The old version fixes a maximum length on the buffer, which could be a problem
if one is not certain of the length of get_object_directory().
Using strbuf can avoid the protential bug.
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sun He <sunheehnus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'pack_tmp_name' is the subject of the utime() check, so report it in the
warning, not the uninitialized 'tmpname'
Signed-off-by: Sun He <sunheehnus@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
Code clean-up.
* dk/blame-janitorial:
builtin/blame.c::find_copy_in_blob: no need to scan for region end
blame.c: prepare_lines should not call xrealloc for every line
builtin/blame.c::prepare_lines: fix allocation size of sb->lineno
builtin/blame.c: eliminate same_suspect()
builtin/blame.c: struct blame_entry does not need a prev link
Teach "--gpg-sign" option to many commands that create commits.
* bc/gpg-sign-everywhere:
pull: add the --gpg-sign option.
rebase: add the --gpg-sign option
rebase: parse options in stuck-long mode
rebase: don't try to match -M option
rebase: remove useless arguments check
am: add the --gpg-sign option
am: parse options in stuck-long mode
git-sh-setup.sh: add variable to use the stuck-long mode
cherry-pick, revert: add the --gpg-sign option
Shrink lifetime of variables by moving their definitions to an
inner scope where appropriate.
* ep/varscope:
builtin/gc.c: reduce scope of variables
builtin/fetch.c: reduce scope of variable
builtin/commit.c: reduce scope of variables
builtin/clean.c: reduce scope of variable
builtin/blame.c: reduce scope of variables
builtin/apply.c: reduce scope of variables
bisect.c: reduce scope of variable
"git rev-parse --default" without the required option argument did
not diagnose it as an error.
* ds/rev-parse-required-args:
rev-parse: check i before using argv[i] against argc
Allow "git cmd path/", when the 'path' is where a submodule is
bound to the top-level working tree, to match 'path', despite the
extra and unnecessary trailing slash.
* nd/submodule-pathspec-ending-with-slash:
clean: use cache_name_is_other()
clean: replace match_pathspec() with dir_path_match()
pathspec: pass directory indicator to match_pathspec_item()
match_pathspec: match pathspec "foo/" against directory "foo"
dir.c: prepare match_pathspec_item for taking more flags
pathspec: rename match_pathspec_depth() to match_pathspec()
pathspec: convert some match_pathspec_depth() to dir_path_match()
pathspec: convert some match_pathspec_depth() to ce_path_match()
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
Introduce commit.gpgsign configuration variable to force every
commit to be GPG signed. The variable cannot be overriden from the
command line of some of the commands that create commits except for
"git commit" and "git commit-tree", but I am not convinced that it
is a good idea to sprinkle support for --no-gpg-sign everywhere,
which in turn means that this configuration variable may not be
such a good idea.
* nv/commit-gpgsign-config:
test the commit.gpgsign config option
commit-tree: add and document --no-gpg-sign
commit-tree: add the commit.gpgsign option to sign all commits
Document how to override commit.gpgsign configuration that is set to
true per "git commit" invocation (parse-options machinery lets us
say "--no-gpg-sign" to do so).
"git commit-tree" does not use parse-options, so manually add the
corresponding option for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you want to GPG sign all your commits, you have to add the -S option
all the time. The commit.gpgsign config option allows to sign all
commits automatically.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_clean() has the exact same code of index_name_is_other(). Reduce
code duplication.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This instance was left out when many match_pathspec() call sites that
take input from dir_entry were converted to dir_path_match() because
it passed a path with the trailing slash stripped out to match_pathspec()
while the others did not. Stripping for all call sites back then would
be a regression because match_pathspec() did not know how to match
pathspec foo/ against _directory_ foo (the stripped version of path
"foo/").
match_pathspec() knows how to do it now. And dir_path_match() strips
the trailing slash also. Use the new function, because the stripping
code is removed in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which
makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce
the same output. Previously only the version without trailing slash
returns the difference (if any).
That's the effect of new ce_path_match(). dir_path_match() is not
executed by the new tests. And it should not introduce regressions.
Previously if path "dir/" is passed in with pathspec "dir/", they
obviously match. With new dir_path_match(), the path becomes
_directory_ "dir" vs pathspec "dir/", which is not executed by the old
code path in m_p_i(). The new code path is executed and produces the
same result.
The other case is pathspec "dir" and path "dir/" is now turned to
"dir" (with DO_MATCH_DIRECTORY). Still the same result before or after
the patch.
So why change? Because of the next patch about clean.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps reduce the number of match_pathspec_depth() call sites and
show how m_p_d() is used. And it usage is:
- match against an index entry (ce_path_match or match_pathspec_depth
in ls-files)
- match against a dir_entry from read_directory (dir_path_match and
match_pathspec_depth in clean.c, which will be converted later)
- resolve-undo (rerere.c and ls-files.c)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Making a single preparation run for counting the lines will avoid memory
fragmentation. Also, fix the allocated memory size which was wrong
when sizeof(int *) != sizeof(int), and would have been too small
for sizeof(int *) < sizeof(int), admittedly unlikely.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are calling xrealloc on every single line, the least we can do
is get the right allocation size.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the origin pointers are "interned" and reference-counted, comparing
the pointers rather than the content is enough. The only uninterned
origins are cached values kept in commit->util, but same_suspect is not
called on them.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --mixed is used, entries could be removed from index if the
target ref does not have them. When "reset" is used in preparation for
commit spliting (in a dirty worktree), it could be hard to track what
files to be added back. The new option --intent-to-add simplifies it
by marking all removed files intent-to-add.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
When a repo was fully repacked, and is repacked again, we may run
into the situation that "new" packfiles have the same name as
already existing ones (traditionally packfiles have been named after
the list of names of objects in them, so repacking all the objects
in a single pack would have produced a packfile with the same name).
