The --include-untracked option acts like the normal "git stash save" but
also adds all untracked files in the working directory to the stash and then
calls "git clean --force --quiet" to restore the working directory to a
pristine state.
This is useful for projects that need to run release scripts. With this
option, the release scripts can be from the main working directory so one
does not have to maintain a "clean" directory in parallel just for
releasing. Basically the work-flow becomes:
$ git tag release-1.0
$ git stash --include-untracked
$ make release
$ git clean -f
$ git stash pop
"git stash" alone is not enough in this case--it leaves untracked files
lying around that might mess up a release process that expects everything to
be very clean or might let a release succeed that should actually fail (due
to a new source file being created that hasn't been committed yet).
Signed-off-by: David Caldwell <david@porkrind.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the say/die eval_gettext messages in the drop_stash
function. Since making these translatable would result in a long line
I've wrapped this into two lines.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "unknown option for 'stash save'" message that's shown
on:
$ git stash save --blah-blah
error: unknown option for 'stash save': --blah-blah
To provide a message, use git stash save -- '--blah-blah'
Usage: git stash list [<options>]
In a translation the second line should be aligned with the first
one. I've added a TRANSLATORS comment to indicate this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize a messages that used the $1 variable. Since it's subroutine
local we have to provide an alias for it for eval_gettext.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize messages that used the $* variable. Since it's subroutine
local we have to provide an alias for it for eval_gettext.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't assume one comes after the other on the command line. Use a
three-state variable to track and check its value accordingly.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before we apply a stash, we make sure there are no changes
in the worktree that are not in the index. This check dates
back to the original git-stash.sh, and is presumably
intended to prevent changes in the working tree from being
accidentally lost during the merge.
However, this check has two problems:
1. It is overly restrictive. If my stash changes only file
"foo", but "bar" is dirty in the working tree, it will
prevent us from applying the stash.
2. It is redundant. We don't touch the working tree at all
until we actually call merge-recursive. But it has its
own (much more accurate) checks to avoid losing working
tree data, and will abort the merge with a nicer
message telling us which paths were problems.
So we can simply drop the check entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, "git rev-parse ref@{9999999}" did not
generate an error. Therefore when we got an invalid stash
reference in "stash apply", we could end up not noticing
until quite late. Commit b0f0ecd (detached-stash: work
around git rev-parse failure to detect bad log refs,
2010-08-21) handled this by checking for the "Log for stash
has only %d entries" warning on stderr when we validated the
ref.
A few days later, e6eedc3 (rev-parse: exit with non-zero
status if ref@{n} is not valid., 2010-08-24) fixed the
original issue. That made the extra stderr test superfluous,
but also introduced a new bug. Now the early call to:
git rev-parse --symbolic "$@"
fails, but we don't notice the exit code. Worse, its empty
output means we think the user didn't provide us a ref, and
we try to apply stash@{0}.
This patch checks the rev-parse exit code and fails early in
the revision parsing process. We can also get rid of the
stderr test; as a bonus, this means that "stash apply" can
now run under GIT_TRACE=1 properly.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash create' must operate with a temporary index. For this purpose,
it used 'cp -p' to create a copy. -p is needed to preserve the timestamp
of the index file. Now Jakob Pfender reported a certain combination of
a Linux NFS client, OpenBSD NFS server, and cp implementation where this
operation failed.
Luckily, the first operation in git-stash after copying the index is to
call 'git read-tree'. Therefore, use --index-output instead of 'cp -p'
to write the copy of the index.
--index-output requires that the specified file is on the same volume as
the source index, so that the lock file can be rename()d. For this reason,
the name of the temporary index is constructed in a way different from the
other temporary files. The code path of 'stash -p' also needs a temporary
index, but we do not use the new name because it does not depend on the
same precondition as --index-output.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The * was inside the quotes, so that the pattern was never expanded and the
temporary files were never removed. As a consequence, 'stash -p' left a
.git-stash-*-patch file in $GIT_DIR. Other code paths did not leave files
behind because they removed the temporary file themselves, at least in
non-error paths.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status shows modified paths relative to current directory, so it's
possible to copy&paste them directly, even if you're in a subdirectory.
