When one step in multi step cherry-pick or revert is reset or
committed, the command line prompt script failed to notice the
current status, which has been improved.
* pw/prompt-cherry-pick-revert-fix:
git-prompt: improve cherry-pick/revert detection
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
An incorrect list of options was cached after command line
completion failed (e.g. trying to complete a command that requires
a repository outside one), which has been corrected.
* nd/completion-no-cache-failure:
completion: do not cache if --git-completion-helper fails
If the user commits or resets a conflict resolution in the middle of a
sequence of cherry-picks or reverts then CHERRY_PICK_HEAD/REVERT_HEAD
will be removed and so in the absence of those files we need to check
.git/sequencer/todo to see if there is a cherry-pick or revert in
progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though dwim is enabled by default, it will never be done when
--detached is specified. If you force "-d --guess" you will get an error
because --guess then implies -c which cannot be used with -d. So we can
disable dwim in "switch -d". It makes the completion list in this case a
bit shorter.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git <cmd> --git-completion-helper" could fail if the command checks for
a repo before parse_options(). If the result is cached, later on when
the user moves to a worktree with repo, tab completion will still fail.
Avoid this by detecting errors and not cache the completion output. We
can try again and hopefully succeed next time (e.g. when a repo is
found).
Of course if --git-completion-helper fails permanently because of other
reasons (*), this will slow down completion. But I don't see any better
option to handle that case.
(*) one of those cases is if __gitcomp_builtin is called on a command
that does not support --git-completion-helper. And we do have a
generic call
__git_complete_common "$command"
but this case is protected with __git_support_parseopt_helper so we're
good.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If someone wants to use as a filter a sparse file that is in the
repository, something like "--filter=sparse:oid=<ref>:<path>"
already works.
So 'sparse:path' is only interesting if the sparse file is not in
the repository. In this case though the current implementation has
a big security issue, as it makes it possible to ask the server to
read any file, like for example /etc/password, and to explore the
filesystem, as well as individual lines of files.
If someone is interested in using a sparse file that is not in the
repository as a filter, then at the minimum a config option, such
as "uploadpack.sparsePathFilter", should be implemented first to
restrict the directory from which the files specified by
'sparse:path' can be read.
For now though, let's just disable 'sparse:path' filters.
Helped-by: Matthew DeVore <matvore@google.com>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completion for restore is straightforward. We could still do better
though by giving the list of just tracked files instead of all present
ones. But let's leave it for later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mergetool" learned to offer Sublime Merge (smerge) as one of
its backends.
* da/smerge:
contrib/completion: add smerge to the mergetool completion candidates
mergetools: add support for smerge (Sublime Merge)
This teaches git-submodule the set-branch subcommand which allows the
branch of a submodule to be set through a porcelain command without
having to manually manipulate the .gitmodules file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completion support for --guess could be made better. If no --detach is
given, we should only provide a list of refs/heads/* and dwim ones,
not the entire ref space. But I still can't penetrate that
__git_refs() function yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we made --list-cmds read the local configuration file in an
earlier step, the completion.commands variable respects repo-level
configuration. Use __git which ensures that the proper repo config
is consulted if the command line contains 'git -C /some/other/repo'.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With zsh, "git cmd path<TAB>" was completed to "git cmd path name"
when the completed path has a special character like SP in it,
without any attempt to keep "path name" a single filename. This
has been fixed to complete it to "git cmd path\ name" just like
Bash completion does.
* cy/zsh-completion-SP-in-path:
completion: treat results of git ls-tree as file paths
zsh: complete unquoted paths with spaces correctly
Let's say there are files named 'foo bar.txt', and 'abc def/test.txt' in
repository. When following commands trigger a completion:
git show HEAD:fo<Tab>
git show HEAD:ab<Tab>
The completion results in bash/zsh:
git show HEAD:foo bar.txt
git show HEAD:abc def/
Where the both of them have an unescaped space in paths, so they'll be
misread by git. All entries of git ls-tree either a filename or a
directory, so __gitcomp_file() is proper rather than __gitcomp_nl().
