Casting a 'struct object' to 'struct commit' is unnecessary there,
because it's already available in the local 'commit' variable.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_name_rev() basically open-codes strip_suffix() before adding a
string to a strbuf.
Let's use the strbuf right from the beginning, i.e. add the whole
string to the strbuf and then use strbuf_strip_suffix(), making the
code more idiomatic.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were leaking memory by not clearing `other_arg` after we were done
using it. Clear it after we've finished using it.
Note that this isn't strictly necessary since the memory will be
reclaimed once the command exits. However, since we are releasing the
strbufs, we should also clear `other_arg` for consistency.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
In v2.15.4, we started to reject `submodule.update` settings in
`.gitmodules`. Let's raise a BUG if it somehow still made it through
from anywhere but the Git config.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
"git submodule status" that is run from a subdirectory of the
superproject did not work well, which has been corrected.
* mg/submodule-status-from-a-subdirectory:
submodule: fix 'submodule status' when called from a subdirectory
"git reset --patch $object" without any pathspec should allow a
tree object to be given, but incorrectly required a committish,
which has been corrected.
* nl/reset-patch-takes-a-tree:
reset: parse rev as tree-ish in patch mode
"git rev-parse --show-toplevel" run outside of any working tree did
not error out, which has been corrected.
* jk/fail-show-toplevel-outside-working-tree:
rev-parse: make --show-toplevel without a worktree an error
"git unpack-objects" used to show progress based only on the number
of received and unpacked objects, which stalled when it has to
handle an unusually large object. It now shows the throughput as
well.
* sg/unpack-progress-throughput:
builtin/unpack-objects.c: show throughput progress
"git range-diff" learned to take the "--notes=<ref>" and the
"--no-notes" options to control the commit notes included in the
log message that gets compared.
* dl/range-diff-with-notes:
format-patch: pass notes configuration to range-diff
range-diff: pass through --notes to `git log`
range-diff: output `## Notes ##` header
t3206: range-diff compares logs with commit notes
t3206: s/expected/expect/
t3206: disable parameter substitution in heredoc
t3206: remove spaces after redirect operators
pretty-options.txt: --notes accepts a ref instead of treeish
rev-list-options.txt: remove reference to --show-notes
argv-array: add space after `while`
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
Currently it is technically possible to let a submodule's git
directory point right into the git dir of a sibling submodule.
Example: the git directories of two submodules with the names `hippo`
and `hippo/hooks` would be `.git/modules/hippo/` and
`.git/modules/hippo/hooks/`, respectively, but the latter is already
intended to house the former's hooks.
In most cases, this is just confusing, but there is also a (quite
contrived) attack vector where Git can be fooled into mistaking remote
content for file contents it wrote itself during a recursive clone.
Let's plug this bug.
To do so, we introduce the new function `validate_submodule_git_dir()`
which simply verifies that no git dir exists for any leading directories
of the submodule name (if there are any).
Note: this patch specifically continues to allow sibling modules names
of the form `core/lib`, `core/doc`, etc, as long as `core` is not a
submodule name.
This fixes CVE-2019-1387.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With `format.useAutoBase = true`, running rebase resulted in an
error:
fatal: failed to get upstream, if you want to record base commit automatically,
please use git branch --set-upstream-to to track a remote branch.
Or you could specify base commit by --base=<base-commit-id> manually
error:
git encountered an error while preparing the patches to replay
these revisions:
ede2467cdedc63784887b587a61c36b7850ebfac..d8f581194799ae29bf5fa72a98cbae98a1198b12
As a result, git cannot rebase them.
Fix this by always passing `--no-base` to format-patch from rebase so
that the effect of `format.useAutoBase` is negated.
Reported-by: Christian Biesinger <cbiesinger@google.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If `format.useAutoBase = true`, there was no way to override this from
the command-line. Teach the `--no-base` option in format-patch to
override `format.useAutoBase`.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected.
2) It is not allowed to pass pathspec in both args and file.
`you must specify path(s) to restore` block was moved down to be able to
test for `pathspec.nr` instead, because testing for `argc` is no longer
correct.
`git switch` does not support the new options because it doesn't expect
`<pathspec>` arguments.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--interactive/--patch/--edit`, even when <file> is not `stdin`.
