When all files from some subdirectory were renamed to the root
directory, the directory rename heuristics would fail to detect that
as a rename/merge of the subdirectory to the root directory, which has
been corrected.
* en/merge-recursive-directory-rename-fixes:
t604[236]: do not run setup in separate tests
merge-recursive: fix merging a subdirectory into the root directory
merge-recursive: clean up get_renamed_dir_portion()
We allow renaming all entries in e.g. a directory named z/ into a
directory named y/ to be detected as a z/ -> y/ rename, so that if the
other side of history adds any files to the directory z/ in the mean
time, we can provide the hint that they should be moved to y/.
There is no reason to not allow 'y/' to be the root directory, but the
code did not handle that case correctly. Add a testcase and the
necessary special checks to support this case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dscho noted a few things making this function hard to follow.
Restructure it a bit and add comments to make it easier to follow. The
restructurings include:
* There was a special case if-check at the end of the function
checking whether someone just renamed a file within its original
directory, meaning that there could be no directory rename involved.
That check was slightly convoluted; it could be done in a more
straightforward fashion earlier in the function, and can be done
more cheaply too (no call to strncmp).
* The conditions for advancing end_of_old and end_of_new before
calling strchr were both confusing and unnecessary. If either
points at a '/', then they need to be advanced in order to find the
next '/'. If either doesn't point at a '/', then advancing them one
char before calling strchr() doesn't hurt. So, just rip out the
if conditions and advance both before calling strchr().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive machiery is one of the most complex parts of
the system that accumulated cruft over time. This large series
cleans up the implementation quite a bit.
* en/merge-recursive-cleanup: (26 commits)
merge-recursive: fix the fix to the diff3 common ancestor label
merge-recursive: fix the diff3 common ancestor label for virtual commits
merge-recursive: alphabetize include list
merge-recursive: add sanity checks for relevant merge_options
merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_*
merge-recursive: split internal fields into a separate struct
merge-recursive: avoid losing output and leaking memory holding that output
merge-recursive: comment and reorder the merge_options fields
merge-recursive: consolidate unnecessary fields in merge_options
merge-recursive: move some definitions around to clean up the header
merge-recursive: rename merge_options argument to opt in header
merge-recursive: rename 'mrtree' to 'result_tree', for clarity
merge-recursive: use common name for ancestors/common/base_list
merge-recursive: fix some overly long lines
cache-tree: share code between functions writing an index as a tree
merge-recursive: don't force external callers to do our logging
merge-recursive: remove useless parameter in merge_trees()
merge-recursive: exit early if index != head
Ensure index matches head before invoking merge machinery, round N
merge-recursive: remove another implicit dependency on the_repository
...
In commit 8e4ec337 ("merge-recursive: fix the diff3 common ancestor
label for virtual commits", 2019-10-01), which was a fix to commit
743474cbfa ("merge-recursive: provide a better label for diff3
common ancestor", 2019-08-17), the label for the common ancestor was
changed from always being
"merged common ancestors"
to instead be based on the number of merge bases and whether the merge
base was a real commit or a virtual one:
>=2: "merged common ancestors"
1, via merge_recursive_generic: "constructed merge base"
1, otherwise: <abbreviated commit hash>
0: "<empty tree>"
The handling for "constructed merge base" worked by allowing
opt->ancestor to be set in merge_recursive_generic(), so we paid
attention to the setting of that variable in merge_recursive_internal().
Now, for the outer merge, the code flow was simply the following:
ancestor_name = "merged merge bases"
loop over merge_bases: merge_recursive_internal()
The first merge base not needing recursion would determine its own
ancestor_name however necessary and thus run
ancestor_name = $SOMETHING
empty loop over merge_bases...
opt->ancestor = ancestor_name
merge_trees_internal()
Now, the next set of merge_bases that would need to be merged after this
particular merge had completed would note that opt->ancestor has been
set to something (to a local ancestor_name variable that has since been
popped off the stack), and thus it would run:
... else if (opt->ancestor) {
ancestor_name = opt->ancestor; /* OOPS! */
loop over merge_bases: merge_recursive_internal()
opt->ancestor = ancestor_name
merge_trees_internal()
This resulted in garbage strings being printed for the virtual merge
bases, which was visible in git.git by just merging commit b744c3af07
into commit 6d8cb22a4f. There are two ways to fix this: set
opt->ancestor to NULL after using it to avoid re-use, or add a
!opt->priv->call_depth check to the if block for using a pre-defined
opt->ancestor. Apply both fixes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by list_for_each_entry in the Linux kernel.
