Add a --stdin signature to read update instructions from standard input
and apply multiple ref updates together. Use an input format that
supports any update that could be specified via the command-line,
including object names like "branch:path with space".
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.
Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.
Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is now standard practice in Git to have both short and long option
names. So let's give a long option name to the git replace options too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users replacing an object with one of a different type were not
prevented to do so, even if it was obvious, and stated in the doc,
that bad things would result from doing that.
To avoid mistakes, it is better to just forbid that though.
If -f option, which means '--force', is used, we can allow an object
to be replaced with one of a different type, as the user should know
what (s)he is doing.
If one object is replaced with one of a different type, the only way
to keep the history valid is to also replace all the other objects
that point to the replaced object. That's because:
* Annotated tags contain the type of the tagged object.
* The tree/parent lines in commits must be a tree and commits, resp.
* The object types referred to by trees are specified in the 'mode'
field:
100644 and 100755 blob
160000 commit
040000 tree
(these are the only valid modes)
* Blobs don't point at anything.
The doc will be updated in a later patch.
Acked-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 480ca64 (convert run_add_interactive to use struct pathspec -
2013-07-14), we have unconditionally passed :(prefix)xxx to
add-interactive.perl. It implies that all commands
add-interactive.perl calls must be aware of pathspec magic, or
:(prefix) is barfed. The restriction to :/ only becomes unnecessary.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace 'committish' in documentation and comments with 'commit-ish'
to match gitglossary(7) and to be consistent with 'tree-ish'.
The only remaining instances of 'committish' are:
* variable, function, and macro names
* "(also committish)" in the definition of commit-ish in
gitglossary[7]
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert most uses of OPT_BOOLEAN/OPTION_BOOLEAN that can use
OPT_BOOL/OPTION_BOOLEAN which have much saner semantics, and turn
remaining ones into OPT_SET_INT, OPT_COUNTUP, etc. as necessary.
* sb/parseopt-boolean-removal:
revert: use the OPT_CMDMODE for parsing, reducing code
checkout-index: fix negations of even numbers of -n
config parsing options: allow one flag multiple times
hash-object: replace stdin parsing OPT_BOOLEAN by OPT_COUNTUP
branch, commit, name-rev: ease up boolean conditions
checkout: remove superfluous local variable
log, format-patch: parsing uses OPT__QUIET
Replace deprecated OPT_BOOLEAN by OPT_BOOL
Remove deprecated OPTION_BOOLEAN for parsing arguments
Many commands use --dashed-option as a operation mode selector
(e.g. "git tag --delete") that the user can use at most one
(e.g. "git tag --delete --verify" is a nonsense) and you cannot
negate (e.g. "git tag --no-delete" is a nonsense). Make it easier
for users of parse_options() to enforce these restrictions.
* jc/parseopt-command-modes:
tag: use OPT_CMDMODE
parse-options: add OPT_CMDMODE()
Handle memory pressure and file descriptor pressure separately when
deciding to release pack windows to honor resource limits.
* bc/unuse-packfile:
Don't close pack fd when free'ing pack windows
sha1_file: introduce close_one_pack() to close packs on fd pressure
"git check-ignore -z" applied the NUL termination to both its input
(with --stdin) and its output, but "git check-attr -z" ignored the
option on the output side.
This is potentially a backward incompatible fix. Let's see if
anybody screams before deciding if we want to do anything to help
existing users (there may be none).
* jc/check-x-z:
check-attr -z: a single -z should apply to both input and output
check-ignore -z: a single -z should apply to both input and output
check-attr: the name of the character is NUL, not NULL
check-ignore: the name of the character is NUL, not NULL
Split into a separate helper function get_commit() so that the part that
finds the relevant commit, and the part that does something with it
(handle tag object, etc.) are in different places.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to pass it around everywhere. This would make easier
further refactoring that makes use of this variable.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 3fde386 (reset [--mixed]: use diff-based reset whether or
not pathspec was given), some code can be moved to the 'reset_type ==
MIXED' check.
Let's move the code that is specific to MIXED.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose lock_ref_sha1_basic's type_p argument to callers of
lock_any_ref_for_update. Update all call sites to ignore it by passing
NULL for now.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function resets refs rather than doing arbitrary updates.
Rename it to allow a future general-purpose update_refs function
to be added.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues an "'prepare_transport' was not declared. Should it
be static?" warning. In order to suppress the warning, since this
symbol only requires file scope, we simply add the static modifier
to it's declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mark_edges_uninteresting() is always called with this form
mark_edges_uninteresting(revs->commits, revs, ...);
Remove the first argument and let mark_edges_uninteresting figure that
out by itself. It helps answer the question "are this commit list and
revs related in any way?" when looking at mark_edges_uninteresting
implementation.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command "git branch -vv" will report tracking branches, but invalid
tracking branches are also reported. This is because the function
stat_tracking_info() can not distinguish invalid tracking branch
from other cases which it would not like to report, such as
there is no upstream settings at all, or nothing is changed between
one branch and its upstream.
Junio suggested missing upstream should be reported [1] like:
$ git branch -v -v
master e67ac84 initial
* topic 3fc0f2a [topicbase: gone] topic
$ git status
# On branch topic
# Your branch is based on 'topicbase', but the upstream is gone.
# (use "git branch --unset-upstream" to fixup)
...
$ git status -b -s
## topic...topicbase [gone]
...
In order to do like that, we need to distinguish these three cases
(i.e. no tracking, with configured but no longer valid tracking, and
with tracking) in function stat_tracking_info(). So the refactored
function stat_tracking_info() has three return values: -1 (with "gone"
base), 0 (no base), and 1 (with base).
If the caller does not like to report tracking info when nothing
changed between the branch and its upstream, simply checks if
num_theirs and num_ours are both 0.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/231830/focus=232288
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --author=$name" sets the author to one whose name
matches the given string from existing commits, when $name is not in
the "Name <e-mail>" format. However, it does not honor the mailmap
to use the canonical name for the author found this way.
Fix it by telling the logic to find a matching existing author to
honor the mailmap, and use the name and email after applying the
mailmap.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ls-files -o" and "ls-files -k" both traverse the working tree down
to find either all untracked paths or those that will be "killed"
(removed from the working tree to make room) when the paths recorded
in the index are checked out. It is necessary to traverse the
working tree fully when enumerating all the "other" paths, but when
we are only interested in "killed" paths, we can take advantage of
the fact that paths that do not overlap with entries in the index
can never be killed.
The treat_one_path() helper function, which is called during the
recursive traversal, is the ideal place to implement an
optimization.
When we are looking at a directory P in the working tree, there are
three cases:
(1) P exists in the index. Everything inside the directory P in
the working tree needs to go when P is checked out from the
index.
(2) P does not exist in the index, but there is P/Q in the index.
We know P will stay a directory when we check out the contents
of the index, but we do not know yet if there is a directory
P/Q in the working tree to be killed, so we need to recurse.
(3) P does not exist in the index, and there is no P/Q in the index
to require P to be a directory, either. Only in this case, we
know that everything inside P will not be killed without
recursing.
Note that this helper is called by treat_leading_path() that decides
if we need to traverse only subdirectories of a single common
leading directory, which is essential for this optimization to be
correct. This caller checks each level of the leading path
component from shallower directory to deeper ones, and that is what
allows us to only check if the path appears in the index. If the
call to treat_one_path() weren't there, given a path P/Q/R, the real
traversal may start from directory P/Q/R, even when the index
records P as a regular file, and we would end up having to check if
any leading subpath in P/Q/R, e.g. P, appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- From the beginning of push.c in 755225d, 2006-04-29, "thin" option
was enabled by default but could be turned off with --no-thin.
- Then Shawn changed the default to 0 in favor of saving server
resources in a4503a1, 2007-09-09. --no-thin worked great.
- One day later, in 9b28851 Daniel extracted some code from push.c to
create transport.c. He (probably accidentally) flipped the default
value from 0 to 1 in transport_get().
