Code clean-up (and a bugfix which has been merged for 2.0).
* jk/external-diff-use-argv-array:
run_external_diff: refactor cmdline setup logic
run_external_diff: hoist common bits out of conditional
run_external_diff: drop fflush(NULL)
run_external_diff: clean up error handling
run_external_diff: use an argv_array for the environment
Instead of running N pair-wise diff-trees when inspecting a
N-parent merge, find the set of paths that were touched by walking
N+1 trees in parallel. These set of paths can then be turned into
N pair-wise diff-tree results to be processed through rename
detections and such. And N=2 case nicely degenerates to the usual
2-way diff-tree, which is very nice.
* ks/tree-diff-nway:
mingw: activate alloca
combine-diff: speed it up, by using multiparent diff tree-walker directly
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well
Portable alloca for Git
tree-diff: reuse base str(buf) memory on sub-tree recursion
tree-diff: no need to call "full" diff_tree_sha1 from show_path()
tree-diff: rework diff_tree interface to be sha1 based
tree-diff: diff_tree() should now be static
tree-diff: remove special-case diff-emitting code for empty-tree cases
tree-diff: simplify tree_entry_pathcmp
tree-diff: show_path prototype is not needed anymore
tree-diff: rename compare_tree_entry -> tree_entry_pathcmp
tree-diff: move all action-taking code out of compare_tree_entry()
tree-diff: don't assume compare_tree_entry() returns -1,0,1
tree-diff: consolidate code for emitting diffs and recursion in one place
tree-diff: show_tree() is not needed
tree-diff: no need to pass match to skip_uninteresting()
tree-diff: no need to manually verify that there is no mode change for a path
combine-diff: move changed-paths scanning logic into its own function
combine-diff: move show_log_first logic/action out of paths scanning
Crash fix for codepath that miscounted the necessary size for an
array when spawning an external diff program.
* 'jk/external-diff-use-argv-array' (early part):
run_external_diff: use an argv_array for the command line
The current logic makes it hard to see what gets put onto
the command line in which cases. Pulling out a helper
function lets us see that we have two sets of file data, and
the second set either uses the original name, or the "other"
renamed/copy name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whether we have diff_filespecs to give to the diff command
or not, we always are going to run the program and pass it
the pathname. Let's pull that duplicated part out of the
conditional to make it more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fflush was added in d5535ec (Use run_command() to spawn
external diff programs instead of fork/exec., 2007-10-19),
because flushing buffers before forking is a good habit.
But later, 7d0b18a (Add output flushing before fork(),
2008-08-04) added it to the generic run-command interface,
meaning that our flush here is redundant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the external diff reports an error, we try to clean up
and die. However, we can make this process a bit simpler:
1. We do not need to bother freeing memory, since we are
about to exit. Nor do we need to clean up our
tempfiles, since the atexit() handler will do it for
us. So we can die as soon as we see the error.
3. We can just call die() rather than fprintf/exit. This
does technically change our exit code, but the exit
code of "1" is not meaningful here. In fact, it is
probably wrong, since "1" from diff usually means
"completed successfully, but there were differences".
And while we're there, we can mark the error message for
translation, and drop the full stop at the end to make it
more like our other messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use static buffers and a static array for
formatting the environment passed to the external diff.
There's nothing wrong in the code, but it is much easier to
verify that it is correct if we use a dynamic argv_array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently generate the command-line for the external
command using a fixed-length array of size 10. But if there
is a rename, we actually need 11 elements (10 items, plus a
NULL), and end up writing a random NULL onto the stack.
Rather than bump the limit, let's just use an argv_array, which
makes this sort of error impossible.
Noticed-by: Max L <infthi.inbox@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we do not translate diffstat any more, remove the obsolete comments.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
As was recently shown in "combine-diff: optimize
combine_diff_path sets intersection", combine-diff runs very slowly. In
that commit we optimized paths sets intersection, but that accounted
only for ~ 25% of the slowness, and as my tracing showed, for linux.git
v3.10..v3.11, for merges a lot of time is spent computing
diff(commit,commit^2) just to only then intersect that huge diff to
almost small set of files from diff(commit,commit^1).