Such use case it not really expected. Also, it would require changes
to `interactive_add()` and `edit_patch()`.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some code blocks were moved down to be able to test for `pathspec.nr`
in the next patch. Blocks are moved as is without any changes. This
is done as separate patch to reduce the amount of diffs in next patch.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to preventing `.git` from being tracked by Git, on Windows
we also have to prevent `git~1` from being tracked, as the default NTFS
short name (also known as the "8.3 filename") for the file name `.git`
is `git~1`, otherwise it would be possible for malicious repositories to
write directly into the `.git/` directory, e.g. a `post-checkout` hook
that would then be executed _during_ a recursive clone.
When we implemented appropriate protections in 2b4c6efc82 (read-cache:
optionally disallow NTFS .git variants, 2014-12-16), we had analyzed
carefully that the `.git` directory or file would be guaranteed to be
the first directory entry to be written. Otherwise it would be possible
e.g. for a file named `..git` to be assigned the short name `git~1` and
subsequently, the short name generated for `.git` would be `git~2`. Or
`git~3`. Or even `~9999999` (for a detailed explanation of the lengths
we have to go to protect `.gitmodules`, see the commit message of
e7cb0b4455 (is_ntfs_dotgit: match other .git files, 2018-05-11)).
However, by exploiting two issues (that will be addressed in a related
patch series close by), it is currently possible to clone a submodule
into a non-empty directory:
- On Windows, file names cannot end in a space or a period (for
historical reasons: the period separating the base name from the file
extension was not actually written to disk, and the base name/file
extension was space-padded to the full 8/3 characters, respectively).
Helpfully, when creating a directory under the name, say, `sub.`, that
trailing period is trimmed automatically and the actual name on disk
is `sub`.
This means that while Git thinks that the submodule names `sub` and
`sub.` are different, they both access `.git/modules/sub/`.
- While the backslash character is a valid file name character on Linux,
it is not so on Windows. As Git tries to be cross-platform, it
therefore allows backslash characters in the file names stored in tree
objects.
Which means that it is totally possible that a submodule `c` sits next
to a file `c\..git`, and on Windows, during recursive clone a file
called `..git` will be written into `c/`, of course _before_ the
submodule is cloned.
Note that the actual exploit is not quite as simple as having a
submodule `c` next to a file `c\..git`, as we have to make sure that the
directory `.git/modules/b` already exists when the submodule is checked
out, otherwise a different code path is taken in `module_clone()` that
does _not_ allow a non-empty submodule directory to exist already.
Even if we will address both issues nearby (the next commit will
disallow backslash characters in tree entries' file names on Windows,
and another patch will disallow creating directories/files with trailing
spaces or periods), it is a wise idea to defend in depth against this
sort of attack vector: when submodules are cloned recursively, we now
_require_ the directory to be empty, addressing CVE-2019-1349.
Note: the code path we patch is shared with the code path of `git
submodule update --init`, which must not expect, in general, that the
directory is empty. Hence we have to introduce the new option
`--force-init` and hand it all the way down from `git submodule` to the
actual `git submodule--helper` process that performs the initial clone.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When recursively cloning a superproject with some shallow modules
defined in its .gitmodules, then recloning with "--reference=<path>", an
error occurs. For example:
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
master
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
--reference master master2
fails with:
fatal: submodule '<snip>' cannot add alternate: reference repository
'<snip>' is shallow
When a alternate computed from the superproject's alternate cannot be
added, whether in this case or another, advise about configuring the
"submodule.alternateErrorStrategy" configuration option and using
"--reference-if-able" instead of "--reference" when cloning.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" codepath had a big "do not lazily fetch missing objects
when I ask if something exists" switch. This has been corrected by
marking the "does this thing exist?" calls with "if not please do not
lazily fetch it" flag.
* jt/fetch-remove-lazy-fetch-plugging:
promisor-remote: remove fetch_if_missing=0
clone: remove fetch_if_missing=0
fetch: remove fetch_if_missing=0
Recent update to "git stash pop" made the command empty the index
when run with the "--quiet" option, which has been corrected.
* tg/stash-refresh-index:
stash: make sure we have a valid index before writing it
"git bundle" has been taught to use the parse options API. "git
bundle verify" learned "--quiet" and "git bundle create" learned
options to control the progress output.
* rj/bundle-ui-updates:
bundle-verify: add --quiet
bundle-create: progress output control
bundle: framework for options before bundle file
Docfix.
