Recent versions of GNU grep are pickier when their input contains
arbitrary binary data, which some of our tests uses. Rewrite the
tests to sidestep the problem.
* jk/grep-binary-workaround-in-test:
t9200: avoid grep on non-ASCII data
t8005: avoid grep on non-ASCII data
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
Traditionally, the tests that try commands that work on the
contents in the working tree were named with "worktree" in their
filenames, but with the recent addition of "git worktree"
subcommand, whose tests are also named similarly, it has become
harder to tell them apart. The traditional tests have been renamed
to use "work-tree" instead in an attempt to differentiate them.
* mg/work-tree-tests:
tests: rename work-tree tests to *work-tree*
The configuration system has been taught to phrase where it found a
bad configuration variable in a better way in its error messages.
"git config" learnt a new "--show-origin" option to indicate where
the values come from.
* ls/config-origin:
config: add '--show-origin' option to print the origin of a config value
config: add 'origin_type' to config_source struct
rename git_config_from_buf to git_config_from_mem
t: do not hide Git's exit code in tests using 'nul_to_q'
The ref-filter's format-parsing code has been refactored, in
preparation for "branch --format" and friends.
* kn/ref-filter-atom-parsing:
ref-filter: introduce objectname_atom_parser()
ref-filter: introduce contents_atom_parser()
ref-filter: introduce remote_ref_atom_parser()
ref-filter: align: introduce long-form syntax
ref-filter: introduce align_atom_parser()
ref-filter: introduce parse_align_position()
ref-filter: introduce color_atom_parser()
ref-filter: introduce parsing functions for each valid atom
ref-filter: introduce struct used_atom
ref-filter: bump 'used_atom' and related code to the top
ref-filter: use string_list_split over strbuf_split
The internal API to interact with "remote.*" configuration
variables has been streamlined.
* tg/git-remote:
remote: use remote_is_configured() for add and rename
remote: actually check if remote exits
remote: simplify remote_is_configured()
remote: use parse_config_key
Sine the credential.helper key is a multi-valued config
list, there's no way to "unset" a helper once it's been set.
So if your system /etc/gitconfig sets one, you can never
avoid running it, but only add your own helpers on top.
Since an empty value for credential.helper is nonsensical
(it would just try to run "git-credential-"), we can assume
nobody is using it. Let's define it to reset the helper
list, letting you override lower-priority instances which
have come before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to apache 2.2, apache 2.4 does not load mod_unixd in its
default configuration (because there are choices). Thus, with the
current config, apache 2.4.10 will not be started and the httpd tests
will not run on distros with default apache config (RedHat type).
Enable mod_unixd to make the httpd tests run. This does not affect
distros negatively which have that config already in their default
(Debian type). httpd tests will run on these before and after this patch.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 8bf4bec (add "ok=sigpipe" to test_must_fail and use
it to fix flaky tests, 2015-11-27) taught t5504 to handle
"git push" racily exiting with SIGPIPE rather than failing.
However, one of the tests checks the output of the command,
as well. In the SIGPIPE case, we will not have produced any
output. If we want the test to be truly non-flaky, we have
to accept either output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a command is marked as test_must_fail but dies with a
signal, we consider that a problem and report the error to
stderr. However, we don't say _which_ signal; knowing that
can make debugging easier. Let's share as much as we know.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A v2 pack index file can specify an offset within a packfile
of up to 2^64-1 bytes. On a system with a signed 64-bit
off_t, we can represent only up to 2^63-1. This means that a
corrupted .idx file can end up with a negative offset in the
pack code. Our bounds-checking use_pack function looks for
too-large offsets, but not for ones that have wrapped around
to negative. Let's do so, which fixes an out-of-bounds
access demonstrated in t5313.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a pack .idx file has a corrupted offset for an object, we
may try to access an offset in the .idx or .pack file that
is larger than the file's size. For the .pack case, we have
use_pack() to protect us, which realizes the access is out
of bounds. But if the corrupted value asks us to look in the
.idx file's secondary 64-bit offset table, we blindly add it
to the mmap'd index data and access arbitrary memory.
We can fix this with a simple bounds-check compared to the
size we found when we opened the .idx file.
Note that there's similar code in index-pack that is
triggered only during "index-pack --verify". To support
both, we pull the bounds-check into a separate function,
which dies when it sees a corrupted file.
It would be nice if we could return an error, so that the
pack code could try to find a good copy of the object
elsewhere. Currently nth_packed_object_offset doesn't have
any way to return an error, but it could probably use "0" as
a sentinel value (since no object can start there). This is
the minimal fix, and we can improve the resilience later on
top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our on-disk .pack and .idx files may reference other data by
offset. We should make sure that we are not fooled by
corrupt data into accessing memory outside of our mmap'd
boundaries.
This patch adds a series of tests for offsets found in .pack
and .idx files. For the most part we get this right, but
there are two tests of .idx files marked as failures: we do
not bounds-check offsets in the v2 index's extended offset
table, nor do we handle .idx offsets that overflow a signed
off_t.
With these tests, we should have good coverage of all
offsets found in these files. Note that this doesn't cover
.bitmap files, which may have similar bugs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a pilot error to call `git config section.key value` outside of
any Git worktree. The message
error: could not lock config file .git/config: No such file or
directory
is not very helpful in that situation, though. Let's print a helpful
message instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying machinery is well-tested, but the configuration option
itself was tested only in t3400-rebase.sh.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows repository browsers like GitHub to display the content of
the file nicely formatted.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--find-renames= and --rename-threshold= should be aliases.
Signed-off-by: Felipe Gonçalves Assis <felipegassis@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10ae752 (merge-recursive: option to specify rename threshold,
2010-09-27) introduced this feature but did not include any tests.
The tests use the new option --find-renames, which replaces the then
introduced and now deprecated option --rename-threshold.
Also update name and description of t3032 for consistency:
"merge-recursive options" -> "merge-recursive space options"
Signed-off-by: Felipe Gonçalves Assis <felipegassis@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a regression introduced by 74703a1e4d (submodule: rewrite
`module_list` shell function in C, 2015-09-02).
Add a test to ensure we list the right submodule when giving a
specific pathspec.
Reported-By: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add -B <branchname>" did not work.
* nd/worktree-add-B:
worktree add -B: do the checkout test before update branch
worktree: fix "add -B"
Another try to add support to the ignore mechanism that lets you
say "this is excluded" and then later say "oh, no, this part (that
is a subset of the previous part) is not excluded".
* nd/exclusion-regression-fix:
dir.c: don't exclude whole dir prematurely
dir.c: support marking some patterns already matched
dir.c: support tracing exclude
dir.c: fix match_pathname()
"git rev-parse --git-common-dir" used in the worktree feature
misbehaved when run from a subdirectory.
* nd/git-common-dir-fix:
rev-parse: take prefix into account in --git-common-dir
"git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a
rev, i.e. the object named by the the pathname with wildcard
characters in a tree object.
* nd/dwim-wildcards-as-pathspecs:
get_sha1: don't die() on bogus search strings
check_filename: tighten dwim-wildcard ambiguity
checkout: reorder check_filename conditional
GNU grep 2.23 detects the input used in this test as binary data so it
does not work for extracting lines from a file. We could add the "-a"
option to force grep to treat the input as text, but not all
implementations support that. Instead, use sed to extract the desired
lines since it will always treat its input as text.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GNU grep 2.23 detects the input used in this test as binary data so it
does not work for extracting lines from a file. We could add the "-a"
option to force grep to treat the input as text, but not all
implementations support that. Instead, use sed to extract the desired
lines since it will always treat its input as text.
While touching these lines, modernize the test style to avoid hiding the
exit status of "git blame" and remove a space following a redirection
operator. Also swap the order of the expected and actual output
files given to test_cmp; we compare expect and actual to show how
actual output differs from what is expected.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn has not supported GIT_SVN_NO_OPTIMIZE_COMMITS for
the "set-tree" sub-command in 9 years since commit 490f49ea58
("git-svn: remove optimized commit stuff for set-tree").
So remove this target and TSVN variable to avoid confusion.
ref: http://mid.gmane.org/56C9B7B7.7030406@f2.dion.ne.jp
Helped-by: Kazutoshi Satoda <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
df747b81 (convert.c: refactor crlf_action, 2016-02-10) introduced a
bug to "git ls-files --eol".
The "text" attribute was shown as "text eol=lf" or "text eol=crlf",
depending on core.autocrlf or core.eol.
Correct this and add test cases in t0027.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking `git-remote --set-url` we do not check the return
value when writing the actual new URL to the configuration file,
pretending to the user that the configuration has been set while
it was in fact not persisted.
Fix this problem by dying early when setting the config fails.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to unset upstream configurations we do not check
return codes for the `git_config_set` functions. As those may
indicate that we were unable to unset the respective
configuration we may exit successfully without any error message
while in fact the upstream configuration was not unset.
Fix this by dying with an error message when we cannot unset the
configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setting up a new tracking branch fails due to issues with
the configuration file we do not report any errors to the user
and pretend setting the tracking branch succeeded.
