"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
"git push" learns to discover common ancestor with the receiving
end over protocol v2.
* jt/push-negotiation:
send-pack: support push negotiation
fetch: teach independent negotiation (no packfile)
fetch-pack: refactor command and capability write
fetch-pack: refactor add_haves()
fetch-pack: refactor process_acks()
These strings have not been modified in any translation, nor should they
be.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -i --dry-run" does not dry-run, which was surprising. The
combination of options has taught to error out.
* ow/no-dryrun-in-add-i:
add: die if both --dry-run and --interactive are given
"git p4" learned to find branch points more efficiently.
* jk/p4-locate-branch-point-optim:
git-p4: speed up search for branch parent
git-p4: ensure complex branches are cloned correctly
Over-the-wire protocol learns a new request type to ask for object
sizes given a list of object names.
* ba/object-info:
object-info: support for retrieving object info
The word-diff mode has been taught to work better with a word
regexp that can match an empty string.
* pw/word-diff-zero-width-matches:
word diff: handle zero length matches
In the original ref-filter design, it will copy the parsed
atom's name and attributes to `used_atom[i].name` in the
atom's parsing step, and use it again for string matching
in the later specific ref attributes filling step. It use
a lot of string matching to determine which atom we need.
Introduce the enum "atom_type", each enum value is named
as `ATOM_*`, which is the index of each corresponding
valid_atom entry. In the first step of the atom parsing,
`used_atom.atom_type` will record corresponding enum value
from valid_atom entry index, and then in specific reference
attribute filling step, only need to compare the value of
the `used_atom[i].atom_type` to check the atom type.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the support for "objectsize:disk" was bolted onto the
existing support for "objectsize", it didn't follow the
usual pattern for handling "atomtype:modifier", which reads
the <modifier> part just once while parsing the format
string, and store the parsed result in the union in the
used_atom structure, so that the string form of it does not
have to be parsed over and over at runtime (e.g. in
grab_common_values()).
Add a new member `objectsize` to the union `used_atom.u`,
so that we can separate the check of <modifier> from the
check of <atomtype>, this will bring scalability to atom
`%(objectsize)`.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 878f988350 (t/test-lib: teach --chain-lint to detect broken
&&-chains in subshells, 2018-07-11) introduced additional chain-lint
tests which add an extra "sed" pipeline to each test we run. This has a
measurable impact on runtime. Here are timings with and without a new
environment variable (added by this patch) that lets you disable just
the additional sed-based chain-lint tests:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 make test
Time (mean ± σ): 64.202 s ± 1.030 s [User: 622.469 s, System: 301.402 s]
Range (min … max): 61.571 s … 65.662 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 make test
Time (mean ± σ): 57.591 s ± 0.333 s [User: 529.368 s, System: 270.618 s]
Range (min … max): 57.143 s … 58.309 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 make test' ran
1.11 ± 0.02 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 make test'
Of course those extra lint checks are doing something useful, so paying
a few extra seconds (at least on Linux) isn't so bad (though note the
CPU time; we're bounded in our parallel run here by the slowest test, so
it really is ~120s of CPU improvement).
But we can observe that there are some test scripts where they produce a
much stronger effect, and provide less value. In t0027 and t3070 we run
a very large number of small tests, all driven by a series of
functions/loops which are filling in the test bodies. There we get much
less bang for our buck in terms of bug-finding versus CPU cost.
This patch introduces a mechanism for controlling when those extra
lint checks are run, at two levels:
- a user can ask to disable or to force-enable the checks by setting
GIT_TEST_CHAIN_LINT_HARDER
- if the user hasn't specified a preference, individual scripts can
disable the checks by setting GIT_TEST_CHAIN_LINT_HARDER_DEFAULT;
scripts which don't set that get the current behavior of enabling
them.