* en/doc-typofix:
Fix spelling errors in no-longer-updated-from-upstream modules
multimail: fix a few simple spelling errors
sha1dc: fix trivial comment spelling error
Fix spelling errors in test commands
Fix spelling errors in messages shown to users
Fix spelling errors in names of tests
Fix spelling errors in comments of testcases
Fix spelling errors in code comments
Fix spelling errors in documentation outside of Documentation/
Documentation: fix a bunch of typos, both old and new
Fetching from multiple remotes into the same repository in parallel
had a bad interaction with the recent change to (optionally) update
the commit-graph after a fetch job finishes, as these parallel
fetches compete with each other. Which has been corrected.
* js/fetch-multi-lockfix:
fetch: avoid locking issues between fetch.jobs/fetch.writeCommitGraph
fetch: add the command-line option `--write-commit-graph`
"git worktree add" internally calls "reset --hard" that should not
descend into submodules, even when submodule.recurse configuration
is set, but it was affected. This has been corrected.
* pb/no-recursive-reset-hard-in-worktree-add:
worktree: teach "add" to ignore submodule.recurse config
Crufty code and logic accumulated over time around the object
parsing and low-level object access used in "git fsck" have been
cleaned up.
* jk/cleanup-object-parsing-and-fsck: (23 commits)
fsck: accept an oid instead of a "struct tree" for fsck_tree()
fsck: accept an oid instead of a "struct commit" for fsck_commit()
fsck: accept an oid instead of a "struct tag" for fsck_tag()
fsck: rename vague "oid" local variables
fsck: don't require an object struct in verify_headers()
fsck: don't require an object struct for fsck_ident()
fsck: drop blob struct from fsck_finish()
fsck: accept an oid instead of a "struct blob" for fsck_blob()
fsck: don't require an object struct for report()
fsck: only require an oid for skiplist functions
fsck: only provide oid/type in fsck_error callback
fsck: don't require object structs for display functions
fsck: use oids rather than objects for object_name API
fsck_describe_object(): build on our get_object_name() primitive
fsck: unify object-name code
fsck: require an actual buffer for non-blobs
fsck: stop checking tag->tagged
fsck: stop checking commit->parent counts
fsck: stop checking commit->tree value
commit, tag: don't set parsed bit for parse failures
...
This commit refactors the use of verify_signed_buffer() outside of
gpg-interface.c to use check_signature() instead. It also turns
verify_signed_buffer() into a file-local function since it's now only
invoked internally by check_signature().
There were previously two globally scoped functions used in different
parts of Git to perform GPG signature verification:
verify_signed_buffer() and check_signature(). Now only
check_signature() is used.
The verify_signed_buffer() function doesn't guard against duplicate
signatures as described by Michał Górny [1]. Instead it only ensures a
non-erroneous exit code from GPG and the presence of at least one
GOODSIG status field. This stands in contrast with check_signature()
that returns an error if more than one signature is encountered.
The lower degree of verification makes the use of verify_signed_buffer()
problematic if callers don't parse and validate the various parts of the
GPG status message themselves. And processing these messages seems like
a task that should be reserved to gpg-interface.c with the function
check_signature().
Furthermore, the use of verify_signed_buffer() makes it difficult to
introduce new functionality that relies on the content of the GPG status
lines.
Now all operations that does signature verification share a single entry
point to gpg-interface.c. This makes it easier to propagate changed or
additional functionality in GPG signature verification to all parts of
Git, without having odd edge-cases that don't perform the same degree of
verification.
[1] https://dev.gentoo.org/~mgorny/articles/attack-on-git-signature-verification.html
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let skip_prefix() advance refname to get rid of two magic numbers.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of a magic number by using skip_prefix().
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of two magic numbers by using skip_prefix().
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of magic numbers by letting skip_prefix() set the pointer
"what".
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the way the `--reset-author-date` option is described,
and mark its usage string translatable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `git submodule status` while in a subdirectory, we are
incorrectly not detecting modified submodules and
thus reporting that all of the submodules are unchanged.
This is because the submodule helper is calling `diff-index` with the
submodule path assuming the path is relative to the current prefix
directory, however the submodule path used is actually relative to the root.
Always pass NULL as the `prefix` when running diff-files on the
submodule, to make sure the submodule's path is interpreted as relative
to the superproject's repository root.
