Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust several files to be more explicit about their dependency on
replace-objects to accommodate this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the stream_loose_object() function introduced in the
preceding commit to unpack large objects. Before this we'd need to
malloc() the size of the blob before unpacking it, which could cause
OOM with very large blobs.
We could use the new streaming interface to unpack all blobs, but
doing so would be much slower, as demonstrated e.g. with this
benchmark using git-hyperfine[0]:
rm -rf /tmp/scalar.git &&
git clone --bare https://github.com/Microsoft/scalar.git /tmp/scalar.git &&
mv /tmp/scalar.git/objects/pack/*.pack /tmp/scalar.git/my.pack &&
git hyperfine \
-r 2 --warmup 1 \
-L rev origin/master,HEAD -L v "10,512,1k,1m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/scalar.git/my.pack'
Here we'll perform worse with lower core.bigFileThreshold settings
with this change in terms of speed, but we're getting lower memory use
in return:
Summary
'./git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master' ran
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.02 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.02 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.09 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.10 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.11 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
A better benchmark to demonstrate the benefits of that this one, which
creates an artificial repo with a 1, 25, 50, 75 and 100MB blob:
rm -rf /tmp/repo &&
git init /tmp/repo &&
(
cd /tmp/repo &&
for i in 1 25 50 75 100
do
dd if=/dev/urandom of=blob.$i count=$(($i*1024)) bs=1024
done &&
git add blob.* &&
git commit -mblobs &&
git gc &&
PACK=$(echo .git/objects/pack/pack-*.pack) &&
cp "$PACK" my.pack
) &&
git hyperfine \
--show-output \
-L rev origin/master,HEAD -L v "512,50m,100m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum'
Using this test we'll always use >100MB of memory on
origin/master (around ~105MB), but max out at e.g. ~55MB if we set
core.bigFileThreshold=50m.
The relevant "Maximum resident set size" lines were manually added
below the relevant benchmark:
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master' ran
Maximum resident set size (kbytes): 107080
1.02 ± 0.78 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 106968
1.09 ± 0.79 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 107032
1.42 ± 1.07 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 107072
1.83 ± 1.02 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 55704
2.16 ± 1.19 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 4564
This shows that if you have enough memory this new streaming method is
slower the lower you set the streaming threshold, but the benefit is
more bounded memory use.
An earlier version of this patch introduced a new
"core.bigFileStreamingThreshold" instead of re-using the existing
"core.bigFileThreshold" variable[1]. As noted in a detailed overview
of its users in [2] using it has several different meanings.
Still, we consider it good enough to simply re-use it. While it's
possible that someone might want to e.g. consider objects "small" for
the purposes of diffing but "big" for the purposes of writing them
such use-cases are probably too obscure to worry about. We can always
split up "core.bigFileThreshold" in the future if there's a need for
that.
0. https://github.com/avar/git-hyperfine/
1. https://lore.kernel.org/git/20211210103435.83656-1-chiyutianyi@gmail.com/
2. https://lore.kernel.org/git/20220120112114.47618-5-chiyutianyi@gmail.com/
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the name implies, "get_data(size)" will allocate and return a given
amount of memory. Allocating memory for a large blob object may cause the
system to run out of memory. Before preparing to replace calling of
"get_data()" to unpack large blob objects in latter commits, refactor
"get_data()" to reduce memory footprint for dry_run mode.
Because in dry_run mode, "get_data()" is only used to check the
integrity of data, and the returned buffer is not used at all, we can
allocate a smaller buffer and use it as zstream output. Make the function
return NULL in the dry-run mode, as no callers use the returned buffer.
The "find [...]objects/?? -type f | wc -l" test idiom being used here
is adapted from the same "find" use added to another test in
d9545c7f46 (fast-import: implement unpack limit, 2016-04-25).
Suggested-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a filesystem-dependent mechanism to optimize the way the
bits for many loose object files are ensured to hit the disk
platter.