In addition, this patch flips the default for t0027 and t3070's
mass-generated sections to disable the extra checks. Here are the timing
results for t0027:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh
Time (mean ± σ): 17.078 s ± 0.848 s [User: 14.878 s, System: 7.075 s]
Range (min … max): 15.952 s … 18.421 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh
Time (mean ± σ): 9.063 s ± 0.759 s [User: 7.890 s, System: 3.362 s]
Range (min … max): 7.747 s … 10.619 s 10 runs
Benchmark #3: ./t0027-auto-crlf.sh
Time (mean ± σ): 9.186 s ± 0.881 s [User: 7.957 s, System: 3.427 s]
Range (min … max): 7.796 s … 10.498 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh' ran
1.01 ± 0.13 times faster than './t0027-auto-crlf.sh'
1.88 ± 0.18 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh'
We can see that disabling the checks for the whole script buys us an
almost 2x speedup. But the new default behavior, disabling them only for
the mass-generated part, gets us most of that speedup (but still leaves
the checks on for further manual tests people might write).
As a side note, I'd caution about comparing runtimes and CPU seconds
between this timing and the earlier "make test" one. In "make test",
we're running a lot of scripts in parallel, so the CPU is throttling
down (and thus a CPU second saved here would count for more during a
parallel run; the same work takes more CPU seconds there).
We get similar results for t3070:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh
Time (mean ± σ): 20.054 s ± 3.967 s [User: 16.003 s, System: 8.286 s]
Range (min … max): 11.891 s … 23.671 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh
Time (mean ± σ): 12.399 s ± 2.256 s [User: 7.542 s, System: 5.342 s]
Range (min … max): 9.606 s … 15.727 s 10 runs
Benchmark #3: ./t3070-wildmatch.sh
Time (mean ± σ): 10.726 s ± 3.476 s [User: 6.790 s, System: 4.365 s]
Range (min … max): 5.444 s … 15.376 s 10 runs
Summary
'./t3070-wildmatch.sh' ran
1.16 ± 0.43 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh'
1.87 ± 0.71 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh'
Again, we get almost a 2x speedup disabling these. In this case, there
are no tests not covered by the script's "default to disable" behavior,
so the second two benchmarks should be the same (and while they do
differ, you can see the variance is quite high but they're within one
standard deviation).
So it seems like for these two scripts, at least, disabling the extra
checks is a reasonable tradeoff. Sadly, the overall runtime of "make
test" on my system doesn't get much faster. But that's because we're
mostly limited by the cost of the single biggest test. Here are the
top-5 tests by wall-clock time from a parallel run, before my patch:
57.9192368984222 t9001-send-email.sh
45.6329638957977 t0027-auto-crlf.sh
32.5278220176697 t3070-wildmatch.sh
22.2701289653778 t7610-mergetool.sh
20.8635759353638 t1701-racy-split-index.sh
And after:
57.1476998329163 t9001-send-email.sh
33.776211977005 t0027-auto-crlf.sh
21.3116669654846 t7610-mergetool.sh
20.7748689651489 t1701-racy-split-index.sh
19.6957249641418 t7112-reset-submodule.sh
We dropped 12s from t0027, and t3070 dropped off our list entirely at
around 16s. In both cases we're bound by t9001, but its slowness is
due to the actual tests, so we'll have to deal with it in a different
way. But this reduces overall CPU, and means that dealing with t9001 (by
improving the speed of send-email or splitting it apart) will let us
reduce our overall runtime even on multi-core machines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git stash show --include-untracked` or
`git stash show --only-untracked` is run on a stash that doesn't include
an untracked entry, a segfault occurs. This happens because we do not
check whether the untracked entry is actually present and just attempt
to blindly dereference it.
Ensure that the untracked entry is present before actually attempting to
dereference it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We reference the non-existent option `git stash show --show-untracked`
when we really meant `--only-untracked`. Correct the test title
accordingly.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A directory that is untracked does not imply that all files under it
should be categorized as untracked; in particular, if the caller is
interested in ignored files, many files or directories underneath the
untracked directory may be ignored. We previously partially handled
this right with DIR_SHOW_IGNORED_TOO, but missed DIR_SHOW_IGNORED. It
was not obvious, though, because the logic for untracked and excluded
files had been fused together making it harder to reason about. The
previous commit split that logic out, making it easier to notice that
DIR_SHOW_IGNORED was missing. Add it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The show_other_directories case in treat_directory() tried to handle
both excludes and untracked files with the same logic, and mishandled
both the excludes and the untracked files in the process, in different
ways. Split that logic apart, and then focus on the logic for the
excludes; a subsequent commit will address the logic for untracked
files.
