Modify the p4merge client command to pass a reference to an empty file
instead of the local file when no base revision available.
In the situation where a merge tries to add a file from one branch
into a branch that already contains that file (by name), p4merge
currently seems to have successfully automatically resolved the
'conflict' when it is opened (correctly if the files differed by
just whitespace for example) but leaves the save button disabled. This
means the user of the p4merge client cannot commit the resolved
changes back to disk and merely exits, leaving the original
(merge-conflicted) file intact on the disk.
Provide an empty base file to p4merge so that it leaves the save
button enabled. This will allow saving of the auto-resolution to
disk.
Signed-off-by: Ciaran Jessup <ciaranj@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In conn, if password is not passed on command line, look for a password
entry in both the CVS password file and the CVSNT password file. If only
one file is found and the requested repository is in that file, or if both
files are found but the requested repository is found in only one file, use
the password from the single file containing the repository entry. If both
files are found and the requested repository is found in both files, then
produce an error message.
The CVS password file separates tokens with a space character, while
the CVSNT password file separates tokens with an equal (=) character.
Add a sub find_password_entry that accepts the password file name
and a delimiter to eliminate code duplication.
Signed-off-by: Guy Rouillier <guyr@burntmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-one-file tool predates the invention of
GIT_WORK_TREE. By the time GIT_WORK_TREE was invented, most
people were using the merge-recursive strategy, which
handles resolving internally. Therefore these features have
had very little testing together.
For the most part, merge-one-file just works with
GIT_WORK_TREE; most of its heavy lifting is done by plumbing
commands which do respect GIT_WORK_TREE properly. The one
exception is a shell redirection which touches the worktree
directly, writing results to the wrong place in the presence
of a GIT_WORK_TREE variable.
This means that merges won't even fail; they will silently
produce incorrect results, throwing out the entire "theirs"
side of files which need content-level merging!
This patch makes merge-one-file chdir to the toplevel of the
working tree (and exit if we don't have one). This most
closely matches the assumption made by the original script
(before separate work trees were invented), and matches what
happens when the script is called as part of a merge
strategy.
While we're at it, we'll also error-check the call to cat.
Merging a file in a subdirectory could in fact fail, as the
redirection relies on the "checkout-index" call just prior
to create leading directories. But we never noticed, since
we ignored the error return from running cat.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were no tests for either, except a brief use in
t1200-tutorial.
These tools are not used much these days, as most people
use the merge-recursive strategy, which handles everything
internally. However, they are used by the "octopus" and
"resolve" strategies, as well as any custom strategies
or merge scripts people have built around them.
For example, together with read-tree, they are the simplest
way to do a basic content-level merge without checking out
the entire repository contents beforehand.
This script adds a basic test of the tools to perform one
content-level merge. It also shows a failure of the tools to
work properly in the face of GIT_WORK_TREE or core.worktree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0beee4c (git-add--interactive: remove hunk coalescing, 2008-07-02),
"git add--interactive" behaves lazily and passes overlapping hunks to the
underlying "git apply" without coalescing. This was partially corrected
by 7a26e65 (its partial revert, 2009-05-16), but overlapping hunks are
still passed when the patch is edited.
Teach "git apply" the --allow-overlap option that disables a safety
feature that avoids misapplication of patches by not applying patches
to overlapping hunks, and pass this option form "add -p" codepath.
Do not even advertise the option, as this is merely a workaround, and the
correct fix is to make "add -p" correctly coalesce adjacent patch hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the direction and the target of patch application, we would
need to pass --cached and --reverse to underlying "git apply". Also we
only pass --check when we are not applying but just checking.
But we always pass --recount since 8cbd431 (git-add--interactive: replace
hunk recounting with apply --recount, 2008-07-02). Instead of repeating
the same --recount over and over again, move it to a single place that
actually runs the command, namely, "run_git_apply" subroutine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Arnaud Lacombe reported that with the recent change to reject overlapping
hunks fed to "git apply", the edit mode of an "add -p" session that lazily
feeds overlapping hunks without coalescing adjacent ones claim that the
patch does not apply. Expose the problem to be fixed.
Cf. http://thread.gmane.org/gmane.comp.version-control.git/170685/focus=171000
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "quit" command was added in 9a7a1e0 (git add -p: new "quit" command at
the prompt, 2009-04-10) to allow the user to say that hunks other than
what have already been chosen are undesirable, and exit the interactive
loop immediately. It forgot that there may be an undecided hunk before
the current one. In such a case, the interactive loop still goes back to
the beginning.
