like sparse checkout specification that want to check if a
path is "included".
* ds/include-exclude:
unpack-trees: rename 'is_excluded_from_list()'
treewide: rename 'exclude' methods to 'pattern'
treewide: rename 'EXCL_FLAG_' to 'PATTERN_FLAG_'
treewide: rename 'struct exclude_list' to 'struct pattern_list'
treewide: rename 'struct exclude' to 'struct path_pattern'
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
Start discouraging the use of "git filter-branch".
* en/filter-branch-deprecation:
t9902: use a non-deprecated command for testing
Recommend git-filter-repo instead of git-filter-branch
t6006: simplify, fix, and optimize empty message test
The documentation and tests for "git format-patch" have been
cleaned up.
* dl/format-patch-doc-test-cleanup:
config/format.txt: specify default value of format.coverLetter
Doc: add more detail for git-format-patch
t4014: stop losing return codes of git commands
t4014: remove confusing pipe in check_threading()
t4014: use test_line_count() where possible
t4014: let sed open its own files
t4014: drop redirections to /dev/null
t4014: use indentable here-docs
t4014: remove spaces after redirect operators
t4014: use sq for test case names
t4014: move closing sq onto its own line
t4014: s/expected/expect/
t4014: drop unnecessary blank lines from test cases
This commit is similar to 379805051d ("Documentation: render revisions
correctly under Asciidoctor", 2018-05-06) and is a no-op with AsciiDoc.
When creating a literal block from an indented block without any sort of
delimiters, Asciidoctor strips off all leading whitespace, resulting in
a misrendered ASCII drawing. Use an explicit literal block to indicate
to Asciidoctor that we want to keep the leading whitespace. Drop the
common indentation for all lines to make this a no-op with AsciiDoc.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual.txt is the only file we process using the "book" doctype.
When we use AsciiDoc, user-manual.conf ensures that the linkgit macro
expands into something like
<ulink url="git-foo.html">git-foo(1)</ulink>
in user-manual.xml, which we then process into a clickable link, both in
user-manual.html and user-manual.pdf. With Asciidoctor,
user-manual.conf is ignored (this is expected) and our
Asciidoctor-specific implementation of linkgit kicks in:
<citerefentry>
<refentrytitle>git-foo</refentrytitle><manvolnum>1</manvolnum>
</citerefentry>
This eventually renders as "git-foo(1)", which is not bad, but it
doesn't turn into a link.
Teach our Asciidoctor-specific implementation of the linkgit macro that
if the doctype is "book", we should emit <ulink .../> just like we do
with AsciiDoc. While we're doing this, future-proof by supporting a
"prefix". The implementation in user-manual.conf doesn't support this,
and we don't need this for now because user-manual.txt is the only file
we process this way (and it's immediately in Documentation/).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When AsciiDoc processes user-manual.txt, it generates a book containing
chapters containing sections. So for example, we have chapter 6,
"Advanced branch management", which contains four relatively short
sections, 6.1-6.4. Asciidoctor generates a book containing *parts*
containing *chapters* instead. So part 6, "Advanced branch management"
contains four short chapters, 1-4. This looks a bit odd.
To make AsciiDoc (8.6.10) and Asciidoctor (1.5.5) handle these the same,
change from indicating chapters like so:
[[foobar]]
Foobar
======
to doing it like so:
[[foobar]]
== Foobar
Same thing for sections (line of dashes to ===), subsections (line of
tildes to ====) and subsubsections (line of carets to =====). Mark the
appendices with "[appendix]", which both AsciiDoc and Asciidoctor
understand. This means we need to drop the "Appendix X: " from their
titles, or those "Appendix X: " would be included literally in the name
of the appendix.
This commit is a no-op for AsciiDoc: The generated user-manual.xml is
identical before and after this patch. Asciidoctor now creates the same
chapter-section-subsection structure as AsciiDoc.
Changing the book title at the start of the document to similarly use
"=" instead of a line of equal signs makes no difference with any of the
engines, but let's do that change anyway for consistency.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We provide a label for each chapter and section except for the "Pitfalls
with submodules" section. Since we're doing it everywhere else, let's do
it here, too.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the pull command instead of push is more accurate when giving
instructions on placing the psuh command in alphabetical order.
Signed-off-by: Pedro Sousa <pedroteosousa@gmail.com>
Acked-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --[no-]progress to git commit-graph write and verify.