For show_other_directories, an excluded directory means that
every path underneath that directory will also be excluded. Given that
the calling code requested to just show directories when everything
under a directory had the same state (that's what the
"DIR_SHOW_OTHER_DIRECTORIES" flag means), we generally do not need to
traverse into such directories and can just immediately mark them as
ignored (i.e. as path_excluded). The only reason we cannot just
immediately return path_excluded is the DIR_HIDE_EMPTY_DIRECTORIES flag
and the possibility that the ignored directory is an empty directory.
The code previously treated DIR_SHOW_IGNORED_TOO in most cases as an
exception as well, which was wrong. It can sometimes reduce the number
of cases where we need to recurse (namely if
DIR_SHOW_IGNORED_TOO_MODE_MATCHING is also set), but should not be able
to increase the number of cases where we need to recurse. Fix the logic
accordingly.
Some sidenotes about possible confusion with dir.c:
* "ignored" often refers to an untracked ignore", i.e. a file which is
not tracked which matches one of the ignore/exclusion rules. But you
can also have a "tracked ignore", a tracked file that happens to match
one of the ignore/exclusion rules and which dir.c has to worry about
since "git ls-files -c -i" is supposed to list them.
* The dir code often uses "ignored" and "excluded" interchangeably,
which you need to keep in mind while reading the code.
* "exclude" is used multiple ways in the code:
* As noted above, "exclude" is often a synonym for "ignored".
* The logic for parsing .gitignore files was re-used in
.git/info/sparse-checkout, except there it is used to mark paths that
the user wants to *keep*. This was mostly addressed by commit
65edd96aec ("treewide: rename 'exclude' methods to 'pattern'",
2019-09-03), but every once in a while you'll find a comment about
"exclude" referring to these patterns that might in fact be in use
by the sparse-checkout machinery for inclusion rules.
* The word "EXCLUDE" is also used for pathspec negation, as in
(pathspec->items[3].magic & PATHSPEC_EXCLUDE)
Thus if a user had a .gitignore file containing
*~
*.log
!settings.log
And then ran
git add -- 'settings.*' ':^settings.log'
Then :^settings.log is a pathspec negation making settings.log not
be requested to be added even though all other settings.* files are
being added. Also, !settings.log in the gitignore file is a negative
exclude pattern meaning that settings.log is normally a file we
want to track even though all other *.log files are ignored.
Sometimes it feels like dir.c needs its own glossary with its many
definitions, including the multiply-defined terms.
Reported-by: Jason Gore <Jason.Gore@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit, we added a testcase showing that the directory
traversal machinery sometimes traverses into directories unnecessarily.
Here we show that there are cases where it does the opposite: it does
not traverse into directories, despite those directories having
important files that need to be flagged.
Add a testcase showing that `git ls-files -o -i --directory` can omit
some of the files it should be listing, and another showing that `git
clean -fX` can fail to clean out some of the expected files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The PNPM package manager is apparently creating deeply nested (but
ignored) directory structures; traversing them is costly
performance-wise, unnecessary, and in some cases is even throwing
warnings/errors because the paths are too long to handle on various
platforms. Add a testcase that checks for such unnecessary directory
traversal.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files --ignored can be used together with either --others or
--cached. After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.
While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well. In fact, of two uses in our
testsuite, I believe one of the two did make this error. In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.
-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break. Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 07d90eadb5 (Makefile: add Perl runtime prefix support,
2018-04-10) PERL_DEFINES has been a simply-expanded variable, let's
make it recursively expanded instead.
