This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function strip_path_suffix() will try to strip a given suffix from
a given path. The suffix must start at a directory boundary (i.e. "core"
is not a path suffix of "libexec/git-core", but "git-core" is).
Arbitrary runs of directory separators ("slashes") are assumed identical.
Example:
strip_path_suffix("C:\\msysgit/\\libexec\\git-core",
"libexec///git-core", &prefix)
will set prefix to "C:\\msysgit" and return 0.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
This function is now superseded by normalize_path_copy().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the test-path-utils utility to invoke normalize_path_copy()
instead of normalize_absolute_path() because the latter is about to be
removed.
The test cases in t0060 are adjusted in two regards:
- normalize_path_copy() more often leaves a trailing slash in the result.
This has no negative side effects because the new user of this function,
longest_ancester_length(), already accounts for this behavior.
- The function can fail.
The tests uncover a flaw in normalize_path_copy(): If there are
sufficiently many '..' path components so that the root is reached, such as
in "/d1/s1/../../d2", then the leading slash was lost. This manifested
itself that (assuming there is a repository at /tmp/foo)
$ git add /d1/../tmp/foo/some-file
reported 'pathspec is outside repository'. This is now fixed.
Moreover, the test case descriptions of t0060 now include the test data and
expected outcome.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using git with GIT_CEILING_DIRECTORIES crashed on Windows due to a failed
assertion in normalize_absolute_path(): This function expects absolute
paths to start with a slash, while on Windows they can start with a drive
letter or a backslash.
This fixes it by using the alternative, normalize_path_copy() instead,
which can handle Windows-style paths just fine.
Secondly, the portability macro PATH_SEP is used instead of expecting
colons to be used as path list delimiter.
The test script t1504 is also changed to help MSYS's bash recognize some
program arguments as path list. (MSYS's bash must translate POSIX-style
path lists to Windows-style path lists, and the heuristic did not catch
some cases.)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function and normalize_absolute_path() do almost the same thing. The
former already works on Windows, but the latter crashes.
In subsequent changes we will remove normalize_absolute_path(). Here we
make the replacement function reusable. On the way we rename it to reflect
that it does some path normalization. Apart from that this is only moving
around code.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are trying to determine whether a directory contains
a git repository, one of the tests we do is to check whether
HEAD is either a symlink or a symref into the "refs/"
hierarchy, or a detached HEAD.
We can tighten this a little more, though: a non-detached
HEAD should always point to a branch (since checking out
anything else should result in detachment), so it is safe to
check for "refs/heads/".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/maint-mksnpath:
Use git_pathdup instead of xstrdup(git_path(...))
git_pathdup: returns xstrdup-ed copy of the formatted path
Fix potentially dangerous use of git_path in ref.c
Add git_snpath: a .git path formatting routine with output buffer
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Conflicts:
builtin-revert.c
rerere.c
The comments for normalize_absolute_path explicitly claim
that the source and destination buffers may be the same
(though they may not otherwise overlap). Thus the call to
memcpy may involve copying overlapping data, and memmove
should be used instead.
This fixes a valgrind error in t1504.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function's purpose is to replace git_path where the buffer of
formatted path may not be reused by subsequent calls of the function
or will be copied anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just vsnprintf's but additionally calls cleanup_path() on the
result. To be used as alternatives to mkpath() where the buffer for the
created path may not be reused by subsequent calls of the same formatting
function.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function had used make_absolute_path(); but this function dies if
the directory that contains the entry whose relative path was supplied in
the argument does not exist. This is a problem if the argument is, for
example, "../libexec/git-core", and that "../libexec" does not exist.
Since the resolution of symbolic links is not required for elements in
PATH, we can fall back to using make_nonrelative_path(), which simply
prepends $PWD to the path.