The progress feature was introduced in 7b0f229
("commit-graph write: add progress output", 2018-09-17) but
the ability to opt-out was overlooked.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
A new "pre-merge-commit" hook has been introduced.
* js/pre-merge-commit-hook:
merge: --no-verify to bypass pre-merge-commit hook
git-merge: honor pre-merge-commit hook
merge: do no-verify like commit
t7503: verify proper hook execution
"git rebase --rebase-merges" learned to drive different merge
strategies and pass strategy specific options to them.
* js/rebase-r-strategy:
t3427: accelerate this test by using fast-export and fast-import
rebase -r: do not (re-)generate root commits with `--root` *and* `--onto`
t3418: test `rebase -r` with merge strategies
t/lib-rebase: prepare for testing `git rebase --rebase-merges`
rebase -r: support merge strategies other than `recursive`
t3427: fix another incorrect assumption
t3427: accommodate for the `rebase --merge` backend having been replaced
t3427: fix erroneous assumption
t3427: condense the unnecessarily repetitive test cases into three
t3427: move the `filter-branch` invocation into the `setup` case
t3427: simplify the `setup` test case significantly
t3427: add a clarifying comment
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
Users expect files in a nested git repository to be left alone unless
sufficiently forced (with two -f's). Unfortunately, in certain
circumstances, git would delete both tracked (and possibly dirty) files
and untracked files within a nested repository. To explain how this
happens, let's contrast a couple cases. First, take the following
example setup (which assumes we are already within a git repo):
git init nested
cd nested
>tracked
git add tracked
git commit -m init
>untracked
cd ..
In this setup, everything works as expected; running 'git clean -fd'
will result in fill_directory() returning the following paths:
nested/
nested/tracked
nested/untracked
and then correct_untracked_entries() would notice this can be compressed
to
nested/
and then since "nested/" is a directory, we would call
remove_dirs("nested/", ...), which would
check is_nonbare_repository_dir() and then decide to skip it.
However, if someone also creates an ignored file:
>nested/ignored
then running 'git clean -fd' would result in fill_directory() returning
the same paths:
nested/
nested/tracked
nested/untracked
but correct_untracked_entries() will notice that we had ignored entries
under nested/ and thus simplify this list to
nested/tracked
nested/untracked
Since these are not directories, we do not call remove_dirs() which was
the only place that had the is_nonbare_repository_dir() safety check --
resulting in us deleting both the untracked file and the tracked (and
possibly dirty) file.
One possible fix for this issue would be walking the parent directories
of each path and checking if they represent nonbare repositories, but
that would be wasteful. Even if we added caching of some sort, it's
still a waste because we should have been able to check that "nested/"
represented a nonbare repository before even descending into it in the
first place. Add a DIR_SKIP_NESTED_GIT flag to dir_struct.flags and use
it to prevent fill_directory() and friends from descending into nested
git repos.
With this change, we also modify two regression tests added in commit
91479b9c72 ("t7300: add tests to document behavior of clean and nested
git", 2015-06-15). That commit, nor its series, nor the six previous
iterations of that series on the mailing list discussed why those tests
coded the expectation they did. In fact, it appears their purpose was
simply to test _existing_ behavior to make sure that the performance
changes didn't change the behavior. However, these two tests directly
contradicted the manpage's claims that two -f's were required to delete
files/directories under a nested git repository. While one could argue
that the user gave an explicit path which matched files/directories that
were within a nested repository, there's a slippery slope that becomes
very difficult for users to understand once you go down that route (e.g.
what if they specified "git clean -f -d '*.c'"?) It would also be hard
to explain what the exact behavior was; avoid such problems by making it
really simple.
Also, clean up some grammar errors describing this functionality in the
git-clean manpage.
Finally, there are still a couple bugs with -ffd not cleaning out enough
(e.g. missing the nested .git) and with -ffdX possibly cleaning out the
wrong files (paying attention to outer .gitignore instead of inner).
This patch does not address these cases at all (and does not change the
behavior relative to those flags), it only fixes the handling when given
a single -f. See
https://public-inbox.org/git/20190905212043.GC32087@szeder.dev/ for more
discussion of the -ffd[X?] bugs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -d flag pre-dated git-clean's ability to have paths specified. As
such, the default for git-clean was to only remove untracked files in
the current directory, and -d existed to allow it to recurse into
subdirectories.