Setting up the tracking branch is handled by the
`install_branch_config` function. We do not want to simply die
there as the function is not only invoked when explicitly setting
upstream information with `git branch --set-upstream-to=`, but
also by `git push --set-upstream` and `git clone`. While it is
reasonable to die in the explict first case, we would lose
information in the latter two cases, so we only print the error
message but continue the program as usual.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If config values are queried using 'git config' (e.g. via --get,
--get-all, --get-regexp, or --list flag) then it is sometimes hard to
find the configuration file where the values were defined.
Teach 'git config' the '--show-origin' option to print the source
configuration file for every printed value.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the config origin_type to print more detailed error messages that
inform the user about the origin of a config error (file, stdin, blob).
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion from "svn.pathnameencoding" to UTF-8 should be applied
first, and then URL encoding should be applied on the resulting UTF-8
path. The reversed order of these transforms (used before this fix)
makes non-UTF-8 URL which causes error from Subversion such as
"Filesystem has no item: '...' path not found" when sending a rename (or
a copy) from non-ASCII path.
[ew: t9115 test case added (requires SVN_HTTPD_PORT set to test),
squash LC_ALL=$a_utf8_locale export from Kazutoshi for Cygwin]
Signed-off-by: Kazutoshi SATODA <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Without the initialization of $self->{pathnameencoding}, conversion in
repo_path() is always skipped as $self->{pathnameencoding} is undefined
even if "svn.pathnameencoding" is configured.
The lack of conversion results in mysterious failure of dcommit (e.g.
"Malformed XML") which happen only when a commit involves a change on
non-ASCII path.
[ew: add test case to t9115,
squash LC_ALL=$a_utf8_locale export from Kazutoshi for Cygwin]
Signed-off-by: Kazutoshi SATODA <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
"Work tree" or "working tree" is the name of a checked out tree,
"worktree" the name of the command which manages several working trees.
The naming of tests mixes these two, currently:
$ls t/*worktree*
t/t1501-worktree.sh
t/t1509-root-worktree.sh
t/t2025-worktree-add.sh
t/t2026-worktree-prune.sh
t/t2027-worktree-list.sh
t/t2104-update-index-skip-worktree.sh
t/t3320-notes-merge-worktrees.sh
t/t7011-skip-worktree-reading.sh
t/t7012-skip-worktree-writing.sh
t/t7409-submodule-detached-worktree.sh
$grep -l "git worktree" t/*.sh
t/t0002-gitfile.sh
t/t1400-update-ref.sh
t/t2025-worktree-add.sh
t/t2026-worktree-prune.sh
t/t2027-worktree-list.sh
t/t3320-notes-merge-worktrees.sh
t/t7410-submodule-checkout-to.sh
Rename t1501, t1509 and t7409 to make it clear on first glance that they
test work tree related behavior, rather than the worktree command.
t2104, t7011 and t7012 are about the "skip-worktree" flag so that their
name should remain unchanged.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce optional prefixes "width=" and "position=" for the align atom
so that the atom can be used as "%(align:width=<width>,position=<position>)".
Add Documentation and tests for the same.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git should not be on the left-hand side of a pipe, because it hides the exit
code, and we want to make sure git does not fail.
Fix all invocations of 'nul_to_q' (defined in /t/test-lib-functions.sh) using
this pattern. There is one more occurrence of the pattern in t9010-svn-fe.sh
which is too evolved to change it easily.
All remaining test code that does not adhere to the pattern can be found with
the following command:
git grep -E 'git.*[^|]\|($|[^|])'
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "user.useConfigOnly" configuration variable can be used to
force the user to always set user.email & user.name configuration
variables, serving as a reminder for those who work on multiple
projects and do not want to put these in their $HOME/.gitconfig.
* da/user-useconfigonly:
ident: add user.useConfigOnly boolean for when ident shouldn't be guessed
fmt_ident: refactor strictness checks
The automatic typo correction applied to an alias was broken
with a recent change already in 'master'.
* nd/clear-gitenv-upon-use-of-alias:
restore_env(): free the saved environment variable once we are done
git: simplify environment save/restore logic
git: protect against unbalanced calls to {save,restore}_env()
git: remove an early return from save_env_before_alias()
An earlier adjustment of test mistakenly used write_script
to prepare a file whose exact content matters for the test;
reverting that part fixes the breakage for those who use
SHELL_PATH that is different from /bin/sh.
* mg/mingw-test-fix:
t9100: fix breakage when SHELL_PATH is not /bin/sh
Test scripts have been updated to remove assumptions that are not
portable between Git for POSIX and Git for Windows, or to skip ones
with expectations that are not satisfiable on Git for Windows.
* js/mingw-tests: (21 commits)
gitignore: ignore generated test-fake-ssh executable
mingw: do not bother to test funny file names
mingw: skip a test in t9130 that cannot pass on Windows
mingw: handle the missing POSIXPERM prereq in t9124
mingw: avoid illegal filename in t9118
mingw: mark t9100's test cases with appropriate prereqs
t0008: avoid absolute path
mingw: work around pwd issues in the tests
mingw: fix t9700's assumption about directory separators
mingw: skip test in t1508 that fails due to path conversion
tests: turn off git-daemon tests if FIFOs are not available
mingw: disable mkfifo-based tests
mingw: accomodate t0060-path-utils for MSYS2
mingw: fix t5601-clone.sh
mingw: let lstat() fail with errno == ENOTDIR when appropriate
mingw: try to delete target directory before renaming
mingw: prepare the TMPDIR environment variable for shell scripts
mingw: factor out Windows specific environment setup
Git.pm: stop assuming that absolute paths start with a slash
mingw: do not trust MSYS2's MinGW gettext.sh
...
It turns out "git clone" over rsync transport has been broken when
the source repository has packed references for a long time, and
nobody noticed nor complained about it.
* jk/drop-rsync-transport:
transport: drop support for git-over-rsync
The emulated "yes" command used in our test scripts has been
tweaked not to spend too much time generating unnecessary output
that is not used, to help those who test on Windows where it would
not stop until it fills the pipe buffer due to lack of SIGPIPE.
* js/test-lib-windows-emulated-yes:
test-lib: limit the output of the yes utility
"git push --force-with-lease" has been taught to report if the push
needed to force (or fast-forwarded).
* aw/push-force-with-lease-reporting:
push: fix ref status reporting for --force-with-lease
The low-level merge machinery has been taught to use CRLF line
termination when inserting conflict markers to merged contents that
are themselves CRLF line-terminated.
* js/xmerge-marker-eol:
merge-file: ensure that conflict sections match eol style
merge-file: let conflict markers match end-of-line style of the context
This is the test missing from fb86e32 (git remote: allow adding
remotes agreeing with url.<...>.insteadOf, 2014-12-23): we should
allow adding a remote with the URL when it agrees with the
url.<...>.insteadOf setting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both remote add and remote rename use a slightly different hand-rolled
check if the remote exits. The hand-rolled check may have some subtle
cases in which it might fail to detect when a remote already exists.
One such case was fixed in fb86e32 ("git remote: allow adding remotes
agreeing with url.<...>.insteadOf"). Another case is when a remote is
configured as follows:
[remote "foo"]
vcs = bar
If we try to run `git remote add foo bar` with the above remote
configuration, git segfaults. This change fixes it.
In addition, git remote rename $existing foo with the configuration for
foo as above silently succeeds, even though foo already exists,
modifying its configuration. With this patch it fails with "remote foo
already exists".
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When converting the git remote command to a builtin in 211c89 ("Make
git-remote a builtin"), a few calls to check if a remote exists were
converted from:
if (!exists $remote->{$name}) {
[...]
to:
remote = remote_get(argv[1]);
if (!remote)
[...]
The new check is not quite correct, because remote_get() never returns
NULL if a name is given. This leaves us with the somewhat cryptic error
message "error: Could not remove config section 'remote.test'", if we
are trying to remove a remote that does not exist, or a similar error if
we try to rename a remote.
Use the remote_is_configured() function to check whether the remote
actually exists, and die with a more sensible error message ("No such
remote: $remotename") instead if it doesn't.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --force is not given but -B is, we should not proceed if the given
branch is already checked out elsewhere. add_worktree() has this test,
but it kicks in too late when "git branch --force" is already
executed. As a result, even though we correctly refuse to create a new
worktree, we have already updated the branch and mess up the other
checkout.
Repeat the die_if_checked_out() test again for this specific case before
"git branch" runs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current code does not update "symref" when -B is used. This string
contains the new HEAD. Because it's empty "git worktree add -B" fails at
symbolic-ref step.
Because branch creation is already done before calling add_worktree(),
-B is equivalent to -b from add_worktree() point of view. We do not need
the special case for -B.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a pattern "!foo/bar", this patch makes it not exclude
"foo" right away. This gives us a chance to examine "foo" and
re-include "foo/bar".
