Instead of barfing, simply ignore bad object names seen in the
input. This is useful when reading from "git notes list" output
that may refer to objects that have already been garbage collected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --count is used with --cherry-mark, omit the patch equivalent
commits from the count for left and right commits and print the count of
equivalent commits separately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
Introduce --min-parents and --max-parents options which limit the
revisions to those commits which have at least (or at most) that many
commits, where negative arguments for --max-parents= denote infinity
(i.e. no upper limit).
In particular:
--max-parents=1 is the same as --no-merges;
--min-parents=2 is the same as --merges;
--max-parents=0 shows only roots; and
--min-parents=3 shows only octopus merges
Using --min-parents=n and --max-parents=m with n>m gives you what you ask
for (i.e. nothing) for obvious reasons, just like when you give --merges
(show only merge commits) and --no-merges (show only non-merge commits) at
the same time.
Also, introduce --no-min-parents and --no-max-parents to do the obvious
thing for convenience.
We compute the number of parents only when we limit by that, so there
is no performance impact when there are no limiters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
Currently, commit marks (left, right, boundary, cherry) are output right
before the commit sha1, which makes it difficult to copy sha1s. Sample
output for "git log --oneline --cherry":
=049c269 t6007: test rev-list --cherry
Change this to
= 049c269 t6007: test rev-list --cherry
which matches exactly the current output of "git log --graph".
Leave "git rev-list" output as is (no space) so that they do not break.
Adjust "git-svn" which uses "git log --pretty=raw --boundary".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for marking those commits which "--cherry-pick" would drop.
The marker for those commits is '=' because '-' denotes a boundary
commit already, even though 'git cherry' uses it.
Nonequivalent commits are denoted '+' unless '--left-right' is used.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "--cherry-pick" does not work with unsymmetric ranges
(A..B) for obvious reasons.
Introduce "--left-only" and "--right-only" which limit the output to
commits on the respective sides of a symmetric range (i.e. only "<"
resp. ">" commits as per "--left-right").
This is especially useful for things like
git log --cherry-pick --right-only @{u}...
which is much more flexible (and descriptive) than
git cherry @{u} | sed -ne 's/^+ //p'
and potentially more useful than
git log --cherry-pick @{u}...
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By passing the path to a submodule in opt->submodule, the function can
be used to walk history in the named submodule repository, instead of
the toplevel repository.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --count option that, instead of actually listing the commits,
merely counts them.
This is mostly geared towards script use, and to this end it acts
specially when used with --left-right: it outputs the left and right
counts separately. Previously, scripts would have to run a shell loop
or small inline script over to achieve the same. (Without
--left-right, a simple |wc -l does the job.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rev-list A..H" computes the set of commits that are ancestors of H, but
excludes the ones that are ancestors of A. This is useful to see what
happened to the history leading to H since A, in the sense that "what does
H have that did not exist in A" (e.g. when you have a choice to update to
H from A).
x---x---A---B---C <-- topic
/ \
x---x---x---o---o---o---o---M---D---E---F---G <-- dev
/ \
x---o---o---o---o---o---o---o---o---o---o---o---N---H <-- master
The result in the above example would be the commits marked with caps
letters (except for A itself, of course), and the ones marked with 'o'.
When you want to find out what commits in H are contaminated with the bug
introduced by A and need fixing, however, you might want to view only the
subset of "A..B" that are actually descendants of A, i.e. excluding the
ones marked with 'o'. Introduce a new option --ancestry-path to compute
this set with "rev-list --ancestry-path A..B".
Note that in practice, you would build a fix immediately on top of A and
"git branch --contains A" will give the names of branches that you would
need to merge the fix into (i.e. topic, dev and master), so this may not
be worth paying the extra cost of postprocessing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but
asking for combined patch with "show -c" didn't turn the patch output
format on; the placement of this logic in setup_revisions() dates back to
cd2bdc5 (Common option parsing for "git log --diff" and friends,
2006-04-14).
This unfortunately cannot be done as a trivial change of "if dense
combined is asked, default to patch format" done in setup_revisions() to
"if any combined is asked, default to patch format", as "diff-tree -c"
needs to default to raw, while "diff-tree --cc" needs to default to patch,
and they share the codepath. These command specific defaults are now
handled in the new "tweak" callback that can be customized by individual
command implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far the last parameter to setup_revisions() was to specify the default
ref when the command line did not give any (typically "HEAD"). This changes
it to take a pointer to a structure so that we can add other information without
touching too many codepaths in later patches.