The interaction of paths and the -d option appears to not have been
carefully considered, as evidenced by numerous bugs and a dearth of
tests covering such pairings in the testsuite. The definition turns out
to be important, so let's look at some of the various ways one could
interpret the -d option:
A) Without -d, only look in subdirectories which contain tracked
files under them; with -d, also look in subdirectories which
are untracked for files to clean.
B) Without specified paths from the user for us to delete, we need to
have some kind of default, so...without -d, only look in
subdirectories which contain tracked files under them; with -d,
also look in subdirectories which are untracked for files to clean.
The important distinction here is that choice B says that the presence
or absence of '-d' is irrelevant if paths are specified. The logic
behind option B is that if a user explicitly asked us to clean a
specified pathspec, then we should clean anything that matches that
pathspec. Some examples may clarify. Should
git clean -f untracked_dir/file
remove untracked_dir/file or not? It seems crazy not to, but a strict
reading of option A says it shouldn't be removed. How about
git clean -f untracked_dir/file1 tracked_dir/file2
or
git clean -f untracked_dir_1/file1 untracked_dir_2/file2
? Should it remove either or both of these files? Should it require
multiple runs to remove both the files listed? (If this sounds like a
crazy question to even ask, see the commit message of "t7300: Add some
testcases showing failure to clean specified pathspecs" added earlier in
this patch series.) What if -ffd were used instead of -f -- should that
allow these to be removed? Should it take multiple invocations with
-ffd? What if a glob (such as '*tracked*') were used instead of
spelling out the directory names? What if the filenames involved globs,
such as
git clean -f '*.o'
or
git clean -f '*/*.o'
?
The current documentation actually suggests a definition that is
slightly different than choice A, and the implementation prior to this
series provided something radically different than either choices A or
B. (The implementation, though, was clearly just buggy). There may be
other choices as well. However, for almost any given choice of
definition for -d that I can think of, some of the examples above will
appear buggy to the user. The only case that doesn't have negative
surprises is choice B: treat a user-specified path as a request to clean
all untracked files which match that path specification, including
recursing into any untracked directories.
Change the documentation and basic implementation to use this
definition.
There were two regression tests that indirectly depended on the current
implementation, but neither was about subdirectory handling. These two
tests were introduced in commit 5b7570cfb4 ("git-clean: add tests for
relative path", 2008-03-07) which was solely created to add coverage for
the changes in commit fb328947c8e ("git-clean: correct printing relative
path", 2008-03-07). Both tests specified a directory that happened to
have an untracked subdirectory, but both were only checking that the
resulting printout of a file that was removed was shown with a relative
path. Update these tests appropriately.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears that the wrong option got included in the list of what will
cause git-clean to actually take action. Correct the list.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Replace "SHA-1" by "object name", the modern name for hashes.
- Correct a few grammar weaknesses.
- Do not accidentally format a phrase in teletype font where quotes are
intended.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff, log doc: say "patch text" instead of "patches"
A poster on Stackoverflow was confused that the documentation of git-log
promised to generate "patches" or "patch files" with -p, but there were
none to be found. Rewrite the corresponding paragraph to talk about
"patch text" to avoid the confusion.
Shorten the language to say "X does Y" in place of "X does not Z, but Y".
Cross-reference the referred-to commands like the rest of the file does.
Enumerate git-show because it includes the description as well.
Mention porcelain commands before plumbing commands because I guess that
the paragraph is read more frequently in their context.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous commit, AsciiDoc and Asciidoctor render the manpage
headers identically, so we no longer need the "cut the header" part of
our `--cut-header-footer` option. We do still need the "cut the footer"
part, though. The previous commits improved the rendering of the footer
in Asciidoctor by quite a bit, but the two programs still disagree on
how to format the date in the footer: 01/01/1970 vs 1970-01-01.
We could keep using `--cut-header-footer`, but it would be nice if we
had a slightly smaller hammer `--cut-footer` that would be less likely
to hide regressions. Rather than simply adding such an option, let's
also drop `--cut-header-footer`, i.e., rework it to lose the "header"
part of its name and functionality.
