The linked list describing sort options was not correctly set up in
opt_parse_sort. In the result, contrary to the documentation, only the
last of multiple --sort options to git-for-each-ref was taken into
account. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation of git-for-each-ref says that --sort=<key> option can be
used multiple times, in which case the last key becomes the primary key.
However this functionality was never checked in test suite and is
currently broken. This commit adds appropriate test in preparation for fix.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Linus, this function is not checking UTF-8-ness of the
string; it only is seeing if it is pure US-ASCII.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One fictitious command "proxy-command" is enclosed inside a double
quote pair, while another fictitious command "default-proxy" is not
in the example, but the quoting does not change anything in the pair
of examples. Remove the quotes to avoid unnecessary confusion.
Noticed by Michael Haggerty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--add" option is required to add a new value to a multivalued
configuration entry.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second paragraph in the git(1) description section were meant to
guide people who are not ready to dive into this page away from here.
Referring migrating CVS users to another page before they get
acquainted with Git was somewhat out of place. Move the reference to
the "FURTHER DOCUMENTATION" section and push that section down.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one at kernel.org has not been updated for quite a while and
can no longer be called "the latest".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"stash apply" directly calls a backend merge function which does not
automatically invoke rerere. This confuses mergetool when leftover
rerere state is left behind from previous merges.
Invoke rerere explicitly when we encounter a conflict during stash
apply. This turns the test introduced by the previous commit to
succeed.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to make sure that a conflicted "stash apply" invokes
rerere to record the conflicts and resolve the the files it can
(the current code doesn't, so the test is marked as failing).
Without correct state recorded for rerere, mergetool may be
confused, causing it to think no files have conflicts even though
they do. This condition is not verified by this test since a
subsequent commit will change the behavior to enable rerere for
stash conflicts.
Also, the next test expected us to finish up with a reset, which is
impossible to do if we fail (as we must) and it's an unreasonable
expectation anyway. Begin the next test with a reset of its own
instead.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Remove extraneous parentheses and braces;
- Remove redundant NUL-termination before strcpy();
- Check result of unlink when probing for decomposed file names;
- Adjust for the coding style by adding missing whitespaces;
- Move storage class "static" at the beginning of the decl.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Letting the "--rebase" option squat on the short-and-sweet single
letter option "-r" was an unintended accident and was not even
documented, but the short option seems to be already used in the
wild. Let's document it so that other options that begin with "r"
would not be tempted to steal it.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was unclear what "--topo-order" was really about in the
documentation. It is not just about "children before parent", but
also about "don't mix lineages".
Reword the description for both "--date-order" and "--topo-order",
and add an illustration to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gitweb is used as a DirectoryIndex, it attempts to strip
PATH_INFO on its own, as $cgi->url() fails to do so.
However, it fails to account for the fact that PATH_INFO has
already been URL-decoded by the web server, but the value
returned by $cgi->url() has not been. This causes the stripping
to fail whenever the URL contains encoded characters.
To see this in action, setup gitweb as a DirectoryIndex and
then use it on a repository with a directory containing a
space in the name. Navigate to tree view, examine the gitweb
generated html and you'll see a link such as:
<a href="/test.git/tree/HEAD:/directory with spaces">directory with spaces</a>
When clicked on, the browser will URL-encode this link, giving
a $cgi->url() of the form:
/test.git/tree/HEAD:/directory%20with%20spaces
While PATH_INFO is:
/test.git/tree/HEAD:/directory with spaces
Fix this by calling unescape() on both $my_url and $my_uri before
stripping PATH_INFO from them.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier days, "imitate the style in the neibouring code" was
sufficient to keep the coherent style, but over time some parts of
the codebase have drifted enough to make it ineffective.
Spell some of the guidelines out.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People answer 'y' to "Who should the emails appear to be from?" and
'n' to "Message-ID to be used as In-Reply-To for the first email?"
for some unknown reason. While it is possible that your local
username really is "y" and you are sending the mail to your local
colleagues, it is possible, and some might even say it is likely,
that it is a user error.
Fortunately, our interactive prompter already has input validation
mechanism built-in. Enhance it so that we can optionally reconfirm
and allow the user to pass an input that does not validate, and
"softly" require input to the sender, in-reply-to, and recipient to
contain "@" and "." in this order, which would catch most cases of
mistakes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various subcommands of the "git submodule" command exited with 0
status even though the path given by the user did not exist.
