These are hexadecimal and binary representation of the short object
name given to the callchain as its input. Rename them with _pfx
suffix to make it clear they are prefixes, and call them hex and bin
respectively.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the logic to find object(s) that match a given prefix inside
a single pack into a separate helper function, and give it a bit more
comment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable points at the element we are currently looking at, and
does not have anything to do with the current time which the name
"now" implies.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only two callers, and they will benefit from being able to
pass disambiguation hints to underlying get_sha1_with_context() API
once it happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only external caller is setup.c that tries to give a nicer error
message when an object name is misspelt (e.g. "HEAD:cashe.h").
Retire it and give the caller a dedicated and more intuitive API
function maybe_die_on_misspelt_object_name().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Julia Lawall noticed that in linux-next repository the commit object
60d5c9f5 (shown with the default abbreviation width baked into "git
blame") in output from
$ git blame -L 3675,3675 60d5c9f5b -- \
drivers/staging/brcm80211/brcmfmac/wl_iw.c
is no longer unique in the repository, which results in "short SHA1
60d5c9f5 is ambiguous".
Compute the minimum abbreviation width that ensures uniqueness when
the user did not specify the --abbrev option to avoid this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regardless of where in the directory hierarchy you are, "-" on the
command line means the standard input. The old code knew too much
about how the low level machinery uses paths to read from the
working tree and did not bother to have the same check for "-" when
the command is run from the top-level.
Unify the codepaths for subdirectory case and toplevel case into one
and make it clearer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" takes exactly two paths, not pathspecs, and
has its own way queue_diff() to populate the diff_queue. Do not
call diff_tree_setup_paths(), pretending as it takes pathspecs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split a rather heavy-ish "git completion" script out to create a
separate "git prompting" script, to help lazy-autoloading of the
completion part while making prompting part always available.
Teach "git submodule" deal with nested submodule structure where a
module is contained within a module whose origin is specified as a
relative URL to its superproject's origin.
When "--simplify-merges/by-decoration" is given together with
"--first-parent" to "git log", the combination of these options
makes the simplification logic to use in-core commit objects that
haven't been examined for relevance, either producing incorrect
result or taking too long to produce any output. Teach the
simplification logic to ignore commits that the first-parent
traversal logic ignored when both are in effect to work around the
issue.
"git add" allows adding a regular file to the path where a submodule
used to exist, but "git update-index" does not allow an equivalent
operation to Porcelain writers.
Attempt to optimize matching with an exclude pattern with a deep
directory hierarchy by taking the part that specifies leading path
without wildcard literally.
Setting this to a URL prefix instead of a path to a local directory allows
git-help --web to work even when HTML docs aren't locally installed, by
pointing the browser at a copy accessible on the web. For example,
[help]
format = html
htmlpath = http://git-scm.com/docs
will use the publicly available documentation on the git homepage.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If set in git-config, help.htmlpath overrides system_path(GIT_HTML_PATH)
which was compiled in. This allows users to repoint system-wide git at
their own copy of the documentation without recompiling.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct used to get the return code was flawed, in that
errors in the &&-chain before the semicolon were not caught. Use
the standard test_expect_code instead.
Set PATH in a subshell instead of relying on the bashism of
setting it just for a single command.
And fix the grep line so it doesn't worry about grep segfaults,
and doesn't fail for i18n issues.
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original t9800 test code has a mix of assorted topics, some
of which are big enough to deserve their own homes.
Interdependencies between the topics make it confusing when
trying to study one in isolation. And it takes so long to run
that debugging an individual test is difficult.
