If a merge can be fast-forwarded then make sure that we still edit the
commit message if the user specifies -c. The implementation follows the
same pattern that is used for ordinary rewords that are fast-forwarded.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is an error when removing the state directory then we should
report it. This matches what the non-interactive rebase does.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update a code comment that referred to those files as if they were still
there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
"git cherry-pick" run with the "-x" or the "--signoff" option used
to (and more importantly, ought to) clean up the commit log message
with the --cleanup=space option by default, but this has been
broken since late 2017. This has been fixed.
* pw/sequencer-cleanup-with-signoff-x-fix:
sequencer: fix cleanup with --signoff and -x
"git cherry-pick --options A..B", after giving control back to the
user to ask help resolving a conflicted step, did not honor the
options it originally received, which has been corrected.
* pw/cherry-pick-continue:
cherry-pick --continue: remember options
cherry-pick: demonstrate option amnesia
sequencer: break some long lines
The scripted version of "git rebase -i" wrote and rewrote the todo
list many times during a single step of its operation, and the
recent C-rewrite made a faithful conversion of the logic to C. The
implementation has been updated to carry necessary information
around in-core to avoid rewriting the same file over and over
unnecessarily.
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
This is in preparation for using `struct rebase_options` when parsing
options in cmd_rebase__interactive(). Using a string for onto,
restrict_revision and upstream, was a hangover from the scripted version
of rebase. The functions that use these variables are updated to take a
`struct commit`.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the checkout runs in a separate process our index will be out of date
so it should be discarded. The existing callers are not doing this
consistently so do it here to avoid the callers having to worry about
it.
This fixes some test failures that happen if do_interactive_rebase() is
called without forking rebase--interactive which we will implement
shortly. Running
git rebase -i master topic
starting on master created empty todo lists because all the commits in
topic were marked as cherry-picks. After topic was checked out in
prepare_branch_to_be_rebased() the working tree contained the contents
from topic but the index contained master and the cache entries were
still valid. This meant that diff_populate_filespec() which loads the
blobs when calculating patch-id's ended up reading the contents for
master from the working tree which actually contained topic.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
Fix a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specifies an explicit cleanup mode then save and restore it
so that it is preserved by 'git cherry-pick --continue'.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit 356ee4659b ("sequencer: try to commit without forking 'git
commit'", 2017-11-24) when --signoff or -x were given on the command
line the commit message was cleaned up with --cleanup=space or
commit.cleanup if it was set. Unfortunately this behavior was lost when
I implemented committing without forking. Fix this and add some tests to
catch future regressions.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user commits a conflict resolution using `git commit` in the
middle of a sequence of cherry-picks/reverts then `git status` missed
the fact that a cherry-pick/revert is still in progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking or reverting a sequence of commits and if the final
pick/revert has conflicts and the user uses `git commit` to commit the
conflict resolution and does not run `git cherry-pick --continue` then
the sequencer state is left behind. This can cause problems later. In my
case I cherry-picked a sequence of commits the last one of which I
committed with `git commit` after resolving some conflicts, then a while
later, on a different branch I aborted a revert which rewound my HEAD to
the end of the cherry-pick sequence on the previous branch. Avoid this
potential problem by removing the sequencer state if we're committing or
resetting the final pick in a sequence.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remember --allow-empty, --allow-empty-message and
--keep-redundant-commits when cherry-pick stops for a conflict
resolution.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reformat save_opts() to remove excessively long lines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase simply complains about an "invalid line" when the
object hash of, say, a `pick` line could not be parsed.
Let's tell the user what happened in a little more detail.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
As transform_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes complete_action() to use edit_todo_list(), now that it can
handle the initial edit of the todo list.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edit_todo_list() is changed to work on a todo_list, and to handle the
initial edition of the todo list (ie. making a backup of the todo
list).
It does not check for dropped commits yet, as todo_list_check() does not
take the commits that have already been processed by the rebase (ie. the
todo list is edited in the middle of a rebase session).
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the writing of the comment "Rebase $shortrevisions onto
$shortonto ($command_count commands)" from todo_list_write_to_file() to
append_todo_help().
shortrevisions, shortonto, and command_count are passed as parameters to
append_todo_help().