Note the commit f12785a3, which handles quoted paths properly. Like this
case, we should dequote $cur_ for ?*:* case. For example, let's say
there is untracked directory 'abc deg', then trigger a completion:
git show HEAD:abc\ de<Tab>
git show HEAD:'abc de<Tab>
git show HEAD:"abc de<Tab>
should uniquely complete 'abc def', but bash completes 'abc def' and
'abc deg' instead. In zsh, triggering a completion:
git show HEAD:abc\ def/<Tab>
should complete 'test.txt', but nothing comes. The both problems will be
resolved by dequoting paths.
__git_complete_revlist_file() passes arguments to __gitcomp_nl() where
the first one is a list something like:
abc def/Z
foo bar.txt Z
where Z is the mark of the EOL.
- The trailing space of blob in __git ls-tree | sed.
It makes the completion results become:
git show HEAD:foo\ bar.txt\ <CURSOR>
So git will try to find a file named 'foo bar.txt ' instead.
- The trailing slash of tree in __git ls-tree | sed.
It makes the completion results on zsh become:
git show HEAD:abc\ def/ <CURSOR>
So that the last space on command like should be removed on zsh to
complete filenames under 'abc def/'.
Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following is the description of -Q flag of zsh compadd [1]:
This flag instructs the completion code not to quote any
metacharacters in the words when inserting them into the command
line.
Let's say there is a file named 'foo bar.txt' in repository, but it's
not yet added to the repository. Then the following command triggers a
completion:
git add fo<Tab>
git add 'fo<Tab>
git add "fo<Tab>
The completion results in bash:
git add foo\ bar.txt
git add 'foo bar.txt'
git add "foo bar.txt"
While them in zsh:
git add foo bar.txt
git add 'foo bar.txt'
git add "foo bar.txt"
The first one, where the pathname is not enclosed in quotes, should
escape the space with a backslash, just like bash completion does.
Otherwise, this leads git to think there are two files; foo, and
bar.txt.
The main cause of this behavior is __gitcomp_file_direct(). The both
implementions of bash and zsh are called with an argument 'foo bar.txt',
but only bash adds a backslash before a space on command line.
[1]: http://zsh.sourceforge.net/Doc/Release/Completion-Widgets.html
Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The support for format-patch (and send-email) by the command-line
completion script (in contrib/) has been simplified a bit.
* nd/complete-format-patch:
completion: use __gitcomp_builtin for format-patch
The command line completion machinery (in contrib/) has been
updated to allow the completion script to tweak the list of options
that are reported by the parse-options machinery correctly.
* nd/completion-negation:
completion: fix __gitcomp_builtin no longer consider extra options
This helps format-patch gain completion for a couple new options,
notably --range-diff.
Since send-email completion relies on $__git_format_patch_options
which is now reduced, we need to do something not to regress
send-email completion.
The workaround here is implement --git-completion-helper in
send-email.perl just as a bridge to "format-patch --git-completion-helper".
This is enough to use __gitcomp_builtin on send-email (to take
advantage of caching).
In the end, send-email.perl can probably reuse the same info it passes
to GetOptions() to generate full --git-completion-helper output so
that we don't need to keep track of its options in git-completion.bash
anymore. But that's something for another boring day.
Helped-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mergetool" learned to take the "--[no-]gui" option, just like
"git difftool" does.
* dl/mergetool-gui-option:
doc: document diff/merge.guitool config keys
completion: support `git mergetool --[no-]gui`
mergetool: accept -g/--[no-]gui as arguments
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Anmol Mago <anmolmago@gmail.com>
Signed-off-by: Brian Ho <briankyho@gmail.com>
Signed-off-by: David Lu <david.lu97@outlook.com>
Signed-off-by: Ryan Wang <shirui.wang@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp_builtin() has the main completion list provided by
git xxx --git-completion-helper
but the caller can also add extra options that is not provided by
--git-completion-helper. The only call site that does this is "git
difftool" completion.
