Fix a memory leak in code added in 41abfe15d9 (maintenance: add
pack-refs task, 2021-02-09), we need to call strvec_clear() on the
"struct strvec" that we initialized.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1c41d2805e (unpack_trees_options: free messages when done,
2018-05-21) we started calling clear_unpack_trees_porcelain() on this
codepath, but missed this error path.
We could call clear_unpack_trees_porcelain() just before we error()
and return when unmerged_cache() fails, but the more correct fix is to
not have the unmerged_cache() check happen in the middle of our
"topts" setup.
Before 23cbf11b5c (merge-recursive: porcelain messages for checkout,
2010-08-11) we would not malloc() to setup our "topts", which is when
this started to leak on the error path.
Before that this code wasn't conflating the setup of "topts" and the
unmerged_cache() call in any meaningful way. The initial version in
782c2d65c2 (Build in checkout, 2008-02-07) just does a "memset" of
it, and initializes a single struct member.
Then in 8ccba008ee (unpack-trees: allow Porcelain to give different
error messages, 2008-05-17) we added the initialization of the error
message, which as noted above finally started leaking in 23cbf11b5c.
Let's fix the memory leak, and avoid future issues by initializing the
"topts" with a helper function. There are no functional changes here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "merge-file", we need to loop over the "mmfs"
array and free() what we've got so far when we error out. As a result
we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the code in builtin/merge-file.c to:
* Use the initializer to zero out "mmfs", and use modern C syntax for
the rest.
* Refactor the the inner loop to use a variable and "if/else if"
pattern followed by "return". This will make a change to change it to
a "goto cleanup" pattern smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 440c705ea6 (cat-file: add
--batch-command mode, 2022-02-18). The free_cmds() function was only
called on "queued_nr" if we had a "flush" command. As the "without
flush for blob info" test added in the same commit shows we can't rely
on that, so let's call free_cmds() again at the end.
Since "nr" follows the usual pattern of being set to 0 if we've
free()'d the memory already it's OK to call it twice, even in cases
where we are doing a "flush".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call the release_revisions() function added in
1878b5edc0 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_revert(), as well as freeing
the xmalloc()'d "revs" member itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in bf0231c661 (rev-parse: add
--show-superproject-working-tree, 2017-03-08), we should never have
made the result of xgetcwd() a "const char *", as we return a
strbuf_detach()'d value. Let's fix that and free() it when we're done
with it.
We can't mark any tests passing passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true" as a result of this change, but
e.g. "t/t1500-rev-parse.sh" now gets closer to passing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak added in 0ec4b1650c (clone: fix ref selection in
--single-branch --branch=xxx, 2012-06-22).
Whether we get our "remote_head" from copy_ref() directly, or with a
call to guess_remote_head() it'll be the result of a copy_ref() in
either case, as guess_remote_head() is a wrapper for copy_ref() (or it
returns NULL).
We can't mark any tests passing passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true" as a result of this change, but
e.g. "t/t1500-rev-parse.sh" now gets closer to passing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "git check-ref-format" that's been present in the
code in one form or another since 38eedc634b (git check-ref-format
--print, 2009-10-12), the code got substantially refactored in
cfbe22f03f (check-ref-format: handle subcommands in separate
functions, 2010-08-05).
As a result we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test had a line reading
! test_file_is_empty actual
which was meant to be
! test_must_be_empty actual
The test worked despite the error, because even though
test_file_is_empty is a non-existent function, the '!' negated the
return value and made it pass. It'd be better to avoid the negation,
so something like
test_file_not_empty actual
would be better, but perhaps it makes even more sense to specify the
number of lines of expected output to make the test a bit tighter.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Elijah Newren <newren@palantir.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "test_when_finished" cleanup phase added in 4179b4897f (config:
allow overriding of global and system configuration, 2021-04-19) has
never worked as intended, firstly the ".config/git" is a directory, so
we'd need the "-r" flag, but more importantly the $HOME variable
wasn't properly quoted.
We'd thus end up trying to remove the "trash" part of "trash
directory", which wouldn't fail with "-f", since "rm -f" won't fail on
non-existing files.
It's possible that this would have caused an actual failure if someone
had a $HOME with a space character in it, such that our "rm -f" would
fail to remove an existing directory, but in practice that probably
never happened.
