realpath is only populated if we execute the git_work_tree_initialized
block. However that block also causes us to return early, meaning we
never actually release the strbuf in the case where we populated it.
Therefore we move all strbuf related code into the block to guarantee
that we can't leak it.
LSAN output from t0095:
Direct leak of 129 byte(s) in 1 object(s) allocated from:
#0 0x49a9b9 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x78f585 in xrealloc wrapper.c:126:8
#2 0x713ff4 in strbuf_grow strbuf.c:98:2
#3 0x713ff4 in strbuf_getcwd strbuf.c:597:3
#4 0x4f0c18 in strbuf_realpath_1 abspath.c:99:7
#5 0x5ae4a4 in set_git_work_tree environment.c:259:3
#6 0x6fdd8a in setup_discovered_git_dir setup.c:931:2
#7 0x6fdd8a in setup_git_directory_gently setup.c:1235:12
#8 0x4cb50d in get_bloom_filter_for_commit t/helper/test-bloom.c:41:2
#9 0x4cb50d in cmd__bloom t/helper/test-bloom.c:95:3
#10 0x4caa1f in cmd_main t/helper/test-tool.c:124:11
#11 0x4caded in main common-main.c:52:11
#12 0x7f0869f02349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 129 byte(s) leaked in 1 allocation(s).
It looks like this leak has existed since realpath was first added to
set_git_work_tree() in:
3d7747e318 (real_path: remove unsafe API, 2020-03-10)
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we currently have the `GIT_CONFIG_PARAMETERS` environment variable
which can be used to pass runtime configuration data to git processes,
it's an internal implementation detail and not supposed to be used by
end users.
Next to being for internal use only, this way of passing config entries
has a major downside: the config keys need to be parsed as they contain
both key and value in a single variable. As such, it is left to the user
to escape any potentially harmful characters in the value, which is
quite hard to do if values are controlled by a third party.
This commit thus adds a new way of adding config entries via the
environment which gets rid of this shortcoming. If the user passes the
`GIT_CONFIG_COUNT=$n` environment variable, Git will parse environment
variable pairs `GIT_CONFIG_KEY_$i` and `GIT_CONFIG_VALUE_$i` for each
`i` in `[0,n)`.
While the same can be achieved with `git -c <name>=<value>`, one may
wish to not do so for potentially sensitive information. E.g. if one
wants to set `http.extraHeader` to contain an authentication token,
doing so via `-c` would trivially leak those credentials via e.g. ps(1),
which typically also shows command arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `getenv_safe()` helper function helps to safely retrieve multiple
environment values without the need to depend on platform-specific
behaviour for the return value's lifetime. We'll make use of this
function in a following patch, so let's make it available by making it
non-static and adding a declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
As evidenced by the leak fixes in the previous commit, the "const" in
git_config_get_string_const() clearly misleads people into thinking that
it does not allocate a copy of the string. We can fix this by renaming
it, but it's easier still to just drop it. Of the four remaining
callers:
- The one in git_config_parse_expiry() still needs to allocate, since
that's what its callers expect. We can just use the non-const
version and cast our pointer. Slightly ugly, but the damage is
contained in one spot.
- The two in apply are writing to global "const char *" variables, and
need to continue allocating. We often mark these as const because we
assign default string literals to them. But in this case we don't do
that, so we can just declare them as real "char *" pointers and use
the non-const version.
- The call in checkout doesn't actually need a copy; it can just use
the non-allocating "tmp" version of the function.
The function is also mentioned in the MyFirstContribution document. We
can swap that call out for the non-allocating "tmp" variant, which fits
well in the example given.
We'll drop the "configset" and "repo" variants, as well (which are
unused).
Note that this frees up the "const" name, so we could rename the "tmp"
variant back to that. But let's give some time for topics in flight to
adapt to the new code before doing so (if we do it too soon, the
function semantics will change but the compiler won't alert us).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`real_path()` returns result from a shared buffer, inviting subtle
reentrance bugs. One of these bugs occur when invoked this way:
set_git_dir(real_path(git_dir))
In this case, `real_path()` has reentrance:
real_path
read_gitfile_gently
repo_set_gitdir
setup_git_env
set_git_dir_1
set_git_dir
Later, `set_git_dir()` uses its now-dead parameter:
!is_absolute_path(path)
Fix this by using a dedicated `strbuf` to hold `strbuf_realpath()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
Back in the DOS days, in the FAT file system, file names always
consisted of a base name of length 8 plus a file extension of length 3.
Shorter file names were simply padded with spaces to the full 8.3
format.
Later, the FAT file system was taught to support _also_ longer names,
with an 8.3 "short name" as primary file name. While at it, the same
facility allowed formerly illegal file names, such as `.git` (empty base
names were not allowed), which would have the "short name" `git~1`
associated with it.
For backwards-compatibility, NTFS supports alternative 8.3 short
filenames, too, even if starting with Windows Vista, they are only
generated on the system drive by default.