There is no functionality change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving "Notes" information in the default output format of "log" and
"show" is a sensible progress (the user has asked for it by having the
notes), but for some commands (e.g. "format-patch") spewing notes into the
formatted commit log message without being asked is too aggressive.
Enable notes output only for "log", "show", "whatchanged" by default and
only when the user didn't ask any specific --pretty/--format from the
command line; users can explicitly override this default with --show-notes
and --no-notes option.
Parts of tests are taken from Jeff King's fix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/log-stdin:
Add trivial tests for --stdin option to log family
Make --stdin option to "log" family read also pathspecs
setup_revisions(): do not call get_pathspec() too early
Teach --stdin option to "log" family
read_revision_from_stdin(): use strbuf
Conflicts:
revision.c
Move the logic to read revs from standard input that rev-list knows about
from it to revision machinery, so that all the users of setup_revisions()
can feed the list of revs from the standard input when "--stdin" is used
on the command line.
Allow some users of the revision machinery that want different semantics
from the "--stdin" option to disable it by setting an option in the
rev_info structure.
This also cleans up the kludge made to bundle.c via cut and paste.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I personally use "git bisect visualize" all the time when I bisect, but it
turns out that that is not a very flexible model. Sometimes I want to do
bisection based on all commits (no pathname limiting), but then visualize
the current bisection tree with just a few pathnames because I _suspect_
those pathnames are involved in the problem but am not totally sure about
them.
And at other times, I want to use other revision parsing logic, none of
which is available with "git bisect visualize".
So this adds "--bisect" as a revision parsing argument, and as a result it
just works with all the normal logging tools. So now I can just do
gitk --bisect --simplify-by-decoration filename-here
etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show a reflog, we have two ways of naming the entry:
by sequence number (e.g., HEAD@{0}) or by date (e.g.,
HEAD@{10 minutes ago}). There is no explicit option to set
one or the other, but we guess based on whether or not the
user has provided us with a date format, showing them the
date version if they have done so, and the sequence number
otherwise.
This usually made sense if the use did something like "git
log -g --date=relative". However, it didn't make much sense
if the user set the date format using the log.date config
variable; in that case, all of their reflogs would end up as
dates.
This patch records the source of the date format and only
triggers the date-based view if --date= was given on the
command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously, graph_is_interesting() did not behave quite the same way as
the code in get_revision(). As a result, it would sometimes think
commits were uninteresting, even though get_revision() would return
them. This resulted in incorrect lines in the graph output.
This change creates a get_commit_action() function, which
graph_is_interesting() and simplify_commit() both now use to determine
if a commit will be shown. It is identical to the old simplify_commit()
behavior, except that it never calls rewrite_parents().
This problem was reported by Santi Béjar. The following command
would exhibit the problem before, but now works correctly:
git log --graph --simplify-by-decoration --oneline v1.6.3.3
Previously git graph did not display the output for this command
correctly between f29ac4f and 66996ec, among other places.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I do various statistics on git, and one of the things I look at is merges,
because they are often interesting events to count ("how many merges vs
how much 'real development'" kind of statistics). And you can do it with
some fairly straightforward scripting, ie
git rev-list --parents HEAD |
grep ' .* ' |
git diff-tree --always -s --pretty=oneline --stdin |
less -S
will do it.
But I finally got irritated with the fact that we can skip merges with
'--no-merges', but we can't do the trivial reverse operation.
So this just adds a '--merges' flag that _only_ shows merges. Now you can
do the above with just a
git log --merges --pretty=oneline
which is a lot simpler. It also means that we automatically get a lot of
statistics for free, eg
git shortlog -ns --merges
does exactly what you'd want it to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the logic of rev_compare_tree() by removing a special
case.
It does so by turning the special case of finding a diff to be "all new
files" into a more generic case of "all new" vs "all removed" vs "mixed
changes", so now the code is actually more powerful and more generic, and
the added symmetry actually makes it simpler too.