This change doesn't matter for the correctness of the logic. Whether
we used simply-expanded or recursively expanded didn't change what we
wrote out in GIT-PERL-DEFINES, but being consistent with other rules
makes this easier to understand.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote-https process needs to update it's own instance of
`the_repository' when it sees an HTTP(S) remote is using sha256.
Without this, parse_oid_hex() fails to handle sha256 OIDs when
it's eventually called by parse_fetch().
Tested with:
git clone https://yhbt.net/sha256test.git
GIT_SMART_HTTP=0 git clone https://yhbt.net/sha256test.git
(plain http:// also works)
Cloning the URL via git:// required no changes
Signed-off-by: Eric Wong <e@80x24.org>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
used_atom.u is an union, and it has different members depending on
what atom the auxiliary data the union part of the "struct
used_atom" wants to record. At most only one of the members can be
valid at any one time. Since the code checks u.remote_ref without
even making sure if the atom is "push" or "push:" (which are only
two cases that u.remote_ref.push becomes valid), but u.remote_ref
shares the same storage for other members of the union, the check
was reading from an invalid member, which was the bug.
Modify the condition here to check whether the atom name
equals to "push" or starts with "push:", to avoid reading the
value of invalid member of the union.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: further test fixes]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes two memory leaks when running `git maintenance start` or `git
maintenance stop` in `update_background_schedule`:
$ valgrind --leak-check=full ~/git/bin/git maintenance start
==76584== Memcheck, a memory error detector
==76584== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==76584== Using Valgrind-3.16.1 and LibVEX; rerun with -h for copyright info
==76584== Command: /home/lenaic/git/bin/git maintenance start
==76584==
==76584==
==76584== HEAP SUMMARY:
==76584== in use at exit: 34,880 bytes in 252 blocks
==76584== total heap usage: 820 allocs, 568 frees, 146,414 bytes allocated
==76584==
==76584== 65 bytes in 1 blocks are definitely lost in loss record 17 of 39
==76584== at 0x483E6AF: malloc (vg_replace_malloc.c:306)
==76584== by 0x3DC39C: xrealloc (wrapper.c:126)
==76584== by 0x3992CC: strbuf_grow (strbuf.c:98)
==76584== by 0x39A473: strbuf_vaddf (strbuf.c:392)
==76584== by 0x39BC54: xstrvfmt (strbuf.c:979)
==76584== by 0x39BD2C: xstrfmt (strbuf.c:989)
==76584== by 0x18451B: update_background_schedule (gc.c:1977)
==76584== by 0x1846F6: maintenance_start (gc.c:2011)
==76584== by 0x1847B4: cmd_maintenance (gc.c:2030)
==76584== by 0x127A2E: run_builtin (git.c:453)
==76584== by 0x127E81: handle_builtin (git.c:704)
==76584== by 0x128142: run_argv (git.c:771)
==76584==
==76584== 240 bytes in 1 blocks are definitely lost in loss record 29 of 39
==76584== at 0x4840D7B: realloc (vg_replace_malloc.c:834)
==76584== by 0x491CE5D: getdelim (in /usr/lib/libc-2.33.so)
==76584== by 0x39ADD7: strbuf_getwholeline (strbuf.c:635)
==76584== by 0x39AF31: strbuf_getdelim (strbuf.c:706)
==76584== by 0x39B064: strbuf_getline_lf (strbuf.c:727)
==76584== by 0x184273: crontab_update_schedule (gc.c:1919)
==76584== by 0x184678: update_background_schedule (gc.c:1997)
==76584== by 0x1846F6: maintenance_start (gc.c:2011)
==76584== by 0x1847B4: cmd_maintenance (gc.c:2030)
==76584== by 0x127A2E: run_builtin (git.c:453)
==76584== by 0x127E81: handle_builtin (git.c:704)
==76584== by 0x128142: run_argv (git.c:771)
==76584==
==76584== LEAK SUMMARY:
==76584== definitely lost: 305 bytes in 2 blocks
==76584== indirectly lost: 0 bytes in 0 blocks
==76584== possibly lost: 0 bytes in 0 blocks
==76584== still reachable: 34,575 bytes in 250 blocks
==76584== suppressed: 0 bytes in 0 blocks
==76584== Reachable blocks (those to which a pointer was found) are not shown.
