block-sha1/ is fast on most known platforms. Clarify the Makefile to
be less misleading about that.
Early versions of block-sha1/ explicitly relied on fast htonl() and
fast 32-bit loads with arbitrary alignment. Now it uses those on some
arches but the default behavior is byte-at-a-time access for the sake
of arches like ARM, Alpha, and their kin and it is still pretty fast
on these arches (fast enough to supersede the mozilla SHA1
implementation and the hand-written ARM assembler implementation that
were bundled before).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I invoke "make block-sha1/sha1.s", 'make' runs $(CC) -S without
specifying where it should put its output and the output ends up in
./sha1.s. Confusing.
Add an -o option to the .s rule to fix this. We were already doing
that for most compiler invocations but had forgotten it for the
assembler listings.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a reduced but still useful sibling of the Automake's
"automatic Makefile rebuild" feature. It's important to note that
we take care to enable the new rules only if the tree that has already
be configured with './configure', so that users relying on manual
configuration won't be negatively impacted.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Those filed hold variables, settings and information set by the
configuration process run by './configure'; in Autotools-based
build system that kind of stuff should only be removed by
"make distclean". Having it removed by "make clean" is not only
inconsistent, but causes real confusion for that part of the Git
audience that is used to the Autotools semantics; for example,
an autotools old-timer that has run:
./configure --prefix /opt/git
in the past, without running "make distclean" afterwards, would
expect a "make install" issued after a "make clean" to rebuild and
install git in '/opt/git'; but with the current behaviour, the
"make clean" invocation removes (among the other things) the file
'config.mak.autogen', so that the "make install" falls back to the
default prefix of '$HOME', thus installing git in the user's home
directory -- definitely unexpected.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tightens dependency rules to avoid unnecessary recompilation, and
cleans up our Makefile in general.
* jn/makefile-cleanup:
Makefile: document ground rules for target-specific dependencies
Makefile: move GIT-VERSION-FILE dependencies closer to use
Makefile: build instaweb similar to other scripts
Makefile: update scripts when build-time parameters change
Makefile: do not replace @@GIT_VERSION@@ in shell scripts
Makefile: split prefix flags from GIT-CFLAGS
Makefile: be silent when only GIT_USER_AGENT changes
Makefile: split GIT_USER_AGENT from GIT-CFLAGS
Makefile: do not replace @@GIT_USER_AGENT@@ in scripts
Makefile: apply dependencies consistently to sparse/asm targets
Makefile: do not have git.o depend on common-cmds.h
Makefile: fold XDIFF_H and VCSSVN_H into LIB_H
Makefile: fold MISC_H into LIB_H
Makefile: sort LIB_H list
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
Expose the credential API to scripted Porcelain writers.
* mm/credential-plumbing:
git-remote-mediawiki: update comments to reflect credential support
git-remote-mediawiki: add credential support
git credential fill: output the whole 'struct credential'
add 'git credential' plumbing command
On Cygwin, the platform pread(3) is not thread safe, just like our
own compat/ emulation, and cannot be used in the index-pack program.
* rj/platform-pread-may-be-thread-unsafe:
index-pack: Disable threading on cygwin
When a source file makes use of a makefile variable, there should be a
corresponding dependency on a file that changes when that variable
changes to ensure the build output is not left stale when the variable
changes.
Document this, even though we are not following the rule perfectly
yet. Based on an explanation from Jeff King.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a list of all of the targets which depend on
GIT-VERSION-FILE, but it can be quite far from the actual
point where the targets actually use $(GIT_VERSION). This
can make it hard to verify that each use of $(GIT_VERSION)
has a matching dependency.
This patch moves the dependency closer to the actual build
instructions, which makes verification easier. This also
fixes the generation of "configure", which did not properly
mark the dependency.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instaweb would not properly rebuild if the build-time
parameters changed. Fix this by depending on the
GIT-SCRIPT-DEFINES meta-file and using $(cmd_munge_script)
like all the other shell scripts. This requires adding a few
new parametres to cmd_munge_script, but that doesn't hurt
existing scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, running:
make SHELL_PATH=/bin/bash &&
make SHELL_PATH=/bin/sh
will not rebuild any shell scripts in the second command,
leading to incorrect results when building from an unclean
working directory.
This patch introduces a new dependency meta-file to notice
the change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No shell script actually uses the replacement (it is used in
some perl scripts, but cmd_munge_script only handles shell
scripts). We can also therefore drop the dependency on
GIT-VERSION-FILE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the build targets do not care about the setting of
$prefix (or its derivative variables), but will be rebuilt
if the prefix changes. For most setups this doesn't matter
(they set prefix once and never change it), but for a setup
which puts each branch or version in its own prefix, this
unnecessarily causes a full rebuild whenever the branc is
changed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid noise during builds, unlike the GIT-CFLAGS rule which prints
"* new build flags or prefix" so the operator knows why all files are
being rebuilt when it changes, GIT-USER-AGENT generation is silent.
If this code breaks and a target depending on GIT-USER-AGENT ends up
being rebuilt when it shouldn't be, the full dependency chain can be
retrieved with "make --debug=b".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default user-agent depends on the GIT_VERSION, which
means that anytime you switch versions, it causes a full
rebuild. Instead, let's split it out into its own file and
restrict the dependency to version.o.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No scripts actually care about this replacement. This was
erroneously added by 42dcbb7 (version: add git_user_agent function,
2012-06-02).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a C file "foo.c" depends on a generated header file, we
note the dependency for the "foo.o" target. However, we
should also note it for other targets that are built from
foo.c, like "foo.sp" and "foo.s". These tend to be missed
because the latter two are not part of the default build,
and are typically built after a regular build which will
generate the header. Let's be consistent about including
them in dependencies.
This also makes us more consistent with nearby lines which
tack on EXTRA_CPPFLAGS when building certain files. These
flags may sometimes require extra dependencies to be added
(e.g., like GIT-VERSION-FILE; this is not the case for any
of the updated lines in this patch, but it is establishing a
style that will be used in later patches). Technically the
".sp" and ".s" targets do not care about these dependencies,
because they are force-built (".sp" because it is a phony
target, and ".s" because we explicitly force a rebuild).
Since the blocks in question are about communicating "things
built from foo.c depend on these flags", it frees the reader
from having to know or care more about how those targets are
implemented, and why it is OK for only "foo.o" to depend on
GIT-VERSION-FILE while "foo.sp" and "foo.s" both are
impacted by $(GIT_VERSION). And it helps future-proof us if
those force-build details should ever change.
This patch explicitly does not update the static header
dependencies used when COMPUTED_HEADER_DEPENDENCIES is off.
They are similar to the GIT-VERSION-FILE case above, in that
technically "foo.s" would depend on its included headers,
but it is irrelevant because we force-build it anyway. So it
would be tempting to update them in the same way (for
readability and future-proofing). However, those rules are
meant as a fallback to the computed header dependencies,
which do not handle ".s" and ".sp" at all (and are a much
harder problem to solve, as gcc is the one generating those
dependency lists).
So let's leave that harder problem until (and if) somebody
wants to change the ".sp" and ".s" rules, and keep the
static header dependencies consistent with the computed
ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This dependency has been stale since 70827b1 (Split up
builtin commands into separate files from git.c, 2006-04-21).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like MISC_H (see previous commit), there is no reason to track
xdiff and vcs-svn headers separately from the rest of the headers.
The only purpose of these variables is to keep track of recompilation
dependencies.
As a pleasant side effect, folding these into LIB_H lets us stop
tracking GIT_OBJS and VCSSVN_TEST_OBJS separately from the list of all
OBJECTS.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Cygwin implementation of pread() is not thread-safe since, just
like the emulation provided by compat/pread.c, it uses a sequence of
seek-read-seek calls. In order to avoid failues due to thread-safety
issues, commit b038a61 disables threading when NO_PREAD is defined.
(ie when using the emulation code in compat/pread.c).
We introduce a new build variable, NO_THREAD_SAFE_PREAD, which allows
use to disable the threaded index-pack code on cygwin, in addition to
the above NO_PREAD case.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The credential API is in C, and not available to scripting languages.
Expose the functionalities of the API by wrapping them into a new
plumbing command "git credentials".
In other words, replace the internal "test-credential" by an official Git
command.
Most documentation writen by: Jeff King <peff@peff.net>
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr>
Signed-off-by: Kim Thuat Nguyen <Kim-Thuat.Nguyen@ensimag.imag.fr>
Signed-off-by: Javier Roucher Iglesias <Javier.Roucher-Iglesias@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We no longer use AsciiDoc7 syntax in our documentation and favor a
more modern style.
* jk/no-more-asciidoc7:
docs: drop antique comment from Makefile
docs: drop asciidoc7compatible flag
We used to always default to "man" format even on platforms where
"man" viewer is not widely available.