* ns/batch-fsync:
core.fsyncmethod: performance tests for batch mode
t/perf: add iteration setup mechanism to perf-lib
core.fsyncmethod: tests for batch mode
test-lib-functions: add parsing helpers for ls-files and ls-tree
core.fsync: use batch mode and sync loose objects by default on Windows
unpack-objects: use the bulk-checkin infrastructure
update-index: use the bulk-checkin infrastructure
builtin/add: add ODB transaction around add_files_to_cache
cache-tree: use ODB transaction around writing a tree
core.fsyncmethod: batched disk flushes for loose-objects
bulk-checkin: rebrand plug/unplug APIs as 'odb transactions'
bulk-checkin: rename 'state' variable and separate 'plugged' boolean
The unpack-objects functionality is used by fetch, push, and fast-import
to turn the transfered data into object database entries when there are
fewer objects than the 'unpacklimit' setting.
By enabling an odb-transaction when unpacking objects, we can take advantage
of batched fsyncs.
Here are some performance numbers to justify batch mode for
unpack-objects, collected on a WSL2 Ubuntu VM.
Fsync Mode | Time for 90 objects (ms)
-------------------------------------
Off | 170
On,fsync | 760
On,batch | 230
Note that the default unpackLimit is 100 objects, so there's a 3x
benefit in the worst case. The non-batch mode fsync scales linearly
with the number of objects, so there are significant benefits even with
smaller numbers of objects.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hash_object_file() function to take an "enum
object_type".
Since a preceding commit all of its callers are passing either
"{commit,tree,blob,tag}_type", or the result of a call to type_name(),
the parse_object() caller that would pass NULL is now using
stream_object_signature().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the write_object_file() function to take an "enum object_type"
instead of a "const char *type". Its callers either passed
{commit,tree,blob,tag}_type and can pass the corresponding OBJ_* type
instead, or were hardcoding strings like "blob".
This avoids the back & forth fragility where the callers of
write_object_file() would have the enum type, and convert it
themselves via type_name(). We do have to now do that conversion
ourselves before calling write_object_file_prepare(), but those
codepaths will be similarly adjusted in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're hashing a value which is going to be an object ID, we want to
zero-pad that value if necessary. To do so, use the final_oid_fn
instead of the final_fn anytime we're going to create an object ID to
ensure we perform this operation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we'll want oidread to automatically set the hash
algorithm member for an object ID we read into it, so ensure we use
oidread instead of hashcpy everywhere we're copying a hash value into a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fsck API clean-up.
* ab/fsck-api-cleanup:
fetch-pack: use new fsck API to printing dangling submodules
fetch-pack: use file-scope static struct for fsck_options
fetch-pack: don't needlessly copy fsck_options
fsck.c: move gitmodules_{found,done} into fsck_options
fsck.c: add an fsck_set_msg_type() API that takes enums
fsck.c: pass along the fsck_msg_id in the fsck_error callback
fsck.[ch]: move FOREACH_FSCK_MSG_ID & fsck_msg_id from *.c to *.h
fsck.c: give "FOREACH_MSG_ID" a more specific name
fsck.c: undefine temporary STR macro after use
fsck.c: call parse_msg_type() early in fsck_set_msg_type()
fsck.h: re-order and re-assign "enum fsck_msg_type"
fsck.h: move FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} into an enum
fsck.c: refactor fsck_msg_type() to limit scope of "int msg_type"
fsck.c: rename remaining fsck_msg_id "id" to "msg_id"
fsck.c: remove (mostly) redundant append_msg_id() function
fsck.c: rename variables in fsck_set_msg_type() for less confusion
fsck.h: use "enum object_type" instead of "int"
fsck.h: use designed initializers for FSCK_OPTIONS_{DEFAULT,STRICT}
fsck.c: refactor and rename common config callback
Change the fsck_walk_func to use an "enum object_type" instead of an
"int" type. The types are compatible, and ever since this was added in
355885d531 (add generic, type aware object chain walker, 2008-02-25)
we've used entries from object_type (OBJ_BLOB etc.).
So this doesn't really change anything as far as the generated code is
concerned, it just gives the compiler more information and makes this
easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow hash_object_file() to work on arbitrary repos by introducing a
git_hash_algo parameter. Change callers which have a struct repository
pointer in their scope to pass on the git_hash_algo from the said repo.