This makes no changes to any existing behavior, but apart from the
simplification it does make it possible to some day care about whether all
changes were just deletions if we want to. Which we may well want to for
merge handling.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/pack-object-memuse:
show_object(): push path_name() call further down
process_{tree,blob}: show objects without buffering
Conflicts:
builtin-pack-objects.c
builtin-rev-list.c
list-objects.c
list-objects.h
upload-pack.c
In particular, pushing the "path_name()" call _into_ the show() function
would seem to allow
- more clarity into who "owns" the name (ie now when we free the name in
the show_object callback, it's because we generated it ourselves by
calling path_name())
- not calling path_name() at all, either because we don't care about the
name in the first place, or because we are actually happy walking the
linked list of "struct name_path *" and the last component.
Now, I didn't do that latter optimization, because it would require some
more coding, but especially looking at "builtin-pack-objects.c", we really
don't even want the whole pathname, we really would be better off with the
list of path components.
Why? We use that name for two things:
- add_preferred_base_object(), which actually _wants_ to traverse the
path, and now does it by looking for '/' characters!
- for 'name_hash()', which only cares about the last 16 characters of a
name, so again, generating the full name seems to be just unnecessary
work.
Anyway, so I didn't look any closer at those things, but it did convince
me that the "show_object()" calling convention was crazy, and we're
actually better off doing _less_ in list-objects.c, and giving people
access to the internal data structures so that they can decide whether
they want to generate a path-name or not.
This patch does that, and then for people who did use the name (even if
they might do something more clever in the future), it just does the
straightforward "name = path_name(path, component); .. free(name);" thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here's a less trivial thing, and slightly more dubious one.
I was looking at that "struct object_array objects", and wondering why we
do that. I have honestly totally forgotten. Why not just call the "show()"
function as we encounter the objects? Rather than add the objects to the
object_array, and then at the very end going through the array and doing a
'show' on all, just do things more incrementally.
Now, there are possible downsides to this:
- the "buffer using object_array" _can_ in theory result in at least
better I-cache usage (two tight loops rather than one more spread out
one). I don't think this is a real issue, but in theory..
- this _does_ change the order of the objects printed. Instead of doing a
"process_tree(revs, commit->tree, &objects, NULL, "");" in the loop
over the commits (which puts all the root trees _first_ in the object
list, this patch just adds them to the list of pending objects, and
then we'll traverse them in that order (and thus show each root tree
object together with the objects we discover under it)
I _think_ the new ordering actually makes more sense, but the object
ordering is actually a subtle thing when it comes to packing
efficiency, so any change in order is going to have implications for
packing. Good or bad, I dunno.
- There may be some reason why we did it that odd way with the object
array, that I have simply forgotten.
Anyway, now that we don't buffer up the objects before showing them
that may actually result in lower memory usage during that whole
traverse_commit_list() phase.
This is seriously not very deeply tested. It makes sense to me, it seems
to pass all the tests, it looks ok, but...
Does anybody remember why we did that "object_array" thing? It used to be
an "object_list" a long long time ago, but got changed into the array due
to better memory usage patterns (those linked lists of obejcts are
horrible from a memory allocation standpoint). But I wonder why we didn't
do this back then. Maybe there's a reason for it.
Or maybe there _used_ to be a reason, and no longer is.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/format-patch-patchname:
format_sanitized_subject: Don't trim past initial length of strbuf
log-tree: fix patch filename computation in "git format-patch"
format-patch: --numbered-files and --stdout aren't mutually exclusive
format-patch: --attach/inline uses filename instead of SHA1
format-patch: move get_patch_filename() into log-tree
format-patch: pass a commit to reopen_stdout()
format-patch: construct patch filename in one function
pretty.c: add %f format specifier to format_commit_message()
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
Currently when format-patch is used with --attach or --inline the patch
attachment has the SHA1 of the commit for its filename. This replaces
the SHA1 with the filename used by format-patch when outputting to
files.
Fix tests relying on the SHA1 output and add a test showing how the
--suffix option affects the attachment filename output.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-1.6.0-keep-pack:
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors three loops that check if a given packfile is on the
ignore_packed list into a function is_kept_pack(). The function returns
false for a pack on the list, and true for a pack not on the list, because
this list is solely used by "git repack" to pass list of packfiles that do
not have corresponding .keep files, i.e. a packfile not on the list is
"kept".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, format-patch can only track a single reference (the
In-Reply-To:) for each mail. To ensure proper threading, we should
list all known references for every mail.