Let's fix both the quoting issue, and the other issue cleanup issue in
4179b4897f, which is that we were attempting to clean up
~/.config/git, but weren't cleaing up ~/.gitconfig.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a quoting issue in the function introduced in
b9638d7286 (test-lib: make $GIT_BUILD_DIR an absolute path,
2022-02-27), running the test suite where the git checkout was on a
path with e.g. a space in it would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix inclusion errors which would occur if the $TEST_DIRECTORY had $IFS
whitespace in it.
See d42bab442d (core.fsyncmethod: tests for batch mode, 2022-04-04)
and a242c150eb (vimdiff: integrate layout tests in the unit tests
framework ('t' folder), 2022-03-30) for the two relevant commits. Both
were first released with v2.37.0-rc0 (and were also part of v2.37.0).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While inspecting the 'git rebase' documentation, I noticed that it is
inconsistent with how it uses back-ticks (or other punctuation) for
identifying Git commands, command-line arguments, or values for those
arguments.
Sometimes, an argument (like '--interactive') would appear without any
punctuation, causing the argument to not have any special formatting.
Other times, arguments or 'git rebase' itself would have single-quotes
giving a bold look (in the HTML documentation at least).
By consistently using back-ticks, these types of strings appear in a
monospace font with special highlighting to appear more clearly as text
that exists in a command-line invocation of a Git command.
This rather-large diff is the result of scanning git-rebase.txt and
adding back-ticks as appropriate. Some are adding back-ticks where there
was no punctuation. Others are replacing single quotes.
There are also a few minor cleanups in the process, including those
found by reviewers.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size and padding of `struct object_entry` is an important factor in
determining the memory usage of `pack-objects`. For this reason,
3b13a5f263 (pack-objects: reorder members to shrink struct object_entry,
2018-04-14) added a comment containing some information from pahole
indicating the size and padding of that struct.
Unfortunately, this comment hasn't been updated since 9ac3f0e5b3
(pack-objects: fix performance issues on packing large deltas,
2018-07-22), despite the size of this struct changing many times since
that commit.
To see just how often the size of object_entry changes, I skimmed the
first-parent history with this script:
for sha in $(git rev-list --first-parent --reverse 9ac3f0e..)
do
echo -n "$sha "
git checkout -q $sha
make -s pack-objects.o 2>/dev/null
pahole -C object_entry pack-objects.o | sed -n \
-e 's/\/\* size: \([0-9]*\).*/size \1/p' \
-e 's/\/\*.*padding: \([0-9]*\).*/padding \1/p' | xargs
done | uniq -f1
In between each merge, the size of object_entry changes too often to
record every instance here. But the important merges (along with their
corresponding sizes and bit paddings) in chronological order are:
ad635e82d6 (Merge branch 'nd/pack-objects-pack-struct', 2018-05-23) size 80 padding 4
29d9e3e2c4 (Merge branch 'nd/pack-deltify-regression-fix', 2018-08-22) size 80 padding 9
3ebdef2e1b (Merge branch 'jk/pack-delta-reuse-with-bitmap', 2018-09-17) size 80 padding 8
33e4ae9c50 (Merge branch 'bc/sha-256', 2019-01-29) size 96 padding 8
(indicating that the current size of the struct is 96 bytes, with 8
padding bits).
Even though this comment was written in a good spirit, it is updated
infrequently enough that it serves to confuse rather than to encourage
contributors to update the appropriate values when the modify the
definition of object_entry.
For that reason, eliminate the confusion by removing the comment
altogether.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of `git add -i` used `git update-index --add
--remove`, but the built-in version implemented only the `--add` part.
This fixes https://github.com/msys2/MSYS2-packages/issues/3066
Reported-by: Christoph Reiter <reiter.christoph@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "say" function, with various rewrites of the remaining
git-*.sh code to C and the preceding change to have git-submodule.sh
stop using the GIT_QUIET variable there were only four uses in
git-subtree.sh. Let's have it use an "arg_quiet" variable instead, and
move the "say" function over to it.
The only other use was a trivial message in git-instaweb.sh, since it
has never supported the --quiet option (or similar) that code added in
0b624b4cee (instaweb: restart server if already running, 2009-11-22)
can simply use "echo" instead.
The remaining in-tree hits from "say" are all for the sibling function
defined in t/test-lib.sh. It's safe to remove this function since it
has never been documented in Documentation/git-sh-setup.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the use of the "$GIT_QUIET" variable in favor of our own
"$quiet", ever since b3c5f5cb04 (submodule: move core cmd_update()
logic to C, 2022-03-15) we have not used the "say" function in
git-sh-setup.sh, which is the only thing that's affected by using
"GIT_QUIET".