We have to move make_nonrelative_path() alongside make_absolute_path() in
abspath.c so that git-shell can be linked. See 5b8e6f85f.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.6.3
git-am: Do not exit silently if committer is unset
t0004: fix timing bug
git-mailinfo: document the -n option
Fix backwards-incompatible handling of core.sharedRepository
06cbe85 (Make core.sharedRepository more generic, 2008-04-16) broke the
traditional setting of core.sharedRepository to true, which was to make
the repository group writable: with umask 022, it would clear the
permission bits for 'other'. (umask 002 did not exhibit this behaviour
since pre-chmod() check in adjust_shared_perm() fails in that case.)
The call to adjust_shared_perm() should only loosen the permission.
If the user has umask like 022 or 002 that allow others to read, the
resulting files should be made readable and writable by group, without
restricting the readability by others.
This patch fixes the adjust_shared_perm() mode tweak based on Junio's
suggestion and adds the appropriate tests to t/t1301-shared-repo.sh.
Cc: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
A lot of modules that have nothing to do with git-shell functionality
were linked in, bloating git-shell more than 8 times.
This patch cuts off redundant dependencies by:
1. providing stubs for three functions that make no sense for git-shell;
2. moving quote_path_fully from environment.c to quote.c to make the
later self sufficient;
3. moving make_absolute_path into a new separate file.
The following numbers have been received with the default optimization
settings on master using GCC 4.1.2:
Before:
text data bss dec hex filename
143915 1348 93168 238431 3a35f git-shell
After:
text data bss dec hex filename
17670 788 8232 26690 6842 git-shell
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once we find the absolute paths for git_dir and work_tree, we can make
git_dir a relative path since we know pwd will be work_tree. This should
save the kernel some time traversing the path to work_tree all the time
if git_dir is inside work_tree.
Daniel's patch didn't apply for me as-is, so I recreated it with some
differences, and here are the numbers from ten runs each.
There is some IO for me - probably due to more-or-less random flushing of
the journal - so the variation is bigger than I'd like, but whatever:
Before:
real 0m8.135s
real 0m7.933s
real 0m8.080s
real 0m7.954s
real 0m7.949s
real 0m8.112s
real 0m7.934s
real 0m8.059s
real 0m7.979s
real 0m8.038s
After:
real 0m7.685s
real 0m7.968s
real 0m7.703s
real 0m7.850s
real 0m7.995s
real 0m7.817s
real 0m7.963s
real 0m7.955s
real 0m7.848s
real 0m7.969s
Now, going by "best of ten" (on the assumption that the longer numbers
are all due to IO), I'm saying a 7.933s -> 7.685s reduction, and it does
seem to be outside of the noise (ie the "after" case never broke 8s, while
the "before" case did so half the time).
So looks like about 3% to me.
Doing it for a slightly smaller test-case (just the "arch" subdirectory)
gets more stable numbers probably due to not filling the journal with
metadata updates, so we have:
Before:
real 0m1.633s
real 0m1.633s
real 0m1.633s
real 0m1.632s
real 0m1.632s
real 0m1.630s
real 0m1.634s
real 0m1.631s
real 0m1.632s
real 0m1.632s
After:
real 0m1.610s
real 0m1.609s
real 0m1.610s
real 0m1.608s
real 0m1.607s
real 0m1.610s
real 0m1.609s
real 0m1.611s
real 0m1.608s
real 0m1.611s
where I'ld just take the averages and say 1.632 vs 1.610, which is just
over 1% peformance improvement.
So it's not in the noise, but it's not as big as I initially thought and
measured.
(That said, it obviously depends on how deep the working directory path is
too, and whether it is behind NFS or something else that might need to
cause more work to look up).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Particularly for the "alternates" file, if one will be created, we
want a path that doesn't depend on the current directory, but we want
to retain any symlinks in the path as given and any in the user's view
of the current directory when the path was given.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git recognize a new environment variable that prevents it from
chdir'ing up into specified directories when looking for a GIT_DIR.
Useful for avoiding slow network directories.
For example, I use git in an environment where homedirs are automounted
and "ls /home/nonexistent" takes about 9 seconds. Setting
GIT_CEILING_DIRS="/home" allows "git help -a" (for bash completion) and
"git symbolic-ref" (for my shell prompt) to run in a reasonable time.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
normalize_absolute_path removes several oddities form absolute paths,
giving nice clean paths like "/dir/sub1/sub2". Also add a test case
for this utility, based on a new test program (in the style of test-sha1).
