Currently we do support matching pathspec "foo/" against directory
"foo". That is because match_pathspec() has no way to tell "foo" is a
directory and matching "foo/" against _file_ "foo" is wrong.
The callers can now tell match_pathspec if "foo" is a directory, we
could make an exception for this case. Code is not executed though
because no callers pass the flag yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps reduce the number of match_pathspec_depth() call sites and
show how m_p_d() is used. And it usage is:
- match against an index entry (ce_path_match or match_pathspec_depth
in ls-files)
- match against a dir_entry from read_directory (dir_path_match and
match_pathspec_depth in clean.c, which will be converted later)
- resolve-undo (rerere.c and ls-files.c)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that there is no implicit floating going on; --remote
lets you explicitly integrate the upstream branch in your current
HEAD (just like running 'git pull' in the submodule). The only
distinction with the current 'git pull' is the config location and
setting used for the upstream branch, which is hopefully clear now.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code only checked out branches in cmd_add. This commit
moves the branch-checkout logic into module_clone, where it can be
shared by cmd_add and cmd_update. I also update the initial checkout
command to use 'reset' to preserve branches setup during module_clone.
With this change, folks cloning submodules for the first time via:
$ git submodule update ...
will get a local branch instead of a detached HEAD, unless they are
using the default checkout-mode updates. This is a change from the
previous situation where cmd_update always used checkout-mode logic
(regardless of the requested update mode) for updates that triggered
an initial clone, which always resulted in a detached HEAD.
This commit does not change the logic for updates after the initial
clone, which will continue to create detached HEADs for checkout-mode
updates, and integrate remote work with the local HEAD (detached or
not) in other modes.
The motivation for the change is that developers doing local work
inside the submodule are likely to select a non-checkout-mode for
updates so their local work is integrated with upstream work.
Developers who are not doing local submodule work stick with
checkout-mode updates so any apparently local work is blown away
during updates. For example, if upstream rolls back the remote branch
or gitlinked commit to an earlier version, the checkout-mode developer
wants their old submodule checkout to be rolled back as well, instead
of getting a no-op merge/rebase with the rolled-back reference.
By using the update mode to distinguish submodule developers from
black-box submodule consumers, we can setup local branches for the
developers who will want local branches, and stick with detached HEADs
for the developers that don't care.
Testing
=======
In t7406, just-cloned checkouts now update to the gitlinked hash with
'reset', to preserve the local branch for situations where we're not
on a detached HEAD.
I also added explicit tests to t7406 for HEAD attachement after
cloning updates, showing that it depends on their update mode:
* Checkout-mode updates get detached HEADs
* Everyone else gets a local branch, matching the configured
submodule.<name>.branch and defaulting to master.
The 'initial-setup' tag makes it easy to reset the superproject to a
known state, as several earlier tests commit to submodules and commit
the changed gitlinks to the superproject, but don't push the new
submodule commits to the upstream subprojects. This makes it
impossible to checkout the current super master, because it references
submodule commits that don't exist in the upstream subprojects. For a
specific example, see the tests that currently generate the
'two_new_submodule_commits' commits.
Documentation
=============
I updated the docs to describe the 'submodule update' modes in detail.
The old documentation did not distinguish between cloning and
non-cloning updates and lacked clarity on which operations would lead
to detached HEADs, and which would not. The new documentation
addresses these issues while updating the docs to reflect the changes
introduced by this commit's explicit local branch creation in
module_clone.
I also add '--checkout' to the usage summary and group the update-mode
options into a single set.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids the current awkwardness of having either '' or 'checkout'
for checkout-mode updates, which makes testing for checkout-mode
updates (or non-checkout-mode updates) easier.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per Documentation/CodingGuidelines most C files in git start with
a #include of git-compat-util.h or another header file that includes
it, such as cache.h or builtin.h. This file doesn't need anything
beyond "git-compat-util.h", so use that.