Clear all the USE bit for undecided hunks and exit the loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the $projects_list_group_categories option which, if enabled,
will result in grouping projects by category on the project list page.
The category is specified for each project by the $GIT_DIR/category file
or the 'gitweb.category' variable in its configuration file. By default,
projects are put in the $project_list_default_category category.
Note:
- Categories are always sorted alphabetically, with projects in
each category sorted according to the globally selected $order.
- When displaying a subset of all the projects (page limiting), the
category headers are only displayed for projects present on the page.
The feature is inspired from Sham Chukoury's patch for the XMMS2
gitweb, but has been rewritten for the current gitweb code. The CSS
for categories is inspired from Gustavo Sverzut Barbieri's patch to
group projects by path.
Thanks to Florian Ragwitz for Perl tips.
[jn: Updated to post restructuring projects list generation, fixed bugs,
added very basic test in t9500 that there are no warnings from Perl.]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It might have been hard to discover that current view is limited to
projects with given content tag (ctag), as it was distinquished only
in gitweb URL. Mark matched contents tag in the tag cloud using
"match" class, for easier discovery.
This commit introduces a bit of further code duplication in
git_populate_project_tagcloud().
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a git_get_file_or_project_config utility function to
retrieve a repository variable either from a plain text file in the
$GIT_DIR or else from 'gitweb.$variable' in the repository config
(e.g. 'description').
This would be used in next commit to retrieve category for a project,
which is to be stored in the same way as project description.
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The major change is removing the ability to edit content tags (ctags)
in a web browser.
The interface was created by gitweb, while actual editing of tags was
to be done by external script; the API was not defined, and neither
was provided example implementation. Such split is also a bit fragile
- interface and implementation have to be kept in sync. Gitweb
provided only ability to add tags; you could not edit tags nor delete
them.
Format of ctags is now described in the comment above git_get_project_ctags
subroutine. Gitweb now is more robust with respect to original ctags
format; it also accepts two new formats: $GIT_DIR/ctags file, with one
content tag per line, and multi-value `gitweb.ctag' config variable.
Gathering all ctags of all project is now put in git_gather_all_ctags
subroutine, making git_project_list_body more clear.
git_populate_project_tagcloud subroutine now generates data used for
tag cloud, including generation of ctag link, also in the case
HTML::TagCloud module is unavailable. Links are now generated using
href() subroutine - this is more robust, as ctags might contain '?',
';' and '=' special characters that need to be escaped in query param.
Shown tags are HTML-escaped.
The generation of tag cloud in git_show_project_tagcloud in the case
when HTML::TagCloud is not available is now changed slightly.
The 'content tags' field on project summary page is made more in line
with other fields in "projects_list" table. Because one cannot now
add new tags from web interface, this field is no longer displayed
when there are no content tags for given project.
Ctags-issue-Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Ctags-issue-Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the printing of project rows (body/contents of projects list
table) on the 'project_list' page into a separate git_project_list_rows
function. This makes it easier to reuse the code to print different
subsets of the whole project list.
[jn: Updated to post restructuring projects list generation]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract filtering out forks (which is done if 'forks' feature is
enabled) into filter_forks_from_projects_list subroutine, and
searching projects (via projects search form, or via content tags)
into search_projects_list subroutine.
Both are now run _before_ displaying projects, and not while printing;
this allow to know upfront if there were any found projects. Gitweb
now can and do print 'No such projects found' if user searches for
phrase which does not correspond to any project (any repository).
This also would allow splitting projects list into pages, if we so
desire.
Filtering out forks and marking repository (project) as having forks
is now consolidated into one subroutine (special case of handling
forks in git_get_projects_list only for $projects_list being file is
now removed). Forks handling is also cleaned up and simplified.
$pr->{'forks'} now contains un-filled list of forks; we can now also
detect situation where the way for having forks is prepared, but there
are no forks yet.
Sorting projects got also refactored in a very straight way (just
moving code) into sort_projects_list subroutine.
The interaction between forks, content tags and searching is now made
more explicit: searching whether by tag, or via search form turns off
fork filtering (gitweb searches also forks, and will show all
results). If 'ctags' feature is disabled, then searching by tag is
too.
The t9500 test now includes some basic test for 'forks' and 'ctags'
features; the t9502 includes test checking if gitweb correctly filters
out forks.
Generating list of projects by scanning given directory is now also a
bit simplified wrt. handling filtering; it is byproduct of extracting
filtering forks to separate subroutine.