But "git stash apply" always shows status from root of git repository.
This is misleading because you can't use the paths without modifications.
This is caused by changing directory to root of repository at the
beginning of git stash.
This patch makes git stash show status relative to current directory.
Instead of removing the "cd to toplevel", which would affect whole
script and might have other side-effects, the fix is to change directory
temporarily back to original dir just before displaying status.
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch simplifies Brian's fix for the recent regression by:
* eliminating the extra loop
* eliminating use of git rev-parse for parsing flags
* making use of the for opt idiom for the retained loop
* eliminating the redundant -- case
The patch has been tested with the tests in current maint.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash branch <branch> <stash>" started discarding the stash
when the branch creation fails. It should have kept the stash
intact when aborting.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit refactors git stash show to make use of the assert_stash_like function.
git show now dies if the presented argument is non-stash-like.
Previous behaviour was to tolerate commits that were not even stash-like.
Previously, git stash show would accept stash-like arguments, but
only if there was a stash on the stack.
Now, git stash accepts stash-like arguments always and only fails
if no stash-like argument is specified and there is no stash stack.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git stash branch to tolerate stash-like arguments.
In particular, a stash is only required if an argument isn't specified
and the stash is only dropped if a stash entry reference was
specified or implied.
The implementation has been simplified by taking advantage of
assert_stash_like() and the variables established by
parse_flags_and_rev().
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git stash pop is abstracted into its own implementation function - pop_stash.
The behaviour is changed so that git stash pop fails early if the
the specified stash reference does not exist or does not refer to
an extant entry in the reflog of the reference stash.
This fixes the case where the apply succeeds, but the drop fails.
Previously this caused caused git stash pop to exit with a non-zero exit code
and a dirty tree.
Now, git stash pop fails with a non-zero exit code, but the working
tree is not modified.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git stash drop would fail noisily while executing git reflog
delete if the specified revision was not a stash reference.
Now, git stash drop fails with an error message which more precisely
indicates the reason for failure.
Furthermore, git stash drop will now fail with a non-zero status code
if stash@{n} specifies a stash log entry that does not actually exist.
This change in behaviour is achieved by delegating argument parsing
to the common parse_flags_and_rev() function (via a call to
assert_stash_ref).
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of stash_apply() is simplified to take
advantage of the common parsing function parse_flags_and_rev().
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is required because git rev-parse in 1.7.2 does not correctly
indicate invalid log references using a non-zero status code.
We use a proxy for the condition (non-empty error output) as
a substitute. This commit can be reverted when, and if, rev-parse
is fixed to indicate invalid log references with a status code.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce parse_flags_and_revs. This function requires that
there is at most one stash-like revision parameter and
zero or more flags.
It knows how to parse -q,--quiet and --index flags, but leaves
other flags parsed.
Specified revisions are checked to see that they are at
least stash-like (meaning: they look like something created
by git stash save or git stash create).
If this is so, then IS_STASH_LIKE is initialized to a non-empty value.
If the specified revision also looks like a stash log entry reference,
then IS_STASH_REF is initialized to a non-empty value.
References of the form ref@{spec} are required to precisely identify
an individual commit.
If no reference is specified, stash@{0} is assumed.
Once the specified reference is validated to be at least stash_like
an ensemble of derived variables, (w_commit, w_tree, b_commit, etc)
is initialized with a single call to git rev-parse.
Repeated calls to parse_flags_and_rev() avoid repeated calls
to git rev-parse if the specified arguments have already been
parsed.
Subsequent patches in the series modify the existing
git stash subcommands to make use of these functions
as appropriate.