`--cut-header-footer` is just a developer tool and it probably has no
more than a handful of users, so we can afford to be aggressive.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can be seen from the previous commit, there are three attributes that
we provide to AsciiDoc through asciidoc.conf. Asciidoctor ignores that
file. After that patch, newer versions of Asciidoctor pick up the
`manmanual` and `mansource` attributes as we invoke `asciidoctor`, but
they don't pick up `manversion`. ([1] says: "Not used by Asciidoctor.")
Older versions (<1.5.7) don't handle these attributes at all. As a
result, we are missing one or three `<refmiscinfo/>` tags in each
xml-file produced when we build with Asciidoctor.
Because of this, xmlto doesn't include the Git version number in the
rendered manpages. And in particular, with versions <1.5.7, the manpage
footers instead contain the fairly ugly "[FIXME: source]".
That Asciidoctor ignores asciidoc.conf is nothing new. This is why we
implement the `linkgit:` macro in asciidoc.conf *and* in
asciidoctor-extensions.rb. Follow suit and provide these tags in
asciidoctor-extensions.rb, using a "postprocessor" extension where we
just search and replace in the XML, treated as text.
We may consider a few alternatives:
* Inject these lines into the xml-files from the *Makefile*, e.g.,
using `sed`. That would reduce repetition, but it feels wrong to
impose another step and another risk on the AsciiDoc-processing only
to benefit the Asciidoctor-one.
* I tried providing a "docinfo processor" to inject these tags, but
could not figure out how to "merge" the two <refmeta/> sections that
resulted. To avoid xmlto barfing on the result, I needed to use
`xmlto --skip-validation ...`, which seems unfortunate.
Let's instead inject the missing tags using a postprocessor. We'll make
it fairly obvious that we aim to inject the exact same three lines of
`<refmiscinfo/>` that asciidoc.conf provides. We inject them in
*post*-processing so we need to do the variable expansion ourselves. We
do introduce the bug that asciidoc.conf already has in that we won't do
any escaping, e.g., of funky versions like "some v <2.25, >2.20".
The postprocessor we add here works on the XML as raw text and doesn't
really use the full potential of XML to do a more structured injection.
This is actually precisely what the Asciidoctor User Manual does in its
postprocessor example [2]. I looked into two other approaches:
1. The nokogiri library is apparently the "modern" way of doing XML
in ruby. I got it working fairly easily:
require 'nokogiri'
doc = Nokogiri::XML(output)
doc.search("refmeta").each { |n| n.add_child(new_tags) }
output = doc.to_xml
However, this adds another dependency (e.g., the "ruby-nokogiri"
package on Ubuntu). Using Asciidoctor is not our default, but it
will probably need to become so soon. Let's avoid adding a
dependency just so that we can say "search...add_child" rather than
"sub(regex...)".
2. The older REXML is apparently always(?) bundled with ruby, but I
couldn't even parse the original document:
require 'rexml/document'
doc = REXML::Document.new(output)
...
The error was "no implicit conversion of nil into String" and I
stopped there.
I don't think it's unlikely that doing a plain old search-and-replace
will work just as fine or better compared to parsing XML and worrying
about libraries and library versions.
[1] https://asciidoctor.org/docs/user-manual/#builtin-attributes
[2] https://asciidoctor.org/docs/user-manual/#postprocessor-example
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than hardcoding "Git Manual" and "Git" as the manual and source
in asciidoc.conf, provide them as attributes `manmanual` and
`mansource`. Rename the `git_version` attribute to `manversion`.
These new attribute names are not arbitrary, see, e.g., [1].
For AsciiDoc (8.6.10) and Asciidoctor <1.5.7, this is a no-op. Starting
with Asciidoctor 1.5.7, `manmanual` and `mansource` actually end up in
the xml-files and eventually in the rendered manpages. In particular,
the manpage headers now render just as with AsciiDoc.
No versions of Asciidoctor pick up the `manversion` [2], and older
versions don't pick up any of these attributes. -- We'll fix that with a
bit of a hack in the next commit.
[1] https://asciidoctor.org/docs/user-manual/#man-pages
[2] Note how [1] says "Not used by Asciidoctor".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b57e8119e6 (submodule: teach set-branch subcommand, 2019-02-08), the
`set-branch` subcommand was added for submodules. When the documentation
was written, the syntax for a "index term" in AsciiDoc was
accidentally used. This caused the documentation to be rendered as
set-branch -d|--default)|(-b|--branch <branch> [--] <path>
instead of
set-branch ((-d|--default)|(-b|--branch <branch>)) [--] <path>
In addition to this, the original documentation was possibly confusing
as it made it seem as if the `-b` option didn't accept a `<branch>`
argument.