In previous commit, we described the problem in more details, and
reworked the diff tree-walker to be general one - i.e. to work in
multiple parent case too. Now is the time to take advantage of it for
finding paths for combine diff.
The implementation is straightforward - if we know, we can get generated
diff paths directly, and at present that means no diff filtering or
rename/copy detection was requested(*), we can call multiparent tree-walker
directly and get ready paths.
(*) because e.g. at present, all diffcore transformations work on
diff_filepair queues, but in the future, that limitation can be
lifted, if filters would operate directly on combine_diff_paths.
Timings for `git log --raw --no-abbrev --no-renames` without `-c` ("git log")
and with `-c` ("git log -c") and with `-c --merges` ("git log -c --merges")
before and after the patch are as follows:
linux.git v3.10..v3.11
log log -c log -c --merges
before 1.9s 16.4s 15.2s
after 1.9s 2.4s 1.1s
The result stayed the same.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously diff_tree(), which is now named ll_diff_tree_sha1(), was
generating diff_filepair(s) for two trees t1 and t2, and that was
usually used for a commit as t1=HEAD~, and t2=HEAD - i.e. to see changes
a commit introduces.
In Git, however, we have fundamentally built flexibility in that a
commit can have many parents - 1 for a plain commit, 2 for a simple merge,
but also more than 2 for merging several heads at once.
For merges there is a so called combine-diff, which shows diff, a merge
introduces by itself, omitting changes done by any parent. That works
through first finding paths, that are different to all parents, and then
showing generalized diff, with separate columns for +/- for each parent.
The code lives in combine-diff.c .
There is an impedance mismatch, however, in that a commit could
generally have any number of parents, and that while diffing trees, we
divide cases for 2-tree diffs and more-than-2-tree diffs. I mean there
is no special casing for multiple parents commits in e.g.
revision-walker .
That impedance mismatch *hurts* *performance* *badly* for generating
combined diffs - in "combine-diff: optimize combine_diff_path
sets intersection" I've already removed some slowness from it, but from
the timings provided there, it could be seen, that combined diffs still
cost more than an order of magnitude more cpu time, compared to diff for
usual commits, and that would only be an optimistic estimate, if we take
into account that for e.g. linux.git there is only one merge for several
dozens of plain commits.
That slowness comes from the fact that currently, while generating
combined diff, a lot of time is spent computing diff(commit,commit^2)
just to only then intersect that huge diff to almost small set of files
from diff(commit,commit^1).
That's because at present, to compute combine-diff, for first finding
paths, that "every parent touches", we use the following combine-diff
property/definition:
D(A,P1...Pn) = D(A,P1) ^ ... ^ D(A,Pn) (w.r.t. paths)
where
D(A,P1...Pn) is combined diff between commit A, and parents Pi
and
D(A,Pi) is usual two-tree diff Pi..A
So if any of that D(A,Pi) is huge, tracting 1 n-parent combine-diff as n
1-parent diffs and intersecting results will be slow.
And usually, for linux.git and other topic-based workflows, that
D(A,P2) is huge, because, if merge-base of A and P2, is several dozens
of merges (from A, via first parent) below, that D(A,P2) will be diffing
sum of merges from several subsystems to 1 subsystem.
The solution is to avoid computing n 1-parent diffs, and to find
changed-to-all-parents paths via scanning A's and all Pi's trees
simultaneously, at each step comparing their entries, and based on that
comparison, populate paths result, and deduce we could *skip*
*recursing* into subdirectories, if at least for 1 parent, sha1 of that
dir tree is the same as in A. That would save us from doing significant
amount of needless work.
Such approach is very similar to what diff_tree() does, only there we
deal with scanning only 2 trees simultaneously, and for n+1 tree, the
logic is a bit more complex:
D(T,P1...Pn) calculation scheme
-------------------------------
D(T,P1...Pn) = D(T,P1) ^ ... ^ D(T,Pn) (regarding resulting paths set)
D(T,Pj) - diff between T..Pj
D(T,P1...Pn) - combined diff from T to parents P1,...,Pn
We start from all trees, which are sorted, and compare their entries in
lock-step:
T P1 Pn
- - -
|t| |p1| |pn|
|-| |--| ... |--| imin = argmin(p1...pn)
| | | | | |
|-| |--| |--|
|.| |. | |. |
. . .