Signed-off-by: Manish Goregaokar <manishsmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sequencer_continue() is called by complete_action(), `opts' has
been filled by get_replay_opts(). Currently, it does not initialise the
`squash_onto' field (used by the `--root' mode), only
read_populate_opts() does. It’s not a problem yet since
sequencer_continue() calls it before pick_commits(), but it would lead
to incorrect results once complete_action() is modified to call
pick_commits() directly.
Let’s change that.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 2f328c3d ("reset $sha1 $pathspec: require $sha1 only to be
treeish", 2013-01-14), we allowed "git reset $object -- $path" to reset
individual paths that match the pathspec to take the blob from a tree
object, not necessarily a commit, while the form to reset the tip of the
current branch to some other commit still must be given a commit.
Like resetting with paths, "git reset --patch" does not update HEAD, and
need not require a commit. The path-filtered form, "git reset --patch
$object -- $pathspec", has accepted a tree-ish since 2f328c3d.
"git reset --patch" is documented as accepting a <tree-ish> since
bf44142f ("reset: update documentation to require only tree-ish with
paths", 2013-01-16). Documentation changes are not required.
Loosen the restriction that requires a commit for the unfiltered "git
reset --patch $object".
Signed-off-by: Nika Layzell <nika@thelayzells.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-merge performed by 'git sparse-checkout' will erase any staged
changes, which can lead to data loss. Prevent these attempts by requiring
a clean 'git status' output.
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout init' subcommand previously wrote directly
to the sparse-checkout file and then updated the working directory.
This may fail if there are modified files not included in the initial
pattern set. However, that left a populated sparse-checkout file.
Use the in-process working directory update to guarantee that the
init subcommand only changes the sparse-checkout file if the working
directory update succeeds.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If two 'git sparse-checkout set' subcommands are launched at the
same time, the behavior can be unexpected as they compete to write
the sparse-checkout file and update the working directory.
Take a lockfile around the writes to the sparse-checkout file. In
addition, acquire this lock around the working directory update
to avoid two commands updating the working directory in different
ways.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout disable' subcommand returns a user to a
full working directory. The old process for doing this required
updating the sparse-checkout file with the "/*" pattern and then
updating the working directory with core.sparseCheckout enabled.
Finally, the sparse-checkout file could be removed and the config
setting disabled.
However, it is valuable to keep a user's sparse-checkout file
intact so they can re-enable the sparse-checkout they previously
used with 'git sparse-checkout init'. This is now possible with
the in-process mechanism for updating the working directory.
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout builtin used 'git read-tree -mu HEAD' to update the
skip-worktree bits in the index and to update the working directory.
This extra process is overly complex, and prone to failure. It also
requires that we write our changes to the sparse-checkout file before
trying to update the index.
Remove this extra process call by creating a direct call to
unpack_trees() in the same way 'git read-tree -mu HEAD' does. In
addition, provide an in-memory list of patterns so we can avoid
reading from the sparse-checkout file. This allows us to test a
proposed change to the file before writing to it.
An earlier version of this patch included a bug when the 'set' command
failed due to the "Sparse checkout leaves no entry on working directory"
error. It would not rollback the index.lock file, so the replay of the
old sparse-checkout specification would fail. A test in t1091 now
covers that scenario.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user provides folders A/ and A/B/ for inclusion in a cone-mode
sparse-checkout file, the parsing logic will notice that A/ appears
both as a "parent" type pattern and as a "recursive" type pattern.
This is unexpected and hence will complain via a warning and revert
to the old logic for checking sparse-checkout patterns.
Prevent this from happening accidentally by sanitizing the folders
for this type of inclusion in the 'git sparse-checkout' builtin.
This happens in two ways:
1. Do not include any parent patterns that also appear as recursive
patterns.
2. Do not include any recursive patterns deeper than other recursive
patterns.
In order to minimize duplicate code for scanning parents, create
hashmap_contains_parent() method. It takes a strbuf buffer to
avoid reallocating a buffer when calling in a tight loop.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the cone pattern set easy to use, update the behavior of
'git sparse-checkout (init|set)'.
Add '--cone' flag to 'git sparse-checkout init' to set the config
option 'core.sparseCheckoutCone=true'.
When running 'git sparse-checkout set' in cone mode, a user only
needs to supply a list of recursive folder matches. Git will
automatically add the necessary parent matches for the leading
directories.