Break `--default` and `--branch` into their own separate invocations to
make it obvious that these options are mutually exclusive. Also, this
removes the surrounding parentheses so that the "index term" syntax is
not triggered.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation toolchain has traditionally been built around DocBook
4.5. This version of DocBook is the last DTD-based version of DocBook.
In 2009, DocBook 5 was introduced using namespaces and its syntax is
expressed in RELAX NG, which is more expressive and allows a wider
variety of syntax forms.
Asciidoctor, one of the alternatives for building our documentation,
moved support for DocBook 4.5 out of core in its recent 2.0 release and
now only supports DocBook 5 in the main release. The DocBoook 4.5
converter is still available as a separate component, but this is not
available in most distro packages. This would not be a problem but for
the fact that we use xmlto, which is still stuck in the DocBook 4.5 era.
xmlto performs DTD validation as part of the build process. This is not
problematic for DocBook 4.5, which has a valid DTD, but it clearly
cannot work for DocBook 5, since no DTD can adequately express its full
syntax. In addition, even if xmlto did support RELAX NG validation,
that wouldn't be sufficient because it uses the libxml2-based xmllint to
do so, which has known problems with validating interleaves in RELAX NG.
Fortunately, there's an easy way forward: ask Asciidoctor to use its
DocBook 5 backend and tell xmlto to skip validation. Asciidoctor has
supported DocBook 5 since v0.1.4 in 2013 and xmlto has supported
skipping validation for probably longer than that.
We also need to teach xmlto how to use the namespaced DocBook XSLT
stylesheets instead of the non-namespaced ones it usually uses.
Normally these stylesheets are interchangeable, but the non-namespaced
ones have a bug that causes them not to strip whitespace automatically
from certain elements when namespaces are in use. This results in
additional whitespace at the beginning of list elements, which is
jarring and unsightly.
We can do this by passing a custom stylesheet with the -x option that
simply imports the namespaced stylesheets via a URL. Any system with
support for XML catalogs will automatically look this URL up and
reference a local copy instead without us having to know where this
local copy is located. We know that anyone using xmlto will already
have catalogs set up properly since the DocBook 4.5 DTD used during
validation is also looked up via catalogs. All major Linux
distributions distribute the necessary stylesheets and have built-in
catalog support, and Homebrew does as well, albeit with a requirement to
set an environment variable to enable catalog support.
On the off chance that someone lacks support for catalogs, it is
possible for xmlto (via xmllint) to download the stylesheets from the
URLs in question, although this will likely perform poorly enough to
attract attention. People still have the option of using the prebuilt
documentation that we ship, so happily this should not be an impediment.
Finally, we need to filter out some messages from other stylesheets that
occur when invoking dblatex in the CI job. This tool strips namespaces
much like the unnamespaced DocBook stylesheets and prints similar
messages. If we permit these messages to be printed to standard error,
our documentation CI job will fail because we check standard error for
unexpected output. Due to dblatex's reliance on Python 2, we may need
to revisit its use in the future, in which case this problem may go
away, but this can be delayed until a future patch.
The final message we filter is due to libxslt on modern Debian and
Ubuntu. The patch which they use to implement reproducible ID
generation also prints messages about the ID generation. While this
doesn't affect our current CI images since they use Ubuntu 16.04 which
lacks this patch, if we upgrade to Ubuntu 18.04 or a modern Debian,
these messages will appear and, like the above messages, cause a CI
failure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a closing backtick that was placed one character too soon.
Signed-off-by: Cameron Steffen <cam.steffen94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" learned "--set-upstream" option to help those who first
clone from their private fork they intend to push to, add the true
upstream via "git remote add" and then "git fetch" from it.
* cb/fetch-set-upstream:
pull, fetch: add --set-upstream option
We promoted the "indent heuristics" that decides where to split
diff hunks from experimental to the default a few years ago, but
some stale documentation still marked it as experimental, which has
been corrected.
* sg/diff-indent-heuristic-non-experimental:
diff: 'diff.indentHeuristic' is no longer experimental
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
The command line parser learned "--end-of-options" notation; the
standard convention for scripters to have hardcoded set of options
first on the command line, and force the command to treat end-user
input as non-options, has been to use "--" as the delimiter, but
that would not work for commands that use "--" as a delimiter
between revs and pathspec.