While at it we now detect that there are no projects and respond with
"404 No projects found" also for 'project_index' and 'opml' actions.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the command cannot make a connection to the SMTP server the error
message to diagnose the broken configuration is issued. However, when an
optional smtp-server-port is given and needs to be reported, the message
lacked a space between "hello=<smtp-domain>" and "port=<smtp-server-port>".
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When encountering errors or unknown tokens while parsing parameters to the
--dirstat option, it makes sense to die() with an error message informing
the user of which parameter did not make sense. However, when parsing the
diff.dirstat config variable, we cannot simply die(), but should instead
(after warning the user) ignore the erroneous or unrecognized parameter.
After all, future Git versions might add more dirstat parameters, and
using two different Git versions on the same repo should not cripple the
older Git version just because of a parameter that is only understood by
a more recent Git version.
This patch fixes the issue by refactoring the dirstat parameter parsing
so that parse_dirstat_params() keeps on parsing parameters, even if an
earlier parameter was not recognized. When parsing has finished, it returns
zero if all parameters were successfully parsed, and non-zero if one or
more parameters were not recognized (with appropriate error messages
appended to the 'errmsg' argument).
The parse_dirstat_params() callers then decide (based on the return value
from parse_dirstat_params()) whether to warn and ignore (in case of
diff.dirstat), or to warn and die (in case of --dirstat).
The patch also adds a couple of tests verifying the correct behavior of
--dirstat and diff.dirstat in the face of unknown (possibly future) dirstat
parameters.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.
The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).
For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.
In linux-2.6.git, running the three different --dirstat modes:
time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null
yields the following average runtimes on my machine:
- "changes" (default): ~6.0 s
- "lines": ~9.6 s
- "files": ~0.1 s
So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.
The patch also includes documentation and tests for the new dirstat mode.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first digit after the decimal point is kept, as the dirstat
calculations all happen in permille.
Selftests verifying floating-point percentage input has been added.
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new diff.dirstat config variable takes the same arguments as
'--dirstat=<args>', and specifies the default arguments for --dirstat.
The config is obviously overridden by --dirstat arguments passed on the
command line.
When not specified, the --dirstat defaults are 'changes,noncumulative,3'.
The patch also adds several tests verifying the interaction between the
diff.dirstat config variable, and the --dirstat command line option.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having multiple interconnected dirstat-related options, teach
the --dirstat option itself to accept all behavior modifiers as parameters.
- Preserve the current --dirstat=<limit> (where <limit> is an integer
specifying a cut-off percentage)
- Add --dirstat=cumulative, replacing --cumulative
- Add --dirstat=files, replacing --dirstat-by-file
- Also add --dirstat=changes and --dirstat=noncumulative for specifying the
current default behavior. These allow the user to reset other --dirstat
parameters (e.g. 'cumulative' and 'files') occuring earlier on the
command line.
The deprecated options (--cumulative and --dirstat-by-file) are still
functional, although they have been removed from the documentation.
Allow multiple parameters to be separated by commas, e.g.:
--dirstat=files,10,cumulative
Update the documentation accordingly, and add testcases verifying the
behavior of the new syntax.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected output from --dirstat=0, is to include any directory with
changes, even if those changes contribute a minuscule portion of the total
changes. However, currently, directories that contribute less than 0.1% are
not included, since their 'permille' value is 0, and there is an
'if (permille)' check in gather_dirstat() that causes them to be ignored.
This test is obviously intended to exclude directories that contribute no
changes whatsoever, but in this case, it hits too broadly. The correct
check is against 'this_dir' from which the permille is calculated. Only if
this value is 0 does the directory truly contribute no changes, and should
be skipped from the output.
This patches fixes this issue, and updates corresponding testcases to
expect the new behvaior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, t4013 is the only selftest that exercises the --dirstat machinery,
but it only does a superficial verification of --dirstat's output.
This patch adds a new selftest - t4047-diff-dirstat.sh - which prepares a
commit containing:
- unchanged files, changed files and files with rearranged lines
- copied files, moved files, and unmoved files
It then verifies the correct dirstat output for that commit in the following
dirstat modes:
- --dirstat
- -X
- --dirstat=0
- -X0
- --cumulative
- --dirstat-by-file
- (plus combinations of the above)
Each of the above tests are also run with:
- no rename detection
- rename detection (-M)
- expensive copy detection (-C -C)
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply parameter expansion. Also use here document to save
test results instead of appending each line with ">>".
