Similar to the previous commits, try to avoid peeking into the `struct
lock_file`. We also have some `struct tempfile`s -- let's avoid looking
into those as well.
Note that `do_write_index()` takes a tempfile and that when we call it,
we either have a tempfile which we can easily hand down, or we have a
lock file, from which we need to somehow obtain the internal tempfile.
So we need to leave that one instance of peeking-into. Nevertheless,
this commit leaves us not relying on exactly how the path of the
tempfile / lock file is stored internally.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
44c7e1a7e0 (mem-pool: use more standard initialization and finalization,
2020-08-15) moved the allocation of the mem-pool structure to callers.
It also added an allocation to load_cache_entries_threaded(), but for an
unrelated mem-pool. Fix that by allocating the correct one instead --
the one that is initialized two lines later.
Reported-by: Sandor Bodo-Merle <sbodomerle@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical memory type, such as strbuf, hashmap, or string_list can be
stored on the stack or embedded within another structure. mem_pool
cannot be, because of how mem_pool_init() and mem_pool_discard() are
written. mem_pool_init() does essentially the following (simplified
for purposes of explanation here):
void mem_pool_init(struct mem_pool **pool...)
{
*pool = xcalloc(1, sizeof(*pool));
It seems weird to require that mem_pools can only be accessed through a
pointer. It also seems slightly dangerous: unlike strbuf_release() or
strbuf_reset() or string_list_clear(), all of which put the data
structure into a state where it can be re-used after the call,
mem_pool_discard(pool) will leave pool pointing at free'd memory.
read-cache (and split-index) are the only current users of mem_pools,
and they haven't fallen into a use-after-free mistake here, but it seems
likely to be problematic for future users especially since several of
the current callers of mem_pool_init() will only call it when the
mem_pool* is not already allocated (i.e. is NULL).
This type of mechanism also prevents finding synchronization
points where one can free existing memory and then resume more
operations. It would be natural at such points to run something like
mem_pool_discard(pool...);
and, if necessary,
mem_pool_init(&pool...);
and then carry on continuing to use the pool. However, this fails badly
if several objects had a copy of the value of pool from before these
commands; in such a case, those objects won't get the updated value of
pool that mem_pool_init() overwrites pool with and they'll all instead
be reading and writing from free'd memory.
Modify mem_pool_init()/mem_pool_discard() to behave more like
strbuf_init()/strbuf_release()
or
string_list_init()/string_list_clear()
In particular: (1) make mem_pool_init() just take a mem_pool* and have
it only worry about allocating struct mp_blocks, not the struct mem_pool
itself, (2) make mem_pool_discard() free the memory that the pool was
responsible for, but leave it in a state where it can be used to
allocate more memory afterward (without the need to call mem_pool_init()
again).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
has_dir_name() has some optimizations for the case where entries are
added to an index in the correct order. They kick in if the new entry
sorts after the last one. One of them exits early if the last entry has
a longer name than the directory of the new entry. Here's its comment:
/*
* The directory prefix lines up with part of
* a longer file or directory name, but sorts
* after it, so this sub-directory cannot
* collide with a file.
*
* last: xxx/yy-file (because '-' sorts before '/')
* this: xxx/yy/abc
*/
However, a file named xxx/yy would be sorted before xxx/yy-file because
'-' sorts after NUL, so the length check against the last entry is not
sufficient to rule out a collision. Remove it.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further tweak to a "no backslash in indexed paths" for Windows port
we applied earlier.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: safeguard better against backslashes in file names
In 224c7d70fa (mingw: only test index entries for backslashes, not tree
entries, 2019-12-31), we relaxed the check for backslashes in tree
entries to check only index entries.
However, the code change was incorrect: it was added to
`add_index_entry_with_check()`, not to `add_index_entry()`, so under
certain circumstances it was possible to side-step the protection.
Besides, the description of that commit purported that all index entries
would be checked when in fact they were only checked when being added to
the index (there are code paths that do not do that, constructing
"transient" index entries).
In any case, it was pointed out in one insightful review at
https://github.com/git-for-windows/git/pull/2437#issuecomment-566771835
that it would be a much better idea to teach `verify_path()` to perform
the check for a backslash. This is safer, even if it comes with two
notable drawbacks:
- `verify_path()` cannot say _what_ is wrong with the path, therefore
the user will no longer be told that there was a backslash in the
path, only that the path was invalid.
