This is the slop value used by name-rev, so presumably is a
reasonable default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for commits that contain other commits (e.g.,
via "git tag --contains"), we can end up traversing useless
portions of the graph. For example, if I am looking for a
tag that contains a commit made last week, there is not much
point in traversing portions of the history graph made five
years ago.
This optimization can provide massive speedups. For example,
doing "git tag --contains HEAD~200" in the linux-2.6
repository goes from:
real 0m5.302s
user 0m5.116s
sys 0m0.184s
to:
real 0m0.030s
user 0m0.020s
sys 0m0.008s
The downside is that we will no longer find some answers in
the face of extreme clock skew, as we will stop the
traversal early when seeing commits skewed too far into the
past.
Name-rev already implements a similar optimization, using a
"slop" of one day to allow for a certain amount of clock
skew in commit timestamps. This patch introduces a
"core.clockskew" variable, which allows specifying the
allowable amount of clock skew in seconds. For safety, it
defaults to "none", causing a full traversal (i.e., no
change in behavior from previous versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to know if commit A contains commit B (or any
one of a set of commits, B through Z), we generally
calculate the merge bases and see if B is a merge base of A
(or for a set, if any of the commits B through Z have that
property).
When we are going to check a series of commits A1 through An
to see whether each contains B (e.g., because we are
deciding which tags to show with "git tag --contains"), we
do a series of merge base calculations. This can be very
expensive, as we repeat a lot of traversal work.
Instead, let's leverage the fact that we are going to use
the same --contains list for each tag, and mark areas of the
commit graph is definitely containing those commits, or
definitely not containing those commits. Later tags can then
stop traversing as soon as they see a previously calculated
answer.
This sped up "git tag --contains HEAD~200" in the linux-2.6
repository from:
real 0m15.417s
user 0m15.197s
sys 0m0.220s
to:
real 0m5.329s
user 0m5.144s
sys 0m0.184s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases, fetching the remote HEAD explicitly is
unnecessary. It's just a symref pointing to a branch which
we are already fetching, so we will already ask for its sha1.
However, if the remote has a detached HEAD, things are less
certain. We do not ask for HEAD's sha1, but we do try to
write it into a local detached HEAD. In most cases this is
fine, as the remote HEAD is pointing to some part of the
history graph that we will fetch via the refs.
But if the remote HEAD points to an "orphan" commit (one
which was is not an ancestor of any refs), then we will not
have the object, and update_ref will complain when we try to
write the detached HEAD, aborting the whole clone.
This patch makes clone always explicitly ask the remote for
the sha1 of its HEAD commit. In the non-detached case, this
is a no-op, as we were going to ask for that sha1 anyway. In
the regular detached case, this will add an extra "want" to
the protocol negotiation, but will not change the history
that gets sent. And in the detached orphan case, we will
fetch the orphaned history so that we can write it into our
local detached HEAD.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
This finally gets rid of the inefficient verify-pack implementation that
walks objects in the packfile in their object name order and replaces it
with a call to index-pack --verify. As a side effect, it also removes
packed_object_info_detail() API which is rather expensive.
As this changes the way errors are reported (verify-pack used to rely on
the usual runtime error detection routine unpack_entry() to diagnose the
CRC errors in an entry in the *.idx file; index-pack --verify checks the
whole *.idx file in one go), update a test that expected the string "CRC"
to appear in the error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The histogram produced by "verify-pack -v" always had an artificial
limit of 50, but index-pack knows what the maximum delta depth is, so
we do not have to limit it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "index-pack" machinery already has almost enough knowledge to produce
the same output as "verify-pack -v". Fill small gaps in its bookkeeping,
and teach it to show what it knows.
Add a few more command line options that do not have to be advertised to
the end users. They will be used internally when verify-pack calls this.
The eventual goal is to remove verify-pack implementation and redo it as a
thin wrapper around the index-pack, so that we can remove the rather
expensive packed_object_info_detail() API.
This still does not do the delta-chain-depth histogram yet but that part
is easy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper function that takes the type of an object and
tell if it is a delta, as we seem to use this check in many places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When create a new branch, we fed "refs/heads/<proposed name>" as a string
to get_sha1() and expected it to fail when a branch already exists.
The right way to check if a ref exists is to check with resolve_ref().
A naïve solution that might appear attractive but does not work is to
forbid slashes in get_describe_name() but that will not work. A describe
name is is in the form of "ANYTHING-g<short sha1>", and that ANYTHING part
comes from a original tag name used in the repository the user ran the
describe command. A sick user could have a confusing hierarchical tag
whose name is "refs/heads/foobar" (stored as refs/tags/refs/heads/foobar")
to generate a describe name "refs/heads/foobar-6-g02ac983", and we should
be able to use that name to refer to the object whose name is 02ac983.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --heading, the filename is printed once before matches from that
file instead of at the start of each line, giving more screen space to
the actual search results.
This option is taken from ack (http://betterthangrep.com/). And now
git grep can dress up like it:
$ git config alias.ack "grep --break --heading --line-number"
$ git ack -e --heading
Documentation/git-grep.txt
154:--heading::
t/t7810-grep.sh
785:test_expect_success 'grep --heading' '
786: git grep --heading -e char -e lo_w hello.c hello_world >actual &&
808: git grep --break --heading -n --color \
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --break, an empty line is printed between matches from different
files, increasing readability. This option is taken from ack
(http://betterthangrep.com/).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 431d6e7b (grep: enable threading for context line printing)
split the printing of the "--\n" mark between results from different
files out into two places: show_line() in grep.c for the non-threaded
case and work_done() in builtin/grep.c for the threaded case. Commit
55f638bd (grep: Colorize filename, line number, and separator) updated
the former, but not the latter, so the separators between files are
not colored if threads are used.
This patch merges the two. In the threaded case, hunk marks are now
printed by show_line() for every file, including the first one, and the
very first mark is simply skipped in work_done(). This ensures that the
output is properly colored and works just as well.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* jc/notes-batch-removal:
show: --ignore-missing
notes remove: --stdin reads from the standard input
notes remove: --ignore-missing
notes remove: allow removing more than one
* jk/haves-from-alternate-odb:
receive-pack: eliminate duplicate .have refs
bisect: refactor sha1_array into a generic sha1 list
refactor refs_from_alternate_cb to allow passing extra data
The previous commit simply hijacked --quiet and essentially made it into a
no-op. Instead, take it as a cue that the end user wants to omit the patch
output from commands that default to show patches, e.g. "show".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a pretty_print_context representing the parameters
for a pretty-print session, but we did not use it uniformly.
As a result, functions kept growing more and more arguments.
Let's clean this up in a few ways:
1. All pretty-print pp_* functions now take a context.
This lets us reduce the number of arguments to these
functions, since we were just passing around the
context values separately.
2. The context argument now has a cmit_fmt field, which
was passed around separately. That's one less argument
per function.
3. The context argument always comes first, which makes
calling a little more uniform.
This drops lines from some callers, and adds lines in a few
places (because we need an extra line to set the context's
fmt field). Overall, we don't save many lines, but the lines
that are there are a lot simpler and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers don't actually care about the pretty print
context at all; let's just give them a simple way of
pretty-printing a commit without having to create a context
struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the "-k" option, mailinfo will convert a folded
subject header like:
Subject: this is a
subject that doesn't
fit on one line
into a single line. With "-k", however, we assumed that
these newlines were significant and represented something
that the sending side would want us to preserve.
For messages created by format-patch, this assumption was
broken by a1f6baa (format-patch: wrap long header lines,
2011-02-23). For messages sent by arbitrary MUAs, this was
probably never a good assumption to make, as they may have
been folding subjects in accordance with rfc822's line
length recommendations all along.
This patch now joins folded lines with a single whitespace
character. This treats header folding purely as a syntactic
feature of the transport mechanism, not as something that
format-patch is trying to tell us about the original
subject.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 13fc2c1 (remote: disallow some nonsensical option
combinations, 2011-03-30) made it impossible to use "remote
add -t foo --mirror". The argument was that specifying
specific branches is useless because:
1. Push mirrors do not want a refspec at all.
2. The point of fetch mirroring is to use a broad refspec
like "refs/*", but using "-t" overrides that.
Point (1) is valid; "-t" with push mirrors is useless. But
point (2) ignored another side effect of using --mirror: it
fetches the refs directly into the refs/ namespace as they
are found upstream, instead of placing them in a
separate-remote layout.
So 13fc2c1 was overly constrictive, and disallowed
reasonable specific-branch mirroring, like:
git remote add -t heads/foo -t heads/bar --mirror=fetch
which makes the local "foo" and "bar" branches direct
mirrors of the remote, but does not fetch anything else.
This patch restores the original behavior, but only for
fetch mirrors.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c
* js/maint-send-pack-stateless-rpc-deadlock-fix:
sideband_demux(): fix decl-after-stmt
send-pack: unbreak push over stateless rpc
send-pack: avoid deadlock when pack-object dies early
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c
* js/maint-send-pack-stateless-rpc-deadlock-fix:
sideband_demux(): fix decl-after-stmt
send-pack: unbreak push over stateless rpc
send-pack: avoid deadlock when pack-object dies early
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
The option can be used to check if read-tree with the same set of other
options like "-m" and "-u" would succeed without actually changing either
the index or the working tree.
The relevant tests in the t10?? range were extended to do a read-tree -n
before the real read-tree to make sure neither the index nor any local
files were changed with -n and the same exit code as without -n is
returned. The helper functions added for that purpose reside in the new
t/lib-read-tree.sh file.
The only exception is #13 in t1004 ("unlinking an un-unlink-able
symlink"). As this is an issue of wrong directory permissions it is not
detected with -n.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the merge command was made multi-strategy aware, we said
Merge made by octopus.
at the end of a session. Reword it to
Merge made by the 'octopus' strategy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching away from a detached HEAD with "git checkout", we give a
listing of the commits about to be lost, and then tell how to resurrect
them since 8e2dc6a (commit: give final warning when reattaching HEAD to
leave commits behind, 2011-02-18).
This is a good safety measure for people who are not comfortable with the
detached HEAD state, but the advice on how to keep the state you just left
was given even to those who set advice.detachedHead to false.
Keep the warning and informational commit listing, but honor the setting
of advice.detachedHead to squelch the advice.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/magic-pathspec:
setup.c: Fix some "symbol not declared" sparse warnings
t3703: Skip tests using directory name ":" on Windows
revision.c: leave a note for "a lone :" enhancement
t3703, t4208: add test cases for magic pathspec
rev/path disambiguation: further restrict "misspelled index entry" diag
fix overslow :/no-such-string-ever-existed diagnostics
fix overstrict :<path> diagnosis
grep: use get_pathspec() correctly
pathspec: drop "lone : means no pathspec" from get_pathspec()
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
magic pathspec: add ":(icase)path" to match case insensitively
magic pathspec: futureproof shorthand form
magic pathspec: add tentative ":/path/from/top/level" pathspec support
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
Conflicts:
environment.c
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c
When receiving a push, we advertise ref tips from any
alternate repositories, in case that helps the client send a
smaller pack. Since these refs don't actually exist in the
destination repository, we don't transmit the real ref
names, but instead use the pseudo-ref ".have".
If your alternate has a large number of duplicate refs (for
example, because it is aggregating objects from many related
repositories, some of which will have the same tags and
branch tips), then we will send each ".have $sha1" line
multiple times. This is a pointless waste of bandwidth, as
we are simply repeating the same fact to the client over and
over.
This patch eliminates duplicate .have refs early on. It does
so efficiently by sorting the complete list and skipping
duplicates. This has the side effect of re-ordering the
.have lines by ascending sha1; this isn't a problem, though,
as the original order was meaningless.
There is a similar .have system in fetch-pack, but it
does not suffer from the same problem. For each alternate
ref we consider in fetch-pack, we actually open the object
and mark it with the SEEN flag, so duplicates are
automatically culled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The foreach_alt_odb function triggers a callback for each
alternate object db we have, with room for a single void
pointer as data. Currently, we always call refs_from_alternate_cb
as the callback function, and then pass another callback (to
receive each ref individually) as the void pointer.
This has two problems:
1. C technically forbids stuffing a function pointer into
a "void *". In practice, this probably doesn't matter
on any architectures git runs on, but it never hurts to
follow the letter of the law.
2. There is no room for an extra data pointer. Indeed, the
alternate_ref_fn that refs_from_alternate_cb calls
takes a void* for data, but we always pass it NULL.
Instead, let's properly stuff our function pointer into a
data struct, which also leaves room for an extra
caller-supplied data pointer. And to keep things simple for
existing callers, let's make a for_each_alternate_ref
function that takes care of creating the extra struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We add every local ref to a list so that we can mark them
and all of their ancestors back to a certain cutoff point.
However, if some refs point to the same commit, we will end
up adding them to the list many times.
Furthermore, since commit_lists are stored as linked lists,
we must do an O(n) traversal of the list in order to find
the right place to insert each commit. This makes building
the list O(n^2) in the number of refs.
For normal repositories, this isn't a big deal. We have a
few hundreds refs at most, and most of them are unique. But
consider an "alternates" repo that serves as an object
database for many other similar repos. For reachability, it
needs to keep a copy of the refs in each child repo. This
means it may have a large number of refs, many of which
point to the same commits.
By noting commits we have already added to the list, we can
shrink the size of "n" in such a repo to the number of
unique commits, which is on the order of what a normal repo
would contain (it's actually more than a normal repo, since child repos
may have branches at different states, but in practice it tends
to be much smaller than the list with duplicates).
Here are the results on one particular giant repo
(containing objects for all Rails forks on GitHub):
$ git for-each-ref | wc -l
112514
[before]
$ git fetch --no-tags ../remote.git
63.52user 0.12system 1:03.68elapsed 99%CPU (0avgtext+0avgdata 137648maxresident)k
1856inputs+48outputs (11major+19603minor)pagefaults 0swaps
$ git fetch --no-tags ../remote.git
6.15user 0.08system 0:06.25elapsed 99%CPU (0avgtext+0avgdata 123856maxresident)k
0inputs+40outputs (0major+18872minor)pagefaults 0swaps
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of barfing, simply ignore bad object names seen in the
input. This is useful when reading from "git notes list" output
that may refer to objects that have already been garbage collected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the command to read object names to remove from the standard
input, in addition to the object names given from the command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the application, it is not necessarily an error for an object
to lack a note, especially if the only thing the caller wants to make sure
is that notes are cleared for an object. By passing this option from the
command line, the "git notes remove" command considers it a success if the
object did not have any note to begin with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While "xargs -n1 git notes rm" is certainly a possible way to remove notes
from many objects, this would create one notes "commit" per removal, which
is not quite suitable for seasonal housekeeping.
Allow taking more than one on the command line, and record their removal
as a single atomic event if everthing goes well.
Even though the old code insisted that "git notes rm" must be given only
one object (or zero, in which case it would default to HEAD), this
condition was not tested. Add tests to handle the new case where we feed
multiple objects, and also make sure if there is a bad input, no change
is recorded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git ls-remote" uses its exit status to indicate if it successfully
talked with the remote repository. A new option "--exit-code" makes the
command exit with status "2" when there is no refs to be listed, even when
the command successfully talked with the remote repository.
This way, the caller can tell if we failed to contact the remote, or the
remote did not have what we wanted to see. Of course, you can inspect the
output from the command, which has been and will continue to be a valid
way to check the same thing.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to set a multivar with "git config var value", "git config"
issues
warning: remote.repoor.push has multiple values
leaving the user under the impression that the operation succeeded,
unless one checks the return value.
Instead, make it
warning: remote.repoor.push has multiple values
error: cannot overwrite multiple values with a single value
Use a regexp, --add or --set-all to change remote.repoor.push.
to be clear and helpful.
Note: The "warning" is raised through other code paths also so that it
needs to remain a warning for these (which do not raise the error). Only
the caller can determine how to go on from that.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead return an integer that can be given to typename() if
the caller wants a string, just like everybody else does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
* mg/merge-ff-config:
tests: check git does not barf on merge.ff values for future versions of git
merge: introduce merge.ff configuration variable
Conflicts:
t/t7600-merge.sh
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
Although it is probably an uncommon operation, there is no
reason to disallow it, as it works just fine. It is the
reverse of a cherry-pick of a root commit, which is already
allowed.
We do have to tweak one check on whether we have a merge
commit, which assumed we had at least one parent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive strategy already handles root commits;
it cherry-picks the difference between the empty tree and
the root commit's tree.
However, for external strategies, we dereference NULL and
segfault while building the argument list. Instead, let's
handle this by passing the empty tree sha1 to the merge
script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/convert:
convert: make it harder to screw up adding a conversion attribute
convert: make it safer to add conversion attributes
convert: give saner names to crlf/eol variables, types and functions
convert: rename the "eol" global variable to "core_eol"
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
Most callers want to silently get a replacement object, and they do not
care what the real name of the replacement object is. Worse yet, no sane
interface to return the underlying object without replacement is provided.
Remove the function and make only the few callers that want the name of
the replacement object find it themselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config machinery already makes section and variable names
lowercase when parsing them, so using strcasecmp for comparison just
feels wasteful. No noticeable change intended.
Noticed-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
Templates should be just that: A form that the user fills out, and forms
have blanks. If people are attached to not having extra whitespace in the
editor, they can simply clean up their templates.
Added test with editor adding even more whitespace.
Signed-off-by: Boris Faure <billiob@gmail.com>
Based-on-patch-by:Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is no remaining string in argv, get_pathspec(prefix, argv)
will return a two-element array that has prefix as the first element,
so there is no need to re-roll that logic in the code that uses
get_pathspec().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disallow '-' as tag name, as well as tag names starting with '-', as it
would be cumbersome to "git checkout tags/-" because "git checkout -" is
to switch to the previous branch.
