Brandon Casey correctly points out that we repack with -A without --prune
and with -a with --prune, so it is not just unreferenced loose objects
that are pruned away when the option is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a case insensitive file system, this test fails because git-diff
doesn't know if it is asking for the file "A" or the tag "a".
Adding "--" at the end of the ambiguous commands allows the test to
finish properly.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes --early-output a bit more advanced, and actually makes it
generate multiple "Final output:" headers as it updates things
asynchronously. I realize that the "Final output:" line is now illogical,
since it's not really final until it also says "done", but
It now _always_ generates a "Final output:" header in front of any commit
list, and that output header gives you a *guess* at the maximum number of
commits available. However, it should be noted that the guess can be
completely off: I do a reasonable job estimating it, but it is not meant
to be exact.
So what happens is that you may get output like this:
- at 0.1 seconds:
Final output: 2 incomplete
.. 2 commits listed ..
- half a second later:
Final output: 33 incomplete
.. 33 commits listed ..
- another half a second after that:
Final output: 71 incomplete
.. 71 commits listed ..
- another half second later:
Final output: 136 incomplete
.. 100 commits listed: we hit the --early-output limit, and
.. will only output 100 commits, and after this you'll not
.. see an "incomplete" report any more since you got as much
.. early output as you asked for!
- .. and then finally:
Final output: 73106 done
.. all the commits ..
The above is a real-life scenario on my current kernel tree after having
flushed all the caches.
Tested with the experimental gitk patch that Paul sent out, and by looking
at the actual log output (and verifying that my commit count guesses
actually match real life fairly well).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is really an uninteresting detail, and it just takes
attention away from the actual push updates and posssible
errors.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The proposed updates are already shown to the user by
send-pack, so there's no point. We continue to show errors,
since they are unexpected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the output of send-pack to match the new,
more terse fetch output. It looks like this:
To git://host.tld/path/to/repo
+ f3325dc...3b91d1c hasforce -> mirror/hasforce (forced update)
f3325dc..bb022dc master -> mirror/master
! [rejected] needsforce -> mirror/needsforce (non-fast forward)
* [new branch] newbranch -> mirror/newbranch
* [new tag] v1.0 -> v1.0
instead of:
updating 'refs/heads/mirror/hasforce' using 'refs/heads/hasforce'
from f3325dca9c4a34d74012c0e159254f454930cec7
to 3b91d1c310ca9d7b547b85466dd876e143498304
updating 'refs/heads/mirror/master' using 'refs/heads/master'
from f3325dca9c4a34d74012c0e159254f454930cec7
to bb022dc363d5c2aa9aa3026beb9706d44fbe1328
error: remote 'refs/heads/mirror/needsforce' is not an ancestor of
local 'refs/heads/needsforce'.
Maybe you are not up-to-date and need to pull first?
updating 'refs/heads/mirror/newbranch' using 'refs/heads/newbranch'
from 0000000000000000000000000000000000000000
to 3b91d1c310ca9d7b547b85466dd876e143498304
updating 'refs/tags/v1.0'
from 0000000000000000000000000000000000000000
to bb022dc363d5c2aa9aa3026beb9706d44fbe1328
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that we end up with an incorrect commit message
in this test after making changes to fix the clobber bug
in dcommit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our revision number sent to SVN is set to the last revision we
committed if we've made any previous commits in a dcommit
invocation.
Although our SVN Editor code uses the delta of two (old) trees
to generate information to send upstream, it'll still send
complete resultant files upstream; even if the tree they're
based against is out-of-date.
The combination of sending a file that does not include the
latest changes, but set with a revision number of a commit we
just made will cause SVN to accept the resultant file even if it
was generated against an old tree.
More trouble was caused when fixing this because we were
rebasing uncessarily at times. We used git-diff-tree to check
the imported SVN revision against our HEAD, not the last tree we
committed to SVN. The unnecessary rebasing caused merge commits
upstream to SVN to fail.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The provided name argument is always constant and valid in every
caller's context, so no need to have an array of PATH_MAX chars to copy
it into when a simple pointer will do. Unfortunately that means getting
rid of wascally wabbits too.
The 'error' field is also unused.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The throughput display needs a delay period before accounting and
displaying anything. Yet it might be called after some amount of data
has already been transferred. The display of total data is therefore
accounted late and therefore smaller than the reality.