- The `git apply` command also calls the `verify_path()` function, and
might have been able to handle Windows-style paths (i.e. with
backslashes instead of forward slashes). This will no longer be
possible unless the user (temporarily) sets `core.protectNTFS=false`.
Note that `git add <windows-path>` will _still_ work because
`normalize_path_copy_len()` will convert the backslashes to forward
slashes before hitting the code path that creates an index entry.
The clear advantage is that `verify_path()`'s purpose is to check the
validity of the file name, therefore we naturally tap into all the code
paths that need safeguarding, also implicitly into future code paths.
The benefits of that approach outweigh the downsides, so let's move the
check from `add_index_entry_with_check()` to `verify_path()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier update to Git for Windows declared that a tree object is
invalid if it has a path component with backslash in it, which was
overly strict, which has been corrected. The only protection the
Windows users need is to prevent such path (or any path that their
filesystem cannot check out) from entering the index.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: only test index entries for backslashes, not tree entries
During a clone of a repository that contained a file with a backslash in
its name in the past, as of v2.24.1(2), Git for Windows prints errors
like this:
error: filename in tree entry contains backslash: '\'
The idea is to prevent Git from even trying to write files with
backslashes in their file names: while these characters are valid in
file names on other platforms, on Windows it is interpreted as directory
separator (which would obviously lead to ambiguities, e.g. when there is
a file `a\b` and there is also a file `a/b`).
Arguably, this is the wrong layer for that error: As long as the user
never checks out the files whose names contain backslashes, there should
not be any problem in the first place.
So let's loosen the requirements: we now leave tree entries with
backslashes in their file names alone, but we do require any entries
that are added to the Git index to contain no backslashes on Windows.
Note: just as before, the check is guarded by `core.protectNTFS` (to
allow overriding the check by toggling that config setting), and it
is _only_ performed on Windows, as the backslash is not a directory
separator elsewhere, even when writing to NTFS-formatted volumes.
An alternative approach would be to try to prevent creating files with
backslashes in their file names. However, that comes with its own set of
problems. For example, `git config -f C:\ProgramData\Git\config ...` is
a very valid way to specify a custom config location, and we obviously
do _not_ want to prevent that. Therefore, the approach chosen in this
patch would appear to be better.
This addresses https://github.com/git-for-windows/git/issues/2435
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
When creating a directory on Windows whose path ends in a space or a
period (or chains thereof), the Win32 API "helpfully" trims those. For
example, `mkdir("abc ");` will return success, but actually create a
directory called `abc` instead.
This stems back to the DOS days, when all file names had exactly 8
characters plus exactly 3 characters for the file extension, and the
only way to have shorter names was by padding with spaces.
Sadly, this "helpful" behavior is a bit inconsistent: after a successful
`mkdir("abc ");`, a `mkdir("abc /def")` will actually _fail_ (because
the directory `abc ` does not actually exist).
Even if it would work, we now have a serious problem because a Git
repository could contain directories `abc` and `abc `, and on Windows,
they would be "merged" unintentionally.
As these paths are illegal on Windows, anyway, let's disallow any
accesses to such paths on that Operating System.
For practical reasons, this behavior is still guarded by the
config setting `core.protectNTFS`: it is possible (and at least two
regression tests make use of it) to create commits without involving the
worktree. In such a scenario, it is of course possible -- even on
Windows -- to create such file names.
Among other consequences, this patch disallows submodules' paths to end
in spaces on Windows (which would formerly have confused Git enough to
try to write into incorrect paths, anyway).
While this patch does not fix a vulnerability on its own, it prevents an
attack vector that was exploited in demonstrations of a number of
recently-fixed security bugs.
The regression test added to `t/t7417-submodule-path-url.sh` reflects
that attack vector.
Note that we have to adjust the test case "prevent git~1 squatting on
Windows" in `t/t7415-submodule-names.sh` because of a very subtle issue.
It tries to clone two submodules whose names differ only in a trailing
period character, and as a consequence their git directories differ in
the same way. Previously, when Git tried to clone the second submodule,
it thought that the git directory already existed (because on Windows,
when you create a directory with the name `b.` it actually creates `b`),
but with this patch, the first submodule's clone will fail because of
the illegal name of the git directory. Therefore, when cloning the
second submodule, Git will take a different code path: a fresh clone
(without an existing git directory). Both code paths fail to clone the
second submodule, both because the the corresponding worktree directory
exists and is not empty, but the error messages are worded differently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The config setting `core.protectNTFS` is specifically designed to work
not only on Windows, but anywhere, to allow for repositories hosted on,
say, Linux servers to be protected against NTFS-specific attack vectors.