An ensemble of supporting functions that make use of the state
established by parse_flags_and_rev(). These are described below:
The ancillary functions are:
is_stash_like(): which can be used to test
whether a specified commit looks like a commit created with
git stash save or git stash create.
assert_stash_like(): which can be used by
commands that misbehave unless their arguments stash-like.
is_stash_ref(): which checks whether an argument
is valid stash reference(e.g. is of the form
['refs/']stash['@{'something'}])
assert_stash_ref(): which can be used by commands
that misbehave unless their arguments are both stash-like and
refer to valid stash entries.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-stash-orphaned-file:
stash tests: stash can lose data in a file removed from the index
stash: Don't overwrite files that have gone from the index
The use of git add -u in create_stash isn't always complete. In
particular, if a file has been removed from the index but changed in the
work tree it will not be added to the stash's saved work tree tree
object. When stash then resets the work tree to match HEAD, any changes
will be lost.
To be complete, any work tree file which differs from HEAD needs to be
saved, regardless of whether it still appears in the index or not.
This is achieved with a combination of a diff against HEAD and a call to
update-index with an explicit list of paths that have changed.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because log.decorate now shows decorations for --pretty=oneline,
we must explicitly turn it off when scripting. Otherwise,
users with log.decorate set will get cruft like:
$ git stash
Saved working directory and index state WIP on master:
2c1f7f5 (HEAD, master) commit subject
Instead of adding --no-decorate to the log command line,
let's just use the rev-list plumbing interface instead,
which does the right thing.
git-submodule has a similar call. Since it just counts the
commit lines, nothing is broken, but let's switch it, too,
for the sake of consistency and cleanliness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message "fatal: Needed a single revision" is not
very informative.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git stash pop' option parsing used to remove the first argument
in --index mode. At the time this was implemented, this first
argument was always --index. However, since the invention of the -q
option in fcdd0e9 (stash: teach quiet option, 2009-06-17) you can
cause an internal invocation of
git stash drop --index
by running
git stash pop -q --index
which then of course fails because drop doesn't know --index.
To handle this, instead let 'git stash apply' decide what the future
argument to 'drop' should be.
Warning: this means that 'git stash apply' must parse all options that
'drop' can take, and deal with them in the same way. This is
currently true for its only option -q.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash list' had an undocumented limit of 10 stashes, unless other
git-log arguments were specified. This surprised at least one user,
but possibly served to cut the output below a screenful without using
a pager.
Since the last commit, 'git stash list' will fire up a pager according
to the same rules as the 'git log' it calls, so we can drop the limit.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new formats, we can rewrite 'git stash list' in terms of an
appropriate pretty format, instead of hand-editing with sed. This has
the advantage that it obeys the normal settings for git-log, notably
the pager.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The change makes sure a stash (given or default) exists before
checking if the working tree is dirty.
If the default stash is requested, the old message was scary and
included a 'fatal' error from rev-parse:
fatal: Needed a single revision
: no valid stashed state found
It is replaced with a friendlier 'Nothing to apply' error, similar to
'git stash branch'.
If a specific stash is specified, the 'Needed a single revision' errors
from rev-parse are suppressed.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save me from the carpal tunnel syndrome, make 'git stash' accept
the short option '-k' instead of '--keep-index', and for even more
convenience, let's DWIM when this developer forgot to type the 'save'
command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace remaining git-XXX calls with git XXX.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach stash pop, apply, save, and drop to be quiet when told. By using
the quiet option (-q), these actions will be silent unless errors are
encountered.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't redirect stderr to /dev/null, use -q to suppress the output on
stderr.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The referenced commit tried to fix a flaw in stash's handling of a user
supplied invalid ref. i.e. 'git stash apply fake_ref@{0}' should fail
instead of applying stash@{0}. But, it did so in a naive way by avoiding the
use of the --default option of rev-parse, and instead manually supplied the
default revision if the user supplied an empty command line. This prevented
a common usage scenario of supplying flags on the stash command line (i.e.
non-empty command line) which would be parsed by lower level git commands,
without supplying a specific revision. This should fall back to the default
revision, but now it causes an error. e.g. 'git stash show -p'
The correct fix is to use the --verify option of rev-parse, which fails
properly if an invalid ref is supplied, and still allows falling back to a
default ref when one is not supplied.