Once again, these are somewhat compromised usability-wise
by compilers lacking __typeof__ support.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 743474cbfa ("merge-recursive: provide a better label for
diff3 common ancestor", 2019-08-17), the label for the common ancestor
was changed from always being
"merged common ancestors"
to instead be based on the number of merge bases:
>=2: "merged common ancestors"
1: <abbreviated commit hash>
0: "<empty tree>"
Unfortunately, this did not take into account that when we have a single
merge base, that merge base could be fake or constructed. In such
cases, this resulted in a label of "00000000". Of course, the previous
label of "merged common ancestors" was also misleading for this case.
Since we have an API that is explicitly about creating fake merge base
commits in merge_recursive_generic(), we should provide a better label
when using that API with one merge base. So, when
merge_recursive_generic() is called with one merge base, set the label
to:
"constructed merge base"
Note that callers of merge_recursive_generic() include the builtin
commands git-am (in combination with git apply --build-fake-ancestor),
git-merge-recursive, and git-stash.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the working tree has:
- bar (directory)
- bar/file (file)
- foo (symlink to .)
(note that lstat() for "foo/bar" would tell us that it is a directory)
and the user merges a commit that deletes the foo symlink and instead
contains:
- bar (directory, as above)
- bar/file (file, as above)
- foo (directory)
- foo/bar (file)
the merge should happen without requiring user intervention. However,
this does not happen.
This is because dir_in_way(), when checking the working tree, thinks
that "foo/bar" is a directory. But a symlink should be treated much the
same as a file: since dir_in_way() is only checking to see if there is a
directory in the way, we don't want symlinks in leading paths to
sometimes cause dir_in_way() to return true.
Teach dir_in_way() to also check for symlinks in leading paths before
reporting whether a directory is in the way.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other than cache.h which needs to appear first, and merge-recursive.h
which I want to be second so that we are more likely to notice if
merge-recursive.h has any missing includes, the rest of the list is
long and easier to look through if it's alphabetical.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are lots of options that callers can set, yet most have a limited
range of valid values, some options are meant for output (e.g.
opt->obuf, which is expected to start empty), and callers are expected
to not set opt->priv. Add several sanity checks to ensure callers
provide sane values.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I want to implement the same outward facing API as found within
merge-recursive.h in a different merge strategy. However, that makes
names like MERGE_RECURSIVE_{NORMAL,OURS,THEIRS} look a little funny;
rename to MERGE_VARIANT_{NORMAL,OURS,THEIRS}.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_options has several internal fields that should not be set or read
by external callers. This just complicates the API. Move them into an
opaque merge_options_internal struct that is defined only in
merge-recursive.c and keep these out of merge-recursive.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If opt->buffer_output is less than 2, then merge_trees(),
merge_recursive(), and merge_recursive_generic() are all supposed to
flush the opt->obuf output buffer to stdout and release any memory it
holds. merge_trees() did not do this. Move the logic that handles this
for merge_recursive_internal() to merge_finalize() so that all three
methods handle this requirement.
Note that this bug didn't cause any problems currently, because there
are only two callers of merge_trees() right now (a git grep for
'merge_trees(' is misleading because builtin/merge-tree.c also defines a
'merge_tree' function that is unrelated), and only one of those is
called with buffer_output less than 2 (builtin/checkout.c), but it set
opt->verbosity to 0, for which there is only currently one non-error
message that would be shown: "Already up to date!". However, that one
message can only occur when the merge is utterly trivial (the merge base
tree exactly matches the merge tree), and builtin/checkout.c already
attempts a trivial merge via unpack_trees() before falling back to
merge_trees().
Also, if opt->buffer_output is 2, then the caller is responsible to
handle showing any output in opt->obuf and for free'ing it. This
requirement might be easy to overlook, so add a comment to
merge-recursive.h pointing it out. (There are currently two callers
that set buffer_output to 2, both in sequencer.c, and both of which
handle this correctly.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge_options struct had lots of fields, making it a little
imposing, but the options naturally fall into multiple different groups.
