Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
enable/disable colored output when the pager is in use
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The pack-file format is slightly different from the traditional git
object format, in that it has a much denser binary header encoding.
The traditional format uses an ASCII string with type and length
information, which is somewhat wasteful.
A new object format starts with uncompressed binary header
followed by compressed payload -- this will allow us later to
copy the payload straight to packfiles.
Obviously they cannot be read by older versions of git, so for
now new object files are created with the traditional format.
core.legacyheaders configuration item, when set to false makes
the code write in new format for people to experiment with.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the change in default, "git add ." on kernel dir is about
twice as fast as before, with only minimal (0.5%) change in
object size. The speed difference is even more noticeable
when committing large files, which is now up to 8 times faster.
The configurability is through setting core.compression = [-1..9]
which maps to the zlib constants; -1 is the default, 0 is no
compression, and 1..9 are various speed/size tradeoffs, 9
being slowest.
Signed-off-by: Joachim B Haga (cjhaga@fys.uio.no)
Acked-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch is based on Pasky's, with three notable differences:
- I did not yet update the documentation
- I named it .gitconfig, not .gitrc
- git-repo-config does not barf when a unique key is overridden locally
The last means that if you have something like
[alias]
l = log --stat -M
in ~/.gitconfig, and
[alias]
l = log --stat -M next..
in $GIT_DIR/config, then
git-repo-config alias.l
returns only one value, namely the value from $GIT_DIR/config.
If you set the environment variable GIT_CONFIG, $HOME/.gitconfig is not
read, and neither $GIT_DIR/config, but $GIT_CONFIG instead.
If you set GIT_CONFIG_LOCAL instead, it is interpreted instead of
$GIT_DIR/config, but $HOME/.gitconfig is still read.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When setting a config variable, git_config_set() ignored the variables
GIT_CONFIG and GIT_CONFIG_LOCAL. Now, when GIT_CONFIG_LOCAL is set, it
will write to that file. If not, GIT_CONFIG is checked, and only as a
fallback, the change is written to $GIT_DIR/config.
Add a test for it, and also future-proof the test for the upcoming
$HOME/.gitconfig support.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add $GIT_CONFIG environment variable whose content is used instead
of .git/config if set. Also add $GIT_CONFIG_LOCAL as a
forward-compatibility cue for whenever we will finally come to support]
global configuration files (properly).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were a few calls to adjust_shared_perm() that were
missing:
- init-db creates refs, refs/heads, and refs/tags before
reading from templates that could specify sharedrepository in
the config file;
- updating config file created it under user's umask without
adjusting;
- updating refs created it under user's umask without
adjusting;
- switching branches created .git/HEAD under user's umask
without adjusting.
This moves adjust_shared_perm() from sha1_file.c to path.c,
since a few SIMPLE_PROGRAM need to call repository configuration
functions which in turn need to call adjust_shared_perm().
sha1_file.c needs to link with SHA1 computation library which
is usually not linked to SIMPLE_PROGRAM.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If config parameter core.logAllRefUpdates is true or the log
file already exists then append a line to ".git/logs/refs/<ref>"
whenever git-update-ref <ref> is executed. Each log line contains
the following information:
oldsha1 <SP> newsha1 <SP> committer <LF>
where committer is the current user, date, time and timezone in
the standard GIT ident format. If the caller is unable to append
to the log file then git-update-ref will fail without updating <ref>.
An optional message may be included in the log line with the -m flag.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the hierarchical section name syntax to
[section<space>+"<randomstring>"]
where the only rule for "randomstring" is that it can't contain a newline,
and if you really want to insert a double-quote, you do it with \".
It turns that into the section name "secion.randomstring". The
"section" part is still case insensitive, but the "randomstring"
part is case sensitive.
So you could use this for things like
[email "torvalds@osdl.org"]
name = Linus Torvalds
if you wanted to do the "email->name" conversion as part of the config
file format (I'm not claiming that is sensible, I'm just giving it as an
insane example). That would show up as the association
email.torvalds@osdl.org.name -> Linus Torvalds
which is easy to parse (the "." in the email _looks_ ambiguous, but it
isn't: you know that there will always be a single key-name, so you find
the key name with "strrchr(name, '.')" and things are entirely
unambiguous).
Repo-config is updated to be able to parse the new format, and also
write things out in the new format.
[jc: rolled two patches from Linus and one fix-up from Sean into one,
with additional adjustments for t/t1300 test to check the case
insensitiveness of section base and variable and case sensitiveness
of the extended section part. Then stripped some part off to make
the result applicable to the stale 1.3.X series that does not have
recent enhancements. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the variable we need to store should go into a section
that currently only has a single variable (not matching
the one we're trying to insert), we will already be into
the next section before we notice we've bypassed the correct
location to insert the variable.
To handle this case we store the current location as soon
as we find a variable matching the section of our new
variable.
This breakage was brought up by Linus.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When inspecting a project whose build infrastructure used to
assume that .git/HEAD is a symlink ref, core.prefersymlinkrefs
in the config file of such a project would help to bisect its
history.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 9f0bb90d16 commit)
Earlier, calling
git-repo-config core.hello
on a .git/config like this:
[core]
hello = world ; a comment
would yield "world " (i.e. with a trailing space).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from c1aee1fd8d commit)
Currently, if the target key has a section that matches
the initial substring of another section we mistakenly
believe we've found the correct section. To avoid this
problem, ensure that the section lengths are identical
before comparison.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds a Documentation/config.txt file included by git-repo-config
and currently aggregating hopefully all the available git plumbing / core
porcelain configuration variables, as well as briefly describing the format.