Split out three big chunks of tests into their own files:
t9812-git-p4-wildcards.sh gets the 8 p4 wildcard tests
t9813-git-p4-preserve-users.sh gets the 4 --preserve-user tests
t9814-git-p4-rename.sh gets the 2 copy and rename tests
Test 9800 execution time drops from 29 sec to 9 sec. The
sequential time to run all tests is a slower due to the three
extra p4d startup/shutdown sequences, but the overall parallel
execution time is about the same, at 52 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience, leave one in place at the end of each
test so that it is not necessary to build a new one. This
makes it consistent with $cli.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Msysgit testing showed that the source file found by copy
detection is indeterminate when there are multiple sources
to choose from. This appears to be valid. Adjust the test
so that it passes if it finds any of the potential copy sources.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For temporary files that are created in the top-level TRASH_DIRECTORY,
trust that the tests do not chdir except in subshells, and avoid some
quoting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The p4 program is finicky about making sure the recorded client Root
matches the current working directory. The way it discovers the latter
seems to be to inspect shell variable $PWD. This could involve symlinks,
that while leading to the same place as the client Root, look different,
and cause p4 to fail.
Resolve all client paths using "test-path-utils real_path $path". This
removes ".." and resolves all symlinks.
Discovered while running with --root=/dev/shm, which is a link to
/run/shm.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running tests at high parallelism on a slow machine, 5 sec is
not enough to wait for p4d to start. Change it to 5 minutes,
adding an environment variable P4D_START_PATIENCE to shrink
that if needed in automated test environments.
Also check if the pid of the p4d that we started is still
around. If not, quit waiting for it immediately.
Remove all the confusing && chaining and simplify the code.
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A path containing a space must be quoted when used as an
argument to either the copy or rename commands (because
unlike other commands, the path is not the final thing on
the line for those commands).
Commit 6280dfdc3b (fast-export: quote paths in output,
2011-08-05) previously attempted to fix fast-export's
quoting by passing all paths through quote_c_style().
However, that function does not consider the space to be a
character which requires quoting, so let's special-case the
space inside print_path(). This will cause space-containing
paths to also be quoted in other commands where such quoting
is not strictly necessary, but it does not hurt to do so.
The test from 6280dfdc3b did not detect this because, while
it does introduce renames in the export stream, it does not
actually turn on rename detection, so they were presented as
pairs of deletions/adds. Using "-M" reveals the bug.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the symmetrical feature to the "File:" export support in the previous
patch. Download files from the wiki as needed, and feed them into the
fast-import stream. Import both the file itself, and the corresponding
description page.
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr>
Signed-off-by: NGUYEN Kim Thuat <Kim-Thuat.Nguyen@ensimag.imag.fr>
Signed-off-by: ROUCHER IGLESIAS Javier <roucherj@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current version of the git-remote-mediawiki supports only import and
export of plain wiki pages. This patch adds the functionality to export
file attachments (i.e. the content of the File: MediaWiki namespace),
which are also exposed by MediaWiki API.
This requires a recent version of MediaWiki::API (Version 0.37 works.
Version 0.34 doesn't).
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr>
Signed-off-by: NGUYEN Kim Thuat <Kim-Thuat.Nguyen@ensimag.imag.fr>
Signed-off-by: ROUCHER IGLESIAS Javier <roucherj@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The use of this statement is generally discouraged, and is too intrusive
for us: it forces the HTTP requests made by the API to contain only valid
UTF-8 characters. This would break the upload of binary files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we're there, simplify the code a bit: since log --format=%s anyway
shows the subject line as a single line, no need to split to take the
first line.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test for likely breakages in t3404, including successful reordering of
non-conflicting changes with a new root, correct preservation of commit
message and author in a root commit when it is squashed with the
sentinel, and presence of the sentinel following a conflicting
cherry-pick of a new root.
Remove test_must_fail for git rebase --root without --onto from t3412 as
this case will now be successfully handled by an implicit git rebase -i.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow --root to be specified to rebase -i without --onto, making it
possible to edit and re-order all commits right back to the root(s).
If there is a conflict to be resolved when applying the first change,
the user will expect a sane index and working tree to get sensible
behaviour from git-diff and friends, so create a sentinel commit with an
empty tree to rebase onto. Automatically squash the sentinel with any
commits rebased directly onto it, so they end up as root commits in
their own right and retain their authorship and commit message.
Implicitly use rebase -i for non-interactive rebase of --root without
an --onto argument now that rebase -i can correctly do this.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