Grouping similar options and adding a comment or two makes it easier to
read, easier for new folks to figure out which options are related, and
thus easier for them to find the options they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We provided users with the ability to state whether they wanted rename
detection, and to put a limit on how much CPU would be spent. Both of
these fields had multiple configuration parameters for setting them,
with one being a fallback and the other being an override. However,
instead of implementing the logic for how to combine the multiple
source locations into the appropriate setting at config loading time,
we loaded and tracked both values and then made the code combine them
every time it wanted to check the overall value. This had a few
minor drawbacks:
* it seems more complicated than necessary
* it runs the risk of people using the independent settings in the
future and breaking the intent of how the options are used
together
* it makes merge_options more complicated than necessary for other
potential users of the API
Fix these problems by moving the logic for combining the pairs of
options into a single value; make it apply at time-of-config-loading
instead of each-time-of-use.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No substantive code changes (view this with diff --color-moved), but
a few small code cleanups:
* Move structs and an inline function only used by merge-recursive.c
into merge-recursive.c
* Re-order function declarations to be more logical
* Add or fix some explanatory comments
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not at all clear what 'mr' was supposed to stand for, at least not
to me. Pick a clearer name for this variable.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_trees(), merge_recursive(), and merge_recursive_generic() in
their function headers used four different names for the merge base or
list of merge bases they were passed:
* 'common'
* 'ancestors'
* 'ca'
* 'base_list'
They were able to refer to it four different ways instead of only three
by using a different name in the signature for the .c file than the .h
file. Change all of these to 'merge_base' or 'merge_bases'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No substantive code change, just add some line breaks to fix lines that
have grown in length due to various refactorings. Most remaining lines
of excessive length in merge-recursive include error messages and it's
not clear that splitting those improves things.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_tree_from_memory() appeared to be a merge-recursive special that
basically duplicated write_index_as_tree(). The two have a different
signature, but the bigger difference was just that write_index_as_tree()
would always unconditionally read the index off of disk instead of
working on the current in-memory index. So:
* split out common code into write_index_as_tree_internal()
* rename write_tree_from_memory() to write_inmemory_index_as_tree(),
make it call write_index_as_tree_internal(), and move it to
cache-tree.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternatively, you can view this as "make the merge functions behave
more similarly." merge-recursive has three different entry points:
merge_trees(), merge_recursive(), and merge_recursive_generic(). Two of
these would call diff_warn_rename_limit(), but merge_trees() didn't.
This lead to callers of merge_trees() needing to manually call
diff_warn_rename_limit() themselves. Move this to the new
merge_finalize() function to make sure that all three entry points run
this function.
Note that there are two external callers of merge_trees(), one in
sequencer.c and one in builtin/checkout.c. The one in sequencer.c is
cleaned up by this patch and just transfers where the call to
diff_warn_rename_limit() is made; the one in builtin/checkout.c is for
switching to a different commit and in the very rare case where the
warning might be triggered, it would probably be helpful to include
(e.g. if someone is modifying a file that has been renamed in moving to
the other commit, but there are so many renames between the commits that
the limit kicks in and none are detected, it may help to have an
explanation about why they got a delete/modify conflict instead of a
proper content merge in a renamed file).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_trees() took a results parameter that would only be written when
opt->call_depth was positive, which is never the case now that
merge_trees_internal() has been split from merge_trees(). Remove the
misleading and unused parameter from merge_trees().
While at it, add some comments explaining how the output of
merge_trees() and merge_recursive() differ.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had a rule to enforce that the index matches head, but it was found
at the beginning of merge_trees() and would only trigger when
opt->call_depth was 0. Since merge_recursive() doesn't call
merge_trees() until after returning from recursing, this meant that the
check wasn't triggered by merge_recursive() until it had first finished
all the intermediate merges to create virtual merge bases. That is a
potentially huge amount of computation (and writing of intermediate
merge results into the .git/objects directory) before it errors out and
says, in effect, "Sorry, I can't do any merging because you have some
local changes that would be overwritten."
Further, not enforcing this requirement earlier allowed other bugs (such
as an unintentional unconditional dropping and reloading of the index in
merge_recursive() even when no recursion was necessary), to mask bugs in
other callers (which were fixed in the commit prior to this one).
Make sure we do the index == head check at the beginning of the merge,
and error out immediately if it fails. While we're at it, fix a small
leak in the show-the-error codepath.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d7cf3a96e9 ("merge-recursive.c: remove implicit dependency on
the_repository", 2019-01-12) and follow-ups like commit 34e7771bc6
("Use the right 'struct repository' instead of the_repository",
2019-06-27), removed most implicit uses of the_repository. Convert
calls to get_commit_tree() to instead use repo_get_commit_tree() to get
rid of another.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a 'free_buf' label to which all but one of the error paths in
update_file_flags() jump; that error case involves a NULL buf and is
thus not a memory leak. However, make that error case execute the same
deallocation code anyway so that if anyone adds any additional memory
allocations or deallocations, then all error paths correctly deallocate
resources.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve code readability by introducing an enum to replace the
not-quite-boolean values taken on by detect_directory_renames.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 7ca56aa076 ("merge-recursive: add a label for ancestor",
2010-03-20), a label was added for the '||||||' line to make it have
the more informative heading '|||||| merged common ancestors', with
the statement:
It would be nicer to use a more informative label. Perhaps someone
will provide one some day.
This chosen label was perfectly reasonable when recursiveness kicks in,
i.e. when there are multiple merge bases. (I can't think of a better
label in such cases.) But it is actually somewhat misleading when there
is a unique merge base or no merge base. Change this based on the
number of merge bases:
>=2: "merged common ancestors"
1: <abbreviated commit hash>
0: "<empty tree>"
Tests have also been added to check that we get the right ancestor name
for each of the three cases.