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Micha Wiedenmann <mw-u2@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git_connect is more information about connectivity
progress after: ("pass transport verbosity down to git_connect")
we should ensure it remains so for future users who need to
to diagnose networking problems.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the time, get_git_common_dir() returns an absolute path so
prefix is irrelevant. If it returns a relative path (e.g. from the
main worktree) then prefixing is required.
Noticed-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The emulated "yes" command used in our test scripts has been
tweaked not to spend too much time generating unnecessary output
that is not used, to help those who test on Windows where it would
not stop until it fills the pipe buffer due to lack of SIGPIPE.
* js/test-lib-windows-emulated-yes:
test-lib: limit the output of the yes utility
A new "<branch>^{/!-<pattern>}" notation can be used to name a
commit that is reachable from <branch> that does not match the
given <pattern>.
* wp/sha1-name-negative-match:
object name: introduce '^{/!-<negative pattern>}' notation
test for '!' handling in rev-parse's named commits
"git push --force-with-lease" has been taught to report if the push
needed to force (or fast-forwarded).
* aw/push-force-with-lease-reporting:
push: fix ref status reporting for --force-with-lease
Clean/smudge filters defined in a configuration file of lower
precedence can now be overridden to be a pass-through no-op by
setting the variable to an empty string.
* ls/clean-smudge-override-in-config:
convert: treat an empty string for clean/smudge filters as "cat"
The low-level merge machinery has been taught to use CRLF line
termination when inserting conflict markers to merged contents that
are themselves CRLF line-terminated.
* js/xmerge-marker-eol:
merge-file: ensure that conflict sections match eol style
merge-file: let conflict markers match end-of-line style of the context
The get_sha1() function generally returns an error code
rather than dying, and we sometimes speculatively call it
with something that may be a revision or a pathspec, in
order to see which one it might be.
If it sees a bogus ":/" search string, though, it complains,
without giving the caller the opportunity to recover. We can
demonstrate this in t6133 by looking for ":/*.t", which
should mean "*.t at the root of the tree", but instead dies
because of the invalid regex (the "*" has nothing to operate
on).
We can fix this by returning an error rather than calling
die(). Unfortunately, the tradeoff is that the error message
is slightly worse in cases where we _do_ know we have a rev.
E.g., running "git log ':/*.t' --" before yielded:
fatal: Invalid search pattern: *.t
and now we get only:
fatal: bad revision ':/*.t'
There's not a simple way to fix this short of passing a
"quiet" flag all the way through the get_sha1() stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When specifying both revisions and pathnames, we allow
"<rev> -- <pathspec>" to be spelled without the "--" as long
as it is not ambiguous. The original logic was something
like:
1. Resolve each item with get_sha1(). If successful,
we know it can be a <rev>. Verify that it _isn't_ a
filename, using verify_non_filename(), and complain of
ambiguity otherwise.
2. If get_sha1() didn't succeed, make sure that it _is_
a file, using verify_filename(). If not, complain
that it is neither a <rev> nor a <pathspec>.
Both verify_filename() and verify_non_filename() rely on
check_filename(), which definitely said "yes, this is a
file" or "no, it is not" using lstat().
Commit 28fcc0b (pathspec: avoid the need of "--" when
wildcard is used, 2015-05-02) introduced a convenience
feature: check_filename() will consider anything with
wildcard meta-characters as a possible filename, without
even checking the filesystem.
This works well for case 2. For such a wildcard, we would
previously have died and said "it is neither". Post-28fcc0b,
we assume it's a pathspec and proceed.
But it makes some instances of case 1 worse. We may have an
extended sha1 expression that contains meta-characters
(e.g., "HEAD^{/foo.*bar}"), and we now complain that it's
also a filename, due to the wildcard characters (even though
that wildcard would not match anything in the filesystem).
One solution would be to actually expand the pathname and
see if it matches anything on the filesystem. But that's
potentially expensive, and we do not have to be so rigorous
for this DWIM magic (if you want rigor, use "--").
Instead, we can just use different rules for cases 1 and 2.
When we know something is a rev, we will complain only if it
meets a much higher standard for "this is also a file";
namely that it actually exists in the filesystem. Case 2
remains the same: we use the looser "it could be a filename"
standard introduced by 28fcc0b.
We can accomplish this by pulling the wildcard logic out of
check_filename() and putting it into verify_filename(). Its
partner verify_non_filename() does not need a change, since
check_filename() goes back to implementing the "higher
standard".
Besides these two callers of check_filename(), there is one
other: git-checkout does a similar DWIM itself. It hits this
code path only after get_sha1() has returned failure, making
it case 2, which gets the special wildcard treatment.
Note that we drop the tests in t2019 in favor of a more
complete set in t6133. t2019 was not the right place for
them (it's about refname ambiguity, not dwim parsing
ambiguity), and the second test explicitly checked for the
opposite result of the case we are fixing here (which didn't
really make any sense; as shown by the test_must_fail in the
test, it would only serve to annoy people).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bcb11f1 (mingw: mark t9100's test cases with appropriate prereqs, 2016-01-27)
replaced "/bin/sh" in exec.sh by the shell specified in SHELL_PATH, but
that breaks the subtest which checks for a specific checksum of a tree
containing.
Revert that change that was not explained in the commit message anyways
(exec.sh is never executed).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be that:
git config --global user.email "(none)"
was a viable way for people to force themselves to set user.email in
each repository. This was helpful for people with more than one
email address, targeting different email addresses for different
clones, as it barred git from creating a commit unless the user.email
config was set in the per-repo config to the correct email address.
A recent change, 19ce497c (ident: keep a flag for bogus
default_email, 2015-12-10), however, declared that an explicitly
configured user.email is not bogus, no matter what its value is, so
this hack no longer works.
Provide the same functionality by adding a new configuration
variable user.useConfigOnly; when this variable is set, the
user must explicitly set user.email configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Dan Aloni <alonid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a filter is configured, a different code-path is used in convert.c
and entry.c via get_stream_filter(), but there are no test cases yet.
Add tests for the filter API by configuring the ident filter.
The result of the SHA1 conversion is not checked, this is already
done in other TC.
Add a parameter to checkout_files() in t0027.
While changing the signature, add another parameter for the eol= attribute.
This is currently unused, tests for e.g.
"* text=auto eol=lf" will be added in a separate commit.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying machinery used by "ls-files -o" and other commands
have been taught not to create empty submodule ref cache for a
directory that is not a submodule. This removes a ton of wasted
CPU cycles.
* jk/ref-cache-non-repository-optim:
resolve_gitlink_ref: ignore non-repository paths
clean: make is_git_repository a public function
dirname() emulation has been added, as Msys2 lacks it.
* js/dirname-basename:
mingw: avoid linking to the C library's isalpha()
t0060: loosen overly strict expectations
t0060: verify that basename() and dirname() work as expected
compat/basename.c: provide a dirname() compatibility function
compat/basename: make basename() conform to POSIX
Refactor skipping DOS drive prefixes
A few options of "git diff" did not work well when the command was
run from a subdirectory.
* nd/diff-with-path-params:
diff: make -O and --output work in subdirectory
diff-no-index: do not take a redundant prefix argument
"git tag" started listing a tag "foo" as "tags/foo" when a branch
named "foo" exists in the same repository; remove this unnecessary
disambiguation, which is a regression introduced in v2.7.0.
* jk/list-tag-2.7-regression:
tag: do not show ambiguous tag names as "tags/foo"
t6300: use test_atom for some un-modern tests
The description for SANITY prerequisite the test suite uses has
been clarified both in the comment and in the implementation.
* jk/sanity:
test-lib: clarify and tighten SANITY
A recent optimization to filter-branch in v2.7.0 introduced a
regression when --prune-empty filter is used, which has been
corrected.
* jk/filter-branch-no-index:
filter-branch: resolve $commit^{tree} in no-index case
Many codepaths that run "gc --auto" before exiting kept packfiles
mapped and left the file descriptors to them open, which was not
friendly to systems that cannot remove files that are open. They
now close the packs before doing so.
* js/close-packs-before-gc:
receive-pack: release pack files before garbage-collecting
merge: release pack files before garbage-collecting
am: release pack files before garbage-collecting
fetch: release pack files before garbage-collecting
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
"git reflog" incorrectly assumed that all objects that used to be
at the tip of a ref must be commits, which caused it to segfault.
* dk/reflog-walk-with-non-commit:
reflog-walk: don't segfault on non-commit sha1's in the reflog
"git send-email" was confused by escaped quotes stored in the alias
files saved by "mutt", which has been corrected.
* ew/send-email-mutt-alias-fix:
git-send-email: do not double-escape quotes from mutt
An earlier change in 2.5.x-era broke users' hooks and aliases by
exporting GIT_WORK_TREE to point at the root of the working tree,
interfering when they tried to use a different working tree without
setting GIT_WORK_TREE environment themselves.
* nd/stop-setenv-work-tree:
Revert "setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR"
The underlying machinery used by "ls-files -o" and other commands
have been taught not to create empty submodule ref cache for a
directory that is not a submodule. This removes a ton of wasted
CPU cycles.