During the initial edit of the todo list, shortrevisions and shortonto
are not NULL. Therefore, if shortrevisions or shortonto is NULL, then
edit_todo would be true, otherwise it would be false. Thus, edit_todo
is removed from the parameters of append_todo_help().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like complete_action(), edit_todo_list() used a
function (transform_todo_file()) that read the todo list from the disk
and wrote it back, resulting in useless disk accesses.
This changes edit_todo_list() to call directly todo_list_write_to_file()
instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors skip_unnecessary_picks() to work on a todo_list. As this
function is only called by complete_action() (and thus is not used by
rebase -p), the file-handling logic is completely dropped here.
Instead of truncating the todo list’s buffer, the items are moved to
the beginning of the list, eliminating the need to reparse the list.
This also means its buffer cannot be directly written to the disk.
rewrite_file() is then removed, as it is now unused.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As rearrange_squash_in_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way, and the error
handling is slightly improved.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As sequencer_add_exec_commands() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
complete_action() used functions that read the todo-list file, made some
changes to it, and wrote it back to the disk.
The previous commits were dedicated to separate the part that deals with
the file from the actual logic of these functions. Now that this is
done, we can call directly the "logic" functions to avoid useless file
access.
The parsing of the list has to be done by the caller. If the buffer of
the todo list provided by the caller is empty, a `noop' command is
directly added to the todo list, without touching the buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sequencer_make_script() write its script to a strbuf (ie. the
buffer of a todo_list) instead of a FILE. This reduce the amount of
read/write made by rebase interactive.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors rearrange_squash() to work on a todo_list to avoid
redundant reads and writes. The function is renamed
todo_list_rearrange_squash().
The old version created a new buffer, which was directly written to the
disk. This new version creates a new item list by just copying items
from the old item list, without creating a new buffer. This eliminates
the need to reparse the todo list, but this also means its buffer cannot
be directly written to the disk.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, rearrange_squash_in_todo_file().
complete_action() still uses rearrange_squash_in_todo_file() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors sequencer_add_exec_commands() to work on a todo_list to
avoid redundant reads and writes to the disk.
Instead of inserting the `exec' commands between the other commands and
re-parsing the buffer at the end, they are appended to the buffer once,
and a new list of items is created. Items from the old list are copied
across and new `exec' items are appended when necessary. This
eliminates the need to reparse the buffer, but this also means we have
to use todo_list_write_to_disk() to write the file.
todo_list_add_exec_commands() and sequencer_add_exec_commands() are
modified to take a string list instead of a string -- one item for each
command. This makes it easier to insert a new command to the todo list
for each command to execute.
sequencer_add_exec_commands() still reads the todo list from the disk,
as it is needed by rebase -p.
complete_action() still uses sequencer_add_exec_commands() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d0aaa46fd3 ("commit: move empty message checks to libgit",
2017-11-10) removes the last use of 'sign_off_header' outside of
the "sequencer.c" source file. Remove the extern declaration from
the header file and mark the definition of the symbol with the
static keyword.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
This refactors check_todo_list() to work on a todo_list to avoid
redundant reads and writes to the disk. The function is renamed
todo_list_check(). The parsing of the two todo lists is left to the
caller.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, check_todo_list_from_file(). It reads the file
from the disk, parses it, pass the todo_list to todo_list_check(), and
writes it back to the disk.
As get_missing_commit_check_level() and the enum
missing_commit_check_level are no longer needed inside of sequencer.c,
they are moved to rebase-interactive.c, and made static again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new function to recreate the text of a todo list from
its commands and write it to a file. This will be useful as the next
few commits will change the use of the buffer in struct todo_list so it
will no longer be a mirror of the file on disk.
This functionality already exists in todo_list_transform(), but this
function was made to replace the buffer of a todo list, which is not
what we want here. Thus, the part of todo_list_transform() that
replaces the buffer is dropped, and the function is renamed
todo_list_to_strbuf(). It is called by todo_list_write_to_file() to
fill the buffer to write to the disk.
todo_list_write_to_file() can also take care of appending the help text
to the buffer before writing it to the disk, or to write only the first
n items of the list. This feature will be used by
skip_unnecessary_picks(), which has to write done commands in a file.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors transform_todos() to work on a todo_list. The function
is renamed todo_list_transform().