This support is broken by b221b5ab9b (completion: collapse extra
--no-.. options - 2018-06-06), which adds a special value "--" to mark
that the rest of the options can be hidden by default. The commit
forgets the fact that extra options are appended after
"$(git xxx --git-completion-helper)", i.e. after this "--", and will
be incorrectly hidden as well.
Prepend the extra options before "$(git xxx --git-completion-helper)"
to avoid this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach bash completion that "git fetch --multiple" only takes remote
names as arguments and no refspecs.
* nd/complete-fetch-multiple-args:
completion: support "git fetch --multiple"
Also remove git-cherry from Bash completion because plumbing
commands do not belong there.
Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since stash list accepts git-log options, add the following useful
options that make sense in the context of the `git stash list` command:
--name-status --oneline --patch-with-stat
Signed-off-by: Steven Fernandez <steve@lonetwin.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --multiple is given, the remaining arguments are remote names,
not one remote followed by zero or more refspec. Detect this case,
disable refspec completion, and pretend no remote is seen in order to
complete multiple of them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After using this command extensively for the last two months, this
developer came to the conclusion that even if the dual color mode still
leaves a lot of room for confusion about what was actually changed, the
non-dual color mode is substantially worse in that regard.
Therefore, we really want to make the dual color mode the default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tab completion of `git range-diff` is very convenient, especially
given that the revision arguments to specify the commit ranges to
compare are typically more complex than, say, what is normally passed
to `git log`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
"git remote update" can take both a single remote nickname and a
nickname for remote groups, and the completion script (in contrib/)
has been taught about it.
* ls/complete-remote-update-names:
completion: complete remote names too
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
Work around zsh segfaulting when loading git-completion.zsh
* sg/completion-zsh-workaround:
completion: correct zsh detection when run from git-completion.zsh
v2.18.0-rc0~90^2 (completion: reduce overhead of clearing cached
--options, 2018-04-18) worked around a bug in bash's "set" builtin on
MacOS by using compgen instead. It was careful to avoid breaking zsh
by guarding this workaround with
if [[ -n ${ZSH_VERSION-}} ]]
Alas, this interacts poorly with git-completion.zsh's bash emulation:
ZSH_VERSION='' . "$script"
Correct it by instead using a new GIT_SOURCING_ZSH_COMPLETION shell
variable to detect whether git-completion.bash is being sourced from
git-completion.zsh. This way, the zsh variant is used both when run
from zsh directly and when run via git-completion.zsh.
Reproduction recipe:
1. cd git/contrib/completion && cp git-completion.zsh _git
2. Put the following in a new ~/.zshrc file:
autoload -U compinit; compinit
autoload -U bashcompinit; bashcompinit
fpath=(~/src/git/contrib/completion $fpath)
3. Open zsh and "git <TAB>".
With this patch:
Triggers nice git-completion.bash based tab completion
Without:
contrib/completion/git-completion.bash:354: read-only variable: QISUFFIX
zsh:12: command not found: ___main
zsh:15: _default: function definition file not found
_dispatch:70: bad math expression: operand expected at `/usr/bin/g...'
Segmentation fault
Reported-by: Rick van Hattem <wolph@wol.ph>
Reported-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands that make use of --git-completion-helper feature could
now produce a lot of --no-xxx options that a command can take. This in
many case could nearly double the amount of completable options, using
more screen estate and also harder to search for the wanted option.
This patch attempts to mitigate that by collapsing extra --no-
options, the ones that are added by --git-completion-helper and not in
original struct option arrays. The "--no-..." option will be displayed
in this case to hint about more options, e.g.