* jk/ref-cache-non-repository-optim:
resolve_gitlink_ref: ignore non-repository paths
clean: make is_git_repository a public function
dirname() emulation has been added, as Msys2 lacks it.
* js/dirname-basename:
mingw: avoid linking to the C library's isalpha()
t0060: loosen overly strict expectations
t0060: verify that basename() and dirname() work as expected
compat/basename.c: provide a dirname() compatibility function
compat/basename: make basename() conform to POSIX
Refactor skipping DOS drive prefixes
A few options of "git diff" did not work well when the command was
run from a subdirectory.
* nd/diff-with-path-params:
diff: make -O and --output work in subdirectory
diff-no-index: do not take a redundant prefix argument
"ls-remote" learned an option to show which branch the remote
repository advertises as its primary by pointing its HEAD at.
* tg/ls-remote-symref:
ls-remote: add support for showing symrefs
ls-remote: use parse-options api
ls-remote: fix synopsis
ls-remote: document --refs option
ls-remote: document --quiet option
"git notes merge" used to limit the source of the merged notes tree
to somewhere under refs/notes/ hierarchy, which was too limiting
when inventing a workflow to exchange notes with remote
repositories using remote-tracking notes trees (located in e.g.
refs/remote-notes/ or somesuch).
* jk/notes-merge-from-anywhere:
notes: allow merging from arbitrary references
On Windows, there is no SIGPIPE. A consequence of this is that the
upstream process of a pipe does not notice the death of the downstream
process until the pipe buffer is full and writing more data returns an
error. This behavior is the reason for an annoying delay during the
execution of t7610-mergetool.sh: There are a number of test cases where
'yes' is invoked upstream. Since the utility is basically an endless
loop it runs, on Windows, until the pipe buffer is full. This does take
a few seconds.
The test suite has its own implementation of 'yes'. Modify it to produce
only a limited amount of output that is sufficient for the test suite.
The amount chosen should be sufficiently high for any test case, assuming
that future test cases will not exaggerate their demands of input from
an upstream 'yes' invocation.
[j6t: commit message]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag" started listing a tag "foo" as "tags/foo" when a branch
named "foo" exists in the same repository; remove this unnecessary
disambiguation, which is a regression introduced in v2.7.0.
* jk/list-tag-2.7-regression:
tag: do not show ambiguous tag names as "tags/foo"
t6300: use test_atom for some un-modern tests
The --force--with-lease push option leads to less
detailed status information than --force. In particular,
the output indicates that a reference was fast-forwarded,
even when it was force-updated.
Modify the --force-with-lease ref status logic to leverage
the --force ref status logic when the "lease" conditions
are met.
Also, enhance tests to validate output status reporting.
Signed-off-by: Andrew Wheeler <awheeler@motorola.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To name a commit, you can now use the :/!-<negative pattern> regex
style, and consequentially, say
$ git rev-parse HEAD^{/!-foo}
and it will return the hash of the first commit reachable from HEAD,
whose commit message does not contain "foo". This is the opposite of the
existing <rev>^{/<pattern>} syntax.
The specific use-case this is intended for is to perform an operation,
excluding the most-recent commits containing a particular marker. For
example, if you tend to make "work in progress" commits, with messages
beginning with "WIP", you work, then it could be useful to diff against
"the most recent commit which was not a WIP commit". That sort of thing
now possible, via commands such as:
$ git diff @^{/!-^WIP}
The leader '/!-', rather than simply '/!', to denote a negative match,
is chosen to leave room for additional modifiers in the future.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-over-rsync protocol is inefficient and broken, and
has been for a long time. It transfers way more objects than
it needs (grabbing all of the remote's "objects/",
regardless of which objects we need). It does its own ad-hoc
parsing of loose and packed refs from the remote, but
doesn't properly override packed refs with loose ones,
leading to garbage results (e.g., expecting the other side
to have an object pointed to by a stale packed-refs entry,
or complaining that the other side has two copies of the
refs[1]).
This latter breakage means that nobody could have
successfully pulled from a moderately active repository
since cd547b4 (fetch/push: readd rsync support, 2007-10-01).
We never made an official deprecation notice in the release
notes for git's rsync protocol, but the tutorial has marked
it as such since 914328a (Update tutorial., 2005-08-30).
And on the mailing list as far back as Oct 2005, we can find
Junio mentioning it as having "been deprecated for quite
some time."[2,3,4]. So it was old news then; cogito had
deprecated the transport in July of 2005[5] (though it did
come back briefly when Linus broke git-http-pull!).
Of course some people professed their love of rsync through
2006, but Linus clarified in his usual gentle manner[6]:
> Thanks! This is why I still use rsync, even though
> everybody and their mother tells me "Linus says rsync is
> deprecated."
No. You're using rsync because you're actively doing
something _wrong_.
The deprecation sentiment was reinforced in 2008, with a
mention that cloning via rsync is broken (with no fix)[7].
Even the commit porting rsync over to C from shell (cd547b4)
lists it as deprecated! So between the 10 years of informal
warnings, and the fact that it has been severely broken
since 2007, it's probably safe to simply remove it without
further deprecation warnings.
[1] http://article.gmane.org/gmane.comp.version-control.git/285101
[2] http://article.gmane.org/gmane.comp.version-control.git/10093
[3] http://article.gmane.org/gmane.comp.version-control.git/17734
[4] http://article.gmane.org/gmane.comp.version-control.git/18911
[5] http://article.gmane.org/gmane.comp.version-control.git/5617
[6] http://article.gmane.org/gmane.comp.version-control.git/19354
[7] http://article.gmane.org/gmane.comp.version-control.git/103635
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once a lower-priority configuration file defines a clean or smudge
filter, there is no convenient way to override it to produce as-is
output. Even though the configuration mechanism implements "the
last one wins" semantics, you cannot set them to an empty string and
expect them to work, as apply_filter() would try to run the empty
string as an external command and fail. The conversion is not done,
but the function would still report a failure to convert.
Even though resetting the variable to "cat" (i.e. pass the data back
as-is and report success) is an obvious and a viable way to solve
this, it is wasteful to spawn an external process just as a
workaround.
Instead, teach apply_filter() to treat an empty string as a no-op
filter that always returns successfully its input as-is without
conversion.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git shortlog" used to accumulate various pieces of information
regardless of what was asked to be shown in the final output. It
has been optimized by noticing what need not to be collected
(e.g. there is no need to collect the log messages when showing
only the number of changes).
* jk/shortlog:
shortlog: don't warn on empty author
shortlog: optimize out useless string list
shortlog: optimize out useless "<none>" normalization
shortlog: optimize "--summary" mode
shortlog: replace hand-parsing of author with pretty-printer
shortlog: use strbufs to read from stdin
shortlog: match both "Author:" and "author" on stdin
"interpret-trailers" has been taught to optionally update a file in
place, instead of always writing the result to the standard output.
* tk/interpret-trailers-in-place:
interpret-trailers: add option for in-place editing
trailer: allow to write to files other than stdout
The description for SANITY prerequisite the test suite uses has
been clarified both in the comment and in the implementation.
* jk/sanity:
test-lib: clarify and tighten SANITY
A recent optimization to filter-branch in v2.7.0 introduced a
regression when --prune-empty filter is used, which has been
corrected.
* jk/filter-branch-no-index:
filter-branch: resolve $commit^{tree} in no-index case
MSYS2 actually allows to create files or directories whose names contain
tabs, newlines or colors, even if plain Win32 API cannot access them.
As we are using an MSYS2 bash to run the tests, such files or
directories are created successfully, but Git itself has no chance to
work with them because it is a regular Windows program, hence limited by
the Win32 API.
With this change, on Windows otherwise failing tests in
t3300-funny-names.sh, t3600-rm.sh, t3703-add-magic-pathspec.sh,
t3902-quoted.sh, t4016-diff-quote.sh, t4135-apply-weird-filenames.sh,
t9200-git-cvsexportcommit.sh, and t9903-bash-prompt.sh are skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, Git itself has no clue about POSIX paths, but its shell
scripts do. In this instance, we get mixed paths as a result, and when
comparing the path of the author file, we get a mismatch that is
entirely due to the POSIX path vs Windows path clash.
Let's just skip this test so that t9130-git-svn-authors-file.sh passes
in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the permission system works completely differently than
expected by some of the tests. So let's make sure that we do not test
POSIX functionality on Windows.
This lets t9124-git-svn-dcommit-auto-props.sh pass in Git for Windows'
SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows' file systems, file names with trailing dots are forbidden.
The POSIX emulation layer used by Git for Windows' Subversion emulates
those file names, therefore the test adding the file would actually
succeed, but when we would ask git.exe (which does not leverage the
POSIX emulation layer) to check out the tree, it would fail.
Let's just guard the test using a filename that is illegal on Windows
by the MINGW prereq.
This lets t9118-git-svn-funky-branch-names.sh pass in Git for Windows'
SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many a test requires either POSIXPERM (to change the executable bit) or
SYMLINKS, and neither are available on Windows.
