"git clone" did not work if a repository pointed at by the
"--reference" option is a gitfile that points at another place.
* as/clone-reference-with-gitfile:
clone: Allow repo using gitfile as a reference
clone: Fix error message for reference repository
Preparatory steps to make "git add <pathspec>" take notice of
removed paths that match <pathspec> by default in Git 2.0.
* 'jc/add-2.0-delete-default' (early part):
git add: rephrase the "removal will cease to be ignored" warning
git add: rework the logic to warn "git add <pathspec>..." default change
git add: start preparing for "git add <pathspec>..." to default to "-A"
builtin/add.c: simplify boolean variables
Make the initial "sparse" selection of the paths more sticky across
"git checkout".
* nd/checkout-keep-sparse:
checkout: add --ignore-skip-worktree-bits in sparse checkout mode
A commit object whose author or committer ident are malformed
crashed some code that trusted that a name, an email and an
timestamp can always be found in it.
* jk/chopped-ident:
blame: handle broken commit headers gracefully
pretty: handle broken commit headers gracefully
cat-file: print tags raw for "cat-file -p"
Do this by removing a couple of useless return statements. Without this
change, compilation with Sun C Compiler 5.9 (SunOS_i386 Patch 124868-15
2010/08/11) fails with the following message:
"zlib.c", line 192: void function cannot return value
"zlib.c", line 201: void function cannot return value
cc: acomp failed for zlib.c
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"--" is used to separate pathspecs from the rev specs, and not rev
specs from the options, as the shortlog_usage string currently
indicates. In correcting this usage string, make it consistent with
the log_usage string.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace '<since>..<until>' with '<revision range>', in accordance with
the documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is a remnant of an earlier log -L version, and not
currently implemented. Remove it until (if at all) it is implemented
again.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are broadly two problems with the current SYNOPSIS. First, it
completely omits the detail that paths can be specified. Second, it
attempts to list all the options: this is futile as, in addition to
the options unique to it, it accepts all the options that git-rev-list
accepts. In fixing these problems, make the SYNOPSIS consistent with
that in git-log.txt. Also add the corresponding sections to OPTIONS.
Save adding the options from rev-list-options.txt for a later patch,
as it requires some work to pick out the options that are relevant to
shortlog.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In its current form, the note talks about separating options from
"branch names" and "refnames" in the same sentence. This is entirely
inaccurate, as <revision range> need not be a set of branch names or
ref names. Rewrite it to use the word "revision range", to be
consistent with the SYNOPSIS.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'<since>..<until>' is misleading, as there are many other forms that
'git log' can accept as an argument. Replace it with <revision range>,
referring to the section "Specifying Ranges" in revisions.txt, and
rewrite the section appropriately.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section lists <since>..<until> as the first item, but this
is inconsistent with the ordering in SYNOPSIS. Move it down until it
appears just before [[--] <path>...].
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In <rev1>..<rev2> and <rev1>...<rev2>, if either <rev1> or <rev2> is
omitted, it defaults to 'HEAD'. Add this detail to the document.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the logic to decide when to warn has been tightened, we know the
user is in a situation where the current and future behaviours will
be different. Spell out what happens with these two versions and
how to explicitly ask for the behaviour, and suggest "git status" as
a way to inspect the current status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second paragraph of the added description for the -L option
"<start> and <end> can take one of these forms:", and the list of
forms that follow the headline, were indented one level too short,
due to the missing "+" to signal that the next paragraph continues
the previous one.
Also "You can specify this option more than once" is about the -L
option, not about its various forms of starting and ending points.
Move it to the end of the main text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current definition of 'revision' sounds like it is saying that a
revision is a tree object. In reality it is just a commit.
This should be especially useful for people used to other revision
control systems trying to see how familiar concepts translate into git
terms.
Reported-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ta/glossary:
glossary: improve definitions of refspec and pathspec
The name of the hash function is "SHA-1", not "SHA1"
glossary: improve description of SHA-1 related topics
glossary: remove outdated/misleading/irrelevant entries
Improve documentation to illustrate "push authenticated, fetch
anonymous" configuration for smart HTTP servers.
* jk/doc-http-backend:
doc/http-backend: match query-string in apache half-auth example
doc/http-backend: give some lighttpd config examples
doc/http-backend: clarify "half-auth" repo configuration
Reduce duplicated code between convert.c and attr.c.