Let's call display_throughput() with an absolute amount of transferred
data instead of a relative number, and let the throughput code find the
relative amount of data by itself as needed. This way the displayed
total is always exact.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file commit.c got quite large, but it does not have to be: the
code concerning pretty printing is pretty well contained. In fact,
this commit just splits it off into pretty.c, leaving commit.c with
just 672 lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sq_quote_buf() treats single-quotes and exclamation marks specially, but
it incorrectly parsed the input for single-quotes and backslashes.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just because there wasn't a test for --numbered isn't a good reason
not to test format.numbered. So now we test both.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format.numbered is a tri-state variable. Boolean values enable or
disable numbering by default and "auto" enables number when outputting
more than one patch.
--no-numbered (short: -N) will disable numbering.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible for the remote summary line to be displayed over the
local progress display line, and therefore that local progress gets
bumped to the next line. However, if the progress line is long enough,
it might not be entirely overwritten by the remote summary line. This
creates a messed up display such as:
remote: Total 310 (delta 160), reused 178 (delta 112)iB/s
Receiving objects: 100% (310/310), 379.98 KiB | 136 KiB/s, done.
So we have to clear the screen line before displaying the remote message
to make sure the local progress is not visible anymore on the first
line.
Yet some Git versions on the remote side might be sending updates to the
same line and terminate it with \r, and a separate packet with a single
\n might be sent later when the progress display is done. This means
the screen line must *not* be cleared in that case.
Since the sideband code already has to figure out line breaks in the
received packet to properly prepend the "remote:" prefix, we can easily
determine if the remote line about to be displayed is empty. Only when
it is not then a proper suffix is inserted before the \r or \n to clear
the end of the screen line.
Also some magic constants related to the prefix length have been
replaced with a variable, making it similar to the suffix length
handling. Since gcc is smart enough to detect that the variable is
constant there is no impact on the generated code.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds support for "--early-output[=n]" as a flag to the "git log"
family of commands. This allows GUI programs to state that they want to
get some output early, in order to be able to show at least something
quickly, even if the full output may take longer to generate.
If no count is specified, a default count of a hundred commits will be
used, although the actual numbr of commits output may be smaller
depending on how many commits were actually found in the first tenth of
a second (or if *everything* was found before that, in which case no
early output will be provided, and only the final list is made
available).
When the full list is generated, there will be a "Final output:" string
prepended to it, regardless of whether any early commits were shown or
not, so that the consumer can always know the difference between early
output and the final list.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.. by not using quite so much indirection.
This currently grows the "struct commit" a bit, which could be avoided by
using a union for "util" and "indegree" (the topo-sort used to use "util"
anyway, so you cannot use them together), but for now the goal of this was
to simplify, not optimize.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* jc/format-patch-encoding:
test format-patch -s: make sure MIME content type is shown as needed
format-patch -s: add MIME encoding header if signer's name requires so
* jn/gitweb:
gitweb: Use config file for repository description and URLs
gitweb: Read repo config using 'git config -z -l'
gitweb: Add tests for overriding gitweb config with repo config
gitweb: Use href(-replay=>1, action=>...) to generate alternate views
gitweb: Use href(-replay=>1, page=>...) to generate pagination links
gitweb: Easier adding/changing parameters to current URL
gitweb: Remove CGI::Carp::set_programname() call from t9500 gitweb test
gitweb: Add 'status_str' to parse_difftree_raw_line output
gitweb: Always set 'from_file' and 'to_file' in parse_difftree_raw_line
When both GIT_DIR and GIT_WORK_TREE are set, and
setup_git_directory_gently() changes the current working
directory accordingly, it should also set inside_work_tree = 1.
Without this, work_tree handling code in setup_git_directory()
will be activated. If you stay in root work tree (no prefix),
it does not harm. It does if you work from a subdirectory though.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the function update_index_from_diff() (which is the
callback function we give do_diff_cache()) is to update those index
entries which differ from the given commit.
Since do_diff_cache() plays games with the in-memory index, this function
discarded the cache and reread it.
Then, back in the function read_from_tree() we wrote the index.
Of course, this broke down when there were no changes and
update_index_from_diff() was not called, and therefore the mangled index
was not discarded.
The solution is to move the index writing into the function
update_index_from_diff().