Add strbuf_check_tag_ref() as helper to check a refname for a tag.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one made "git grep -P" fail when grep.extendedRegexp is
enabled. That is a no-starter. The option on the command line should
just make the command ignore the configured default. The handling of "-F"
in the existing code has the same problem.
Instead of saying -G/-F/-E/-P incompatible with each other, just allow
the last one win. That way, you can have "[alias] gr = grep -P" and
use Pcre for everyday work e.g. "git gr ':i?foo'", and append -G to the
aliased command line to override it e.g. "git gr -G '[Ff][Oo][Oo]'".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --interactive flag is already shared by git add and git commit,
share the -p and --patch flags too.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git commit --interactive feel more like git add --interactive by
allowing the user to restrict the list of files they have to deal with.
A test in t7501 used to ensure that this is not allowed; no need for that
anymore.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes git-grep die() when -P is used on command line together
with -E/--extended-regexp or -F/--fixed-strings.
This also makes it bail out when grep.extendedRegexp is enabled.
But `git grep -G -P pattern` and `git grep -E -G -P pattern` still work
because -G and -E set opts.regflags during parse_options() and there is
no way to detect `-G` or `-E -G`.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just like --porcelain, except that we always output
the commit information for each line, not just the first
time it is referenced. This can make quick and dirty scripts
much easier to write; see the example added to the blame
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for adding more porcelain output
options. The three changes are:
1. emit_porcelain now receives the format option flags
2. emit_one_suspect_detail takes an optional "repeat"
parameter to suppress the "show only once" behavior
3. The code for emitting porcelain suspect is factored
into its own function for repeatability.
There should be no functional changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "format_check" parameter tucked after the existing parameters is too
ugly an afterthought to live in any reasonable API.
Combine it with the other boolean parameter "write_object" into a single
"flags" parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the two features from builtin/rerere.c to a more library-ish
portion of the codebase. No behaviour change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behaviour of git commit --interactive so that when you abort
the commit (by leaving the commit message empty) the index remains
unchanged.
Hitherto an aborted commit --interactive has added the selected hunks to
the index regardless of whether the commit succeeded or not.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable gives the default setting for --ff, --no-ff or --ff-only
options of "git merge" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/struct-pathspec:
pathspec: rename per-item field has_wildcard to use_wildcard
Improve tree_entry_interesting() handling code
Convert read_tree{,_recursive} to support struct pathspec
Reimplement read_tree_recursive() using tree_entry_interesting()
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Since 0beee4c (git-add--interactive: remove hunk coalescing, 2008-07-02),
"git add--interactive" behaves lazily and passes overlapping hunks to the
underlying "git apply" without coalescing. This was partially corrected
by 7a26e65 (its partial revert, 2009-05-16), but overlapping hunks are
still passed when the patch is edited.
Teach "git apply" the --allow-overlap option that disables a safety
feature that avoids misapplication of patches by not applying patches
to overlapping hunks, and pass this option form "add -p" codepath.
Do not even advertise the option, as this is merely a workaround, and the
correct fix is to make "add -p" correctly coalesce adjacent patch hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* rj/sparse:
sparse: Fix some "symbol not declared" warnings
sparse: Fix errors due to missing target-specific variables
sparse: Fix an "symbol 'merge_file' not decared" warning
sparse: Fix an "symbol 'format_subject' not declared" warning
sparse: Fix some "Using plain integer as NULL pointer" warnings
sparse: Fix an "symbol 'cmd_index_pack' not declared" warning
Makefile: Use cgcc rather than sparse in the check target
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
When --count is used with --cherry-mark, omit the patch equivalent
commits from the count for left and right commits and print the count of
equivalent commits separately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -u" updates the index with the updated contents from the working
tree by internally running "diff-files" to grab the set of paths that are
different from the index. Then it updates the index entries for the paths
that are modified in the working tree, and deletes the index entries for
the paths that are deleted in the working tree.
It ignored the output from the diff-files that indicated that a path is
unmerged. For these paths, it instead relied on the fact that an unmerged
path is followed by the result of comparison between stage #2 (ours) and
the working tree, and used that to update or delete such a path when it is
used to record the resolution of a conflict.
As the result, when a path did not have stage #2 (e.g. "we deleted while
the other side added"), these unmerged stages were left behind, instead of
recording what the user resolved in the working tree.
Since we recently fixed "diff-files" to indicate if the corresponding path
exists on the working tree for an unmerged path, we do not have to rely on
the comparison with stage #2 anymore. We can instead tell the diff-files
not to compare with higher stages, and use the unmerged output to update
the index to reflect the state of the working tree.
The changes to the test vector in t2200 illustrates the nature of the bug
and the fix. The test expected stage #1 and #3 entries be left behind,
but it was codifying the buggy behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike plain merge-base, merge-base --octopus only requires at least one
commit argument; update the synopsis to reflect that.
Add a sentence to the discussion that when --octopus is used, we do expect
'2' (the common ansestor across all) as the result.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use parse-options in cmd_log_init instead of manually iterating
through them. This makes the code a bit cleaner but more importantly
allows us to catch the "--quiet" option which causes some of the
log-related commands to misbehave as it would otherwise get passed on
to the diff.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '-r' command-line option is a no-op provided only for backward
compatiblity since abd6970 (cherry-pick: make -r the default, 2006-10-05),
and somehow ended up surviving across reimplementation in C at 9509af6
(Make git-revert & git-cherry-pick a builtin, 2007-03-01) and another
rewrite of the command line parser at f810379 (Make builtin-revert.c use
parse_options, 2007-10-07). We should have stopped advertising the option
long time ago.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --quiet flag is not meant to be passed on to the diff, as the user
always wants the patches to be produced so catch it and pass it to
reopen_stdout which decides whether to print the filename or not.
Noticed by Paul Gortmaker
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init,
clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc
Duy for translation.
This requires splitting up the tests that the patch added so that
certain parts of them can be skipped unless the C_LOCALE_OUTPUT
prerequisite is satisfied.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "Warning: you are leaving %d commit(s) behind" message added
in v1.7.5-rc0~74^2 (commit: give final warning when reattaching HEAD
to leave commits behind) by Junio C Hamano for translation.
This message requires the use of ngettext() features, and is the first
message to use the Q_() wrapper around ngettext().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages added in v1.7.5-rc0~117^2~2 (checkout: introduce
--detach synonym for "git checkout foo^{commit}") by Junio C Hamano
for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "repository '%s' does not exist" message added in
v1.7.4.2~21^2 (clone: die when trying to clone missing local path) by
Jeff King for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark CHERRY_PICK_HEAD related messages in builtin/merge.c that were
added in v1.7.5-rc0~88^2~2 (Introduce CHERRY_PICK_HEAD) by Jay Soffian
for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the merge messages that were added in v1.7.5-rc1~17^2 (merge:
merge with the default upstream branch without argument) by Junio C
Hamano for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "Could not read from '%s'" message that was added to
builtin/merge.c in v1.7.4.2~25^2 (merge: honor prepare-commit-msg
hook) by Jay Soffian for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add a new "merge-file.h" header
containing the extern declaration of the merge_file() function,
and include the header in the source files that require the
declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add an extern declaration for this
function to the "commit.h" header file, along with all other non-
static functions defined in pretty.c. Also, we remove the function
declaration from builtin/shortlog.c, since it is no longer needed.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like "git checkout -" is a short-hand for "git checkout @{-1}" to
conveniently switch back to the previous branch, "git merge -" is a
short-hand for "git merge @{-1}" to conveniently merge the previous branch.
It will allow me to say:
$ git checkout -b au/topic
$ git am -s ./+au-topic.mbox
$ git checkout pu
$ git merge -
which is an extremely typical and repetitive operation during my git day.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-remote-mirror-safer:
remote: deprecate --mirror
remote: separate the concept of push and fetch mirrors
remote: disallow some nonsensical option combinations
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user sets config.abbrev option, use it as if --abbrev was given. This
is the default value and user can override different abbrev length by
specifying the --abbrev=N command line option.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the point of the last change is to allow use of strings as
literals no matter what characters are in them, "has_wildcard"
does not match what we use this field for anymore.
It is used to decide if the wildcard matching should be used, so
rename it to match the usage better.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds the new colors to show-branch that were added a while
back for graph output.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/merge-sans-branch:
merge: merge with the default upstream branch without argument
merge: match the help text with the documentation
Conflicts:
builtin/merge.c
Currently, "git reflog" overrides some command line options such as
"--format".
Fix this by using the new 2-phase version of cmd_log_init().
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_log_init() sets up some default rev options and then calls
setup_revisions(), so that a caller cannot set up own defaults: Either
they get overriden by cmd_log_init() (if set before) or they override
the command line (if set after). We even complain about this in a
comment to cmd_log_reflog().
Therefore, separate the two steps so that one can still call
cmd_log_init() or, alternatively, cmd_log_init_defaults() followed by
cmd_log_init_finish() (and set defaults in between).
No functional change so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration created by plain --mirror is dangerous and
useless, and we now have --mirror=fetch and --mirror=push to
replace it. Let's warn the user.
One alternative to this is to try to guess which type the
user wants. In a non-bare repository, a fetch mirror doesn't
make much sense, since it would overwrite local commits. But
in a bare repository, you might use either type, or even
both (e.g., if you are acting as an intermediate drop-point
across two disconnected networks).
So rather than try for complex heuristics, let's keep it
simple. The user knows what they're trying to do, so let
them tell us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
[remote "mirror"]
url = wherever
fetch = +refs/*:refs/*
mirror = true
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It doesn't make sense to use "-m" on a mirror, since "-m"
sets up the HEAD symref in the remotes namespace, but with
mirror, we are by definition not using a remotes namespace.
Similarly, it does not make much sense to specify refspecs
with --mirror. For a mirror you plan to push to, those
refspecs will be ignored. For a mirror you are fetching
from, there is no point in mirroring, since the refspec
specifies everything you want to grab.
There is one case where "--mirror -t <X>" would be useful.
Because <X> is used as-is in the refspec, and because we
append it to to refs/, you could mirror a subset of the
hierarchy by doing:
git remote add --mirror -t 'tags/*'
But using anything besides a single branch as an argument to
"-t" is not documented and only happens to work, so closing
it off is not a serious regression.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "notes add" (without -f/--force) will abort when the given object
already has existing notes. This makes sense for the modes of "git notes add"
that would necessarily overwrite the old message (when using the -m/-F/-C/-c
options). However, when no options are given (meaning the notes are created
from scratch in the editor) it is not very user-friendly to abort on existing
notes, and forcing the user to run "git notes edit".
Instead, it is better to simply "redirect" to "git notes edit" automatically,
i.e. open the existing notes in the editor and let the user edit them.
This patch does just that.
This changes the behavior of "git notes add" without options when notes
already exist for the given object, but I doubt that many users really depend
on the previous failure from "git notes add" in this case.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is useful for other commands besides "git
notes" which want to let users refer to notes by their
shorthand name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fetch-pack-stop-early:
enable "no-done" extension only when fetching over smart-http
* sp/maint-upload-pack-stop-early:
enable "no-done" extension only when serving over smart-http
Last night I had to make these two emergency reverts, but now we have a
better understanding of which part of the topic was broken, let's get rid
of the revert to fix it correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch-pack/upload-pack protocol relies on the underlying transport
(local pipe or TCP socket) to have enough slack to allow one window worth
of data in flight without blocking the writer. Traditionally we always
relied on being able to have two windows of 32 "have"s in flight (roughly
3k bytes) to stream.
The recent "progressive-stride" change allows "fetch-pack" to send up to
1024 "have"s without reading any response from "upload-pack". The
outgoing pipe of "upload-pack" can be clogged with many ACK and NAK that
are unread, while "fetch-pack" is still stuffing its outgoing pipe with
more "have"s, leading to a deadlock.
Revert the change unless we are in stateless rpc (aka smart-http) mode, as
using a large window full of "have"s is still a good way to help reduce
the number of back-and-forth, and there is no buffering issue there (it is
strictly "ping-pong" without an overlap).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'no-done' protocol extension is used, the upload-pack (i.e. the
server side) process stops listening to the fetch-pack after issuing the
final NAK, and starts sending the generated pack data back, but there may
be more "have" send by the latter in flight that the fetch-pack is
expecting to be responded with ACK/NAK. This will typically result in a
deadlock (both will block on write that the other end never reads) or
SIGPIPE on the fetch-pack end (upload-pack will finish writing a small
pack and goes away).
Disable it unless fetch-pack is running under smart-http, where there is
no such streaming issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
This is a synonym for the existing '-n' option, matching GNU grep.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
* jc/fetch-progressive-stride:
fetch-pack: use smaller handshake window for initial request
fetch-pack: progressively use larger handshake windows
fetch-pack: factor out hardcoded handshake window size
Conflicts:
builtin/fetch-pack.c
When we merge into an unborn branch, there are basically two
steps:
1. Write the sha1 of the new commit into the ref pointed
to by HEAD.
2. Update the index with the new content, and check it out
to the working tree.
We currently do them in this order. However, (2) is the step
that is much more likely to fail, since it can be blocked by
things like untracked working tree files. When it does, the
merge fails and we are left with an empty index but an
updated HEAD.
This patch switches the order, so that a failure in updating
the index leaves us unchanged. Of course, a failure in
updating the ref now leaves us with an updated index and
mis-matched HEAD. That is arguably not much better, but it
is probably less likely to actually happen.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t_e_i() can return -1 or 2 to early shortcut a search. Current code
may use up to two variables to handle it. One for saving return value
from t_e_i temporarily, one for saving return code 2.
The second variable is not needed. If we make sure the first variable
does not change until the next t_e_i() call, then we can do something
like this:
int ret = 0;
while (...) {
if (ret != 2) {
ret = t_e_i();
if (ret < 0) /* no longer interesting */
break;
if (ret == 0) /* skip this round */
continue;
}
/* ret > 0, interesting */
}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes behavior of the two functions. Previously it does
prefix matching only. Now it can also do wildcard matching.
All callers are updated. Some gain wildcard matching (archive,
checkout), others reset pathspec_item.has_wildcard to retain old
behavior (ls-files, ls-tree as they are plumbing).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge" without specifying any commit is a no-op by default.
A new option merge.defaultupstream can be set to true to cause such an
invocation of the command to merge the upstream branches configured for
the current branch by using their last observed values stored in their
remote tracking branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to be very casual in terminology and used <branch>, <ref> and
<rev> more or less interchangeably with <commit>. Match the help text
given by "git merge -h" with that of the documentation.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --min-parents and --max-parents options which limit the
revisions to those commits which have at least (or at most) that many
commits, where negative arguments for --max-parents= denote infinity
(i.e. no upper limit).
In particular:
--max-parents=1 is the same as --no-merges;
--min-parents=2 is the same as --merges;
--max-parents=0 shows only roots; and
--min-parents=3 shows only octopus merges
Using --min-parents=n and --max-parents=m with n>m gives you what you ask
for (i.e. nothing) for obvious reasons, just like when you give --merges
(show only merge commits) and --no-merges (show only non-merge commits) at
the same time.
Also, introduce --no-min-parents and --no-max-parents to do the obvious
thing for convenience.
We compute the number of parents only when we limit by that, so there
is no performance impact when there are no limiters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
* jc/maint-fetch-alt:
fetch-pack: objects in our alternates are available to us
refs_from_alternate: helper to use refs from alternates
Conflicts:
builtin/receive-pack.c
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from builtin_diff_files() is fed to diff_result_code()
by the caller, and all other callees like builtin_diff_index() do not
have their own call to diff_result_code(). Remove the duplicated one
from builtin_diff_files() and let the caller handle it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we had to refresh the index internally before running diff or status,
we opportunistically updated the $GIT_INDEX_FILE so that later invocation
of git can use the lstat(2) we already did in this invocation.
Make them share a helper function to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start the initial request small by halving the INITIAL_FLUSH (we will try
to stay one window ahead of the server, so we would end up giving twice as
many "have" in flight at the very beginning). We may want to tweak these
values even more, taking MTU into account.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
The client has to dig the history deeper when more recent parts of its
history do not have any overlap with the server it is fetching from. Make
the handshake window exponentially larger as we dig deeper, with a
reasonable upper cap.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
The "git fetch" client presents the most recent 32 commits it has to the
server and gives a chance to the server to say "ok, we heard enough", and
continues reporting what it has in chunks of 32 commits, digging its
history down to older commits.
Move the hardcoded size of the handshake window outside the code, so that
we can tweak it more easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
When orphaning a commit on a detached HEAD, the warning
currently looks like:
Warning: you are leaving 3 commits behind, not connected to
any of your branches:
- commit subject 1
- commit subject 2
- commit subject 3
If you want to keep them by creating a new branch, this
may be a good time to do so with:
git branch new_branch_name 933a615ab0bc566dcfd8c01ec8af159f770d3fe5
Instead of using the "-" list, let's provide a more
traditional oneline format, with the abbreviated sha1 before
each subject. Users are accustomed to seeing commits in this
format, and having the sha1 of each commit can be useful if
you want to cherry-pick instead of creating a new branch.
The new format looks like:
Warning: you are leaving 3 commits behind, not connected to
any of your branches:
933a615 commit subject 1
824fcde commit subject 2
fa49b1a commit subject 3
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When leaving a detached HEAD, we do a revision walk to make
sure the commit we are leaving isn't being orphaned.
