This file had its own identical helper that predates
xstrdup_or_null. Let's use the global one to avoid
repetition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
Some MUAs mangled a line in a message that begins with "From " to
">From " when writing to a mailbox file and feeding such an input
to "git am" used to lose such a line.
* jk/mbox-from-line:
mailinfo: work around -Wstring-plus-int warning
mailinfo: make ">From" in-body header check more robust
"rev-parse --verify --quiet $name" is meant to quietly exit with a
non-zero status when $name is not a valid object name, but still
gave error messages in some cases.
* da/rev-parse-verify-quiet:
stash: prefer --quiet over shell redirection of the standard error stream
refs: make rev-parse --quiet actually quiet
t1503: use test_must_be_empty
Documentation: a note about stdout for git rev-parse --verify --quiet
pre- and post-receive hooks are no longer required to read all
their inputs.
* jc/ignore-sigpipe-while-running-hooks:
receive-pack: allow hooks to ignore its standard input stream
Code cleanup.
* jk/prune-packed-server-info:
repack: call prune_packed_objects() and update_server_info() directly
server-info: clean up after writing info/packs
make update-server-info more robust
prune-packed: fix minor memory leak
"hash-object" learned a new "--literally" option to hash any random
garbage into a loose object, to allow us to create a test data for
mechanisms to catch corrupt objects.
* jc/hash-object:
hash-object: add --literally option
hash-object: pass 'write_object' as a flag
hash-object: reduce file-scope statics
Teach "git fsck" to inspect the contents of annotated tag objects.
* js/fsck-tag-validation:
Make sure that index-pack --strict checks tag objects
Add regression tests for stricter tag fsck'ing
fsck: check tag objects' headers
Make sure fsck_commit_buffer() does not run out of the buffer
fsck_object(): allow passing object data separately from the object itself
Refactor type_from_string() to allow continuing after detecting an error
clang gives the following warning:
builtin/receive-pack.c:327:35: error: sizeof on array function
parameter will return size of 'unsigned char *' instead of 'unsigned
char [20]' [-Werror,-Wsizeof-array-argument]
git_SHA1_Update(&ctx, out, sizeof(out));
^
builtin/receive-pack.c:292:37: note: declared here
static void hmac_sha1(unsigned char out[20],
^
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The just-released Apple Xcode 6.0.1 has -Wstring-plus-int enabled by
default which complains about pointer arithmetic applied to a string
literal:
builtin/mailinfo.c:303:24: warning:
adding 'long' to a string does not append to the string
return !memcmp(SAMPLE + (cp - line), cp, strlen(SAMPLE) ...
~~~~~~~^~~~~~~~~~~~~
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" failed to report that it found corrupt objects via its
exit status in some cases.
* jk/fsck-exit-code-fix:
fsck: return non-zero status on missing ref tips
fsck: exit with non-zero status upon error from fsck_obj()
"git config --add section.var val" used to lose existing
section.var whose value was an empty string.
* ta/config-add-to-empty-or-true-fix:
config: avoid a funny sentinel value "a^"
make config --add behave correctly for empty and NULL values
When receiving an invalid pack stream that records the same object
twice, multiple threads got confused due to a race. We should
reject or correct such a stream upon receiving, but that will be a
larger change.
* jk/index-pack-threading-races:
index-pack: fix race condition with duplicate bases
Code clean-up.
* jk/commit-author-parsing:
determine_author_info(): copy getenv output
determine_author_info(): reuse parsing functions
date: use strbufs in date-formatting functions
record_author_date(): use find_commit_header()
record_author_date(): fix memory leak on malformed commit
commit: provide a function to find a header in a buffer
"log --date=iso" uses a slight variant of ISO 8601 format that is
made more human readable. A new "--date=iso-strict" option gives
datetime output that is more strictly conformant.
* bb/date-iso-strict:
pretty: provide a strict ISO 8601 date format
Sometimes users want to report a bug they experience on their
repository, but they are not at liberty to share the contents of
the repository. "fast-export" was taught an "--anonymize" option
to replace blob contents, names of people and paths and log
messages with bland and simple strings to help them.
* jk/fast-export-anonymize:
docs/fast-export: explain --anonymize more completely
teach fast-export an --anonymize option
The number of refs that can be pushed at once over smart HTTP was
limited by the command line length. The limitation has been lifted
by passing these refs from the standard input of send-pack.
* jk/send-pack-many-refspecs:
send-pack: take refspecs over stdin
When a reflog is deleted, e.g. when "git stash" clears its stashes,
"git rev-parse --verify --quiet" dies:
fatal: Log for refs/stash is empty.