We addressed the problem that the `.git/` directory can _also_ be
accessed via `git~1/` (when short names are enabled) in 2b4c6efc82
(read-cache: optionally disallow NTFS .git variants, 2014-12-16), i.e.
since Git v1.9.5, by introducing the config setting `core.protectNTFS`
and enabling it by default on Windows.
In the meantime, Windows 10 introduced the "Windows Subsystem for Linux"
(short: WSL), i.e. a way to run Linux applications/distributions in a
thinly-isolated subsystem on Windows (giving rise to many a "2016 is the
Year of Linux on the Desktop" jokes). WSL is getting increasingly
popular, also due to the painless way Linux application can operate
directly ("natively") on files on Windows' file system: the Windows
drives are mounted automatically (e.g. `C:` as `/mnt/c/`).
Taken together, this means that we now have to enable the safe-guards of
Git v1.9.5 also in WSL: it is possible to access a `.git` directory
inside `/mnt/c/` via the 8.3 name `git~1` (unless short name generation
was disabled manually). Since regular Linux distributions run in WSL,
this means we have to enable `core.protectNTFS` at least on Linux, too.
To enable Services for Macintosh in Windows NT to store so-called
resource forks, NTFS introduced "Alternate Data Streams". Essentially,
these constitute additional metadata that are connected to (and copied
with) their associated files, and they are accessed via pseudo file
names of the form `filename:<stream-name>:<stream-type>`.
In a recent patch, we extended `core.protectNTFS` to also protect
against accesses via NTFS Alternate Data Streams, e.g. to prevent
contents of the `.git/` directory to be "tracked" via yet another
alternative file name.
While it is not possible (at least by default) to access files via NTFS
Alternate Data Streams from within WSL, the defaults on macOS when
mounting network shares via SMB _do_ allow accessing files and
directories in that way. Therefore, we need to enable `core.protectNTFS`
on macOS by default, too, and really, on any Operating System that can
mount network shares via SMB/CIFS.
A couple of approaches were considered for fixing this:
1. We could perform a dynamic NTFS check similar to the `core.symlinks`
check in `init`/`clone`: instead of trying to create a symbolic link
in the `.git/` directory, we could create a test file and try to
access `.git/config` via 8.3 name and/or Alternate Data Stream.
2. We could simply "flip the switch" on `core.protectNTFS`, to make it
"on by default".
The obvious downside of 1. is that it won't protect worktrees that were
clone with a vulnerable Git version already. We considered patching code
paths that check out files to check whether we're running on an NTFS
system dynamically and persist the result in the repository-local config
setting `core.protectNTFS`, but in the end decided that this solution
would be too fragile, and too involved.
The obvious downside of 2. is that everybody will have to "suffer" the
performance penalty incurred from calling `is_ntfs_dotgit()` on every
path, even in setups where.
After the recent work to accelerate `is_ntfs_dotgit()` in most cases,
it looks as if the time spent on validating ten million random
file names increases only negligibly (less than 20ms, well within the
standard deviation of ~50ms). Therefore the benefits outweigh the cost.
Another downside of this is that paths that might have been acceptable
previously now will be forbidden. Realistically, though, this is an
improvement because public Git hosters already would reject any `git
push` that contains such file names.
Note: There might be a similar problem mounting HFS+ on Linux. However,
this scenario has been considered unlikely and in light of the cost (in
the aforementioned benchmark, `core.protectHFS = true` increased the
time from ~440ms to ~610ms), it was decided _not_ to touch the default
of `core.protectHFS`.
This change addresses CVE-2019-1353.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Helped-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can have a different default partial clone filter for
each promisor remote, let's hide core_partial_clone_filter_default
as a static in promisor-remote.c to avoid it being use for
anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were many places the code relied on the string returned from
getenv() to be non-volatile, which is not true, that have been
corrected.
* jk/save-getenv-result:
builtin_diff(): read $GIT_DIFF_OPTS closer to use
merge-recursive: copy $GITHEAD strings
init: make a copy of $GIT_DIR string
config: make a copy of $GIT_CONFIG string
commit: copy saved getenv() result
get_super_prefix(): copy getenv() result
The return value of getenv() is not guaranteed to remain valid across
multiple calls (nor across calls to setenv()). Since this function
caches the result for the length of the program, we must make a copy to
ensure that it is still valid when we need it.
Reported-by: Yngve N. Pettersen <yngve@vivaldi.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
Our handling of alternate object directories is needlessly different
from the main object directory. As a result, many places in the code
basically look like this:
do_something(r->objects->objdir);
for (odb = r->objects->alt_odb_list; odb; odb = odb->next)
do_something(odb->path);
That gets annoying when do_something() is non-trivial, and we've
resorted to gross hacks like creating fake alternates (see
find_short_object_filename()).
Instead, let's give each raw_object_store a unified list of
object_directory structs. The first will be the main store, and
everything after is an alternate. Very few callers even care about the
distinction, and can just loop over the whole list (and those who care
can just treat the first element differently).
