Make 'git submodule add' normalize the submodule path in the
same way as 'git ls-files' does, so that 'git submodule init' looks up
the information in .gitmodules with the same key under which 'git
submodule add' stores it.
This fixes 4 known breakages.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add simple test cases for adding and initialising submodules. The
init step is necessary in order to verify the added information.
The second test exposes a known breakage due to './' in the path: git
ls-files simplifies the path but git add does not, which leads to git
init looking for different lines in .gitmodules than git add adds.
The other tests add test cases for '//' and '..' in the path which
currently fail for the same reason.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mental model for clone is that the branch is "checked
out" (and it even says this in Documentation/git-clone.txt:
"...creates and checks out an initial branch"). Therefore it
is reasonable for users to expect that any post-checkout
hook would be run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Forwards the --stat, --no-stat, and --summary options on to git-rebase.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email supports the --in-reply-to option even with
--no-thread. However, the code that adds the relevant mail headers
was guarded by a test for --thread.
Remove the test, so that the user's choice is respected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When memmem() was imported from glibc 2.2 into compat/, an optimization
was dropped in the process, in order to make the code smaller and simpler.
It was OK because memmem() wasn't used in performance-critical code. Now
the situation has changed and we can benefit from this optimization.
The trick is to avoid calling memcmp() if the first character of the needle
already doesn't match. Checking one character directly is much cheaper
than the function call overhead. We keep the first character of the needle
in the variable named point and the rest in the one named tail.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Windows Vista x64, before:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
And after the patch:
real 0m1.887s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use memmem() instead of open-coding it. The system libraries usually have a
much faster version than the memcmp()-loop here. Even our own fall-back in
compat/, which is used on Windows, is slightly faster.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Ubuntu 8.10 x64, before (v1.6.2-rc2):
8.09user 0.04system 0:08.14elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30952minor)pagefaults 0swaps
And with the patch:
1.50user 0.04system 0:01.54elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30645minor)pagefaults 0swaps
On Fedora 10 x64, before:
8.34user 0.05system 0:08.39elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+29268minor)pagefaults 0swaps
And with the patch:
1.15user 0.05system 0:01.20elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+32253minor)pagefaults 0swaps
On Windows Vista x64, before:
real 0m9.204s
user 0m0.000s
sys 0m0.000s
And with the patch:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue reported by Johannes Sixt on the git mailing list:
> This recipe sends gitk into an endless loop. In git.git do:
>
> cd t
> # remove chmod a+x A near the end of the file
> sed -i 's/chmod/: chmod/' t3400-rebase.sh
> sh t3400-rebase.sh --debug
> cd trash\ directory.t3400-rebase/
> gitk master modechange modechange@{1}
>
>
> I briefly see the history chart, but the dot that should be modechange@{1}
> is missing. One automatically selected commit is shown in the diff section
> below. But then the commit list is cleared and gitk goes into an infinite
> loop.
>
> Things work alright if either modechange@{1} is dropped, or the 'chmod'
> line is left unchanged, which is a bit strange.
>
> This is with git version 1.6.1.2.390.gba743
There were actually two problems. This recipe created a situation where
git log would output a child commit after its parent. This meant that
we called fix_reversal which called splitvarc, which should call modify_arc
to note the fact that it has modified the arc that it has just split. It
wasn't, which meant that displayorder and other variables got into an
inconsistent state (a commit appearing twice in displayorder).
This then meant that the targetrow/targetid logic in drawvisible thought
it need to redraw each time. That, together with the fact that drawvisible
called drawcommits which called drawvisible if a redraw was needed, led
to the infinite loop.
In fact drawvisible is now the only caller of drawcommits. Thus, the
start and end row arguments to drawcommits always encompass the whole
visible area, so drawcommits doesn't need to call drawvisible to redraw;
it just needs to clear the screen and draw what it's been asked to.
This fixes these two problems by adding a call to modify_arc in
splitvarc and by taking out the call to drawvisible in drawcommits.