Change the rev_info.ref_message_id field to a string_list, so that we
can append references at will, and change the output formatting
routines to print all of them in the References: header. The last
entry in the list is implicitly assumed to be the In-Reply-To:, which
gives output consistent with RFC 2822:
The "References:" field will contain the contents of the parent's
"References:" field (if any) followed by the contents of the
parent's "Message-ID:" field (if any).
Note that this is just preparatory work; nothing uses it yet, so all
"References:" fields in the output are still only one deep.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this, you can simplify history not by the contents of the tree, but
whether a commit has been named (ie it's referred to by some branch or
tag) or not.
This makes it possible to see the relationship between different named
commits, without actually seeing any of the details.
When used with pathspec, you would get the usual view that is limited to
the commits that change the contents of the tree plus commits that are
named.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will want to add decorations without necessarily showing them, so add
an explicit revisions info flag as to whether we're showing decorations
or not.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support decorating commits by tags or branches that point to
them, but especially when we are looking at multiple branches together,
we sometimes want to see _how_ we reached a particular commit.
We can abuse the '->util' field in the commit to keep track of that as
we walk the commit lists, and get a reasonably useful view into which
branch or tag first reaches that commit.
Of course, if the commit is reachable through multiple sources (which is
common), our particular choice of "first" reachable is entirely random
and depends on the particular path we happened to follow.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
--reverse did not interact well with --parents, as the included test
case shows: in a history like
A--B.
\ \
`C--M--D
the command
git rev-list --reverse --parents --full-history HEAD
erroneously lists D as having no parents at all. (Without --reverse,
it correctly lists M.)
This is caused by the machinery driving --reverse: it first grabs all
commits through the normal routines, then runs them through the same
routines again, effectively simplifying them twice.
Fix this by moving the --reverse one level up, into get_revision().
This way we can cleanly grab all commits via the normal calls, then
just pop them off the list one by one without interfering with
get_revision_internal().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been broken in v1.6.0 due to the reorganization of
the revision option parsing code. The "-i" is completely
ignored, but works fine in "git log --grep -i".
What happens is that the code for "-i" looks for
revs->grep_filter; if it is NULL, we do nothing, since there
are no grep filters. But that is obviously not correct,
since we want it to influence the later --grep option. Doing
it the other way around works, since "-i" just impacts the
existing grep_filter option.
Instead, we now always initialize the grep_filter member and
just fill in options and patterns as we get them. This means
that we can no longer check grep_filter for NULL, but
instead must check the pattern list to see if we have any
actual patterns.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable show_early_output is defined in revision.c and should be
declared extern in revision.h so that the linker does not complain
about multiply defined variables.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The users of revision walking machinery may want to use the util pointer
for their own use. Use decoration to hold the data needed during merge
simplification instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --full-history traversal keeps all merges in addition to non-merge
commits that touch paths in the given pathspec. This is useful to view
both sides of a merge in a topology like this:
A---M---o
/ /
---O---B
even when A and B makes identical change to the given paths. The revision
traversal without --full-history aims to come up with the simplest history
to explain the final state of the tree, and one of the side branches can
be pruned away.
The behaviour to keep all merges however is inconvenient if neither A nor
B touches the paths we are interested in. --full-history reduces the
topology to:
---O---M---o
in such a case, without removing M.
This adds a post processing phase on top of --full-history traversal to
remove needless merges from the resulting history.
The idea is to compute, for each commit in the "full history" result set,
the commit that should replace it in the simplified history. The commit
to replace it in the final history is determined as follows:
* In any case, we first figure out the replacement commits of parents of
the commit we are looking at. The commit we are looking at is
rewritten as if the replacement commits of its original parents are its
parents. While doing so, we reduce the redundant parents from the
rewritten parent list by not just removing the identical ones, but also
removing a parent that is an ancestor of another parent.
* After the above parent simplification, if the commit is a root commit,
an UNINTERESTING commit, a merge commit, or modifies the paths we are
interested in, then the replacement commit of the commit is itself. In
other words, such a commit is not dropped from the final result.
The first point above essentially means that the history is rewritten in
the bottom up direction. We can rewrite the parent list of a commit only
after we know how all of its parents are rewritten. This means that the
processing needs to happen on the full history (i.e. after limit_list()).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to set the TOPOSORT flag of commits during the topological
sorting, but we can just as well use the member "indegree" for it:
indegree is now incremented by 1 in the cases where the commit used
to have the TOPOSORT flag.