Convert stash-drop to use --verify while we're at it, since specifying
multiple revisions for any of these commands is also an error and --verify
makes it so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
apply_stash() and show_stash() each call rev-parse with
'--default refs/stash' as an argument. This option causes rev-parse to
operate on refs/stash if it is not able to successfully operate on any
element of the command line. This includes failure to supply a "valid"
revision. This has the effect of causing 'stash apply' and 'stash show'
to operate as if stash@{0} had been supplied when an invalid revision is
supplied.
e.g. 'git stash apply stash@{1}' would fall back to
'git stash apply stash@{0}'
This patch modifies these two functions so that they avoid using the
--default option of rev-parse.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Unlike the case where the user does have a real change in the work tree,
refusing to work because of unclean stat information is not very helpful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
"git stash -h" showed some incomplete and ugly usage information.
For example, the useful "--keep-index" option for "save" or the "--index"
option for "apply" were not shown. Also in the documentation synopsis they
were not shown, so that there is no incentive to scroll down and even see
that such options exist.
This patch improves the git-stash synopsis in the documentation by
mentioning that further options to the stash commands and then copies
this synopsis to the usage information string of git-stash.sh.
For the latter, the dashless git command string has to be inserted on the
second and the following usage lines. The code of this is taken from
git-sh-setup so that all lines will show the command string.
Note that the "create" command is not advertised at all now, because
it was not mentioned in git-stash.txt.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add branch subcommand to completions and USAGE for git-stash.sh.
Complete stash names for show, apply, drop, pop, and branch.
Add "--index" long option for apply.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A command line "git stash save --keep-index I was doing this" was
misparsed and keep-index codepath did not trigger.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash save' saves local modifications to a new stash, and runs 'git
reset --hard' to revert them to a clean index and work tree. When the
'--keep-index' option is specified, after that 'git reset --hard' the
previous contents of the index is restored and the work tree is updated
to match the index. This option is useful if the user wants to commit
only parts of his local modifications, but wants to test those parts
before committing.
Also add support for the completion of the new option, and add an
example use case to the documentation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restores the stashed state on a new branch rooted at the commit on which
the stash was originally created, so that conflicts caused by subsequent
changes on the original branch can be dealt with.
(Thanks to Junio for this nice idea.)
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing or stashing, chances are that you do not care about
dirty submodules, since they are not updated by those actions anyway.
So ignore the submodules' states.
Note: the submodule states -- as committed in the superproject --
will still be stashed and rebased, it is _just_ the state of the
submodule in the working tree which is ignored.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This combines the existing stash subcommands 'apply' and 'drop' to
allow a single stash entry to be applied and then dropped, in other
words 'popped', from the stash list.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a single stash entry to be deleted. It takes an
optional argument which is a stash reflog entry. If no
arguments are supplied, it drops the most recent stash entry.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it is so tempting to expect "git stash clear stash@{4}"
to remove the fourth element in the stash while leaving other
elements intact, we should not blindly throw away everything
upon seeing such a command.
This may change when we start using "git reflog delete" to
selectively nuke a single (or multiple, for that matter) stash
entries with such a command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some scripts and libraries check stderr to detect a failing command,
instead of checking the exit code. Because the output from git-status
is not primarily for machine consumption, it would not hurt to send
these messages to stdout instead and it will make it easier to drive
the command for such callers.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user types "git stash" mistakenly thinking that this will list
their stashes he/she may be surprised to see that it actually saved
a new stash and reset their working tree and index.
In the worst case they might not know how to recover the state. So
help them by telling them exactly what was saved and also how to
restore it immediately.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current git-stash behaviour is very error prone to typos. For example,
if you typed "git-stash llist", git-stash would think that you wanted to
save to a stash named "llist", but in fact, you meant "git-stash list".
