* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 7e25437d35, reversing
changes made to 00624d608c.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few preliminary minor clean-ups in the area around submodules.
* sb/submodule-cleanup:
builtin/submodule--helper: remove stray new line
t7410: update to new style
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten the API to make it harder to misuse in-tree .gitmodules
file, even though it shares the same syntax with configuration
files, to read random configuration items from it.
* ao/config-from-gitmodules:
submodule-config: reuse config_from_gitmodules in repo_read_gitmodules
submodule-config: pass repository as argument to config_from_gitmodules
submodule-config: make 'config_from_gitmodules' private
submodule-config: add helper to get 'update-clone' config from .gitmodules
submodule-config: add helper function to get 'fetch' config from .gitmodules
config: move config_from_gitmodules to submodule-config.c
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
Add a helper function to make it clearer that retrieving 'update-clone'
configuration from the .gitmodules file is a special case supported
solely for backward compatibility purposes.
This change removes one direct use of 'config_from_gitmodules' for
options not strictly related to submodules: "submodule.fetchjobs" does
not describe a property of a submodule, but a behavior of other commands
when dealing with submodules, so it does not really belong to the
.gitmodules file.
This is in the effort to communicate better that .gitmodules is not to
be used as a mechanism to store arbitrary configuration in the
repository that any command can retrieve.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Misc leak plugging.
* sb/plug-misc-leaks:
sequencer.c: plug mem leak in git_sequencer_config
sequencer.c: plug leaks in do_pick_commit
submodule--helper: plug mem leak in print_default_remote
refs/packed-backend.c: close fd of empty file
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jc: no need for remote to be const char *]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
* maint-2.16:
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.15:
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.14:
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.13:
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
Submodule "names" come from the untrusted .gitmodules file,
but we blindly append them to $GIT_DIR/modules to create our
on-disk repo paths. This means you can do bad things by
putting "../" into the name (among other things).
Let's sanity-check these names to avoid building a path that
can be exploited. There are two main decisions:
1. What should the allowed syntax be?
It's tempting to reuse verify_path(), since submodule
names typically come from in-repo paths. But there are
two reasons not to:
a. It's technically more strict than what we need, as
we really care only about breaking out of the
$GIT_DIR/modules/ hierarchy. E.g., having a
submodule named "foo/.git" isn't actually
dangerous, and it's possible that somebody has
manually given such a funny name.
b. Since we'll eventually use this checking logic in
fsck to prevent downstream repositories, it should
be consistent across platforms. Because
verify_path() relies on is_dir_sep(), it wouldn't
block "foo\..\bar" on a non-Windows machine.
2. Where should we enforce it? These days most of the
.gitmodules reads go through submodule-config.c, so
I've put it there in the reading step. That should
cover all of the C code.
We also construct the name for "git submodule add"
inside the git-submodule.sh script. This is probably
not a big deal for security since the name is coming
from the user anyway, but it would be polite to remind
them if the name they pick is invalid (and we need to
expose the name-checker to the shell anyway for our
test scripts).
This patch issues a warning when reading .gitmodules
and just ignores the related config entry completely.
This will generally end up producing a sensible error,
as it works the same as a .gitmodules file which is
missing a submodule entry (so "submodule update" will
barf, but "git clone --recurse-submodules" will print
an error but not abort the clone.
There is one minor oddity, which is that we print the
warning once per malformed config key (since that's how
the config subsystem gives us the entries). So in the
new test, for example, the user would see three
warnings. That's OK, since the intent is that this case
should never come up outside of malicious repositories
(and then it might even benefit the user to see the
message multiple times).
Credit for finding this vulnerability and the proof of
concept from which the test script was adapted goes to
Etienne Stalmans.
Signed-off-by: Jeff King <peff@peff.net>
Add --dissociate option to add and update commands, both clone helper commands
that already have the --reference option --dissociate pairs with.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for introducing an abstraction around a collection of
refspecs (much like how a 'struct pathspec' is a collection of 'struct
pathspec_item's) rename the existing 'struct refspec' to 'struct
refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for performing a refactor on refspec related code, move
the refspec parsing logic into its own file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This aims to make git-submodule foreach a builtin. 'foreach' is ported to
the submodule--helper, and submodule--helper is called from
git-submodule.sh.