This lets t9100-git-svn-basic.sh pass in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The colon is used by check-ignore to separate paths from other output
values. If we use an absolute path, however, on Windows it will be
converted into a Windows path that very much contains a colon.
It is actually not at all necessary to make the path of the global
excludes absolute, so let's just not even do that.
Based on suggestions by Karsten Blees and Junio Hamano.
Suggested-by: Karsten Blees <karsten.blees@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git for Windows' SDK, the tests are run using a Bash that relies on
the POSIX emulation layer MSYS2 (itself a friendly fork of Cygwin). As
such, paths in tests can be POSIX paths. As soon as those paths are
passed to git.exe (which does *not* use the POSIX emulation layer),
those paths are converted into Windows paths, though. This happens
for command-line parameters, but not when reading, say, config variables.
To help with that, the `pwd` command is overridden to return the Windows
path of the current working directory when testing Git on Windows.
However, when talking to anything using the POSIX emulation layer, it is
really much better to use POSIX paths because Windows paths contain a
colon after the drive letter that will easily be mistaken for the common
separator in path lists.
So let's just use the $PWD variable when the POSIX path is needed.
This lets t7800-difftool.sh, t9400-git-cvsserver-server.sh,
t9402-git-cvsserver-refs.sh and t9401-git-cvsserver-crlf.sh pass in Git
for Windows' SDK.
Note: the cvsserver tests require not only the `cvs` package (install
it into Git for Windows' SDK via `pacman -S cvs`) but also the Perl
SQLite bindings (install them into Git for Windows' SDK via
`cpan DBD::SQLite`).
This patch is based on earlier work by 마누엘 and Karsten Blees.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test assumed that there is only one directory separator (the
forward slash), not two equivalent directory separators.
However, on Windows, the back slash and the forward slash *are*
equivalent.
Let's paper over this issue by converting the backward slashes to
forward ones in the test that fails with MSYS2 otherwise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git for Windows, the MSYS2 POSIX emulation layer used by the Bash
converts command-line arguments that looks like they refer to a POSIX
path containing a file list (i.e. @<absolute-path>) into a Windows path
equivalent when calling non-MSYS2 executables, such as git.exe.
Let's just skip the test that uses the parameter `@/at-test` that
confuses the MSYS2 runtime.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git daemon tests create a FIFO first thing and will hang if said
FIFO is not available.
This is a problem with Git for Windows, where `mkfifo` is an MSYS2
program that leverages MSYS2's POSIX emulation layer, but
`git-daemon.exe` is a MINGW program that has not the first clue about
that POSIX emulation layer and therefore blinks twice when it sees
MSYS2's emulated FIFOs and then just stares into space.
This lets t5570-git-daemon.sh and t5811-proto-disable-git.sh pass.
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When help.autocorrect is in effect, an attempt to auto-execute an
uniquely corrected result of a misspelt alias will result in an
irrelevant error message. The codepath that causes this calls
save_env_before_alias() and restore_env() in handle_alias(), and
that happens twice. A global variable orig_cwd is allocated to hold
the return value of getcwd() in save_env_before_alias(), which is
then used in restore_env() to go back to that directory and finally
free(3)'d there.
However, save_env_before_alias() is not prepared to be called twice.
It returns early when it knows it has already been called, leaving
orig_cwd undefined, which is then checked in the second call to
restore_env(), and by that time, the memory that used to hold the
contents of orig_cwd is either freed or reused to hold something
else, and this is fed to chdir(2), causing it to fail. Even if it
did not fail (i.e. reading of the already free'd piece of memory
yielded a directory path that we can chdir(2) to), it then gets
free(3)'d.
Fix this by making sure save_env() does do the saving when called.
While at it, add a minimal test for help.autocorrect facility.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSYS2 (the POSIX emulation layer used by Git for Windows' Bash) actually
has a working mkfifo. The only problem is that it is only emulating
named pipes through the MSYS2 runtime; The Win32 API has no idea about
named pipes, hence the Git executable cannot access those pipes either.
The symptom is that Git fails with a '<name>: No such file or directory'
because MSYS2 emulates named pipes through special-crafted '.lnk' files.
The solution is to tell the test suite explicitly that we cannot use
named pipes when we want to test on Windows.
This lets t4056-diff-order.sh, t9010-svn-fe.sh and t9300-fast-import.sh
pass.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, there are no POSIX paths, only Windows ones (an absolute
Windows path looks like "C:\Program Files\Git\ReleaseNotes.html", under
most circumstances, forward slashes are also allowed and synonymous to
backslashes).
So when a POSIX shell (such as MSYS2's Bash, which is used by Git for
Windows to execute all those shell scripts that are part of Git) passes
a POSIX path to test-path-utils.exe (which is not POSIX-aware), the path
is translated into a Windows path. For example, /etc/profile becomes
C:/Program Files/Git/etc/profile.
This path translation poses a problem when passing the root directory as
parameter to test-path-utils.exe, as it is not well defined whether the
translated root directory should end in a slash or not. MSys1 stripped
the trailing slash, but MSYS2 does not.
Originally, the Git for Windows project patched MSYS2's runtime to
accomodate Git's regression test, but we really should do it the other
way round.
To work with both of MSys1's and MSYS2's behaviors, we simply test what
the current system does in the beginning of t0060-path-utils.sh and then
adjust the expected longest ancestor length accordingly.
It looks quite a bit tricky what we actually do in this patch: first, we
adjust the expected length for the trailing slash we did not originally
expect (subtracting one). So far, so good.
But now comes the part where things work in a surprising way: when the
expected length was 0, the prefix to match is the root directory. If the
root directory is converted into a path with a trailing slash, however,
we know that the logic in longest_ancestor_length() cannot match: to
avoid partial matches of the last directory component, it verifies that
the character after the matching prefix is a slash (but because the
slash was part of the matching prefix, the next character cannot be a
slash). So the return value is -1. Alas, this is exactly what the
expected length is after subtracting the value of $rootslash! So we skip
adding the $rootoff value in that case (and only in that case).
Directories other than the root directory are handled fine (as they are
specified without a trailing slash, something not possible for the root
directory, and MSYS2 converts them into Windows paths that also lack
trailing slashes), therefore we do not need any more special handling.
Thanks to Ray Donnelly for his patient help with this issue.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since baaf233 (connect: improve check for plink to reduce false
positives, 2015-04-26), t5601 writes out a `plink.exe` for testing that
is actually a shell script. So the assumption that the `.exe` extension
implies that the file is *not* a shell script is now wrong.
Since there was no love for the idea of allowing `.exe` files to be
shell scripts on Windows, let's go the other way round: *make*
`plink.exe` a real `.exe`.
This fixes t5601-clone.sh in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we know that mtime on directory as given by the environment
is usable for the purpose of untracked cache, we may want the
untracked cache to be always used without any mtime test or
kernel name check being performed.
Also when we know that mtime is not usable for the purpose of
untracked cache, for example because the repo is shared over a
network file system, we may want the untracked-cache to be
automatically removed from the index.
Allow the user to express such preference by setting the
'core.untrackedCache' configuration variable, which can take
'keep', 'false', or 'true' and default to 'keep'.
When read_index_from() is called, it now adds or removes the
untracked cache in the index to respect the value of this
variable. So it does nothing if the value is `keep` or if the
variable is unset; it adds the untracked cache if the value is
`true`; and it removes the cache if the value is `false`.
`git update-index --[no-|force-]untracked-cache` still adds the
untracked cache to, or removes it, from the index, but this
shows a warning if it goes against the value of
core.untrackedCache, because the next time the index is read
the untracked cache will be added or removed if the
configuration is set to do so.
Also `--untracked-cache` used to check that the underlying
operating system and file system change `st_mtime` field of a
directory if files are added or deleted in that directory. But
because those tests take a long time, `--untracked-cache` no
longer performs them. Instead, there is now
`--test-untracked-cache` to perform the tests. This change
makes `--untracked-cache` the same as `--force-untracked-cache`.
This last change is backward incompatible and should be
mentioned in the release notes.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
read-cache: Duy'sfixup
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous patch, we made sure that the conflict markers themselves
match the end-of-line style of the input files. However, this still left
out the conflicting text itself: if it lacks a trailing newline, we
add one, and should add a carriage return when appropriate, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging files with CR/LF line endings, the conflict markers should
match those, lest the output file has mixed line endings.
This is particularly of interest on Windows, where some editors get
*really* confused by mixed line endings.
The original version of this patch by Beat Bolli respected core.eol, and
a subsequent improvement by this developer also respected gitattributes.
This approach was suboptimal, though: `git merge-file` was invented as a
drop-in replacement for GNU merge and as such has no problem operating
outside of any repository at all!
Another problem with the original approach was pointed out by Junio
Hamano: legacy repositories might have their text files committed using
CR/LF line endings (and core.eol and the gitattributes would give us a
false impression there). Therefore, the much superior approach is to
simply match the context's line endings, if any.
We actually do not have to look at the *entire* context at all: if the
files are all LF-only, or if they all have CR/LF line endings, it is
sufficient to look at just a *single* line to match that style. And if
the line endings are mixed anyway, it is *still* okay to imitate just a
single line's eol: we will just add to the pile of mixed line endings,
and there is nothing we can do about that.