* vr/help-per-platform:
help: use HTML as the default help format on Windows
We keep a list of most of the header files in LIB_H, but
some are split out into MISC_H. The original point
of LIB_H was that it would force recompilation of C files
when any of the library headers changed. It was
over-encompassing, since not all C files included all of the
library headers; this made it simple to maintain, but meant
that we sometimes recompiled when it was not necessary.
Over time, some new headers were omitted from LIB_H, and
rules were added to the Makefile for a few specific targets
to explicitly depend on them. This avoided some unnecessary
recompilation at the cost of having to maintain the
dependency list of those targets manually (e.g., d349a03).
Later, we needed a complete list of headers from which we
should extract strings to localized. Thus 1b8b2e4 introduced
MISC_H to mention all header files not included in LIB_H,
and the concatenation of the two lists is fed to xgettext.
Headers mentioned as dependencies must also be manually
added to MISC_H to receive the benefits of localization.
Having to update multiple locations manually is a pain and
has led to errors. For example, see "git log -Swt-status.h
Makefile" for some back-and-forth between the two locations.
Or the fact that column.h was never added to MISC_H, and
therefore was not localized (which is fixed by this patch).
Moreover, the benefits of keeping these few headers out of
LIB_H is not that great, for two reasons:
1. The better way to do this is by auto-computing the
dependencies, which is more accurate and less work to
maintain. If your compiler supports it, we turn on
computed header dependencies by default these days. So
these manual dependencies are used only for people who
do not have gcc at all (which increases the chance of
them becoming stale, as many developers will never even
use them).
2. Even if you do not have gcc, the manual header
dependencies do not help all that much. They obviously
cannot help with an initial compilation (since their
purpose is to avoid unnecessary recompilation when a
header changes), which means they are only useful when
building a new version of git in the working tree that
held an existing build (e.g., after checkout or during a
bisection). But since a change of a header in LIB_H
will force recompilation, and given that the vast
majority of headers are in LIB_H, most version changes
will result in a full rebuild anyway.
Let's just fold MISC_H into LIB_H and get rid of these
manual rules. The worst case is some extra compilation, but
even that is unlikely to matter due to the reasons above.
The one exception is that we should keep common-cmds.h
separate. Because it is generated, the computed dependencies
do not handle it properly, and we must keep separate
individual dependencies on it. Let's therefore rename MISC_H
to GENERATED_H to make it more clear what should go in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was mostly sorted already, but put things like
"cache-tree.h" after "cache.h", even though "-" comes before
"." (at least in the C locale). This will make it easier to
keep the list sorted later by piping it through "sort".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git help $cmd' is run without a format option (e.g. -w), the
'man' format is always used. On some platforms, however, manual page
viewers are not often available.
Introduce DEFAULT_HELP_FORMAT make variable in order to allow the
default format configurable at compile time, and set it to HTML when
compiling on Windows (but not Cygwin).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means we will respect the GIT_USER_AGENT build-time
configuration and run-time environment variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is basically a fancy way of saying "git/$GIT_VERSION",
except that it is overridable at build-time and through the
environment. Which means that people who don't want to
advertise their git version (for privacy or security
reasons) can tweak it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The global git_version_string currently lives in git.c, but
doesn't have anything to do with the git wrapper. Let's move
it into its own file, where it will be more appropriate to
build more version-related functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 20fc9bc (Set HTTP user agent to git/GIT_VERSION, 2006-04-04),
http.o started recording GIT_VERSION, but http.o wasn't added
to the list of files that depends on GIT-VERSION-FILE.
Fix this, so mofications to GIT-VERSION-FILE will result in an
updated user-agent string.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we made the switch to supporting asciidoc 8 in 4c7100a
(Documentation: adjust to AsciiDoc 8, 2007-06-14), we were
able to leave most of the documentation intact by defining
asciidoc7compatible.
Since commit 6cf378f (docs: stop using asciidoc no-inline-literal,
2012-04-26), we don't support versions of asciidoc older
than 8.4.1, which is when inline literals were introduced.
Therefore there is not much point in keeping our
documentation compatible with asciidoc 7.
So we are now free to drop the asciidoc7compatible flag and
update the documentation itself to assume asciidoc8.
Fortunately, doing the latter is very easy; we weren't using
any of the constructs impacted by asciidoc7compatible, so
there are no changes to make.
The reason is somewhat subtle. The asciidoc7compatible
affects only super/sub-scripts ("^" and "~") and index
terms. We don't use the latter at all. Nor we do we use the
former, but we did have to protect them from accidental
expansion in constructs like "rev^1". However, all of our
uses of "~" and "^" are either in code blocks (which are
rendered literally), or inside backticks. Prior to 6cf378f,
backticks were not inline literals, and needed proper
quoting. But post-6cf378f, we don't have to worry whether we
are using the old or new rules, as those characters are not
interpreted at all in either case.
I verified that the result of "make install-html
install-man" is identical before and after this patch on
asciidoc 8.6.7.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
Your build platform may support hardlinks but you may prefer not to use
them, e.g. when installing to DESTDIR to make a tarball and untarring on
a filesystem that has poor support for hardlinks.
The Makefile in git-gui project may need to learn to honor the same
setting; it unconditionally creates git-citool by hardlinking git-gui.
* jc/install-no-hardlinks:
Makefile: NO_INSTALL_HARDLINKS
This puts delta resolving on each base on a separate thread, one base
cache per thread. Per-thread data is grouped in struct thread_local.
When running with nr_threads == 1, no pthreads calls are made. The
system essentially runs in non-thread mode.
An experiment on a Xeon 24 core machine with git.git shows that
performance does not increase proportional to the number of cores. So
by default, we use maximum 3 cores. Some numbers with --threads from 1
to 16:
1..4
real 0m8.003s 0m5.307s 0m4.321s 0m3.830s
user 0m7.720s 0m8.009s 0m8.133s 0m8.305s
sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s
5..8
real 0m3.727s 0m3.604s 0m3.332s 0m3.369s
user 0m9.361s 0m9.817s 0m9.525s 0m9.769s
sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s
9..12
real 0m3.036s 0m3.139s 0m3.177s 0m2.961s
user 0m8.977s 0m10.205s 0m9.737s 0m10.073s
sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s
13..16
real 0m2.985s 0m2.894s 0m2.975s 0m2.971s
user 0m9.825s 0m10.573s 0m10.833s 0m11.361s
sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s
On an Intel dual core and linux-2.6.git
1..4
real 2m37.789s 2m7.963s 2m0.920s 1m58.213s
user 2m28.415s 2m52.325s 2m50.176s 2m41.187s
sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s
Thanks Ramsay Jones for troubleshooting and support on MinGW platform.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Your filesystem may support hardlinks, but you may choose not to use them
when installing git-foo builtins and favor symblic links or copies for
whatever reason.
The installation procedure of git-gui/ directory is not touched with this
patch and git-citool still ends up being a hardlink to git-gui, but it
needs to be addressed separately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tend to keep long lists sorted (extensions are not taken into
account), which helps spot a name easily by eye. Rearrange a few
items so these lists remain sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
Use word-at-a-time comparison to find end of line or NUL (end of buffer),
borrowed from the linux-kernel discussion.
By Thomas Rast
* tr/xdiff-fast-hash:
xdiff: choose XDL_FAST_HASH code on sizeof(long) instead of __WORDSIZE
xdiff: load full words in the inner loop of xdl_hash_record
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
Trivially shrinks the on-disk size of the index file to save both I/O and
checksum overhead.
The topic should give a solid base to build on further updates, with the
code refactoring in its earlier parts, and the backward compatibility
mechanism in its later parts.
* jc/index-v4:
index-v4: document the entry format
unpack-trees: preserve the index file version of original
update-index: upgrade/downgrade on-disk index version
read-cache.c: write prefix-compressed names in the index
read-cache.c: read prefix-compressed names in index on-disk version v4
read-cache.c: move code to copy incore to ondisk cache to a helper function
read-cache.c: move code to copy ondisk to incore cache to a helper function
read-cache.c: report the header version we do not understand
read-cache.c: make create_from_disk() report number of bytes it consumed
read-cache.c: allow unaligned mapping of the index file
cache.h: hide on-disk index details
varint: make it available outside the context of pack
A column option string consists of many token separated by either
a space or a comma. A token belongs to one of three groups:
- enabling: always, never and auto
- layout mode: currently plain (which does not layout at all)
- other future tuning flags
git-column can be used to pipe output to from a command that wants
column layout, but not to mess with its own output code. Simpler output
code can be changed to use column layout code directly.
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also marks most common commands' synopsis for translation
so that "git help" gives a friendly listing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
Setting up a revision traversal with many starting points was inefficient
as these were placed in a date-order priority queue one-by-one.
By René Scharfe (3) and Junio C Hamano (1)
* rs/commit-list-sort-in-batch:
mergesort: rename it to llist_mergesort()
revision: insert unsorted, then sort in prepare_revision_walk()
commit: use mergesort() in commit_list_sort_by_date()
add mergesort() for linked lists
Make it easier for distros to document custom pager and editor they
used when building their binary releases in "git var" documentation.