Helped-by: Brandon Williams <bmwill@google.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule status" did not check the symbolic revision name it
computed for the submodule HEAD is not the NULL, and threw it at
printf routines, which has been corrected.
* nd/submodule-status-fix:
submodule--helper: don't print null in 'submodule status'
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
The function compute_rev_name() can return NULL sometimes (e.g. right
after 'submodule init'). The current code makes 'submodule status'
print this:
19d97bf5af05312267c2e874ee6bcf584d9e9681 sha1collisiondetection ((null))
This ugly 'null' adds no value to the user using this command. More
importantly printf() on some platform can't handle NULL as a string
and will crash instead of printing '(null)'.
Check for this and skip printing this part (the alternative is
printing '(n/a)' or something but I think that is just noise).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule status" misbehaved on a submodule that has been
removed from the working tree.
* rs/status-with-removed-submodule:
submodule: check for NULL return of get_submodule_ref_store()
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
connect_work_tree_and_git_dir is used to connect a submodule worktree with
its git directory and vice versa after events that require a reconnection
such as moving around the working tree. As submodules can have nested
submodules themselves, we'd also want to fix the nested submodules when
asked to. Add an option to recurse into the nested submodules and connect
them as well.
As submodules are identified by their name (which determines their git
directory in relation to their superproject's git directory) internally
and by their path in the working tree of the superproject, we need to
make sure that the mapping of name <-> path is kept intact. We can do
that in the git-mv command by writing out the gitmodules file first
and then forcing a reload of the submodule config machinery.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables submodule_from_{name, path} to handle arbitrary repositories.
All callers just pass in the_repository, a later patch will pass in other
repos.
While at it remove the extern key word from the declarations.
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we can't find a ref store for a submodule then assume the latter
is not initialized (or was removed). Print a status line accordingly
instead of causing a segmentation fault by passing NULL as the first
parameter of refs_head_ref().
Reported-by: Jeremy Feusi <jeremy@feusi.co>
Reviewed-by: Stefan Beller <sbeller@google.com>
Initial-Test-By: Stefan Beller <sbeller@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduced in 2e612731b5 (submodule: port
submodule subcommand 'deinit' from shell to C, 2018-01-15), when
handling pathspecs that do not exist gracefully. This restores the
historic behavior of reporting the pathspec as unknown and returning
instead of reporting a bug.
Reported-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate the struct alternate_object_database and all its related
functions to the object store as these functions are easier found in
that header. The migration is just a verbatim copy, no need to
include the object store header at any C file, because cache.h includes
repository.h which in turn includes the object-store.h
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion: (45 commits)
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
completion: use __gitcomp_builtin in _git_worktree
completion: use __gitcomp_builtin in _git_tag
completion: use __gitcomp_builtin in _git_status
completion: use __gitcomp_builtin in _git_show_branch
completion: use __gitcomp_builtin in _git_rm
completion: use __gitcomp_builtin in _git_revert
completion: use __gitcomp_builtin in _git_reset
completion: use __gitcomp_builtin in _git_replace
remote: force completing --mirror= instead of --mirror
completion: use __gitcomp_builtin in _git_remote
completion: use __gitcomp_builtin in _git_push
completion: use __gitcomp_builtin in _git_pull
completion: use __gitcomp_builtin in _git_notes
completion: use __gitcomp_builtin in _git_name_rev
completion: use __gitcomp_builtin in _git_mv
completion: use __gitcomp_builtin in _git_merge_base
...
The same mechanism is used even for porting this submodule
subcommand, as used in the ported subcommands till now.
The function cmd_deinit in split up after porting into four
functions: module_deinit(), for_each_listed_submodule(),
deinit_submodule() and deinit_submodule_cb().
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port the submodule subcommand 'sync' from shell to C using the same
mechanism as that used for porting submodule subcommand 'status'.
Hence, here the function cmd_sync() is ported from shell to C.
This is done by introducing four functions: module_sync(),
sync_submodule(), sync_submodule_cb() and print_default_remote().
The function print_default_remote() is introduced for getting
the default remote as stdout.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message spans over 2 lines but the C concatenation does not add
the needed space between the two lines.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
GSoC.
* pc/submodule-helper:
submodule: port submodule subcommand 'status' from shell to C
submodule--helper: introduce for_each_listed_submodule()
submodule--helper: introduce get_submodule_displaypath()