The reason is that the get_sha1() code path does not allow us
to suppress this message.
Pass the flags bitfield through get_sha1_with_context() so that
read_ref_at() can suppress the message.
Use get_sha1_with_context1() instead of get_sha1() in rev-parse
so that the --quiet flag is honored.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run `branch --merged`, we use prepare_revision_walk
with the merge-filter marked as UNINTERESTING. Any branch
tips that are marked UNINTERESTING after it returns must be
ancestors of that commit. As we iterate through the list of
refs to show, we check item->commit->object.flags to see
whether it was marked.
This interacts badly with --verbose, which will do a
separate walk to find the ahead/behind information for each
branch. There are two bad things that can happen:
1. The ahead/behind walk may get the wrong results,
because it can see a bogus UNINTERESTING flag leftover
from the merge-filter walk.
2. We may omit some branches if their tips are involved in
the ahead/behind traversal of a branch shown earlier.
The ahead/behind walk carefully cleans up its commit
flags, meaning it may also erase the UNINTERESTING
flag that we expect to check later.
We can solve this by moving the merge-filter state for each
ref into its "struct ref_item" as soon as we finish the
merge-filter walk. That fixes (2). Then we are free to clear
the commit flags we used in the walk, fixing (1).
Note that we actually do away with the matches_merge_filter
helper entirely here, and inline it between the revision
walk and the flag-clearing. This ensures that nobody
accidentally calls it at the wrong time (it is only safe to
check in that instant between the setting and clearing of
the global flag).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating with the stateless RPC mode, we will receive a nonce
issued by another instance of us that advertised our capability and
refs some time ago. Update the logic to check received nonce to
detect this case, compute how much time has passed since the nonce
was issued and report the status with a new environment variable
GIT_PUSH_CERT_NONCE_SLOP to the hooks.
GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The
hooks are free to decide how large a slop it is willing to accept.
Strictly speaking, the "nonce" is not really a "nonce" anymore in
the stateless RPC mode, as it will happily take any "nonce" issued
by it (which is protected by HMAC and its secret key) as long as it
is fresh enough. The degree of this security degradation, relative
to the native protocol, is about the same as the "we make sure that
the 'git push' decided to update our refs with new objects based on
the freshest observation of our refs by making sure the values they
claim the original value of the refs they ask us to update exactly
match the current state" security is loosened to accomodate the
stateless RPC mode in the existing code without this series, so
there is no need for those who are already using smart HTTP to push
to their repositories to be alarmed any more than they already are.
In addition, the server operator can set receive.certnonceslop
configuration variable to specify how stale a nonce can be (in
seconds). When this variable is set, and if the nonce received in
the certificate that passes the HMAC check was less than that many
seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS
(instead of "SLOP") and the received nonce value is given in
GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded
hook to check if the certificate we received is recent enough.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--signed" option received by "git push" is first passed to the
transport layer, which the native transport directly uses to notice
that a push certificate needs to be sent. When the transport-helper
is involved, however, the option needs to be told to the helper with
set_helper_option(), and the helper needs to take necessary action.
For the smart-HTTP helper, the "necessary action" involves spawning
the "git send-pack" subprocess with the "--signed" option.
Once the above all gets wired in, the smart-HTTP transport now can
use the push certificate mechanism to authenticate its pushes.
Add a test that is modeled after tests for the native transport in
t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test
Apache configuration to pass GNUPGHOME environment variable through.
As PassEnv would trigger warnings for an environment variable that
is not set, export it from test-lib.sh set to a harmless value when
GnuPG is not being used in the tests.
Note that the added test is deliberately loose and does not check
the nonce in this step. This is because the stateless RPC mode is
inevitably flaky and a nonce that comes back in the actual push
processing is one issued by a different process; if the two
interactions with the server crossed a second boundary, the nonces
will not match and such a check will fail. A later patch in the
series will work around this shortcoming.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to prevent a valid push certificate for pushing into an
repository from getting replayed in a different push operation, send
a nonce string from the receive-pack process and have the signer
include it in the push certificate. The receiving end uses an HMAC
hash of the path to the repository it serves and the current time
stamp, hashed with a secret seed (the secret seed does not have to
be per-repository but can be defined in /etc/gitconfig) to generate
the nonce, in order to ensure that a random third party cannot forge
a nonce that looks like it originated from it.