. . .
at any time there could be 3 cases:
1) t < p[imin];
2) t > p[imin];
3) t = p[imin].
Schematic deduction of what every case means, and what to do, follows:
1) t < p[imin] -> ∀j t ∉ Pj -> "+t" ∈ D(T,Pj) -> D += "+t"; t↓
2) t > p[imin]
2.1) ∃j: pj > p[imin] -> "-p[imin]" ∉ D(T,Pj) -> D += ø; ∀ pi=p[imin] pi↓
2.2) ∀i pi = p[imin] -> pi ∉ T -> "-pi" ∈ D(T,Pi) -> D += "-p[imin]"; ∀i pi↓
3) t = p[imin]
3.1) ∃j: pj > p[imin] -> "+t" ∈ D(T,Pj) -> only pi=p[imin] remains to investigate
3.2) pi = p[imin] -> investigate δ(t,pi)
|
|
v
3.1+3.2) looking at δ(t,pi) ∀i: pi=p[imin] - if all != ø ->
⎧δ(t,pi) - if pi=p[imin]
-> D += ⎨
⎩"+t" - if pi>p[imin]
in any case t↓ ∀ pi=p[imin] pi↓
~
For comparison, here is how diff_tree() works:
D(A,B) calculation scheme
-------------------------
A B
- -
|a| |b| a < b -> a ∉ B -> D(A,B) += +a a↓
|-| |-| a > b -> b ∉ A -> D(A,B) += -b b↓
| | | | a = b -> investigate δ(a,b) a↓ b↓
|-| |-|
|.| |.|
. .
. .
~~~~~~~~
This patch generalizes diff tree-walker to work with arbitrary number of
parents as described above - i.e. now there is a resulting tree t, and
some parents trees tp[i] i=[0..nparent). The generalization builds on
the fact that usual diff
D(A,B)
is by definition the same as combined diff
D(A,[B]),
so if we could rework the code for common case and make it be not slower
for nparent=1 case, usual diff(t1,t2) generation will not be slower, and
multiparent diff tree-walker would greatly benefit generating
combine-diff.
What we do is as follows:
1) diff tree-walker ll_diff_tree_sha1() is internally reworked to be
a paths generator (new name diff_tree_paths()), with each generated path
being `struct combine_diff_path` with info for path, new sha1,mode and for
every parent which sha1,mode it was in it.
2) From that info, we can still generate usual diff queue with
struct diff_filepairs, via "exporting" generated
combine_diff_path, if we know we run for nparent=1 case.
(see emit_diff() which is now named emit_diff_first_parent_only())
3) In order for diff_can_quit_early(), which checks
DIFF_OPT_TST(opt, HAS_CHANGES))
to work, that exporting have to be happening not in bulk, but
incrementally, one diff path at a time.
For such consumers, there is a new callback in diff_options
introduced:
->pathchange(opt, struct combine_diff_path *)
which, if set to !NULL, is called for every generated path.
(see new compat ll_diff_tree_sha1() wrapper around new paths
generator for setup)
4) The paths generation itself, is reworked from previous
ll_diff_tree_sha1() code according to "D(A,P1...Pn) calculation
scheme" provided above:
On the start we allocate [nparent] arrays in place what was
earlier just for one parent tree.
then we just generalize loops, and comparison according to the
algorithm.
Some notes(*):
1) alloca(), for small arrays, is used for "runs not slower for
nparent=1 case than before" goal - if we change it to xmalloc()/free()
the timings get ~1% worse. For alloca() we use just-introduced
xalloca/xalloca_free compatibility wrappers, so it should not be a
portability problem.
2) For every parent tree, we need to keep a tag, whether entry from that
parent equals to entry from minimal parent. For performance reasons I'm
keeping that tag in entry's mode field in unused bit - see S_IFXMIN_NEQ.