So what we do is: we look at the line preceding the conflict, falling
back to the line preceding that in case it was the last line and had no
line ending, falling back to the first line, first in the first
post-image, then the second post-image, and finally the pre-image.
If we find consistent CR/LF (or undecided) end-of-line style, we match
that, otherwise we use LF-only line endings for the conflict markers.
Note that while it is true that there have to be at least two lines we
can look at (otherwise there would be no conflict), the same is not true
for line *endings*: the three files in question could all consist of a
single line without any line ending, each. In this case we fall back to
using LF-only.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level code that is used to create symbolic references has
been updated to share more code with the code that deals with
normal references.
* jk/symbolic-ref:
lock_ref_sha1_basic: handle REF_NODEREF with invalid refs
lock_ref_sha1_basic: always fill old_oid while holding lock
checkout,clone: check return value of create_symref
create_symref: write reflog while holding lock
create_symref: use existing ref-lock code
create_symref: modernize variable names
"git format-patch" learned to notice format.outputDirectory
configuration variable. This allows "-o <dir>" option to be
omitted on the command line if you always use the same directory in
your workflow.
* ak/format-patch-odir-config:
format-patch: introduce format.outputDirectory configuration
Many codepaths that run "gc --auto" before exiting kept packfiles
mapped and left the file descriptors to them open, which was not
friendly to systems that cannot remove files that are open. They
now close the packs before doing so.
* js/close-packs-before-gc:
receive-pack: release pack files before garbage-collecting
merge: release pack files before garbage-collecting
am: release pack files before garbage-collecting
fetch: release pack files before garbage-collecting
"git pull --rebase" has been extended to allow invoking
"rebase -i".
* js/pull-rebase-i:
completion: add missing branch.*.rebase values
remote: handle the config setting branch.*.rebase=interactive
pull: allow interactive rebase with --rebase=interactive
Since b7cc53e9 (tag.c: use 'ref-filter' APIs, 2015-07-11),
git-tag has started showing tags with ambiguous names (i.e.,
when both "heads/foo" and "tags/foo" exists) as "tags/foo"
instead of just "foo". This is both:
- pointless; the output of "git tag" includes only
refs/tags, so we know that "foo" means the one in
"refs/tags".
and
- ambiguous; in the original output, we know that the line
"foo" means that "refs/tags/foo" exists. In the new
output, it is unclear whether we mean "refs/tags/foo" or
"refs/tags/tags/foo".
The reason this happens is that commit b7cc53e9 switched
git-tag to use ref-filter's "%(refname:short)" output
formatting, which was adapted from for-each-ref. This more
general code does not know that we care only about tags, and
uses shorten_unambiguous_ref to get the short-name. We need
to tell it that we care only about "refs/tags/", and it
should shorten with respect to that value.
In theory, the ref-filter code could figure this out by us
passing FILTER_REFS_TAGS. But there are two complications
there:
1. The handling of refname:short is deep in formatting
code that does not even have our ref_filter struct, let
alone the arguments to the filter_ref struct.
2. In git v2.7.0, we expose the formatting language to the
user. If we follow this path, it will mean that
"%(refname:short)" behaves differently for "tag" versus
"for-each-ref" (including "for-each-ref refs/tags/"),
which can lead to confusion.
Instead, let's add a new modifier to the formatting
language, "strip", to remove a specific set of prefix
components. This fixes "git tag", and lets users invoke the
same behavior from their own custom formats (for "tag" or
"for-each-ref") while leaving ":short" with its same
consistent meaning in all places.
We introduce a test in t7004 for "git tag", which fails
without this patch. We also add a similar test in t3203 for
"git branch", which does not actually fail. But since it is
likely that "branch" will eventually use the same formatting
code, the test helps defend against future regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because this script has to test so many formatters, we have
the nice "test_atom" helper, but we don't use it
consistently. Let's do so. This is shorter, gets rid of some
tests that have their "expected" setup outside of a
test_expect_success block, and lets us organize the changes
better (e.g., putting "refname:short" near "refname").
We also expand the "%(push)" tests a little to match the
"%(upstream)" ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to look up a submodule ref, we use
get_ref_cache(path) to find or auto-create its ref cache.
But if we feed a path that isn't actually a git repository,
we blindly create the ref cache, and then may die deeper in
the code when we try to access it. This is a problem because
many callers speculatively feed us a path that looks vaguely
like a repository, and expect us to tell them when it is
not.
This patch teaches resolve_gitlink_ref to reject
non-repository paths without creating a ref_cache. This
avoids the die(), and also performs better if you have a
large number of these faux-submodule directories (because
the ref_cache lookup is linear, under the assumption that
there won't be a large number of submodules).
To accomplish this, we also break get_ref_cache into two
pieces: the lookup and auto-creation (the latter is lumped
into create_ref_cache). This lets us first cheaply ask our
cache "is it a submodule we know about?" If so, we can avoid
repeating our filesystem lookup. So lookups of real
submodules are not penalized; they examine the submodule's
.git directory only once.
The test in t3000 demonstrates a case where this improves
correctness (we used to just die). The new perf case in
p7300 shows off the speed improvement in an admittedly
pathological repository:
Test HEAD^ HEAD
----------------------------------------------------------------
7300.4: ls-files -o 66.97(66.15+0.87) 0.33(0.08+0.24) -99.5%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A shell script style update to change `command substitution` into
$(command substitution). Coverts contrib/ and much of the t/
directory contents.
* ep/shell-command-substitution-style: (92 commits)
t9901-git-web--browse.sh: use the $( ... ) construct for command substitution
t9501-gitweb-standalone-http-status.sh: use the $( ... ) construct for command substitution
t9350-fast-export.sh: use the $( ... ) construct for command substitution
t9300-fast-import.sh: use the $( ... ) construct for command substitution
t9150-svk-mergetickets.sh: use the $( ... ) construct for command substitution
t9145-git-svn-master-branch.sh: use the $( ... ) construct for command substitution
t9138-git-svn-authors-prog.sh: use the $( ... ) construct for command substitution
t9137-git-svn-dcommit-clobber-series.sh: use the $( ... ) construct for command substitution
t9132-git-svn-broken-symlink.sh: use the $( ... ) construct for command substitution
t9130-git-svn-authors-file.sh: use the $( ... ) construct for command substitution
t9129-git-svn-i18n-commitencoding.sh: use the $( ... ) construct for command substitution
t9119-git-svn-info.sh: use the $( ... ) construct for command substitution
t9118-git-svn-funky-branch-names.sh: use the $( ... ) construct for command substitution
t9114-git-svn-dcommit-merge.sh: use the $( ... ) construct for command substitution
t9110-git-svn-use-svm-props.sh: use the $( ... ) construct for command substitution
t9109-git-svn-multi-glob.sh: use the $( ... ) construct for command substitution
t9108-git-svn-glob.sh: use the $( ... ) construct for command substitution
t9107-git-svn-migrate.sh: use the $( ... ) construct for command substitution
t9105-git-svn-commit-diff.sh: use the $( ... ) construct for command substitution
t9104-git-svn-follow-parent.sh: use the $( ... ) construct for command substitution
...
"git grep" by default does not fall back to its "--no-index"
behaviour outside a directory under Git's control (otherwise the
user may by mistake end up running a huge recursive search); with a
new configuration (set in $HOME/.gitconfig--by definition this
cannot be set in the config file per project), this safety can be
disabled.
* tg/grep-no-index-fallback:
builtin/grep: add grep.fallbackToNoIndex config
t7810: correct --no-index test
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
"git reflog" incorrectly assumed that all objects that used to be
at the tip of a ref must be commits, which caused it to segfault.
* dk/reflog-walk-with-non-commit:
reflog-walk: don't segfault on non-commit sha1's in the reflog
"git send-email" was confused by escaped quotes stored in the alias
files saved by "mutt", which has been corrected.
* ew/send-email-mutt-alias-fix:
git-send-email: do not double-escape quotes from mutt
d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like
$GIT_DIR, 2015-06-26) attempted to work around a glitch in alias
handling by overwriting GIT_WORK_TREE environment variable to
affect subprocesses when set_git_work_tree() gets called, which
resulted in a rather unpleasant regression to "clone" and "init".
Try to address the same issue by always restoring the environment
and respawning the real underlying command when handling alias.
* nd/clear-gitenv-upon-use-of-alias:
run-command: don't warn on SIGPIPE deaths
git.c: make sure we do not leak GIT_* to alias scripts
setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when ..
git.c: make it clear save_env() is for alias handling only
Some "git notes" operations, e.g. "git log --notes=<note>", should
be able to read notes from any tree-ish that is shaped like a notes
tree, but the notes infrastructure required that the argument must
be a ref under refs/notes/. Loosen it to require a valid ref only
when the operation would update the notes (in which case we must
have a place to store the updated notes tree, iow, a ref).