* jk/eoo:
gitcli: document --end-of-options
parse-options: allow --end-of-options as a synonym for "--"
revision: allow --end-of-options to end option parsing
This paragraph uses a lot of +pluses+ to render text as monospace. That
works fine with AsciiDoc (8.6.10), and almost fine with Asciidoctor
(1.5.5), which renders the third of these literally ("+$projname+"). The
reason seems to be that Asciidoctor trips on the lone plus a bit
earlier, even though it is escaped.
Switch +$projname+ to `$projname`, and change the next, similar instance
too (+$projname/+), because otherwise, we'd trip on /that one/ instead.
If we would stop there, we would now start falling over on the escaped
plus ('\+') mentioned earlier, rendering /it/ literally. So change that
too...
In other words, unescape the lone '+' and change all the pluses that
follow it to backticks.
AsciiDoc renders this paragraph identically before and after this
commit, and Asciidoctor now renders this the same as AsciiDoc.
I did try to switch the whole paragraph to using backticks rather than
pluses. That worked great with Asciidoctor, but confused AsciiDoc...
Let's go with this rather surgical change instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example output of `git merge-index` has been enriched by a second
"column" of helpful comments. When Asciidoctor renders this, the cells
in that second column aren't aligned.
Fix this by marking the example shell session as a code listing by
wrapping it in "----". Also drop some of the horizontal space between
the two columns so that we fit into 80 columns. This changes the
rendering with both AsciiDoc and Asciidoctor. They now render this
identically, nicely aligned, and within 80 columns.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The indented lines in the example shell script listing are indented
differently by AsciiDoc and Asciidoctor.
Fix this by marking the example shell script as a code listing by
wrapping it in "----". Because this gives us some extra indentation, we
can remove the one that we have been carrying explicitly. That is, drop
the first tab of indentation on each line. For consistency, make the
same change to the short example shell session further down.
With AsciiDoc, this results in identical rendering before and after this
commit. Asciidoctor now renders this the same as AsciiDoc does.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second "column" in the output of `git ls-remote` is typeset
differently by AsciiDoc and Asciidoctor, similar to various examples
touched by the last few commits.
Fix this by marking the example shell session as a code listing by
wrapping it in "----". Because this gives us some extra indentation, we
can remove the one that we have been carrying explicitly. That is, drop
the first tab of indentation on each line. With AsciiDoc, this results
in identical rendering before and after this commit. Asciidoctor now
renders this the same as AsciiDoc does.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The indented lines in these example config-file listings are indented
differently by AsciiDoc and Asciidoctor.
Fix this by marking the example config-files as code listings by
wrapping them in "----". Because this gives us some extra indentation,
we can remove the one that we have been carrying explicitly. That is,
drop the first tab of indentation on each line.
With AsciiDoc, this results in identical rendering before and after this
commit. Asciidoctor now renders this the same as AsciiDoc does.
git-config.txt pretty consistently uses twelve dashes rather than the
minimum four to spell "----". Let's stick to the file-local convention
there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several graphs in this document. For most of them, we use a
single leading tab to indent the whole graph, and then we use spaces
(possibly eight or more) to align things within the graph.
In the larger graph, we use a different strategy: We use 1-N tabs and
just a small number of spaces (<8). This is how we usually prefer to do
our indenting, but Asciidoctor ends up rendering this differently from
AsciiDoc. Same thing for the if-then-fi examples where the conditional
code is indented by two tabs, which renders differently under AsciiDoc
and Asciidoctor.
Similar to 379805051d ("Documentation: render revisions correctly under
Asciidoctor", 2018-05-06), use an explicit literal block to indicate
that we want to keep the leading whitespace in the tables. Change not
just the ones that render differently, but all of them for consistency.
Because this gives us some extra indentation, we can remove the one that
we have been carrying explicitly. That is, drop the first tab of
indentation on each line. With AsciiDoc, this results in identical
rendering before and after this commit, both for git-merge-base.1 and
git-merge-base.html.
A less intrusive change would be to replace tabs 2-N on each line with
eight spaces. But let's follow the example set by 379805051d, so that we
can use our preferred way of indenting.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for each of these options contains a list. After the
list, AsciiDoc interprets the continuation as a continuation of the
*list*, not as a continution of the larger block. As a result, we get
too much indentation. Wrap the entire blocks in "--" to fix this. With
Asciidoctor, this commit is a no-op, and the two programs now render
these identically.