As rebase -p still need to check the todo list from the disk, a new
function is introduced, transform_todo_file(). It is still used by
complete_action() and edit_todo_list() for now, but they will be
replaced in a future commit.
todo_list_transform() is not a static function, because it will be used
by edit_todo_list() from rebase-interactive.c in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'arg' field of todo_item used to store the address of the first byte
of the parameter of a command in a todo list. It was associated with
the length of the parameter (the 'arg_len' field).
This replaces the 'arg' field by 'arg_offset'. This new field does not
store the address of the parameter, but the position of the first
character of the parameter in the buffer. todo_item_get_arg() is added
to return the address of the parameter of an item.
This will prevent todo_list_add_exec_commands() from having to do awful
pointer arithmetics when growing the todo list buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick -m1" was forbidden when picking a non-merge
commit, even though there _is_ parent number 1 for such a commit.
This was done to avoid mistakes back when "cherry-pick" was about
picking a single commit, but is no longer useful with "cherry-pick"
that can pick a range of commits. Now the "-m$num" option is
allowed when picking any commit, as long as $num names an existing
parent of the commit.
Technically this is a backward incompatible change; hopefully
nobody is relying on the error-checking behaviour.
* so/cherry-pick-always-allow-m1:
t3506: validate '-m 1 -ff' is now accepted for non-merge commits
t3502: validate '-m 1' argument is now accepted for non-merge commits
cherry-pick: do not error on non-merge commits when '-m 1' is specified
t3510: stop using '-m 1' to force failure mid-sequence of cherry-picks
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hold_locked_index() assumes the index path at $GIT_DIR/index. This is
not good for places that take an arbitrary index_state instead of
the_index, which is basically everywhere except builtin/.
Replace it with repo_hold_locked_index(). hold_locked_index() remains
as a wrapper around repo_hold_locked_index() to reduce changes in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the structures todo_list and todo_item, and the functions
todo_list_release() and parse_insn_buffer(), accessible outside of
sequencer.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This clears the number of items of a todo_list before parsing it to
allow to parse the same list multiple times without issues. As its
items are not dynamically allocated, or don’t need to allocate memory,
no additionnal memory management is required here.
Furthermore, if a line is invalid, the type of the corresponding
command is set to a garbage value, and its argument is defined properly.
This will allow to recreate the text of a todo list from its commands,
even if one of them is incorrect.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'quiet' and 'interactive' may sound like antonyms, the interactive
machinery actually has logic that implements several
interactive_rebase=implied cases (--exec, --keep-empty, --rebase-merges)
which won't pop up an editor. The rewrite of interactive rebase in C
added a quiet option, though it only turns stats off. Since we want to
make the interactive machinery also take over for git-rebase--merge, it
should fully implement the --quiet option.
git-rebase--interactive was already somewhat quieter than
git-rebase--merge and git-rebase--am, possibly because cherry-pick has
just traditionally been quieter. As such, we only drop a few
informational messages -- "Rebasing (n/m)" and "Successfully rebased..."
Also, for simplicity, remove the differences in how quiet and verbose
options were recorded. Having one be signalled by the presence of a
"verbose" file in the state_dir, while the other was signalled by the
contents of a "quiet" file was just weirdly inconsistent. (This
inconsistency pre-dated the rewrite into C.) Make them consistent by
having them both key off the presence of the file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking multiple commits, it's impossible to have both
merge- and non-merge commits on the same command-line. Not specifying
'-m 1' results in cherry-pick refusing to handle merge commits, while
specifying '-m 1' fails on non-merge commits.
This patch allows '-m 1' for non-merge commits. As mainline is always
the only parent for a non-merge commit, it makes little sense to
disable it.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common use case for the `--exec` option is to verify that each commit
in a topic branch compiles cleanly, via `git rebase -x make <base>`.
However, when an `exec` in such a rebase fails, it is not re-scheduled,
which in this instance is not particularly helpful.
Let's offer a flag to reschedule failed `exec` commands.
Based on an idea by Paul Morelle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
The helper function to refresh the cached stat information in the
in-core index has learned to perform the lstat() part of the
operation in parallel on multi-core platforms.
* bp/refresh-index-using-preload:
refresh_index: remove unnecessary calls to preload_index()
speed up refresh_index() by utilizing preload_index()
Unify code to read the author-script used in "git am" and the
commands that use the sequencer machinery, e.g. "git rebase -i".