* lf/read-blob-data-from-index:
convert.c: remove duplicate code
read_blob_data_from_index(): optionally return the size of blob data
attr.c: extract read_index_data() as read_blob_data_from_index()
We signal presense of untracked files by adding a per-cent sign '%'
to the prompt. But because '%' is used as an escape character to
introduce prompt customization in zsh (just like bash prompt uses
'\' to escape '\u', '\h', etc.), we need to say '%%' to get a
literal per-cent.
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of a remote-tracking branch in the glossary have been
out-of-date for a while (by e.g. referring to "Pull:" from old-style
$GIT_DIR/remotes files).
Also, the preceding patches have formalized that a remote-tracking branch
must match a configured refspec in order to be usable as an upstream.
This patch rewrites the paragraph on remote-tracking branches accordingly.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code for validating tracking branches (e.g. the argument to
the -t/--track option) hardcodes refs/heads/* and refs/remotes/* as the
potential locations for tracking branches. This works with the refspecs
created by "git clone" or "git remote add", but is suboptimal in other
cases:
- If "refs/remotes/foo/bar" exists without any association to a remote
(i.e. there is no remote named "foo", or no remote with a refspec
that matches "refs/remotes/foo/bar"), then it is impossible to set up
a valid upstream config that tracks it. Currently, the code defaults
to using "refs/remotes/foo/bar" from repo "." as the upstream, which
works, but is probably not what the user had in mind when running
"git branch baz --track foo/bar".
- If the user has tweaked the fetch refspec for a remote to put its
remote-tracking branches outside of refs/remotes/*, e.g. by running
git config remote.foo.fetch "+refs/heads/*:refs/foo_stuff/*"
then the current code will refuse to use its remote-tracking branches
as --track arguments, since they do not match refs/remotes/*.
This patch removes the "refs/remotes/*" requirement for upstream branches,
and replaces it with explicit checking of the refspecs for each remote to
determine whether a given --track argument is a valid remote-tracking
branch. This solves both of the above problems, since the matching refspec
guarantees that there is a both a remote name and a remote branch name
that can be used for the upstream config.
However, this means that refs located within refs/remotes/* without a
corresponding remote/refspec will no longer be usable as upstreams.
The few existing tests which depended on this behavioral quirk has
already been fixed in the preceding patches.
This patch fixes the last remaining test failure in t2024-checkout-dwim.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
This test uses --track against a "remotes/trunk" ref which does not belong
to any configured (git) remotes, but is instead created by "git svn fetch"
operating on an svn-remote. It does not make sense to use an svn-remote as
an upstream for a local branch, as a regular "git pull" from (or "git push"
to) it would obviously fail (instead you would need to use "git svn" to
communicate with this remote). Furthermore, the usage of --track in this
case is unnecessary, since the upstreaming config that would be created is
never used.
Simply removing --track fixes the issue without changing the expected
behavior of the test.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
Without this patch, this test would start failing when the new behavior is
introduced.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
This patch encodes the new expected behavior of this test, and marks the
test with "test_expect_failure" in anticipation of a following patch to
introduce the new behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DWIM mode of checkout allows you to run "git checkout foo" when there
is no existing local ref or path called "foo", and there is exactly _one_
remote with a remote-tracking branch called "foo". Git will automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
For example, consider the following unconventional (but perfectly valid)
remote setup:
[remote "origin"]
fetch = refs/heads/*:refs/remotes/origin/*
[remote "frotz"]
fetch = refs/heads/*:refs/remotes/frotz/nitfol/*
Case 1: Assume both "origin" and "frotz" have remote-tracking branches called
"foo", at "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo"
respectively. In this case "git checkout foo" should fail, because there is
more than one remote with a "foo" branch.
Case 2: Assume only "frotz" have a remote-tracking branch called "foo". In
this case "git checkout foo" should succeed, and create a local branch "foo"
from "refs/remotes/frotz/nitfol/foo", using remote branch "foo" from "frotz"
as its upstream.
The current code hardcodes the assumption that all remote-tracking branches
must match the "refs/remotes/$remote/*" pattern (which is true for remotes
with "conventional" refspecs, but not true for the "frotz" remote above).
When running "git checkout foo", the current code looks for exactly one ref
matching "refs/remotes/*/foo", hence in the above example, it fails to find
"refs/remotes/frotz/nitfol/foo", which causes it to fail both case #1 and #2.
The better way to handle the above example is to actually study the fetch
refspecs to deduce the candidate remote-tracking branches for "foo"; i.e.
assume "foo" is a remote branch being fetched, and then map "refs/heads/foo"
through the refspecs in order to get the corresponding remote-tracking
branches "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo".