However, this leaves crufty marks in the commit objects
which can confuse later walkers, like the one in
stat_tracking_info.
Let's clean up after ourselves to prevent this conflict.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* uk/ls-remote-in-get-remote-url:
git-request-pull: open-code the only invocation of get_remote_url
get_remote_url(): use the same data source as ls-remote to get remote urls
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the well-know convention of reading standard input instead of a
named file if "-" (dash) is specified. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper function split from the receiving end of "git push" to
allow the same optimization on the receiving end of "git fetch".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The receiving end of "git push" advertises the objects that the repository
itself does not use, but are at the tips of refs in other repositories
whose object databases are used as alternates for it. This helps it avoid
having to receive (and the pusher having to send) objects that are already
available to the receiving repository via the alternates mechanism.
Tweak the helper function that implements this feature, and move it to
transport.[ch] for future reuse by other programs.
The additional test demonstrates how this optimization is helping "git push",
and "git fetch" is ignorant about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.0-rc0~34 (make "mktag" a built-in, 2010-01-22), git mktag
uses the C99-style %td format to print ptrdiff_t values. It falls
back to %d when NO_C99_FORMAT is set, on the assumption that pre-C99
systems probably are using 32-bit pointers.
But many modern systems are 64-bit and
* sometimes one wants to test the NO_C99_FORMAT fallbacks using a
modern development platform;
* some platforms (I'm looking at you, msvc) have not gotten with the
program and are still C89-only.
These ptrdiff_t values are offsets from the beginning of a buffer, so
a size_t or uintmax_t would work about as well. Use the latter so we
can take advantage of the PRIuMAX fallback in git-compat-util.h, even
on C99-challenged systems with 64-bit pointers.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
Readers uninterested in the details of "git cherry"'s output format
can see
print_commit('-', commit, verbose, abbrev);
and ignore the details.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a add_verbose_info function that takes care of adding
- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject
for the tip commit of a branch, for use in "git branch -v" output.
No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If enabled on the connection "multi_ack_detailed no-done" as a
pair allows the remote upload-pack process to send a PACK down
to the client as soon as a "ACK %s ready" message was also sent.
Over git:// and ssh:// where a bi-directional stream is in place
this has very little difference over the classical version that
waits for the client to send a "done\n" line by itself. It does
slightly reduce the latency involved to start the pack stream as
there is one less round-trip from client->server required.
Over smart HTTP this avoids needing to send a final RPC that has
all of the prior common objects. Instead the server is able to
return a pack as soon as its ready to. For many common users the
smart HTTP fetch is now just 2 requests: GET .../info/refs, and
a POST .../git-upload-pack to not only negotiate but also receive
the pack stream. Only users who have more than 32 local unshared
commits with the remote will need additional requests to negotiate
a common merge base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If multi_ack_detailed was selected in the protocol capabilities
(both client and server are >= Git 1.6.6) the upload-pack side will
send "ACK %s ready" when it knows how to safely cut the graph and
produce a reasonable pack for the want list that was already sent
on the connection.
Upon receiving "ACK %s ready" there is no point in looking at
the remaining commits inside of rev_list. Sending additional
"have %s" lines to the remote will not construct a smaller pack.
It is unlikely a commit older than the current cut point will have
a better delta base than the cut point itself has.
The original design of this code had fetch-pack empty rev_list by
marking a commit and its transitive ancestors COMMON whenever the
remote side said "ACK %s {continue,common}" and skipping over any
already COMMON commits during get_rev(). This approach does not
work when most of rev_list is actually COMMON_REF, commits that
are pointed to by a reference on the remote, which exist locally,
and which have not yet been sent to the remote as a "have %s" line.
Most of the common references are tags in the ref/tags namespace,
using points in the commit graph that are more than 1 commit apart.
In git.git itself, this is currently 340 tags, 339 of which point to
commits in the commit graph. fetch-pack pushes all of these into
rev_list, but is unable to mark them COMMON and discard during a
remote's "ACK %s {continue,common}" because it does not parse through
the entire parent chain. Not parsing the entire parent chain is
an optimization to avoid walking back to the roots of the repository.
Assuming the client is only following the remote (and does not make
its own local commits), the client needs 11 rounds to spin through
the entire list of tags (32 commits per round, ceil(339/32) == 11).
Unfortunately the server knows on the first "have %s" line that
it can produce a good pack, and does not need to see the remaining
320 tags in the other 10 rounds.
Over git:// and ssh:// this isn't as bad as it sounds, the client is
only transmitting an extra 16,000 bytes that it doesn't need to send.
Over smart HTTP, the client must do an additional 10 HTTP POST
requests, each of which incurs round-trip latency, and must upload
the entire state vector of all known common objects. On the final
POST request, this is 16 KiB worth of data.
Fix all of this by clearing rev_list as soon as the remote side
says it can construct a pack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of 7 comes from fairly early in git development, when
seven hex digits was a lot (it covers about 250+ million hash
values). Back then I thought that 65k revisions was a lot (it was what
we were about to hit in BK), and each revision tends to be about 5-10
new objects or so, so a million objects was a big number.
These days, the kernel isn't even the largest git project, and even
the kernel has about 220k revisions (_much_ bigger than the BK tree
ever was) and we are approaching two million objects. At that point,
seven hex digits is still unique for a lot of them, but when we're
talking about just two orders of magnitude difference between number
of objects and the hash size, there _will_ be collisions in truncated
hash values. It's no longer even close to unrealistic - it happens all
the time.
We should both increase the default abbrev that was unrealistically
small, _and_ add a way for people to set their own default per-project
in the git config file.
This is the first step to first make it configurable; the default of 7
is not raised yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate messages that use the `me' variable. These are all error
messages referencing the command name, so the name shouldn't be
translated.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate the "Your local changes [...]" message without using the
`me' variable, instead split up the two messages so translators can
translate the whole messages as-is.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use sprintf format for the error message that's displayed if
GIT_NOTES_REWRITE_MODE is invalid, and leave a note in a TRANSLATORS
comment indicating what the message means.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "Auto packing the repository" message into quiet and
verbose variants to make translation easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "clean.requireForce set/defaults to true..." die()
message to make it easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the tag_template message as translatable with N_() and then use
it later with _(). We need to skip a test under GETTEXT_POISON that
relies on the output having a leading newline.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the ""Unstaged changes after reset:" message. A test in
t7102-reset.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the messages in git-reset that use the reset_type_names static
array to be translatable by marking the array items with N_() and
using _() later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the basic git-mv messages translatable, but skip things like "rm
'%s'\n" and "git rm '%s'\n" for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize messages made by assigning to the "bad" char* variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--name-only/--name-status/--check does not make sense"
messages. A test in t4014-format-patch.sh explicitly checked for these
messages. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--open-files-in-pager only works on the worktree"
message. A test in t7811-grep-open.sh explicitly checked for this
message. Change it to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "(non-fast-forward)" message from printf directives and
make it translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate a "[rejected]" message spotted by Jeff King, and other
things in update_local_ref along with it.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some of the formatting messages that appear on git-fetch
showing how branches/tags etc. were updated.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Please enter the commit message for your changes."
message. Several tests in t7500-commit.sh and t7502-commit.sh assume
that this message starts with a newline. Change the tests to to skip
under GETTEXT_POISON=YesPlease.
These fail under GETTEXT_POISON=YesPlease because the poison editor
message doesn't do the right thing with comments and line breaks, so
these messages will be incorrectly broken up across lines.
This test should not be skipped under a hypothetical future testing
mode that tests Git under language locales, since those messages
should all start with a newline like the original.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(root-commit)" and "detached HEAD" fragments that
appear when you commit either the root commit, or a commit in a
detached head translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You are in the middle of a merge -- cannot amend."
message. Several tests in t7110-reset-merge.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "Switched to and reset branch" and "Switched to a new
branch" messages to make them easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "does not have our/their version" message to make it
easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(no branch)" message that's shown by "git branch" when
you're in a detached HEAD.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "git branch -v" messages translatable, e.g.:
5054b57 [ahead 8] branch error fixup
This is possibly a plumbing message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Deleted %sbranch %s (was %s).\n" messages. test in
t3200-branch.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be done better by splitting it up, but it would change too
much code, which I'm trying to avoid at this point. Instead add a
TRANSLATORS comment to explain what "remote " does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "Unstaged changes after refreshing the index:"
translatable. It's displayed under `git add --refresh --verbose`.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "remove '%s'" message translatable. It's displayed under `git
add -u --verbose`. Also skip the corresponding test when output is not
in the C locale.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "did not match any files" message translatable, and skip the
test that checks for it when the C_LOCALE_OUTPUT prereq is not
present.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests t2204 (.gitignore) and t3700 (add) explicitly check for
these messages, so while at it, split each relevant test into a part
that just checks "git add"'s exit status and a part that checks
porcelain output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the "Cloning into %s" and "Cloning into bare repository %s"
messages to make them easier to translate. No noticeable change
intended.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user visible strings in init-db.c to use gettext
localizations. This only converts messages which needed to be changed
from "foo" to _("foo"), and didn't need any TRANSLATORS comments.
I haven't marked the messages in init_db_usage or init_db_options for
translation, since that would require additional changes in
parse-options.c. Those can be done later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the line number the patch intended to touch does not match
the line in the version being patched, GNU patch reports that
it applied the hunk at a different line number, with how big an
offset.
Teach "git apply" to do the same under --verbose option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
When looking for a place to apply a hunk, we used to check lines that
match the preimage of it, starting from the line that the patch wants to
apply the hunk at, looking forward and backward with increasing offsets
until we find a match.
Colin Guthrie found an interesting case where this misapplied a patch that
wanted to touch a preimage that consists of
}
}
return 0;
}
which is a rather unfortunately common pattern.
The target version of the file originally had only one such location, but
the hunk immediately before that created another instance of such block of
lines, and find_pos() happily reported that the preimage of the hunk
matched what it wanted to modify.
Oops.
By marking the lines application of earlier hunks touched and preventing
match_fragment() from considering them as a match with preimage of other
hunks, we can reduce such an accident.
I also considered to teach apply_one_fragment() to take the offset we have
found while applying the previous hunk into account when looking for a
match with find_pos(), but dismissed that approach, because it would
sometimes work better but sometimes worse, depending on the difference
between the version the patch was created against and the version the
patch is being applied.
This does _not_ prevent misapplication of patches to a file that has many
similar looking blocks of lines and a preimage cannot identify which one
of them should be applied. For that, we would need to scan beyond the
first match in find_pos(), and issue a warning (or error out). That will
be a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_dir must always be non-NULL so "if (git_dir)" is unnecessary.
Before this code, if git_dir == NULL, it will default to
DEFAULT_GIT_DIR_ENVIRONMENT.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common scenario is to create a new branch and push it (checkout -b &&
push [--set-upstream]). In this case, the user was getting "The current
branch %s has no upstream branch.", which doesn't help much.
Provide the user a command to push the current branch. To avoid the
situation in the future, suggest --set-upstream.
While we're there, also improve the error message in the "detached HEAD"
case. We mention explicitly "detached HEAD" since this is the keyword to
look for in documentations.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The formerly implemented algorithm behaved differently to
remote.c:remote_get() at least for remotes that contain a slash. While the
former just assumes a/b is a path the latter checks the config for
remote."a/b" first which is more reasonable.
This removes the last user of git-parse-remote.sh:get_data_source(), so
this function is removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere forget is a destructive command. When invoked without a path, it
operates on the current directory, potentially deleting many recorded
conflict resolutions.
To make the command safer, a path must be specified as of git 1.8.0. Until
then, give users time to write 'git rerere forget .' if they really mean
the entire current directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack v2 .idx file usually records offset using 64-bit representation
only when the offset does not fit within 31-bit, but you can handcraft
your .idx file to record smaller offset using 64-bit, storing all zero
in the upper 4-byte. By inspecting the original idx file when running
index-pack --verify, encode such low offsets that do not need to be in
64-bit but are encoded using 64-bit just like the original idx file so
that we can still validate the pack/idx pair by comparing the idx file
recomputed with the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given an existing .pack file and the .idx file that describes it,
this new mode of operation reads and re-index the packfile and makes
sure the existing .idx file matches the result byte-for-byte.
All the objects in the .pack file are validated during this operation as
well. Unlike verify-pack, which visits each object described in the .idx
file in the SHA-1 order, index-pack efficiently exploits the delta-chain
to avoid rebuilding the objects that are used as the base of deltified
objects over and over again while validating the objects, resulting in
much quicker verification of the .pack file and its .idx file.
This version however cannot verify a .pack/.idx pair with a handcrafted v2
index that uses 64-bit offset representation for offsets that would fit
within 31-bit. You can create such an .idx file by giving a custom offset
to --index-version option to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Adjust all callers to the API change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries in the delta_base array are only grouped by the bytepattern in
the delta_base union, some of which have 20-byte object name of the base
object (i.e. base for REF_DELTA objects), while others have sizeof(off_t)
bytes followed by enough NULs to fill 20-byte. The loops to iterate
through a range inside this array still needs to inspect the type of the
delta, and skip over false hits.
Group the entries also by type to eliminate the potential of false hits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
* uk/checkout-ambiguous-ref:
Rename t2019 with typo "amiguous" that meant "ambiguous"
checkout: rearrange update_refs_for_switch for clarity
checkout: introduce --detach synonym for "git checkout foo^{commit}"
checkout: split off a function to peel away branchname arg
checkout: fix bug with ambiguous refs
Conflicts:
builtin/checkout.c
* nd/struct-pathspec: (22 commits)
t6004: add pathspec globbing test for log family
t7810: overlapping pathspecs and depth limit
grep: drop pathspec_matches() in favor of tree_entry_interesting()
grep: use writable strbuf from caller for grep_tree()
grep: use match_pathspec_depth() for cache/worktree grepping
grep: convert to use struct pathspec
Convert ce_path_match() to use match_pathspec_depth()
Convert ce_path_match() to use struct pathspec
struct rev_info: convert prune_data to struct pathspec
pathspec: add match_pathspec_depth()
tree_entry_interesting(): optimize wildcard matching when base is matched
tree_entry_interesting(): support wildcard matching
tree_entry_interesting(): fix depth limit with overlapping pathspecs
tree_entry_interesting(): support depth limit
tree_entry_interesting(): refactor into separate smaller functions
diff-tree: convert base+baselen to writable strbuf
glossary: define pathspec
Move tree_entry_interesting() to tree-walk.c and export it
tree_entry_interesting(): remove dependency on struct diff_options
Convert struct diff_options to use struct pathspec
...
Currently, it sounds as if "notice removal of files" distinguishes "-A"
from "-u", and there is no mention of the worktree.
But both notice the removal, and only "-A" adds changes from untracked
files. Say so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30,
2007-11-08), a subtle bug in --template was introduced. If the
file named by a --template parameter is missing, previously git
would error out with a message:
Commit template file does not exist.
but in the C version the --template parameter gets ignored and
the default template is used.
t7500 has two tests for this case which would have caught it, except
that with the default $EDITOR, the commit message template is left
unmodified, causing 'git commit' to error out and the test to
succeed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can detach the HEAD at an arbitrary commit in order to browse the
files in various points in the history or build older versions of the
software, without recording any new commit, and come back to an existing
branch. When used in this "sightseer" mode, detached HEAD is a perfectly
safe mechanism. It also is a useful state to experiment with throw-away
commits.
When coming back to an existing branch with "git checkout master",
however, the commits that were created on the detached HEAD will become
unreachable from anywhere but the reflog of the HEAD. Check if the commit
we are about to leave is connected to some ref, and give a final warning
otherwise to remind the user for safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity-check config variable names when adding and retrieving them. As a side
effect code duplication between git_config_set_multivar and get_value (in
builtin/config.c) was removed and the common functionality was placed in
git_config_parse_key.
This breaks a test in t1300 which used invalid section-less keys in the tests
for "git -c". However, allowing such names there was useless, since there was
no way to set them via config file, and no part of git actually tried to use
section-less keys. This patch updates the test to use more realistic examples
as well as adding its own test.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after
a conflicting cherry-pick. While this would preserve the original
commit's authorship, it would sadly discard cherry-pick's carefully
crafted MERGE_MSG (which contains the list of conflicts as well as the
original commit-id in the case of cherry-pick -x).
On the other hand, if a bare 'commit' were performed, it would preserve
the MERGE_MSG while resetting the authorship.
In other words, there was no way to simultaneously take the authorship
from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
This change fixes that situation. A bare 'commit' will now take the
authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
If the user wishes to reset authorship, that must now be done explicitly
via --reset-author.
A side-benefit of passing commit authorship along this way is that we
can eliminate redundant authorship parsing code from revert.c.
(Also removed an unused include from revert.c)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick conflicts git advises:
$ git commit -c <original commit id>
to preserve the original commit message and authorship. Instead, let's
record the original commit id in CHERRY_PICK_HEAD and advise:
$ git commit -c CHERRY_PICK_HEAD
A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part.
Note that we record CHERRY_PICK_HEAD even in the case where there
are no conflicts so that we may use it to communicate authorship to
commit; this will then allow us to remove set_author_ident_env from
revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit
is used, as presumably the user intends to further edit the commit
and possibly even cherry-pick additional commits on top.
Tests and documentation contributed by Jonathan Nieder.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can enable or disable it explicitly with the new
--progress, but it defaults to checking isatty(2).
