To determine the where to place the split when repacking with the
'--geometric' option, split_pack_geometry() assigns the "split" variable
and then decrements it in a loop.
It would be equivalent (and more readable) to assign the split to the
loop position after exiting the loop, so do that instead.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't currently have a test that demonstrates the non-idempotent
behavior of 'git repack --geometric' with loose objects, so add one here
to make sure we don't regress in this area.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0fabafd0b9 (builtin/repack.c: add '--geometric' option, 2021-02-22),
the 'git repack --geometric' code aborts early when there is zero or one
pack.
When there are no packs, this code does the right thing by placing the
split at "0". But when there is exactly one pack, the split is placed at
"1", which means that "git repack --geometric" (with any factor)
repacks all of the objects in a single pack.
This is wasteful, and the remaining code in split_pack_geometry() does
the right thing (not repacking the objects in a single pack) even when
only one pack is present.
Loosen the guard to only stop when there aren't any packs, and let the
rest of the code do the right thing. Add a test to ensure that this is
the case.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some early changes in the 2.31 cycle to optimize some setup
in diffcore-rename.c[1], some later changes to measure performance[2],
and finally some significant changes to improve rename detection
performance. The final one was merged with the note
Performance optimization work on the rename detection continues.
That works for the commit log, but feels misleading as a release note
since all the changes were within one cycle. Simplify this to just
Performance improvements for rename detection.
The former wording could be seen as hinting that more performance
improvements will come in 2.32, which is true, but we can just cover
those in the 2.32 release notes when the time comes.
[1] a5ac31b5b1 (Merge branch 'en/diffcore-rename', 2021-01-25)
[2] d3a035b055 (Merge branch 'en/merge-ort-perf', 2021-02-11)
[3] 12bd17521c (Merge branch 'en/diffcore-rename', 2021-03-01)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around platforms whose open() is reported to return EINTR (it
shouldn't, as we do our signals with SA_RESTART).
* jk/open-returns-eintr:
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
Makefile: add OPEN_RETURNS_EINTR knob
* 'master' of github.com:git/git: (63 commits)
Git 2.31-rc1
Hopefully the last batch before -rc1
Revert "commit-graph: when incompatible with graphs, indicate why"
read-cache: make the index write buffer size 128K
dir: fix malloc of root untracked_cache_dir
commit-graph.c: display correct number of chunks when writing
doc/reftable: document how to handle windows
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
...
This commit causes breakage on macOS, or in fact any platform using
older versions of Tcl. Revert it.
* py/revert-commit-comments:
Revert "git-gui: remove lines starting with the comment character"
This reverts commit b9a43869c9.
This commit causes breakage on macOS (10.13). It causes errors on
startup and completely breaks the commit functionality. There are two
main problems. First, it uses `string cat` which is not supported on
older Tcl versions. Second, it does a half close of the bidirectional
pipe to git-stripspace which is also not supported on older Tcl
versions.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Although `test -f` has the same functionality as test_path_is_file(), in
the case where test_path_is_file() fails, we get much better debugging
information.
Replace `test -f` with test_path_is_file so that future developers
will have a better experience debugging these test cases.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence, on a case-insensitive file system,
(strictly speeking with core.ignorecase=true)
leads to an assertion failure and leaves .git/index.lock behind.
git init
echo foo >foo
git add foo
git mv foo FOO
git mv foo bar
This regression was introduced in Commit 9b906af657,
"git-mv: improve error message for conflicted file"
The bugfix is to change the "file exist case-insensitive in the index"
into the correct "file exist (case-sensitive) in the index".
This avoids the "assert" later in the code and keeps setting up the
"ce" pointer for ce_stage(ce) done in the next else if.
This fixes
https://github.com/git-for-windows/git/issues/2920
Reported-By: Dan Moseley <Dan.Moseley@microsoft.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the hash-transition, git can operate on more than just SHA-1
repositories. Replace "sha1"-specific documentation with hash-agnostic
terminology.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In modern documentation, args, placeholders and filenames are
monospaced. Apply monospace formatting to these objects.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Raise the buffer size used when writing the index file out from
(obviously too small) 8kB to (clearly sufficiently large) 128kB.
* ns/raise-write-index-buffer-size:
read-cache: make the index write buffer size 128K
The logic to handle "trailer" related placeholders in the
"--format=" mechanisms in the "log" family and "for-each-ref"
family is getting unified.