It also removes an unrelated left-over debugging puts in external_blame.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Call setup_git_directory() before git_config() to make sure git_dir is set
to the proper value.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameters accepted by the --whitespace option of "git apply" have
changed over time, and the documentation for "git rebase" was out of
sync. Remove the specific parameter list from the "git rebase"
documentation and simply point to the "git apply" documentation for
details, as is already done in the "git am" documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors three loops that check if a given packfile is on the
ignore_packed list into a function is_kept_pack(). The function returns
false for a pack on the list, and true for a pack not on the list, because
this list is solely used by "git repack" to pass list of packfiles that do
not have corresponding .keep files, i.e. a packfile not on the list is
"kept".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script used $args and $existing without initializing it to empty. It
would have been confused by an environment variable the end user had
before running it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When %z was removed from the strftime call and subsituted with a
local gmt offset calculation, time() was no longer the default for
all time functions as it was with the previous localtime(shift).
This is now corrected so that format_svn_time behaves as it used to.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this will break things for some extremely rare repositories
used by broken Windows clients, it's probably not worth enabling this by
default as it has negatively affected many more users than it has helped
from what we've seen so far.
The extremely rare repositories that have broken symlinks in them will be
silently corrupted in import; but users can still reenable this option and
restart the import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing output of "git remote show <remote>" with respect to push
ref specs is basically just to show the raw refspec. This patch teaches
the command to interpret the refspecs and show how each branch will be
pushed to the destination. The output gives the user an idea of what
"git push" should do if it is run w/o any arguments.
Example new output:
1a. Typical output with no push refspec (i.e. matching branches only)
$ git remote show origin
* remote origin
[...]
Local refs configured for 'git push':
master pushes to master (up to date)
next pushes to next (local out of date)
1b. Same as above, w/o querying the remote:
$ git remote show origin -n
* remote origin
[...]
Local ref configured for 'git push' (status not queried):
(matching) pushes to (matching)
2a. With a forcing refspec (+), and a new topic
(something like push = refs/heads/*:refs/heads/*):
$ git remote show origin
* remote origin
[...]
Local refs configured for 'git push':
master pushes to master (fast forwardable)
new-topic pushes to new-topic (create)
next pushes to next (local out of date)
pu forces to pu (up to date)
2b. Same as above, w/o querying the remote
$ git remote show origin -n
* remote origin
[...]
Local refs configured for 'git push' (status not queried):
master pushes to master
new-topic pushes to new-topic
next pushes to next
pu forces to pu
3. With a remote configured as a mirror:
* remote backup
[...]
Local refs will be mirrored by 'git push'
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing output of "git remote show <remote>" is too verbose for the
information it provides. This patch teaches it to provide more
information in less space.
The output for push refspecs is addressed in the next patch.
Before the patch:
$ git remote show origin
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: master
Remote branch merged with 'git pull' while on branch master
master
Remote branch merged with 'git pull' while on branch next
next
Remote branches merged with 'git pull' while on branch octopus
foo bar baz frotz
New remote branch (next fetch will store in remotes/origin)
html
Stale tracking branch (use 'git remote prune')
bogus
Tracked remote branches
maint
man
master
next
pu
todo
After this patch:
$ git remote show origin
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: master
Remote branches:
bogus stale (use 'git remote prune' to remove)
html new (next fetch will store in remotes/origin)
maint tracked
man tracked
master tracked
next tracked
pu tracked
todo tracked
Local branches configured for 'git pull':
master rebases onto remote master
next rebases onto remote next
octopus merges with remote foo
and with remote bar
and with remote baz
and with remote frotz
$ git remote show origin -n
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: (not queried)
Remote branches: (status not queried)
bogus
maint
man
master
next
pu
todo
Local branches configured for 'git pull':
master rebases onto remote master
next rebases onto remote next
octopus merges with remote foo
and with remote bar
and with remote baz
and with remote frotz
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual method for determining the ref pointed to by HEAD
is to compare HEAD's sha1 to the sha1 of all refs, trying to
find a unique match.