Finally we check which of these happens to exist in the local repo, and
if there is exactly one, we have an unambiguous match for "git checkout foo",
and may proceed.
This fixes most of the failing tests introduced in the previous patch.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git checkout foo" to DWIM the creation of local "foo" from some
existing upstream "foo", we assume conventional refspecs as created by "git
clone" or "git remote add", and fail to work correctly if the current
refspecs do not follow the conventional "refs/remotes/$remote/*" pattern.
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DWIM mode of checkout allows you to run "git checkout foo" when there is
no existing local ref or path called "foo", and there is exactly one remote
with a remote-tracking branch called "foo". Git will then automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be consistent with the documentation of all the other commands,
remove (-h|--help) from the OPTIONS section.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 54 new messages came from git.pot update in
c138af5 (l10n: git.pot: v1.8.3 round 1 (54 new, 15 removed)).
While at there, fix some small issues.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Since commit a22e6f8 (receive-pack: send pack-processing
stderr over sideband, 2012-09-21), receive-pack will start
an async sideband thread to copy the stderr from our
index-pack or unpack-objects child to the client. We hand
the thread's input descriptor to unpack(), which puts it in
the "err" member of the "struct child_process".
After unpack() returns, we use finish_async() to reap the
sideband thread. The thread is only ready to die when it
gets EOF on its pipe, which is connected to the err
descriptor. So we expect all of the write ends of that pipe
to be closed as part of unpack().
Normally, this works fine. After start_command forks, it
closes the parent copy of the descriptor. Then once the
child exits (whether it was successful or not), that closes
the only remaining writer.
However, there is one code-path in unpack() that does not
handle this. Before we decide which of unpack-objects or
index-pack to use, we read the pack header ourselves to see
how many objects it contains. If there is an error here, we
exit without running either sub-command, the pipe descriptor
remains open, and we are in a deadlock, waiting for the
sideband thread to die (which is in turn waiting for us to
close the pipe).
We can fix this by making sure that unpack() always closes
the pipe before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression fix for the logic to detect die() handler triggering
itself recursively.
* jk/a-thread-only-dies-once:
run-command: use thread-aware die_is_recursing routine
usage: allow pluggable die-recursion checks
A fix to a long-standing issue in the command line parser for
revisions, which was triggered by mv/sequence-pick-error-diag topic.
* tr/copy-revisions-from-stdin:
read_revisions_from_stdin: make copies for handle_revision_arg
In Git 2.0, "git add -u" and "git add -A" without any pathspec will
update the index for all paths, including those outside the current
directory, making it more consistent with "commit -a". To help the
migration pain, a warning is issued when the differences between the
current behaviour and the upcoming behaviour matters, i.e. when the
user has local changes outside the current directory.
* 'jn/add-2.0-u-A-sans-pathspec' (early part):
add -A: only show pathless 'add -A' warning when changes exist outside cwd
add -u: only show pathless 'add -u' warning when changes exist outside cwd
add: make warn_pathless_add() a no-op after first call
add: add a blank line at the end of pathless 'add [-u|-A]' warning
add: make pathless 'add [-u|-A]' warning a file-global function
Teach "--human-readable" aka "-H" option to "git count-objects" to
show various large numbers in Ki/Mi/GiB scaled as necessary.
* ap/strbuf-humanize:
count-objects: add -H option to humanize sizes
strbuf: create strbuf_humanise_bytes() to show byte sizes
This is pretty useful in `%<(100)%s%Cred%>(20)% an' where %s does not
use up all 100 columns and %an needs more than 20 columns. By
replacing %>(20) with %>>(20), %an can steal spaces from %s.
%>> understands escape sequences, so %Cred does not stop it from
stealing spaces in %<(100).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%>(N,trunc) truncates the right part after N columns and replace the
last two letters with "..". ltrunc does the same on the left. mtrunc
cuts the middle out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either %<, %> or %>< standing before a placeholder specifies how many
columns (at least as the placeholder can exceed it) it takes. Each
differs on how spaces are padded:
%< pads on the right (aka left alignment)
%> pads on the left (aka right alignment)
%>< pads both ways equally (aka centered)
The (<N>) follows them, e.g. `%<(100)', to specify the number of
columns the next placeholder takes.
However, if '|' stands before (<N>), e.g. `%>|(100)', then the number
of columns is calculated so that it reaches the Nth column on screen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not simply convenient over %C(auto,xxx). Some placeholders
(actually only one, %d) do multi coloring and we can't emit a multiple
colors with %C(auto,xxx).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