This works only with merge-recursive and subtree. In theory
we could pass a progress flag to other strategies, but none
of them support progress at this point, so let's wait until
they grow such a feature before worrying about propagating
it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For its post-commit summary, commit was explicitly setting
the default rename limit to 100. Presumably when the code
was added, it was necessary to do so. These days, however,
it will fall back properly to the diff default, and that
default has long since changed from 100.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the find_exact_renames() function, this allows us to pass the
diff_options structure pointer to the low-level routines. We will use
that to distinguish between the "rename" and "copy" cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:
git clone does-not-exist
has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:
git clone does-not-exist new-dir
_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.
This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patch-id trips over our very own diff extension for marking
the absence of newline at EOF.
Fix it. (Ignore it, it's whitespace.)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though fill_directory() takes pathspec, the returned set of paths
is not guaranteed to be free of paths outside the pathspec. Perhaps we
would need to change that, but the current API is that the caller needs
to further filter them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "rerere" resolves conflicts by reusing old resolution, there would
be three kinds of paths with conflict in the index:
* paths that have been resolved in the working tree by rerere;
* paths that need further work whose resolution could be recorded;
* paths that need resolving that rerere won't help.
When the user wants a list of paths that need hand-resolving, output from
"rerere status" does not help, as it shows only the second category, but
the paths in the third category still needs work (rerere only makes sense
for regular files that have both our side and their side, and does not
help other kinds of conflicts, e.g. "we modified, they deleted").
The new subcommand "rerere remaining" can be used to show both. As
opposed to "rerere status", this subcommand also skips printing paths
that have been added to the index, since these paths are already
resolved and are no longer "remaining".
Initial patch provided by Junio. Refactored and modified to skip
resolved paths by Martin. Commit message mostly by Junio.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
pull: do not display fetch usage on --help-all
git-tag.txt: list all modes in the description
commit,status: describe -u likewise
add: describe --patch like checkout, reset
commit,merge,tag: describe -m likewise
clone,init: describe --template using the same wording
commit,status: describe --porcelain just like push
commit,tag: use same wording for -F
configure: use AC_LANG_PROGRAM consistently
string_list_append: always set util pointer to NULL
correct type of EMPTY_TREE_SHA1_BIN
They differ by one character only. Being exactly equal should help
translations.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also removes the superfluous "specify" and rewords the misleading
"if any" which sounds as if omitting "-m" would omit the merge commit
message. (It means "if a merge commit is created at all".)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also corrects a wrong description for clone.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push has the clearer description, so take that one for all.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions such as hashcmp that expect a binary SHA-1 value take
parameters of type "unsigned char *" to avoid accepting a textual
SHA-1 passed by mistake. Unfortunately, this means passing the string
literal EMPTY_TREE_SHA1_BIN requires an ugly cast. Tweak the
definition of EMPTY_TREE_SHA1_BIN to produce a value of more
convenient type.
In the future the definition might change to
extern const unsigned char empty_tree_sha1_bin[20];
#define EMPTY_TREE_SHA1_BIN empty_tree_sha1_bin
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
repo-config was deprecated in 5c66d0d4 on 2008-01-17. Warn the
remaining users that it has been replaced by config and is going to
be removed eventually.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recurse_submodules option was added in ccdd3da6 to bring 'git clone'
into line with 'git fetch' and future commands. The correct option should
have been "recurse-submodules".
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take care of simple, exceptional cases before the meat of the "check
out by branch name" code begins. After this change, the function
vaguely follows the following pseudocode:
if (-B or -b)
create branch;
if (plain "git checkout" or "git checkout HEAD")
;
else if (--detach or checking out by non-branch commit name)
detach HEAD;
else if (checking out by branch name)
attach HEAD;
One nice side benefit is to make it possible to remove handling of
the --detach option from outside switch_branches.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, one might use this when making a temporary merge to
test that two topics work well together.
Patch by Junio, with tests from Jeff King.
[jn: with some extra checks for bogus commandline usage]
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to parse and consume the tree name and "--" in commands such
as "git checkout @{-1} -- '*.c'" is intimidatingly long. Split it out
into a separate function and make it easier to skip on first reading
by making the data it uses and produces more explicit.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --cached" (without revision) used to mean "git diff --cached
HEAD" (i.e. the user was too lazy to type HEAD). This "correctly"
failed when there was no commit yet. But was that correctness useful?
This patch changes the definition of what particular command means.
It is a request to show what _would_ be committed without further "git
add". The internal implementation is the same "git diff --cached HEAD"
when HEAD exists, but when there is no commit yet, it compares the index
with an empty tree object to achieve the desired result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is a random garbage file whose name happens to be 38-byte
long in a .git/objects/??/ directory, the loop terminated prematurely
without marking all the other files that it hasn't checked in the
readdir() loop.
Treat such a file just like any other garbage file, and do not break out
of the readdir() loop.
While at it, replace repeated sprintf() calls to a single one outside the
loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
Instead of stripping space characters past the beginning of the
line and overflowing a buffer, stop at the beginning of the line
(mimicking the corresponding fix in remote-fd).
The argument to isspace does not need to be cast explicitly because
git isspace takes care of that already.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the message advises to fix the configuration first, the
advantage of using this command is that it is cut-and-paste ready,
while using --author='...' requires the user to type his name and
email again.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual dwim_ref lookup prefers tags to branches. Because
checkout primarily works on branches, though, we switch that
behavior to prefer branches.
However, there was a bug in the implementation in which we
used lookup_commit_reference (which used the regular lookup
rules) to get the actual commit to checkout. Checking out an
ambiguous ref therefore ended up putting us in an extremely
broken state in which we wrote the branch ref into HEAD, but
actually checked out the tree for the tag.
This patch fixes the bug by always attempting to pull the
commit to be checked out from the branch-ified version of
the name we were given.
Patch by Junio, tests and commit message from Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, this would allow cherry-picking or reverting patches from
a piece of history with a different end-of-line style, like so:
$ git revert -Xrenormalize old-problematic-commit
Currently that is possible with manual use of merge-recursive but the
cherry-pick/revert porcelain does not expose the functionality.
While at it, document the existing support for --strategy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
This logic is now only used by cmd_init_db(). setup_* functions do not
rely on it any more. Move all the logic to cmd_init_db() and turn
get_git_work_tree() into a simple function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_git_work_tree() takes input as core.worktree, core.bare,
GIT_WORK_TREE and decides correct worktree setting.
Unfortunately it does not do its job well. core.worktree and
GIT_WORK_TREE should only be taken into account, if GIT_DIR is set
(which is handled by setup_explicit_git_dir). For other setup cases,
only core.bare matters.
Add a temporary variable setup_explicit to adjust get_git_work_tree()
behavior as such. This variable will be gone once setup_* rework is
done.
Also remove is_bare_repository_cfg check in set_git_work_tree() to
ease the rework. We are going to check for core.bare and core.worktree
early before setting worktree. For example, if core.bare is true, no
need to set worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When determine_author_info() returns to the calling prepare_to_commit(),
we already know the pieces of information necessary to determine what
author ident will be used in the final message, but deferred making a call
to fmt_ident() before the final commit_tree(). Most importantly, we would
open the editor to ask the user to compose the log message before it.
As one important side effect of fmt_ident() is to error out when the given
information is malformed, this resulted in us spawning the editor first
and then refusing to commit due to error, even though we had enough
information to detect the error before starting the editor, which was
annoying.
Move the fmt_ident() call to the end of determine_author_info() where we
have final determination of author info to rectify this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
* jn/parse-options-extra:
update-index: migrate to parse-options API
setup: save prefix (original cwd relative to toplevel) in startup_info
parse-options: make resuming easier after PARSE_OPT_STOP_AT_NON_OPTION
parse-options: allow git commands to invent new option types
parse-options: never suppress arghelp if LITERAL_ARGHELP is set
parse-options: do not infer PARSE_OPT_NOARG from option type
parse-options: sanity check PARSE_OPT_NOARG flag
parse-options: move NODASH sanity checks to parse_options_check
parse-options: clearer reporting of API misuse
parse-options: Don't call parse_options_check() so much
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
All files that include this header file use the same four line
incantation:
#ifndef NO_PTHREADS
#include <pthread.h>
#include "thread-utils.h"
#endif
Move the responsibility for that gymnastics to the header file from the
files that include it. This approach makes it easier to later declare new
services that are related to threading in thread-utils.h and have them
available to all the threading code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that struct commit.util is not used until after we've checked that
the argument doesn't exactly match a tag, we can wait until then to
look up the commits for each tag.
This avoids a lot of I/O on --exact-match queries in repositories with
many tags. For example, 'git describe --exact-match HEAD' becomes
about 12 times faster on a cold cache (3.2s instead of 39s) in a
linux-2.6 repository with 2000 packed tags. That is a huge win for the
interactivity of the __git_ps1 shell prompt helper when on a detached
HEAD.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
describe is currently forced to look up the commit at each tag in
order to store the struct commit_name pointers in struct commit.util.
For --exact-match queries, those lookups are wasteful. In preparation
for removing them, put the commit_names into a hash table, indexed by
commit SHA1, that can be used to quickly check for exact matches.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now add_to_known_names overwrites commit_names in place when multiple
tags point to the same commit. This will make it easier to store
commit_names in a hash table.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't waste time checking for dangling refs; they wouldn't affect the
output of 'git describe' anyway. Although this does not gain much
performance by itself, it does in conjunction with the next commits.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
--refresh and --really-refresh accept flags (like -q) and modify
an error indicator. It might make sense to make the error
indicator global, but just pass the flags and a pointer to the error
indicator in a struct instead.
--cacheinfo wants 3 arguments. Use the OPTION_LOWLEVEL_CALLBACK
extension to grab them and PARSE_OPT_NOARG to disallow the "sticked"
--cacheinfo=foo form. (The resulting message
$ git update-index --cacheinfo=foo
error: option `cacheinfo' takes no value
is unfortunately incorrect.)
--assume-unchanged and --no-assume-unchanged probably should use the
OPT_UYN feature; but use a callback for now so the existing MARK_FLAG
and UNMARK_FLAG values can be used.
--stdin and --index-info are still constrained to be the last argument
(implemented using the OPTION_LOWLEVEL_CALLBACK extension).
--unresolve and --again consume all arguments that come after them
(also using OPTION_LOWLEVEL_CALLBACK).
The order of options matters. Each path on the command line is
affected only by the options that come before it. A custom
argument-parsing loop with parse_options_step() brings that about.
In exchange for all the fuss, we get the usual perks: support for
un-sticked options, better usage error messages, more useful -h
output, and argument parsing code that should be easier to tweak
in the future.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_options_check() is being called for each invocation of
parse_options_step which can be quite a bit for some commands. The
commit introducing this function cb9d398 (parse-options: add
parse_options_check to validate option specs., 2009-06-09) had the
correct motivation and explicitly states that parse_options_check()
should be called from parse_options_start(). However, the implementation
differs from the motivation. Fix it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
* sn/diff-doc:
docs: clarify git diff modes of operation
diff,difftool: Don't use the {0,2} notation in usage strings
CodingGuidelines: Add a section on writing documentation
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit_list prefix to insert_by_date function and to sort_by_date,
so it's clear that these functions refer to commit_list structure.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/phrase-remote-tracking:
git-branch.txt: mention --set-upstream as a way to change upstream configuration
user-manual: remote-tracking can be checked out, with detached HEAD
user-manual.txt: explain better the remote(-tracking) branch terms
Change incorrect "remote branch" to "remote tracking branch" in C code
Change incorrect uses of "remote branch" meaning "remote-tracking"
Change "tracking branch" to "remote-tracking branch"
everyday.txt: change "tracking branch" to "remote-tracking branch"
Change remote tracking to remote-tracking in non-trivial places
Replace "remote tracking" with "remote-tracking"
Better "Changed but not updated" message in git-status
Pass output through the pager if format-patch is run with --stdout. This
saves the user the trouble of running git with '-p' or piping through a
pager.
setup_pager() already checks if stdout is a tty, so we don't have to
worry about behaviour if the user redirects/pipes stdout. Paging can
also be disabled with the config
[pager]
format-patch = false
Add tests to check for these behaviour.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with pthread support, transport-helper.c needs to include
necessary header files. Also fix a few error messages in remote-ext and
remote-fd programs, and a potential buffer underrun in remote-fd.
In the documentation, clarify how %G and %V are used; the old description
looked as if they take repository/vhost parameters, which was wrong.
Also fix AsciiDoc markup for the page title of remote-fd/remote-ext manpages,
and tweak the way how section headers are shown.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/push-progress:
push: pass --progress down to git-pack-objects
t5523-push-upstream: test progress messages
t5523-push-upstream: add function to ensure fresh upstream repo
test_terminal: ensure redirections work reliably
test_terminal: catch use without TTY prerequisite
test-lib: allow test code to check the list of declared prerequisites
tests: test terminal output to both stdout and stderr
tests: factor out terminal handling from t7006
baselen used to be the result of common_prefix() when it was made
builtin. Since 1d8842d (Add 'fill_directory()' helper function for
directory traversal - 2009-05-14), its value will always be
zero. Remove it because it's no longer variable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git merge' the --abort option, which verifies the existence of
MERGE_HEAD and then invokes 'git reset --merge' to abort the current
in-progress merge and attempt to reconstruct the pre-merge state.
The reason for adding this option is to provide a user interface for
aborting an in-progress merge that is consistent with the interface
for aborting a rebase ('git rebase --abort'), aborting the application
of a patch series ('git am --abort'), and aborting an in-progress notes
merge ('git notes merge --abort').
The patch includes documentation and testcases that explain and verify
the various scenarios in which 'git merge --abort' can run. The
testcases also document the cases in which 'git merge --abort' is
unable to correctly restore the pre-merge state (look for the '###'
comments towards the bottom of t/t7609-merge-abort.sh).
This patch has been improved by the following contributions:
- Jonathan Nieder: Move test documentation into test_description
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder the initial part of builtin/merge.c:cmd_merge() so that command-line
options are parsed _before_ we load the index and check for MERGE_HEAD
(and exits if it exists). This does not change the behaviour of 'git merge',
but is needed in preparation for the implementation of 'git merge --abort'
(which requires MERGE_HEAD to be present).
This patch has been improved by the following contributions:
- Junio C Hamano: fixup minor style issues
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Script may use 'git notes get-ref' to easily retrieve the current notes ref.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new strategy is similar to "concatenate", but in addition to
concatenating the two note candidates, this strategy sorts the resulting
lines, and removes duplicate lines from the result. This is equivalent to
applying the "cat | sort | uniq" shell pipeline to the two note candidates.
This strategy is useful if the notes follow a line-based format where one
wants to avoid duplicate lines in the merge result.
Note that if either of the note candidates contain duplicate lines _prior_
to the merge, these will also be removed by this merge strategy.
The patch also contains tests and documentation for the new strategy.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When manually resolving a notes merge, if the merging ref has moved since
the merge started, we should fail to complete the merge, and alert the user
to what's going on.
This situation may arise if you start a 'git notes merge' which results in
conflicts, and you then update the current notes ref (using for example
'git notes add/copy/amend/edit/remove/prune', 'git update-ref', etc.),
before you get around to resolving the notes conflicts and calling
'git notes merge --commit'.
We detect this situation by comparing the first parent of the partial merge
commit (which was created when the merge started) to the current value of the
merging notes ref (pointed to by the .git/NOTES_MERGE_REF symref).
If we don't fail in this situation, the notes merge commit would overwrite
the updated notes ref, thus losing the changes that happened in the meantime.
The patch includes a testcase verifying that we fail correctly in this
situation.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This brings notes merge in line with regular merge's behaviour.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the notes merge conflicts in .git/NOTES_MERGE_WORKTREE have been
resolved, we need to record a new notes commit on the appropriate notes
ref with the resolved notes.
This patch implements 'git notes merge --commit' which the user should
run after resolving conflicts in the notes merge worktree. This command
finalizes the notes merge by recombining the partial notes tree from
part 1 with the now-resolved conflicts in the notes merge worktree in a
merge commit, and updating the appropriate ref to this merge commit.
In order to correctly finalize the merge, we need to keep track of three
things:
- The partial merge result from part 1, containing the auto-merged notes.
This is now stored into a ref called .git/NOTES_MERGE_PARTIAL.
- The unmerged notes. These are already stored in
.git/NOTES_MERGE_WORKTREE, thanks to part 1.
- The notes ref to be updated by the finalized merge result. This is now
stored in a symref called .git/NOTES_MERGE_REF.
In addition to "git notes merge --commit", which uses the above details
to create the finalized notes merge commit, this patch also implements
"git notes merge --reset", which aborts the ongoing notes merge by simply
removing the files/directory described above.
FTR, "git notes merge --commit" reuses "git notes merge --reset" to remove
the information described above (.git/NOTES_MERGE_*) after the notes merge
have been successfully finalized.
The patch also contains documentation and testcases for the two new options.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Fix nonsense sentence in --commit description
- Sverre Rabbelier: Rename --reset to --abort
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts (that are to be resolved manually) are written into a special-
purpose working tree, located at .git/NOTES_MERGE_WORKTREE. Within this
directory, conflicting notes entries are stored (with conflict markers
produced by ll_merge()) using the SHA1 of the annotated object. The
.git/NOTES_MERGE_WORKTREE directory will only contain the _conflicting_
note entries. The non-conflicting note entries (aka. the partial merge
result) are stored in 'local_tree', and the SHA1 of the resulting commit
is written to 'result_sha1'. The return value from notes_merge() is -1.
The user is told to edit the files within the .git/NOTES_MERGE_WORKTREE
directory in order to resolve the conflicts.
The patch also contains documentation and testcases for the correct setup
of .git/NOTES_MERGE_WORKTREE.