By Jonathan Nieder
* jn/debian-customizes-default-editor:
var doc: advertise current DEFAULT_PAGER and DEFAULT_EDITOR settings
var doc: default editor and pager are configurable at build time
Translation markers may be present in header files too. Make sure we
don't miss any.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a generic bottom-up mergesort implementation for singly linked
lists. It was inspired by Simon Tatham's webpage on the topic[1], but
not so much by his implementation -- for no good reason, really, just a
case of NIH.
[1] http://www.chiark.greenend.org.uk/~sgtatham/algorithms/listsort.html
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the default pager and editor chosen at compile time in the
git-var(1) manpage so users curious about what command _this_ copy of
git will fall back to when EDITOR, VISUAL, and PAGER are unset can
find the answer quickly.
In builds leaving those settings uncustomized, this patch makes the
manpage continue to say "usually vi" and "usually less" so the
formatted documentation is usable for a wide audience including users
of custom builds that change those settings. If you would like your
copy of the docs to be less noncommittal, you will need to set
DEFAULT_PAGER=less and DEFAULT_EDITOR=vi explicitly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redo the hashing loop in xdl_hash_record in a way that loads an entire
'long' at a time, using masking tricks to see when and where we found
the terminating '\n'.
I stole inspiration and code from the posts by Linus Torvalds around
https://lkml.org/lkml/2012/3/2/452https://lkml.org/lkml/2012/3/5/6
His method reads the buffers in sizeof(long) increments, and may thus
overrun it by at most sizeof(long)-1 bytes before it sees the final
newline (or hits the buffer length check). I considered padding out
all buffers by a suitable amount to "catch" the overrun, but
* this does not work for mmap()'d buffers: if you map 4096+8 bytes
from a 4096 byte file, accessing the last 8 bytes results in a
SIGBUS on my machine; and
* it would also be extremely ugly because it intrudes deep into the
unpacking machinery.
So I adapted it to not read beyond the buffer at all. Instead, it
reads the final partial word byte-by-byte and strings it together.
Then it can use the same logic as before to finish the hashing.
So far we enable this only on x86_64, where it provides nice speedup
for diff-related work:
Test origin/next tr/xdiff-fast-hash
-----------------------------------------------------------------------------
4000.1: log -3000 (baseline) 0.07(0.05+0.02) 0.08(0.06+0.02) +14.3%
4000.2: log --raw -3000 (tree-only) 0.37(0.33+0.04) 0.37(0.32+0.04) +0.0%
4000.3: log -p -3000 (Myers) 1.75(1.65+0.09) 1.60(1.49+0.10) -8.6%
4000.4: log -p -3000 --histogram 1.73(1.62+0.09) 1.58(1.49+0.08) -8.7%
4000.5: log -p -3000 --patience 2.11(2.00+0.10) 1.94(1.80+0.11) -8.1%
Perhaps other platforms could also benefit. However it does NOT work
on big-endian systems!
[jc: minimum style and compilation fixes]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the testing of the 1.7.10 rc series on Solaris for OpenCSW, it
was discovered that t7006-pager was failing due to finding a bad "sh"
in PATH after a call to execvp("sh", ...). This call was setup by
run_command.c:prepare_shell_cmd.
The PATH in use at the time saw /opt/csw/bin given precedence to
traditional Solaris paths such as /usr/bin and /usr/xpg4/bin. A
package named schilyutils (Joerg Schilling's utilities) was installed
on the build system and it delivered a modified version of the
traditional Solaris /usr/bin/sh as /opt/csw/bin/sh. This version of
sh suffers from many of the same problems as /usr/bin/sh.
The command-specific pager test failed due to the broken "sh" handling
^ as a pipe character. It tried to fork two processes when it
encountered "sed s/^/foo:/" as the pager command. This problem was
entirely dependent on the PATH of the user at runtime.
Possible fixes for this issue are:
1. Use the standard system() or popen() which both launch a POSIX
shell on Solaris as long as _POSIX_SOURCE is defined.
2. The git wrapper could prepend SANE_TOOL_PATH to PATH thus forcing
all unqualified commands run to use the known good tools on the
system.
3. The run_command.c:prepare_shell_command() could use the same
SHELL_PATH that is in the #! line of all all scripts and not rely
on PATH to find the sh to run.
Option 1 would preclude opening a bidirectional pipe to a filter
script and would also break git for Windows as cmd.exe is spawned from
system() (cf. v1.7.5-rc0~144^2, "alias: use run_command api to execute
aliases, 2011-01-07).
Option 2 is not friendly to users as it would negate their ability to
use tools of their choice in many cases. Alternately, injecting
SANE_TOOL_PATH such that it takes precedence over /bin and /usr/bin
(and anything with lower precedence than those paths) as
git-sh-setup.sh does would not solve the problem either as the user
environment could still allow a bad sh to be found. (Many OpenCSW
users will have /opt/csw/bin leading their PATH and some subset would
have schilyutils installed.)
Option 3 allows us to use a known good shell while still honouring the
users' PATH for the utilities being run. Thus, it solves the problem
while not negatively impacting either users or git's ability to run
external commands in convenient ways. Essentially, the shell is a
special case of tool that should not rely on SANE_TOOL_PATH and must
be called explicitly.
With this patch applied, any code path leading to
run_command.c:prepare_shell_cmd can count on using the same sane shell
that all shell scripts in the git suite use. Both the build system
and run_command.c will default this shell to /bin/sh unless
overridden.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
Starting with commit v1.7.8-165-g0579f91, grep.h includes
thread-utils.h, so the latter has to be added to LIB_H.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file 'po/git.pot' is generated using the command 'make pot'
against git v1.7.9-209-gb6b3b (Update draft release notes to 1.7.10).
Since po/git.pot is tracked, remove the entry from .gitignore, and
not delete the file again when doing 'make distclean'.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Ever since the very first commit to git.git we've been setting CC to
"gcc". Presumably this is behavior that Linus copied from the Linux
Makefile.
However unlike Linux Git is written in ANSI C and supports a multitude
of compilers, including Clang, Sun Studio, xlc etc. On my Linux box
"cc" is a symlink to clang, and on a Solaris box I have access to "cc"
is Sun Studio's CC.
Both of these are perfectly capable of compiling Git, and it's
annoying to have to specify CC=cc on the command-line when compiling
Git when that's the default behavior of most other portable programs.
So change the default to "cc". Users who want to compile with GCC can
still add "CC=gcc" to the make(1) command-line, but those users who
don't have GCC as their "cc" will see expected behavior, and as a
bonus we'll be more likely to smoke out new compilation warnings from
our distributors since they'll me using a more varied set of compilers
by default.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems, the function locale_charset() may not be exported from
libiconv but is available from libcharset, and we need -lcharset when
linking.
Introduce a make variable CHARSET_LIB that can be set to -lcharsetlib
on such systems. Also autodetect this in the configure script by first
looking for the symbol in libiconv, and then libcharset.
Signed-off-by: Дилян Палаузов <dilyan.palauzov@aegee.org>
$X is appended to binary names for Windows builds (ie. git.exe).
Pollution from the environment can inadvertently trigger this behaviour,
resulting in 'git' turning into 'gitwhatever' without warning.
Signed-off-by: Michael Palimaka <kensington@astralcloak.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is necessary to write the else branch as a nested conditional. Also,
write the conditions with parentheses because we use them throughout the
Makefile.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/svn-fe: (36 commits)
vcs-svn: suppress a -Wtype-limits warning
vcs-svn: allow import of > 4GiB files
vcs-svn: rename check_overflow arguments for clarity
vcs-svn/svndiff.c: squelch false "unused" warning from gcc
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
...
There was a number of problems I ran into when trying the
profile-directed optimizations added by Andi Kleen in git commit
7ddc2710b9. (This was using gcc 4.4 found on many enterprise
distros.)
1) The -fprofile-generate and -fprofile-use commands are incompatible
with ccache; the code ends up looking in the wrong place for the gcda
files based on the ccache object names.
2) If the makefile notices that CFLAGS are different, it will rebuild
all of the binaries. Hence the recipe originally specified by the
INSTALL file ("make profile-all" followed by "make install") doesn't
work. It will appear to work, but the binaries will end up getting
built with no optimization.
This patch fixes this by using an explicit set of options passed via
the PROFILE variable then using this to directly manipulate CFLAGS and
EXTLIBS.
The developer can run "make PROFILE=BUILD all ; sudo make
PROFILE=BUILD install" automatically run a two-pass build with the
test suite run in between as the sample workload for the purpose of
recording profiling information to do the profile-directed
optimization.
Alternatively, the profiling version of binaries can be built using:
make PROFILE=GEN PROFILE_DIR=/var/cache/profile all
make PROFILE=GEN install
and then after git has been used for a while, the optimized version of
the binary can be built as follows:
make PROFILE=USE PROFILE_DIR=/var/cache/profile all
make PROFILE=USE install
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/i18n-no-gettext:
i18n: Do not force USE_GETTEXT_SCHEME=fallthrough on NO_GETTEXT
i18n: Make NO_GETTEXT imply fallthrough scheme in shell l10n
add a Makefile switch to avoid gettext translation in shell scripts
git-sh-i18n: restructure the logic to compute gettext.sh scheme
This simplifies svn-fe a great deal and fulfills a longstanding wish:
support for dumps with deltas in them, and incremental imports.