From then on --no-thin is effectively no-op because git-push still
expects the default value to be false and only calls
transport_set_option() when "thin" variable in push.c is true (which
is unnecessary). Correct the code to respect --no-thin by calling
transport_set_option() in both cases.
receive-pack learns about --reject-thin-pack-for-testing option,
which only is for testing purposes, hence no document update.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of 7612a1efdb (2006-06-09 git-rm: honor -n flag.) the variable
'pathspec' seems to be assumed to be never NULL after calling get_pathspec
There was a NULL pointer check after the seen = NULL assignment, which
was removed by that commit. So if pathspec would be NULL now, we'd segfault
in the line accessing the pathspec:
for (i = 0; pathspec[i] ; i++)
A few lines later, 'pathspec' still cannot be NULL, but that check was
overlooked, hence removing it now.
As the null pointer check was removed, it makes no sense to assign NULL
to seen and 3 lines later another value as there are no conditions in
between.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not feed a random string as the first parameter to die(); use "%s"
as the format string instead.
Do the same for test-urlmatch-normalization.c while saving a single
pointer variable by turning a "const char *" constant string into
"const char []", which is sufficient to squelch compilation warning
(the compiler can see usage[] given to die() is a constant and will
never have conversion specifiers that cause trouble). But for a
good measure, give them the same "%s" treatment as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This may happen when `git gc --auto` is run automatically, then the
user, to avoid wait time, switches to a new terminal, keeps working
and `git gc --auto` is started again because the first gc instance has
not clean up the repository.
This patch tries to avoid multiple gc running, especially in --auto
mode. In the worst case, gc may be delayed 12 hours if a daemon reuses
the pid stored in gc.pid.
kill(pid, 0) support is added to MinGW port so it should work on
Windows too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A Git-aware "connect" transport allows the "transport_take_over" to
redirect generic transport requests like fetch(), push_refs() and
get_refs_list() to the native Git transport handling methods. The
take-over process replaces transport->data with a fake data that
these method implementations understand.
While this hack works OK for a single request, it breaks when the
transport needs to make more than one requests. transport->data
that used to hold necessary information for the specific helper to
work correctly is destroyed during the take-over process.
One codepath that this matters is "git fetch" in auto-follow mode;
when it does not get all the tags that ought to point at the history
it got (which can be determined by looking at the peeled tags in the
initial advertisement) from the primary transfer, it internally
makes a second request to complete the fetch. Because "take-over"
hack has already destroyed the data necessary to talk to the
transport helper by the time this happens, the second request cannot
make a request to the helper to make another connection to fetch
these additional tags.
Mark such a transport as "cannot_reuse", and use a separate
transport to perform the backfill fetch in order to work around
this breakage.
Note that this problem does not manifest itself when running t5802,
because our upload-pack gives you all the necessary auto-followed
tags during the primary transfer. You would need to step through
"git fetch" in a debugger, stop immediately after the primary
transfer finishes and writes these auto-followed tags, remove the
tag references and repack/prune the repository to convince the
"find-non-local-tags" procedure that the primary transfer failed to
give us all the necessary tags, and then let it continue, in order
to trigger the bug in the secondary transfer this patch fixes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually the upload-pack process running on the other side will give
us all the reachable tags we need during the primary object transfer
in do_fetch(). If that does not happen (e.g. the other side may be
running a third-party implementation of upload-pack), we will run
another fetch to pick up leftover tags that we know point at the
commits reachable from our updated tips.
Separate out the code to run this second fetch into a helper
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make a helper function prepare_transport() that returns a transport
to talk to a given remote.
The set_option() helper that used to always affect the file-scope
global "gtransport" now takes a transport as its parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although many functions in this file take a "struct transport" as a
parameter, "fetch_one()" assigns to the global singleton instance
which is a file-scope static, in order to allow a parameterless
signal handler unlock_pack() to access it.
Rename the variable to gtransport to make sure these uses stand out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revert command comes with their own implementation of checking
for exclusiveness of parameters.
Now that the OPT_CMDMODE is in place, we can also rely on that macro
instead of cooking that solution for each command itself.
This commit also replaces OPT_BOOLEAN, which was deprecated by b04ba2bb
(parse-options: deprecate OPT_BOOLEAN, 2011-09-27). Instead OPT_BOOL is
used.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --no-create was parsed with OPT_BOOLEAN, which has a counting up
logic implemented. Since b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27) the OPT_BOOLEAN is deprecated and is only a define:
/* Deprecated synonym */
#define OPTION_BOOLEAN OPTION_COUNTUP
However the variable not_new, which can be counted up by giving
--no-create multiple times, is used to set a bit in the struct checkout
bitfield (defined in cache.h:969, declared at builtin/checkout-index.c:19):
state.not_new = not_new;
When assigning a value other than 0 or 1 to a bit, all leading digits but
the last are ignored and only the last bit is used for setting the bit
variable.
Hence the following:
# in git.git:
$ git status
# working directory clean
rm COPYING
$ git status
# deleted: COPYING
$ git checkout-index -a -n
$ git status
# deleted: COPYING
# which is expected as we're telling git to not restore or create
# files, however:
$ git checkout-index -a -n -n
$ git status
# working directory clean, COPYING is restored again!
# That's the bug, we're fixing here.
By restraining the variable not_new to a value being definitely 0 or 1
by the macro OPT_BOOL the bug is fixed.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27).
This commit introduces a change for the users, after this patch
you can pass one of the config level flags multiple times:
Before:
$ git config --global --global --list
error: only one config file at a time.
usage: ...
Afterwards this will work. This is due to the following check in the code:
if (use_global_config + use_system_config + use_local_config +
!!given_config_file + !!given_config_blob > 1) {
error("only one config file at a time.");
usage_with_options(builtin_config_usage, builtin_config_options);
}
With OPT_BOOL instead of OPT_BOOLEAN the variables use_global_config,
use_system_config, use_local_config will only have the value 0 if the
command line option was not passed or 1 no matter how often the
respective command line option was passed.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). hash-object is a plumbing layer command, so better
not change the input/output behavior for now.
Unfortunately we have these lines relying on the count up mechanism of
OPT_BOOLEAN:
if (hashstdin > 1)
errstr = "Multiple --stdin arguments are not supported";
Using OPT_BOOL will make "git hash-object --stdin --stdin" the same
as "git hash-object --stdin", resulting in just one object, which
will surprise users with an expectation to see two objects hashed.
Because it is not good to silently succeed and give an unexpected
result, even when the expectation is unrealistic, we use COUNTUP to
explicitly catch such an error.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the variables are set by OPT_BOOL, which makes sure
to have the values being 0 or 1 after parsing, we do not need
the double negation to map any other value to 1 for integer
variables.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Range specification -L/RE/ for blame/log unconditionally begins
searching at line one. Mailing list discussion [1] suggests that, in the
presence of multiple -L options, -L/RE/ should search relative to the
endpoint of the previous -L range, if any.
Teach the parsing machinery underlying blame's and log's -L options to
accept a start point for -L/RE/ searches. Follow-up patches will upgrade
blame and log to take advantage of this ability.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/229755/focus=229966
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-blame accepts only a single -L option or none. Clients requiring
blame information for multiple disjoint ranges are therefore forced
either to invoke git-blame multiple times, once for each range, or only
once with no -L option to cover the entire file, both of which can be
costly. Teach git-blame to accept multiple -L ranges. Overlapping and
out-of-order ranges are accepted.
In this patch, the X in -LX,Y is absolute (for instance, /RE/ patterns
search from line 1), and Y is relative to X. Follow-up patches provide
more flexibility over how X is anchored.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of 25ed3412 (Refactor parse_loc; 2013-03-28),
blame.c:prepare_blame_range() became effectively a one-line function
which merely passes its arguments along to another function. This
indirection does not bring clarity to the code. Simplify by inlining
prepare_blame_range() into its lone caller.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule removes the submodule's work tree
from that of the superproject and the gitlink from the index. But the
submodule's section in .gitmodules is left untouched, which is a leftover
of the now removed submodule and might irritate users (as opposed to the
setting in .git/config, this must stay as a reminder that the user showed
interest in this submodule so it will be repopulated later when an older
commit is checked out).