The next part will recombine the partial notes merge result with the
resolved conflicts in .git/NOTES_MERGE_WORKTREE to produce the complete
merge result.
This patch has been improved by the following contributions:
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new -s/--strategy command-line option to 'git notes merge' allow the user
to choose how notes merge conflicts should be resolved. There are four valid
strategies to choose from:
1. "manual" (the default): This will let the user manually resolve conflicts.
This option currently fails with an error message. It will be implemented
properly in future patches.
2. "ours": This automatically chooses the local version of a conflict, and
discards the remote version.
3. "theirs": This automatically chooses the remote version of a conflict, and
discards the local version.
4. "union": This automatically resolves the conflict by appending the remote
version to the local version.
The strategies are implemented using the combine_notes_* functions from the
notes.h API.
The patch also includes testcases verifying the correct implementation of
these strategies.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Stephen Boyd: Use correct option name
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This continuation of the 'git notes merge' implementation teaches notes-merge
to properly do real merges between notes trees: Two diffs are performed, one
from $base to $remote, and another from $base to $local. The paths in each
diff are normalized to SHA1 object names. The two diffs are then consolidated
into a single list of change pairs to be evaluated. Each change pair consist
of:
- The annotated object's SHA1
- The $base SHA1 (i.e. the common ancestor notes for this object)
- The $local SHA1 (i.e. the current notes for this object)
- The $remote SHA1 (i.e. the to-be-merged notes for this object)
From the pair ($base -> $local, $base -> $remote), we can determine the merge
result using regular 3-way rules. If conflicts are encountered in this
process, we fail loudly and exit (conflict handling to be added in a future
patch), If we can complete the merge without conflicts, the resulting
notes tree is committed, and the current notes ref updated.
The patch includes added testcases verifying that we can successfully do real
conflict-less merges.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Junio C Hamano: fixup minor style issues
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create new function create_notes_commit() which is slightly more general than
commit_notes() (accepts multiple commit parents and does not auto-update the
notes ref). This function will be used by the notes-merge functionality in
future patches.
Also rewrite builtin/notes.c:commit_notes() to reuse this new function.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This initial implementation of 'git notes merge' only handles the trivial
merge cases (i.e. where the merge is either a no-op, or a fast-forward).
The patch includes testcases for these trivial merge cases.
Future patches will extend the functionality of 'git notes merge'.
This patch has been improved by the following contributions:
- Stephen Boyd: Simplify argc logic
- Stephen Boyd: Use test_commit
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
- Jonathan Nieder: Add constants for common verbosity values
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Jonathan Nieder: Remove extraneous show() function
- Jonathan Nieder: Clarify handling of empty/missing notes ref in notes_merge()
- Junio C Hamano: fixup minor style issues
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_notes_ref() is a new function that performs the DWIM transformation
of "foo" -> "refs/notes/foo" where notes refs are expected.
This is done in preparation for future patches which will also need this
DWIM functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combine_notes_fn functions uses a non-zero return value to indicate
failure. However, this return value was converted to a call to die()
in note_tree_insert().
Instead, propagate this return value out to add_note(), and return it
from there to enable the caller to handle errors appropriately.
Existing add_note() callers are updated to die() upon failure, thus
preserving the current behaviour. The only exceptions are copy_note()
and notes_cache_put() where we are able to propagate the add_note()
return value instead.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Jonathan Nieder: Improve clarity of final if-condition in note_tree_insert()
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
qname is the result of quote_path_relative(), which does
quote_c_style_counted() internally. Remove the hard-coded quotes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE
et.al. to simplify defining -f/--force options.
Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be quiet". Also make use
of the macro in a place that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "dry run". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be verbose". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case HEAD does not point to a valid commit yet, merge is
implemented as a hard reset. This will cause untracked files to be
overwritten.
Instead, assume the empty tree for HEAD and do a regular merge. An
untracked file will cause the merge to abort and do nothing. If no
conflicting files are present, the merge will have the same effect
as a hard reset.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) added support for excluded() where dtype can be NULL. It
was designed specifically for index matching because there was no
other way to extract dtype information from index. It did not support
wildcard matching (for example, "a*/" pattern would fail to match).
The code was probably misread when commit 108da0d (git add: Add the
"--ignore-missing" option for the dry run - 2010-07-10) was made
because DT_UNKNOWN happens to be zero (NULL) too.
Do not pass DT_UNKNOWN/NULL to excluded(), instead pass a pointer to a
variable that contains DT_UNKNOWN. The real dtype will be extracted
from worktree by excluded(), as expected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
old_try_to_free_routine is not meant for use from other files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the factored out code for sig detection when displaying tags.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the factored out code for sig detection when editing existing
tag bodies (tag -a -f without -m).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
into tag.h/c for later reuse and modification.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stat-dirty index is not a detail that ought to concern the operator
of porcelain such as "git cherry-pick".
Without this change, a cherry-pick after copying a worktree with rsync
errors out with a misleading message.
$ git cherry-pick build/top
error: Your local changes to 'file.h' would be overwritten by merge. Aborting.
Please, commit your changes or stash them before you can merge.
Noticed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like '-08:00' instead of
'-0800' in their ---/+++ lines (e.g. http://lwn.net/Articles/131729/).
Take this into account when searching for the start of the timezone
(which is the end of the filename).
This does not actually affect the outcome of patching unless (1) a
file being patched has a non-' ' whitespace character (e.g., tab) in
its filename, or (2) the patch is whitespace-damaged, so the tab
between filename and timestamp has been replaced with spaces.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the case when the patch is a rename or mode-change only
and -p is used with a value greater than one.
The git_header_name function did not remove more than one path
component.
Signed-off-by: Federico Cuello <fedux@lugmen.org.ar>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.6.5 "git clone" honors the --recursive option to recursively check
out submodules too. As this option can easily be misinterpreted when it is
added to other commands like "git grep", add the new --recurse-submodules
option as an alias for --recursive so the same option can be used for all
commands recursing into submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was the only occurence of that usage, and square brackets are
sufficient and already well-established for that purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"squash! ..." where "..." is the subject line of the specified commit
message. This option can be used with other commit message options
such as -m, -c, -C and -F.
If an editor is invoked (as with -c or -eF or no message options) the
commit message is seeded with the correctly formatted subject line.
Example usage:
$ git commit --squash HEAD~2
$ git commit --squash HEAD~2 -m "clever comment"
$ git commit --squash HEAD~2 -F msgfile
$ git commit --squash HEAD~2 -C deadbeef
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"fixup! ..." where "..." is the subject line of the specified commit
message.
Example usage:
$ git commit --fixup HEAD~2
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin/commit.c: Replace block of code with a one-liner call to
logmsg_reencode().
* commit.c: new function for looking up a comit by name
* pretty.c: helper methods for getting output encodings
Add helpers get_log_output_encoding() and
get_commit_output_encoding() that eliminate some messy and duplicate
if-blocks.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually when applying a binary diff generated without
--binary, it will be rejected early, as we don't even have
the full sha1 of the pre- and post-images.
However, if the diff is generated with --full-index (but not
--binary), then we will actually try to apply it. If we have
the postimage blob, then we can take a shortcut and never
even look at the binary diff at all (e.g., this can happen
when rebasing changes within a repository).
If we don't have the postimage blob, though, we try to look
at the actual fragments, of which there are none, and get a
segfault. This patch checks explicitly for that case and
complains to the user instead of segfaulting. We need to
keep the check at a low level so that the "shortcut" case
above continues to work.
We also add a test that demonstrates the segfault. While
we're at it, let's also explicitly test the shortcut case.
Reported-by: Rafaël Carré <rafael.carre@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, packing valid objects could fail when creating a thin pack
simply because a pack edge object used as a preferred base is corrupted.
Since preferred base objects are not strictly needed to produce a valid
pack, let's not consider the inability to read them as a fatal error.
Delta compression may well be attempted against other objects in the
search window. To avoid warning storms (we are in the inner loop of
the delta search window) a warning is emitted only on the first
occurrence.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to fix up a corrupt repository, one might prefer that
"update-index -h" print an accurate usage message and exit rather
than reading the repository and complaining about the corruption.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make sure "git <command> -h" works correctly
when run from distractingly bad repositories.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to avoid git <command> -h being distracted by
access to the repository. A caller hoping to use "git ls-files"
with an alternate index as part of a repair operation may well use
"git ls-files -h" to show usage while planning it out.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a request for command-line usage information rather than some
more substantial action, the only friendly thing to do is to report
the usage information as soon as possible and exit.
Without this change, as "git gc" glances over the repository, it can
be distracted by the desire to report a malformed configuration file.
Noticed while working through reports from Duy's repository access
checker.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" and "git commit" read .git/config and .gitmodules before
parsing options, but there is no reason to access a repository at all
when the caller just wanted to know what arguments are accepted.
[jn: rewrote the log message and added test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index loads the index before parsing options. Erroring out
is counterproductive at that point if the operator is hunting for a
command to recover useful data from the broken repository.
[jn: new commit message, tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for "git branch -h" to try to access a repository.
In the spirit of v1.6.6-rc0~34^2~3 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09). This brings git one step closer to
passing the following (automatically verifiable) test:
Before any repository access (aside from git_config()), a
function from the setup_git_directory_* family has been run
and thus one step closer to being able to use an automatic repository
access checker.
[jn: simplified; new commit message, test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option -e (or --show-email) to git-blame that will display
the author's email instead of name on each line. This option works
for both git-blame and git-annotate.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing via builtin transports (like file://, git://), the
underlying transport helper (in this case, git-pack-objects) did not get
the --progress option, even if it was passed to git push.
Fix this, and update the tests to reflect this.
Note that according to the git-pack-objects documentation, we can safely
apply the usual --progress semantics for the transport commands like
clone and fetch (and for pushing over other smart transports).
Reported-by: Chase Brammer <cbrammer@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Saying "pack-objects died with strange error" after "pack-objects died
of signal 13" seems kind of redundant. The latter message was
introduced when the run-command API changed to report abnormal exits
on behalf of the caller (v1.6.5-rc0~86^2~5, 2009-07-04).
Similarly, after a controlled pack-objects failure (detectable as a
normal exit with nonzero status), a "died with strange error" message
would be redundant next to the message from pack-objects itself.
So leave off the "strange error" messages.
The result should look something like this:
$ git push sf master
Counting objects: 21542, done.
Compressing objects: 100% (4179/4179), done.
fatal: Unable to create temporary file: Permission denied
error: pack-objects died of signal 13
error: failed to push some refs to 'ssh://sf.net/gitroot/project/project'
$
Or in the "controlled exit" case (contrived example):
[...]
fatal: delta size changed
error: failed to push some refs to 'ssh://example.com/foo/bar'
$
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b541248 (merge.conflictstyle: choose between "merge" and "diff3
-m" styles, 2008-08-29), git-merge-file uses setup_directory_gently(),
thus cd'ing around to find any possible config files to use.
This broke merge-file when it is called from within a subdirectory of
a repository, and the arguments are all relative paths.
Fix by prepending the prefix, as passed down from the main git
setup code, if there is any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like ‘-08:00’ instead of
‘-0800’ (e.g. http://lwn.net/Articles/131729/), so git apply would
fail to recognize the epoch timestamp of deleted files and would
create empty files instead. Teach it to support both formats, and add
a test case.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper invokes external command and passes raw smart transport
stream through it. This is useful for instance for invoking ssh with
one-off odd options, connecting to git services in unix domain
sockets, in abstract namespace, using TLS or other secure protocols,
etc...
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper reflects raw smart remote transport stream back to the
calling program. This is useful for example if some UI wants to handle
ssh itself and not use hacks via GIT_SSH.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `<file>' argument is optional in both cases (the man pages are
already correct).
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it cosistent with other places (including the
git-pack-objects(1) manpage itself) and avoids possible confusion (I,
for one, mistook `<object-list' for a `<object-list>' typo at first when
preparing this series).
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This buffer is freed by the C runtime when commit-tree exits moments
later, but freeing it explicitly should make valgrind quieter.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-clone: describe --mirror more verbosely
do not depend on signed integer overflow
work around buggy S_ISxxx(m) implementations
xdiff: cast arguments for ctype functions to unsigned char
init: plug tiny one-time memory leak
diffcore-pickaxe.c: remove unnecessary curly braces
t3020 (ls-files-error-unmatch): remove stray '1' from end of file
setup: make sure git dir path is in a permanent buffer
environment.c: remove unused variable
git-svn: fix processing of decorated commit hashes
git-svn: check_cherry_pick should exclude commits already in our history
Documentation/git-svn: discourage "noMetadata"
Signed integer overflow is not defined in C, so do not depend on it.
This fixes a problem with GCC 4.4.0 and -O3 where the optimizer would
consider "consumed_bytes > consumed_bytes + bytes" as a constant
expression, and never execute the die()-call.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The buffer used to construct paths like ".git/objects/info" and
".git/objects/pack" is allocated on the heap and never freed.
So free it. While at it, factor out the relevant code into its own
function and rename the sha1_dir variable to object_directory (to
match the change in everyday usage after the renaming of
SHA1_FILE_DIRECTORY in v0.99~603^2~7, 2005).
Noticed by valgrind while setting up tests (in test-lib).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix typo in pack-objects' usage
Make sure that git_getpass() never returns NULL
t0004 (unwritable files): simplify error handling
rev-list-options: clarify --parents and --children
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rr/fmt-merge-msg:
t6200-fmt-merge-msg: Exercise '--log' to configure shortlog length
t6200-fmt-merge-msg: Exercise 'merge.log' to configure shortlog length
merge: Make 'merge.log' an integer or boolean option
merge: Make '--log' an integer option for number of shortlog entries
fmt_merge_msg: Change fmt_merge_msg API to accept shortlog_len
Conflicts:
builtin/merge.c
be a little more verbose about what each option does
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick will segfault when transplanting a root commit if the --ff
option is used. This happens because the "parent" pointer is set to NULL
when the commit being cherry-picked has no parents. Later, when "parent"
is dereferenced, the cherry-pick segfaults.
Fix this by checking whether "parent" is NULL before dereferencing it and
add a test for this case of cherry-picking a root commit with --ff.
Reported-by: Zbyszek Szmek <zbyszek@in.waw.pl>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, read-tree can be run without tree-ish arguments, in which
case it will empty the index. Since this behavior is undocumented and
perhaps a bit too invasive to be the "default" action for read-tree,
deprecate it in favor of a new --empty option that does the same thing.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save future readers the trouble of tracing code to determine that the two
uses of branch->remote_name are safe when has_merge is set, by adding a
comment explaining that it is so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'merge.log' an integer or boolean option to set the number of
shortlog entries to display in the merge commit. Note that it defaults
to false, and that true means a default value of 20. Also update
corresponding documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the command-line '--log' option from a boolean option to an
integer option, and parse the optional integer provided on the
command-line into the 'shortlog_len' variable. Also update the
documentation accordingly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give "shortlog_len" parameter to the fmt_merge_msg(), remove its
"merge_summary" parameter, and remove fmt_merge_msg_shortlog() function.
In the updated API, shortlog_len == 0 means no shortlog is given.
The parameter "merge_title" controls if the title of the merge commit is
autogenerated (it reads something like "Merge branch ..."), and typically
it is set to true when the caller does not give its own message.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
t9350 sets up a commit where a file is both copied and renamed. The output
of fast-export for this commit should look like this:
author ...
committer ...
from :19
C "file2" "file4"
R "file2" "file5"
The order of the two modification lines is derived from the result that
the diff machinery produces.
060df62 (fast-export: Fix output order of D/F changes) inserted a qsort
call that modifies the order of the diff result. Unfortunately, qsort need
not be stable. Therefore, it is possible that the 'R' line appears before
the 'C' line and the resulting fast-import stream is incorrect.
Fix it by forcing that the rename entry is printed after all other
modification lines with the same file name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
* jn/apply-filename-with-sp:
apply: handle traditional patches with space in filename
tests: exercise "git apply" with weird filenames
apply: split quoted filename handling into new function
* jn/merge-custom-no-trivial:
t7606: Avoid using head as a file name
merge: let custom strategies intervene in trivial merges
t7606 (merge-theirs): modernize style
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
This improves the usage output by adding builtin_merge_recursive_usage string
that follows the same pattern used by the other builtin commands.
The previous output for git merger-recursive was:
usage: merge-recursive <base>... -- <head> <remote> ...
Now the output is:
usage: git merge-recursive <base>... -- <head> <remote> ...
Since cmd_merge_recursive is used to handle four different commands we need
the %s in the usage string, so the following example:
$ git merge-subtree -h
Will output:
usage: git merge-subtree <base>... -- <head> <remote> ...