The cost is that commandline usage of the svn-fe tool becomes a little
more complicated since it no longer keeps state itself but instead reads
blobs back from fast-import in order to copy them between revisions and
apply deltas to them.
Also removes a couple of custom data structures and replaces them with
strbufs like other parts of Git.
* 'svn-fe' of git://repo.or.cz/git/jrn: (32 commits)
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
vcs-svn: avoid using ls command twice
...
Conflicts:
Makefile
contrib/svn-fe/svn-fe.txt
It should merely be the default used when the builder does not say
anything about USE_GETTEXT_SCHEME.
Even with NO_GETTEXT, USE_GETTEXT_SCHEME=gnu may be a way to avoid
possibly slower emulation in our shell scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems have gettext.sh (GNU gettext) installed, but it is either
broken or misconfigured in such a way so its output is not usable. In
case the users of these systems are unable or not interested in fixing
them, setting the new Makefile switch should help:
make USE_GETTEXT_SCHEME=fallthrough
This will replace the translation routines with fallthrough versions,
that does not use gettext from the platform.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/git-prompt:
contrib: add credential helper for OS X Keychain
Makefile: OS X has /dev/tty
Makefile: linux has /dev/tty
credential: use git_prompt instead of git_getpass
prompt: use git_terminal_prompt
add generic terminal prompt function
refactor git_getpass into generic prompt function
move git_getpass to its own source file
imap-send: don't check return value of git_getpass
imap-send: avoid buffer overflow
Conflicts:
Makefile
* tr/cache-tree:
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* jk/credentials:
t: add test harness for external credential helpers
credentials: add "store" helper
strbuf: add strbuf_add*_urlencode
Makefile: unix sockets may not available on some platforms
credentials: add "cache" helper
docs: end-user documentation for the credential subsystem
credential: make relevance of http path configurable
credential: add credential.*.username
credential: apply helper config
http: use credential API to get passwords
credential: add function for parsing url components
introduce credentials API
t5550: fix typo
test-lib: add test_config_global variant
Conflicts:
strbuf.c
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
Therefore we can turn on our custom prompt function instead
of relying on getpass.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we need to prompt the user for input interactively, we
want to access their terminal directly. We can't rely on
stdio because it may be connected to pipes or files, rather
than the terminal. Instead, we use "getpass()", because it
abstracts the idea of prompting and reading from the
terminal. However, it has some problems:
1. It never echoes the typed characters, which makes it OK
for passwords but annoying for other input (like usernames).
2. Some implementations of getpass() have an extremely
small input buffer (e.g., Solaris 8 is reported to
support only 8 characters).
3. Some implementations of getpass() will fall back to
reading from stdin (e.g., glibc). We explicitly don't
want this, because our stdin may be connected to a pipe
speaking a particular protocol, and reading will
disrupt the protocol flow (e.g., the remote-curl
helper).
4. Some implementations of getpass() turn off signals, so
that hitting "^C" on the terminal does not break out of
the password prompt. This can be a mild annoyance.
Instead, let's provide an abstract "git_terminal_prompt"
function that addresses these concerns. This patch includes
an implementation based on /dev/tty, enabled by setting
HAVE_DEV_TTY. The fallback is to use getpass() as before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is like "cache", except that we actually put the
credentials on disk. This can be terribly insecure, of
course, but we do what we can to protect them by filesystem
permissions, and we warn the user in the documentation.
This is not unlike using .netrc to store entries, but it's a
little more user-friendly. Instead of putting credentials in
place ahead of time, we transparently store them after
prompting the user for them once.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is currently in connect.c, but really has nothing to
do with the git protocol itself. Let's make a new source
file all about prompting the user, which will make it
cleaner to refactor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a configuration option NO_UNIX_SOCKETS to exclude code that
depends on Unix sockets and use it in MSVC and MinGW builds.
Notice that unix-socket.h was missing from LIB_H before; fix that, too.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you access repositories over smart-http using http
authentication, then it can be annoying to have git ask you
for your password repeatedly. We cache credentials in
memory, of course, but git is composed of many small
programs. Having to input your password for each one can be
frustrating.
This patch introduces a credential helper that will cache
passwords in memory for a short period of time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few places in git that need to get a username
and password credential from the user; the most notable one
is HTTP authentication for smart-http pushing.
Right now the only choices for providing credentials are to
put them plaintext into your ~/.netrc, or to have git prompt
you (either on the terminal or via an askpass program). The
former is not very secure, and the latter is not very
convenient.
Unfortunately, there is no "always best" solution for
password management. The details will depend on the tradeoff
you want between security and convenience, as well as how
git can integrate with other security systems (e.g., many
operating systems provide a keychain or password wallet for
single sign-on).
This patch provides an abstract notion of credentials as a
data item, and provides three basic operations:
- fill (i.e., acquire from external storage or from the
user)
- approve (mark a credential as "working" for further
storage)
- reject (mark a credential as "not working", so it can
be removed from storage)
These operations can be backed by external helper processes
that interact with system- or user-specific secure storage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
* jc/request-pull-show-head-4:
request-pull: use the annotated tag contents
fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error
environment.c: Fix an sparse "symbol not declared" warning
builtin/log.c: Fix an "Using plain integer as NULL pointer" warning
fmt-merge-msg: use branch.$name.description
request-pull: use the branch description
request-pull: state what commit to expect
request-pull: modernize style
branch: teach --edit-description option
format-patch: use branch description in cover letter
branch: add read_branch_desc() helper function
Conflicts:
builtin/branch.c
A simple utility that invalidates all existing cache-tree data. We
need this for tests. (We don't need a tool to rebuild the cache-tree
data; git read-tree HEAD works for that.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the COMPUTE_HEADER_DEPENDENCIES feature is turned on
automatically for compilers that support it (see v1.7.8-rc0~142^2~1,
2011-08-18), there is no easy way to force it off. For example,
setting COMPUTE_HEADER_DEPENDENCIES to the empty string in config.mak
just tells the makefile to treat it as undefined and run a test
command to see if the -MMD option is supported.
So allow setting COMPUTE_HEADER_DEPENDENCIES=no to explicitly force
the feature off. The new semantics:
- "yes" means to explicitly enable the feature
- "no" means to disable it
- "auto" means to autodetect
The default is still "auto". Any value other than these three will
cause the build to error out with a descriptive message so typos and
stale settings in config.mak don't result in mysterious behavior.
Makefile:1278: *** please set COMPUTE_HEADER_DEPENDENCIES to
yes, no, or auto (not "1"). Stop.
So now when someone using a compiler without -MMD support reports
trouble building git, you can reproduce it by running "make
COMPUTE_HEADER_DEPENDENCIES=no".
Suggested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the streaming filter API was introduced in v1.7.7-rc0~60^2~7
(2011-05-20), we forgot to add its header to LIB_H. Most translation
units depend on streaming.h via cache.h.
v1.7.5-rc0~48 (Fix sparse warnings, 2011-03-22) introduced undeclared
dependencies by url.o on url.h and thread-utils.o on thread-utils.h.
Noticed by make CHECK_HEADER_DEPENDENCIES=1.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mostly moves existing code from builtin/tag.c (for signing)
and builtin/verify-tag.c (for verifying) to a new gpg-interface.c
file to provide a more generic library interface.
- sign_buffer() takes a payload strbuf, a signature strbuf, and a signing
key, runs "gpg" to produce a detached signature for the payload, and
appends it to the signature strbuf. The contents of a signed tag that
concatenates the payload and the detached signature can be produced by
giving the same strbuf as payload and signature strbuf.
- verify_signed_buffer() takes a payload and a detached signature as
<ptr, len> pairs, and runs "gpg --verify" to see if the payload matches
the signature. It can optionally capture the output from GPG to allow
the callers to pretty-print it in a way more suitable for their
contexts.
"verify-tag" (aka "tag -v") used to save the whole tag contents as if it
is a detached signature, and fed gpg the payload part of the tag. It
relied on gpg to fail when the given tag is not signed but just is
annotated. The updated run_gpg_verify() function detects the lack of
detached signature in the input, and errors out without bothering "gpg".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since systems that omit strtoumax() will likely omit strtomax() too, and
likewise for strtoull() and strtoll(), we arrange for the make variables
NO_STRTOUMAX and NO_STRTOULL to cover both the signed and unsigned
functions, and define compatibility implementations for them.
Signed-off-by: Nick Alcock <nix@esperi.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we moved this header file in the code but forgot to
update the Makefile that refers to it.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both XSI and upstream Gnulib versions expects to find poll.h at
the root of some include path, not inside the sys-folder.