Also, since merge_recursive() and merge_trees() have polar opposite
pre-conditions for opt->ancestor, document merge_recursive()'s
pre-condition with an assertion. (An assertion was added to
merge_trees() already a few commits ago.) The differences in
pre-conditions stem from two factors: (1) merge_trees() does not recurse
and thus does not have multiple sub-merges to worry about -- each of
which would require a different value for opt->ancestor, (2)
merge_trees() is only passed trees rather than commits and thus cannot
internally guess as good of a label. Thus, while external callers of
merge_trees() are required to provide a non-NULL opt->ancestor,
merge_recursive() expects to set this value itself.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always want our conflict hunks to be labelled so that users can know
where each came from. The previous commit fixed the one caller in the
codebase which was not setting opt->ancestor (and thus not providing a
label for the "merge base" conflict hunk in diff3-style conflict
markers); add an assertion to prevent future codepaths from also
overlooking this requirement.
Enforcing this requirement also allows us to simplify the code for
labelling the conflict hunks by no longer checking if the ancestor label
is NULL.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 8daec1df03 ("merge-recursive: switch from (oid,mode) pairs
to a diff_filespec", 2019-04-05), an assertion on a->path && b->path
was added for code readability to document that these both needed to be
non-NULL at this point in the code. However, the subsequent lines also
read o->path, so it should be included in the assert.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"merge-recursive" hit a BUG() when building a virtual merge base
detected a directory rename.
* en/disable-dir-rename-in-recursive-merge:
merge-recursive: avoid directory rename detection in recursive case
Ever since commit 8c8e5bd6eb ("merge-recursive: switch directory
rename detection default", 2019-04-05), the default handling with
directory rename detection was to report a conflict and leave unstaged
entries in the index. However, when creating a virtual merge base in
the recursive case, we absolutely need a tree, and the only way a tree
can be written is if we have no unstaged entries -- otherwise we hit a
BUG().
There are a few fixes possible here which at least fix the BUG(), but
none of them seem optimal for other reasons; see the comments with the
new testcase 13e in t6043 for details (which testcase triggered a BUG()
prior to this patch). As such, just opt for a very conservative and
simple choice that is still relatively reasonable: have the recursive
case treat 'conflict' as 'false' for opt->detect_directory_renames.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of places where 'struct repository' is already passed
around, but the_repository is still used. Use the right repo.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 8daec1df03 ("merge-recursive: switch from (oid,mode) pairs
to a diff_filespec", 2019-04-05), we actually switched from
(oid,mode,path) triplets to a diff_filespec -- but most callsites in the
patch only needed to worry about oid and mode so the commit message
focused on that. The oversight in the commit message apparently spilled
over to the code as well; one of the dozen or so callsites accidentally
dropped the setting of the path in the conversion. Restore the path
setting in that location.
Also, this pointed out that our testsuite was lacking a good rename/add
test, at least one that involved the need for merge content with the
rename. Add such a test, and since rename/add vs. add/rename could
possibly be important, redo the merge the opposite direction to make
sure we don't have issues with the direction of the merge. These
testcases failed before restoring the setting of path, but with the
paths appropriately set the testcases both pass.
Reported-by: Ben Humphreys <behumphreys@atlassian.com>
Based-on-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: Ben Humphreys <behumphreys@atlassian.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved. As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users. This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.
* en/merge-directory-renames:
merge-recursive: switch directory rename detection default
merge-recursive: give callers of handle_content_merge() access to contents
merge-recursive: track information associated with directory renames
t6043: fix copied test description to match its purpose
merge-recursive: switch from (oid,mode) pairs to a diff_filespec
merge-recursive: cleanup handle_rename_* function signatures
merge-recursive: track branch where rename occurred in rename struct
merge-recursive: remove ren[12]_other fields from rename_conflict_info
merge-recursive: shrink rename_conflict_info
merge-recursive: move some struct declarations together
merge-recursive: use 'ci' for rename_conflict_info variable name
merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
merge-recursive: rename diff_filespec 'one' to 'o'
merge-recursive: rename merge_options argument from 'o' to 'opt'
Use 'unsigned short' for mode, like diff_filespec does
"maybe" pointer in 'struct commit' is tricky because it can be lazily
initialized to take advantage of commit-graph if available. This makes
it not safe to access directly.
This leads to a rule in commit.cocci to rewrite 'x->maybe_tree' to
'get_commit_tree(x)'. But that rule alone could lead to incorrectly
rewrite assignments, e.g. from
x->maybe_tree = yes
to
get_commit_tree(x) = yes
Because of this we have a second rule to revert this effect. Szeder
found out that we could do better by performing the assignment rewrite
rule first, then the remaining is read-only access and handled by the
current first rule.
For this to work, we need to transform "x->maybe_tree = y" to something
that does NOT contain "x->maybe_tree" to avoid the original first
rule. This is where set_commit_tree() comes in.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