As a consequence, `is_ntfs_dotgit()` manually splits backslash-separated
paths (but does not do the same for paths separated by forward slashes),
under the assumption that the backslash might not be a valid directory
separator on the _current_ Operating System.
However, the two callers, `verify_path()` and `fsck_tree()`, are
supposed to feed only individual path segments to the `is_ntfs_dotgit()`
function.
This causes a lot of duplicate scanning (and very inefficient scanning,
too, as the inner loop of `is_ntfs_dotgit()` was optimized for
readability rather than for speed.
Let's simplify the design of `is_ntfs_dotgit()` by putting the burden of
splitting the paths by backslashes as directory separators on the
callers of said function.
Consequently, the `verify_path()` function, which already splits the
path by directory separators, now treats backslashes as directory
separators _explicitly_ when `core.protectNTFS` is turned on, even on
platforms where the backslash is _not_ a directory separator.
Note that we have to repeat some code in `verify_path()`: if the
backslash is not a directory separator on the current Operating System,
we want to allow file names like `\`, but we _do_ want to disallow paths
that are clearly intended to cause harm when the repository is cloned on
Windows.
The `fsck_tree()` function (the other caller of `is_ntfs_dotgit()`) now
needs to look for backslashes in tree entries' names specifically when
`core.protectNTFS` is turned on. While it would be tempting to
completely disallow backslashes in that case (much like `fsck` reports
names containing forward slashes as "full paths"), this would be
overzealous: when `core.protectNTFS` is turned on in a non-Windows
setup, backslashes are perfectly valid characters in file names while we
_still_ want to disallow tree entries that are clearly designed to
exploit NTFS-specific behavior.
This simplification will make subsequent changes easier to implement,
such as turning `core.protectNTFS` on by default (not only on Windows)
or protecting against attack vectors involving NTFS Alternate Data
Streams.
Incidentally, this change allows for catching malicious repositories
that contain tree entries of the form `dir\.gitmodules` already on the
server side rather than only on the client side (and previously only on
Windows): in contrast to `is_ntfs_dotgit()`, the
`is_ntfs_dotgitmodules()` function already expects the caller to split
the paths by directory separators.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
CI updates.
* js/azure-pipelines-msvc:
ci: also build and test with MS Visual Studio on Azure Pipelines
ci: really use shallow clones on Azure Pipelines
tests: let --immediate and --write-junit-xml play well together
test-tool run-command: learn to run (parts of) the testsuite
vcxproj: include more generated files
vcxproj: only copy `git-remote-http.exe` once it was built
msvc: work around a bug in GetEnvironmentVariable()
msvc: handle DEVELOPER=1
msvc: ignore some libraries when linking
compat/win32/path-utils.h: add #include guards
winansi: use FLEX_ARRAY to avoid compiler warning
msvc: avoid using minus operator on unsigned types
push: do not pretend to return `int` from `die_push_simple()`
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
MSVC complains about this with `-Wall`, which can be taken as a sign
that this is indeed a real bug. The symptom is:
C4146: unary minus operator applied to unsigned type, result
still unsigned
Let's avoid this warning in the minimal way, e.g. writing `-1 -
<unsigned value>` instead of `-<unsigned value> - 1`.
Note that the change in the `estimate_cache_size()` function is
needed because MSVC considers the "return type" of the `sizeof()`
operator to be `size_t`, i.e. unsigned, and therefore it cannot be
negated using the unary minus operator.
Even worse, that arithmetic is doing extra work, in vain. We want to
calculate the entry extra cache size as the difference between the
size of the `cache_entry` structure minus the size of the
`ondisk_cache_entry` structure, padded to the appropriate alignment
boundary.
To that end, we start by assigning that difference to the `per_entry`
variable, and then abuse the `len` parameter of the
`align_padding_size()` macro to take the negative size of the ondisk
entry size. Essentially, we try to avoid passing the already calculated
difference to that macro by passing the operands of that difference
instead, when the macro expects operands of an addition:
#define align_padding_size(size, len) \
((size + (len) + 8) & ~7) - (size + len)
Currently, we pass A and -B to that macro instead of passing A - B and
0, where A - B is already stored in the `per_entry` variable, ready to
be used.
This is neither necessary, nor intuitive. Let's fix this, and have code
that is both easier to read and that also does not trigger MSVC's
warning.
While at it, we take care of reporting overflows (which are unlikely,
but hey, defensive programming is good!).