Let "git rm" help the user by not only removing the submodule from the
work tree but by also removing the "submodule.<submodule name>" section
from the .gitmodules file and stage both. This doesn't happen when the
"--cached" option is used, as it would modify the work tree. This also
silently does nothing when no .gitmodules file is found and only issues a
warning when it doesn't have a section for this submodule. This is because
the user might just use plain gitlinks without the .gitmodules file or has
already removed the section by hand before issuing the "git rm" command
(in which case the warning reminds him that rm would have done that for
him). Only when .gitmodules is found and contains merge conflicts the rm
command will fail and tell the user to resolve the conflict before trying
again.
Also extend the man page to inform the user about this new feature. While
at it promote the submodule sub-section to a chapter as it made not much
sense under "REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM".
In t7610 three uses of "git rm submod" had to be replaced with "git rm
--cached submod" because that test expects .gitmodules and the work tree
to stay untouched. Also in t7400 the tests for the remaining settings in
the .gitmodules file had to be changed to assert that these settings are
missing.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git mv" on a submodule moves the submodule's work tree in
that of the superproject. But the submodule's path setting in .gitmodules
is left untouched, which is now inconsistent with the work tree and makes
git commands that rely on the proper path -> name mapping (like status and
diff) behave strangely.
Let "git mv" help here by not only moving the submodule's work tree but
also updating the "submodule.<submodule name>.path" setting from the
.gitmodules file and stage both. This doesn't happen when no .gitmodules
file is found and only issues a warning when it doesn't have a section for
this submodule. This is because the user might just use plain gitlinks
without the .gitmodules file or has already updated the path setting by
hand before issuing the "git mv" command (in which case the warning
reminds him that mv would have done that for him). Only when .gitmodules
is found and contains merge conflicts the mv command will fail and tell
the user to resolve the conflict before trying again.
Also extend the man page to inform the user about this new feature.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the same urlmatch_config_entry() infrastructure, add a new
mode "--get-urlmatch" to the "git config" command, to learn values
for the "virtual" two-level variables customized for the specific
URL.
git config [--<type>] --get-urlmatch <section>[.<key>] <url>
With <section>.<key> fully specified, the configuration data for
<section>.<urlpattern>.<key> for <urlpattern> that best matches the
given <url> is sought (and if not found, <section>.<key> is used)
and reported. For example, with this configuration:
[http]
sslVerify
[http "https://weak.example.com"]
cookieFile = /tmp/cookie.txt
sslVerify = false
You would get
$ git config --bool --get-urlmatch http.sslVerify https://good.example.com
true
$ git config --bool --get-urlmatch http.sslVerify https://weak.example.com
false
With only <section> specified, you can get a list of all variables
in the section with their values that apply to the given URL. E.g
$ git config --get-urlmatch http https://weak.example.com
http.cookiefile /tmp/cookie.txt
http.sslverify false
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to reuse the logic to format the configuration value while
honouring the requested type, split this function into two.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since inception, -LX,Y has correctly reported an out-of-range error when
Y is beyond end of file, however, X was not checked, and an out-of-range
X would cause a crash. 92f9e273 (blame: prevent a segv when -L given
start > EOF; 2010-02-08) attempted to rectify this shortcoming but has
its own off-by-one error which allows X to extend one line past end of
file. For example, given a file with 5 lines:
git blame -L5 foo # OK, blames line 5
git blame -L6 foo # accepted, no error, no output, huh?
git blame -L7 foo # error "fatal: file foo has only 5 lines"
Fix this bug.
In order to avoid regressing "blame foo" when foo is an empty file, the
fix is slightly more complicated than changing '<' to '<='.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows users to use the short form -q on
log and format-patch, which was non possible before.
Also the documentation of format-patch mentions -q now.
The documentation of log doesn't even talk about --quiet, so I'll leave
that for more experienced git contributors. ;)
It doesn't seem to change the default behavior, but in combination
with --stat for example it suppresses the actual stats.
however the only relevant code in log is
if (quiet)
rev->diffopt.output_format |= DIFF_FORMAT_NO_OUTPUT;
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of b04ba2bb4 OPTION_BOOLEAN was deprecated.
This commit removes all occurrences of OPTION_BOOLEAN.
In b04ba2bb4 Junio suggested to replace it with either
OPTION_SET_INT or OPTION_COUNTUP instead. However a pattern, which
occurred often with the OPTION_BOOLEAN was a hidden boolean parameter.
So I defined OPT_HIDDEN_BOOL as an additional possible parse option
in parse-options.h to make life easy.
The OPT_HIDDEN_BOOL was used in checkout, clone, commit, show-ref.
The only exception, where there was need to fiddle with OPTION_SET_INT
was log and notes. However in these two files there is also a pattern,
so we could think of introducing OPT_NONEG_BOOL.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c334b87b (cat-file: split --batch input lines on whitespace,
2013-07-11) taught `cat-file --batch-check` to split input lines on
the first whitespace, and stash everything after the first token
into the %(rest) output format element. It claimed:
Object names cannot contain spaces, so any input with
spaces would have resulted in a "missing" line.
But that is not correct. Refs, object sha1s, and various peeling
suffixes cannot contain spaces, but some object names can. In
particular:
1. Tree paths like "[<tree>]:path with whitespace"
2. Reflog specifications like "@{2 days ago}"
3. Commit searches like "rev^{/grep me}" or ":/grep me"
To remain backwards compatible, we cannot split on whitespace by
default, hence we will ship 1.8.4 with the commit reverted.
Resurrect its attempt but in a weaker form; only do the splitting
when "%(rest)" is used in the output format. Since that element did
not exist at all before c334b87, old scripts cannot be affected.
The existence of object names with spaces does mean that you
cannot reliably do:
echo ":path with space and other data" |
git cat-file --batch-check="%(objectname) %(rest)"
as it would split the path and feed only ":path" to get_sha1. But
that command is nonsensical. If you wanted to see "and other data"
in "%(rest)", git cannot possibly know where the filename ends and
the "rest" begins.
It might be more robust to have something like "-z" to separate the
input elements. But this patch is still a reasonable step before
having that. It makes the easy cases easy; people who do not care
about %(rest) do not have to consider it, and the %(rest) code
handles the spaces and newlines of "rev-list --objects" correctly.
Hard cases remain hard but possible (if you might get whitespace in
your input, you do not get to use %(rest) and must split and join
the output yourself using more flexible tools). And most
importantly, it does not preclude us from having different splitting
rules later if a "-z" (or similar) option is added. So we can make
the hard cases easier later, if we choose to.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last argument for parse_push_cas_option() is if it is "unset"
(i.e. --no-force-with-lease), and we are parsing the option with an
explicit value here, so it has to be 0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit c334b87b30c1464a1ab563fe1fb8de5eaf0e5bac; the
update assumed that people only used the command to read from
"rev-list --objects" output, whose lines begin with a 40-hex object
name followed by a whitespace, but it turns out that scripts feed
random extended SHA-1 expressions (e.g. "HEAD:$pathname") in which
a whitespace has to be kept.
Now that close_one_pack() has been introduced to handle file
descriptor pressure, it is not strictly necessary to close the
pack file descriptor in unuse_one_window() when we're under memory
pressure.
Jeff King provided a justification for leaving the pack file open:
If you close packfile descriptors, you can run into racy situations
where somebody else is repacking and deleting packs, and they go away
while you are trying to access them. If you keep a descriptor open,
you're fine; they last to the end of the process. If you don't, then
they disappear from under you.
For normal object access, this isn't that big a deal; we just rescan
the packs and retry. But if you are packing yourself (e.g., because
you are a pack-objects started by upload-pack for a clone or fetch),
it's much harder to recover (and we print some warnings).
Let's do so (or uh, not do so).
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consolidate two messages phrased subtly differently without a good
reason.