This helps us when upgrading Gnulib.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
The [ce]tags and cscope targets used to run "find" looking for any paths
that match '*.[chS]' to feed the list of source files to downstream xargs.
Use "git ls-files" if it is already available to us, and otherwise use a
tighter "find" expression that does not list directories and does not go
into our .git directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since mergetool--lib was split into multiple files in
v1.7.7-rc0~3^2~1 (2011-08-18), the Makefile takes care to reset umask
and use tar --no-owner when installing merge tool definitions to
$(gitexecdir)/mergetools/. Unfortunately it does not take into
account the possibility that the permission bits of the files being
copied might already be wrong.
Rather than fixing the "tar" incantation and making it even more
complicated, let's just use the "install" utility. This only means
losing the ability to install executables and subdirectories of
mergetools/, which wasn't used.
Noticed by installing from a copy of git checked out with umask 002.
Compare v1.6.0.3~81^2 (Fix permission bits on sources checked out with
an overtight umask, 2008-08-21).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "merge --log" and fmt-merge-msg to use branch description
information when merging a local topic branch into the mainline. The
description goes between the branch name label and the list of commit
titles.
The refactoring to share the common configuration parsing between
merge and fmt-merge-msg needs to be made into a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
* rr/revert-cherry-pick-continue:
builtin/revert.c: make commit_list_append() static
revert: Propagate errors upwards from do_pick_commit
revert: Introduce --continue to continue the operation
revert: Don't implicitly stomp pending sequencer operation
revert: Remove sequencer state when no commits are pending
reset: Make reset remove the sequencer state
revert: Introduce --reset to remove sequencer state
revert: Make pick_commits functionally act on a commit list
revert: Save command-line options for continuing operation
revert: Save data for continuing after conflict resolution
revert: Don't create invalid replay_opts in parse_args
revert: Separate cmdline parsing from functional code
revert: Introduce struct to keep command-line options
revert: Eliminate global "commit" variable
revert: Rename no_replay to record_origin
revert: Don't check lone argument in get_encoding
revert: Simplify and inline add_message_to_msg
config: Introduce functions to write non-standard file
advice: Introduce error_resolve_conflict
The g+s bit on directories to make group ownership inherited is a
SysVism --- BSD and most of its descendants do not need it since they
do the sane thing by default without g+s. In fact, on some
filesystems (but not all --- tmpfs works this way but UFS does not),
the kernel of FreeBSD does not even allow non-root users to set setgid
bit on directories and produces errors when one tries:
$ git init --shared dir
fatal: Could not make /tmp/dir/.git/refs writable by group
Since the setgid bit would only mean "do what you were going to do
already", it's better to avoid setting it. Accordingly, ever since
v1.5.5-rc0~59^2 (Do not use GUID on dir in git init --share=all on
FreeBSD, 2008-03-05), git on true FreeBSD has done exactly that. Set
DIR_HAS_BSD_GROUP_SEMANTICS in the makefile for GNU/kFreeBSD, too, so
machines that use glibc with the kernel of FreeBSD get the same fix.
This fixes t0001-init.sh and t1301-shared-repo.sh on GNU/kFreeBSD
when running tests with --root pointing to a directory that uses
tmpfs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule code recently grew generic code to build a
dynamic argv array. Many other parts of the code can reuse
this, too, so let's make it generically available.
There are two enhancements not found in the original code:
1. We now handle the NULL-termination invariant properly,
even when no strings have been pushed (before, you
could have an empty, NULL argv). This was not a problem
for the submodule code, which always pushed at least
one argument, but was not sufficiently safe for
generic code.
2. There is a formatted variant of the "push" function.
This is a convenience function which was not needed by
the submodule code, but will make it easier to port
other users to the new code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the helper function and the type definition of the iterator
function it uses out of builtin/fetch.c into a separate source and a
header file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fk/use-kwset-pickaxe-grep-f:
obstack: Fix portability issues
Use kwset in grep
Use kwset in pickaxe
Adapt the kwset code to Git
Add string search routines from GNU grep
Add obstack.[ch] from EGLIBC 2.10
The Makefile enables CHECK_HEADER_DEPENDENCIES when the
compiler supports generating header dependencies.
Make the check use the same flags as the invocation
to avoid a false positive when user-configured compiler
flags contain incompatible options.
For example, without this patch, trying to build universal
binaries on a Mac using CFLAGS='-arch i386 -arch x86_64'
produces:
gcc-4.2: -E, -S, -save-temps and -M options are
not allowed with multiple -arch flags
While at it, remove "sh -c" in the command passed to $(shell);
at this point in the Makefile, SHELL has already been set to
a sensible shell and it is better not to override that.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/difftool-mergtool-refactor:
mergetools/meld: Use '--output' when available
mergetool--lib: Refactor tools into separate files
mergetool--lib: Make style consistent with git
difftool--helper: Make style consistent with git
Individual merge tools are now defined in a mergetools/$tool
file which is sourced at runtime.
The individual files are installed into $(git --exec-path)/mergetools/.
New tools can be added by creating a new file instead of editing the
git-mergetool--lib.sh scriptlet.
http://thread.gmane.org/gmane.comp.version-control.git/134906/focus=135006
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously you had to manually define COMPUTE_HEADER_DEPENDENCIES to
enable this feature. It seemed a bit sad that such a useful feature
had to be enabled manually.
To avoid the small overhead we don't do the auto-detection if
COMPUTE_HEADER_DEPENDENCIES is already set.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/histogram-diff:
xdiff/xhistogram: drop need for additional variable
xdiff/xhistogram: rely on xdl_trim_ends()
xdiff/xhistogram: rework handling of recursed results
xdiff: do away with xdl_mmfile_next()
Make test number unique
xdiff/xprepare: use a smaller sample size for histogram diff
xdiff/xprepare: skip classification
teach --histogram to diff
t4033-diff-patience: factor out tests
xdiff/xpatience: factor out fall-back-diff function
xdiff/xprepare: refactor abort cleanups
xdiff/xprepare: use memset()
Currently parse-options.o pulls quite a big bunch of dependencies.
his complicates it's usage in contrib/ because it pulls external
dependencies and it also increases executables size.
Split off less generic and more internal to git part of
parse-options.c to parse-options-cb.c.
Move prefix_filename function from setup.c to abspath.c. abspath.o
and wrapper.o pull each other, so it's unlikely to increase the
dependencies. It was a dependency of parse-options.o that pulled
many others.
Now parse-options.o pulls just abspath.o, ctype.o, strbuf.o, usage.o,
wrapper.o, libc directly and strlcpy.o indirectly.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To explicitly remove the sequencer state for a fresh cherry-pick or
revert invocation, introduce a new subcommand called "--reset" to
remove the sequencer state.
Take the opportunity to publicly expose the sequencer paths, and a
generic function called "remove_sequencer_state" that various git
programs can use to remove the sequencer state in a uniform manner;
"git reset" uses it later in this series. Introducing this public API
is also in line with our long-term goal of eventually factoring out
functions from revert.c into a generic commit sequencer.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename git-http-pull to git-http-fetch. This was passed over in 215a7ad
(Big tool rename, Wed Sep 7 17:26:23 2005 -0700).
Also, distinguish between dumb and smart in flag docs, as the "warnings"
in NO_CURL and NO_EXPACT are no longer accurate given the introduction
of smart http(s).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a $(uname_S) case for Minix with the correct options.
Minix's linker needs all libraries specified explicitly.
Add NEEDS_SSL_WITH_CURL to add -lssl when using -lcurl.
Add NEEDS_IDN_WITH_CURL to add -lidn when using -lcurl.
When NEEDS_SSL_WITH_CURL is defined and NEEDS_CRYPTO_WITH_SSL
is defined, add -lcrypt to CURL_LIBCURL.
Change OPENSSL_LINK to OPENSSL_LIBSSL in the
NEEDS_CRYPTO_WITH_SSL conditional in the libopenssl
section. Libraries go in OPENSSL_LIBSSL, OPENSSL_LINK
is for linker flags.
Signed-off-by: Thomas Cort <tcort@minix3.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/gcc46-profile-feedback:
Add explanation of the profile feedback build to the README
Add profile feedback build to git
Add option to disable NORETURN
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show
that it is faster than its --patience cousin, as well as the default
Meyers algorithm.
The implementation has been reworked to use structs and pointers,
instead of bitmasks, thus doing away with JGit's 2^28 line limit.
We also use xdiff's default hash table implementation (xdl_hash_bits()
with XDL_HASHLONG()) for convenience.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/streaming:
sha1_file: use the correct type (ssize_t, not size_t) for read-style function
streaming: read loose objects incrementally
sha1_file.c: expose helpers to read loose objects
streaming: read non-delta incrementally from a pack
streaming_write_entry(): support files with holes
convert: CRLF_INPUT is a no-op in the output codepath
streaming_write_entry(): use streaming API in write_entry()
streaming: a new API to read from the object store
write_entry(): separate two helper functions out
unpack_object_header(): make it public
sha1_object_info_extended(): hint about objects in delta-base cache
sha1_object_info_extended(): expose a bit more info
packed_object_info_detail(): do not return a string
Some profiling tools (e.g., google-perftools and mutrace) work by
linking in a new library into the executables. When using these tools
it is convenient to only relink instead of doing a full make clean;
make cycle.