==76584== To see them, rerun with: --leak-check=full --show-leak-kinds=all
==76584==
==76584== For lists of detected and suppressed errors, rerun with: -s
==76584== ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 0 from 0)
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the command line specified by the trailer.<token>.command
configuration variable receives the end-user supplied value was
both error prone and misleading. An alternative to achieve the
same goal in a safer and more intuitive way has been added, as
the trailer.<token>.cmd configuration variable, to replace it.
* zh/trailer-cmd:
trailer: add new .cmd config option
docs: correct descript of trailer.<token>.command
Various test and documentation updates about .gitsomething paths
that are symlinks.
* jk/symlinked-dotgitx-cleanup:
docs: document symlink restrictions for dot-files
fsck: warn about symlinked dotfiles we'll open with O_NOFOLLOW
t0060: test ntfs/hfs-obscured dotfiles
t7450: test .gitmodules symlink matching against obscured names
t7450: test verify_path() handling of gitmodules
t7415: rename to expand scope
fsck_tree(): wrap some long lines
fsck_tree(): fix shadowed variable
t7415: remove out-dated comment about translation
Options to "git pack-objects" that take numeric values like
--window and --depth should not accept negative values; the input
validation has been tightened.
* jk/pack-objects-negative-options-fix:
pack-objects: clamp negative depth to 0
t5316: check behavior of pack-objects --depth=0
pack-objects: clamp negative window size to 0
t5300: check that we produced expected number of deltas
t5300: modernize basic tests
"git submodule update --quiet" did not propagate the quiet option
down to underlying "git fetch", which has been corrected.
* nc/submodule-update-quiet:
submodule update: silence underlying fetch with "--quiet"
A few variants of informational message "Already up-to-date" has
been rephrased.
* js/merge-already-up-to-date-message-reword:
merge: fix swapped "up to date" message components
merge(s): apply consistent punctuation to "up to date" messages
"git bisect skip" when custom words are used for new/old did not
work, which has been corrected.
* rj/bisect-skip-honor-terms:
bisect--helper: use BISECT_TERMS in 'bisect skip' command
When deleting a packed ref via 'update-ref -d', a lockfile is made in
the directory that would contain the loose copy of that ref, creating
any directories in the ref's path that do not exist. When the
transaction completes, the lockfile is deleted, but any empty parent
directories made when creating the lockfile are left in place. These
empty directories are not removed by 'pack-refs' or other housekeeping
tasks and will accumulate over time.
When deleting a loose ref, we remove all empty parent directories at the
end of the transaction.
This commit applies the parent directory cleanup logic used when
deleting loose refs to packed refs as well.
Signed-off-by: Will Chandler <wfc@wfchandler.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove various redundant or obsolete code from the test_create_repo()
function, and split up its use in test-lib.sh from what tests need
from it.
This leave us with a pass-through wrapper for "git init" in
test-lib-functions.sh, in test-lib.sh we have the same, except for
needing to redirect stdout/stderr, and emitting an error ourselves if
it fails. We don't need to error() ourselves when test_create_repo()
is invoked, as the invocation will be a part of a test's "&&"-chain.
Everything below this paragraph is a detailed summary of the history
of test_create_repo() explaining why it's safe to remove the various
things it was doing:
1. "mkdir -p" isn't needed because "git init" itself will create
leading directories if needed.
2. Since we're now a simple wrapper for "git init" we don't need to
check that we have only one argument. If someone wants to run
"test_create_repo --bare x" that's OK.
3. We won't ever hit that "Cannot setup test environment"
error.
Checking the test environment sanity when doing "git init" dates
back to eea420693b (t0000: catch trivial pilot errors.,
2005-12-10) and 2ccd2027b0 (trivial: check, if t/trash directory
was successfully created, 2006-01-05).
We can also see it in another form a bit later in my own
0d314ce834 (test-lib: use subshell instead of cd $new && .. && cd
$old, 2010-08-30).