When testing 'git sparse-checkout set' in cone mode, check the
error stream to ensure we do not see any errors. Specifically,
we want to avoid the warning that the patterns do not match
the cone-mode patterns.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The instructions for disabling a sparse-checkout to a full
working directory are complicated and non-intuitive. Add a
subcommand, 'git sparse-checkout disable', to perform those
steps for the user.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
and places them in the sparse-checkout file. Then, it updates the
working directory to match those patterns. For a large list of
patterns, the command-line call can get very cumbersome.
Add a '--stdin' option to instead read patterns over standard in.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
as arguments and writes them to the sparse-checkout file. Then, it
updates the working directory using 'git read-tree -mu HEAD'.
The 'set' subcommand will replace the entire contents of the
sparse-checkout file. The write_patterns_and_update() method is
extracted from cmd_sparse_checkout() to make it easier to implement
'add' and/or 'remove' subcommands in the future.
If the core.sparseCheckout config setting is disabled, then enable
the config setting in the worktree config. If we set the config
this way and the sparse-checkout fails, then re-disable the config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When someone wants to clone a large repository, but plans to work
using a sparse-checkout file, they either need to do a full
checkout first and then reduce the patterns they included, or
clone with --no-checkout, set up their patterns, and then run
a checkout manually. This requires knowing a lot about the repo
shape and how sparse-checkout works.
Add a new '--sparse' option to 'git clone' that initializes the
sparse-checkout file to include the following patterns:
/*
!/*/
These patterns include every file in the root directory, but
no directories. This allows a repo to include files like a
README or a bootstrapping script to grow enlistments from that
point.
During the 'git sparse-checkout init' call, we must first look
to see if HEAD is valid, since 'git clone' does not have a valid
HEAD at the point where it initializes the sparse-checkout. The
following checkout within the clone command will create the HEAD
ref and update the working directory correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getting started with a sparse-checkout file can be daunting. Help
users start their sparse enlistment using 'git sparse-checkout init'.
This will set 'core.sparseCheckout=true' in their config, write
an initial set of patterns to the sparse-checkout file, and update
their working directory.
Make sure to use the `extensions.worktreeConfig` setting and write
the sparse checkout config to the worktree-specific config file.
This avoids confusing interactions with other worktrees.
The use of running another process for 'git read-tree' is sub-
optimal. This will be removed in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since format-patch accepts `--[no-]notes`, one would expect the
range-diff generated to also respect the setting. Unfortunately, the
range-diff we currently generate only uses the default option (which
always outputs default notes, even when notes are not being used
elsewhere).
Pass the notes configuration to range-diff so that it can honor it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit being range-diff'd has a note attached to it, the note
will be compared as well. However, if a user has multiple notes refs or
if they want to suppress notes from being printed, there is currently no
way to do this.
Pass through `--[no-]notes[=<ref>]` to the `git log` call so that this
option is customizable.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--interactive/--patch`, even when <file> is not `stdin`. Such use
case it not really expected. Also, it would require changes to
`interactive_add()`.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected. Also, it is harder to support in `git commit`, so
I decided to make it incompatible in all places.
2) It is not allowed to pass pathspec in both args and file.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` shows an example of good writing, follow it.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git unpack-objects' shows a progress line only counting the number of
unpacked objects, so if some of the received objects are unusually
large, then that progress might appear to be frozen while processing
such a larger object. I just stared at a seemingly stuck progress
line for over half a minute, while 'git fetch' was busy receiving a
pack with only a couple of objects (i.e. fewer than
'fetch.unpackLimit'), with one of them being over 80MB.
Display throughput in 'git unpack-objects' progress line, so we show
that something is going on even when receiving and processing a large
object.
Counting the consumed bytes is far away from the place that
counts objects and displays progress, and to pass around the 'struct
progress' instance we would have to modify the signature of five
functions and 14 of their callsites: this is just too much churn, so
let's rather make it file-scope static.
'git index-pack', i.e. the non-unpacking cousin of 'git
unpack-objects' already includes throughput in its progress line, and
it uses a file-scope static 'struct progress' instance as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since it was introduced in 7cceca5ccc (Add 'git rev-parse
--show-toplevel' option., 2010-01-12), the --show-toplevel option has
treated a missing working tree as a quiet success: it neither prints a
toplevel path, but nor does it report any kind of error.
While a caller could distinguish this case by looking for an empty
response, the behavior is rather confusing. We're better off complaining
that there is no working tree, as other internal commands would do in
similar cases (e.g., "git status" or any builtin with NEED_WORK_TREE set
would just die()). So let's do the same here.