A few observations:
- we don't need r->objects->objectdir anymore, and can just
mechanically convert that to r->objects->odb->path
- object_directory's path field needs to become a real pointer rather
than a FLEX_ARRAY, in order to fill it with expand_base_dir()
- we'll call prepare_alt_odb() earlier in many functions (i.e.,
outside of the loop). This may result in us calling it even when our
function would be satisfied looking only at the main odb.
But this doesn't matter in practice. It's not a very expensive
operation in the first place, and in the majority of cases it will
be a noop. We call it already (and cache its results) in
prepare_packed_git(), and we'll generally check packs before loose
objects. So essentially every program is going to call it
immediately once per program.
Arguably we should just prepare_alt_odb() immediately upon setting
up the repository's object directory, which would save us sprinkling
calls throughout the code base (and forgetting to do so has been a
source of subtle bugs in the past). But I've stopped short of that
here, since there are already a lot of other moving parts in this
patch.
- Most call sites just get shorter. The check_and_freshen() functions
are an exception, because they have entry points to handle local and
nonlocal directories separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
'branch_track' feels more closely related to branching, and it is
needed later in branch.h; rather than #include'ing cache.h in branch.h
for this small enum, just move the enum and the external declaration
for git_branch_track to branch.h.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This conversion was done without the #define trick used in the earlier
series refactoring to have better repository access, because this function
is easy to review, as all lines are converted and it has only one caller.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of set_alternate_shallow_file
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "checkout-encoding" attribute can ask Git to convert the
contents to the specified encoding when checking out to the working
tree (and the other way around when checking in).
* ls/checkout-encoding:
convert: add round trip check based on 'core.checkRoundtripEncoding'
convert: add tracing for 'working-tree-encoding' attribute
convert: check for detectable errors in UTF encodings
convert: add 'working-tree-encoding' attribute
utf8: add function to detect a missing UTF-16/32 BOM
utf8: add function to detect prohibited UTF-16/32 BOM
utf8: teach same_encoding() alternative UTF encoding names
strbuf: add a case insensitive starts_with()
strbuf: add xstrdup_toupper()
strbuf: remove unnecessary NUL assignment in xstrdup_tolower()
The effort to pass the repository in-core structure throughout the
API continues. This round deals with the code that implements the
refs/replace/ mechanism.
* sb/object-store-replace:
replace-object: allow lookup_replace_object to handle arbitrary repositories
replace-object: allow do_lookup_replace_object to handle arbitrary repositories
replace-object: allow prepare_replace_object to handle arbitrary repositories
refs: allow for_each_replace_ref to handle arbitrary repositories
refs: store the main ref store inside the repository struct
replace-object: add repository argument to lookup_replace_object
replace-object: add repository argument to do_lookup_replace_object
replace-object: add repository argument to prepare_replace_object
refs: add repository argument to for_each_replace_ref
refs: add repository argument to get_main_ref_store
replace-object: check_replace_refs is safe in multi repo environment
replace-object: eliminate replace objects prepared flag
object-store: move lookup_replace_object to replace-object.h
replace-object: move replace_map to object store
replace_object: use oidmap
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
Some codepaths, including the refs API, get and keep relative
paths, that go out of sync when the process does chdir(2). The
chdir-notify API is introduced to let these codepaths adjust these
cached paths to the new current directory.
* jk/relative-directory-fix:
refs: use chdir_notify to update cached relative paths
set_work_tree: use chdir_notify
add chdir-notify API
trace.c: export trace_setup_key
set_git_dir: die when setenv() fails
UTF supports lossless conversion round tripping and conversions between
UTF and other encodings are mostly round trip safe as Unicode aims to be
a superset of all other character encodings. However, certain encodings
(e.g. SHIFT-JIS) are known to have round trip issues [1].
Add 'core.checkRoundtripEncoding', which contains a comma separated
list of encodings, to define for what encodings Git should check the
conversion round trip if they are used in the 'working-tree-encoding'
attribute.
Set SHIFT-JIS as default value for 'core.checkRoundtripEncoding'.
[1] https://support.microsoft.com/en-us/help/170559/prb-conversion-problem-between-shift-jis-and-unicode
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e1111cef23 (inline lookup_replace_object() calls, 2011-05-15) a shortcut
for checking the object replacement was added by setting check_replace_refs
to 0 once the replacements were evaluated to not exist. This works fine in
with the assumption of only one repository in existence.
The assumption won't hold true any more when we work on multiple instances
of a repository structs (e.g. one struct per submodule), as the first
repository to be inspected may have no replacements and would set the
global variable. Other repositories would then completely omit their
evaluation of replacements.
This reverts back the meaning of the flag `check_replace_refs` of
"Do we need to check with the lookup table?" to "Do we need to read
the replacement definition?", adding the bypassing logic to
lookup_replace_object after the replacement definition was read.
As with the original patch, delay the renaming of the global variable
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