> ~/w/git $ git clone --
--bare --origin=
--branch= --progress
--checkout --quiet
--config= --recurse-submodules
--depth= --reference=
--dissociate --reference-if-able=
--filter= --separate-git-dir=
--hardlinks --shallow-exclude=
--ipv4 --shallow-since=
--ipv6 --shallow-submodules
--jobs= --shared
--local --single-branch
--mirror --tags
--no-... --template=
--no-checkout --upload-pack=
--no-hardlinks --verbose
--no-tags
and when you complete it with --no-<tab>, all negative options will be
presented:
> ~/w/git $ git clone --no-
--no-bare --no-quiet
--no-branch --no-recurse-submodules
--no-checkout --no-reference
--no-config --no-reference-if-able
--no-depth --no-separate-git-dir
--no-dissociate --no-shallow-exclude
--no-filter --no-shallow-since
--no-hardlinks --no-shallow-submodules
--no-ipv4 --no-shared
--no-ipv6 --no-single-branch
--no-jobs --no-tags
--no-local --no-template
--no-mirror --no-upload-pack
--no-origin --no-verbose
--no-progress
Corner case: to make sure that people will never accidentally complete
the fake option "--no-..." there must be one real --no- in the first
complete listing even if it's not from the original struct option.
PS. This could could be made simpler with ";&" to fall through from
"--no-*" block and share the code but ";&" is not available on bash-3
(i.e. Mac)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
"git remote update" accepts both groups and single remotes.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line completion (in contrib/) learned to complete pathnames
for various commands better.
* sg/complete-paths:
t9902-completion: exercise __git_complete_index_file() directly
completion: don't return with error from __gitcomp_file_direct()
completion: fill COMPREPLY directly when completing paths
completion: improve handling quoted paths in 'git ls-files's output
completion: remove repeated dirnames with 'awk' during path completion
t9902-completion: ignore COMPREPLY element order in some tests
completion: use 'awk' to strip trailing path components
completion: let 'ls-files' and 'diff-index' filter matching paths
completion: improve handling quoted paths on the command line
completion: support completing non-ASCII pathnames
completion: simplify prefix path component handling during path completion
completion: move __git_complete_index_file() next to its helpers
t9902-completion: add tests demonstrating issues with quoted pathnames
There are 581 config variables as of now when you do "git config
<tab>" which can fill up a few screens and is not very helpful when
you have to look through columns of text to find what you want.
This patch instead shows you only first level when you do
git config <tab>
There are 78 items, which use up 8 rows in my screen. Compared to
screens of text, it's pretty good. Once you have chosen you first
level, e.g. color:
git config color.<tab>
will show you all color.*
This is not a new idea. branch.* and remote.* completion already does
this for second and third levels. For those variables, you'll need to
<tab> three times to get full variable name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config variables are case-insensitive but this case/esac construct is
case-sensitive by default. For bash v4, it'll be easy. For platforms
that are stuck with older versions, we need an external command, but
that is not that critical. And where this additional overhead matters
the most is Windows, but luckily Git for Windows ships with Bash v4.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last patch makes "git config <tab>" shows camelCase names because
that's what's in the source: config.txt. There are still a couple
manual var completion in this code. Let's make them follow the naming
convention as well.
In theory we could automate this part too because we have the
information. But let's stick to one step at a time and leave this for
later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new help option --config-for-completion is a machine friendlier
version of --config where all the placeholders and wildcards are
dropped, leaving only the good, completable prefixes for
git-completion.bash to consume.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
When 7fb6aefd2a (Merge branch 'nd/parseopt-completion' - 2018-03-14)
is merged, the completion for negative form is left out because the
series is alread long and it could be done in a follow up series. This
is it.
--git-completion-helper now provides --no-xxx so that git-completion.bash
can drop the extra custom --no-xxx in the script. It adds a lot more
--no-xxx than what's current provided by the git-completion.bash
script. We'll trim that down later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