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9d8a5a5 (diffcore-rename: refactor "too many candidates" logic,
2011-01-06), diffcore_rename() initializes num_src but does not use it
anymore. "-Wunused-but-set-variable" in gcc-4.6 complains about this.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
* en/merge-recursive:
merge-recursive: tweak magic band-aid
merge-recursive: When we detect we can skip an update, actually skip it
t6022: New test checking for unnecessary updates of files in D/F conflicts
t6022: New test checking for unnecessary updates of renamed+modified files
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
Definitions of ETC_GITCONFIG, ETC_GITATTRIBUTES and sysconfdir depend on
value of prefix. As prefix can be changed in config.mak.autogen, all if
blocks with conditions based on prefix should be placed after the file
is included in Makefile.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' uses 'git merge' to preserve merges (-p). This preserves
the original merge commit correctly, except when the original merge
commit was created by 'git merge --no-ff'. In this case, 'git rebase'
will fail to preserve the merge, because during 'git rebase', 'git
merge' will simply fast-forward and skip the commit. For example:
B
/ \
A---M
/
---o---O---P---Q
If we try to rebase M onto P, we lose the merge commit and this happens:
A---B
/
---o---O---P---Q
To correct this, we simply do a "no fast-forward" on all merge commits
when rebasing. Since by the time we decided to do a 'git merge' inside
'git rebase', it means there was a merge originally, so 'git merge'
should always create a merge commit regardless of what the merge
branches look like. This way, when rebase M onto P from the above
example, we get:
B
/ \
A---M
/
---o---O---P---Q
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "_get_comp_words_by_ref -n := words" command from the
bash_completion library reassembles a modified version of COMP_WORDS
with ':' and '=' no longer treated as word separators and stores it in
the ${words[@]} array. Git's programmable tab completion script uses
this to abstract away the difference between bash v3's and bash v4's
definitions of COMP_WORDS (bash v3 used shell words, while bash v4
breaks at separator characters); see v1.7.4-rc0~11^2~2 (bash: get
--pretty=m<tab> completion to work with bash v4, 2010-12-02).
zsh has (or rather its completion functions have) another idea about
what ${words[@]} should contain: the array is prepopulated with the
words from the command it is completing. For reasons that are not
well understood, when git-completion.bash reserves its own "words"
variable with "local words", the variable becomes empty and cannot be
changed from then on. So the completion script neglects the arguments
it has seen, and words complete like git subcommand names. For
example, typing "git log origi<TAB>" gives no completions because
there are no "git origi..." commands.
However, when this words variable is not declared as local but is just
populated by _get_comp_words_by_ref() and then read in various
completion functions, then zsh seems to be happy about it and our
completion script works as expected.
So, to get our completion script working again under zsh and to
prevent the words variable from leaking into the shell environment
under bash, we will only declare words as local when using bash.
Reported-by: Stefan Haller <lists@haller-berlin.de>
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Explained-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we started to use _get_comp_words_by_ref()
to access completion-related variables. That was large change, and to
make it easily reviewable, we invoked _get_comp_words_by_ref() in each
completion function and systematically replaced every occurance of
bash's completion-related variables ($COMP_WORDS and $COMP_CWORD) with
variables set by _get_comp_words_by_ref().
This has the downside that _get_comp_words_by_ref() is invoked several
times during a single completion. The worst offender is perhaps 'git
log mas<TAB>': during the completion of 'master'
_get_comp_words_by_ref() is invoked no less than six times.
However, the variables $prev, $cword, and $words provided by
_get_comp_words_by_ref() are not modified in any of the completion
functions, and the previous commit ensures that the $cur variable is
not modified as well. This makes it possible to invoke
_get_comp_words_by_ref() to get those variables only once in our
toplevel completion functions _git() and _gitk(), and all other
completion functions will inherit them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we use _get_comp_words_by_ref() to access
completion-related variables, and the $cur variable holds the word
containing the current cursor position in all completion functions.
This $cur variable is left unchanged in most completion functions;
there are only four functions modifying its value, namely __gitcomp(),
__git_complete_revlist_file(), __git_complete_remote_or_refspec(), and
_git_config().
If this variable were never modified, then it would allow us a nice
optimisation and cleanup. Therefore, this patch assigns $cur to an
other local variable and uses that for later modifications in those
four functions.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rr/doc-content-type:
Documentation: Allow custom diff tools to be specified in 'diff.tool'
Documentation: Add diff.<driver>.* to config
Documentation: Move diff.<driver>.* from config.txt to diff-config.txt
Documentation: Add filter.<driver>.* to config