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only this makes the code clearer since setting up the porcelain error
message is meant to work with show_all_errors, but this fixes a call to
setup_unpack_trees_porcelain() in git_merge_trees() which did not set
show_all_errors.
add_rejected_path() used to double-check whether it was running in
plumbing mode. This check was ineffective since it was setting
show_all_errors too late for traverse_trees() to see it, and is made
useless by this patch. Remove it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation patch to let setup_unpack_trees_porcelain set
show_all_errors itself.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is currently dealing only with error messages, but the
intent of calling it is really to notify the unpack-tree mechanics that
it is running in porcelain mode.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
* en/d-f-conflict-fix:
merge-recursive: Avoid excessive output for and reprocessing of renames
merge-recursive: Fix multiple file rename across D/F conflict
t6031: Add a testcase covering multiple renames across a D/F conflict
merge-recursive: Fix typo
Mark tests that use symlinks as needing SYMLINKS prerequisite
t/t6035-merge-dir-to-symlink.sh: Remove TODO on passing test
fast-import: Improve robustness when D->F changes provided in wrong order
fast-export: Fix output order of D/F changes
merge_recursive: Fix renames across paths below D/F conflicts
merge-recursive: Fix D/F conflicts
Add a rename + D/F conflict testcase
Add additional testcases for D/F conflicts
Conflicts:
merge-recursive.c
* jn/paginate-fix:
t7006 (pager): add missing TTY prerequisites
merge-file: run setup_git_directory_gently() sooner
var: run setup_git_directory_gently() sooner
ls-remote: run setup_git_directory_gently() sooner
index-pack: run setup_git_directory_gently() sooner
config: run setup_git_directory_gently() sooner
bundle: run setup_git_directory_gently() sooner
apply: run setup_git_directory_gently() sooner
grep: run setup_git_directory_gently() sooner
shortlog: run setup_git_directory_gently() sooner
git wrapper: allow setup_git_directory_gently() be called earlier
setup: remember whether repository was found
git wrapper: introduce startup_info struct
Conflicts:
builtin/index-pack.c
* jn/maint-setup-fix:
setup: split off a function to handle ordinary .git directories
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
Conflicts:
builtin/index-pack.c
Extend remove_note() in the notes API to return whether or not a note was
actually removed. Use this in 'git notes remove' to skip the creation of
a notes commit when no notes were actually removed.
Also add a test illustrating the change in behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git status" and the diff family the submodule.*.ignore settings from
.git/config and .gitmodules can be used to override the default set via
diff.ignoreSubmodules on a per-submodule basis. Let's do this consistently
and teach checkout to use these settings too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the topmost three commits in a branch were merge commits, 'git
format-patch -3' used to output nothing. Since Git can't prepare
patches out of merge commits anyway, don't go over them in the first
place. 'git format-patch -3' now prepares three patches from the
topmost three commits without counting merge commits. Also add a
corresponding test in t4014-format-patch and update documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When objectname:short was introduced, it forgot to copy the result of
find_unique_abbrev. Because the result of find_unique_abbrev is a
pointer to static buffer, this resulted in the same value being
substituted in for each ref.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the merge-recursive strategy a --patience option to use the
"patience diff" algorithm, which tends to improve results when
cherry-picking a patch that reorders functions at the same time as
refactoring them.
To support this, struct merge_options and ll_merge_options gain an
xdl_opts member, so programs can use arbitrary xdiff flags (think
"XDF_IGNORE_WHITESPACE") in a git-aware merge.
git merge and git rebase can be passed the -Xpatience option to
use this.
[jn: split from --ignore-space patch; with documentation]
Signed-off-by: Justin Frankel <justin@cockos.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keeping track of the flag bits is proving more trouble than it's
worth. Instead, use a pointer to an options struct like most similar
APIs do.
Callers with no special requests can pass NULL to request the default
options.
Cc: Bert Wesarg <bert.wesarg@googlemail.com>
Cc: Avery Pennarun <apenwarr@gmail.com>
Helped-by: Justin Frankel <justin@cockos.com>
Helped-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two very similar blocks of code that recognize options for
the "recursive" merge strategy. Unify them.
No functional change intended.
Cc: Avery Pennarun <apenwarr@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git fetch' is supplied a single argument, it tries to match it
against a configured remote and then fetch the refs specified by the
named remote's fetchspec. Additionally, or alternatively, if the current
branch has a merge ref configured, and if the name of the remote supplied
to fetch matches the one in the branch's configuration, then git also adds
the merge ref to the list of refs to update.
If the argument to fetch does not specify a named remote, or if the name
supplied does not match the remote configured for the current branch, then
the current branch's merge configuration should not be considered.
git currently mishandles the case when the argument to fetch specifies a
GIT URL(i.e. not a named remote) and the current branch has a configured
merge ref. In this case, fetch should ignore the branch's merge ref and
attempt to fetch from the remote repository's HEAD branch. But, since
fetch only checks _whether_ the current branch has a merge ref configured,
and does _not_ check whether the branch's configured remote matches the
command line argument (until later), it will mistakenly enter the wrong
branch of an 'if' statement and will not fall back to fetch the HEAD branch.
The fetch ends up doing nothing and returns with a successful zero status.
Fix this by comparing the remote repository's name to the branch's remote
name, in addition to whether it has a configured merge ref, sooner, so that
fetch can correctly decide whether the branch's configuration is interesting
or not, and fall back to fetching from the remote's HEAD branch when
appropriate.
This fixes the test in t5510.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git checkout' reports uncommitted changes, it also does so for
submodules.
The default mode is now to look really hard into submodules, not only
for different commits, but also for modified files. Since this can be
pretty expensive when there are a lot (and large) submodules, there is
the diff.ignoreSubmodules option.
Let's respect that setting when 'git checkout' reports the uncommitted
changes, since it does nothing else than a 'git diff --name-status'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We start the pager too early for several git commands, which results in
the errors sometimes going to the pager rather than show up as errors.
This is often hidden by the fact that we pass in '-X' to less by default,
which causes 'less' to exit for small output, but if you do
export LESS=-S
you can then clearly see the problem by doing
git log --prretty
which shows the error message ("fatal: unrecognized argument: --prretty")
being sent to the pager.
This happens for pretty much all git commands that use USE_PAGER, and then
check arguments separately. But "git diff" does it too early too (even
though it does an explicit setup_pager() call)
This only fixes it for the trivial "git log" family case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
When you call "git reset --mixed <paths>" git will warn that using mixed
with paths is deprecated:
warning: --mixed option is deprecated with paths.
That doesn't tell the user what he should use instead. Expand on the
warning and tell the user to just omit --mixed:
warning: --mixed with paths is deprecated; use 'git reset -- <paths>' instead
The exact wording of the warning was suggested by Jonathan Nieder.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To discover filenames from the --- and +++ lines in a traditional
unified diff, currently "git apply" scans forward for a whitespace
character on each line and stops there. It can't use the whole line
because "diff -u" likes to include timestamps, like so:
--- foo 2000-07-12 16:56:50.020000414 -0500
+++ bar 2010-07-12 16:56:50.020000414 -0500
The whitespace-seeking heuristic works great, even when the tab
has been converted to spaces by some email + copy-and-paste
related corruption.
Except for one problem: if the filename itself contains whitespace,
the inferred filename will be too short.
When Giuseppe ran into this problem, it was for a file creation
patch (for debian/licenses/LICENSE.global BSD-style Chromium).
So one can't use the list of files present in the index to deduce an
appropriate filename (not to mention that way lies madness; see
v0.99~402, 2005-05-31).
Instead, look for a timestamp and use that if present to mark the end
of the filename. If no timestamp is present, the old heuristic is
used, with one exception: the space character \040 is not considered
terminating whitespace any more unless it is followed by a timestamp.
Reported-by: Giuseppe Iuculano <iuculano@debian.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new find_name_gnu() function handles new-style '--- "a/foo"'
patch header lines, leaving find_name() itself a bit less
daunting.
Functional change: do not clobber the p-value when there are not
enough path components in a quoted file name to honor it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix "Switched to a new branch <name>" to read "Switched to branch
<name>" when <name> corresponds to an existing branch. This bug was
introduced in 02ac983 while introducing the `-B` switch.
Cc: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.1.1~23^2 (merge: --log appends shortlog to message if
specified, 2010-05-11), the fmt-merge-msg backend supports custom text
to override the merge title "Merge <foo> into <bar>".
Expose this functionality for scripted callers. Example:
git fmt-merge-msg --log -m \
"$(printf '%s\n' \
"Merge branch 'api-cleanup' into feature" \
'' \
'This is to use a few functions refactored for this purpose.'
)" <.git/FETCH_HEAD
Cc: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --independent does not support more than MAX_REVS
revs, git internally supports more with a different algorithm.
Expose that functionality as "git merge-base --independent".
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --merge-base does not support more than MAX_REVS
revs, git supports more with a different algorithm
(v1.6.0-rc0~51^2~13, Introduce get_octopus_merge_bases() in commit.c,
2008-06-27). Expose that functionality.
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no branch 'foo' exists but a tag 'foo' does, then
git merge foo^ results in
Merge branch 'foo' (early part)
as a commit message, because the relevant code path checks that
refs/heads/foo is a valid refname for writing rather than for
reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/find-commit-subject:
blame: use find_commit_subject() instead of custom code
merge-recursive: use find_commit_subject() instead of custom code
bisect: use find_commit_subject() instead of custom code
revert: rename variables related to subject in get_message()
revert: refactor code to find commit subject in find_commit_subject()
revert: fix off by one read when searching the end of a commit subject
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
* tc/checkout-B:
builtin/checkout: handle -B from detached HEAD correctly
builtin/checkout: learn -B
builtin/checkout: reword hint for -b
add tests for checkout -b
As v1.6.1-rc1~294^2 (2008-08-23) explains, custom merge strategies
do not even kick in when the merge is truly trivial. But they
should, since otherwise a custom “--strategy=theirs” is not useful.
Perhaps custom strategies should not allow fast-forward either. This
patch does not make that change, since it is less important (because
it is always possible to explicitly use --no-ff).
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make repository-local configuration
available early (simplifying the startup sequence for
built-in commands).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make repository-local configuration
available early (simplifying the startup sequence for
built-in commands).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-remote already runs a repository search unconditionally to learn
about remote nicknames and "[url] insteadof" shortcuts. Run that
search a little sooner, and now one can try
[pager]
ls-remote
to automatically paginate ls-remote output, or use repository-local
[core]
pager = whatever
with "git --paginate ls-remote <url>".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack already runs a repository search unconditionally; running
such a search earlier is not risky and ensures GIT_DIR will be set
correctly if the configuration needs to be accessed from
run_builtin().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/maint-setup-fix' (early part):
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
For the pager choice (and the choice to paginate) to reflect the
current repository configuration, the repository needs to be
located first.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, “git -p bundle” does not always
respect the repository-local “[core] pager” setting.
It is hard to notice because subcommands other than
“git bundle unbundle” do not produce much output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.2~16^2 (2010-07-14) explains, without this change,
“git --paginate apply” can ignore the repository-local
“[core] pager” configuration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Prefix the advice
with “hint: ” to help.
Before:
error: could not apply 7ab78c9... foo
After resolving the conflicts,
mark the corrected paths with 'git add <paths>' or 'git rm <paths>'
and commit the result with:
git commit -c 7ab78c9a7898b87127365478431289cb98f8d98f
After:
error: could not apply 7ab78c9... foo
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit -c 7ab78c9'
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Clarify the error
and prefix it with “error: ” to help.
Before:
Automatic cherry-pick failed. [...advice...]
After:
error: could not apply 7ab78c9... Do something neat.
[...advice...]
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like error(), warn(), and die(), advise() prints a short message
with a formulaic prefix to stderr.
It is local to revert.c for now because I am not sure this is
the right API (we may want to take an array of advice lines or a
boolean argument for easy suppression of unwanted advice).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick was written (v0.99.6~63, 2005-08-27), “git commit”
was quiet, and the output from cherry-pick provided useful information
about the progress of a rebase.
Now next to the output from “git commit”, the cherry-pick notification
is so much noise (except for the name of the picked commit).
$ git cherry-pick ..topic
Finished cherry-pick of 499088b.
[detached HEAD 17e1ff2] Move glob module to libdpkg
Author: Guillem Jover <guillem@debian.org>
8 files changed, 12 insertions(+), 9 deletions(-)
rename {src => lib/dpkg}/glob.c (98%)
rename {src => lib/dpkg}/glob.h (93%)
Finished cherry-pick of ae947e1.
[detached HEAD 058caa3] libdpkg: Add missing symbols to Versions script
Author: Guillem Jover <guillem@debian.org>
1 files changed, 2 insertions(+), 0 deletions(-)
$
The noise is especially troublesome when sifting through the output of
a rebase or multiple cherry-pick that eventually failed.
With the commit subject, it is already not hard to figure out where
the commit came from. So drop the “Finished” message.
Cc: Christian Couder <chriscool@tuxfamily.org>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, if remote.<name>.tagopt was set, the --tags and option would
have no effect when given to git fetch. So if
tagopt="--no-tags"
git fetch --tags
would not actually fetch tags.
This patch changes this behavior to only follow what is written in the
config if there is no option passed by the command line.
Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
push: mention "git pull" in error message for non-fast forwards
Standardize do { ... } while (0) style
t/t7003: replace \t with literal tab in sed expression
index-pack: Don't follow replace refs.
The message remains fuzzy to include "git pull", "git pull --rebase" and
others, but directs the user to the simplest solution in the vast
majority of cases.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, attempting to index a pack containing objects that have been
replaced results in a fatal error that looks like:
fatal: SHA1 COLLISION FOUND WITH <replaced-object> !
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A porcelain message was first added in checkout.c in the commit
8ccba008 (Junio C Hamano, Sat May 17 21:03:49 2008, unpack-trees:
allow Porcelain to give different error messages) to give better feedback
in the case of merge errors.
This patch adapts the porcelain messages for the case of checkout
instead. This way, when having a checkout error, "merge" no longer
appears in the error message.
While we're there, we add an advice in the case of
would_lose_untracked_file.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of error messages was introduced as a structure, but an array
indexed over an enum is more flexible, since it allows one to store a
type of error message (index in the array) in a variable.
This change needs to rename would_lose_untracked ->
would_lose_untracked_file to avoid a clash with the function
would_lose_untracked in merge-recursive.c.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the caller to add its own error message to that returned
by split_cmdline. Thus error output following a failed split_cmdline
can be of the form
fatal: Bad alias.test string: cmdline ends with \
rather than
error: cmdline ends with \
fatal: Bad alias.test string
Signed-off-by: Greg Brockman <gdb@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git grep already runs a repository search unconditionally,
even when the --no-index option is supplied; running such a
search earlier is not very risky.
Just like with shortlog, without this change, the
“[pager] grep” configuration is not respected at all.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
shortlog already runs a repository search unconditionally;
running such a search earlier is not very risky.
Without this change, the “[pager] shortlog” configuration
is not respected at all: “git shortlog” unconditionally paginates.
The tests are a bit slow. Running the full battery like this
for all built-in commands would be counterproductive; the intent is
rather to test shortlog as a representative example command using
..._gently().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: clarify search results page when no matching commit found
Documentation: add a FILES section for show-ref
Makefile: add missing dependency on http.h
Makefile: add missing dependencies on url.h
Documentation/git-log: Clarify --full-diff
git-rebase: fix typo when parsing --force-rebase
imap-send: Fix sprintf usage
prune: allow --dry-run for -n and --verbose for -v
notes: allow --dry-run for -n and --verbose for -v
Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -C
Documentation: cite git-am from git-apply
t7003: fix subdirectory-filter test
Allow "check-ref-format --branch" from subdirectory
check-ref-format: handle subcommands in separate functions
pretty-options.txt: match --format's documentation with implementation.
For consistency with other git commands, let git prune accept the long
options --dry-run and --verbose for the respective short ones -n and -v.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency with other git commands, let the prune subcommand of
git notes accept the long options --dry-run and --verbose for the
respective short ones -n and -v.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ref-format --branch requires access to the repository
to resolve refs like @{-1}.
Noticed by Nguyễn Thái Ngọc Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for each subcommand should be easier to read and manipulate
this way.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git merge-recursive" a --renormalize option to enable the
merge.renormalize configuration. The --no-renormalize option can
be used to override it in the negative.
So in the future, you might be able to, e.g.:
git checkout -m -Xrenormalize otherbranch
or
git revert -Xrenormalize otherpatch
or
git pull --rebase -Xrenormalize
The bad part: merge.renormalize is still not honored for most
commands. And it reveals lots of places that -X has not been plumbed
in (so we get "git merge -Xrenormalize" but not much else).
NEEDSWORK: tests
Cc: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a “renormalize” bit to the ll-merge options word so callers can
decide on a case-by-case basis whether the merge is likely to have
overlapped with a change in smudge/clean rules.
This reveals a few commands that have not been taking that situation
into account, though it does not fix them.
No functional change intended.
Cc: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a shorthand similar to --system but instead uses
the config file of the current repository.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now setup_git_directory_gently behaves sanely even from subdirs of
.git, so simplify index-pack by no longer protecting against that.
This reverts commit a672ea6ac5
(excluding tests).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-ls-files a new option --debug that just tacks all available
data from the cache onto each file's line.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Creating a variable nr here to use throughout the function only to change
refspec_nr to nr at the end, having not used refspec_nr the entire time,
is rather pointless. Instead, simply increment refspec_nr.
While at it, use ALLOC_GROW() instead of xrealloc().
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since they do not precede setup_revisions, these assignments of 0 to
rev.abbrev have no effect.
v1.7.1.1~17^2~3 (2010-05-03) taught the log --format=%h machinery
to respect --abbrev instead of always abbreviating, so we have to pay
attention to the abbrev setting now.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From api-parse-options.txt:
`description` is a short string to describe the effect of the option.
It shall begin with a lower-case letter and a full stop (`.`) shall be
omitted at the end.
It also makes it less confusing if the argument is 'no.' or 'no'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message is especially confusing when "git fetch" is ran from "git
pull", for users not aware of "git fetch". The new message makes it clear
that "fetch" means "fetch new revisions", and gives hint on the solution.