Not doing so, we'd need to alloca another [nparent] array, which hurts
performance.
3) For emitted paths, memory could be reused, if we know the path was
processed via callback and will not be needed later. We use efficient
hand-made realloc-style path_appendnew(), that saves us from ~1-1.5%
of potential additional slowdown.
4) goto(s) are used in several places, as the code executes a little bit
faster with lowered register pressure.
Also
- we should now check for FIND_COPIES_HARDER not only when two entries
names are the same, and their hashes are equal, but also for a case,
when a path was removed from some of all parents having it.
The reason is, if we don't, that path won't be emitted at all (see
"a > xi" case), and we'll just skip it, and FIND_COPIES_HARDER wants
all paths - with diff or without - to be emitted, to be later analyzed
for being copies sources.
The new check is only necessary for nparent >1, as for nparent=1 case
xmin_eqtotal always =1 =nparent, and a path is always added to diff as
removal.
~~~~~~~~
Timings for
# without -c, i.e. testing only nparent=1 case
`git log --raw --no-abbrev --no-renames`
before and after the patch are as follows:
navy.git linux.git v3.10..v3.11
before 0.611s 1.889s
after 0.619s 1.907s
slowdown 1.3% 0.9%
This timings show we did no harm to usual diff(tree1,tree2) generation.
From the table we can see that we actually did ~1% slowdown, but I think
I've "earned" that 1% in the previous patch ("tree-diff: reuse base
str(buf) memory on sub-tree recursion", HEAD~~) so for nparent=1 case,
net timings stays approximately the same.
The output also stayed the same.
(*) If we revert 1)-4) to more usual techniques, for nparent=1 case,
we'll get ~2-2.5% of additional slowdown, which I've tried to avoid, as
"do no harm for nparent=1 case" rule.
For linux.git, combined diff will run an order of magnitude faster and
appropriate timings will be provided in the next commit, as we'll be
taking advantage of the new diff tree-walker for combined-diff
generation there.
P.S. and combined diff is not some exotic/for-play-only stuff - for
example for a program I write to represent Git archives as readonly
filesystem, there is initial scan with
`git log --reverse --raw --no-abbrev --no-renames -c`
to extract log of what was created/changed when, as a result building a
map
{} sha1 -> in which commit (and date) a content was added
that `-c` means also show combined diff for merges, and without them, if
a merge is non-trivial (merges changes from two parents with both having
separate changes to a file), or an evil one, the map will not be full,
i.e. some valid sha1 would be absent from it.
That case was my initial motivation for combined diffs speedup.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --external-diff" incorrectly fed the submodule directory
in the working tree to the external diff driver when it knew it is
the same as one of the versions being compared.
* tr/diff-submodule-no-reuse-worktree:
diff: do not reuse_worktree_file for submodules
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return
correct status value.
* nd/diff-quiet-stat-dirty:
diff: do not quit early on stat-dirty files
diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
Replace open-coded reallocation with ALLOC_GROW() macro.
* dd/use-alloc-grow:
sha1_file.c: use ALLOC_GROW() in pretend_sha1_file()
read-cache.c: use ALLOC_GROW() in add_index_entry()
builtin/mktree.c: use ALLOC_GROW() in append_to_tree()
attr.c: use ALLOC_GROW() in handle_attr_line()
dir.c: use ALLOC_GROW() in create_simplify()
reflog-walk.c: use ALLOC_GROW()
replace_object.c: use ALLOC_GROW() in register_replace_object()
patch-ids.c: use ALLOC_GROW() in add_commit()
diffcore-rename.c: use ALLOC_GROW()
diff.c: use ALLOC_GROW()
commit.c: use ALLOC_GROW() in register_commit_graft()
cache-tree.c: use ALLOC_GROW() in find_subtree()
bundle.c: use ALLOC_GROW() in add_to_ref_list()
builtin/pack-objects.c: use ALLOC_GROW() in check_pbase_path()
"git diff --external-diff" incorrectly fed the submodule directory
in the working tree to the external diff driver when it knew it is
the same as one of the versions being compared.