We still want to support --quiet for our own use though, but let's use
our own variable for that. Now it's obvious that we only care about
passing "--quiet" to "git submodule--helper", and not to change the
output of any "say" invocation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up on the preceding commit which taught "git submodule--helper
update" to understand "--merge", "--checkout" and "--rebase" and use
those options instead of "--update=(rebase|merge|checkout|none)" when
the command invokes itself.
Unlike the preceding change this isn't strictly necessary to
eventually change "git-submodule.sh" so that it invokes "git
submodule--helper update" directly, but let's remove this
inconsistency in the command-line interface. We shouldn't need to
carry special synonyms for existing options in "git submodule--helper"
when that command can use the primary documented names instead.
But, as seen in the post-image this makes the control flow within
"builtin/submodule--helper.c" simpler, we can now write directly to
the "update_default" member of "struct update_data" when parsing the
options in "module_update()".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Understand --checkout, --merge and --rebase synonyms for
--update={checkout,merge,rebase}, as well as the short options that
'git submodule' itself understands.
This removes a difference between the CLI API of "git submodule" and
"git submodule--helper", making it easier to make the latter an alias
for the former. See 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29) for the initial addition of
--update.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user-facing "git submodule--helper" commands so that
they'll report their name as being "git submodule". To a user these
commands are internal implementation details, and it doesn't make
sense to emit usage about an internal helper when "git submodule" is
invoked with invalid options.
Before this we'd emit e.g.:
$ git submodule absorbgitdirs --blah
error: unknown option `blah'
usage: git submodule--helper absorbgitdirs [<options>] [<path>...]
[...]
And:
$ git submodule set-url -- --
usage: git submodule--helper set-url [--quiet] <path> <newurl>
[...]
Now we'll start with "usage: git submodule [...]" in both of those
cases. This change does not alter the "list", "name", "clone",
"config" and "create-branch" commands, those are internal-only (as an
aside; their usage info should probably invoke BUG(...)). This only
changes the user-facing commands.
The "status", "deinit" and "update" commands are not included in this
change, because their usage information already used "submodule"
rather than "submodule--helper".
I don't think it's currently possible to emit some of this usage
information in practice, as git-submodule.sh will catch unknown
options, and e.g. it doesn't seem to be possible to get "add" to emit
its usage information from "submodule--helper".
Though that change may be superfluous now, it's also harmless, and
will allow us to eventually dispatch further into "git
submodule--helper" from git-submodule.sh, while emitting the correct
usage output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "absorb-git-dirs" subcommand to "absorbgitdirs", which is
what the "git submodule" command itself has called it since the
subcommand was implemented in f6f8586140 (submodule: add
absorb-git-dir function, 2016-12-12).
Having these two be different will make it more tedious to dispatch to
eventually dispatch "git submodule--helper" directly, as we'd need to
retain this name mapping. So let's get rid of this needless
inconsistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e84c3cf3dc (git-submodule.sh: accept verbose flag in cmd_update to
be non-quiet, 2018-08-14) the "git submodule update" sub-command was
made to understand "-v", but the option was never documented.
The only in-tree user has been this test added in
3ad0401e9e (submodule update: silence underlying merge/rebase with
"--quiet", 2020-09-30), it wasn't per-se testing --quiet, but fixing a
bug in e84c3cf3dc: It used to set "GIT_QUIET=0" instead of unsetting
it on "-v", and thus we'd end up passing "--quiet" to "git
submodule--helper" on "-v", since the "--quiet" option was passed
using the ${parameter:+word} construct.
Furthermore, even if someone had used the "-v" option they'd only be
getting the default output. Our default in both git-submodule.sh and
"git submodule--helper" has been to be "verbose", so the only way this
option could have matter is if it were used as e.g.:
git submodule --quiet update -v [...]
I.e. to undo the effect of a previous "--quiet" on the command-line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust code added in 0060fd1511 (clone --recurse-submodules: prevent
name squatting on Windows, 2019-09-12) to have the internal
--require-init option imply --init, rather than having
"git-submodule.sh" add it implicitly.
This change doesn't make any difference now, but eliminates another
special-case where "git submodule--helper update"'s behavior was
different from "git submodule update". This will make it easier to
eventually replace the cmd_update() function in git-submodule.sh.