We don't add a advice.* configuration option since this message doesn't
appear in normal use, and shouldn't disturb advanced users.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The NULL sentinel argument to the execl*() family of calls must be
cast to (char *), as otherwise:
- platforms where NULL is just 0 (not (void *)) would pass an int
- (admittedly esoteric) platforms where NULL is (void *)0 and (void *)
and (char *) have different memory layouts would pass the wrong kind
of pointer
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generic-looking pointer variable "p" was used only to point at subject
string and had a rather lifespan.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case is added but the problem can only be seen when running
the test case with --valgrind.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With v1.5.3.2~14 (apply --index-info: fall back to current index for
mode changes, 2007-09-17), git apply learned to stop worrying
about the lack of diff index line when a file already present in the
current index had no content change.
But it still worries too much: for rename patches, it is checking
that both the old and new filename are present in the current
index. This makes no sense, since a file rename generally
involves creating a file there was none before.
So just check the old filename.
Noticed while trying to use “git rebase” with diff.renames = copies.
[jn: add tests]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the -e/--exclude option for git-clean, a user can specify files
that they haven't yet told git about, but either need for a short amount
of time or plan to tell git about them later. This allows one to still
use git-clean while these files are around without losing data.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option adds symmetry with fast-import, enabling it to also work with
complete trees instead of just incremental changes. It works by issuing a
'deleteall' directive with each commit and then listing the full set of
files that make up that commit, rather than just showing the list of files
that have changed since the (first) parent commit. Note that this
functionality is automatically turned on when using --import-marks together
with path limiting in order to avoid dropping important but unchanged
files.
This functionality is desired when using hand-written filters along with
'fast-export | some-filter | fast-import' as it can be easier to write
<some-filter> in terms of complete trees than incremental changes.
We could avoid the need to add this option by simply always turning it on.
While the end result would be identical, it would slow things down slightly
by printing many more filenames per commit which goes somewhat against the
'fast' in 'fast-export'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since fast-export operates by listing file changes since the (first) parent
commit, when using --import-marks and path limiting and using a wider list
of paths than in previous runs, files from the new path(s) will silently be
omitted from the result unless or until a commit which explicitly changes
those files. The resulting repository in such cases is broken and makes no
sense.
This commit fixes this by having fast-export work with complete trees
instead of incremental changes (when both --import-marks and path limiting
are used). It works by issuing a 'deleteall' directive with each commit and
then listing the full set of files that make up that commit, rather than
just showing the list of files that have changed since the (first) parent
commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of saying "Finished one cherry-pick." or "Finished one revert.",
we now say "Finished cherry-pick of commit <abbreviated sha1>." or
"Finished revert of commit <abbreviated sha1>." which is more informative,
especially when cherry-picking or reverting many commits.
In case of failure the message is now "Automatic cherry-pick of commit
<abbreviated sha1> failed." instead of "Automatic cherry-pick failed."
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick foo" has always reported success with
"Finished one cherry-pick" but "cherry-pick --strategy"
does not print anything. So move the code to write that
message from do_recursive_merge() to do_cherry_pick()
so other strategies can share it.
This patch also refactors the code that prints a message
like "Automatic cherry-pick failed. <help message>". This
code was duplicated in both do_recursive_merge() and
do_pick_commit().
To do that, now do_recursive_merge() returns an int to signal
success or failure. And in case of failure we just return 1
from do_pick_commit() instead of doing "exit(1)" from either
do_recursive_merge() or do_pick_commit().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
0af0ac7 (Move MERGE_RR from .git/rr-cache/ into .git/) moved the
location of MERGE_RR but I found a few references to the old
location.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15b4f7a (merge-tree: use ll_merge() not xdl_merge(), 2010-01-16)
introduced a regression to merge-tree to cause it to segfault when merging
files which existed in one branch, but not in the other or in the
merge-base. This was caused by referencing entry->path at a time when
entry was known to be possibly-NULL.
To correct the problem, we save the path of the entry we came in with,
as the path should be the same among all the stages no matter which
sides are involved in the merge.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'rerere gc' prunes resolutions of conflicted merges that occurred long
time ago, and when doing so it takes the creation time of the
conflicted automerge results into account. This can cause the loss of
frequently used conflict resolutions (e.g. long-living topic branches
are merged into a regularly rebuilt integration branch (think of git's
pu)) when they become old enough to exceed 'rerere gc's threshold.
To prevent the loss of valuable merge resolutions 'rerere' will (1)
update the timestamp of the recorded conflict resolution (i.e.
'postimage') each time when encountering and resolving the same merge
conflict, and (2) take this timestamp, i.e. the time of the last usage
into account when gc'ing.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fast-import stream format requires incremental changes which take place
immediately, meaning that for D->F conversions all files below the relevant
directory must be deleted before the resulting file of the same name is
created. Reversing the order can result in fast-import silently deleting
the file right after creating it, resulting in the file missing from the
resulting repository.
We correct this by first sorting the diff_queue_struct in depth-first
order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ko/master: (2325 commits)
Git 1.7.2-rc2
backmerge a few more fixes to 1.7.1.X series
fix git branch -m in presence of cross devices
t/t0006: specify timezone as EST5 not EST to comply with POSIX
add missing && to submodule-merge testcase
t/README: document more test helpers
test-date: fix sscanf type conversion
xdiff: optimise for no whitespace difference when ignoring whitespace.
gitweb: Move evaluate_gitweb_config out of run_request
parse_date: fix signedness in timezone calculation
t0006: test timezone parsing
rerere.txt: Document forget subcommand
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
...
Conflicts:
builtin-read-tree.c
With a .gitconfig like this:
[color]
ui = auto
[color "grep"]
filename = magenta
if stdout is a terminal, the grep machinery will output the color
sequence \e[36m before each filename in its output.
In the case of "git grep -O foo", output is argv for the pager.
Disable color when calling the grep machinery in this case.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
backmerge a few more fixes to 1.7.1.X series
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
fix git branch -m in presence of cross devices
Conflicts:
RelNotes
builtin/rev-parse.c
* tr/receive-pack-aliased-update-fix:
check_aliased_update: strcpy() instead of strcat() to copy
receive-pack: detect aliased updates which can occur with symrefs
receive-pack: switch global variable 'commands' to a parameter
Conflicts:
t/t5516-fetch-push.sh
Some codepaths, such as "git status" and "git commit --dry-run",
tried to opportunisticly refresh the index and write the result
out. But they did so without checking if there was actually any
change that needs to be written out.
Noticed by Jeff King and Daniel at Rutgers.edu
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rule for selecting the candidates for conversion is: if the callback
function returns only 0 (the condition for for_each_string_list to exit
early), than it can be safely converted to the macro.
A notable exception are the callers in builtin/remote.c. If converted, the
readability in the file will suffer greately. Besides, the code is not very
performance critical (at the moment, at least): it does output formatting of
the list of remotes.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, merging across changes in line ending normalization is
painful since files containing CRLF will conflict with normalized files,
even if the only difference between the two versions is the line
endings. Additionally, any "real" merge conflicts that exist are
obscured because every line in the file has a conflict.
Assume you start out with a repo that has a lot of text files with CRLF
checked in (A):
o---C
/ \
A---B---D
B: Add "* text=auto" to .gitattributes and normalize all files to
LF-only
C: Modify some of the text files
D: Try to merge C
You will get a ridiculous number of LF/CRLF conflicts when trying to
merge C into D, since the repository contents for C are "wrong" wrt the
new .gitattributes file.
Fix ll-merge so that the "base", "theirs" and "ours" stages are passed
through convert_to_worktree() and convert_to_git() before a three-way
merge. This ensures that all three stages are normalized in the same
way, removing from consideration differences that are only due to
normalization.
This feature is optional for now since it changes a low-level mechanism
and is not necessary for the majority of users. The "merge.renormalize"
config variable enables it.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/decorate-color:
Add test for correct coloring of git log --decoration
Allow customizable commit decorations colors
log --decorate: Colorize commit decorations
log-tree.c: Use struct name_decoration's type for classifying decoration
commit.h: add 'type' to struct name_decoration
* cc/cherry-pick-stdin:
revert: do not rebuild argv on heap
revert: accept arbitrary rev-list options
t3508 (cherry-pick): futureproof against unmerged files
* jl/status-ignore-submodules:
Add the option "--ignore-submodules" to "git status"
git submodule: ignore dirty submodules for summary and status
Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Set options in struct rev_info directly so we can reuse the
arguments collected from parse_options without modification.
This is just a cleanup; no noticeable change is intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may segfault with too few parameters.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
An evil merge to adjust the series to cleaned-up API.
From: Julian Phillips <julian@quantumfyre.co.uk>
Subject: [PATCH v2 7/7] grep: fix string_list_append calls
Date: Sat, 26 Jun 2010 00:41:39 +0100
Message-ID: <20100625234140.18927.35025.julian@quantumfyre.co.uk>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_lookup to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of for_each_string_list to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
msvc: Fix some compiler warnings
Documentation: grep: fix asciidoc problem with --
msvc: Fix some "expr evaluates to function" compiler warnings
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internally, --track and --orphan still use the 'safe' -b, not -B.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shift the 'new' from the param to the hint, and expand the hint.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be useful to do something like:
git rev-list --reverse master -- README | git cherry-pick -n --stdin
without using xargs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the following warning is issued while compiling
notes.c:
notes.c(927) : warning C4550: expression evaluates to a \
function which is missing an argument list
along with identical warnings on lines 928, 1016 and 1017.
In order to suppress the warning, we change the definition of
combine_notes_fn, so that the symbol type is an (explicit)
"pointer to function ...". As a result, several other
declarations need some minor fix-up to take account of the
new typedef.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/cherry-pick-series:
Documentation/revert: describe passing more than one commit
Documentation/cherry-pick: describe passing more than one commit
revert: add tests to check cherry-picking many commits
revert: allow cherry-picking more than one commit
revert: change help_msg() to take no argument
revert: refactor code into a do_pick_commit() function
revert: use run_command_v_opt() instead of execv_git_cmd()
revert: cleanup code for -x option
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
* sm/branch-broken-ref:
branch: don't fail listing branches if one of the commits wasn't found
branch: exit status now reflects if branch listing finds an error
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Make the textconv_object function public, and add --textconv option to cat-file
to perform conversion on blob objects. Using --textconv implies that we are
working on a blob.
As files drivers need to be initialized, a new config is required in addition
to git_default_config. Therefore git_cat_file_config() is introduced
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
Conflicts:
builtin.h
This patches enables to perform textconv with blame if a textconv driver is
available fos the file.
The main task is performed by the textconv_object function which prepares
diff_filespec and if possible converts the file using diff textconv API.
Only regular files are converted, so the mode of diff_filespec is faked.
Textconv conversion is enabled by default (equivalent to the option
--textconv), since blaming binary files is useless in most cases.
The option --no-textconv is used to disable textconv conversion.
The declarations of several functions are modified to give access to a
diff_options, in order to know whether the textconv option is activated or not.
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
* sp/maint-describe-tiebreak-with-tagger-date:
describe: Break annotated tag ties by tagger date
tag.c: Parse tagger date (if present)
tag.c: Refactor parse_tag_buffer to be saner to program
tag.h: Remove unused signature field
tag.c: Correct indentation
* mh/status-optionally-refresh:
t7508: add a test for "git status" in a read-only repository
git status: refresh the index if possible
t7508: add test for "git status" refreshing the index
By default, git uses the version string as the signature for all
patches output by format-patch. Many employers (mine included)
require the use of a signature on all outgoing mails. In a
format-patch | send-email workflow there isn't an easy way to modify
the signature without breaking the pipe and manually replacing the
version string with the signature required. Instead of doing all that
work, add an option (--signature) and a config variable
(format.signature) to replace the default git version signature when
formatting patches.
This does modify the original behavior of format-patch a bit. First
off the version string is now placed in the cover letter by default.
Secondly, once the configuration variable format.signature is added
to the .config file there is no way to revert back to the default
git version signature. Instead, specifying the --no-signature option
will remove the signature from the patches entirely.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sun Studio 12 Update 1 thinks that *t could be uninitialized,
ostensibly because it doesn't take rewrite_cmd into account in its
static analysis.
builtin/notes.c: In function `notes_copy_from_stdin':
builtin/notes.c:419: warning: 't' might be used uninitialized in this function
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/grep-binary:
grep: support NUL chars in search strings for -F
grep: use REG_STARTEND for all matching if available
grep: continue case insensitive fixed string search after NUL chars
grep: use memmem() for fixed string search
grep: --name-only over binary
grep: --count over binary
grep: grep: refactor handling of binary mode options
grep: add test script for binary file handling
* js/try-to-free-stackable:
Do not call release_pack_memory in malloc wrappers when GIT_TRACE is used
Have set_try_to_free_routine return the previous routine
The environment variable GIT_REFLOG_ACTION was used by git-commit.sh,
but when it was converted to a builtin
(f5bbc3225c, Port git commit to C,
Nov 8 2007) this was lost.
Let's use it again as it is more user friendly when reverting or
cherry-picking to see "revert" or "cherry-pick" in the reflog rather
than to just see "commit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9c7304e (print the usage string on stdout instead of stderr,
2010-05-17) broke rev-parse --parseopt: when run with -h, the usage
notice on stdout ended up in the shell eval.
Wrap the usage in a cat <<\EOF ... EOF block when printing to stdout.
I do not expect any usage lines to ever start with EOF so this
shouldn't be an undue burden.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose you want to edit all files that contain a specific search term.
Of course, you can do something totally trivial such as
git grep -z -e <term> | xargs -0r vi +/<term>
but maybe you are happy that the same will be achieved by
git grep -Ovi <term>
now.
[jn: rebased and added tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option to open the matching files in the pager, and if the
pager happens to be "less" (or "vi") and there is only one grep pattern,
it also jumps to the first match right away.
The short option was chose as '-O' to avoid clashes with GNU grep's
options (as suggested by Junio).
So, 'git grep -O abc' is a short form for 'less +/abc $(grep -l abc)'
except that it works also with spaces in file names, and it does not
start the pager if there was no matching file.
[jn: rebased and added tests; with error handling fix from Junio
squashed in]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were three awfully similar code paths ending the threaded grep. It
is better to avoid duplicated code, though.
This change might very well prevent a race, where the grep patterns were
free()d before waiting that all threads finished.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify cmd_grep by splitting off the loop that finds matches in a
list of trees. So now the main part of cmd_grep looks like:
if (!use_index) {
int hit = grep_directory(&opt, paths);
if (use_threads)
hit |= wait_all();
return !hit;
}
if (!list.nr) {
if (!cached)
setup_work_tree();
int hit = grep_cache(&opt, paths, cached);
if (use_threads)
hit |= wait_all;
return !hit;
}
hit = grep_objects(&opt, path, &list);
if (use_threads)
hit |= wait_all();
return !hit;
and is ripe for further refactoring.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --count option that, instead of actually listing the commits,
merely counts them.
This is mostly geared towards script use, and to this end it acts
specially when used with --left-right: it outputs the left and right
counts separately. Previously, scripts would have to run a shell loop
or small inline script over to achieve the same. (Without
--left-right, a simple |wc -l does the job.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
859c301 (refs: split log_ref_write logic into log_ref_setup,
2010-05-21) refactors the stack allocation of the log_file array into
the new log_ref_setup() function, but passes it back to the caller.
Since the original intent seems to have been to split the work between
log_ref_setup and log_ref_write, make it the caller's responsibility
to allocate the buffer.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally disallow empty commits with "git commit". The
output produced by the wt_status functions is generally
sufficient to explain what happened.
With --amend commits, however, things are a little more
confusing. We would create an empty commit not if you
actually have staged changes _now_, but if your staged
changes match HEAD^. In this case, it is not immediately
obvious why "git commit" claims no changes, but "git status"
does not. Furthermore, we should point the user in the
direction of git reset, which would eliminate the empty
commit entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When listing branches with ref lookups, if one of the known raw refs
doesn't point to a commit then "git branch" would return error(),
terminating the whole for_each_rawref() iteration and possibly hiding
any remaining refs.
Signed-off-by: Simo Melenius <simo.melenius@iki.fi>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If some refs could not be read when listing branches, this can now be
observed in the exit status of the "git branch" command.
Signed-off-by: Simo Melenius <simo.melenius@iki.fi>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git ls-files used to error out if given paths which point outside the current
working directory, such as '../'. We now allow such paths and the output is
analogous to git grep -l.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a first line in the output of `git status -s` when given
the option `-b` or `--branch`, showing which branch the user is
currently on, and in case of tracking branches the number of commits on
each branch.
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added changes to satisfy a corner case: creating reflogs by using -l
when core.logAllRefUpdates is set to false.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it possible to pass many commits or ranges of
commits to "git cherry-pick" and to "git revert" to process
many commits instead of just one.
In fact commits are now enumerated with an equivalent of
git rev-list --no-walk "$@"
so all the following are now possible:
git cherry-pick master~2..master
git cherry-pick ^master~2 master
git cherry-pick master^ master
The following should be possible but does not work:
git cherry-pick -2 master
because "git rev-list --no-walk -2 master" only outputs
one commit as "--no-walk" seems to take over "-2".
And there is currently no way to continue cherry-picking or
reverting if there is a problem with one commit. It's also
not possible to abort the whole process. Some future work
should provide the --continue and --abort options to do
just that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed because the following commits will make it
possible to cherry-pick many commits instead of just one.
So it will be possible to pass for example ranges of commits
to "git cherry-pick" and this means that it will not be
possible to use the arguments passed to "git cherry-pick" in
the help message.
The help message will have to use the sha1 of the currently
processed commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed because we are going to make it possible
to cherry-pick many commits instead of just one in the following
commits. And we will be able to do that by just calling
do_pick_commit() once for each commit to cherry-pick.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed by the following commits, because we are going
to cherry pick many commits instead of just one.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was some dead code and option -x appeared in the short
help message of git revert (when running "git revert -h")
which was wrong.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/SubmittingPatches: clarify GMail section and SMTP
show-branch: use DEFAULT_ABBREV instead of 7
t7502-commit: fix spelling
test get_git_work_tree() return value for NULL
Search patterns in a file specified with -f can contain NUL characters.