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xread() and xwrite() return ssize_t values as their native POSIX
counterparts read(2) and write(2).
To be consistent, read_in_full() and write_in_full() should also return
ssize_t values.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".
"git config core.sharedRepository 0xxx" is also handled.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not allow changing the bit to a non-root user.
This fixes t1301-shared-repo.sh on the platform.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing "xyz" to make_absolute_path(), make_absolute_path()
erroneously tried to chdir("xyz"), and then append "/xyz". Instead,
skip the chdir() completely when no slash was found.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds convenience functions to work with absolute paths.
The function is_absolute_path() should help the efforts to integrate
the MinGW fork.
Note that make_absolute_path() returns a pointer to a static buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user's TMPDIR is insanely long, return negative after
setting errno to ENAMETOOLONG, pretending that the underlying
mkstemp() choked on a temporary file path that is too long.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were places using "GIT_DIR" instead of GIT_DIR_ENVIRONMENT and
"GIT_CONFIG" instead of CONFIG_ENVIRONMENT. This makes it easier to
find all places touching an environment variable using git grep or
similar tools.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We shouldn't attempt to assign constant strings into char*, as the
string is not writable at runtime. Likewise we should always be
treating unsigned values as unsigned values, not as signed values.
Most of these are very straightforward. The only exception is the
(unnecessary) xstrdup/free in builtin-branch.c for the detached
head case. Since this is a user-level interactive type program
and that particular code path is executed no more than once, I feel
that the extra xstrdup call is well worth the easy elimination of
this warning.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/detached-head:
git-checkout: handle local changes sanely when detaching HEAD
git-checkout: safety check for detached HEAD checks existing refs
git-checkout: fix branch name output from the command
git-checkout: safety when coming back from the detached HEAD state.
git-checkout: rewording comments regarding detached HEAD.
git-checkout: do not warn detaching HEAD when it is already detached.
Detached HEAD (experimental)
git-branch: show detached HEAD
git-status: show detached HEAD
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows "git checkout v1.4.3" to dissociate the HEAD of
repository from any branch. After this point, "git branch"
starts reporting that you are not on any branch. You can go
back to an existing branch by saying "git checkout master", for
example.
This is still experimental. While I think it makes sense to
allow commits on top of detached HEAD, it is rather dangerous
unless you are careful in the current form. Next "git checkout
master" will obviously lose what you have done, so we might want
to require "git checkout -f" out of a detached HEAD if we find
that the HEAD commit is not an ancestor of any other branches.
There is no such safety valve implemented right now.
On the other hand, the reason the user did not start the ad-hoc
work on a new branch with "git checkout -b" was probably because
the work was of a throw-away nature, so the convenience of not
having that safety valve might be even better. The user, after
accumulating some commits on top of a detached HEAD, can always
create a new branch with "git checkout -b" not to lose useful
work done while the HEAD was detached.
We'll see.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
When widening permission for files and directories in a 'shared'
repository for a user with inappropriate umask() setting for
shared work, make sure we call chmod() only when we actually
need to.
The primary idea owes credit to Johannes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to maintain a few filesystem pathnames concurrently, by
simply replacing the single static "pathname" buffer with a LRU of four
buffers.
We did exactly the same thing with sha1_to_hex(), for pretty much exactly
the same reason. Sometimes you want to use two pathnames, and while it's
easy enough to xstrdup() them, why not just do the LU buffer thing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This enhances core.sharedrepository to have additionally
specify that read and exec permissions to be given to others as
well. It is useful when serving a repository via gitweb and
git-daemon that runs as a user outside the project group.