These two files share the same problem and indeed, they both document
`--untracked-files` in quite similar ways. I haven't checked to what
extent that is intentional or warranted, and to what extent they have
simply drifted apart. I consider such an investigation and possible
cleanup as out of scope for this commit and this patch series.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames several methods defined in dir.h to make
more sense with the renamed 'struct exclude_list' to 'struct
pattern_list' and 'struct exclude' to 'struct path_pattern':
* last_exclude_matching() -> last_matching_pattern()
* parse_exclude() -> parse_path_pattern()
In addition, the word 'exclude' was replaced with 'pattern'
in the methods below:
* add_exclude_list()
* add_excludes_from_file_to_list()
* add_excludes_from_file()
* add_excludes_from_blob_to_list()
* add_exclude()
* clear_exclude_list()
A few methods with the word "exclude" remain. These will
be handled seperately. In particular, the method
"is_excluded()" is concretely about the .gitignore file
relative to a specific directory. This is the important
boundary between library and consumer: is_excluded() cares
about .gitignore, but is_excluded() calls
last_matching_pattern() to make that decision.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch suffers from a deluge of disguised dangers that disfigure
history rewrites (i.e. deviate from the deliberate changes). Many of
these problems are unobtrusive and can easily go undiscovered until the
new repository is in use. This can result in problems ranging from an
even messier history than what led folks to filter-branch in the first
place, to data loss or corruption. These issues cannot be backward
compatibly fixed, so add a warning to both filter-branch and its manpage
recommending that another tool (such as filter-repo) be used instead.
Also, update other manpages that referenced filter-branch. Several of
these needed updates even if we could continue recommending
filter-branch, either due to implying that something was unique to
filter-branch when it applied more generally to all history rewriting
tools (e.g. BFG, reposurgeon, fast-import, filter-repo), or because
something about filter-branch was used as an example despite other more
commonly known examples now existing. Reword these sections to fix
these issues and to avoid recommending filter-branch.
Finally, remove the section explaining BFG Repo Cleaner as an
alternative to filter-branch. I feel somewhat bad about this,
especially since I feel like I learned so much from BFG that I put to
good use in filter-repo (which is much more than I can say for
filter-branch), but keeping that section presented a few problems:
* In order to recommend that people quit using filter-branch, we need
to provide them a recomendation for something else to use that
can handle all the same types of rewrites. To my knowledge,
filter-repo is the only such tool. So it needs to be mentioned.
* I don't want to give conflicting recommendations to users
* If we recommend two tools, we shouldn't expect users to learn both
and pick which one to use; we should explain which problems one
can solve that the other can't or when one is much faster than
the other.
* BFG and filter-repo have similar performance
* All filtering types that BFG can do, filter-repo can also do. In
fact, filter-repo comes with a reimplementation of BFG named
bfg-ish which provides the same user-interface as BFG but with
several bugfixes and new features that are hard to implement in
BFG due to its technical underpinnings.
While I could still mention both tools, it seems like I would need to
provide some kind of comparison and I would ultimately just say that
filter-repo can do everything BFG can, so ultimately it seems that it
is just better to remove that section altogether.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-format-patch.txt, we were missing some key user information.
First of all, document the special value of `--base=auto`.
Next, while we're at it, surround option arguments with <> and change
existing names such as "Message-Id" to "message id", which conforms with
how existing documentation is written.
Finally, document the `format.outputDirectory` config and change
`format.coverletter` to use camel case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature is now on by default, and is being
written during 'git gc' by default. Typically, Git only writes
a commit-graph when a 'git gc --auto' command passes the gc.auto
setting to actualy do work. This means that a commit-graph will
typically fall behind the commits that are being used every day.
To stay updated with the latest commits, add a step to 'git
fetch' to write a commit-graph after fetching new objects. The
fetch.writeCommitGraph config setting enables writing a split
commit-graph, so on average the cost of writing this file is
very small. Occasionally, the commit-graph chain will collapse
to a single level, and this could be slow for very large repos.
For additional use, adjust the default to be true when
feature.experimental is enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discovered on the mailing list, some of the descriptions of the
ff-related options were unclear. Try to be more precise with what these
options do.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