This change complements the auto-detection of changes to CFLAGS that
we already have. Tracking of more variables that affect the build can
be added when the need arise.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a gcc profile feedback build option "profile-all" to the main
Makefile. It simply runs the test suite to generate feedback data and the
recompiles the main executables with that. The basic structure is similar
to the existing gcov code.
gcc is often able to generate better code with profile feedback data. The
training load also doesn't need to be too similar to the actual load, it
still gives benefits.
The test suite run is unfortunately quite long. It would be good to find a
suitable subset that runs faster and still gives reasonable feedback.
For now the test suite runs single threaded (I had some trouble running
the test suite with -jX)
I tested it with git gc and git blame kernel/sched.c on a Linux kernel
tree. For gc I get about 2.7% improvement in wall clock time by using the
feedback build, for blame about 2.4%. That's not gigantic, but not shabby
either for a very small patch.
If anyone has any favourite CPU intensive git benchmarks feel free to try
them too.
I hope distributors will switch to use a feedback build in their packages.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a bug in gcc 4.6+ it can crash when doing profile feedback
with a noreturn function pointer
(http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49299)
This adds a Makefile variable to disable noreturns.
[Patch by Junio, description by Andi Kleen]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, on Interix, libsuacomp is required for building (see [1]).
Since suacomp provides poll() and inttypes.h for all interix versions,
remove NO_*=YesPlease that are no longer necessary.
Interix versions 3 and 5 miss struct sockaddr_storage, so make git
avoid using it.
Same for FNMATCH_CASEFOLD, which does not exist for Interix 3 and 5.
[1] http://news.gmane.org/find-root.php?message_id=%3c4DDF4440.4040405%40gentoo.org%3e
Signed-off-by: Markus Duft <mduft@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/delta-applier:
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
Conflicts:
Makefile
vcs-svn/LICENSE
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* jk/haves-from-alternate-odb:
receive-pack: eliminate duplicate .have refs
bisect: refactor sha1_array into a generic sha1 list
refactor refs_from_alternate_cb to allow passing extra data
* kk/maint-prefix-in-config-mak:
Honor $(prefix) set in config.mak* when defining ETC_GIT*
Revert "Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir"
Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir
* db/svn-fe-code-purge:
vcs-svn: drop obj_pool
vcs-svn: drop treap
vcs-svn: drop string_pool
vcs-svn: pass paths through to fast-import
Conflicts:
vcs-svn/fast_export.c
vcs-svn/fast_export.h
vcs-svn/repo_tree.c
vcs-svn/repo_tree.h
vcs-svn/string_pool.c
vcs-svn/svndump.c
vcs-svn/trp.txt
Given an object name, use open_istream() to get a git_istream handle
that you can read_istream() from as if you are using read(2) to read
the contents of the object, and close it with close_istream() when
you are done.
Currently, we do not do anything fancy--it just calls read_sha1_file()
and keeps the contents in memory as a whole, and carve it out as you
request with read_istream().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a generally useful abstraction, so let's let others
make use of it. The refactoring is more or less a straight
copy; however, functions and struct members have had their
names changed to match string_list, which is the most
similar data structure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We usually keep these lists in sorted order, but the last
few entries were just tacked on the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow NO_GECOS_IN_PWENT to be defined in the Makefile for platforms that
lack the pw_gecos field in their "struct passwd", in which case the
uppercased user name is used instead via the standard '&' replacement
mechanism.
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kk/maint-prefix-in-config-mak:
Honor $(prefix) set in config.mak* when defining ETC_GIT*
Revert "Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir"
Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir
Otherwise we would fail to rebuild correctly when this option was
changed between $(MAKE) invocations, and more importantly, $(MAKE) test
would not pass it down and t/test-lib.sh would not set the LIBPCRE
prerequisite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "pot" target to also extract strings from our $(SCRIPT_SH)
files with xgettext(1).
Note that due to Jonathan Nieder's trick of doing "mv $@+ $@" at the
end of the target the "pot" target will now warn:
$ make pot
XGETTEXT po/git.pot
po/git.pot+: warning: Charset "CHARSET" is not a portable encoding name.
Message conversion to user's charset might not work.
This warnings is emitted because xgettext is writing into a non-*.pot
file, it's harmless however. The content that's written out is
equivalent to what it would be if we were writing directly into an
existing POT file with --join-existing.
As part of this change I've eliminated the && chain between xgettext
calls, this is incompatible with $(QUIET_XGETTEXT), if the && is left
in it'll emit:
/bin/sh: @echo: not found
Since it's redundant (the Makefile will stop if there's an error) I've
removed it altogether.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a no-op wrapper library for Git's shell scripts. To split up the
gettext series I'm first submitting patches to gettextize the source
tree before I add any of the Makefile and Shell library changes needed
to actually use them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git-sh-i18n--envsubst program which is a stripped-down version
of the GNU envsubst(1) program that comes with GNU gettext for use in
the eval_gettext() fallback.
We need a C helper program because implementing eval_gettext() purely
in shell turned out to be unworkable. Digging through the Git mailing
list archives will reveal two shell implementations of eval_gettext
that are almost good enough, but fail on an edge case which is tested
for in the tests which are part of this patch.
These are the modifications I made to envsubst.c as I turned it into
sh-i18n--envsubst.c:
* Added our git-compat-util.h header for xrealloc() and friends.
* Removed inclusion of gettext-specific headers.
* Removed most of main() and replaced it with my own. The modified
version only does option parsing for --variables. That's all it
needs.
* Modified error() invocations to use our error() instead of
error(3).
* Replaced the gettext XNMALLOC(n, size) macro with just
xmalloc(n). Since XNMALLOC() only allocated char's.
* Removed the string_list_destroy function. It's redundant (also in
the upstream code).
* Replaced the use of stdbool.h (a C99 header) by doing the following
replacements on the code:
* s/bool/unsigned short int/g
* s/true/1/g
* s/false/0/g
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notice that the prefix specified for the build influenced the definitions
of ETC_GITCONFIG and ETC_GITATTRIBUTES only when it was exactly '/usr'.
Kacper Kornet noticed that this was furthermore only the case when the
build was triggered using 'make prefix=/usr', i.e., the prefix was given
on the command line; it did not work when the prefix was specified in
config.mak because this file is included much later in the Makefile.
To fix this, move the conditional after the inclusion of config.mak.
Additionally, it is desirable to specify the etc directory for a build
(for example, a build with prefix /usr/local may still want to have the
system configuration in /etc/gitconfig). For this purpose, promote the
variable 'sysconfdir' from a helper variable to a configuration
variable. The prefix check that was moved must now be wrapped so that it
does not override sysconfdir setting given in config.mak.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is gitweb/Makefile, let's leave only "gitweb" and
"install-gitweb" targets in main Makefile. Those targets just
delegate to gitweb's Makefile.
Requested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c0cb4ed (git-instaweb: Configure it to work with new gitweb
structure, 2010-05-28) git-instaweb does not re-create gitweb.cgi
etc., but makes use of installed gitweb. Therefore simplify
git-instaweb dependency on gitweb subsystem in main Makefile from
'gitweb/gitweb.cgi gitweb/static/gitweb.css gitweb/static/gitweb.js'
to simply 'gitweb'.
This is preparation for splitting gitweb.perl script, and for
splitting gitweb.js (to be reassembled / combined on build). This way
we don't have to duplicate parts of gitweb/Makefile in main
Makefile... it is also more correct description of git-instaweb
dependency.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/info-man-path:
Documentation: clarify meaning of --html-path, --man-path, and --info-path
git: add --info-path and --man-path options
Conflicts:
Makefile
Similar to the way the --html-path option lets UI programs learn where git
has its HTML documentation pages, expose the other two paths used to store
the documentation pages of these two types.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
Definitions of ETC_GITCONFIG, ETC_GITATTRIBUTES and sysconfdir depend on
value of prefix. As prefix can be changed in config.mak.autogen, all if
blocks with conditions based on prefix should be placed after the file
is included in Makefile.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, sparse issues the following errors:
attr.c:472:43: error: undefined identifier 'ETC_GITATTRIBUTES'
config.c:821:43: error: undefined identifier 'ETC_GITCONFIG'
exec_cmd.c:14:37: error: undefined identifier 'PREFIX'
exec_cmd.c:83:28: error: undefined identifier 'GIT_EXEC_PATH'
builtin/help.c:328:46: error: undefined identifier 'GIT_MAN_PATH'
builtin/help.c:374:40: error: undefined identifier 'GIT_INFO_PATH'
builtin/help.c:382:45: error: undefined identifier 'GIT_HTML_PATH'
git.c:96:42: error: undefined identifier 'GIT_HTML_PATH'
git.c:241:35: error: invalid initializer
http.c:293:43: error: undefined identifier 'GIT_HTTP_USER_AGENT'
which is caused by not passing the target-specific additions to
the EXTRA_CPPFLAGS variable to cgcc.