But since 2006f0adae (t/test-lib: make sure Git has already been
built, 2012-09-17) we already check if we have a built git
earlier.
The one thing this was testing after that 2012 change was that
we'd just built "git", but not "git-init", but since
3af4c7156c (tests: respect GIT_TEST_INSTALLED when initializing
repositories, 2018-11-12) we invoke "git", not "git-init".
So all of that's been checked already, and we don't need to
re-check it here.
4. We don't need to move .git/hooks out of the way.
That dates back to c09a69a83e (Disable hooks during tests.,
2005-10-16), since then hooks became disabled by default in
f98f8cbac0 (Ship sample hooks with .sample suffix, 2008-06-24).
So the hooks were already disabled by default, but as can be seen
from "mkdir .git/hooks" changes various tests needed to re-setup
that directory. Now they no longer do.
This makes us implicitly depend on the default hooks being
disabled, which is a good thing. If and when we'd have any
on-by-default hooks (I see no reason we ever would) we'd want to
see the subtle and not so subtle ways that would break the test
suite.
5. We don't need to "cd" to the "$repo" directory at all anymore.
In the code being removed here we both "cd"'d to the repository
before calling "init", and did so in a subshell.
It's not important to do either, so both of those can be
removed. We cd'd because this code grew from test-lib.sh code
where we'd have done so already, see eedf8f97e5 (Abstract
test_create_repo out for use in tests., 2006-02-17), and later
"cd"'d inside a subshell since 0d314ce834 to avoid having to keep
track of an "old pwd" variable to cd back after the setup.
Being in the repository directory made moving the hooks around
easier (we wouldn't have to fully qualify the path). Since we're
not moving the hooks per #4 above we don't need to "cd" for that
reason either.
6. We can drop the --template argument and instead rely on the
GIT_TEMPLATE_DIR set to the same path earlier in test-lib.sh. See
8683a45d66 (Introduce GIT_TEMPLATE_DIR, 2006-12-19)
7. We only needed that ">&3 2>&4" redirection when invoked from
test-lib.sh.
We could still invoke test_create_repo() there, but as the
invocation is now trivial and we don't have a good reason to use
test_create_repo() elsewhere let's call "git init" there
ourselves.
8. We didn't need to resolve "git" as
"${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" in test_create_repo(),
even for the use of test-lib.sh
PATH is already set up in test-lib.sh to start with
GIT_TEST_INSTALLED and/or GIT_EXEC_PATH before
test_create_repo() (now "git init") is called.. So we can simply
run "git" and rely on the PATH lookup choosing the right
executable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Arrange for the advice about naming the initial branch not to be shown
in the --verbose output of the test suite.
Since 675704c74d (init: provide useful advice about
init.defaultBranch, 2020-12-11) some tests have been very chatty with
repeated occurrences of this multi-line advice. Having it be this
verbose isn't helpful for anyone in the context of git's own test
suite, and it makes debugging tests that use their own "git init"
invocations needlessly distracting.
By setting the GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME variable early in
test-lib.sh itself we'll squash the warning not only for
test_create_repo(), as 675704c74d explicitly intended, but also for
other "git init" invocations.
And once we'd like to have this configuration set for all "git init"
invocations in the test suite we can get rid of the init.defaultBranch
configuration setting in test_create_repo(), as
repo_default_branch_name() in refs.c will take the GIT_TEST_* variable
over it being set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reformat an argument list changed in 675704c74d (init: provide useful
advice about init.defaultBranch, 2020-12-11) to have the "-c" on the
same line as the argument it sets. This whitespace-only change makes
it easier to review a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a use of $GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME added in
704fed9ea2 (tests: start moving to a different default main branch
name, 2020-10-23) to simply discover the initial branch name of a
repository set up in this function with "symbolic-ref --short".
That's something done in another test in 704fed9ea2, so doing it like
this seems like an omission, or rather an overly eager
search/replacement instead of fixing the test logic.
There are only three uses of the GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
variable in the test suite, this gets rid of one of those.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