Remove a #include of the system header <stdio.h> since it is already
included by "git-compat-util.h".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prevent the "test-hashmap" program from being accidentally tracked
with "git add" or cluttering "git status" output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Making a single preparation run for counting the lines will avoid memory
fragmentation. Also, fix the allocated memory size which was wrong
when sizeof(int *) != sizeof(int), and would have been too small
for sizeof(int *) < sizeof(int), admittedly unlikely.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are calling xrealloc on every single line, the least we can do
is get the right allocation size.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the origin pointers are "interned" and reference-counted, comparing
the pointers rather than the content is enough. The only uninterned
origins are cached values kept in commit->util, but same_suspect is not
called on them.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach add_cacheinfo to tell make_cache_entry to skip refreshing stat
information when a file is missing from the work tree. We do not want
the index to be stat-dirty after the merge but also do not want to fail
when a file happens to be missing.
This fixes the 'merge-recursive w/ empty work tree - ours has rename'
case in t3030-merge-recursive.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the make_cache_entry boolean 'refresh' argument to a more
general 'refresh_options' argument. Pass the value through to the
underlying refresh_cache_ent call. Add option CE_MATCH_REFRESH to
enable stat refresh. Update call sites to use the new signature.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move lstat ENOENT handling from refresh_index to refresh_cache_ent and
activate it with a new CE_MATCH_IGNORE_MISSING option. This will allow
other call paths into refresh_cache_ent to use the feature.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes when working with a large repository it can be useful to try
out a merge and only check out conflicting files to disk (for example as
a speed optimization on a server). Until v1.7.7-rc1~28^2~20
(merge-recursive: When we detect we can skip an update, actually skip
it, 2011-08-11), it was possible to do so with the following idiom:
# Prepare a temporary index and empty work tree.
GIT_INDEX_FILE="$PWD/tmp-$$-index" &&
export GIT_INDEX_FILE &&
GIT_WORK_TREE="$PWD/tmp-$$-work" &&
export GIT_WORK_TREE &&
mkdir "$GIT_WORK_TREE" &&
# Convince the index that our side is on disk.
git read-tree -i -m $ours &&
git update-index --ignore-missing --refresh &&
# Merge their side into our side.
bases=$(git merge-base --all $ours $theirs) &&
git merge-recursive $bases -- $ours $theirs &&
tree=$(git write-tree)
Nowadays, that still works and the exit status is the same, but
merge-recursive produces a diagnostic if "our" side renamed a file:
error: addinfo_cache failed for path 'dst'
Add a test to document this regression.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a config variable that allows setting the default index version when
initializing a new index file. Similar to the GIT_INDEX_VERSION
environment variable this only affects new index files.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow adding a TEST_GIT_INDEX_VERSION variable to config.mak to set the
index version with which the test suite should be run.
If it isn't set, the default version given in the source code is
used (currently version 3).
To avoid breakages with index versions other than [23], also set the
index version under which t2104 is run to 3. This test only tests
functionality specific to version 2 and 3 of the index file and would
fail if the test suite is run with any other version.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not obvious when looking at a new command what hooks will affect
it. Add a HOOKS section to the git-am(1) page, imitating
git-commit(1), to make it easier for people to discover e.g. the
applypatch-msg hook that can implement a custom subject-mangling
strategy (e.g., removing a "bug #nnnn:" prefix introduced by a bug
tracker).
Reported-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote we push can be defined either by
remote.pushdefault or by branch.*.pushremote for the current
branch. The order in which they appear in the config file
should not matter to precedence (which should be to prefer
the branch-specific config).
The current code parses the config linearly and uses a
single string to store both values, overwriting any
previous value. Thus, config like:
[branch "master"]
pushremote = foo
[remote]
pushdefault = bar
erroneously ends up pushing to "bar" from the master branch.
We can fix this by storing both values and resolving the
correct value after all config is read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many code paths assume that show_date and show_ident_date
cannot return NULL. For the most part, we handle missing or
corrupt timestamps by showing the epoch time t=0.
However, we might still return NULL if gmtime rejects the
time_t we feed it, resulting in a segfault. Let's catch this
case and just format t=0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an ident line has a ridiculous date value like (2^64)+1,
we currently just pass ULONG_MAX along to the date code,
which can produce nonsensical dates.
On systems with a signed long time_t (e.g., 64-bit glibc
systems), this actually doesn't end up too bad. The
ULONG_MAX is converted to -1, we apply the timezone field to
that, and the result ends up somewhere between Dec 31, 1969
and Jan 1, 1970.