This is the same behavior as before, since indegree could not be
non-zero when TOPOSORT was unset.
Incidentally, this fixes the bug in show-branch where the 8th column
was not shown: show-branch sorts the commits in topological order,
assuming that all the commit flags are available for show-branch's
private matters.
But this was not true: TOPOSORT was identical to the flag corresponding
to the 8th ref. So the flags for the 8th column were unset by the
topological sorting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-step-blame:
revisions: refactor handle_revision_opt into parse_revision_opt.
git-shortlog: migrate to parse-options partially.
git-blame: fix lapsus
git-blame: migrate to incremental parse-option [2/2]
git-blame: migrate to incremental parse-option [1/2]
revisions: split handle_revision_opt() from setup_revisions()
parse-opt: add PARSE_OPT_KEEP_ARGV0 parser option.
parse-opt: fake short strings for callers to believe in.
parse-opt: do not print errors on unknown options, return -2 intead.
parse-opt: create parse_options_step.
parse-opt: Export a non NORETURN usage dumper.
parse-opt: have parse_options_{start,end}.
git-blame --reverse
builtin-blame.c: allow more than 16 parents
builtin-blame.c: move prepare_final() into a separate function.
rev-list --children
revision traversal: --children option
* jc/report-tracking:
branch -r -v: do not spit out garbage
stat_tracking_info(): clear object flags used during counting
git-branch -v: show the remote tracking statistics
git-status: show the remote tracking statistics
Refactor "tracking statistics" code used by "git checkout"
It seems we're using handle_revision_opt the same way each time, have a
wrapper around it that does the 9-liner we copy each time instead.
handle_revision_opt can be static in the module for now, it's always
possible to make it public again if needed.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two fields to struct rev_info:
- .def to store --default argument; and
- .show_merge 1-bit field.
handle_revision_opt() is able to deal with any revision option, and
consumes them, and leaves revision arguments or pseudo arguments
(like --all, --not, ...) in place.
For now setup_revisions() does a pass of handle_revision_opt() again
so that code not using it in a parse-opt parser still work the same.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading rev-list parameters from the command line can be reused by
commands other than rev-list. Move this function to more "library-ish"
place to promote code reuse.
Signed-off-by: Adam Brewster <asb@bu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When left-right traversal counts the commits in a diverged history, it
leaves the flags in the commits smudged, and we need to clear them before
we return. Otherwise the caller cannot inspect other branches with this
function again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option causes a text-based representation of the history to be
printed to the left of the normal output.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change allows parent rewriting to be performed without causing
the log and rev-list commands to print the parents.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a new --children option to the revision machinery. In addition
to the list of parents, child commits of each commit are computed and
stored as a decoration to each commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attached patch introduces a single bit "use_terminator" in "struct
rev_info", which is normally false (i.e. most formats use separator
semantics) but by flipping it to true, you can ask for terminator
semantics just like oneline format does.
The function get_commit_format(), which is what parses "--pretty=" option,
now takes a pointer to "struct rev_info" and updates its commit_format and
use_terminator fields. It used to return the value of type "enum
cmit_fmt", but all the callers assigned it to rev->commit_format.
There are only two cases the code turns use_terminator on. Obviously, the
traditional oneline format (--pretty=oneline) is one of them, and the new
case is --pretty=tformat:... that acts like --pretty=format:... but flips
the bit on.
With this, "--pretty=tformat:%H %s" acts like --pretty=oneline.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/cover-letter:
Improve collection of information for format-patch --cover-letter
Add API access to shortlog
t4014: Replace sed's non-standard 'Q' by standard 'q'
Support a --cc=<email> option in format-patch
Combine To: and Cc: headers
Fix format.headers not ending with a newline
Add tests for extra headers in format-patch
Add a --cover-letter option to format-patch
Export some email and pretty-printing functions
Improve message-id generation flow control for format-patch
Add more tests for format-patch
Conflicts:
builtin-log.c
builtin-shortlog.c
pretty.c
It's really not very easy to visualize the commit walker, because - on
purpose - it obvously doesn't show the uninteresting commits!
This adds a "--show-all" flag to the revision walker, which will make
it show uninteresting commits too, and they'll have a '^' in front of
them (it also fixes a logic error for !verbose_header for boundary
commits - we should show the '-' even if left_right isn't shown).
