When "make test" is run with the default of "DEFAULT_TEST_TARGET=test"
we'll leave the "test-results" directory in-place, but don't do so for
the "prove" target.
The reason for this is that when 28d836c815 (test: allow running the
tests under "prove", 2010-10-14) allowed for running the tests under
"prove" there was no point in leaving the "test-results" in place.
The "prove" target provides its own summary, so we don't need to run
"aggregate-results", which is the reason we have "test-results" in the
first place. See 2d84e9fb6d (Modify test-lib.sh to output stats to
t/test-results/*, 2008-06-08).
But in a subsequent commit test-lib.sh will start emitting reports of
memory leaks in test-results/*, and it will be useful to analyze these
after the fact.
This wouldn't be a problem as failing tests will halt the removal of
the files (we'll never reach "clean-except-prove-cache" from the
"prove" target), but will be subsequently as we'll want to report a
successful run, but might still have e.g. logs of known memory leaks
in test-results/*.
So let's stop removing this, it's sufficient that "make clean" removes
it, and that "pre-clean" (which both "test" and "prove" depend on)
will remove it, i.e. we'll never have a stale "test-results" because
of this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating at the scale that Scalar wants to support, certain data
shapes are more likely to cause undesirable performance issues, such as
large numbers of loose objects.
By including statistics about this, `scalar diagnose` now makes it
easier to identify such scenarios.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's helpful to see if there are other crud files in the pack
directory. Let's teach the `scalar diagnose` command to gather
file size information about pack files.
While at it, also enumerate the pack files in the alternate
object directories, if any are registered.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When analyzing problems with large worktrees/repositories, it is useful
to know how close to a "full disk" situation Scalar/Git operates. Let's
include this information.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the course of Scalar's development, it became obvious that there is
a need for a command that can gather all kinds of useful information
that can help identify the most typical problems with large
worktrees/repositories.
The `diagnose` command is the culmination of this hard-won knowledge: it
gathers the installed hooks, the config, a couple statistics describing
the data shape, among other pieces of information, and then wraps
everything up in a tidy, neat `.zip` archive.
Note: originally, Scalar was implemented in C# using the .NET API, where
we had the luxury of a comprehensive standard library that includes
basic functionality such as writing a `.zip` file. In the C version, we
lack such a commodity. Rather than introducing a dependency on, say,
libzip, we slightly abuse Git's `archive` machinery: we write out a
`.zip` of the empty try, augmented by a couple files that are added via
the `--add-file*` options. We are careful trying not to modify the
current repository in any way lest the very circumstances that required
`scalar diagnose` to be run are changed by the `diagnose` run itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `scalar` command needs a Scalar enlistment for many subcommands, and
looks in the current directory for such an enlistment (traversing the
parent directories until it finds one).
These is subcommands can also be called with an optional argument
specifying the enlistment. Here, too, we traverse parent directories as
needed, until we find an enlistment.
However, if the specified directory does not even exist, or is not a
directory, we should stop right there, with an error message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09 (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git` executable has these two very useful options:
-C <directory>:
switch to the specified directory before performing any actions
-c <key>=<value>:
temporarily configure this setting for the duration of the
specified scalar subcommand
With this commit, we teach the `scalar` executable the same trick.
Note: It might look like a good idea to try to reuse the
`handle_options()` function in `git.c` instead of replicating only the
`-c`/`-C` part. However, that function is not only not in `libgit.a`, it
is also intricately entangled with the rest of the code in `git.c` that
is necessary e.g. to handle `--paginate`. Besides, no other option
handled by that `handle_options()` function is relevant to Scalar,
therefore the cost of refactoring vastly would outweigh the benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delete an enlistment by first unregistering the repository and then
deleting the enlistment directory (usually the directory containing the
worktree `src/` directory).
On Windows, if the current directory is inside the enlistment's
directory, change to the parent of the enlistment directory, to allow us
to delete the enlistment (directories used by processes e.g. as current
working directories cannot be deleted on Windows).
Co-authored-by: Victoria Dye <vdye@github.com>
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a Scalar upgrade, it can come in really handy if there is an easy
way to reconfigure all Scalar enlistments. This new option offers this
functionality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comes in handy during Scalar upgrades, or when config settings were
messed up by mistake.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like `git clone`, the `scalar clone` command now also offers to
restrict the clone to a single branch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements Scalar's opinionated `clone` command: it tries to use a
partial clone and sets up a sparse checkout by default. In contrast to
`git clone`, `scalar clone` sets up the worktree in the `src/`
subdirectory, to encourage a separation between the source files and the
build output (which helps Git tremendously because it avoids untracked
files that have to be specifically ignored when refreshing the index).
Also, it registers the repository for regular, scheduled maintenance,
and configures a flurry of configuration settings based on the
experience and experiments of the Microsoft Windows and the Microsoft
Office development teams.
Note: since the `scalar clone` command is by far the most commonly
called `scalar` subcommand, we document it at the top of the manual
page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user deleted an enlistment manually, let's be generous and
_still_ unregister it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To test the Scalar command, create a test script in contrib/scalar/t
that is executed as `make -C contrib/scalar test`. Since Scalar has no
meaningful capabilities yet, the only test is rather simple. We will add
more tests in subsequent commits that introduce corresponding, new
functionality.
Note: This test script is intended to test `scalar` only lightly, even
after all of the functionality is implemented.
A more comprehensive functional (or: integration) test suite can be
found at https://github.com/microsoft/scalar; It is used in the workflow
https://github.com/microsoft/git/blob/HEAD/.github/workflows/scalar-functional-tests.yml
in Microsoft's Git fork. This test suite performs end-to-end tests with
a real remote repository, and is run as part of the regular CI and PR
builds in that fork.
Since those tests require some functionality supported only by
Microsoft's Git fork ("GVFS protocol"), there is no intention to port
that fuller test suite to `contrib/scalar/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