For all other callers, pass on the_hash_algo, which was already being
used internally at hash_object_file(). This functionality will be used
in the following patch to make check_object_signature() be able to work
on arbitrary repos (which, in turn, will be used to fix an
inconsistency at object.c:parse_object()).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git unpack-objects' shows a progress line only counting the number of
unpacked objects, so if some of the received objects are unusually
large, then that progress might appear to be frozen while processing
such a larger object. I just stared at a seemingly stuck progress
line for over half a minute, while 'git fetch' was busy receiving a
pack with only a couple of objects (i.e. fewer than
'fetch.unpackLimit'), with one of them being over 80MB.
Display throughput in 'git unpack-objects' progress line, so we show
that something is going on even when receiving and processing a large
object.
Counting the consumed bytes is far away from the place that
counts objects and displays progress, and to pass around the 'struct
progress' instance we would have to modify the signature of five
functions and 14 of their callsites: this is just too much churn, so
let's rather make it file-scope static.
'git index-pack', i.e. the non-unpacking cousin of 'git
unpack-objects' already includes throughput in its progress line, and
it uses a file-scope static 'struct progress' instance as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables. It also
matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rounds out the previous three patches, covering the
inequality logic for the "hash" variant of the functions.
As with the previous three, the accompanying code changes
are the mechanical result of applying the coccinelle patch;
see those patches for more discussion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous commit, we must call fsck's "finish"
function in order to catch any queued objects for
.gitmodules checks.
This second pass will be able to access any incoming
objects, because we will have exploded them to loose objects
by now.
This isn't quite ideal, because it means that bad objects
may have been written to the object database (and a
subsequent operation could then reference them, even if the
other side doesn't send the objects again). However, this is
sufficient when used with receive.fsckObjects, since those
loose objects will all be placed in a temporary quarantine
area that will get wiped if we find any problems.
Signed-off-by: Jeff King <peff@peff.net>
If fsck reports an error, we say only "Error in object".
This isn't quite as bad as it might seem, since the fsck
code would have dumped some errors to stderr already. But it
might help to give a little more context. The earlier output
would not have even mentioned "fsck", and that may be a clue
that the "fsck.*" or "*.fsckObjects" config may be relevant.
Signed-off-by: Jeff King <peff@peff.net>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the "flags" is shared, it's a good idea to keep track of who
uses what bit. When we need to use more flags in library code, we can
be sure it won't be re-used for another purpose by some caller.
While at there, fix the location of "5" (should be in a different
column than "4" two lines down)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More abstraction of hash function from the codepath.
* bc/hash-algo:
hash: update obsolete reference to SHA1_HEADER
bulk-checkin: abstract SHA-1 usage
csum-file: abstract uses of SHA-1
csum-file: rename sha1file to hashfile
read-cache: abstract away uses of SHA-1
pack-write: switch various SHA-1 values to abstract forms
pack-check: convert various uses of SHA-1 to abstract forms
fast-import: switch various uses of SHA-1 to the_hash_algo
sha1_file: switch uses of SHA-1 to the_hash_algo
builtin/unpack-objects: switch uses of SHA-1 to the_hash_algo
builtin/index-pack: improve hash function abstraction
hash: create union for hash context allocation
hash: move SHA-1 macros to hash.h
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch various uses of explicit calls to SHA-1 into references to
the_hash_algo to better abstract away the various uses of it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definition and declaration of write_sha1_file to
struct object_id and adjust usage of this function.
This commit also converts static function write_sha1_file_prepare, as it
is closely related.
Rename these functions to write_object_file and
write_object_file_prepare respectively.
Replace sha1_to_hex, hashcpy and hashclr with their oid equivalents
wherever possible.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of hash_sha1_file to use
struct object_id and adjust all function calls.
Rename this function to hash_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common mistake when writing binary search is to allow possible
integer overflow by using the simple average:
mid = (min + max) / 2;
Instead, use the overflow-safe version:
mid = min + (max - min) / 2;
This translation is safe since the operation occurs inside a loop
conditioned on "min < max". The included changes were found using
the following git grep:
git grep '/ *2;' '*.c'
Making this cleanup will prevent future review friction when a new
binary search is contructed based on existing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_blob to take a pointer to struct object_id.
The commit was created with manual changes to blob.c and blob.h, plus
the following semantic patch:
@@
expression E1;
@@
- lookup_blob(E1.hash)
+ lookup_blob(&E1)
@@
expression E1;
@@
- lookup_blob(E1->hash)
+ lookup_blob(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