A separate patch to gitk to teach it the new '^' was sent
to paulus. With the change in place, it actually is interesting
even for the cases that git doesn't have any problems with, ie
for the kernel you can do:
gitk -d --show-all v2.6.24..
and you see just how far down it has to parse things to see it all. The
use of "-d" is a good idea, since the date-ordered toposort is much better
at showing why it goes deep down (ie the date of some of those commits
after 2.6.24 is much older, because they were merged from trees that
weren't rebased).
So I think this is a useful feature even for non-debugging - just to
visualize what git does internally more.
When it actually breaks out due to the "everybody_uninteresting()"
case, it adds the uninteresting commits (both the one it's looking at
now, and the list of pending ones) to the list
This way, we really list *all* the commits we've looked at.
Because we now end up listing commits we may not even have been parsed
at all "show_log" and "show_commit" need to protect against commits
that don't have a commit buffer entry.
That second part is debatable just how it should work. Maybe we shouldn't
show such entries at all (with this patch those entries do get shown, they
just don't get any message shown with them). But I think this is a useful
case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of warning the user that it is expecting git log output from
the standard input (and waiting for the user to type the log from
the keyboard, which is a silly thing to do), default to traverse from
HEAD when there is no rev parameter given and the standard input is
a tty.
This factors out a useful helper "add_head()" from builtin-diff.c to a
more appropriate place revision.c while renaming it to more descriptive
name add_head_to_pending(), as that is what the function is about.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot tell a node that has been checked and found not to be
interesting (which does not have the TREECHANGE flag) from a
node that hasn't been checked if it is interesting or not,
without relying on something else, such as object->parsed.
But an object can get the "parsed" flag for other reasons.
Which means that "TREECHANGE" has the wrong polarity.
This changes the way how the path pruning logic marks an
uninteresting commits. From now on, we consider a commit
interesting by default, and explicitly mark the ones we decided
to prune. The flag is renamed to "TREESAME".
Then, this fixes the logic to show the early output with
incomplete pruning. It basically says "a commit that has
TREESAME set is kind-of-UNINTERESTING", but obviously in a
different way than an outright UNINTERESTING commit. Until we
parse and examine enough parents to determine if a commit
becomes surely "kind-of-UNINTERESTING", we avoid rewriting
the ancestry so that later rounds can fix things up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the unnecessary indirection of "revs->prune_fn",
since that function is always the same one (or NULL), and there
is in fact not even an abstraction reason to make it a function
(i.e. its not called from some other file and doesn't allow us
to keep the function itself static or anything like that).
It then just replaces it with a bit that says "prune or not",
and if not pruning, every commit gets TREECHANGE.
That in turn means that
- if (!revs->prune_fn || (flags & TREECHANGE))
- if (revs->prune_fn && !(flags & TREECHANGE))
just become
- if (flags & TREECHANGE)
- if (!(flags & TREECHANGE))
respectively.
Together with adding the "single_parent()" helper function, the "complex"
conditional now becomes
if (!(flags & TREECHANGE) && rev->dense && single_parent(commit))
continue;
Also indirection of "revs->dense" checking is thrown away the
same way, because TREECHANGE bit is set appropriately now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes --early-output a bit more advanced, and actually makes it
generate multiple "Final output:" headers as it updates things
asynchronously. I realize that the "Final output:" line is now illogical,
since it's not really final until it also says "done", but
It now _always_ generates a "Final output:" header in front of any commit
list, and that output header gives you a *guess* at the maximum number of
commits available. However, it should be noted that the guess can be
completely off: I do a reasonable job estimating it, but it is not meant
to be exact.
So what happens is that you may get output like this:
- at 0.1 seconds:
Final output: 2 incomplete
.. 2 commits listed ..
- half a second later:
Final output: 33 incomplete
.. 33 commits listed ..
- another half a second after that:
Final output: 71 incomplete
.. 71 commits listed ..
- another half second later:
Final output: 136 incomplete
.. 100 commits listed: we hit the --early-output limit, and
.. will only output 100 commits, and after this you'll not
.. see an "incomplete" report any more since you got as much
.. early output as you asked for!
- .. and then finally:
Final output: 73106 done
.. all the commits ..