* tr/diff-submodule-no-reuse-worktree:
diff: do not reuse_worktree_file for submodules
Avoid scanning strings twice, once with strchr() and then with
strlen(), by using strchrnul().
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rohit Mani <rohit.mani@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use ALLOC_GROW() instead of open-coding it in diffstat_add() and
diff_q().
Signed-off-by: Dmitry S. Dolzhenko <dmitrys.dolzhenko@yandex.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return
correct status value.
* nd/diff-quiet-stat-dirty:
diff: do not quit early on stat-dirty files
diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
When QUICK is set (i.e. with --quiet) we try to do as little work as
possible, stopping after seeing the first change. stat-dirty is
considered a "change" but it may turn out not, if no actual content is
changed. The actual content test is performed too late in the process
and the shortcut may be taken prematurely, leading to incorrect return
code.
Assume we do "git diff --quiet". If we have a stat-dirty file "a" and
a really dirty file "b". We break the loop in run_diff_files() and
stop after "a" because we have got a "change". Later in
diffcore_skip_stat_unmatch() we find out "a" is actually not
changed. But there's nothing else in the diff queue, we incorrectly
declare "no change", ignoring the fact that "b" is changed.
This also happens to "git diff --quiet HEAD" when it hits
diff_can_quit_early() in oneway_diff().
This patch does the content test earlier in order to keep going if "a"
is unchanged. The test result is cached so that when
diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on
re-testing "a".
Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_EXTERNAL_DIFF calling code attempts to reuse existing worktree
files for the worktree side of diffs, for performance reasons.
However, that code also tries to do the same with submodules. This
results in calls to $GIT_EXTERNAL_DIFF where the old-file is a file of
the form "Submodule commit $sha1", but the new-file is a directory in
the worktree.
Fix it by never reusing a worktree "file" in the submodule case.
Reported-by: Grégory Pakosz <gregory.pakosz@gmail.com>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/diff-filespec-cleanup:
diff_filespec: use only 2 bits for is_binary flag
diff_filespec: reorder is_binary field
diff_filespec: drop xfrm_flags field
diff_filespec: drop funcname_pattern_ident field
diff_filespec: reorder dirty_submodule macro definitions
The only mention of this field in the code is by some
debugging code which prints it out (and it will always be
zero, since we never touch it otherwise). It was obsoleted
very early on by 25d5ea4 ([PATCH] Redo rename/copy detection
logic., 2005-05-24).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git diff -O<file>" to be configured with a new configuration
variable.
* sb/diff-orderfile-config:
diff: add diff.orderfile configuration variable
diff: let "git diff -O" read orderfile from any file and fail properly
t4056: add new tests for "git diff -O"
Show the total number of paths and the number of paths shown so far
when "git difftool" prompts to launch an external diff tool, which
would give users some sense of progress.
* zk/difftool-counts:
diff.c: fix some recent whitespace style violations
difftool: display the number of files in the diff queue in the prompt
diff.orderfile acts as a default for the -O command line option.
[sb: split up aw's original patch; rework tests and docs, treat option
as pathname]
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Samuel Bronson <naesten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
When --prompt option is set, git-difftool displays a prompt for each
modified file to be viewed in an external diff program. At that
point, it could be useful to display a counter and the total number
of files in the diff queue.
Below is the current difftool prompt for the first of 5 modified files:
Viewing: 'diff.c'
Launch 'vimdiff' [Y/n]:
Consider the modified prompt:
Viewing (1/5): 'diff.c'
Launch 'vimdiff' [Y/n]:
The current GIT_EXTERNAL_DIFF mechanism does not tell the number of
paths in the diff queue nor the current counter. To make this
"counter/total" info available for GIT_EXTERNAL_DIFF programs
without breaking existing ones by doing the following:
- Keep track of the number of paths shown so far in diff_options;
- Export two new environment variables from run_external_diff() to
show the total number of paths (from diff_queue_struct) and the
current value of the counter (from diff_options); and
- Update git-difftool--helper to use these two environment variables.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
Teach "git diff --diff-filter" to express "I do not want to see
these classes of changes" more directly by listing only the
unwanted ones in lowercase (e.g. "--diff-filter=d" will show
everything but deletion) and deprecate "diff-files -q" which did
the same thing as "--diff-filter=d".