* pw/am-rebase-read-author-script:
sequencer: use read_author_script()
add read_author_script() to libgit
am: rename read_author_script()
am: improve author-script error reporting
am: don't die in read_author_script()
Every once in a while, the interactive rebase makes sure that no stale
files are lying around. These days, we need to include MERGE_HEAD into
that set of files, as the `merge` command will generate them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect that a `merge` can be skipped because the merged commit
is already an ancestor of HEAD, we do not need to commit, therefore
writing the MERGE_HEAD file is useless.
It is actually worse than useless: a subsequent `git commit` will pick
it up and think that we want to merge that commit, still.
To avoid that, move the code that writes the MERGE_HEAD file to a
location where we already know that the `merge` cannot be skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the_hash_algo stays, even if we can easily replace it with
repo->hash_algo. My reason is I still believe tying hash_algo to a
struct repository is a wrong move. But if I'm wrong, we can always go
for another round of conversion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to pass 'struct repository *' around most of the
time instead of 'struct index_state *' because most sequencer.c
operations need more than just the index, the_repository is replaced
as well in the functions that now take 'struct repository
*'. the_repository is still present in this file, but total clean up
will be done later. It's not the main focus of this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With refresh_index() learning to utilize preload_index() to speed up its
operation there is no longer any benefit to having the caller preload the
index first. Remove those unneeded calls by calling read_index() instead of
the preload variant.
There is no measurable performance impact of this patch - the 2nd call to
preload_index() bails out quickly but there is no reason to call it twice.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" learned to take 'b' as the short form of 'break'
option in the todo list.
* js/rebase-i-shortopt:
rebase -i: recognize short commands without arguments
"git rebase -i" learned a new insn, 'break', that the user can
insert in the to-do list. Upon hitting it, the command returns
control back to the user.
* js/rebase-i-break:
rebase -i: introduce the 'break' command
rebase -i: clarify what happens on a failed `exec`
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Use the new function added in the last commit to read the author
script, updating read_env_script() and read_author_ident(). We now
have a single code path that reads the author script for am and all
flavors of rebase. This changes the behavior of read_env_script() as
previously it would set any environment variables that were in the
author-script file. Now it is an error if the file contains other
variables or any of GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and
GIT_AUTHOR_DATE are missing. This is what am and the non interactive
version of rebase have been doing for several years so hopefully it
will not cause a problem for interactive rebase users. The advantage
is that we are reusing existing code from am which uses sq_dequote()
to properly dequote variables. This fixes potential problems with user
edited scripts as read_env_script() which did not track quotes
properly.
This commit also removes the fallback code for checking for a broken
author script after git is upgraded when a rebase is stopped. Now that
the parsing uses sq_dequote() it will reliably return an error if the
quoting is broken and the user will have to abort the rebase and
restart. This isn't ideal but it's a corner case and the detection of
the broken quoting could be confused by user edited author scripts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add read_author_script() to sequencer.c based on the implementation in
builtin/am.c and update read_am_author_script() to use
read_author_script(). The sequencer code that reads the author script
will be updated in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It came up in review [1, 2] that this non-idiomatic loop is a bit tricky.
When we find a space, we set `len = i`, which gives us the answer we are
looking for, but which also breaks out of the loop.
It turns out that this loop can confuse compilers as well. My copy of
gcc 7.3.0 realizes that we are essentially evaluating `(len + 1) < len`
and warns that the behavior is undefined if `len` is `INT_MAX`. (Because
the assignment `len = i` is guaranteed to decrease `len`, such undefined
behavior is not actually possible.)
Rewrite the loop to a more idiomatic variant which doesn't muck with
`len` in the loop body. That should help compilers and human readers
figure out what is going on here. But do note that we need to update
`len` since it is not only used just after this loop (where we could
have used `i` directly), but also later in this function.
While at it, reduce the scope of `i`.
[1] https://public-inbox.org/git/CAPig+cQbG2s-LrAo9+7C7=dXifbWFJ3SzuNa-QePHDk7egK=jg@mail.gmail.com/
[2] https://public-inbox.org/git/CAPig+cRjU6niXpT2FrDWZ0x1HmGf1ojVZj3uk2qXEGe-S7i_HQ@mail.gmail.com/
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
as shown by:
sequencer.c: In function ‘write_basic_state’:
sequencer.c:2392:37: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_verbose(), "");
where write_file will create an empty file if told to write an empty string
as can be inferred by the previous call
the somehow more convoluted syntax works around the issue by providing a non
empty format string and is already being used for the abort safety file since
1e41229d96 ("sequencer: make sequencer abort safer", 2016-12-07)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer instruction 'b', short for 'break', is rejected:
error: invalid line 2: b
The reason is that the parser expects all short commands to have
an argument. Permit short commands without arguments.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" learns to show progress bar when refreshing the index
takes a long time.