We _also_ take pains of casting the unsigned value to signed: otherwise,
the signed operand (i.e. the `-1`) would be cast to unsigned before
doing the arithmetic.
Helped-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getting the lock for the index, refreshing it and then writing it is a
pattern that happens more than once throughout the codebase, and isn't
trivial to get right. Factor out the refresh_and_write_cache function
from builtin/am.c to read-cache.c, so it can be re-used in other
places in a subsequent commit.
Note that we return different error codes for failing to refresh the
cache, and failing to write the index. The current caller only cares
about failing to write the index. However for other callers we're
going to convert in subsequent patches we will need this distinction.
Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
The core.untrackedCache config setting is slightly complicated,
so clarify its use and centralize its parsing into the repo
settings.
The default value is "keep" (returned as -1), which persists the
untracked cache if it exists.
If the value is set as "false" (returned as 0), then remove the
untracked cache if it exists.
If the value is set as "true" (returned as 1), then write the
untracked cache and persist it.
Instead of relying on magic values of -1, 0, and 1, split these
options into an enum. This allows the use of "-1" as a
default value. After parsing the config options, if the value is
unset we can initialize it to UNTRACKED_CACHE_KEEP.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few important config settings that are not loaded
during git_default_config. These are instead loaded on-demand.
Centralize these config options to a single scan, and store
all of the values in a repo_settings struct. The values for
each setting are initialized as negative to indicate "unset".
This centralization will be particularly important in a later
change to introduce "meta" config settings that change the
defaults for these config settings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to avoid signed integer overlaps during binary search.
* rs/avoid-overflow-in-midpoint-computation:
cleanup: fix possible overflow errors in binary search, part 2
do_read_index() mmaps the index, or tries to die with an error message
on failure. It should call xmmap_gently(), which returns MAP_FAILED,
rather than xmmap(), which dies with its own error message.
An easy way to cause this mmap to fail is by setting $GIT_INDEX_FILE to
a path to a directory and then invoking any command that reads from the
index.
Signed-off-by: Varun Naik <vcnaik94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to avoid signed integer overlaps during binary search.
* rs/avoid-overflow-in-midpoint-computation:
cleanup: fix possible overflow errors in binary search, part 2
The data collected by fsmonitor was not properly written back to
the on-disk index file, breaking t7519 tests occasionally, which
has been corrected.
* js/fsmonitor-unflake:
mark_fsmonitor_valid(): mark the index as changed if needed
fill_stat_cache_info(): prepare for an fsmonitor fix
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
Calculating the sum of two array indexes to find the midpoint between
them can overflow, i.e. code like this is unsafe for big arrays:
mid = (first + last) >> 1;
Make sure the intermediate value stays within the boundaries instead,
like this:
mid = first + ((last - first) >> 1);
The loop condition of the binary search makes sure that 'last' is
always greater than 'first', so this is safe as long as 'first' is
not negative. And that can be verified easily using the pre-context
of each change, except for name-hash.c, so add an assertion to that
effect there.
The unsafe calculations were found with:
git grep '(.*+.*) *>> *1'
This is a continuation of 19716b21a4 (cleanup: fix possible overflow
errors in binary search, 2017-10-08).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this bug fix, t7519's four "status doesn't detect unreported
modifications" test cases would fail occasionally (and, oddly enough,
*a lot* more frequently on Windows).
The reason is that these test cases intentionally use the side effect of
`git status` to re-write the index if any updates were detected: they
first clean the worktree, run `git status` to update the index as well
as show the output to the casual reader, then make the worktree dirty
again and expect no changes to reported if running with a mocked
fsmonitor hook.
The problem with this strategy was that the index was written during
said `git status` on the clean worktree for the *wrong* reason: not
because the index was marked as changed (it wasn't), but because the
recorded mtimes were racy with the index' own mtime.
As the mtime granularity on Windows is 100 nanoseconds (see e.g.
https://docs.microsoft.com/en-us/windows/desktop/SysInfo/file-times),
the mtimes of the files are often enough *not* racy with the index', so
that that `git status` call currently does not always update the index
(including the fsmonitor extension), causing the test case to fail.
The obvious fix: if we change *any* index entry's `CE_FSMONITOR_VALID`
flag, we should also mark the index as changed. That will cause the
index to be written upon `git status`, *including* an updated fsmonitor
extension.