* jc/rm-submodule-error-message:
builtin/rm.c: consolidate error reporting for removing submodules
When moving a submodule which uses a gitfile to point to the git directory
stored in .git/modules/<name> of the superproject two changes must be made
to make the submodule work: the .git file and the core.worktree setting
must be adjusted to point from work tree to git directory and back.
Achieve that by remembering which submodule uses a gitfile by storing the
result of read_gitfile() of each submodule. If that is not NULL the new
function connect_work_tree_and_git_dir() is called after renaming the
submodule's work tree which updates the two settings to the new values.
Extend the man page to inform the user about that feature (and while at it
change the description to not talk about a script anymore, as mv is a
builtin for quite some time now).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the attempt to use "git mv" on a submodule errors out with:
fatal: source directory is empty, source=<src>, destination=<dest>
The reason is that mv searches for the submodule with a trailing slash in
the index, which it doesn't find (because it is stored without a trailing
slash). As it doesn't find any index entries inside the submodule it
claims the directory would be empty even though it isn't.
Fix that by searching for the name without a trailing slash and continue
if it is a submodule. Then rename() will move the submodule work tree just
like it moves a file.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a demonstration of how the code would look like; I do
not think it is particularly easier to read than before myself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By rewriting the loop that formats the argv[] in cmd_tar_tree()
function using sq_quote_argv() for code simplicity, the last use of
sq_quote_print() goes away.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The print_value() function in for-each-ref.c prints values to stdout
immediately using {sq|perl|python|tcl}_quote_print(). Change these
lower-level quote functions to instead leave their results in strbuf
so that we can later add post-processing to the results of them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we refuse to make an empty commit, we check whether we
are in a cherry-pick in order to give better advice on how
to proceed. We instruct the user to repeat the commit with
"--allow-empty" to force the commit, or to use "git reset"
to skip it and abort the cherry-pick.
In the case of a single cherry-pick, the distinction between
skipping and aborting is not important, as there is no more
work to be done afterwards. When we are using the sequencer
to cherry pick a series of commits, though, the instruction
is confusing: does it skip this commit, or does it abort the
rest of the cherry-pick?
It does skip, after which the user can continue the
cherry-pick. This is the right thing to be advising the user
to do, but let's make it more clear what will happen, both
by using the word "skip", and by mentioning that the rest of
the sequence can be continued via "cherry-pick --continue"
(whether we skip or take the commit).
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two (not identical) copies of error reporting when
attempting to remove submodules that have their repositories
embedded within them. Add a helper function so that we do not have
to repeat similar error messages with subtly different wording
without a good reason.
Noticed by Jiang Xin.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
Assorted code cleanups and a minor fix.
* sb/misc-fixes:
diff.c: Do not initialize a variable, which gets reassigned anyway.
commit: Fix a memory leak in determine_author_info
daemon.c:handle: Remove unneeded check for null pointer.
Document for interactive git-clean says: "You also could say `c` or
`clean` above as long as the choice is unique". But it's not true,
because only hotkey `c` and full match (`clean`) could work.
Implement partial matching via find_unique function to make the
document right.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an extension of c6807a4 (clone: open a shortcut for
connectivity check - 2013-05-26) to reduce the cost of connectivity
check at clone time, this time with smart http protocol.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just the next line assigns a non-null value to seen.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the deepest part of the callchain for "git push" (and
"git send-pack") to enforce "the old value of the ref must be this,
otherwise fail this push" (aka "compare-and-swap" / "--lockref").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This plugs the push_cas_option data collected by the command line
option parser to the transport system with a new function
apply_push_cas(), which is called after match_push_refs() has
already been called.
At this point, we know which remote we are talking to, and what
remote refs we are going to update, so we can fill in the details
that may have been missing from the command line, such as
(1) what abbreviated refname the user gave us matches the actual
refname at the remote; and
(2) which remote-tracking branch in our local repository to read
the value of the object to expect at the remote.
to populate the old_sha1_expect[] field of each of the remote ref.
As stated in the documentation, the use of remote-tracking branch
as the default is a tentative one, and we may come up with a better
logic as we gain experience.
Still nobody uses this information, which is the topic of the next
patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git push" and "git send-pack" to parse this commnd line
option.
The intended sematics is:
* "--force-with-lease" alone, without specifying the details, will
protect _all_ remote refs that are going to be updated by
requiring their current value to be the same as some reasonable
default, unless otherwise specified;
* "--force-with-lease=refname", without specifying the expected
value, will protect that refname, if it is going to be updated,
by requiring its current value to be the same as some reasonable
default.
* "--force-with-lease=refname:value" will protect that refname, if
it is going to be updated, by requiring its current value to be
the same as the specified value; and
* "--no-force-with-lease" will cancel all the previous --force-with-lease on the
command line.
For now, "some reasonable default" is tentatively defined as "the
value of the remote-tracking branch we have for the ref of the
remote being updated", and it is an error if we do not have such a
remote-tracking branch. But this is known to be fragile, its use is
not yet recommended, and hopefully we will find more reasonable
default as we gain experience with this feature. The manual marks
the feature as experimental unless the expected value is specified
explicitly for this reason.
Because the command line options are parsed _before_ we know which
remote we are pushing to, there needs further processing to the
parsed data after we instantiate the transport object to:
* expand "refname" given by the user to a full refname to be
matched with the list of "struct ref" used in match_push_refs()
and set_ref_status_for_push(); and
* learning the actual local ref that is the remote-tracking branch
for the specified remote ref.
Further, some processing need to be deferred until we find the set
of remote refs and match_push_refs() returns in order to find the
ones that need to be checked after explicit ones have been processed
for "--force-with-lease" (no specific details).
These post-processing will be the topic of the next patch.
This option was originally called "cas" (for "compare and swap"),
the name which nobody liked because it was too technical. The
second attempt called it "lockref" (because it is conceptually like
pushing after taking a lock) but the word "lock" was hated because
it implied that it may reject push by others, which is not the way
this option works. This round calls it "force-with-lease". You
assume you took the lease on the ref when you fetched to decide what
the rebased history should be, and you can push back only if the
lease has not been broken.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Corrects the longstanding sloppiness in the implementation of
name-rev that conflated "we take commit-ish" and "differences
between tags and commits do not matter".
* jc/name-rev-exact-ref:
describe: fix --contains when a tag is given as input
name-rev: differentiate between tags and commits they point at
describe: use argv-array
name-rev: allow converting the exact object name at the tip of a ref
name-ref: factor out name shortening logic from name_ref()
A new command to allow scripts to query the mailmap information.
* es/check-mailmap:
t4203: test check-mailmap command invocation
builtin: add git-check-mailmap command
Add "interactive" mode to "git clean".
The early part to refactor relative path related helper functions
looked sensible.
* jx/clean-interactive:
test: run testcases with POSIX absolute paths on Windows
test: add t7301 for git-clean--interactive
git-clean: add documentation for interactive git-clean
git-clean: add ask each interactive action
git-clean: add select by numbers interactive action
git-clean: add filter by pattern interactive action
git-clean: use a git-add-interactive compatible UI
git-clean: add colors to interactive git-clean
git-clean: show items of del_list in columns
git-clean: add support for -i/--interactive
git-clean: refactor git-clean into two phases
write_name{_quoted_relative,}(): remove redundant parameters
quote_path_relative(): remove redundant parameter
quote.c: substitute path_relative with relative_path
path.c: refactor relative_path(), not only strip prefix
test: add test cases for relative_path
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
Use the function attributes extension to catch mistakes in use of
our own variadic functions that use NULL sentinel at the end
(i.e. like execl(3)) and format strings (i.e. like printf(3)).
* jk/gcc-function-attributes:
Add the LAST_ARG_MUST_BE_NULL macro
wt-status: use "format" function attribute for status_printf
use "sentinel" function attribute for variadic lists
add missing "format" function attributes
The "--head" option to "git show-ref" was only to add "HEAD" to the
list of candidate refs to be filtered by the usual rules
(e.g. "--heads" that only show refs under refs/heads). Change the
meaning of the option to always show "HEAD" regardless of what
filtering will be applied to any other ref (this is a backward
incompatible change, so I may need to add an entry to the Release
Notes).