However, there is still a few good reasons to detect the
overflow explicitly:
1. On systems where "unsigned long" is smaller than
time_t, we get a nonsensical date in the future.
2. Even where it would produce "Dec 31, 1969", it's easier
to recognize "midnight Jan 1" as a consistent sentinel
value for "we could not parse this".
3. Values which do not overflow strtoul but do overflow a
signed time_t produce nonsensical values in the past.
For example, on a 64-bit system with a signed long
time_t, a timestamp of 18446744073000000000 produces a
date in 1947.
We also recognize overflow in the timezone field, which
could produce nonsensical results. In this case we show the
parsed date, but in UTC.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we check whether a timestamp has overflowed, we check
only against ULONG_MAX, meaning that strtoul has overflowed.
However, we also feed these timestamps to system functions
like gmtime, which expect a time_t. On many systems, time_t
is actually smaller than "unsigned long" (e.g., because it
is signed), and we would overflow when using these
functions. We don't know the actual size or signedness of
time_t, but we can easily check for truncation with a simple
assignment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we check commit objects, we complain if commit->date is
ULONG_MAX, which is an indication that we saw integer
overflow when parsing it. However, we do not do any check at
all for author lines, which also contain a timestamp.
Let's actually check the timestamps on each ident line
with strtoul. This catches both author and committer lines,
and we can get rid of the now-redundant commit->date check.
Note that like the existing check, we compare only against
ULONG_MAX. Now that we are calling strtoul at the site of
the check, we could be slightly more careful and also check
that errno is set to ERANGE. However, this will make further
refactoring in future patches a little harder, and it
doesn't really matter in practice.
For 32-bit systems, one would have to create a commit at the
exact wrong second in 2038. But by the time we get close to
that, all systems will hopefully have moved to 64-bit (and
if they haven't, they have a real problem one second later).
For 64-bit systems, by the time we get close to ULONG_MAX,
all systems will hopefully have been consumed in the fiery
wrath of our expanding Sun.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When t4212 was originally added by 9dbe7c3d (pretty: handle
broken commit headers gracefully, 2013-04-17), it tested our
handling of commits with broken ident lines in which the
timestamps could not be parsed. It does so using a bogus line
like "Name <email>-<> 1234 -0000", because that simulates an
error that was seen in the wild.
Later, 03818a4 (split_ident: parse timestamp from end of
line, 2013-10-14) made our parser smart enough to actually
find the timestamp on such a line, and t4212 was adjusted to
match. While it's nice that we handle this real-world case,
this meant that we were not actually testing the
bogus-timestamp case anymore.
This patch adds a test with a totally incomprehensible
timestamp to make sure we are testing the code path.
Note that the behavior is slightly different between regular log
output and "--format=%ad". In the former case, we produce a
sentinel value and in the latter, we produce an empty
string. While at first this seems unnecessarily
inconsistent, it matches the original behavior given by
9dbe7c3d.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern versions of "git submodule" use .git-files to setup the
submodule directory. When run in a "git submodule"-created
repository "git difftool --dir-diff" dies with the following
error:
$ git difftool -d HEAD~
fatal: This operation must be run in a work tree
diff --raw --no-abbrev -z HEAD~: command returned error: 128
core.worktree is relative to the .git directory but the logic
in find_worktree() does not account for it.
Use `git rev-parse --show-toplevel` to find the worktree so that
the dir-diff feature works inside a submodule.
Reported-by: Gábor Lipták <gabor.liptak@gmail.com>
Helped-by: Jens Lehmann <jens.lehmann@web.de>
Helped-by: John Keeping <john@keeping.me.uk>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bitfields need to specify their signedness explicitly or the compiler is
free to default as it sees fit. With compilers that default 'unsigned'
(SUNWspro 12 seems to do this) the tri-state nature of is_binary
vanishes and all files are treated as binary.
Signed-off-by: Richard Lowe <richlowe@richlowe.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Respect a GIT_INDEX_VERSION environment variable, when a new index is
initialized. Setting the environment variable will not cause existing
index files to be converted to another format, but will only affect
newly written index files. This can be used to initialize repositories
with index-v4.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, show that --short and --porcelain, while implying
--dry-run, do not return the same exit code as --dry-run. This is due to
the wt_status.commitable flag being set only when a long status is
requested.