The above is a real-life scenario on my current kernel tree after having
flushed all the caches.
Tested with the experimental gitk patch that Paul sent out, and by looking
at the actual log output (and verifying that my commit count guesses
actually match real life fairly well).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds support for "--early-output[=n]" as a flag to the "git log"
family of commands. This allows GUI programs to state that they want to
get some output early, in order to be able to show at least something
quickly, even if the full output may take longer to generate.
If no count is specified, a default count of a hundred commits will be
used, although the actual numbr of commits output may be smaller
depending on how many commits were actually found in the first tenth of
a second (or if *everything* was found before that, in which case no
early output will be provided, and only the final list is made
available).
When the full list is generated, there will be a "Final output:" string
prepended to it, regardless of whether any early commits were shown or
not, so that the consumer can always know the difference between early
output and the final list.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.. by not using quite so much indirection.
This currently grows the "struct commit" a bit, which could be avoided by
using a union for "util" and "indegree" (the topo-sort used to use "util"
anyway, so you cannot use them together), but for now the goal of this was
to simplify, not optimize.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a crash in broken repositories where random commits
suddenly disappear.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --date={local,relative,default} option to log family of commands,
to allow displaying timestamps in user's local timezone, relative time, or
the default format.
Existing --relative-date option is a synonym of --date=relative; we could
probably deprecate it in the long run.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is meant to be a saner replacement for "git-cherry".
When used with "A...B", this filters out commits whose patch
text has the same patch-id as a commit on the other side. It
would probably most useful to use with --left-right.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a new option to git-format-patch, entitled --subject-prefix that allows
control of the subject prefix '[PATCH]'. Using this option, the text 'PATCH' is
replaced with whatever input is provided to the option. This allows easily
generating patches like '[PATCH 2.6.21-rc3]' or properly numbered series like
'[-mm3 PATCH N/M]'. This patch provides the implementation and documentation.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If your development history does not have fast-forward merges,
i.e. the "first parent" of commits in your history are special
than other parents, this option gives a better overview of the
evolution of a particular branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/boundary:
git-bundle: prevent overwriting existing bundles
git-bundle: die if a given ref is not included in bundle
git-bundle: handle thin packs in subcommand "unbundle"
git-bundle: Make thin packs
git-bundle: avoid packing objects which are in the prerequisites
bundle: fix wrong check of read_header()'s return value & add tests
revision --boundary: fix uncounted case.
revision --boundary: fix stupid typo
git-bundle: make verify a bit more chatty.
revision traversal: SHOWN means shown
git-bundle: various fixups
revision traversal: retire BOUNDARY_SHOW
revision walker: Fix --boundary when limited
This removes the flag internally used by revision traversal to
decide which commits are indeed boundaries and renames it to
CHILD_SHOWN. builtin-bundle uses the symbol for its
verification, but I think the logic it uses it is wrong. The
flag is still useful but it is local to the git-bundle, so it is
renamed to PREREQ_MARK.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the boundary processing in the commit walker. It
- rips out the boundary logic from the commit walker. Placing
"negative" commits in the revs->commits list was Ok if all we
cared about "boundary" was the UNINTERESTING limiting case,
but conceptually it was wrong.
- makes get_revision_1() function to walk the commits and return
the results as if there is no funny postprocessing flags such
as --reverse, --skip nor --max-count.
- makes get_revision() function the postprocessing phase:
If reverse is given, wait for get_revision_1() to give
everything that it would normally give, and then reverse it
before consuming.
If skip is given, skip that many before going further.
If max is given, stop when we gave out that many.
Now that we are about to return one positive commit, mark
the parents of that commit to be potential boundaries
before returning, iff we are doing the boundary processing.
Return the commit.
- After get_revision() finishes giving out all the positive
commits, if we are doing the boundary processing, we look at
the parents that we marked as potential boundaries earlier,
see if they are really boundaries, and give them out.
It loses more code than it adds, even when the new gc_boundary()
function, which is purely for early optimization, is counted.
Note that this patch is purely for eyeballing and discussion
only. It breaks git-bundle's verify logic because the logic
does not use BOUNDARY_SHOW flag for its internal computation
anymore. After we correct it not to attempt to affect the
boundary processing by setting the BOUNDARY_SHOW flag, we can
remove BOUNDARY_SHOW from revision.h and use that bit assignment
for the new CHILD_SHOWN flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The option --reverse reverses the order of the commits.