* hv/trailer-formatting:
ref-filter: use pretty.c logic for trailers
pretty.c: capture invalid trailer argument
pretty.c: refactor trailer logic to `format_set_trailers_options()`
t6300: use function to test trailer options
Test script modernization.
* sv/t7001-modernize:
t7001: use `test` rather than `[`
t7001: use here-docs instead of echo
t7001: put each command on a separate line
t7001: use '>' rather than 'touch'
t7001: avoid using `cd` outside of subshells
t7001: remove whitespace after redirect operators
t7001: modernize subshell formatting
t7001: remove unnecessary blank lines
t7001: indent with TABs instead of spaces
t7001: modernize test formatting
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
The common code to deal with "chunked file format" that is shared
by the multi-pack-index and commit-graph files have been factored
out, to help codepaths for both filetypes to become more robust.
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
Performance optimization work on the rename detection continues.
* en/diffcore-rename:
merge-ort: call diffcore_rename() directly
gitdiffcore doc: mention new preliminary step for rename detection
diffcore-rename: guide inexact rename detection based on basenames
diffcore-rename: complete find_basename_matches()
diffcore-rename: compute basenames of source and dest candidates
t4001: add a test comparing basename similarity and content similarity
diffcore-rename: filter rename_src list when possible
diffcore-rename: no point trying to find a match better than exact
Preliminary changes to fsmonitor integration.
* jh/fsmonitor-prework:
fsmonitor: refactor initialization of fsmonitor_last_update token
fsmonitor: allow all entries for a folder to be invalidated
fsmonitor: log FSMN token when reading and writing the index
fsmonitor: log invocation of FSMonitor hook to trace2
read-cache: log the number of scanned files to trace2
read-cache: log the number of lstat calls to trace2
preload-index: log the number of lstat calls to trace2
p7519: add trace logging during perf test
p7519: move watchman cleanup earlier in the test
p7519: fix watchman watch-list test on Windows
p7519: do not rely on "xargs -d" in test
Each %(describe) placeholder is expanded using a separate git describe
call. Their outputs depend on the tags present at the time, so there's
no consistency guarantee. Document that fact.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that the test is covering both describable and
undescribable commits.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit c85eec7fc3, as
it is a bit overzealous, we are in prerelease freeze, and we want
to have enough time to get this right and cook in 'next'.
cf. <8735xgkvuo.fsf@evledraar.gmail.com>
We've had mixed reports on whether the latest release of macOS needs
this Makefile knob set. In most reported cases, there's antivirus
software running (which one might imagine could cause an open() call to
be delayed). However, one of the (off-list) reports I've gotten
indicated that it happened on an otherwise clean install of Big Sur.
Since the symptom is so bad (checkout randomly fails to write several
fails when the progress meter kicks in), and since the workaround is so
lightweight (if we don't see EINTR, it's just an extra conditional
check), let's just turn it on by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reference-transaction hook doesn't clearly document its scope and
what values it receives as input. Document it to make it less surprising
and clearly delimit its (current) scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The githooks(5) documentation states in several places that the hook
will receive a SHA-1 or hashes of 40 characters length. Given that we're
transitioning to a world where both SHA-1 and SHA-256 are supported,
this is inaccurate.
Fix the issue by replacing mentions of SHA-1 with "object name" and not
explicitly mentioning the hash size.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir_rename_counts has a mapping of a mapping, in particular, it has
old_dir => { new_dir => count }
We want a simple mapping of
old_dir => new_dir
based on which new_dir had the highest count for a given old_dir.
Compute this and store it in dir_rename_guess.
This is the final piece of the puzzle needed to make our guesses at
which directory files have been moved to when basenames aren't unique.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 12.775 s ± 0.062 s 12.596 s ± 0.061 s
mega-renames: 188.754 s ± 0.284 s 130.465 s ± 0.259 s
just-one-mega: 5.599 s ± 0.019 s 3.958 s ± 0.010 s
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are using dir_rename_counts to count the number of other directories
that files within a directory moved to. We only need this information
for directories that disappeared, though, so we can return early from
update_dir_rename_counts() for other paths.
If dirs_removed is passed to diffcore_rename_extended(), then it
provides the relevant bits of information for us to limit this counting
to relevant dirs. If dirs_removed is not passed, we would need to
compute some replacement in order to do this limiting. Introduce a new
info->relevant_source_dirs variable for this purpose, even though at
this stage we will only set it to dirs_removed for simplicity.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