Side note: Even though the reader might think that the t7519 issue
should be *much* more prevalent on Linux, given that the ext4 filesystem
(that seems to be used by every Linux distribution) stores mtimes in
nanosecond precision. However, ext4 uses `current_kernel_time()` (see
https://unix.stackexchange.com/questions/11599#comment762968_11599; it
is *amazingly* hard to find any proper source of information about such
ext4 questions) whose accuracy seems to depend on many factors but is
safely worse than the 100-nanosecond granularity of NTFS (again, it is
*horribly* hard to find anything remotely authoritative about this
question). So it seems that the racy index condition that hid the bug
fixed by this patch simply is a lot more likely on Linux than on
Windows. But not impossible ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need to pass down the `struct index_state` to
`mark_fsmonitor_valid()` for an upcoming bug fix, and this here function
calls that there function, so we need to extend the signature of
`fill_stat_cache_info()` first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsmonitor interface got out of sync after the in-core index
file gets discarded, which has been corrected.
* js/fsmonitor-refresh-after-discarding-index:
fsmonitor: force a refresh after the index was discarded
fsmonitor: demonstrate that it is not refreshed after discard_index()
The load_cache_entries_threaded() function takes a src_offset parameter
that it doesn't use. This has been there since its inception in
77ff1127a4 (read-cache: load cache entries on worker threads,
2018-10-10).
Digging on the mailing list, that parameter was part of an earlier
iteration of the series[1], but became unnecessary when the code
switched to using the IEOT extension.
[1] https://public-inbox.org/git/20180906210227.54368-5-benpeart@microsoft.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a trivial bug that's been here since the shared/do_write_index
tracing was added in 42fee7a388 ("trace2:data: add trace2
instrumentation to index read/write", 2019-02-22). We should have
enter/leave points, not two enter/enter points. This resulted in an
"enter" event without a corresponding "leave" event.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git add" on a repository created inside the current
repository is an explicit indication that the user wants to add it
as a submodule, but when the HEAD of the inner repository is on an
unborn branch, it cannot be added as a submodule. Worse, the files
in its working tree can be added as if they are a part of the outer
repository, which is not what the user wants. These problems are
being addressed.
* km/empty-repo-is-still-a-repo:
add: error appropriately on repository with no commits
dir: do not traverse repositories with no commits
submodule: refuse to add repository with no commits
With this change, the `index_state` struct becomes the new home for the
flag that says whether the fsmonitor hook has been run, i.e. it is now
per-index.
It also gets re-set when the index is discarded, fixing the bug
demonstrated by the "test_expect_failure" test added in the preceding
commit. In that case fsmonitor-enabled Git would miss updates under
certain circumstances, see that preceding commit for details.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from unsigned char[20] to struct object_id continues.
* bc/hash-transition-16: (35 commits)
gitweb: make hash size independent
Git.pm: make hash size independent
read-cache: read data in a hash-independent way
dir: make untracked cache extension hash size independent
builtin/difftool: use parse_oid_hex
refspec: make hash size independent
archive: convert struct archiver_args to object_id
builtin/get-tar-commit-id: make hash size independent
get-tar-commit-id: parse comment record
hash: add a function to lookup hash algorithm by length
remote-curl: make hash size independent
http: replace sha1_to_hex
http: compute hash of downloaded objects using the_hash_algo
http: replace hard-coded constant with the_hash_algo
http-walker: replace sha1_to_hex
http-push: remove remaining uses of sha1_to_hex
http-backend: allow 64-character hex names
http-push: convert to use the_hash_algo
builtin/pull: make hash-size independent
builtin/am: make hash size independent
...
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
The previous commit made 'git add' abort when given a repository that
doesn't have a commit checked out. However, the output upon failure
isn't appropriate:
% git add repo
warning: adding embedded git repository: repo
hint: You've added another git repository inside your current repository.
hint: [...]
error: unable to index file 'repo/'
fatal: adding files failed
The hint doesn't apply in this case, and the error message doesn't
tell the user why 'repo' couldn't be added to the index.
Provide better output by teaching add_to_index() to error when given a
git directory where HEAD can't be resolved. To avoid the embedded
repository warning and hint, call check_embedded_repo() only after
add_file_to_index() succeeds because, in general, its output doesn't
make sense if adding to the index fails.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Index entries are structured with a variety of fields up front, followed
by a hash and one or two flags fields. Because the hash field is stored
in the middle of the structure, it's difficult to use one fixed-size
structure that easily allows access to the hash and flags fields.
Adjust the structure to hold the maximum amount of data that may be
needed using a member called "data" and read and write this field
independently in the various places that need to read and write the
structure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