The original nonce is exported as GIT_PUSH_CERT_NONCE for the hooks
to examine and match against the value on the "nonce" header in the
certificate to notice a replay, but returned "nonce" header in the
push certificate is examined by receive-pack and the result is
exported as GIT_PUSH_CERT_NONCE_STATUS, whose value would be "OK"
if the nonce recorded in the certificate matches what we expect, so
that the hooks can more easily check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pre-receive and post-receive hooks were designed to be an
improvement over old style update and post-update hooks, which take
the update information on their command line and are limited by the
command line length limit. The same information is fed from the
standard input to pre/post-receive hooks instead to lift this
limitation. It has been mandatory for these new style hooks to
consume the update information fully from the standard input stream.
Otherwise, they would risk killing the receive-pack process via
SIGPIPE.
If a hook does not want to look at all the information, it is easy
to send its standard input to /dev/null (perhaps a niche use of hook
might need to know only the fact that a push was made, without
having to know what objects have been pushed to update which refs),
and this has already been done by existing hooks that are written
carefully.
However, because there is no good way to consistently fail hooks
that do not consume the input fully (a small push may result in a
short update record that may fit within the pipe buffer, to which
the receive-pack process may manage to write before the hook has a
chance to exit without reading anything, which will not result in a
death-by-SIGPIPE of receive-pack), it can lead to a hard to diagnose
"once in a blue moon" phantom failure.
Lift this "hooks must consume their input fully" mandate. A mandate
that is not enforced strictly is not helping us to catch mistakes in
hooks. If a hook has a good reason to decide the outcome of its
operation without reading the information we feed it, let it do so
as it pleases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 81c5cf7 (mailinfo: skip bogus UNIX From line inside
body, 2006-05-21), we have treated lines like ">From" in the body as
headers. This makes "git am" work for people who erroneously paste
the whole output from format-patch:
From 12345abcd...fedcba543210 Mon Sep 17 00:00:00 2001
From: them
Subject: [PATCH] whatever
into their email body (assuming that an mbox writer then quotes
"From" as ">From", as otherwise we would actually mailsplit on the
in-body line).
However, this has false positives if somebody actually has a commit
body that starts with "From "; in this case we erroneously remove
the line entirely from the commit message. We can make this check
more robust by making sure the line actually looks like a real mbox
"From" line.
Inspect the line that begins with ">From " a more carefully to only
skip lines that match the expected pattern (note that the datestamp
part of the format-patch output is designed to be kept constant to
help those who write magic(5) entries).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the interim protocol, we used to send the update commands even
though we already send a signed copy of the same information when
push certificate is in use. Update the send-pack/receive-pack pair
not to do so.
The notable thing on the receive-pack side is that it makes sure
that there is no command sent over the traditional protocol packet
outside the push certificate. Otherwise a pusher can claim to be
pushing one set of ref updates in the signed certificate while
issuing commands to update unrelated refs, and such an update will
evade later audits.
Finally, start documenting the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reusing the GPG signature check helpers we already have, verify
the signature in receive-pack and give the results to the hooks
via GIT_PUSH_CERT_{SIGNER,KEY,STATUS} environment variables.
Policy decisions, such as accepting or rejecting a good signature by
a key that is not fully trusted, is left to the hook and kept
outside of the core.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While signed tags and commits assert that the objects thusly signed
came from you, who signed these objects, there is not a good way to
assert that you wanted to have a particular object at the tip of a
particular branch. My signing v2.0.1 tag only means I want to call
the version v2.0.1, and it does not mean I want to push it out to my
'master' branch---it is likely that I only want it in 'maint', so
the signature on the object alone is insufficient.
The only assurance to you that 'maint' points at what I wanted to
place there comes from your trust on the hosting site and my
authentication with it, which cannot easily audited later.
Introduce a mechanism that allows you to sign a "push certificate"
(for the lack of better name) every time you push, asserting that
what object you are pushing to update which ref that used to point
at what other object. Think of it as a cryptographic protection for
ref updates, similar to signed tags/commits but working on an
orthogonal axis.
The basic flow based on this mechanism goes like this:
1. You push out your work with "git push --signed".
2. The sending side learns where the remote refs are as usual,
together with what protocol extension the receiving end
supports. If the receiving end does not advertise the protocol
extension "push-cert", an attempt to "git push --signed" fails.
Otherwise, a text file, that looks like the following, is
prepared in core:
certificate version 0.1
pusher Junio C Hamano <gitster@pobox.com> 1315427886 -0700
7339ca65... 21580ecb... refs/heads/master
3793ac56... 12850bec... refs/heads/next
The file begins with a few header lines, which may grow as we
gain more experience. The 'pusher' header records the name of
the signer (the value of user.signingkey configuration variable,
falling back to GIT_COMMITTER_{NAME|EMAIL}) and the time of the
certificate generation. After the header, a blank line follows,
followed by a copy of the protocol message lines.