Signed-off-by: Kevin Leung <kevinlsk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have a file called HEAD in your work tree, many commands that
our scripts feed "HEAD" to would complain about the rev vs path
ambiguity. A solution is to form command line more carefully by
appending -- to them, which makes it clear that we mean HEAD rev not
HEAD file.
This patch would apply to maint.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When colors are set to "true" on the repository, the git log output
will contain control characters to set/reset the colors, even when
the output is to a pipe. This makes list_stash() fail as the
downstream sed does not see what it is expecting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
* jc/stash-create:
git-stash: Fix listing stashes
git-merge: no reason to use cpio anymore
Revert "rebase: allow starting from a dirty tree."
rebase: allow starting from a dirty tree.
stash: implement "stash create"
Commit bc9e7399af "reverted" commit
f12e925ac2
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--text follows this line--
These commands currently lack OPTIONS_SPEC; allow people to
easily list with "git grep 'OPTIONS_SPEC=$'" what they can help
improving.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 89d750bf6f I got a little too
aggressive with changing "git diff" to "git diff-tree". This is
shown to the user, who expects to see a full diff on their console,
and will want to see the output of their custom diff drivers (if
any) as the whole point of this call site is to show the diff to
the end-user.
Noticed by Johannes Sixt <j.sixt@viscovery.net>.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-stash needs to restrict itself to plumbing when running automated
diffs as part of its operation as the user may have configured a
custom diff driver that opens an interactive UI for certain/all
files. Doing that during scripted actions is very unfriendly to
the end-user and may cause git-stash to fail to work.
Reported by Johannes Sixt
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This subcommand creates a stash from the current state and writes out the
resulting commit object ID to the standard output, without updating the
stash ref nor resetting the tree. It is intended to be used by scripts
to temporarily rewind the working tree to a clean state.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no newline at the end of the index commit message, putting
the shell prompt at its end after a 'git cat-file commit $id'. This is
similar to what was fixed in 843103d693.
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, "apply --index" codepath was bolted on to the
"update working tree files and index, but then revert the
changes we make to the index except for added files so that we
do not forget about them" codepath, almost as an afterthought.
Because "apply --index" first prepares the final index state
upfront, "revert except the added paths" postprocessing does not
have to be done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two bugs that made the command practically unusable were fixed
with this.
- A stash created with a clean index does not have any
difference between the base tree and the index tree.
Trying to apply the diff between them to the index would
error out with "No changes". Even when the user asked to
unstash with --index, do not bother with --index action if
the base tree and the index tree match.
- After successfully performing the working tree merge, the
index was reloaded from an earlier state of unstashed index
with "read-tree"; this left all the paths cache dirty. By
moving the call to git-status after this read-tree, match the
cached stat information in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier commit 7ab3cc70 fixed "stash clear" but broke save_stash,
because it forgot to make sure the reflog file exists before saving.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We say "SUBDIRECTORY_OK" but we did not chdir to toplevel; this
is fine as long as everything we use can be started from a
subdirectory, but unfortunately "merge-recursive" is not one of
the programs you can safely use from a subdirectory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier when we read a tree into a temporary index, we read it
from scratch. Start from the current index and use read-tree -m
to preserve cached stat information as much as possible, in
order to speed up "git add -u". This makes "git stash" usable
in a source tree of nontrivial size.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given this subcommand, git-stash will try to merge the stashed
index into the current one. Only trivial merges are possible, since
we have no index for the index ;-) If a trivial merge is not possible,
git-stash will bail out with a hint to skip the --index option.
For good measure, finally include a test case.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows you to say:
$ git stash starting to implement X
while creating a stash, and the resulting "stash list entry
would read as:
$ git stash list
stash@{0}: On master: starting to implement X
instead of the default message which talks about the commit the
stash happens to be based on (hence does not have much to do
with what the stashed change is trying to do).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stash is about a change on top of an existing commit, and not
about that commit that happened to be on which the change was
created. Match the message we see in "git stash list" with the
commit log message to make this clear.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
If I do
git cat-file commit $commitid
for a commit created by stash, the next prompt starts directly after the
shortlog of HEAD.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