While we're at it, let's clarify the documentation and add some tests,
both for the new behavior and for the more mundane case (which was not
covered).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'do_apply_stash()' we refresh the index in the end. Since
34933d0eff ("stash: make sure to write refreshed cache", 2019-09-11),
we also write that refreshed index when --quiet is given to 'git stash
apply'.
However if '--index' is not given to 'git stash apply', we also
discard the index in the else clause just before. We need to do so
because we use an external 'git update-index --add --stdin', which
leads to an out of date in-core index.
Later we call 'refresh_and_write_cache', which now leads to writing
the discarded index, which means we essentially write an empty index
file. This is obviously not correct, or the behaviour the user
wanted. We should not modify the users index without being asked to
do so.
Make sure to re-read the index after discarding the current in-core
index, to avoid dealing with outdated information. Instead we could
also drop the 'discard_cache()' + 'read_cache()', however that would
make it easy to fall into the same trap as 34933d0eff did, so it's
better to avoid that.
We can also drop the 'refresh_and_write_cache' completely in the quiet
case. Previously in legacy stash we relied on 'git status' to refresh
the index after calling 'git read-tree' when '--index' was passed to
'git apply'. However the 'reset_tree()' call that replaced 'git
read-tree' always passes options that are equivalent to '-m', making
the refresh of the index unnecessary.
Reported-by: Grzegorz Rajchman <rayman17@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6462d5eb9a ("fetch: remove fetch_if_missing=0", 2019-11-08)
strove to remove the need for fetch_if_missing=0 from the fetching
mechanism, so it is plausible to attempt removing fetch_if_missing=0
from clone as well. But doing so reveals a bug - when the server does
not send an object directly pointed to by a ref, this should be an
error, not a trigger for a lazy fetch. (This case in the fetching
mechanism was covered by a test using "git clone", not "git fetch",
which is why the aforementioned commit didn't uncover the bug.)
The bug can be fixed by suppressing lazy-fetching during the
connectivity check. Fix this bug, and remove fetch_if_missing from
clone.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --quiet to git-bundle verify as proposed on the mailing list [1].
Reference: https://www.mail-archive.com/git@vger.kernel.org/msg182844.html <robbat2-20190806T191156-796782357Z@orbis-terrarum.net>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the progress output options from pack-objects in git-bundle's
create subcommand. Most notably, this provides --quiet as requested on
the git mailing list per [1]
Reference: https://www.mail-archive.com/git@vger.kernel.org/msg182844.html <robbat2-20190806T191156-796782357Z@orbis-terrarum.net>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible for any of the git-bundle subcommands to include
options:
- before the sub-command
- after the sub-command, before the bundle filename
There is an immediate gain in support for help with all of the
sub-commands, where 'git bundle list-heads -h' previously returned an
error.
Downside here is an increase in code duplication that cannot be
trivially avoided short of shared global static options.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
The code to generate multi-pack index learned to show (or not to
show) progress indicators.
* wb/midx-progress:
multi-pack-index: add [--[no-]progress] option.
midx: honor the MIDX_PROGRESS flag in midx_repack
midx: honor the MIDX_PROGRESS flag in verify_midx_file
midx: add progress to expire_midx_packs
midx: add progress to write_midx_file
midx: add MIDX_PROGRESS flag
"git rebase --preserve-merges" has been marked as deprecated; this
release stops advertising it in the "git rebase -h" output.
* js/rebase-deprecate-preserve-merges:
rebase: hide --preserve-merges option
Move the definition of a set of bitmask constants from 0ctal
literal to (1U<<count) notation.
* hv/bitshift-constants-in-blame:
builtin/blame.c: constants into bit shift format
"git notes copy $original" ought to copy the notes attached to the
original object to HEAD, but a mistaken tightening to command line
parameter validation made earlier disabled that feature by mistake.
* dd/notes-copy-default-dst-to-head:
notes: fix minimum number of parameters to "copy" subcommand
t3301: test diagnose messages for too few/many paramters
"rebase -i" ceased to run post-commit hook by mistake in an earlier
update, which has been corrected.
* pw/post-commit-from-sequencer:
sequencer: run post-commit hook
move run_commit_hook() to libgit and use it there
sequencer.h fix placement of #endif
t3404: remove uneeded calls to set_fake_editor
t3404: set $EDITOR in subshell
t3404: remove unnecessary subshell
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
Debugging support for lazy cloning has been a bit improved.