* db/show-ref-head:
show-ref: make --head always show the HEAD ref
A finishing touch to fix breakage to "add -e" caused by defaulting
ui.color to "auto".
* mm/color-auto-default:
git add -e: Explicitly specify that patch should have no color
The "--local-env-vars" and "--resolve-git-dir" arguments to
git-rev-parse are currently only handled if they appear first on the
command line (in the case of "--local-env-vars", only if it is the only
argument). While it may not make sense to use these options when any
others are specified, there is no reason for this restriction and it
might confuse users if these arguments appear to be ignored.
There is no need for any documentation change here as the restrictions
on these options are not documented.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name marc.theaimsgroup.com is no longer active, and has
migrated to marc.info.
Signed-off-by: Ondřej Bílka <neleai@seznam.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 4c7f1819 (make color.ui default to 'auto', 2013-06-10), the
patch file to be edited during 'git add -e' receives all the color
codes. This is because diffopt.use_color defaults to -1, which
causes want_color to now return 'auto'.
By explicitly setting use_color to 0, we can ensure the diff output
has no color codes in it.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable len is set to
len = strchrnul(line, '\n') - line;
unconditionally 9 lines later, hence we can remove the call to strlen.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sentinel function attribute is not understood by versions of
the gcc compiler prior to v4.0. At present, for earlier versions
of gcc, the build issues 108 warnings related to the unknown
attribute. In order to suppress the warnings, we conditionally
define the LAST_ARG_MUST_BE_NULL macro to provide the sentinel attribute
for gcc v4.0 and newer.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without "git fetch --prune", remote-tracking branches for a branch
the other side already has removed will stay forever. Some people
want to always run "git fetch --prune".
To accommodate users who want to either prune always or when fetching
from a particular remote, add two new configuration variables
"fetch.prune" and "remote.<name>.prune":
- "fetch.prune" allows to enable prune for all fetch operations.
- "remote.<name>.prune" allows to change the behaviour per remote.
The latter will naturally override the former, and the --[no-]prune
option from the command line will override the configured default.
Since --prune is a potentially destructive operation (Git doesn't
keep reflogs for deleted references yet), we don't want to prune
without users consent, so this configuration will not be on by
default.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" takes a commit and gives it a name based on tags in
its neighbourhood. The command does take a commit-ish but when
given a tag that points at a commit, it should dereference the tag
before computing the name for the commit.
As the whole processing is internally delegated to name-rev, if we
unwrap tags down to the underlying commit when invoking name-rev, it
will make the name-rev issue an error message based on the unwrapped
object name (i.e. either 40-hex object name, or "$tag^0") that is
different from what the end-user gave to the command when the commit
cannot be described. Introduce an internal option --peel-tag to the
name-rev to tell it to unwrap a tag in its input from the command
line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev --stdin" has been fixed to convert an object name that
points at a tag to a refname of the tag. The codepath to handle its
command line arguments, however, fed the commit that the tag points
at to the underlying naming machinery.
With this fix, you will get this:
$ git name-rev --refs=tags/\* --name-only $(git rev-parse v1.8.3 v1.8.3^0)
v1.8.3
v1.8.3^0
which is the same as what you would get from the fixed "--stdin" variant:
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --refs=tags/\* --name-only
v1.8.3
v1.8.3^0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch-check=<format>" is added, primarily to allow
on-disk footprint of objects in packfiles (often they are a lot
smaller than their true size, when expressed as deltas) to be
reported.
* jk/in-pack-size-measurement:
pack-revindex: radix-sort the revindex
pack-revindex: use unsigned to store number of objects
cat-file: split --batch input lines on whitespace
cat-file: add %(objectsize:disk) format atom
cat-file: add --batch-check=<format>
cat-file: refactor --batch option parsing
cat-file: teach --batch to stream blob objects
t1006: modernize output comparisons
teach sha1_object_info_extended a "disk_size" query
zero-initialize object_info structs
"git clone -s/-l" is a filesystem level copy and does not offer any
protection against source repository being corrupt. While the
connectivity validation checks commits and trees being readable, it
made the otherwise instantaneous local modes of clone much more
expensive, without protecting blob data from bitflips.
* jk/maint-clone-shared-no-connectivity-validation:
clone: drop connectivity check for local clones
The existing description reads as if it somehow applies a filter.
Change it to explain that it is merely about the ordering.
Message-proposed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only four (with some generous rounding) instances in the
current source code where we speak of "subproject" instead of
"submodule". They are as follows:
* one error message in git-apply and two in entry.c
* the patch format for submodule changes
The latter was introduced in 0478675 (Expose subprojects as special
files to "git diff" machinery, 2007-04-15), apparently before the
terminology was settled. We can of course not change the patch
format.
Let's at least change the error messages to consistently call them
"submodule".
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The docs seem to say that doing
git show-ref --head --tags
would show both the HEAD ref and all the tag refs. However, doing
both --head and either of --tags or --heads would filter out the HEAD
ref.
Also update the documentation to describe the new behavior and add
tests for the show-ref command.
[jc: Doug did proofread the tests, but it was done by me and bugs in
it are mine].
Signed-off-by: Doug Bell <madcityzen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is essentially no-op. It helps catching new use of this
field though. This field is introduced as an intermediate step for the
pathspec conversion and will be removed eventually. At this stage no
more access sites should be introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_pathspec_depth was created to replace match_pathspec (see
61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took
more than two years, but the replacement finally happens :-)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move free_pathspec() to pathspec.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code now takes advantage of nowildcard_len field.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This passes the pathspec, more or less unmodified, to
git-add--interactive. The command itself does not process pathspec. It
simply passes the pathspec to other builtin commands. So if all those
commands support pathspec, we're good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.
Cc: Adam Spiers <git@adamspiers.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GUARD_PATHSPEC() marks pathspec-sensitive code, basically all those
that touch anything in 'struct pathspec' except fields "nr" and
"original". GUARD_PATHSPEC() is not supposed to fail. It's mainly to
help the designers catch unsupported codepaths.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_pathspec_depth() and tree_entry_interesting() check max_depth
field in order to support "git grep --max-depth". The feature
activation is tied to "recursive" field, which led to some unwanted
activation, e.g. 5c8eeb8 (diff-index: enable recursive pathspec
matching in unpack_trees - 2012-01-15).
This patch decouples the activation from "recursive" field, puts it in
"magic" field instead. This makes sure that only "git grep" can
activate this feature. And because parse_pathspec knows when the
feature is not used, it does not need to sort pathspec (required for
max_depth to work correctly). A small win for non-grep cases.
Even though a new magic flag is introduced, no magic syntax is. The
magic can be only enabled by parse_pathspec() caller. We might someday
want to support ":(maxdepth:10)src." It all depends on actual use
cases.
max_depth feature cannot be enabled via init_pathspec() anymore. But
that's ok because init_pathspec() is on its way to /dev/null.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These call sites follow the pattern:
paths = get_pathspec(prefix, argv);
init_pathspec(&pathspec, paths);
which can be converted into a single parse_pathspec() call.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because free_pathspec wants to free "items" pointer in the pathspec
structure, a simple structure assignment is not enough if you want to
copy an existing pathspec into another. Freeing the original will
damage the copy unless a deep copy is made.
Note that the strings in pathspec->items->match and the array
pathspec->raw[] are still shared between the original and the copy.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" parsed patches that add new files, generated by programs
other than Git, incorrectly. This is an old breakage in v1.7.11.
* tr/maint-apply-non-git-patch-parsefix:
apply: carefully strdup a possibly-NULL name
"git format-patch" learned "--from[=whom]" option, which sets the
"From: " header to the specified person (or the person who runs the
command, if "=whom" part is missing) and move the original author
information to an in-body From: header as necessary.
