When a non-existent branch was specified to be rebased, the complete
usage information is printed after the error message that carries the
relevant piece of information:
$ git rebase master topci
fatal: no such branch: topci
usage: git rebase [-i] [options] [--onto <newbase>] [<upstream>] [<branch>]
or: git rebase [-i] [options] --onto <newbase> --root [<branch>]
or: git-rebase [-i] --continue | --abort | --skip
Available options are
[30 lines of usage stripped]
The error message was introduced recently by 4ac5356c (rebase: give a
better error message for bogus branch, 2011-01-27), and the result was
acceptable because the usage text was just two lines. But 45e2acf3
(rebase: define options in OPTIONS_SPEC, 2011-02-28) made things worse
because the usage text is now 35 lines.
Just drop the usage information because it does not add value to the
error message.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we abort a rebase, we return to the original value of
HEAD. Failing to write a reflog entry means we create a
gap in the reflog (which can cause "git show
HEAD@{5.minutes.ago}" to issue a warning). Plus having the
extra entry makes the reflog easier to follow for a human.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase used to have its own command line processing. Since
it used the 'git rev-parse --parseopt' functionality exposed through
git-sh-setup, it had some flexibility, like matching prefixes of long
options, that non-interactive rebase didn't. When interactive rebase's
command line processing was factored out into git-rebase.sh in cf432ca
(rebase: factor out command line option processing, 2011-02-06), this
flexibility was lost. Give back that flexibility to interactive and
non-interactive by defining its options in OPTIONS_SPEC.
Also improve the usage message to contain the --continue, --skip and
--abort sub commands.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' without arguments is currently not supported. Make it
default to 'git rebase @{upstream}'. That is also what 'git pull
[--rebase]' defaults to, so it only makes sense that 'git rebase'
defaults to the same thing.
Defaulting to @{upstream} will make it possible to run e.g. 'git
rebase -i' without arguments, which is probably a quite common use
case. It also improves the scenario where you have multiple branches
that rebase against a remote-tracking branch, where you currently have
to choose between the extra network delay of 'git pull' or the
slightly awkward keys to enter 'git rebase @{u}'.
The error reporting when no upstream is configured for the current
branch or when no branch is checked out is reused from git-pull.sh. A
function is extracted into git-parse-remote.sh for this purpose.
Helped-by: Yann Dirson <ydirson@altern.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If '--[no-]allow_rerere_autoupdate' is passed when 'git rebase -m' is
called and a merge conflict occurs, the flag will be forgotten for the
rest of the rebase process. Make rebase remember it by saving the
value.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase is resumed, interactive rebase remembers any merge
strategy passed when the rebase was initated. Make non-interactive
rebase remember any merge strategy as well. Also make non-interactive
rebase remember any merge strategy options.
To be able to resume a rebase that was initiated with an older version
of git (older than this commit), make sure not to expect the saved
option files to exist.
Test case idea taken from Junio's 71fc224 (t3402: test "rebase
-s<strategy> -X<opt>", 2010-11-11).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, only interactive rebase remembers the value of the '-v'
flag from the initial invocation. Make non-interactive rebase also
remember it.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for writing the state to rebase-apply/ or
rebase-merge/ when a rebase is initiated. This will make it easier to
later make both interactive and non-interactive rebase remember the
options used.
Note that non-interactive rebase stores the sha1 of the original head
in a file called orig-head, while interactive rebase stores it in a
file called head. Change this by writing to orig-head in both
cases. When reading, try to read from orig-head. If that fails, read
from head instead. This protects users who upgraded git while they had
an ongoing interactive rebase, while still making it possible to
remove the code that reads from head at some point in the future.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the common parts of the handling of the sub commands
'--continue', '--skip' and '--abort'. The '--abort' handling can
handled completely in git-rebase.sh.
After this refactoring, the calls to git-rebase--am.sh,
git-rebase--merge.sh and git-rebase--interactive.sh will be better
aligned. There will only be one call to interactive rebase that will
shortcut the very last part of git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible to later remove the handling of --abort from
git-rebase--interactive.sh, align the implementation in git-rebase.sh
with the former by making it a bit more verbose.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for am-based rebase to git-rebase--am.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for merge-based rebase to git-rebase--merge.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variables $branch and $orig_head were used as synonyms. To avoid
confusion, remove $branch. The name 'orig_head' seems more suitable,
since that is the name used when the variable is persisted.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move up the code that displays the diffstat if '--stat' is passed, so
that it will be executed before calling git-rebase--interactive.sh.
A side effect is that the diffstat is now displayed before "First,
rewinding head to replay your work on top of it...".
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the call to the pre-rebase hook from
git-rebase--interactive.sh and rely on the call in
git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the check for clean work tree from git-rebase--interactive.sh and
rely on the check in git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the parsing and validation of references (onto, upstream, branch)
from git-rebase--interactive.sh and rely on the information exported from
git-rebase.sh.
By using the parsing of the --onto parameter in git-rebase.sh, this
improves the error message when the parameter is invalid.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder validation steps in preparation for the validation to be factored
out from git-rebase--interactive.sh into git-rebase.sh.
The main functional difference is that the pre-rebase hook will no longer
be run if the work tree is dirty.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the command line processing in git-rebase--interactive.sh
to git-rebase.sh. Store the options in variables in git-rebase.sh and
then source git-rebase--interactive.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure to interpret variables with the same name in the same way in
git-rebase.sh and git-rebase--interactive.sh. This will make it easier
to factor out code from git-rebase.sh to git-rebase--interactive and
export the variables.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase--interactive.sh will soon be sourced from
git-rebase.sh. Align the names of variables used in these scripts to
prepare for that.