The logic is to rename the existing ones into filename like
"old-XXX", create the new ones and then remove the "old-" ones.
When something went wrong in the middle, this sequence is rolled
back by renaming the "old-" files back.
The renaming into "old-" did not work as intended, because
file_exists() was done on "XXX", not "pack-XXX". Also when rolling
back the change, the code tried to rename "old-pack-XXX" but the
saved ones are named "old-XXX", so this couldn't have worked.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --prefix, --default, and --resolve-git-dir options to
git-rev-parse require an argument, but when given no argument,
the code uses the NULL read from argv[argc] without checking,
leading to a segfault.
Instead, check first and die() with an error message.
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git repack --max-pack-size=8g" stopped being parsed correctly when
the command was reimplemented in C.
* sb/repack-in-c:
repack: propagate pack-objects options as strings
repack: make parsed string options const-correct
repack: fix typo in max-pack-size option
Code clean-up and protection against concurrent write access to the
ref namespace.
* mh/safe-create-leading-directories:
rename_tmp_log(): on SCLD_VANISHED, retry
rename_tmp_log(): limit the number of remote_empty_directories() attempts
rename_tmp_log(): handle a possible mkdir/rmdir race
rename_ref(): extract function rename_tmp_log()
remove_dir_recurse(): handle disappearing files and directories
remove_dir_recurse(): tighten condition for removing unreadable dir
lock_ref_sha1_basic(): if locking fails with ENOENT, retry
lock_ref_sha1_basic(): on SCLD_VANISHED, retry
safe_create_leading_directories(): add new error value SCLD_VANISHED
cmd_init_db(): when creating directories, handle errors conservatively
safe_create_leading_directories(): introduce enum for return values
safe_create_leading_directories(): always restore slash at end of loop
safe_create_leading_directories(): split on first of multiple slashes
safe_create_leading_directories(): rename local variable
safe_create_leading_directories(): add explicit "slash" pointer
safe_create_leading_directories(): reduce scope of local variable
safe_create_leading_directories(): fix format of "if" chaining
In the original shell version of git-repack, any options
destined for pack-objects were left as strings, and passed
as a whole. Since the C rewrite in commit a1bbc6c (repack:
rewrite the shell script in C, 2013-09-15), we now parse
these values to integers internally, then reformat the
integers when passing the option to pack-objects.
This has the advantage that we catch format errors earlier
(i.e., when repack is invoked, rather than when pack-objects
is invoked).
It has three disadvantages, though:
1. Our internal data types may not be the right size. In
the case of "--window-memory" and "--max-pack-size",
these are "unsigned long" in pack-objects, but we can
only represent a regular "int".
2. Our parsing routines might not be the same as those of
pack-objects. For the two options above, pack-objects
understands "100m" to mean "100 megabytes", but repack
does not.
3. We have to keep a sentinel value to know whether it is
worth passing the option along. In the case of
"--window-memory", we currently do not pass it if the
value is "0". But that is a meaningful value to
pack-objects, where it overrides any configured value.
We can fix all of these by simply passing the strings from
the user along to pack-objects verbatim. This does not
actually fix anything for "--depth" or "--window", but these
are converted, too, for consistency.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use OPT_STRING to parse an option, we get back a
pointer into the argv array, which should be "const char *".
The compiler doesn't notice because it gets passed through a
"void *" in the option struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see "--max-pack-size", we accidentally propagated
this to pack-objects as "--max_pack_size", which does not
work at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Our xwrite wrapper already deals with a few potential hazards, and
are as such more robust. Prefer it instead of write to get the
robustness benefits everywhere.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-and-improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "gc" process running as a different user should be able to stop a
new "gc" process from starting.
* km/gc-eperm:
gc: notice gc processes run by other users
"git mv A B/", when B does not exist as a directory, should error
out, but it didn't.
* mm/mv-file-to-no-such-dir-with-slash:
mv: let 'git mv file no-such-dir/' error out on Windows, too
mv: let 'git mv file no-such-dir/' error out
"git rev-parse <revs> -- <paths>" did not implement the usual
disambiguation rules the commands in the "git log" family used in
the same way.
* jk/rev-parse-double-dashes:
rev-parse: be more careful with munging arguments
rev-parse: correctly diagnose revision errors before "--"
"git cat-file --batch=", an admittedly useless command, did not
behave very well.
* jk/cat-file-regression-fix:
cat-file: handle --batch format with missing type/size
cat-file: pass expand_data to print_object_or_die
The previous commit c57f628 (mv: let 'git mv file no-such-dir/' error out)
relies on that rename("file", "no-such-dir/") fails if the directory does not
exist (note the trailing slash). This does not work as expected on Windows:
This rename() call does not fail, but renames "file" to "no-such-dir" (not to
"no-such-dir/file"). Insert an explicit check for this case to force an error.
This changes the error message from
$ git mv file no-such-dir/
fatal: renaming 'file' failed: Not a directory
to
$ git mv file no-such-dir/
fatal: destination directory does not exist, source=file, destination=no-such-dir/
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