The reason behind that was that they all pipe the output of
module_list into the while loop which then does the action on the
paths specified by the commandline. Since the exit code of the
command on the upstream side of the pipe is ignored by the shell,
the status code of "ls-files --error-unmatch" nor "module_list" was
not propagated.
In case ls-files returns with an error code, we write a special
string that is not possible in non error situations, and no other
output, so that the downstream can detect the error and die with an
error code.
The error message that there is an unmatched pathspec comes through
stderr directly from ls-files. So the user still gets a hint whats going
on.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetch-pack's verbose mode is more of a debugging mode (and
in fact takes two "-v" arguments to trigger via the
porcelain layer). Let's mention the server version as
another possible item of interest.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already take care to parse key/value capabilities like
"foo=bar", but the code does not provide a good way of
actually finding out what is on the right-hand side of the
"=".
A server using "parse_feature_request" could accomplish this
with some extra parsing. You must skip past the "key"
portion manually, check for "=" versus NUL or space, and
then find the length by searching for the next space (or
NUL). But clients can't even do that, since the
"server_supports" interface does not even return the
pointer.
Instead, let's have our parser share more information by
providing a pointer to the value and its length. The
"parse_feature_value" function returns a pointer to the
feature's value portion, along with the length of the value.
If the feature is missing, NULL is returned. If it does not
have an "=", then a zero-length value is returned.
Similarly, "server_feature_value" behaves in the same way,
but always checks the static server_feature_list variable.
We can then implement "server_supports" in terms of
"server_feature_value". We cannot implement the original
"parse_feature_request" in terms of our new function,
because it returned a pointer to the beginning of the
feature. However, no callers actually cared about the value
of the returned pointer, so we can simplify it to a boolean
just as we do for "server_supports".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same spirit as the previous fix, stop asking for thin-pack, no-progress
and include-tag capabilities when the other end does not claim to support them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
dcommit didn't handle errors returned by SVN and coped very
poorly with concurrent commits that appear in SVN repository
while dcommit was running. In both cases it left git repository
in inconsistent state: index (which was reset with `git reset
--mixed' after a successful commit to SVN) no longer matched the
checkouted tree, when the following commit failed or needed to be
rebased. See http://bugs.debian.org/676904 for examples.
This patch fixes the issues by:
- introducing error handler for dcommit. The handler will try
to rebase or reset working tree before returning error to the
end user. dcommit_rebase function was extracted out of cmd_dcommit
to ensure consistency between cmd_dcommit and the error handler.
- calling `git reset --mixed' only once after all patches are
successfully committed to SVN. This ensures index is not touched
for most of the time of dcommit run.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit ff5effdf taught both clients and servers of the git protocol
to send an "agent" capability that just advertises their version for
statistics and debugging purposes. The protocol-capabilities.txt
document however indicates that the client's advertisement is
actually a response, and should never include capabilities not
mentioned in the server's advertisement.
Adding the unconditional advertisement in the server programs was
OK, then, but the clients broke the protocol. The server
implementation of git-core itself does not care, but at least one
does: the Google Code git server (or any server using Dulwich), will
hang up with an internal error upon seeing an unknown capability.
Instead, each client must record whether we saw an agent string from
the server, and respond with its agent only if the server mentioned
it first.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have capabilities to send to the server, we send the
regular "want" line followed by a NUL, then the
capabilities; otherwise, we do not even send the NUL.
However, when checking whether we want to send the "quiet"
capability, we check args->quiet, which is wrong. That flag
only tells us whether the client side wanted to be quiet,
not whether the server supports it (originally, in c207e34f,
it meant both; however, that was later split into two flags
by 01fdc21f).
We still check the right flag when actually printing
"quiet", so this could only have two effects:
1. We might send the trailing NUL when we do not otherwise
need to. In theory, an antique pre-capability
implementation of git might choke on this (since the
client is instructed never to respond with capabilities
that the server has not first advertised).
2. We might also want to send the quiet flag if the
args->progress flag is false, but this code path would
not trigger in that instance.