* mh/notes-allow-reading-treeish:
notes: allow treeish expressions as notes ref
Commit 348d4f2 (filter-branch: skip index read/write when
possible, 2015-11-06) taught filter-branch to optimize out
the final "git write-tree" when we know we haven't touched
the tree with any of our filters. It does by simply putting
the literal text "$commit^{tree}" into the "$tree" variable,
avoiding a useless rev-parse call.
However, when we pass this to git_commit_non_empty_tree(),
it gets confused; it resolves "$commit^{tree}" itself, and
compares our string to the 40-hex sha1, which obviously
doesn't match. As a result, "--prune-empty" (or any custom
filter using git_commit_non_empty_tree) will fail to drop
an empty commit (when filter-branch is used without a tree
or index filter).
Let's resolve $tree to the 40-hex ourselves, so that
git_commit_non_empty_tree can work. Unfortunately, this is a
bit slower due to the extra process overhead:
$ cd t/perf && ./run 348d4f2 HEAD p7000-filter-branch.sh
[...]
Test 348d4f2 HEAD
--------------------------------------------------------------
7000.2: noop filter 3.76(0.24+0.26) 4.54(0.28+0.24) +20.7%
We could try to make git_commit_non_empty_tree more clever.
However, the value of $tree here is technically
user-visible. The user can provide arbitrary shell code at
this stage, which could itself have a similar assumption to
what is in git_commit_non_empty_tree. So the conservative
choice to fix this regression is to take the 20% hit and
give the pre-348d4f2 behavior. We still end up much faster
than before the optimization:
$ cd t/perf && ./run 348d4f2^ HEAD p7000-filter-branch.sh
[...]
Test 348d4f2^ HEAD
--------------------------------------------------------------
7000.2: noop filter 9.51(4.32+0.40) 4.51(0.28+0.23) -52.6%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f400e51c (test-lib.sh: set prerequisite SANITY by testing what we
really need, 2015-01-27) improved the way SANITY prerequisite was
determined, but made the resulting code (incorrectly) imply that
SANITY is all about effects of permission bits of the containing
directory has on the files contained in it by the comment it added,
its log message and the actual tests.
State what SANITY is about more clearly in the comment, and test
that a file whose permission bits says should be unreadble truly
cannot be read.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it's useful to know the main branch of a git repository
without actually downloading the repository. This can be done by
looking at the symrefs stored in the remote repository. Currently git
doesn't provide a simple way to show the symrefs stored on the remote
repository, even though the information is available. Add a --symref
command line argument to the ls-remote command, which shows the symrefs
in the remote repository.
While there, replace a literal tab in the format string with \t to make
it more obvious to the reader.
Suggested-by: pedro rijo <pedrorijo91@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git tries to avoid creating a commit with an empty author
name or email. However, commits created by older, less
strict versions of git may still be in the history. There's
not much point in issuing a warning to stderr for an empty
author. The user can't do anything about it now, and we are
better off to simply include it in the shortlog output as an
empty name/email, and let the caller process it however they
see fit.
Older versions of shortlog differentiated between "author
header not present" (which complained) and "author
name/email are blank" (which included the empty ident in the
output). But since switching to format_commit_message, we
complain to stderr about either case (linux.git has a blank
author deep in its history which triggers this).
We could try to restore the older behavior (complaining only
about the missing header), but in retrospect, there's not
much point in differentiating these cases. A missing
author header is bogus, but as for the "blank" case, the
only useful behavior is to add it to the "empty name"
collection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shortlog could read both the normal "git
log" output as well as "git log --format=raw". However, when
it was converted to C by b8ec592 (Build in shortlog,
2006-10-22), the trailing colon became mandatory, and we no
longer matched the raw output.
Given the amount of intervening time without any bug
reports, it's probable that nobody cares. But it's
relatively easy to fix, and the end result is hopefully more
readable than the original.
Note that this no longer matches "author: ", which we did
before, but that has never been a format generated by git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in a cross-platform environment, a user may want to
check if text files are stored normalized in the repository and
if .gitattributes are set appropriately.
Make it possible to let Git show the line endings in the index and
in the working tree and the effective text/eol attributes.
The end of line ("eolinfo") are shown like this:
"-text" binary (or with bare CR) file
"none" text file without any EOL
"lf" text file with LF
"crlf" text file with CRLF
"mixed" text file with mixed line endings.
The effective text/eol attribute is one of these:
"", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf"
git ls-files --eol gives an output like this:
i/none w/none attr/text=auto t/t5100/empty
i/-text w/-text attr/-text t/test-binary-2.png
i/lf w/lf attr/text eol=lf t/t5100/rfc2047-info-0007
i/lf w/crlf attr/text eol=crlf doit.bat
i/mixed w/mixed attr/ locale/XX.po
to show what eol convention is used in the data in the index ('i'),
and in the working tree ('w'), and what attribute is in effect,
for each path that is shown.
Add test cases in t0027.
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new expansion function, expand_loose_notes_ref which will first
check whether the ref can be found using get_sha1. If it can't be found
then it will fallback to using expand_notes_ref. The content of the
strbuf will not be changed if the notes ref can be located using
get_sha1. Otherwise, it may be updated as done by expand_notes_ref.
Since we now support merging from non-notes refs, remove the test case
associated with that behavior. Add a test case for merging from a
non-notes ref.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line option --in-place to support in-place editing akin to
sed -i. This allows to write commands like the following:
git interpret-trailers --trailer "X: Y" a.txt > b.txt && mv b.txt a.txt
in a more concise way:
git interpret-trailers --trailer "X: Y" --in-place a.txt
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of years ago, I found the need to collaborate on topic
branches that were rebased all the time, and I really needed to see
what I was rebasing when pulling, so I introduced an
interactively-rebasing pull.
The way builtin pull works, this change also supports the value
'interactive' for the 'branch.<name>.rebase' config variable, which
is a neat thing because users can now configure given branches for
interactively-rebasing pulls without having to type out the complete
`--rebase=interactive` option every time they pull.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
This fixes https://github.com/git-for-windows/git/issues/500
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After changing the type of a file in the git repository, it is not possible to
"git p4 publish" the commit to perforce. This is due to the fact that the git
"T" status is not handled in git-p4.py. This can typically occur when replacing
an existing file with a symbolic link.
The "T" modifier is now supported in git-p4.py. When a file type has changed,
inform perforce with the "p4 edit -f auto" command.
Signed-off-by: Romain Picard <romain.picard@oakbits.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes call lock_ref_sha1_basic with REF_NODEREF
to operate directly on a symbolic ref. This is used, for
example, to move to a detached HEAD, or when updating
the contents of HEAD via checkout or symbolic-ref.
However, the first step of the function is to resolve the
refname to get the "old" sha1, and we do so without telling
resolve_ref_unsafe() that we are only interested in the
symref. As a result, we may detect a problem there not with
the symref itself, but with something it points to.
The real-world example I found (and what is used in the test
suite) is a HEAD pointing to a ref that cannot exist,
because it would cause a directory/file conflict with other
existing refs. This situation is somewhat broken, of
course, as trying to _commit_ on that HEAD would fail. But
it's not explicitly forbidden, and we should be able to move
away from it. However, neither "git checkout" nor "git
symbolic-ref" can do so. We try to take the lock on HEAD,
which is pointing to a non-existent ref. We bail from
resolve_ref_unsafe() with errno set to EISDIR, and the lock
code thinks we are attempting to create a d/f conflict.
Of course we're not. The problem is that the lock code has
no idea what level we were at when we got EISDIR, so trying
to diagnose or remove empty directories for HEAD is not
useful.
To make things even more complicated, we only get EISDIR in
the loose-ref case. If the refs are packed, the resolution
may "succeed", giving us the pointed-to ref in "refname",
but a null oid. Later, we say "ah, the null oid means we are
creating; let's make sure there is room for it", but
mistakenly check against the _resolved_ refname, not the
original.
We can fix this by making two tweaks:
1. Call resolve_ref_unsafe() with RESOLVE_REF_NO_RECURSE
when REF_NODEREF is set. This means any errors
we get will be from the orig_refname, and we can act
accordingly.
We already do this in the REF_DELETING case, but we
should do it for update, too.
2. If we do get a "refname" return from
resolve_ref_unsafe(), even with RESOLVE_REF_NO_RECURSE
it may be the name of the ref pointed-to by a symref.
We already normalize this back to orig_refname before
taking the lockfile, but we need to do so before the
null_oid check.
While we're rearranging the REF_NODEREF handling, we can
also bump the initialization of lflags to the top of the
function, where we are setting up other flags. This saves us
from having yet another conditional block on REF_NODEREF
just to set it later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.
Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.
* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr
An earlier change in 2.5.x-era broke users' hooks and aliases by
exporting GIT_WORK_TREE to point at the root of the working tree,
interfering when they tried to use a different working tree without
setting GIT_WORK_TREE environment themselves.
* nd/stop-setenv-work-tree:
Revert "setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR"
init_notes() is the main point of entry to the notes API. It ensures
that the input can be used as ref, because it needs a ref to update to
store notes tree after modifying it.