Each line shows the old and the new object name at the tip of
the ref this push tries to update, in the way identical to how
the underlying "git push" protocol exchange tells the ref
updates to the receiving end (by recording the "old" object
name, the push certificate also protects against replaying). It
is expected that new command packet types other than the
old-new-refname kind will be included in push certificate in the
same way as would appear in the plain vanilla command packets in
unsigned pushes.
The user then is asked to sign this push certificate using GPG,
formatted in a way similar to how signed tag objects are signed,
and the result is sent to the other side (i.e. receive-pack).
In the protocol exchange, this step comes immediately before the
sender tells what the result of the push should be, which in
turn comes before it sends the pack data.
3. When the receiving end sees a push certificate, the certificate
is written out as a blob. The pre-receive hook can learn about
the certificate by checking GIT_PUSH_CERT environment variable,
which, if present, tells the object name of this blob, and make
the decision to allow or reject this push. Additionally, the
post-receive hook can also look at the certificate, which may be
a good place to log all the received certificates for later
audits.
Because a push certificate carry the same information as the usual
command packets in the protocol exchange, we can omit the latter
when a push certificate is in use and reduce the protocol overhead.
This however is not included in this patch to make it easier to
review (in other words, the series at this step should never be
released without the remainder of the series, as it implements an
interim protocol that will be incompatible with the final one).
As such, the documentation update for the protocol is left out of
this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous one for send-pack, make it easier and
cleaner to add to capability advertisement.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make a helper function to accept a line of a protocol message and
queue an update command out of the code from read_head_info().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This piece of code reads object names of shallow boundaries, not
old_sha1[], i.e. the current value the ref points at, which is to be
replaced by what is in new_sha1[].
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, we should have also allowed the first "shallow" to carry
the feature request trailer, but that is water under the bridge
now. This makes the next step to factor out the queuing of commands
easier to review.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An "update" command in the protocol exchange consists of 40-hex old
object name, SP, 40-hex new object name, SP, and a refname, but the
first instance is further followed by a NUL with feature requests.
The command structure, which has a flex-array member that stores the
refname at the end, was allocated based on the whole length of the
update command, without excluding the trailing feature requests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call the functions behind git prune-packed and git update-server-info
directly instead of using run_command(). This is shorter, easier and
quicker.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We form all of our directories in a strbuf, but never release it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fsck tries hard to detect missing objects, and will complain
(and exit non-zero) about any inter-object links that are
missing. However, it will not exit non-zero for any missing
ref tips, meaning that a severely broken repository may
still pass "git fsck && echo ok".
The problem is that we use for_each_ref to iterate over the
ref tips, which hides broken tips. It does at least print an
error from the refs.c code, but fsck does not ever see the
ref and cannot note the problem in its exit code. We can solve
this by using for_each_rawref and noting the error ourselves.
In addition to adding tests for this case, we add tests for
all types of missing-object links (all of which worked, but
which we were not testing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce CONFIG_REGEX_NONE as a more explicit sentinel value to say
"we do not want to replace any existing entry" and use it in the
implementation of "git config --add".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows "hash-object --stdin" to just hash any garbage into a
"loose object" that may not pass the standard object parsing check
or fsck, so that different kind of corrupt objects we may encounter
in the field can be imitated in our test suite. That would in turn
allow us to test features that catch these corrupt objects.
Note that "cat-file" may need to learn "--literally" option to allow
us peek into a truly broken object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of forcing callers of lower level functions write
(write_object ? HASH_WRITE_OBJECT : 0), prepare the flag to be
passed down in the callchain from the command line parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the knobs that affect helper functions called from
cmd_hash_object() were passed to them as parameters already, and the
only effect of having them as file-scope statics was to make the
reader wonder if the parameters are hiding the file-scope global
values by accident. Adjust their initialisation and make them
function-local variables.
The only exception was no_filters hash_stdin_paths() peeked from the
file-scope global, which was converted to a parameter to the helper
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Progress output from "git gc --auto" was visible in "git fetch -q".
* nd/fetch-pass-quiet-to-gc-child-process:
fetch: silence git-gc if --quiet is given
fetch: convert argv_gc_auto to struct argv_array
Add a few more places in "commit" and "checkout" that make sure
that the cache-tree is fully populated in the index.
* dt/cache-tree-repair:
cache-tree: do not try to use an invalidated subtree info to build a tree
cache-tree: Write updated cache-tree after commit
cache-tree: subdirectory tests
test-dump-cache-tree: invalid trees are not errors
cache-tree: create/update cache-tree on checkout
