Verification of signed tags were not done correctly when not in C
or en/US locale.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
'git commit -m "$msg"' used to add an extra newline even when
$msg already ended with one.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
The "--match=<pattern>" option of "git describe", when used with
"--all" to allow refs that are not annotated tags to be used as a
base of description, did not restrict the output from the command to
those that match the given pattern.
* jc/describe:
describe: --match=<pattern> must limit the refs even when used with --all
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in the
middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
"git tag -f <tag>" always said "Updated tag '<tag>'" even when
creating a new tag (i.e. not overwriting nor updating).
* ph/tag-force-no-warn-on-creation:
tag: --force does not have to warn when creating tags
"git cmd -- ':(top'" was not diagnosed as an invalid syntax, and
instead the parser kept reading beyond the end of the string.
* lf/setup-prefix-pathspec:
setup.c: check that the pathspec magic ends with ")"
setup.c: stop prefix_pathspec() from looping past the end of string
* maint-1.8.1:
Start preparing for 1.8.1.6
git-tag(1): we tag HEAD by default
Fix revision walk for commits with the same dates
t2003: work around path mangling issue on Windows
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
entry: fix filter lookup
t2003: modernize style
name-hash.c: fix endless loop with core.ignorecase=true
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
The <commit>|<object> argument is actually not explained anywhere
(except implicitly in the description of an unannotated tag). Write a
little explanation, in particular to cover the default.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the ability to display an individual guide was always
possible. Include this in the update.
Also tell readers how git(1) can be accessed, especially for Git for
Windows users who do not have the 'man' command. Likewise include a
commentary on how to access this page (Catch 22).
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the overall help given at the end of "git help -a/-g" to
mention how to get help on individual commands and concepts.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements what "help -g" introduced in the previous step does.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic, but no actions, included.
The --all commands option, if given, will display the list of
available commands.
The --guide option's list of guides will then be displayed.
The common commands list is only displayed if neither option, nor a
command or guide name, is given.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"help -a" (help all) gives the list of available commands and then
further gives hints on the use of "git help". Separate these into
two steps, because we will add "help -g" (help guides) that want to
also show the overall hints after it is done.
While at it, change the definition of the "-a" option to use OPT_BOOL,
not the deprecated OPT_BOOLEAN. We do not behave differently when
the user gives the "-a" option multiple times, e.g. "git help -a -a".
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user requests to --set-upstream-to a branch that does
not exist, then either:
1. It was a typo.
2. They thought the branch should exist.
In case (1), there is not much we can do beyond showing the
name we tried to use. For case (2), though, we can help to
guide them through common workflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we refuse a branch operation because the tracking
start_name the user gave us is bogus, we just print
something like:
fatal: Cannot setup tracking information; start point is not a branch
If we mention the actual name we tried to use, that may help
the user figure out why it didn't work (e.g., if they gave
us the arguments in the wrong order).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are trying to set the upstream config for a branch,
the create_branch function will check both that the name
resolves as a ref, and that it is either a local or
remote-tracking branch.
However, before we do so we run get_sha1 on it to find out
whether it resolves at all (since the create_branch function
is also used to create actual branches, it wants to know
where to start the new branch). This means that if you feed
a ref that does not exist to "branch --set-upstream-to",
rather than getting a helpful message about tracking, you
only get "not a valid object name".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is duplicated, and is quite long. Let's factor
it out, which avoids the repetition and the long lines. It
will also make future patches easier as we tweak the
message.
While we're at it, let's also mark it for translation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests pass with the current code, but let's make sure
we don't accidentally break the behavior in the future.
Note that our tests expect failure when we try to set the
upstream to or from a missing branch. Technically we are
just munging config here, so we do not need the refs to
exist. But seeing that they do exist is a good check that
the user has not made a typo.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that "git config --unset" does not remove an empty section
head after removing the last variable in a section, and adding a
new variable does not try to reuse a leftover empty section head.
* jk/config-with-empty-section:
t1300: document some aesthetic failures of the config editor
Teach "show/log" honor gpg.program configuration just like other
parts of the code that use GnuPG.