The current code ignores all characters on a line after a NUL.
Pass the actual length of the line all the way from the pattern file to
fixmatch() and use it for case-sensitive fixed string matching.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
* js/maint-receive-pack-symref-alias:
t5516-fetch-push.sh: style cleanup
receive-pack: detect aliased updates which can occur with symrefs
receive-pack: switch global variable 'commands' to a parameter
Conflicts:
t/t5516-fetch-push.sh
* jc/maint-no-reflog-expire-unreach-for-head:
reflog --expire-unreachable: special case entries in "HEAD" reflog
more war on "sleep" in tests
Document gc.<pattern>.reflogexpire variables
Conflicts:
Documentation/config.txt
* sp/maint-describe-tiebreak-with-tagger-date:
describe: Break annotated tag ties by tagger date
tag.c: Parse tagger date (if present)
tag.c: Refactor parse_tag_buffer to be saner to program
tag.h: Remove unused signature field
tag.c: Correct indentation
* sr/remote-helper-export:
t5800: testgit helper requires Python support
Makefile: Simplify handling of python scripts
remote-helpers: add tests for testgit helper
remote-helpers: add testgit helper
remote-helpers: add support for an export command
remote-helpers: allow requesing the path to the .git directory
fast-import: always create marks_file directories
clone: also configure url for bare clones
clone: pass the remote name to remote_get
Conflicts:
Makefile
* ar/config-from-command-line:
Complete prototype of git_config_from_parameters()
Use strbufs instead of open-coded string manipulation
Allow passing of configuration parameters in the command line
Introduce -n and -v options for "git notes prune" in complete analogy to
"git prune" so that one can check for dangling notes easily.
The output is a list of names of objects whose notes would be resp.
are removed so that one can check the object ("git show sha1") as well as
the note ("git notes show sha1").
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add ‘git remote set-branches’ for changing the list of tracked refs
for a remote repository with one "porcelain-level" command. This
complements the longstanding ‘git remote add --track’ option.
The interface is based on the ‘git remote set-url’ subcommand.
git remote set-branches base --add C
git remote set-branches base A B D
git remote set-branches base --delete D; # not implemented
Suggested-by: martin f. krafft <madduck@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a :short modifier to objectname which outputs the abbreviated
object name.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 9c00de5 (ls-remote: fall-back to default remotes when no remote
specified), when no repository is specified, ls-remote may use
the URL/remote in the config "branch.<name>.remote" or the remote
"origin"; it may not be immediately obvious to the user which was used.
In such cases, print a simple "From <URL>" line to indicate which
repository was used. This message is similar to git-fetch's, and is
printed to stderr to avoid breaking existing scripts that depend on
ls-remote's output behaviour.
It can also be disabled with -q/--quiet.
Modify tests related to falling back on default remotes to check for
this as well, and add a test to check for suppression of the message.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user specifies a message, use fmt_merge_msg_shortlog() to
append the shortlog.
Previously, when a message was specified, we ignored the merge title
("Merge <foo> into <bar>") and shortlog from fmt_merge_msg().
Update the documentation for -m to reflect this too.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shift implementation into a private function, do_fmt_merge_msg(). This
allows for further changes to the implementation, without affecting the
interface.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is more accurate to call it 'merge_names' instead of 'msg', as it
does not contain the final message.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ce9d823 (merge: do not add standard message when message is given with
-m option) changed the behaviour of the code that the comment addressed,
but the comment was not similarly updated.
Fix this.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we know we are creating a bare repository, we use setenv
to set the GIT_DIR directory to the current directory
(either where we already were, or one we created and chdir'd
into with "git init --bare <dir>").
However, with "git --bare init <dir>" (note the --bare as a
git wrapper option), the setup code actually sets GIT_DIR
for us, but it uses the wrong, original cwd when a directory
is given. Because our setenv does not use the overwrite
flag, it is ignored.
We need to set the overwrite flag, but only when we are
given a directory on the command line. That still allows:
GIT_DIR=foo.git git init --bare
to work. The behavior is changed for:
GIT_DIR=foo.git git init --bare bar.git
which used to create the repository in foo.git, but now will
use bar.git. This is more sane, as command line options
should generally override the environment.
Noticed by Oliver Hoffmann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning into a non-bare repository, e.g. "git clone $URL mine",
we used to report that we are cloning into "mine/.git". Reword the
report to say "Cloning into mine" instead, as that matches what the
end-user asked for closer.
Make the message for "git clone --bare $URL mine" to say "Cloning
into bare repository mine" do make the distinction between this case and
the above stand out a bit more prominently.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/status-optionally-refresh:
t7508: add a test for "git status" in a read-only repository
git status: refresh the index if possible
t7508: add test for "git status" refreshing the index
* cw/ws-indent-with-tab:
whitespace: tests for git-apply --whitespace=fix with tab-in-indent
whitespace: add tab-in-indent support for --whitespace=fix
whitespace: replumb ws_fix_copy to take a strbuf *dst instead of char *dst
whitespace: tests for git-diff --check with tab-in-indent error class
whitespace: add tab-in-indent error class
whitespace: we cannot "catch all errors known to git" anymore
* cc/revert-strategy:
revert: add "--strategy" option to choose merge strategy
merge: make function try_merge_command non static
merge: refactor code that calls "git merge-STRATEGY"
revert: refactor merge recursive code into its own function
revert: use strbuf to refactor the code that writes the merge message
Conflicts:
builtin/revert.c
* jk/cached-textconv:
diff: avoid useless filespec population
diff: cache textconv output
textconv: refactor calls to run_textconv
introduce notes-cache interface
make commit_tree a library function
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
When cherry-picking, usually the new and old commit encodings are both
UTF-8. Most old iconv implementations do not support this trivial
conversion, so on old platforms, out->message remains NULL, and later
attempts to read it segfault.
Fix this by noticing the input and output encodings match and skipping
the iconv step, like the other reencode_string() call sites already do.
Also stop segfaulting on other iconv failures: if iconv fails for some
other reason, the best we can do is to pass the old message through.
This fixes a regression introduced in v1.7.1-rc0~15^2~2 (revert:
clarify label on conflict hunks, 2010-03-20).
Reported-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Though I have not seen this in the wild, it has been said that there
are likely to be git repositories converted from other version control
systems with an invalid ident line like this one:
author <user@example.com> 18746342 +0000
Because there is no space between the (empty) user name and the email
address, commit --amend chokes. When searching for a
space-left-bracket sequence on the ident line, it finds it in the
committer line, ending up utterly confused.
Better for commit --amend to treat this like a valid ident line with
empty username and complain.
The tests remove the questionable commit objects after use so there is
no chance for them to confuse later tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a local git clone reports only initializing an empty
git dir, which is potentially confusing.
Instead, report that cloning is in progress and when it is done
(unless -q) is given, and suppress the init report.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add '--[no-]tags' options to 'git remote add' which add the
'remote.REMOTE.tagopt = --[no-]tags' to the configuration file.
This mimics the "--tags" and "--no-tags" options of "git fetch".
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have an alias that takes two arguments and compares their patch IDs.
I would like to use to make sure I've tested exactly what I submit
(patch by patch), like
git patch-cmp origin/master.. file-being-sent
However, I cannot do that because git patch-id is fooled by the "-- "
trailer that git format-patch puts, or likely by the MIME boundary.
This patch adds hunk parsing logic to git patch-id in order to detect an
out of place "-" line and split the patch when it comes. In addition,
commit ids in the "From " lines are considered and printed in the output.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies a bit the next patch, since it will have more than one
condition to exit the loop.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the preferred way to run a git command.
The only obvious observable effects I can think of are that the exec
is properly reported in GIT_TRACE output and that verifying signed
tags will still work if the git-verify-tag hard link in gitexecdir
goes missing.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git log --pretty='%N' without an explicit --show-notes, git
would segfault. This patches fixes this behaviour by loading the needed
notes datastructures if --pretty is used and the format contains %N.
When --pretty='%N' is used together with --no-notes, %N won't be
expanded.
This is an extension to a proposed patch by Jeff King.
Signed-off-by: Johannes Gilger <heipei@hackvalue.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of breaking execution when no remote (as specified in the
variable dest) is specified when git-ls-remote is invoked, continue on
and let remote_get() handle it.
This way, we are able to use the default remotes (eg. "origin",
branch.<name>.remote), as git-fetch, git-push, and other users of
remote_get(), do.
If no suitable remote is found, exit with a message describing the
issue, instead of just the usage text, as we do previously.
Add several tests to check that git-ls-remote handles the
no-remote-specified situation.
Also add a test that "git ls-remote <pattern>" does not work; we are
unable to guess the remote in that situation, as are git-fetch and
git-push.
In that test, we are testing for messages coming from two separate
processes, but we should be OK, because the second message is triggered
by closing the fd which must happen after the first message is printed.
(analysis by Jeff King.)
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change git-commit(1) to accept the --allow-empty-message option
to allow a commit with an empty message. This is analogous to the
existing --allow-empty option which allows a commit that records
no changes. As these are mainly for interoperating with foreign SCM
systems, and are not meant for normal use, ensure that "git commit -h"
does not talk about them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/fmt-merge-msg:
fmt-merge-msg: hide summary option
fmt-merge-msg: remove custom string_list implementation
string-list: add unsorted_string_list_lookup()
fmt-merge-msg: use pretty.c routines
t6200: test fmt-merge-msg more
t6200: modernize with test_tick
fmt-merge-msg: be quiet if nothing to merge
To implement --whitespace=fix for tab-in-indent, we have to allow for the
possibility that whitespace can increase in size when it is fixed, expanding
tabs to to multiple spaces in the initial indent.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle perforations found “in the wild” more robustly by recognizing
“%<” as an alternative scissors mark.
This feature is only meant to support old habits. Discourage new use
of the percent-based version by only documenting the 8< symbol so new
users’ perforations can still be recognized by old versions of Git.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/merge-diff3-label:
merge-recursive: add a label for ancestor
cherry-pick, revert: add a label for ancestor
revert: clarify label on conflict hunks
compat: add mempcpy()
checkout -m --conflict=diff3: add a label for ancestor
merge_trees(): add ancestor label parameter for diff3-style output
merge_file(): add comment explaining behavior wrt conflict style
checkout --conflict=diff3: add a label for ancestor
ll_merge(): add ancestor label parameter for diff3-style output
merge-file --diff3: add a label for ancestor
xdl_merge(): move file1 and file2 labels to xmparam structure
xdl_merge(): add optional ancestor label to diff3-style output
tests: document cherry-pick behavior in face of conflicts
tests: document format of conflicts from checkout -m
Conflicts:
builtin/revert.c
This was already the case before commit 9e4b7ab6 (git status: not
"commit --dry-run" anymore, 2009-08-15) with the difference that it died
at failure.
It got lost during the new implementation of "git status", which was
meant to only change behaviour when invoked with arguments.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file descriptor is already defined at the beginning of the function.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, this has been part of the commit-tree builtin.
However, it is already used by other builtins (like commit,
merge, and notes), and it would be useful to access it from
library code.
The check_valid helper has to come along, too, but is given
a more library-ish name of "assert_sha1_type".
Otherwise, the code is unchanged. There are still a few
rough edges for a library function, like printing the utf8
warning to stderr, but we can address those if and when they
come up as inappropriate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes it possible to use a different merge strategy when
cherry-picking. This is usefull mainly for debugging purposes as it
allows to see if some failures are caused by the merge strategy used or
not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the try_merge_strategy() function, when the strategy is "recursive"
or "subtree", the merge_recursive() function is called.
Otherwise we launch a "git merge-STRATEGY" process.
To make it possible to reuse code that launches a "git merge-STRATEGY"
process, this patch refactors this code into a new try_merge_command()
function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that is used to do a recursive merge is extracted from
the revert_or_cherry_pick() function and put into a new
do_recursive_merge() function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code in this commit was written by Stephan Beyer for the sequencer
GSoC project:
git://repo.or.cz/git/sbeyer.git
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this the 'origin' remote would not be configured, so when
calling remote_get with 'origin' as argument we would get an
unconfigured remote.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when using a remote helper to clone a repository, the
remote helper will be passed the url of the target repository as
first argument (which represents the name of the remote). This name
is extracted from transport->remote->name, which is set by
builtin/clone.c when it calls remote_get with argv[0] as argument.
Fix this by passing the name remote will be set up as instead.
However, setup_reference calls remote_get before the remote is
added to the config file. This will result in an improperly
configured remote (in memory) if later on remote_get is called
with an argument that is not equal to the initial remote_get call
in setup_reference. Fix this by delaying the remote_get call until
after the remote has been added to the config file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/cherry-pick-ff:
revert: fix tiny memory leak in cherry-pick --ff
rebase -i: use new --ff cherry-pick option
Documentation: describe new cherry-pick --ff option
cherry-pick: add tests for new --ff option
revert: add --ff option to allow fast forward when cherry-picking
builtin/merge: make checkout_fast_forward() non static
parse-options: add parse_options_concat() to concat options
* maint:
t9350: fix careless use of "cd"
difftool: Fix '--gui' when diff.guitool is unconfigured
fast-export: don't segfault when marks file cannot be opened
This patch introduces the remove_or_warn function which is a
generalised version of the {unlink,rmdir}_or_warn functions. It takes
an additional parameter indicating the mode of the file to be removed.
The patch also modifies certain functions to use remove_or_warn
where appropriate, and adds a test case for a bug fixed by the use
of remove_or_warn.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values passed this way will override whatever is defined
in the config files.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --summary command line option has been deprecated in favor of --log.
Hide the option from the help message to further discourage the use of
this option.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command uses a custom version of string list when it could
just as easily use the string_list API. Convert it to use string_list
and reduce the code size a bit.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command duplicates functionality of the '%s' pretty format.
Simplify the code a bit by using the pretty printing routine
instead of open-coding it here.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When FETCH_HEAD contains only 'not-for-merge' entries fmt-merge-msg
still outputs "Merge" (and if the branch isn't master " into <branch>").
In this case fmt-merge-msg is outputting junk and should really just
be quiet. Fix it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
* pb/log-first-parent-p-m:
show --first-parent/-m: do not default to --cc
show -c: show patch text
revision: introduce setup_revision_opt
t4013: add tests for log -p -m --first-parent
git log -p -m: document -m and honor --first-parent
Similar to -b, --orphan creates a new branch, but it starts without any
commit. After running "git checkout --orphan newbranch", you are on a
new branch "newbranch", and the first commit you create from this state
will start a new history without any ancestry.
"git checkout --orphan" keeps the index and the working tree files
intact in order to make it convenient for creating a new history whose
trees resemble the ones from the original branch.
When creating a branch whose trees have no resemblance to the ones from
the original branch, it may be easier to start work on the new branch by
untracking and removing all working tree files that came from the
original branch, by running a 'git rm -rf .' immediately after running
"checkout --orphan".
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_unique_abbrev() already returns the full SHA-1 if abbrev = 0,
so we can remove the logic that avoids the call.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing conflict hunks in ‘diff3 -m’ format, also add a label to
the common ancestor. Especially in a cherry-pick, it is not immediately
obvious without such a label what the common ancestor represents.
git rerere does not have trouble parsing the new output and its preimage
ids are unchanged since it includes its own code for recreating conflict
hunks. No other code in git parses conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reverting a commit, the commit being merged is not the commit
to revert itself but its parent. Add “parent of” to the conflict
hunk label to make this more clear.
The conflict hunk labels are all pieces of a single string written in
the new get_message() function. Avoid some complication by using
mempcpy to advance a pointer as the result is written.
Also free the corresponding temporary buffer (it was leaked before).
This is not important because it is a small one-time allocation. It
would become a memory leak if unnoticed when libifying revert.
This patch uses calls to strlen() instead of integer constants in some
places. GCC will compute the length at compile time; I am not sure
about other compilers, but this is not performance-critical anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout --merge --conflict=diff3 can be used to present conflict
hunks including text from the common ancestor. The added information
is helpful for resolving a merge by hand, and merge tools tend to
understand it because it is very similar to what ‘diff3 -m’ produces.
Unlike current git, diff3 -m includes a label for the merge base on
the ||||||| line, and unfortunately, some tools cannot parse the
conflict hunks without it. Humans can benefit from a cue when
learning to interpreting the format, too. Mark the start of the text
from the old branch with a label based on the branch’s name.
git rerere does not have trouble parsing this output and its preimage
ids are unchanged since it includes its own code for recreating
conflict hunks. No other code in git tries to parse conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout --conflict=diff3 can be used to present conflicts hunks
including text from the common ancestor:
<<<<<<< ours
ourside
|||||||
original
=======
theirside
>>>>>>> theirs
The added information is helpful for resolving a merge by hand, and
merge tools can usually understand it without trouble because it looks
like output from ‘diff3 -m’.
diff3 includes a label for the merge base on the ||||||| line, and it
seems some tools (for example, Emacs 22’s smerge-mode) cannot parse
conflict hunks without such a label. Humans could use help in
interpreting the output, too. So change the marker for the start of the
text from the common ancestor to include the label “base”.
git rerere’s conflict identifiers are not affected: to parse conflict
hunks, rerere looks for whitespace after the ||||||| marker rather
than a newline, and to compute preimage ids, rerere has its own code
for creating conflict hunks. No other code in git tries to parse
conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