* jc/diff-filter-negation:
diff: deprecate -q option to diff-files
diff: allow lowercase letter to specify what change class to exclude
diff: reject unknown change class given to --diff-filter
diff: preparse --diff-filter string argument
diff: factor out match_filter()
diff: pass the whole diff_options to diffcore_apply_filter()
The condition in the ternary operator was wrong, hence the wrong char
pointer could be used as the parameter for show_submodule_summary.
one->path may be null, but we definitely need a non null path given
to the function.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Acked-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line being changed is deep inside the function builtin_diff.
The variable name_b, which is used to evaluate the ternary expression
must evaluate to true at that position, hence the replacement with
just name_b.
The name_b variable only occurs a few times in that lengthy function:
As a parameter to the function itself:
static void builtin_diff(const char *name_a,
const char *name_b,
...
The next occurrences are at:
/* Never use a non-valid filename anywhere if at all possible */
name_a = DIFF_FILE_VALID(one) ? name_a : name_b;
name_b = DIFF_FILE_VALID(two) ? name_b : name_a;
a_one = quote_two(a_prefix, name_a + (*name_a == '/'));
b_two = quote_two(b_prefix, name_b + (*name_b == '/'));
In the last line of this block 'name_b' is dereferenced and compared
to '/'. This would crash if name_b was NULL. Hence in the following code
we can assume name_b being non-null.
The next occurrence is just as a function argument, which doesn't change
the memory, which name_b points to, so the assumption name_b being not
null still holds:
emit_rewrite_diff(name_a, name_b, one, two,
textconv_one, textconv_two, o);
The next occurrence would be the line of this patch. As name_b still must
be not null, we can remove the ternary operator.
Inside the emit_rewrite_diff function there is a also a line
ecbdata.ws_rule = whitespace_rule(name_b ? name_b : name_a);
which was also simplified as there is also a dereference before the
ternary operator.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assorted code cleanups and a minor fix.
* sb/misc-fixes:
diff.c: Do not initialize a variable, which gets reassigned anyway.
commit: Fix a memory leak in determine_author_info
daemon.c:handle: Remove unneeded check for null pointer.
"git show -s" was less discoverable than it should be.
* mm/diff-no-patch-synonym-to-s:
Documentation/git-log.txt: capitalize section names
Documentation: move description of -s, --no-patch to diff-options.txt
Documentation/git-show.txt: include common diff options, like git-log.txt
diff: allow --patch & cie to override -s/--no-patch
diff: allow --no-patch as synonym for -s
t4000-diff-format.sh: modernize style
This was inherited from "show-diff -q" that was invented to tell
comparison between the index and the working tree to ignore only
removals in 2005.
These days, it is spelled as "--diff-filter=d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reimplements the ancient "-q" option to "git diff-files" that
was inherited from "show-diff -q" in terms of "--diff-filter=d". We
will be deprecating the "-q" option, so let's issue a warning when
we do so.
Incidentally this also tentatively fixes "git diff --no-index" to
honor "-q" and hide deletions; the use will get the same warning.
We should remove the support for "-q" in a future version but it is
not that urgent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All options that trigger a patch output now override --no-patch.
The case of --binary deserves extra attention: the name may suggest that
it turns a normal patch into a binary patch, but it actually already
enables patch output when normally disabled (e.g. "git log --binary"
displays a patch), hence it makes sense for "git show --no-patch
--binary" to display the binary patch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows the usual convention of having a --no-foo option to negate
--foo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to express "we do not care about deletions", we had to say
"--diff-filter=ACMRTXUB", giving all the possible change class
except for the one we do not want, "D".
This is cumbersome. As all the change classes are in uppercase,
allow their lowercase counterpart to selectively exclude the class
from the output. When such a negated change class is in the input,
start the filter option with the full bits set.
This would allow us to express the old "show-diff -q" with
"git diff-files --diff-filter=d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