* jt/fetch-pack-record-refs-in-the-dot-promisor:
fetch-pack: write fetched refs to .promisor
In fetch_pack() (and all functions it calls), pass
OBJECT_INFO_SKIP_FETCH_OBJECT whenever we query an object that could be
a tree or blob that we do not want to be lazy-fetched even if it is
absent. Thus, the only lazy-fetches occurring for trees and blobs are
when resolving deltas.
Thus, we can remove fetch_if_missing=0 from builtin/fetch.c. Remove
this, and also add a test ensuring that such objects are not
lazy-fetched. (We might be able to remove fetch_if_missing=0 from other
places too, but I have limited myself to builtin/fetch.c in this commit
because I have not written tests for the other commands yet.)
Note that commits and tags may still be lazy-fetched. I limited myself
to objects that could be trees or blobs here because Git does not
support creating such commit- and tag-excluding clones yet, and even if
such a clone were manually created, Git does not have good support for
fetching a single commit (when fetching a commit, it and all its
ancestors would be sent).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When both `fetch.jobs` and `fetch.writeCommitGraph` is set, we currently
try to write the commit graph in each of the concurrent fetch jobs,
which frequently leads to error messages like this one:
fatal: Unable to create '.../.git/objects/info/commit-graphs/commit-graph-chain.lock': File exists.
Let's avoid this by holding off from writing the commit graph until all
fetch jobs are done.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option overrides the config setting `fetch.writeCommitGraph`, if
both are set.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit introduced --ignore-date flag to interactive
rebase, but the name is actually very vague in context of rebase -i
since there are two dates we can work with. Add an alias to convey
the precise purpose.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase am already has this flag to "lie" about the author date
by changing it to the committer (current) date. Let's add the same
for interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase am already has this flag to "lie" about the committer date
by changing it to the author date. Let's add the same for
interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two backends available for rebasing, viz, the am and the
interactive. Naturally, there shall be some features that are
implemented in one but not in the other. One such flag is
--ignore-whitespace which indicates merge mechanism to treat lines
with only whitespace changes as unchanged. Wire the interactive
rebase to also understand the --ignore-whitespace flag by
translating it to -Xignore-space-change.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `git stash` while changes were staged for files that are
marked with the `skip-worktree` bit (e.g. files that are excluded in a
sparse checkout), the files are recorded as _deleted_ instead.
The reason is that `git stash` tries to construct the tree reflecting
the worktree essentially by copying the index to a temporary one and
then updating the files from the worktree. Crucially, it calls `git
diff-index` to update also those files that are in the HEAD but have
been unstaged in the index.
However, when the temporary index is updated via `git update-index --add
--remove`, skip-worktree entries mark the files as deleted by mistake.
Let's use the newly-introduced `--ignore-skip-worktree-entries` option
of `git update-index` to prevent exactly this from happening.
Note that the regression test case deliberately avoids replicating the
scenario described above and instead tries to recreate just the symptom.
Reported by Dan Thompson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df1 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"worktree add" internally calls "reset --hard", but if
submodule.recurse is set, reset tries to recurse into
initialized submodules, which makes start_command try to
cd into non-existing submodule paths and die.
Fix that by making sure that the call to reset in "worktree add"
does not recurse.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The indent heuristic is our default diff heuristic since 33de716387
(diff: enable indent heuristic by default, 2017-05-08), but the usage
string of 'git blame' still mentions it as "experimental heuristic".
We could simply update the short help associated with the option, but
according to the comment above the option's declaration it was "only
included here to get included in the "-h" output". That made sense
while the feature was still experimental and we wanted to give it more
exposure, but nowadays it's unnecessary.
So let's rather remove the '--indent-heuristic' option from 'git
blame's usage string. Note that 'git blame' will still accept this
option, as it is parsed in parse_revision_opt().
Astute readers may notice that this patch removes a comment mentioning
"the following two options", but it only removes one option. The
reason is that the comment is outdated: that other options was
'--compaction-heuristic', and it has already been removed in
3cde4e02ee (diff: retire "compaction" heuristics, 2016-12-23), but
that commit forgot to update this comment.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/clone.c has a static function dir_exists() that
checks if a given path exists on the filesystem. It returns
true (and it is correct for it to return true) when the
given path exists as a non-directory (e.g. a regular file).
This is confusing. What the caller wants to check, and what
this function wants to return, is if the path exists, so
rename it to path_exists().
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