* nd/status-refresh-progress:
status: show progress bar if refreshing the index takes too long
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
The 'edit' command can be used to cherry-pick a commit and then
immediately drop out of the interactive rebase, with exit code 0, to let
the user amend the commit, or test it, or look around.
Sometimes this functionality would come in handy *without*
cherry-picking a commit, e.g. to interrupt the interactive rebase even
before cherry-picking a commit, or immediately after an 'exec' or a
'merge'.
This commit introduces that functionality, as the spanking new 'break'
command.
Suggested-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
oidset_insert() returns 1 if the object ID is already in the set and
doesn't add it again, or 0 if it hadn't been present. Make use of that
fact instead of checking with an extra oidset_contains() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
"git rebase -i" did not clear the state files correctly when a run
of "squash/fixup" is aborted and then the user manually amended the
commit instead, which has been corrected.
* js/rebase-i-autosquash-fix:
rebase -i: be careful to wrap up fixup/squash chains
rebase -i --autosquash: demonstrate a problem skipping the last squash
The reason rerere(), rerere_forget() and rerere_remaining() take a
struct repository instead of struct index_state is not obvious from
the patch:
Deep in update_paths() and find_conflict(), hold_locked_index() and
read_index() are called. These functions assumes the index path at
$GIT_DIR/index which is not always true when you take an arbitrary
index state. Taking a repository will allow us to point to the right
index path later when we replace them with repo_ versions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
Refreshing the index is usually very fast, but it can still take a
long time sometimes. Cold cache is one. Or copying a repo to a new
place (*). It's good to show something to let the user know "git
status" is not hanging, it's just busy doing something.
(*) In this case, all stat info in the index becomes invalid and git
falls back to rehashing all file content to see if there's any
difference between updating stat info in the index. This is quite
expensive. Even with a repo as small as git.git, it takes 3
seconds.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit b00bf1c9a8 ("git-rebase: make --allow-empty-message the
default", 2018-06-27), several arguments were given for transplanting
empty commits without halting and asking the user for confirmation on
each commit. These arguments were incomplete because the logic clearly
assumed the only cases under consideration were transplanting of commits
with empty messages (see the comment about "There are two sources for
commits with empty messages). It didn't discuss or even consider
rewords, squashes, etc. where the user is explicitly asked for a new
commit message and provides an empty one. (My bad, I totally should
have thought about that at the time, but just didn't.)
Rewords and squashes are significantly different, though, as described
by SZEDER:
Let's suppose you start an interactive rebase, choose a commit to
squash, save the instruction sheet, rebase fires up your editor, and
then you notice that you mistakenly chose the wrong commit to
squash. What do you do, how do you abort?
Before [that commit] you could clear the commit message, exit the
editor, and then rebase would say "Aborting commit due to empty
commit message.", and you get to run 'git rebase --abort', and start
over.
But [since that commit, ...] saving the commit message as is would
let rebase continue and create a bunch of unnecessary objects, and
then you would have to use the reflog to return to the pre-rebase
state.
Also, he states:
The instructions in the commit message template, which is shown for
'reword' and 'squash', too, still say...
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
These are sound arguments that when editing commit messages during a
sequencer operation, that if the commit message is empty then the
operation should halt and ask the user to correct. The arguments in
commit b00bf1c9a8 (referenced above) still apply when transplanting
previously created commits with empty commit messages, so the sequencer
should not halt for those.
Furthermore, all rationale so far applies equally for cherry-pick as for
rebase. Therefore, make the code default to --allow-empty-message when
transplanting an existing commit, and to default to halting when the
user is asked to edit a commit message and provides an empty one -- for
both rebase and cherry-pick.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
When an interactive rebase was stopped at the end of a fixup/squash
chain, the user might have edited the commit manually before continuing
(with either `git rebase --skip` or `git rebase --continue`, it does not
really matter which).
We need to be very careful to wrap up the fixup/squash chain also in
this scenario: otherwise the next fixup/squash chain would try to pick
up where the previous one was left.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