In order to fix the problem, we define a new sparse target which
depends on a set of non-existent "sparse object" files (*.sp)
which correspond to the set of C source files. In addition to the
new target, we also provide a new pattern rule for "creating" the
sparse object files from the source files by running cgcc. This
allows us to add '*.sp' to the rules setting the target-specific
EXTRA_CPPFLAGS variable, which is then included in the new pattern
rule to run cgcc.
Also, we change the 'check' target to re-direct the user to the
new sparse target.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add a new "merge-file.h" header
containing the extern declaration of the merge_file() function,
and include the header in the source files that require the
declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cgcc is the recommended way to run sparse, since it provides
many -Defines suitable for the given gcc platform. Using an
"cgcc -no-compile" command runs sparse, with all the platform
specific definitions provided by cgcc, without also invoking
gcc.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Q_() wrapper added by 0c9ea33 (i18n: add stub Q_() wrapper for
ngettext, 2011-03-09) needs to be noticed by xgettext.
Add an appropriate --keyword option to the Makefile, so that "make pot"
would notice the strings in the plural form marked with the wrapper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A delta in the subversion delta (svndiff0) format consists of the
magic bytes SVN\0 followed by a sequence of windows of a certain well
specified format (starting with five integers).
Add an svndiff0_apply function and test-svn-fe -d commandline tool to
parse such a delta in the special case of not including any windows.
Later patches will add features to turn this into a fully functional
delta applier for svn-fe to use to parse the streams produced by
"svnrdump dump" and "svnadmin dump --deltas".
The content of symlinks starts with the word "link " in Subversion's
worldview, so we need to be able to prepend that text to input for the
sake of delta application. So initialization of the input state of
the delta preimage is left to the calling program, giving callers a
chance to seed the buffer with text of their choice.
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Improved-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Each section of a Subversion-format delta only requires examining (and
keeping in random-access memory) a small portion of the preimage. At
any moment, this portion starts at a certain file offset and has a
well-defined length, and as the delta is applied, the portion advances
from the beginning to the end of the preimage. Add a move_window
function to keep track of this view into the preimage.
You can use it like this:
buffer_init(f, NULL);
struct sliding_view window = SLIDING_VIEW_INIT(f);
move_window(&window, 3, 7); /* (1) */
move_window(&window, 5, 5); /* (2) */
move_window(&window, 12, 2); /* (3) */
strbuf_release(&window.buf);
buffer_deinit(f);
The data structure is called sliding_view instead of _window to
prevent confusion with svndiff0 Windows.
In this example, (1) reads 10 bytes and discards the first 3;
(2) discards the first 2, which are not needed any more; and (3) skips
2 bytes and reads 2 new bytes to work with.
When move_window returns, the file position indicator is at position
window->off + window->width and the data from positions window->off to
the current file position are stored in window->buf.
This function performs only sequential access from the input file and
never seeks, so it can be safely used on pipes and sockets.
On end-of-file, move_window silently reads less than the caller
requested. On other errors, it prints a message and returns -1.
Helped-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
As the svn import infrastructure evolves, it's getting to be a pain to
tell by eye what files were added or removed from a dependency line
like
VCSSVN_OBJS = vcs-svn/string_pool.o vcs-svn/line_buffer.o \
vcs-svn/repo_tree.o vcs-svn/fast_export.o vcs-svn/svndump.o
So use a style with one entry per line instead, like the existing
BUILTIN_OBJS:
# protect against environment
VCSSVN_OBJS =
...
VCSSVN_OBJS += vcs-svn/string_pool.o
VCSSVN_OBJS += vcs-svn/line_buffer.o
...
which is readable on its own and produces nice, clear diffs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This reverts commit 951f316470
(Add treap implementation, 2010-08-09). The string_pool was
trp.h's last user.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This reverts commit 1d73b52f5b
(Add string-specific memory pool, 2010-08-09). Now that svn-fe
does not need to maintain a growing collection of strings (paths)
over a long period of time, the string_pool is not needed.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
After the builtin/ move 'make check' doesn't cover the builtin/
directory. We could just add builtin/*.c but lets just use GIT_OBJS
instead so we cover future movement of the source files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-basic:
i18n: "make distclean" should clean up after "make pot"
i18n: Makefile: "pot" target to extract messages marked for translation
i18n: add stub Q_() wrapper for ngettext
i18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set
i18n: add GETTEXT_POISON to simulate unfriendly translator
i18n: add no-op _() and N_() wrappers
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
In the spirit of v1.5.0.2~21 (Check for PRIuMAX rather than
NO_C99_FORMAT in fast-import.c, 2007-02-20), use PRIuMAX from
git-compat-util.h on all platforms instead of C99-specific formats
like %zu with dangerous fallbacks to %u or %lu.
So now C99-challenged platforms can build git without provoking
warnings or errors from printf, even if pointers do not have the same
size as an int or long.
The need for a fallback PRIuMAX is detected in git-compat-util.h with
"#ifndef PRIuMAX". So while at it, simplify the Makefile and configure
script by eliminating the NO_C99_FORMAT knob altogether.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in "make distclean" and not "make clean" to avoid needlessly
changing the POT-Creation-Date in the following scenario:
make clean; # cleaning up after an old build
git pull
make pot; # regenerate po template if necessary
msgmerge po/my_language.po po/git.pot
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add rules to generate a template (po/git.pot) listing messages marked
for translation in the C portion of git.
To get started translating, just run "make pot".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the GETTEXT_POISON facility so it is activated at run time
instead of compile time. If the GIT_GETTEXT_POISON environment
variable is set, _(msg) will result in gibberish as before; but if the
GIT_GETTEXT_POISON variable is not set, it will return the message for
human-readable output. So the behavior of mistranslated and
untranslated git can be compared without rebuilding git in between.
For simplicity we always set the GIT_GETTEXT_POISON variable in tests.
This does not affect builds without the GETTEXT_POISON compile-time
option set, so non-i18n git will not be slowed down.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new GETTEXT_POISON compile-time parameter to make _(msg) always
return gibberish. So now you can run
make GETTEXT_POISON=YesPlease
to get a copy of git that functions correctly (one hopes) but produces
output that is in nobody's native language at all.
This is a debugging aid for people who are working on the i18n part of
the system, to make sure that they are not marking plumbing messages
that should never be translated with _().
As new strings get marked for translation, naturally a number of tests
will be broken in this mode. Tests that depend on output from
Porcelain will need to be marked with the new C_LOCALE_OUTPUT test
prerequisite. Newly failing tests that do not depend on output from
Porcelain would be bugs due to messages that should not have been
marked for translation.
Note that the string we're using ("# GETTEXT POISON #") intentionally
starts the pound sign. Some of Git's tests such as
t3404-rebase-interactive.sh rely on interactive editing with a fake
editor, and will needlessly break if the message doesn't start with
something the interactive editor considers a comment.
A future patch will fix fix the underlying cause of that issue by
adding "#" characters to the commit advice automatically.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The _ function is for translating strings into the user's chosen
language. The N_ macro just marks translatable strings for the
xgettext(1) tool without translating them; it is intended for use in
contexts where a function call cannot be used. So, for example:
fprintf(stderr, _("Expansion of alias '%s' failed; "
"'%s' is not a git command\n"),
cmd, argv[0]);
and
const char *unpack_plumbing_errors[NB_UNPACK_TREES_ERROR_TYPES] = {
/* ERROR_WOULD_OVERWRITE */
N_("Entry '%s' would be overwritten by merge. Cannot merge."),
[...]
Define such _ and N_ in a new gettext.h and include it in cache.h, so
they can be used everywhere. Each just returns its argument for now.
_ is a function rather than a macro like N_ to avoid the temptation to
use _("foo") as a string literal (which would be a compile-time error
once _(s) expands to an expression for the translation of s).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fnmatch() on HP-UX does not support the GNU FNM_CASEFOLD extension,
so set NO_FNMATCH_CASEFOLD to use the internal fnmatch implementation.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase.sh recently started sourcing
git-rebase--interactive.sh instead of executing it, executable bit of
the latter file should have been turned off and it should have been
moved from SCRIPT_SH to SCRIPT_LIB in the Makefile. Its two new
siblings, git-rebase--am.sh and git-rebase--merge.sh (whose executable
bits are already off) should also be moved to SCRIPT_LIB in the
Makefile.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for am-based rebase to git-rebase--am.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for merge-based rebase to git-rebase--merge.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
When setup_work_tree() is called, it moves cwd to $GIT_WORK_TREE and
makes internal copy of $GIT_WORK_TREE absolute. The environt variable,
if set by user, remains unchanged. If the variable is relative, it is
no longer correct because its base dir has changed.