* jk/format-patch-from:
teach format-patch to place other authors into in-body "From"
pretty.c: drop const-ness from pretty_print_context
The configuration variable "merge.ff" was cleary a tri-state to
choose one from "favor fast-forward when possible", "always create
a merge even when the history could fast-forward" and "do not
create any merge, only update when the history fast-forwards", but
the command line parser did not implement the usual convention of
"last one wins, and command line overrides the configuration"
correctly.
* mv/merge-ff-tristate:
merge: handle --ff/--no-ff/--ff-only as a tri-state option
The date variable is assigned new memory via xmemdupz and 2 lines later
it is assigned new memory again via xmalloc, but the first assignment
is never freed nor used.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce command check-mailmap, similar to check-attr and check-ignore,
which allows direct testing of .mailmap configuration.
As plumbing accessible to scripts and other porcelain, check-mailmap
publishes the stable, well-tested .mailmap functionality employed by
built-in Git commands. Consequently, script authors need not
re-implement .mailmap functionality manually, thus avoiding potential
quirks and behavioral differences.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --format=" did not honor i18n.logoutputencoding configuration
and this attempts to fix it.
* as/log-output-encoding-in-user-format:
t4205 (log-pretty-formats): avoid using `sed`
t6006 (rev-list-format): add tests for "%b" and "%s" for the case i18n.commitEncoding is not set
t4205, t6006, t7102: make functions better readable
t4205 (log-pretty-formats): revert back single quotes
t4041, t4205, t6006, t7102: use iso8859-1 rather than iso-8859-1
t4205: replace .\+ with ..* in sed commands
pretty: --format output should honor logOutputEncoding
pretty: Add failing tests: --format output should honor logOutputEncoding
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
t7102 (reset): don't hardcode SHA-1 in expected outputs
t6006 (rev-list-format): don't hardcode SHA-1 in expected outputs
Each caller of sha1_object_info_extended sets up an
object_info struct to tell the function which elements of
the object it wants to get. Until now, getting the type of
the object has always been required (and it is returned via
the return type rather than a pointer in object_info).
This can involve actually opening a loose object file to
determine its type, or following delta chains to determine a
packed file's base type. These effects produce a measurable
slow-down when doing a "cat-file --batch-check" that does
not include %(objecttype).
This patch adds a "typep" query to struct object_info, so
that it can be optionally queried just like size and
disk_size. As a result, the return type of the function is
no longer the object type, but rather 0/-1 for success/error.
As there are only three callers total, we just fix up each
caller rather than keep a compatibility wrapper:
1. The simpler sha1_object_info wrapper continues to
always ask for and return the type field.
2. The istream_source function wants to know the type, and
so always asks for it.
3. The cat-file batch code asks for the type only when
%(objecttype) is part of the format string.
On linux.git, the best-of-five for running:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectsize:disk)'
on a fully packed repository goes from:
real 0m8.680s
user 0m8.160s
sys 0m0.512s
to:
real 0m7.205s
user 0m6.580s
sys 0m0.608s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common use of "cat-file --batch-check" is to feed a list
of objects from "rev-list --objects" or a similar command.
In this instance, all of our input objects are 40-byte sha1
ids. However, cat-file has always allowed arbitrary revision
specifiers, and feeds the result to get_sha1().
Fortunately, get_sha1() recognizes a 40-byte sha1 before
doing any hard work trying to look up refs, meaning this
scenario should end up spending very little time converting
the input into an object sha1. However, since 798c35f
(get_sha1: warn about full or short object names that look
like refs, 2013-05-29), when we encounter this case, we
spend the extra effort to do a refname lookup anyway, just
to print a warning. This is further exacerbated by ca91993
(get_packed_ref_cache: reload packed-refs file when it
changes, 2013-06-20), which makes individual ref lookup more
expensive by requiring a stat() of the packed-refs file for
each missing ref.
With no patches, this is the time it takes to run:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectname)' <objects
on the linux.git repository:
real 1m13.494s
user 0m25.924s
sys 0m47.532s
If we revert ca91993, the packed-refs up-to-date check, it
gets a little better:
real 0m54.697s
user 0m21.692s
sys 0m32.916s
but we are still spending quite a bit of time on ref lookup
(and we would not want to revert that patch, anyway, which
has correctness issues). If we revert 798c35f, disabling
the warning entirely, we get a much more reasonable time:
real 0m7.452s
user 0m6.836s
sys 0m0.608s
This patch does the moral equivalent of this final case (and
gets similar speedups). We introduce a global flag that
callers of get_sha1() can use to avoid paying the price for
the warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to read configuration values directly from git's
database. For example it is useful for reading to be checked out
.gitmodules files directly from the database.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we get an input line to --batch or --batch-check that
looks like "HEAD foo bar", we will currently feed the whole
thing to get_sha1(). This means that to use --batch-check
with `rev-list --objects`, one must pre-process the input,
like:
git rev-list --objects HEAD |
cut -d' ' -f1 |
git cat-file --batch-check
Besides being more typing and slightly less efficient to
invoke `cut`, the result loses information: we no longer
know which path each object was found at.
This patch teaches cat-file to split input lines at the
first whitespace. Everything to the left of the whitespace
is considered an object name, and everything to the right is
made available as the %(reset) atom. So you can now do:
git rev-list --objects HEAD |
git cat-file --batch-check='%(objectsize) %(rest)'
to collect object sizes at particular paths.
Even if %(rest) is not used, we always do the whitespace
split (which means you can simply eliminate the `cut`
command from the first example above).
This whitespace split is backwards compatible for any
reasonable input. Object names cannot contain spaces, so any
input with spaces would have resulted in a "missing" line.
The only input hurt is if somebody really expected input of
the form "HEAD is a fine-looking ref!" to fail; it will now
parse HEAD, and make "is a fine-looking ref!" available as
%(rest).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This atom is just like %(objectsize), except that it shows
the on-disk size of the object rather than the object's true
size. In other words, it makes the "disk_size" query of
sha1_object_info_extended available via the command-line.
This can be used for rough attribution of disk usage to
particular refs, though see the caveats in the
documentation.
This patch does not include any tests, as the exact numbers
returned are volatile and subject to zlib and packing
decisions. We cannot even reliably guarantee that the
on-disk size is smaller than the object content (though in
general this should be the case for non-trivial objects).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `cat-file --batch-check` command can be used to quickly
get information about a large number of objects. However, it
provides a fixed set of information.
This patch adds an optional <format> option to --batch-check
to allow a caller to specify which items they are interested
in, and in which order to output them. This is not very
exciting for now, since we provide the same limited set that
you could already get. However, it opens the door to adding
new format items in the future without breaking backwards
compatibility (or forcing callers to pay the cost to
calculate uninteresting items).
Since the --batch option shares code with --batch-check, it
receives the same feature, though it is less likely to be of
interest there.
The format atom names are chosen to match their counterparts
in for-each-ref. Though we do not (yet) share any code with
for-each-ref's formatter, this keeps the interface as
consistent as possible, and may help later on if the
implementations are unified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless a command has separate --nul-terminated-{input,output}
options, the --nul-terminated-records (-z) option should apply
to both input and output for consistency. The caller knows that its
input paths may need to be protected for LF, and the program shows
these problematic paths to its output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless a command has separate --nul-terminated-{input,output}
options, the --nul-terminated-records (-z) option should apply
to both input and output for consistency. The caller knows that its
input paths may need to be protected for LF, and the program shows
these problematic paths to its output.
The code already did the right thing. Only the help text needs
fixing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status/commit: make sure --porcelain is not affected by user-facing config
commit: make it work with status.short
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
Earlier remote.pushdefault (and per-branch branch.*.pushremote)
were introduced as an additional mechanism to choose what
repository to push into when "git push" did not say it from the
command line, to help people who push to a repository that is
different from where they fetch from. This attempts to finish that
topic by teaching the default mechanism to choose branch in the
remote repository to be updated by such a push.
The 'current', 'matching' and 'nothing' modes (specified by the
push.default configuration variable) extend to such a "triangular"
workflow naturally, but 'upstream' and 'simple' have to be updated.