The configuration item can take the following values:
[core]
sharedrepository ; the same as "group"
sharedrepository = true ; ditto
sharedrepository = 1 ; ditto
sharedrepository = group ; allow rwx to group
sharedrepository = all ; allow rwx to group, allow rx to other
sharedrepository = umask ; not shared - use umask
It also extends "git init-db" to take "--shared=all" and friends
from the command line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were a few calls to adjust_shared_perm() that were
missing:
- init-db creates refs, refs/heads, and refs/tags before
reading from templates that could specify sharedrepository in
the config file;
- updating config file created it under user's umask without
adjusting;
- updating refs created it under user's umask without
adjusting;
- switching branches created .git/HEAD under user's umask
without adjusting.
This moves adjust_shared_perm() from sha1_file.c to path.c,
since a few SIMPLE_PROGRAM need to call repository configuration
functions which in turn need to call adjust_shared_perm().
sha1_file.c needs to link with SHA1 computation library which
is usually not linked to SIMPLE_PROGRAM.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The whitelist of git-daemon is checked against return value from
enter_repo(), and enter_repo() used to return the value obtained
from getcwd() to avoid directory aliasing issues as discussed
earier (mid October 2005).
Unfortunately, it did not go well as we hoped.
For example, /pub on a kernel.org public machine is a symlink to
its real mountpoint, and it is understandable that the
administrator does not want to adjust the whitelist every time
/pub needs to point at a different partition for storage
allcation or whatever reasons. Being able to keep using
/pub/scm as the whitelist is a desirable property.
So this version of enter_repo() reports what it used to chdir()
and validate, but does not use getcwd() to canonicalize the
directory name. When it sees a user relative path ~user/path,
it internally resolves it to try chdir() there, but it still
reports ~user/path (possibly after appending .git if allowed to
do so, in which case it would report ~user/path.git).
What this means is that if a whitelist wants to allow a user
relative path, it needs to say "~" (for all users) or list user
home directories like "~alice" "~bob". And no, you cannot say
/home if the advertised way to access user home directories are
~alice,~bob, etc. The whole point of this is to avoid
unnecessary aliasing issues.
Anyway, because of this, daemon needs to do a bit more work to
guard itself. Namely, it needs to make sure that the accessor
does not try to exploit its leading path match rule by inserting
/../ in the middle or hanging /.. at the end. I resurrected the
belts and suspender paranoia code HPA did for this purpose.
This check cannot be done in the enter_repo() unconditionally,
because there are valid callers of enter_repo() that want to
honor /../; authorized users coming over ssh to run send-pack
and fetch-pack should be allowed to do so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After daemon, upload-pack and receive-pack find out where the
git directory is and chdir() there, make sure that repository is
in a format we understand, after putenv("GIT_DIR=.") so that it
knows to pick up the configuration file from there.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We wanted --strict to mean "do not DWIM", but the code required to
see absolute path. daemon does its own path verification and chdirs
to the verified repository, so enter_repo() called from upload-pack
will always enter ".". Requiring absolute path does not make any sense.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make some functions static and convert func() function prototypes to to
func(void). Fix declaration after statement, missing declaration and
redundant declaration warnings.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This should force git-daemon administrator's job a bit harder
because the exact paths need to be given in the whitelist, but
at the same time makes the auditing easier.
This moves validate_symref() from refs.c to path.c, because we
need to link path.c with git-daemon for its "enter_repo()", but
we do not want to link the daemon with the rest of git libraries
and its requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch provides the work-horse of the user-relative paths feature,
using Linus' idea of a blind chdir() and getcwd() which makes it
remarkably simple.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have deprecated the old environment variable names for quite a
while and now it's time to remove them. Gone are:
SHA1_FILE_DIRECTORIES AUTHOR_DATE AUTHOR_EMAIL AUTHOR_NAME
COMMIT_AUTHOR_EMAIL COMMIT_AUTHOR_NAME SHA1_FILE_DIRECTORY
Signed-off-by: Junio C Hamano <junkio@cox.net>
Omitting the first branch in ?: is a GNU extension. Cute,
but not supported by other compilers. Replaced mostly
by explicit tests. Calls to getenv() simply are repeated
on non-GNU compilers.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
git_mkstemp() attempted to use TMPDIR environment variable, but it botched
copying the templates.
[jc: Holger, please add your own Signed-off-by line, and also if you can,
send in future patches as non attachments.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