* js/log-gpg:
log: read gpg settings for signed commit verification
Cygwin port has a faster-but-lying lstat(2) emulation whose
incorrectness does not matter in practice except for a few
codepaths, and setting permission bits to directories is a codepath
that needs to use a more correct one.
* tb/cygwin-shared-repository:
Make core.sharedRepository work under cygwin 1.7
This started as a topic to reduce "type var = var" self assignment
tricks that were used to squelch "variable used uninitialized perhaps?"
warning from some compilers, but resulted in rewriting logic with
a version that is simpler and easier to understand for humans.
* jk/no-more-self-assignment:
match-trees: simplify score_trees() using tree_entry()
submodule: clarify logic in show_submodule_summary
This is the logical equivalent for "git status" of 3ee4452 (bash: teach
__git_ps1 about REVERT_HEAD).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing filter-branch does is to create a temporary
directory, either ".git-rewrite" in the current directory
(which may be the working tree or the repository if bare),
or in a directory specified by "-d". We then chdir to
$tempdir/t as our temporary working directory in which to run
tree filters.
After finishing the filter, we then attempt to go back to
the original directory with "cd ../..". This works in the
.git-rewrite case, but if "-d" is used, we end up in a
random directory. The only thing we do after this chdir is
to run git-read-tree, but that means that:
1. The working directory is not updated to reflect the
filtered history.
2. We dump random files into "$tempdir/.." (e.g., if you
use "-d /tmp/foo", we dump junk into /tmp).
Fix it by recording the full path to the original directory
and returning there explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'git rerere forget .' after a merge that involved binary files
runs into an infinite loop if the binary file contains a zero byte.
Replace a strchrnul by memchr because the former does not make progress
as soon as the NUL is encountered.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable overrides `remote.pushdefault` and
`branch.<name>.remote` for pushes. When you pull from one
place (e.g. your upstream) and push to another place (e.g. your own
publishing repository), you would want to set `remote.pushdefault` to
specify the remote to push to for all branches, and use this option to
override it for a specific branch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable defines the default remote to push to,
and overrides `branch.<name>.remote` for all branches. It is useful
in the typical triangular-workflow setup, where the remote you're
fetching from is different from the remote you're pushing to.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, do_push() in push.c calls remote_get(), which gets the
configured remote for fetching and pushing. Replace this call with a
call to pushremote_get() instead, a new function that will return the
remote configured specifically for pushing. This function tries to
work with the string pushremote_name, before falling back to the
codepath of remote_get(). This patch has no visible impact, but
serves to enable future patches to introduce configuration variables
to set pushremote_name. For example, you can now do the following in
handle_config():
if (!strcmp(key, "remote.pushdefault"))
git_config_string(&pushremote_name, key, value);
Then, pushes will automatically go to the remote specified by
remote.pushdefault.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the tests in t5516 look like:
mk_empty &&
git push testrepo ... &&
check_push_result $commit heads/master
It's reasonably easy to see what is being tested, with the
exception that "testrepo" is a magic global name (it is
implicitly used in the helpers, but we have to name it
explicitly when calling git directly). Let's make it
explicit when call the helpers, too. This is slightly more
typing, but makes the test snippets read more naturally.
It also makes it easy for future tests to use an alternate
or multiple repositories, without a proliferation of helper
functions.
[rr: fixed sloppy quoting]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file was originally created in bcdb34f (Test wildcard push/fetch,
2007-06-08), and only contained tests that exercised wildcard
functionality at the time. In subsequent commits, many other tests
unrelated to wildcards were added but the test description was never
updated. Fix this.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small segment where handle_config() parses the branch.remote
configuration variable can be simplified using git_config_string().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version could be read to mean that the argument has to refer
to a valid object, but that is incorrect:
* the object is not necessarily read (e.g., to check for corruption)
* if the argument is a 40-digit string of hex digits, then it is
accepted whether or not is is the name of an existing object.
So reword the explanation to be less ambiguous.
Also fix the examples involving --verify: to be sure that the argument
refers to a commit (rather than some other kind of object), the
argument has to be suffixed with "^{commit}". This trick is not
possible in the example involving --default, so don't imply that it is
exactly the same as the previous example.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