No fix is provided here; with [1], it should be trivial to fix though -
just a matter of calling wt_status_mark_commitable().
[1] http://article.gmane.org/gmane.comp.version-control.git/242489
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document --keep-index's short form -k in both main synopsis and
the save synopsis in the Options section.
Signed-off-by: John Marshall <jm18@sanger.ac.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the return value of sha1_file_name() to (const char *).
(Callers have no business mucking about here.) Change callers
accordingly, deleting a few superfluous temporary variables along the
way.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a comment at the declaration of last_found_pack and where it is
used in find_pack_entry(). In the latter, separate the cases (1) to
make a place for the new comment and (2) to turn the success case into
affirmative logic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give the poor humans some names to help them make sense of things.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This delta_stack array can grow to any length depending on the actual
delta chain, but we forget to free it. Normally it does not matter
because we use small_delta_stack[] from stack and small_delta_stack
can hold 64-delta chains, more than standard --depth=50 in pack-objects.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the the transport helper says it was a forced update, then it is
a forced update. It is however possible that an update is forced
without the transport-helper knowing about it, namely because some
higher up code had objections to the update and needed forcing in
order to let it through to the transport helper. In other words, it
does not necessarily mean the update was *not* forced, when the
helper did not say "forced update".
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics of this flag was changed in commit
e1111cef23 inline lookup_replace_object() calls
but wasn't renamed at the time to minimize code churn. Rename it now,
and add a comment explaining its use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.8.4 (about six months ago) wildmatch is used as default
replacement for fnmatch. We have seen only one fix since so wildmatch
probably has done a good job as fnmatch replacement. This concludes
the fnmatch->wildmatch transition by no longer relying on fnmatch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 1b25892636. compat
fnmatch will be removed soon and we can't rely on fnmatch() available
everywhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turns out that putting 'link:' before the 'http' is actually superfluous
in AsciiDoc, as there's already a predefined macro to handle it.
"http, https, [etc] URLs are rendered using predefined inline macros."
http://www.methods.co.nz/asciidoc/userguide.html#_urls
"Hypertext links to files on the local file system are specified
using the link inline macro."
http://www.methods.co.nz/asciidoc/userguide.html#_linking_to_local_documents
Despite being superfluous, the reference implementation of AsciiDoc
tolerates the extra 'link:' and silently removes it, giving a functioning
link in the generated HTML. However, AsciiDoctor (the Ruby implementation
of AsciiDoc used to render the http://git-scm.com/ site) does /not/ have
this behaviour, and so generates broken links, as can be seen here:
http://git-scm.com/docs/git-cvsimport (links to cvs2git & parsecvs)
http://git-scm.com/docs/git-filter-branch (link to The BFG)
It's worth noting that after this change, the html generated by 'make html'
in the git project is identical, and all links still work.
Signed-off-by: Roberto Tyley <roberto.tyley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently "git notes add -C $object" will read the raw bytes from $object,
and then copy those bytes into the note object, which is hardcoded to be
of type blob. This means that if the given $object is a non-blob (e.g.
tree or commit), the raw bytes from that object is copied into a blob
object. This is probably not useful, and certainly not what any sane
user would expect. So disallow it, by erroring out if the $object passed
to the -C option is not a blob.
The fix also applies to the -c option (in which the user is prompted to
edit/verify the note contents in a text editor), and also when -c/-C is
passed to "git notes append" (which appends the $object contents to an
existing note object). In both cases, passing a non-blob $object does not
make sense.
Also add a couple of tests demonstrating expected behavior.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When displaying a blob in gitweb, if it's an image, specify constraints for
maximum display width and height to prevent the image from overflowing the
frame of the enclosing page_body div.
This change assumes that it is more desirable to see the whole image without
scrolling (new behavior) than it is to see every pixel without zooming
(previous behavior).
Signed-off-by: Andrew Keller <andrew@kellerfarm.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch extends git config --file interface to allow read config from
stdin.
Editing stdin or setting value in stdin is an error.
Include by absolute path is allowed in stdin config, but not by relative
path.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're going to have more options for config source.
Let's alter git_config_with_options() interface to accept struct with
all source options.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
