Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also while we are at it, remove redundant typename[] array from
unpack_sha1_header. The only reason it is different from the
type_names[] array in object.c module is that this code cares
about the subset of object types that are valid in a loose
object, so prepare a separate array of boolean that tells us
which types are valid, and share the name translation with the
others.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change unpack_entry_gently and its helper functions to use offsets
rather than addresses and left counts to supply pack position
information. In most cases this makes the code easier to follow,
and it reduces the number of local variables in a few functions.
It also better prepares this code for mapping partial segments of
packs and altering what regions of a pack are mapped while unpacking
an entry.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we're always incrementing both the offset and the pointer we
aren't gaining anything by keeping both. Instead just use the
offset since that's what we were given and what we are expected
to return. Also using offset is likely to make it easier to remap
the pack in the future should partial mapping of very large packs
get implemented.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH 3/5] Cleanup unpack_entry_gently and friends to use type_name array.
This change allows combining all of the non-delta entries into a
single case, as well as to remove an unnecessary local variable
in unpack_entry_gently.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH 2/5] Reuse compression code in unpack_compressed_entry.
This cleans up the code by reusing a perfectly good decompression
implementation at the expense of 1 extra byte of memory allocated in
temporary memory while the delta is being decompressed and applied
to the base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This function was moved above unpack_delta_entry so we can call it
from within unpack_delta_entry without a forward declaration.
This change looks worse than it is. Its really just a relocation
of unpack_non_delta_entry to earlier in the file and renaming the
function to unpack_compressed_entry. No other changes were made.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This declaration probably used to be necessary but the code has
been refactored since to use unpack_entry_gently instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the pack format were to ever change or be extended in the future
there is no assurance that just because the pack file lives in
objects/pack and doesn't end in .idx that we can read and decompress
its contents properly.
If we encounter what we think is a pack file and it isn't or we don't
recognize its version then die and suggest to the user that they
upgrade to a newer version of GIT which can handle that pack file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Fredrik points out the current interface of has_extension() is
potentially confusing. Its parameters include both a nul-terminated
string and a length-limited string.
This patch drops the length argument, requiring two nul-terminated
strings; all callsites are updated. I checked that all of them indeed
provide nul-terminated strings. Filenames need to be nul-terminated
anyway if they are to be passed to open() etc. The performance penalty
of the additional strlen() is negligible compared to the system calls
which inevitably surround has_extension() calls.
Additionally, change has_extension() to use size_t inside instead of
int, as that is the exact type strlen() returns and memcmp() expects.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The little helper has_extension() documents through its name what we are
trying to do and makes sure we don't forget the underrun check.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This exposes map_sha1_file() interface to mmap a loose object file,
and legacy_loose_object() function, split from unpack_sha1_header().
They will be used in the next patch to reuse the deflated data from
new-style loose object files when generating packs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The pack-file format is slightly different from the traditional git
object format, in that it has a much denser binary header encoding.
The traditional format uses an ASCII string with type and length
information, which is somewhat wasteful.
A new object format starts with uncompressed binary header
followed by compressed payload -- this will allow us later to
copy the payload straight to packfiles.
Obviously they cannot be read by older versions of git, so for
now new object files are created with the traditional format.
core.legacyheaders configuration item, when set to false makes
the code write in new format for people to experiment with.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds <torvalds@osdl.org> wrote:
It's entirely possible that we should just make that whole
if (ret == ENOENT)
go away. Yes, it's the right error code if a subdirectory is missing, and
yes, POSIX requires it, and yes, WXP is probably just a horrible piece of
sh*t, but on the other hand, I don't think git really has any serious
reason to even care.
Nobody else uses them, and I'm going to start changing them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This doesn't make the code uglier or harder to read, yet it makes the
code more portable. This also simplifies checking for other potential
incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible
constructs as warnings, but C99 comments will cause it to emit an error.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the change in default, "git add ." on kernel dir is about
twice as fast as before, with only minimal (0.5%) change in
object size. The speed difference is even more noticeable
when committing large files, which is now up to 8 times faster.
The configurability is through setting core.compression = [-1..9]
which maps to the zlib constants; -1 is the default, 0 is no
compression, and 1..9 are various speed/size tradeoffs, 9
being slowest.
Signed-off-by: Joachim B Haga (cjhaga@fys.uio.no)
Acked-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in
various ways. Usually the strategy that required the least changes was used.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were a few calls to adjust_shared_perm() that were
missing:
- init-db creates refs, refs/heads, and refs/tags before
reading from templates that could specify sharedrepository in
the config file;
- updating config file created it under user's umask without
adjusting;
- updating refs created it under user's umask without
adjusting;
- switching branches created .git/HEAD under user's umask
without adjusting.