Noticed by Björn Steinbrink.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn <cmd> --help" gave options in the order they were found in a
Perl hash, which meant "randomly" to humans.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"-q" is the very first option described in the git-fetch manpage, and it
isn't supported.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids to launch the pager when git blame fails for any reason.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation states for the -u option that underscores in tag and
branch names are converted to dots, but this was actually implemented
for the tag names only.
Kurt Roeckx reported this through
http://bugs.debian.org/446495
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term "ancestor" is a bit more intuitive (and more consistent with
the documentation) than the term "strict subset".
Also, remove superfluous "ref", capitalize, and add some carriage
returns, changing:
error: remote 'refs/heads/master' is not a strict subset of local ref 'refs/heads/master'. maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
to:
error: remote 'refs/heads/master' is not an ancestor of
local 'refs/heads/master'.
Maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the fetch output much more terse and prettier on a 80 column
display, based on a consensus reached on the mailing list. Here's an
example output:
Receiving objects: 100% (5439/5439), 1.60 MiB | 636 KiB/s, done.
Resolving deltas: 100% (4604/4604), done.
From git://git.kernel.org/pub/scm/git/git
! [rejected] html -> origin/html (non fast forward)
136e631..f45e867 maint -> origin/maint (fast forward)
9850e2e..44dd7e0 man -> origin/man (fast forward)
3e4bb08..e3d6d56 master -> origin/master (fast forward)
fa3665c..536f64a next -> origin/next (fast forward)
+ 4f6d9d6...768326f pu -> origin/pu (forced update)
* [new branch] todo -> origin/todo
Some portions of this patch have been extracted from earlier proposals
by Jeff King and Shawn Pearce.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow to use configuration variable gitweb.description for repository
description if there is no $GIT_DIR/description file, and multivalued
configuration variable gitweb.url for URLs of a project (to clone or
fetch from) if there is no $GIT_DIR/cloneurl file.
While repository description is shown in the projects list page, so it
is better to use file and not config variable for performance, it is I
think better to use gitweb.url for URLs (as it is shown only on
project summary page).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change git_get_project_config to run git-config only once per
repository, without changing its signature (its calling convention).
This means for example that it returns 'true' or 'false' when called
with second argument '--bool', and not true or false value.
Instead of calling 'git config [<type>] --get gitweb.<key>' once for
each config variable, call 'git config -z -l' only once, parsing and
saving its output to %config variable. This makes possible to add new
per repository configuration without paying cost of forking once per
variable checked. We can now allow repository description and
repository URLs to be stored in config file without badly affecting
gitweb performance.
For now only configuration variables for 'gitweb' section are stored.
Multiple values for single configuration variable are stored as
anonymous array reference; configuration variable with no value is
stored as undef.
Converting configuration variable values to boolean or integer value
are done in Perl. Results differ from git-config in the fact that no
conversion error is ever raised. For boolean values no value, 'true'
(any case) and 'false' (any case) are considered true, numbers are
true if not zero; all other values (even invalid for bool) are
considered false. For integer values value suffix of 'k', 'm', or 'g'
following decimal number will cause the value to be multiplied by
1024, 1048576, or 1073741824; other values are returned as-is, only
whitespace stripped.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make blame view and snapshot support overridable by repository
config. Test tree view with both features disabled, and with both
features enabled.
Test with features enabled also tests multiple formats snapshot
support (in tree view).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new whitespace error type, "indent-with-non-tab".
The error is about starting a line with 8 or more SP, instead of
indenting it with a HT.
This is not enabled by default, as some projects employ an
indenting policy to use only SPs and no HTs.
The kernel folks and git contributors may want to enable this
detection with:
[core]
whitespace = indent-with-non-tab
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces core.whitespace configuration variable that lets
you specify the definition of "whitespace error".
Currently there are two kinds of whitespace errors defined:
* trailing-space: trailing whitespaces at the end of the line.
* space-before-tab: a SP appears immediately before HT in the
indent part of the line.
You can specify the desired types of errors to be detected by
listing their names (unique abbreviations are accepted)
separated by comma. By default, these two errors are always
detected, as that is the traditional behaviour. You can disable
detection of a particular type of error by prefixing a '-' in
front of the name of the error, like this:
[core]
whitespace = -trailing-space
This patch teaches the code to output colored diff with
DIFF_WHITESPACE color to highlight the detected whitespace
errors to honor the new configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