In practice, it almost certainly never matters. The
report-status capability dates back to 2005. Any real-world
server is going to advertise that, and we will always
respond with at least that capability.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' uses the full onto sha1 for the reflog message whereas 'git
rebase -i' uses the short sha1. This is not only inconsistent, but can
lead to problems when the reflog is inspected at a later time at which
that abbreviation may have become ambiguous.
Make 'rebase -i' use the full onto sha1, as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
L10n updates for 1.7.12-rc2
* 'master' of git://github.com/git-l10n/git-po:
l10n: Update Swedish translation (1168t0f0u)
l10n: de.po: translate 77 new messages
l10n: vi.po: update one message
l10n: zh_CN.po: update one translation
l10n: Update one message in git.pot
Add test cases for 'git rebase --keep-empty' with and without an
"empty" commit already in upstream. The empty commit that is about to
be rebased should be kept in both cases.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent update to terminal I/O interface to get passwords &c
interactively didn't quite work on Solaris.
* bw/maint-1.7.9-solaris-getpass:
Enable HAVE_DEV_TTY for Solaris
terminal: seek when switching between reading and writing
Many scripted Porcelains rely on being able to split words at the
default $IFS characters, i.e. SP, HT and LF. If the user exports a
non-default IFS to the environment, what they read from plumbing
commands such as ls-files that use HT to delimit fields may not be
split in the way we expect.
Protect outselves by resetting it, just like we do so against CDPATH
exported to the environment.
Noticed by Andrew Dranse <adranse@oanda.com>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code tries to get a list of documented commands
by doing "ls Documentation/git*txt" and culling a bunch of
special cases from the result. Looking for "git-*.txt" would
be more accurate, but would miss a few commands like
"gitweb" and "gitk".
Fortunately, Documentation/Makefile already knows what this
list is, so we can just ask it. Annoyingly, we still have to
post-process its output a little, since make will print
extra cruft like "GIT-VERSION-FILE is up to date" to stdout.
Now that our list is accurate, we can remove all of the ugly
special-cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check-docs target special-cases git-help to avoid
mentioning it as "documented but removed". This dates back
to the early implementation of git-help, when its code was
simply included inside git.c.
These days it is a full-fledged builtin (in builtin/help.c)
and does not need special-casing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui is already documented and mentioned in command-list,
but adding it to the Makefile makes sure it is so. We also
add its alias git-citool (which is also documented).
As a result, we can drop them from the special case
statement that avoids them being listed as "documented but
does not exist".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check-docs command list is composed from several
Makefile variables plus some special cases. Let's make the
meaning of the list more obvious and avoid repeating
ourselves by factoring it out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These commands were never added to the command-list. Adding
them makes "make check-docs" run without complaint.
While we're at it, let's capitalize the first letter of
their one-line summaries to match the rest of the git
manpages.
The credential-cache--daemon command is somewhat special. It
is already ignored by check-docs because it contains a "--",
marking it as a non-interesting implementation detail. It
is, in fact, documented, but since the documentation
basically just redirects you to a more appropriate command
anyway, let's explicitly omit it so it is not mentioned in
git(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check-docs target looks at Documentation/git*txt and
complains if any entry does not have a matching command.
Therefore we need to explicitly ignore any entries which are
not meant to describe a command (like gitattributes.txt).
This list has grown stale over time, so let's bring it up to
date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like gitk, gitweb is not listed in the usual Makefile
variables and must be fed to check-docs specially. Otherwise
check-docs thinks it is documented but removed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e30b2feb1b (Jun 24 2012, add 'git credential' plumbing command)
forgot to add git-credential to command-list.txt, hence the command was
not appearing in the documentation, making it hard for users to discover
it.
While we're there, capitalize the description line for git-crendential
for consistency with other commands.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git prune" reports removal of loose object files that are no longer
necessary only under the "-v" option, but unconditionally reports
removal of temporary files that are no longer needed.
The original thinking was that the presence of a leftover temporary
file should be an unusual occurrence that may indicate an earlier
failure of some sort, and the user may want to be reminded of it.
Removing an unnecessary loose object file, on the other hand, is
just part of the normal operation. That is why the former is always
printed out and the latter only when -v is used.
But neither report is particularly useful. Hide both of these
behind the "-v" option for consistency.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