We'll still need to keep the distinction between "--init" and
"--require-init" in git-submodule.sh. Once cmd_update() gets
re-implemented in C we'll be able to change variables and other code
related to that, but not yet.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 5c08dbbdf1 (git-submodule: fix subcommand parser, 2008-01-15) the
"--branch" option was supported as an option to "git submodule"
itself, i.e. "git submodule --branch" as a side-effect of its
implementation.
Then in b57e8119e6 (submodule: teach set-branch subcommand,
2019-02-08) when the "set-branch" subcommand was added the assertion
that we shouldn't have "--branch" anywhere except as an argument to
"add" and "set-branch" was copy/pasted from the adjacent check for
"--cache" added (or rather modified) in 496eeeb19b (git-submodule.sh:
avoid "test <cond> -a/-o <cond>", 2014-06-10).
But there's been a logic error in that check, which at a glance looked
like it should be supporting:
git submodule --branch <branch> (add | set-branch) [<options>]
But due to "||" in the condition (as opposed to "&&" for "--cache") if
we have "--branch" here already we'll emit usage, even for "add" and
"set-branch".
So in addition to never having documented this form, it hasn't worked
since b57e8119e6 was released with v2.22.0.
So it's safe to remove this code. I.e. we don't want to support the
form noted above, but only:
git submodule (add | set-branch) --branch <branch> [<options>]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the assignment of "$1" to the "$cached" variable. As seen in
the initial implementation in 70c7ac22de (Add git-submodule command,
2007-05-26) we only need to keep track of if we've seen the --cached
option, not save the "--cached" string for later use.
In 28f9af5d25 (git-submodule summary: code framework, 2008-03-11)
"$1" was assigned to it, but since there was no reason to do so let's
stop doing it. This trivial change will make it easier to reason about
an eventual change that'll remove the cmd_summary() function in favor
of dispatching to "git submodule--helper summary" directly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the $prefix variable which isn't used anymore, and hasn't been
since b3c5f5cb04 (submodule: move core cmd_update() logic to C,
2022-03-15).
Before that we'd use it to invoke "git submodule--helper" with the
"--recursive-prefix" option, but since b3c5f5cb04 that "git
submodule--helper" option is only used when it invokes itself.
So the "--recursive-prefix" option is still in use, but at this point
only when the helper invokes itself during submodule recursion. See
the "--recursive-prefix" option added in
c51f8f94e5 (submodule--helper: run update procedures from C,
2021-08-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sanitize_submodule_env() function was last used before
b3c5f5cb04 (submodule: move core cmd_update() logic to C,
2022-03-15), let's remove it.
This also allows us to remove clear_local_git_env() from
git-sh-setup.sh. That function hasn't been documented in
Documentation/git-sh-setup.sh, and since 14111fc492 (git: submodule
honor -c credential.* from command line, 2016-02-29) it had only been
used in the sanitize_submodule_env() function being removed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The contrib/vscode/init.sh script initializes the .vscode directory with
some helpful metadata so VS Code handles Git code better.
One big issue that VS Code has is detecting the tab width based on file
type. ".txt" files were not covered by this script before, so add them
with the appropriate tab widths. This prevents inserting spaces instead
of tabs and keeps the tab width to eight instead of four or two.
While we are here, remove the "editor.wordWrap" settings. The editor's
word wrap is only cosmetic: it does not actually insert newlines when
your typing goes over the column limit. This can make it appear like you
have properly wrapped code, but it is incorrect. Further, existing code
that is over the column limit is wrapped even if your editor window is
wider than the limit. This can make reading such code more difficult.
Without these lines, VS Code renders the lines accurately, without
"ghost" newlines.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
43966ab315 (revert: optionally refer to commit in the "reference"
format, 2022-05-26) added the documentation file config/revert.txt.
Actually include it in config.txt.
Make is used with a bare infinitive after the object; remove the "to".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Run msgmerge with --no-location to drop file locations to decrease the
size of future patches. Also removed old translations.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Commit 7281c196b1 (transfer doc: move fetch.credentialsInUrl to
"transfer" config namespace, 2022-06-15) propagates a typo from
6dcbdc0d66 (remote: create fetch.credentialsInUrl config, 2022-06-06),
where "other" is misspelled as "oher". Fix the typo accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation explained the conversion from remote branch path to
local tracking ref path for @{push}, but not for @{upstream}.
Add the explanation to @{upstream}, and reference it in @{push} to avoid
undue repetition.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.4
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.34:
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