. 'upstream' is about pushing back to update the branch in the
remote repository that the current branch fetches from and
integrates with, it errors out in a triangular workflow.
. 'simple' is meant to help new people by avoiding mistakes, and
will be the safe default in Git 2.0.
In a non-triangular workflow, it will continue to act as a cross
between 'upstream' and 'current' in that it pushes to the current
branch's @{upstream} only when it is set to the same name as the
current branch (e.g. your 'master' forks from the 'master' from
the central repository).
In a triangular workflow, this series tentatively defines it as
the same as 'current', but we may have to tighten it to avoid
surprises in some way.
* jc/triangle-push-fixup:
t/t5528-push-default: test pushdefault workflows
t/t5528-push-default: generalize test_push_*
push: change `simple` to accommodate triangular workflows
config doc: rewrite push.default section
t/t5528-push-default: remove redundant test_config lines
We currently use an int to tell us whether --batch parsing
is on, and if so, whether we should print the full object
contents. Let's instead factor this into a struct, filled in
by callback, which will make further batch-related options
easy to add.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The regular "git cat-file -p" and "git cat-file blob" code
paths already learned to stream large blobs. Let's do the
same here.
Note that this means we look up the type and size before
making a decision of whether to load the object into memory
or stream (just like the "-p" code path does). That can lead
to extra work, but it should be dwarfed by the cost of
actually accessing the object itself. In my measurements,
there was a 1-2% slowdown when using "--batch" on a large
number of objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attribute can help gcc notice when callers forget to
add a NULL sentinel to the end of the function. This is our
first use of the sentinel attribute, but we shouldn't need
to #ifdef for other compilers, as __attribute__ is already a
no-op on non-gcc-compatible compilers.
Suggested-by: Bert Wesarg <bert.wesarg@googlemail.com>
More-Spots-Found-By: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a hand allocated args[] array, use argv-array API
to manage the dynamically created list of arguments when invoking
name-rev.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev" is supposed to convert given object names into
strings that name the same objects based on refs, that can be fed to
"git rev-parse" to get the same object names back, so the output for
the commit object v1.8.3^0 (i.e. the commit tagged as v1.8.3)
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --stdin
8af06057d0c31a24e8737ae846ac2e116e8bafb9
edca415256 (tags/v1.8.3^0)
has to have "^0" at the end, as "edca41" is a commit, not the tag
that references it. But we do not get anything for the tag object
(8af0605) itself.
This is because the command however did not bother to see if the
object is at the tip of some ref, and failed to convert a tag
object.
Teach it to show this instead:
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --stdin
8af06057d0c31a24e8737ae846ac2e116e8bafb9 (tags/v1.8.3)
edca415256 (tags/v1.8.3^0)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line parser of "git push" for "--tags", "--delete", and
"--thin" options still used outdated OPT_BOOLEAN. Because these
options do not give escalating levels when given multiple times,
they should use OPT_BOOL.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of "struct ref" in "cache.h", a header file so
central to the system, always confused me. This structure is not
about the local ref used by sha1-name API to name local objects.
It is what refspecs are expanded into, after finding out what refs
the other side has, to define what refs are updated after object
transfer succeeds to what values. It belongs to "remote.h" together
with "struct refspec".
While we are at it, also move the types and functions related to the
Git transport connection to a new header file connect.h
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0433ad1 (clone: run check_everything_connected,
2013-03-25) added the same connectivity check to clone that
we use for fetching. The intent was to provide enough safety
checks that "git clone git://..." could be counted on to
detect bit errors and other repo corruption, and not
silently propagate them to the clone.
For local clones, this turns out to be a bad idea, for two
reasons:
1. Local clones use hard linking (or even shared object
stores), and so complete far more quickly. The time
spent on the connectivity check is therefore
proportionally much more painful.
2. Local clones do not actually meet our safety guarantee
anyway. The connectivity check makes sure we have all
of the objects we claim to, but it does not check for
bit errors. We will notice bit errors in commits and
trees, but we do not load blob objects at all. Whereas
over the pack transport, we actually recompute the sha1
of each object in the incoming packfile; bit errors
change the sha1 of the object, which is then caught by
the connectivity check.
This patch drops the connectivity check in the local case.
Note that we have to revert the changes from 0433ad1 to
t5710, as we no longer notice the corruption during clone.
We could go a step further and provide a "verify even local
clones" option, but it is probably not worthwhile. You can
already spell that as "cd foo.git && git fsck && git clone ."
or as "git clone --no-local foo.git".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With some workflows, it is more suitable to rebase on top of remote
changes when a push does not fast-forward. Change the advice messages
in git-push to suggest that a user "integrate the remote changes"
instead of "merge the remote changes" to make this slightly clearer.
Also change the suggested 'git pull' to 'git pull ...' to hint to users
that they may want to add other parameters.
Suggested-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format-patch generates emails with the "From" address set to the
author of each patch. If you are going to send the emails, however,
you would want to replace the author identity with yours (if they
are not the same), and bump the author identity to an in-body
header.
Normally this is handled by git-send-email, which does the
transformation before sending out the emails. However, some
workflows may not use send-email (e.g., imap-send, or a custom
script which feeds the mbox to a non-git MUA). They could each
implement this feature themselves, but getting it right is
non-trivial (one must canonicalize the identities by reversing any
RFC2047 encoding or RFC822 quoting of the headers, which has caused
many bugs in send-email over the years).
This patch takes a different approach: it teaches format-patch a
"--from" option which handles the ident check and in-body header
while it is writing out the email. It's much simpler to do at this
level (because we haven't done any quoting yet), and any workflow
based on format-patch can easily turn it on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three options mean "favor fast-forwarding when possible,
without creating an unnecessary merge", "never fast-forward and
always create a merge commit even when the commit being merged is a
strict descendant", and "we do not want to create any merge commit;
update only when the merged commit is a strict descendant".
They are "pick one out of these three possibilities" options, and
correspond to "merge.ff" configuration that is tri-state (yes, no
and only).
However, the implementation did not follow the usual convention for
the command line options (later one wins, and command line overrides
what is in the configuration).
Fix this by consolidating two variables (fast_forward_only and
allow_fast_forward) used in the implementation into one enum that
can take one of the three possible values.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
"git pack-refs" that races with new ref creation or deletion have
been susceptible to lossage of refs under right conditions, which
has been tightened up.
* mh/ref-races:
for_each_ref: load all loose refs before packed refs
get_packed_ref_cache: reload packed-refs file when it changes
add a stat_validity struct
Extract a struct stat_data from cache_entry
packed_ref_cache: increment refcount when locked
do_for_each_entry(): increment the packed refs cache refcount
refs: manage lifetime of packed refs cache via reference counting
refs: implement simple transactions for the packed-refs file
refs: wrap the packed refs cache in a level of indirection
pack_refs(): split creation of packed refs and entry writing
repack_without_ref(): split list curation and entry writing
"git name-rev --refs=tags/v*" were forbidden, which was a bit
inconvenient (you had to give a pattern to match refs fully, like
--refs=refs/tags/v*).
* nk/name-rev-abbreviated-refs:
name-rev: allow to specify a subpath for --refs option
Allow various subcommands of "git submodule" to be run not from the
top of the working tree of the superproject.
* jk/submodule-subdirectory-ok:
submodule: drop the top-level requirement
rev-parse: add --prefix option
submodule: show full path in error message
t7403: add missing && chaining
t7403: modernize style
t7401: make indentation consistent
Cloning with "git clone --depth N" while fetch.fsckobjects (or
transfer.fsckobjects) is set to true did not tell the cut-off points
of the shallow history to the process that validates the objects and
the history received, causing the validation to fail.