[jc: with comments on rev_info.reverse from Simon 'corecode' Schubert.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When called with "--walk-reflogs", as long as there are reflogs
available, the walker will take this information into account, rather
than the parent information in the commit object.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updated commit objects record the encoding used in their
encoding header. This updates the log family to reencode it
into the encoding specified in i18n.commitencoding (or the
default, which is "utf-8") upon output.
To force a specific encoding that is different, log family takes
command line flag --encoding=<encoding>; giving --encoding=none
entirely disables the reencoding and lets you view log messges
in their original encoding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --skip=<n> option to revision traversal machinery.
Documentation and test were added by Robert Fitzsimons.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 5761231975.
Feeding symmetric difference to gitk is so useful, and it is the
same for other graphical Porcelains. Rather than forcing them
to pass --no-left-right, making it optional.
Noticed and reported by Jeff King.
When using symmetric differences, I think the user almost always
would want to know which side of the symmetry each commit came
from. So this removes --left-right option from the command
line, and turns it on automatically when a symmetric difference
is used ("git log --merge" counts as a symmetric difference
between HEAD and MERGE_HEAD).
Just in case, a new option --no-left-right is provided to defeat
this, but I do not know if it would be useful.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The output from "symmetric diff", i.e. A...B, does not
distinguish between commits that are reachable from A and the
ones that are reachable from B. In this picture, such a
symmetric diff includes commits marked with a and b.
x---b---b branch B
/ \ /
/ .
/ / \
o---x---a---a branch A
However, you cannot tell which ones are 'a' and which ones are
'b' from the output. Sometimes this is frustrating. This adds
an output option, --left-right, to rev-list.
rev-list --left-right A...B
would show ones reachable from A prefixed with '<' and the ones
reachable from B prefixed with '>'.
When combined with --boundary, boundary commits (the ones marked
with 'x' in the above picture) are shown with prefix '-', so you
would see list that looks like this:
git rev-list --left-right --boundary --pretty=oneline A...B
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 3rd on b
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 2nd on b
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3rd on a
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 2nd on a
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on b
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on a
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we can tell the built-in grep to grep only in head or in
body, use that to update --author, --committer, and --grep.
Unfortunately, to make --and, --not and other grep boolean
expressions useful, as in:
# Things written by Junio committed and by Linus and log
# does not talk about diff.
git log --author=Junio --and --committer=Linus \
--grep-not --grep=diff
we will need to do another round of built-in grep core
enhancement, because grep boolean expressions are designed to
work on one line at a time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is from a suggestion by Linus, just to mark the locations where we
need to modify to actually implement the filtering.
We do not have any actual filtering code yet.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Incremental repack without -a essentially boils down to:
rev-list --objects --unpacked --all |
pack-objects $new_pack
which picks up all loose objects that are still live and creates
a new pack.
This implements --unpacked=<existing pack> option to tell the
revision walking machinery to pretend as if objects in such a
pack are unpacked for the purpose of object listing. With this,
we could say:
rev-list --objects --unpacked=$active_pack --all |
pack-objects $new_pack
instead, to mean "all live loose objects but pretend as if
objects that are in this pack are also unpacked". The newly
created pack would be perfect for updating $active_pack by
replacing it.
Since pack-objects now knows how to do the rev-list's work
itself internally, you can also write the above example by:
pack-objects --unpacked=$active_pack --all $new_pack </dev/null
Signed-off-by: Junio C Hamano <junkio@cox.net>
setup_revisions() wants to get all the parameters at once and
then postprocesses the resulting revs structure after it is done
with them. This code structure is a bit cumbersome to deal with
efficiently when we want to inject revision parameters from the
side (e.g. read from standard input).
Fortunately, the nature of this postprocessing is not affected by
revision parameters; they are affected only by flags. So it is
Ok to do add_object() after the it returns.
This splits out the code that deals with the revision parameter
out of the main loop of setup_revisions(), so that we can later
call it from elsewhere after it returns.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Any git command that expects to work in a subdirectory of a project, and
that reads the git config files (which is just about all of them) needs to
make sure that it does the "setup_git_directory()" call before it tries to
read the config file.
This means, among other things, that we need to move the call out of
"init_revisions()", and into the caller.
This does the mostly trivial conversion to do that.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