Instead of making $GIT_WORK_TREE absolute too, we just say "." and let
subsequent git processes handle it.
Reported-by: Michel Briand <michelbriand@free.fr>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
IRIX's fnmatch() does not support the GNU FNM_CASEFOLD extension, so set
NO_FNMATCH_CASEFOLD so that the internal fnmatch implementation will be
used.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when creating a temporary file failed, a generic 'Unable to create
temporary file' message was printed. In some cases this could lead to
confusion as to which directory should be checked for correct permissions etc.
This patch adds the template for the temporary filename to the error message,
converting it to an absolute path if needed. A test verifies that the template
is indeed printed when pointing to a nonexistent or unwritable directory.
A copy of the original template is made in case mkstemp clears the template.
Signed-off-by: Arnout Engelen <arnouten@bzzt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.7.3.4
use persistent memory for rejected paths
do not overwrite files in leading path
lstat_cache: optionally return match_len
add function check_ok_to_remove()
t7607: add leading-path tests
t7607: use test-lib functions and check MERGE_HEAD
Do not link with -lcrypto under NO_OPENSSL
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
transport-helper.o gained a dependency on thread-utils.h in
7851b1e (remote-fd/ext: finishing touches after code review,
2010-11-17).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The msvc linker complains about external symbols referenced by
the new poll() emulation code. In particular, it complains about
the DispatchMessage(), PeekMessage(), TranslateMessage() and
MsgWaitForMultipleObjects() functions.
In order to satisfy the external references, we link against the
user32.lib library.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 401857c (imap-send: link against libcrypto for HMAC and others,
2010-11-24) we started linking imap-send unconditionally with -lcrypto by
mistake; disable this when we are building under NO_OPENSSL.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
The vcs-svn tests (test-treap.o et al) depend on the vcs-svn
headers for declarations and inline functions. Declare the
dependency. While at it, declare a dependency of the vcs-svn
objects (vcs-svn/string_pool.o et al) on $(LIB_H) to reflect use
within the vcs-svn library of git-compat-util.h and cache.h.
Without this change, tweaks to inline functions in those headers
do not provoke rebuilds of the corresponding tests[*], making
such changes unnecessarily difficult to test.
Before:
$ touch vcs-svn/*.h && make test-treap
$
After:
$ touch vcs-svn/*.h && make test-treap
CC test-treap.o
LINK test-treap
$
[*] unless COMPUTE_HEADER_DEPENDENCIES is enabled
Detected with "make CHECK_HEADER_DEPENDENCIES=1".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If someone runs "git st", the command "git status" is not suggested
because it's not one of the closest levenshtein-neighbour.
Reserve the distance of 0 for common commands where the entered command
is a prefixe, as these are often more likely to be what the user meant.
This way, "git status" is the first suggestion, while a list of possible
typos are still suggested as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
* jj/icase-directory:
Support case folding in git fast-import when core.ignorecase=true
Support case folding for git add when core.ignorecase=true
Add case insensitivity support when using git ls-files
Add case insensitivity support for directories when using git status
Case insensitivity support for .gitignore via core.ignorecase
Add string comparison functions that respect the ignore_case variable.
Makefile & configure: add a NO_FNMATCH_CASEFOLD flag
Makefile & configure: add a NO_FNMATCH flag
Conflicts:
Makefile
config.mak.in
configure.ac
fast-import.c
This allows non-http/curl users to access it too (eg. http-backend.c).
Update include headers in end_url_with_slash() users too.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the ASCIIDOC8 and ASCIIDOC_NO_ROFF knobs were built,
many people were still on asciidoc 7 and using older
versions of docbook-xsl. These days, even the almost
2-year-old Debian stable needs these knobs turned.
So let's turn them by default. The new knobs ASCIIDOC7 and
ASCIIDOC_ROFF can be used to get the old behavior if people
are on older systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
imap-send: link against libcrypto for HMAC and others
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
mingw: do not set errno to 0 on success
When using stricter linkers, such as GNU gold or Darwin ld, transitive
dependencies are not counted towards symbol resolution. If we don't link
imap-send to libcrypto, we'll have undefined references to the HMAC_*,
EVP_* and ERR_* functions families.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mingw-runtime implemenation of opendir, readdir and closedir
sets errno to 0 on success, something that POSIX explicitly
forbids. 3ba7a06 ("A loose object is not corrupt if it cannot be
read due to EMFILE") introduce a dependency on this behaviour,
leading to a broken "git clone" on Windows.
compat/mingw.c contains an implementation of readdir, and
compat/msvc.c contains implementations of opendir and closedir.
Move these to compat/win32/dirent.[ch], and change to our own DIR
structure at the same time.
This provides a generic Win32-implementation of opendir, readdir
and closedir which works on both MinGW and MSVC and does not reset
errno, and as a result git clone is working again on Windows.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This initial implementation of 'git notes merge' only handles the trivial
merge cases (i.e. where the merge is either a no-op, or a fast-forward).
The patch includes testcases for these trivial merge cases.
Future patches will extend the functionality of 'git notes merge'.
This patch has been improved by the following contributions:
- Stephen Boyd: Simplify argc logic
- Stephen Boyd: Use test_commit
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
- Jonathan Nieder: Add constants for common verbosity values
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Jonathan Nieder: Remove extraneous show() function
- Jonathan Nieder: Clarify handling of empty/missing notes ref in notes_merge()
- Junio C Hamano: fixup minor style issues
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Programs using xmalloc() but not git_inflate() require -lz on the
linker command line because git_inflate() is in the same translation
unit as xmalloc().
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not supply the POSIX-functions fork(), setuuid(), setgid(),
setsid() and initgroups(). Error out if --user or --detach is specified
when if so.
MinGW doesn't have prototypes and headers for inet_ntop and inet_pton,
so include our implementation instead. MSVC does, so avoid doing so
there.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows doesn't have inet_pton and inet_ntop, so
add prototypes in git-compat-util.h for them.
At the same time include git-compat-util.h in
the sources for these functions, so they use the
network-wrappers from there on Windows.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Syslog does not usually exist on Windows, so implement our own using
Window's ReportEvent mechanism.
Strings containing "%1" gets expanded into them selves by ReportEvent,
resulting in an unreadable string. "%2" and above is not a problem.
Unfortunately, on Windows an IPv6 address can contain "%1", so expand
"%1" to "% 1" before reporting. "%%1" is also a problem for ReportEvent,
but that string cannot occur in an IPv6 address.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* add required build options to Makefile.
* introduce new NO_INTTYPES_H for systems lacking inttypes; code
includes stdint.h instead, if this is set.
* introduce new NO_SYS_POLL_H for systems lacking sys/poll.h; code
includes poll.h instead, if this is set.
* introduce NO_INITGROUPS. initgroups() call is simply omitted.
Signed-off-by: Markus Duft <mduft@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper invokes external command and passes raw smart transport
stream through it. This is useful for instance for invoking ssh with
one-off odd options, connecting to git services in unix domain
sockets, in abstract namespace, using TLS or other secure protocols,
etc...
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper reflects raw smart remote transport stream back to the
calling program. This is useful for example if some UI wants to handle
ssh itself and not use hacks via GIT_SSH.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some platforms (like Solaris) there is a fnmatch, but it doesn't
support the GNU FNM_CASEFOLD extension that's used by the
jj/icase-directory series' fnmatch_icase wrapper.
Change the Makefile so that it's now possible to set
NO_FNMATCH_CASEFOLD=YesPlease on those systems, and add a configure
probe for it.
Unlike the NO_REGEX check we don't add AC_INCLUDES_DEFAULT to our
headers. This is because on a GNU system the definition of
FNM_CASEFOLD in fnmatch.h is guarded by:
#if !defined _POSIX_C_SOURCE || _POSIX_C_SOURCE < 2 || defined _GNU_SOURCE
One of the headers AC_INCLUDES_DEFAULT includes ends up defining one
of those, so if we'd use it we'd always get
NO_FNMATCH_CASEFOLD=YesPlease on GNU systems, even though they have
FNM_CASEFOLD.
When checking the flags we use:
ifdef NO_FNMATCH
...
else
ifdef NO_FNMATCH_CASEFOLD
...
endif
endif
The "else" so that we don't link against compat/fnmatch/fnmatch.o
twice if both NO_FNMATCH and NO_FNMATCH_CASEFOLD are defined.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows and MinGW both lack fnmatch() in their C library and needed
compat/fnmatch, but they had duplicate code for adding the compat
function, and there was no Makefile flag or configure check for
fnmatch.
Change the Makefile it so that it's now possible to compile the compat
function with a NO_FNMATCH=YesPlease flag, and add a configure probe
for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On case insensitive filesystems, "tags" and "TAGS" target will try to
overwrite the same file. Allow MinGW to use "ETAGS" instead.
These two targets do produce real files; do not put them on .PHONY target
list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the git make process so that everything's rebuilt if the CC is
changed. Before we wouldn't rebuilt if e.g. the CC variable was
changed from gcc to clang.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