There however are many use cases where notes tree is only read, e.g.
"git log --notes=...". Any notes-shaped treeish could be used for such
purpose, but it is not allowed due to existing restriction.
Allow treeish expressions to be used in the case the notes tree is going
to be used without write "permissions". Add a flag to distinguish
whether the notes tree is intended to be used read-only, or will be
updated.
With this change, operations that use notes read-only can be fed any
notes-shaped tree-ish can be used, e.g. git log --notes=notes@{1}.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unlikely that we would fail to create or update a
symbolic ref (especially HEAD), but if we do, we should
notice and complain. Note that there's no need to give more
details in our error message; create_symref will already
have done so.
While we're here, let's also fix a minor memory leak in
clone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, some libgen implementations yield outcomes different
from what Git expects. For example, mingw-w64-crt provides a basename()
function, that shortens `path0/` to `path`!
So let's verify that the basename() and dirname() functions we use
conform to what Git expects.
Derived-from-code-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_CEILING_DIRECTORIES doesn't prevent chdir up into another directory
while looking for a repository directory if it is equal to the current
directory. Because of this, the test which claims to test the git grep
--no-index command outside of a repository actually tests it inside of a
repository. The test_must_fail assertions still pass because the git
grep only looks at untracked files and therefore no file matches, but
not because it's run outside of a repository as it was originally
intended.
Set the GIT_CEILING_DIRECTORIES environment variable to the parent
directory of the directory in which the git grep command is executed, to
make sure it is actually run outside of a git repository.
In addition, the && chain was broken in a couple of places in the same
test, fix that.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of extending this behaviour, add tests verifying the
handling of exclamation marks when looking up a commit "by name".
Specifically, as documented: '<rev>^{/!Message}' should fail, as the '!'
prefix is reserved; while '<rev>^{!!Message}' should search for a commit
whose message contains the string "!Message".
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 57534ee77d. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.
[1] http://article.gmane.org/gmane.comp.version-control.git/283520
[2] http://article.gmane.org/gmane.comp.version-control.git/283532
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git reflog (ab)uses the log machinery to display its list of log
entries. To do so it must fake commit parent information for the log
walker.
For refs in refs/heads this is no problem, as they should only ever
point to commits. Tags and other refs however can point to anything,
thus their reflog may contain non-commit objects.
To avoid segfaulting, we check whether reflog entries are commits before
feeding them to the log walker and skip any non-commits. This means that
git reflog output will be incomplete for such refs, but that's one step
up from segfaulting. A more complete solution would be to decouple git
reflog from the log walker machinery.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git replace --edit' should error out when the invoked editor fails,
but the test checking this behavior would not notice if this weren't
the case.
The test in question, ever since it was added in 85f98fc037
(replace: add tests for --edit, 2014-05-17), has simulated a failing
editor in an unconventional way:
test_must_fail env GIT_EDITOR='./fakeeditor;false' git replace --edit
I presume the reason for this unconventional editor was the fact that
'git replace --edit' requires the edited object to be different from
the original, but a mere 'false' as editor would leave the object
unchanged and 'git replace --edit' would error out anyway complaining
about the new and the original object files being the same. Running
'fakeeditor' before 'false' was supposed to ensure that the object
file is modified and thus 'git replace --edit' errors out because of
the failed editor.
However, this editor doesn't actually modify the edited object,
because start_command() turns this editor into:
/bin/sh -c './fakeeditor;false "$@"' './fakeeditor;false' \
'.../.git/REPLACE_EDITOBJ'
This means that the test's fakeeditor script doesn't even get the path
of the object to be edited as argument, triggering error messages from
the commands executed inside the script ('sed' and 'mv'), and
ultimately leaving the object file unchanged.
If a patch were to remove the die() from the error path after
launch_editor(), the test would not catch it, because 'git replace'
would continue execution past launch_editor() and would error out a
bit later due to the unchanged edited object. Though 'git replace'
would error out for the wrong reason, this would satisfy
'test_must_fail' just as well, and the test would succeed leaving the
undesired change unnoticed.
Create a proper failing fake editor script for this test to ensure
that the edited object is in fact modified and 'git replace --edit'
won't error out because the new and original object files are the
same.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mutt saves aliases with escaped quotes in the form of:
alias dot \"Dot U. Sir\" <somebody@example.org>
When we pass through our sanitize_address routine,
we end up with double-escaping:
To: "\\\"Dot U. Sir\\\" <somebody@example.org>
Remove the escaping in mutt only for now, as I am not sure
if other mailers can do this or if this is better fixed in
sanitize_address.
Cc: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Cc: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The create_symref() function predates the existence of
"struct lock_file", let alone the more recent "struct
ref_lock". Instead, it just does its own manual dot-locking.
Besides being more code, this has a few downsides:
- if git is interrupted while holding the lock, we don't
clean up the lockfile
- we don't do the usual directory/filename conflict check.
So you can sometimes create a symref "refs/heads/foo/bar",
even if "refs/heads/foo" exists (namely, if the refs are
packed and we do not hit the d/f conflict in the
filesystem).
This patch refactors create_symref() to use the "struct
ref_lock" interface, which handles both of these things.
There are a few bonus cleanups that come along with it:
- we leaked ref_path in some error cases
- the symref contents were stored in a fixed-size buffer,
putting an artificial (albeit large) limitation on the
length of the refname. We now write through fprintf, and
handle refnames of any size.
- we called adjust_shared_perm only after the file was
renamed into place, creating a potential race with
readers in a shared repository. The lockfile code now
handles this when creating the lockfile, making it
atomic.
- the legacy prefer_symlink_refs path did not do any
locking at all. Admittedly, it is not atomic from a
reader's perspective (as it unlinks and re-creates the
symlink to overwrite), but at least it cannot conflict
with other writers now.
- the result of this patch is hopefully more readable. It
eliminates three goto labels. Two were for error checking
that is now simplified, and the third was to reach shared
code that has been pulled into its own function.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" when interacting with multiple depots at the same time
used to incorrectly drop changes.
* sh/p4-multi-depot:
git-p4: reduce number of server queries for fetches
git-p4: support multiple depot paths in p4 submit
git-p4: failing test case for skipping changes with multiple depots
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of making the shell expand 00* and invoke 'echo' with it,
and then capturing its output as command substitution, just use
the result of expanding 00* directly.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unfortunate commit d95138e (setup: set env $GIT_WORK_TREE when
work tree is set, like $GIT_DIR - 2015-06-26) exposes another problem,
besides git-clone that's described in the previous commit. If
GIT_WORK_TREE (or even GIT_DIR) is exported to an alias script, it may
mislead git commands in the script where the repo is. Granted, most
scripts work on the repo where the alias is summoned from. But nowhere
do we forbid the script to visit another repository.
The revert of d95138e in the previous commit is sufficient as a
fix. However, to protect us from accidentally leaking GIT_*
environment variables again, we restore certain sensitive env before
calling the external script.
GIT_PREFIX is let through because there's another setup side effect
that we simply accepted so far: current working directory is
moved. Maybe in future we can introduce a new alias format that
guarantees no cwd move, then we can unexport GIT_PREFIX.
Reported-by: Gabriel Ganne <gabriel.ganne@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d95138e [1] attempted to fix a .git file problem by
setting GIT_WORK_TREE whenever GIT_DIR is set. It sounded harmless
because we handle GIT_DIR and GIT_WORK_TREE side by side for most
commands, with two exceptions: git-init and git-clone.
"git clone" is not happy with d95138e. This command ignores GIT_DIR
but respects GIT_WORK_TREE [2] [3] which means it used to run fine
from a hook, where GIT_DIR was set but GIT_WORK_TREE was not (*).
With d95138e, GIT_WORK_TREE is set all the time and git-clone
interprets that as "I give you order to put the worktree here",
usually against the user's intention.
The solution in d95138e is reverted earlier, and instead we reuse
the solution from c056261 [4]. It fixed another setup-messed-
up-by-alias by saving and restoring env and spawning a new process,
but for git-clone and git-init only.
Now we conclude that setup-messed-up-by-alias is always evil. So the
env restoration is done for _all_ commands, including external ones,
whenever aliases are involved. It fixes what d95138e tried to fix,
without upsetting git-clone-inside-hooks.
The test from d95138e remains to verify it's not broken by this. A new
test is added to make sure git-clone-inside-hooks remains happy.
(*) GIT_WORK_TREE was not set _most of the time_. In some cases
GIT_WORK_TREE is set and git-clone will behave differently. The
use of GIT_WORK_TREE to direct git-clone to put work tree
elsewhere looks like a mistake because it causes surprises this
way. But that's a separate story.
[1] d95138e (setup: set env $GIT_WORK_TREE when work tree is set, like
$GIT_DIR - 2015-06-26)
[2] 2beebd2 (clone: create intermediate directories of destination
repo - 2008-06-25)
[3] 20ccef4 (make git-clone GIT_WORK_TREE aware - 2007-07-06)
[4] c056261 (git potty: restore environments after alias expansion -
2014-06-08)
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