Some names in git-rebase--interactive.sh, such as "author_script" and
"amend", are currently used in their upper case form to refer to a
file and in their lower case form to refer to something else. In these
cases, change the name of the existing lower case variable and
downcase the name of the variable that refers to the file.
Currently, git-rebase.sh uses mostly lower case variable names, while
git-rebase--interactive.sh uses mostly upper case variable names. For
consistency, downcase all variables, not just the ones that will be
shared between the two script files.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sub commands '--continue', '--skip' or '--abort' may only be used
standalone according to the documentation. Other options following the
sub command are currently not accepted, but options preceeding them
are. For example, 'git rebase --continue -v' is not accepted, while
'git rebase -v --continue' is. Tighten up the check and allow no other
options when one of these sub commands are used.
Only check that it is standalone for non-interactive rebase for
now. Once the command line processing for interactive rebase has been
replaced by the command line processing in git-rebase.sh, this check
will also apply to interactive rebase.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To later be able to use the command line processing in git-rebase.sh
for both interactive and non-interactive rebases, move anything that
is specific to non-interactive rebase outside of the parsing
loop. Keep only parsing and validation of command line options in the
loop.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect early on if a rebase is in progress and what type of rebase it
is (interactive, merge-based or am-based). This prepares for further
refactoring where am-based rebase will be dispatched to
git-rebase--am.sh and merge-based rebase will be dispatched to
git-rebase--merge.sh.
The idea is to use the same variables whether the type of rebase was
detected from rebase-apply/ or rebase-merge/ directories or from the
command line options. This will make the code more readable and will
later also make it easier to dispatch to the type-specific scripts.
Also show a consistent error message independent of the type of rebase
that was in progress and remove the obsolete wording about being in
the middle of a 'patch application', since that (an existing
"$GIT_DIR"/rebase-apply/applying) aborts 'git rebase' at an earlier
stage.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The state stored in $GIT_DIR/rebase-merge/prev_head was introduced in
58634db (rebase: Allow merge strategies to be used when rebasing,
2006-06-21), but it was never used and should therefore be removed.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'onto_name' state used in 'git rebase --merge' is currently read
once for each commit that need to be applied. It doesn't change
between each iteration, however, so it should be moved out of the
loop. This also makes the code more readable. Also remove the unused
variable 'end'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code reading the state saved in $merge_dir or $rebase_dir is
currently spread out in many places, making it harder to read and to
introduce additional state. Extract this code into one method that
reads the state. Only extract the code associated with the state that
is written when the rebase is initiated. Leave the state that changes
for each commmit, at least for now.
Currently, when resuming a merge-based rebase using --continue or
--skip, move_to_original_branch (via finish_rb_merge) will be called
without head_name and orig_head set. These variables are then lazily
read in move_to_original_branch if head_name is not set (together with
onto, which is unnecessarily read again). Change this by always
eagerly reading the state, for both am-based and merge-based rebase,
in the --continue and --skip cases. Note that this does not change the
behavior for am-based rebase, which read the state eagerly even before
this commit.
Reading the state eagerly means that part of the state will sometimes
be read unnecessarily. One example is when the rebase is continued,
but stops again at another merge conflict. Another example is when the
rebase is aborted. However, since both of these cases involve user
interaction, the delay is hopefully not noticeable. The
call_merge/continue_merge loop is not affected.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the old variable name 'dotest' for
"$GIT_DIR"/rebase-merge and no variable for "$GIT_DIR"/rebase-apply,
introduce two variables 'merge_dir' and 'apply_dir' for these paths.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
When you give a non-existent branch to git-rebase, it spits
out the usage. This can be confusing, since you may
understand the usage just fine, but simply have made a
mistake in the branch name.
Before:
$ git rebase origin bogus
Usage: git rebase ...
After:
$ git rebase origin bogus
fatal: no such branch: bogus
Usage: git rebase ...
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:
1. If a file with that pathname exists, rebase will
refresh the file from the index and then rebase the
current branch instead of producing an error.
2. If no such file exists, the error message using an
explicit "--" is better:
# before
$ git rebase -i origin bogus
error: pathspec 'bogus' did not match any file(s) known to git.
Could not checkout bogus
# after
$ git rebase -i origin bogus
fatal: invalid reference: bogus
Could not checkout bogus
The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase.stat is set to true, a diffstat should be displayed. If it is
not set, it should default to false. However, if it is explicitly set to
false (or other value), a diffstat is still displayed, which is probably
not what most users would expect. Show diffstat only if it is set
to true.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a non-interactive rebase of a ref fails at commit X and is aborted by
the user, the ref will be updated twice. First to point at X (with the
reflog message "rebase finished: $head_name onto $onto"), and then back
to $orig_head. It should not be updated at all.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase allows the '--verify' option to be passed, but it will
be ignored. Implement proper support for the option for both interactive
and non-interactive rebase by making it override any previous
'--no-verify'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any strategy options are passed to -X, the strategy will always be
set to 'recursive'. According to the documentation, it should default to
'recursive' if it is not set, but it should be possible to set it to
other values.
This fixes a regression introduced in v1.7.3-rc0~67^2 (2010-07-29).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com>
Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the case of "diff.noprefix" in git-config, git-format-patch should
still output diff with standard prefixes for git-am
Signed-off-by: Oded Shimon <ods15@ods15.dyndns.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