This moves adjust_shared_perm() from sha1_file.c to path.c,
since a few SIMPLE_PROGRAM need to call repository configuration
functions which in turn need to call adjust_shared_perm().
sha1_file.c needs to link with SHA1 computation library which
is usually not linked to SIMPLE_PROGRAM.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When adding packs, skip the pack if we already have it in the packed_git
list. This might happen if we are re-preparing our packs because of a
missing object.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch causes read_sha1_file and sha1_object_info to re-examine the
list of packs if an object cannot be found. It works by re-running
prepare_packed_git() after an object fails to be found.
It does not attempt to clean up the old pack list. Old packs which are in
use can continue to be used (until unused by lru selection). New packs
are placed at the front of the list and will thus be examined before old
packs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up and future-proofs the sha1 file writing in sha1_file.c.
In particular, instead of doing a simple "write()" call and just verifying
that it succeeds (or - as in one place - just assuming it does), it uses
"write_buffer()" to write data to the file descriptor while correctly
checking for partial writes, EINTR etc.
It also splits up write_sha1_to_fd() to be a lot more readable: if we need
to re-create the compressed object, we do so in a separate helper
function, making the logic a whole lot more modular and obvious.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
Fix pack-index issue on 64-bit platforms a bit more portably.
Install git-send-email by default
Fix compilation on newer NetBSD systems
git config syntax updates
Another config file parsing fix.
checkout: use --aggressive when running a 3-way merge (-m).
Apparently <stdint.h> is not enough for uint32_t on OpenBSD; use
"unsigned int" -- hopefully that would stay 32-bit on every
platform we care about, at least until we update the pack-index
file format.
Our sha1 routines optimized for architectures use uint32_t and
expects '#include <stdint.h>' to be enough, so OpenBSD on arm or
ppc might have similar issues down the road, I dunno.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The offset of an object in the pack is recorded as a 4-byte integer
in the index file. When reading the offset from the mmap'ed index
in prepare_pack_revindex(), the address is dereferenced as a long*.
This works fine as long as the long type is four bytes wide. On
NetBSD/sparc64, however, a long is 8 bytes wide and so dereferencing
the offset produces garbage.
[jc: taking suggestion by Linus to use uint32_t]
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When adding an alternate object store then add entries from its
info/alternates files, too.
Relative entries are only allowed in the current repository.
Loops and duplicate alternates through multiple repositories are ignored.
Just to be sure that nothing breaks it is not allow to build deep
nesting levels using info/alternates.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somebody on the #git channel complained that the sha1_to_hex() thing uses
a static buffer which caused an error message to show the same hex output
twice instead of showing two different ones.
That's pretty easily rectified by making it uses a simple LRU of a few
buffers, which also allows some other users (that were aware of the buffer
re-use) to be written in a more straightforward manner.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Serge E. Hallyn noticed that we compute how many input bytes are
still left, but did not use it for sanity checking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently we unpack the delta data from the pack and then unpack
the base object to apply that delta data to it. When getting an
object that is deeply deltified, we can reduce memory footprint
by unpacking the base object first and then unpacking the delta
data, because we will need to keep at most one delta data in
memory that way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When generating a new pack, notice if we have already needed
objects in existing packs. If an object is stored deltified,
and its base object is also what we are going to pack, then
reuse the existing deltified representation unconditionally,
bypassing all the expensive find_deltas() and try_deltas()
calls.
Also, notice if what we are going to write out exactly match
what is already in an existing pack (either deltified or just
compressed). In such a case, we can just copy it instead of
going through the usual uncompressing & recompressing cycle.
Without this patch, in linux-2.6 repository with about 1500
loose objects and a single mega pack:
$ git-rev-list --objects v2.6.16-rc3 >RL
$ wc -l RL
184141 RL
$ time git-pack-objects p <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects....................
a1fc7b3e537fcb9b3c46b7505df859f0a11e79d2
real 12m4.323s
user 11m2.560s
sys 0m55.950s
With this patch, the same input:
$ time ../git.junio/git-pack-objects q <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects.....................
a1fc7b3e537fcb9b3c46b7505df859f0a11e79d2
Total 184141, written 184141, reused 182441
real 1m2.608s
user 0m55.090s
sys 0m1.830s
Signed-off-by: Junio C Hamano <junkio@cox.net>