* 'nd/clone-connectivity-shortcut' (early part):
fetch-pack: prepare updated shallow file before fetching the pack
clone: let the user know when check_everything_connected is run
* rr/push-head:
push: make push.default = current use resolved HEAD
push: fail early with detached HEAD and current
push: factor out the detached HEAD error message
* jh/checkout-auto-tracking:
glossary: Update and rephrase the definition of a remote-tracking branch
branch.c: Validate tracking branches with refspecs instead of refs/remotes/*
t9114.2: Don't use --track option against "svn-remote"-tracking branches
t7201.24: Add refspec to keep --track working
t3200.39: tracking setup should fail if there is no matching refspec.
checkout: Use remote refspecs when DWIMming tracking branches
t2024: Show failure to use refspec when DWIMming remote branch names
t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'
Plug a small leak in checkout.
* bc/checkout-tracking-name-plug-leak:
t/t9802: explicitly name the upstream branch to use as a base
builtin/checkout.c: don't leak memory in check_tracking_name
Fix for the codepath to parse patches that add new files, generated
by programs other than Git. THis is an old breakage in v1.7.11 and
will need to be merged down to the maintanance tracks.
* tr/maint-apply-non-git-patch-parsefix:
apply: carefully strdup a possibly-NULL name
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new action for interactive git-clean: ask each. It's just like
the "rm -i" command, that the user must confirm one by one for each
file or directory to be cleaned.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Draw a multiple choice menu using `list_and_choose` to select items
to be deleted by numbers.
User can input:
* 1,5-7 : select 1,5,6,7 items to be deleted
* * : select all items to be deleted
* -* : unselect all, nothing will be deleted
* : (empty) finish selecting, and return back to main menu
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new action for interactive git-clean: filter by pattern. When the
user chooses this action, user can input space-separated patterns (the
same syntax as gitignore), and each clean candidate that matches with
one of the patterns will be excluded from cleaning. When the user feels
it's OK, presses ENTER and backs to the confirmation dialog.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite menu using a new method `list_and_choose`, which is borrowed
from `git-add--interactive.perl`. We will use this framework to add
new actions for interactive git-clean later.
Please NOTE:
* Method `list_and_choose` return an array of integers, and
* it is up to you to free the allocated memory of the array.
* The array ends with EOF.
* If user pressed CTRL-D (i.e. EOF), no selection returned.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Show header, help, error messages, and prompt in colors for interactive
git-clean. Re-use config variables, such as "color.interactive" and
"color.interactive.<slot>" for command `git-add--interactive`.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Comments-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are lots of items to be cleaned, it is hard to see them all
in one screen. Show them in columns will solve this problem.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Comments-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Show what would be done and the user must confirm before actually
cleaning.
Would remove ...
Would remove ...
Would remove ...
Remove [y/n]?
Press "y" to start cleaning, and press "n" if you want to abort.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before introducing interactive git-clean, refactor git-clean operations
into two phases:
* hold cleaning items in del_list,
* and remove them in a separate loop at the end.
We will introduce interactive git-clean between the two phases. The
interactive git-clean will show what would be done and must confirm
before do real cleaning.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After substitute path_relative() in quote.c with relative_path()
from path.c, parameters (such as len and prefix_len) are redundant
in function write_name() and write_name_quoted_relative(). The
callers have already been audited that the strings they pass are
properly NUL terminated and the length they give are the length of
the string (or -1 that asks the length to be counted by the callee).
Remove these now-redundant parameters.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
quote_path_relative() used to take a counted string as its parameter
(the string to be quoted). With an earlier change, it now uses
relative_path() that does not take a counted string, and we have
been passing only the pointer to the string since then.
Remove the length parameter from quote_path_relative() to show that
this parameter was redundant. All the changed lines show that the
caller passed either -1 (to ask the function run strlen() on the
string), or the length of the string, so the earlier conversion was
safe.
All the callers of quote_path_relative() that used to take counted string
have been audited to make sure that they are passing length of the actual
string (or -1 to ask the callee run strlen())
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Substitute the function path_relative in quote.c with the function
relative_path. Function relative_path can be treated as an enhanced
and more robust version of path_relative.
Outputs of path_relative and it's replacement (relative_path) are the
same for the following cases:
path prefix output of path_relative output of relative_path
======== ========= ======================= =======================
/a/b/c/ /a/b/ c/ c/
/a/b/c /a/b/ c c
/a/ /a/b/ ../ ../
/ /a/b/ ../../ ../../
/a/c /a/b/ ../c ../c
/x/y /a/b/ ../../x/y ../../x/y
a/b/c/ a/b/ c/ c/
a/ a/b/ ../ ../
x/y a/b/ ../../x/y ../../x/y
/a/b (empty) /a/b /a/b
/a/b (null) /a/b /a/b
a/b (empty) a/b a/b
a/b (null) a/b a/b
But if both of the path and the prefix are the same, or the returned
relative path should be the current directory, the outputs of both
functions are different. Function relative_path returns "./", while
function path_relative returns empty string.
path prefix output of path_relative output of relative_path
======== ========= ======================= =======================
/a/b/ /a/b/ (empty) ./
a/b/ a/b/ (empty) ./
(empty) (null) (empty) ./
(empty) (empty) (empty) ./
But the callers of path_relative can handle such cases, or never
encounter this issue at all, because:
* In function quote_path_relative, if the output of path_relative is
empty, append "./" to it, like:
if (!out->len)
strbuf_addstr(out, "./");
* Another caller is write_name_quoted_relative, which is only used
by builtin/ls-files.c. git-ls-files only show files, so path of
files will never be identical with the prefix of a directory.
The following differences show that path_relative does not handle
extra slashes properly:
path prefix output of path_relative output of relative_path
======== ========= ======================= =======================
/a//b//c/ //a/b// ../../../../a//b//c/ c/
a/b//c a//b ../b//c c
And if prefix has no trailing slash, path_relative does not work
properly either. But since prefix always has a trailing slash, it's
not a problem.
path prefix output of path_relative output of relative_path
======== ========= ======================= =======================
/a/b/c/ /a/b b/c/ c/
/a/b /a/b b ./
/a/b/ /a/b b/ ./
/a /a/b/ ../../a ../
a/b/c/ a/b b/c/ c/
a/b/ a/b b/ ./
a a/b ../a ../
x/y a/b/ ../x/y ../../x/y
a/c a/b c ../c
/a/ /a/b (empty) ../
(empty) /a/b ../../ ./
One tricky part in this conversion is write_name() function in
ls-files.c. It takes a counted string, <name, len>, that is to be
made relative to <prefix, prefix_len> and then quoted. Because
write_name_quoted_relative() still takes these two parameters as
counted string, but ignores the count and treat these two as
NUL-terminated strings, this conversion needs to be audited for its
callers:
- For <name, len>, all three callers of write_name() passes a
NUL-terminated string and its true length, so this patch makes
"len" unused.
- For <prefix, prefix_len>, prefix could be a string that is longer
than empty while prefix_len could be 0 when "--full-name" option
is used. This is fixed by checking prefix_len in write_name()
and calling write_name_quoted_relative() with NULL when
prefix_len is set to 0. Again, this makes "prefix_len" given to
write_name_quoted_relative() unused, without introducing a bug.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a single message followed by list of paths from "git rm" to
report multiple paths that cannot be removed.
* mm/rm-coalesce-errors:
rm: introduce advice.rmHints to shorten messages
rm: better error message on failure for multiple files
Make it possible to call into copy-notes API from the sequencer code.
* jh/libify-note-handling:
Move create_notes_commit() from notes-merge.c into notes-utils.c
Move copy_note_for_rewrite + friends from builtin/notes.c to notes-utils.c
finish_copy_notes_for_rewrite(): Let caller provide commit message
The recent addition of status.branch started affecting what is shown
when "git status --porcelain" is run by mistake. Identify the
configuration items that should be ignored under "--porcelain"
option, introduce a "deferred config" mechanism to keep the values
read from the configuration, and decide what value to use only after
we read both from configuration and command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "status.short" set, it is now impossible to commit with
status.short set, because it acts like "git commit --short", and it
is impossible to differentiate between a status_format set by the
command-line option parser versus that set by the config parser.
To alleviate this problem, clear status_format as soon as the config
parser has finished its work.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always run 'git status -s'.
The configuration variable status.short allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
