All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't reset the strbufs l2 and l3 before use as if they were static, but
release them at the end instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function close_pack_fd() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save the rerere-autoupdate setting so that it is remembered after
stopping for the user to resolve conflicts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
A few codepaths in "checkout" and "am" working on an unborn branch
tried to access an uninitialized piece of memory.
* rs/checkout-am-fix-unborn:
am: check return value of resolve_refdup before using hash
checkout: check return value of resolve_refdup before using hash
The codepath in "git am" that is used when running "git rebase"
leaked memory held for the log message of the commits being rebased.
* jk/am-leakfix:
am: shorten ident_split variable name in get_commit_info()
am: simplify allocations in get_commit_info()
am: fix commit buffer leak in get_commit_info()
Git sometimes gives an advice in a rhetorical question that does
not require an answer, which can confuse new users and non native
speakers. Attempt to rephrase them.
* ja/do-not-ask-needless-questions:
git-filter-branch: be more direct in an error message
read-tree -m: make error message for merging 0 trees less smart aleck
usability: don't ask questions if no reply is required
Convert most of the static functions to use struct object_id. In
addition, convert copy_notes_for_rewrite and its callers.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user provides "-h" on the command line, then our
parse_options() invocation will show a usage message and
quit. But if "-h" is the only argument, the git wrapper
behaves specially: it ignores our RUN_SETUP flag and calls
cmd_am() without having done repository setup at all. This
is due to 99caeed05 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09).
Before cmd_am() calls parse_options(), though, it runs a few
other setup functions. One of these is am_state_init(),
which uses git_pathdup() to set up the default rebase-apply
path. But calling git_pathdup() when we haven't done
repository setup will fall back to using ".git". That's
mostly harmless (since we won't use the value anyway), but
is forbidden since b1ef400eec ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20), and we now BUG().
We can't easily move that setup to after the parse_options()
call; the point is to set up defaults that are overwritten
by the option parsing. Instead, we'll detect the "-h" case
early and show the usage then. This matches the behavior of
other builtins which have a similar setup-ordering issue
(e.g., git-branch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git sometimes gives an advice in a rhetorical question that does
not require an answer, which can confuse new users and non native
speakers. Attempt to rephrase them.
* ja/do-not-ask-needless-questions:
git-filter-branch: be more direct in an error message
read-tree -m: make error message for merging 0 trees less smart aleck
usability: don't ask questions if no reply is required
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
xfopen()
- provides error details
- explains error on reading, or writing, or whatever operation
- has l10n support
- prints file name in the error
Some of these are missing in the places that are replaced with xfopen(),
which is a clear win. In some other places, it's just less code (not as
clearly a win as the previous case but still is).
The only slight regresssion is in remote-testsvn, where we don't report
the file class (marks files) in the error messages anymore. But since
this is a _test_ svn remote transport, I'm not too concerned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few codepaths in "checkout" and "am" working on an unborn branch
tried to access an uninitialized piece of memory.
* rs/checkout-am-fix-unborn:
am: check return value of resolve_refdup before using hash
checkout: check return value of resolve_refdup before using hash
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
The codepath in "git am" that is used when running "git rebase"
leaked memory held for the log message of the commits being rebased.
* jk/am-leakfix:
am: shorten ident_split variable name in get_commit_info()
am: simplify allocations in get_commit_info()
am: fix commit buffer leak in get_commit_info()
There has been a bug report by a corporate user that stated that
"spelling mistake of stash followed by a yes prints character 'y'
infinite times."
This analysis was false. When the spelling of a command contains
errors, the git program tries to help the user by providing candidates
which are close to the unexisting command. E.g Git prints the
following:
git: 'stahs' is not a git command. See 'git --help'.
Did you mean this?
stash
and then exits.
The problem with this hint is that it is not formally indicated as an
hint and the user is in fact encouraged to reply to the question,
whereas the Git command is already finished.
The user was unlucky enough that it was the command he was looking
for, and replied "yes" on the command line, effectively launching the
`yes` program.
The initial error is that the Git programs, when launched in
command-line mode (without interaction) must not ask questions,
because these questions would normally require a user input as a reply
that they won't handle indeed. That's a source of confusion on UX
level.
To improve the general usability of the Git suite, the following rule
was applied:
if the sentence
* appears in a non-interactive session
* is printed last before exit
* is a question addressing the user ("you")
the sentence is turned into affirmative and proposes the option.
The basic rewording of the question sentences has been extended to
other spots found in the source.
Requested at https://github.com/git/git-scm.com/issues/999 by rpai1
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to convert parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename this function and convert it to take a pointer to struct
object_id.
This is a prerequisite for converting get_reference, which is needed to
convert parse_object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the lookup_tree function to take a pointer to struct object_id.
The commit was created with manual changes to tree.c, tree.h, and
object.c, plus the following semantic patch:
@@
@@
- lookup_tree(EMPTY_TREE_SHA1_BIN)
+ lookup_tree(&empty_tree_oid)
@@
expression E1;
@@
- lookup_tree(E1.hash)
+ lookup_tree(&E1)
@@
expression E1;
@@
- lookup_tree(E1->hash)
+ lookup_tree(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to read, or parse, the file, we still want to close the file
descriptor and release the strbuf.
Reported via Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If resolve_refdup() fails it returns NULL and possibly leaves its hash
output parameter untouched. Make sure to use it only if the function
succeeded, in order to avoid accessing uninitialized memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local ident_split variable is often mentioned three
times per line when dealing with its begin/end pointer
pairs. Let's use a shorter name which lets us get rid of
some long lines. Since this is a short self-contained
function, readability doesn't suffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we call split_ident_line(), we have several begin/end
pairs for various parts of the ident. We then copy each into
a strbuf to create a single string, and then detach that
string. We can instead skip the strbuf entirely and just
duplicate the strings directly.
This is shorter, and it makes it more obvious that we are
not leaking the strbuf (we were not before, because every
code path either died or hit a strbuf_detach).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling logmsg_reencode() may allocate a buffer for the
commit message (because we need to load it from disk, or
because it needs re-encoded). We must "unuse" it afterwards
to free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While handy, "git_path()" is a dangerous function to use as a
callsite that uses it safely one day can be broken by changes
to other code that calls it. Reduction of its use continues.
* jk/war-on-git-path:
am: drop "dir" parameter from am_state_init
replace strbuf_addstr(git_path()) with git_path_buf()
replace xstrdup(git_path(...)) with git_pathdup(...)
use git_path_* helper functions
branch: add edit_description() helper
bisect: add git_path_bisect_terms helper
"git rebase" learns "--signoff" option.
* gb/rebase-signoff:
rebase: pass --[no-]signoff option to git am
builtin/am: fold am_signoff() into am_append_signoff()
builtin/am: honor --signoff also when --rebasing
Various small fixes.
* rs/misc-cppcheck-fixes:
server-info: avoid calling fclose(3) twice in update_info_file()
files_for_each_reflog_ent_reverse(): close stream and free strbuf on error
am: close stream on error, but not stdin
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only caller of this function passes in a static buffer
returned from git_path(). This looks dangerous at first
glance, but turns out to be OK because the first thing we do
is xstrdup() the result.
Let's turn this into a git_pathdup(). That's slightly more
efficient (no extra copy), and makes it easier to audit for
dangerous git_path() invocations.
Since there's only a single caller, let's just set this
default path inside the init function. That makes the memory
ownership clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