However, some transports actually get to look at HEAD
directly; we should make use of that information when it is
available. Currently, only http remotes support this
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a porcelain command for setting and deleting
$GIT_DIR/remotes/<remote>/HEAD.
While we're at it, document what $GIT_DIR/remotes/<remote>/HEAD is all
about.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for teaching remote how to set
refs/remotes/<remote>/HEAD to match what HEAD is set to at <remote>, but
is useful in its own right.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remote and stale branches are emitted in alphabetical order, but new and
tracked branches are not. So sort the latter to be consistent with the
former. This also lets us use more efficient string_list_has_string()
instead of unsorted_string_list_has_string().
"show <remote>" prunes symrefs, but "show <remote> -n" does not. Fix the
latter to match the former.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not querying the remote, show() was having to populate
states.tracked itself. It makes more sense for get_remote_ref_states()
to do this consistently. Since show() is the only caller of
get_remote_ref_states() with query=0, this change does not affect
other callers.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- The variable name "remote" is used as both a "char *" and as a "struct
remote *"; this is confusing, so rename the former to remote_name.
- Consistently refer to the refs returned by transport_get_remote_refs()
as remote_refs.
- There is no need to call "sort_string_list(&branch_list)" as
branch_list is populated via string_list_insert(), which maintains its
order.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_ref_states() populates the util pointer of the string_list_item's
that it adds to states->new and states->tracked, but nothing ever uses
the pointer, so we can get rid of the extra code.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves identical lines of code into a cleanup function. The
function has two callers and is about to gain a third.
Also removed a bogus NEEDSWORK comment per Daniel Barkalow:
Actually, the comment is wrong; "remote" comes from remote_get(),
which returns things from a cache in remote.c; there could be a
remote_put() to let the code know that the caller is done with the
object, but it wouldn't presently do anything.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a convenience function for iterating over a string_list's items via
a callback.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_refs() returns non-zero if there is an error in
match_explicit_refs(), without handling any remaining pattern ref specs.
Its existing callers exit upon receiving non-zero, so a partial result
is of no consequence to them; however a new caller, builtin-remote, is
interested in the complete result even if there are errors in
match_explicit_refs().
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some instances, match_refs() sets the peer_ref field of refs in the
dst list such that it points to a ref in the src list. This prevents
callers from freeing both the src and dst lists, as doing so would cause
a double-free since free_refs() frees the peer_ref.
As well, the following configuration causes two refs in the dst list to
have the same peer_ref, which can also lead to a double-free:
push = refs/heads/master:refs/heads/backup
push = refs/heads/master:refs/heads/master
Existing callers of match_heads() call it only once and then terminate,
w/o ever bothering to free the src or dst lists, so this is not
currently a problem.
This patch modifies match_refs() to first copy any refs it plucks from
the src list before assigning them as a peer_ref. This allows
builtin-remote, a future caller, to free the src and dst lists.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Determining HEAD is ambiguous since it is done by comparing SHA1s.
In the case of multiple matches we return refs/heads/master if it
matches, else we return the first match we encounter. builtin-remote
needs all matches returned to it, so add a flag for it to request such.
To be simple and consistent, the return value is now a copy (including
peer_ref) of the matching refs.
Originally contributed by Jeff King along with the prior commit as a
single patch.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ensure that copied refs can always be freed w/o causing a
double-free, make copy_ref() perform a deep copy.
Also have copy_ref() return NULL if asked to copy NULL to simplify
things for the caller.
Background: currently copy_ref() performs a shallow copy. This is fine
for current callers who never free the result and/or only copy refs
which contain NULL pointers. But copy_ref() is about to gain a new
caller (guess_remote_head()) which copies refs where peer_ref is not
NULL and the caller of guess_remote_head() will want to free the result.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