It also updates an outdated bit of the example in git-repo-config(1).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Config_filename and lockfile are strduped and then leaked in
git_config_set_multivar.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds "assume unchanged" logic, started by this message in the list
discussion recently:
<Pine.LNX.4.64.0601311807470.7301@g5.osdl.org>
This is a workaround for filesystems that do not have lstat()
that is quick enough for the index mechanism to take advantage
of. On the paths marked as "assumed to be unchanged", the user
needs to explicitly use update-index to register the object name
to be in the next commit.
You can use two new options to update-index to set and reset the
CE_VALID bit:
git-update-index --assume-unchanged path...
git-update-index --no-assume-unchanged path...
These forms manipulate only the CE_VALID bit; it does not change
the object name recorded in the index file. Nor they add a new
entry to the index.
When the configuration variable "core.ignorestat = true" is set,
the index entries are marked with CE_VALID bit automatically
after:
- update-index to explicitly register the current object name to the
index file.
- when update-index --refresh finds the path to be up-to-date.
- when tools like read-tree -u and apply --index update the working
tree file and register the current object name to the index file.
The flag is dropped upon read-tree that does not check out the index
entry. This happens regardless of the core.ignorestat settings.
Index entries marked with CE_VALID bit are assumed to be
unchanged most of the time. However, there are cases that
CE_VALID bit is ignored for the sake of safety and usability:
- while "git-read-tree -m" or git-apply need to make sure
that the paths involved in the merge do not have local
modifications. This sacrifices performance for safety.
- when git-checkout-index -f -q -u -a tries to see if it needs
to checkout the paths. Otherwise you can never check
anything out ;-).
- when git-update-index --really-refresh (a new flag) tries to
see if the index entry is up to date. You can start with
everything marked as CE_VALID and run this once to drop
CE_VALID bit for paths that are modified.
Most notably, "update-index --refresh" honours CE_VALID and does
not actively stat, so after you modified a file in the working
tree, update-index --refresh would not notice until you tell the
index about it with "git-update-index path" or "git-update-index
--no-assume-unchanged path".
This version is not expected to be perfect. I think diff
between index and/or tree and working files may need some
adjustment, and there probably needs other cases we should
automatically unmark paths that are marked to be CE_VALID.
But the basics seem to work, and ready to be tested by people
who asked for this feature.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that the stat against open race would matter much in this context,
but that simplifies
the code a bit. Also some diagnostics added (why the open failed)
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fprintf and die sometimes have missing/excessive "\n" in their arguments,
correct the strings where I think it would be appropriate.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to hold what the project-local rule as to the
charset/encoding for the commit log message is. Lack of it
defaults to utf-8.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes init-db repository version aware.
It checks if an existing config file says the repository being
reinitialized is of a wrong version and aborts before doing
further harm.
When copying the templates, it makes sure the they are of the
right repository format version. Otherwise the templates are
ignored with an warning message.
It copies the templates before creating the HEAD, and if the
config file is copied from the template directory, reads it,
primarily to pick up the value of core.symrefsonly.
It changes the way the result of the filemode reliability test
is written to the configuration file using git_config_set().
The test is done even if the config file was copied from the
templates.
And finally, our own repository format version is written to the
config file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is purely cosmetic, but avoid shadowing "FILE *config_file"
global in git_config_set_multivar() function.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would end up linking all the unneeded stuff into git-daemon
only to link with git_default_config.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A .git/config like follows becomes valid with this patch:
[remote.junio]
url = git://git.kernel.org/pub/scm/git/git.git
pull = master:junio todo:todo +pu:pu
[remote.ibook]
url = ibook:git/
pull = master:ibook
push = master:quetzal
(This patch only does the ini file thing, git-fetch and friends still
ignore these values).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a lowercase version of the key was generated, it was not
terminated. Strangely enough, it worked on Linux and macosx anyway.
Just cygwin barfed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend the regex syntax of value_regex so that prepending an exclamation
mark means non-match:
[core]
quetzal = "Dodo" for Brainf*ck
quetzal = "T. Rex" for Malbolge
quetzal = "cat"
You can match the third line with
git-config-set --get quetzal '! for '
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... namely
--replace-all, to replace any amount of matching lines, not just 0 or 1,
--get, to get the value of one key,
--get-all, the multivar version of --get, and
--unset-all, which deletes all matching lines from .git/config
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The function git_config_set() does exactly what you think it does.
Given a key (in the form "core.filemode") and a value, it sets the
key to the value. Example:
git_config_set("core.filemode", "true");
The function git_config_set_multivar() is meant for setting variables which
can have several values for the same key. Example:
[diff]
twohead = resolve
twohead = recarsive
the typo in the second line can be replaced by
git_config_set_multivar("diff.twohead", "recursive", "^recar");
The third argument of the function is a POSIX extended regex which has to
match the value. If there is no key/value pair with a matching value, a new
key/value pair is added.
These commands are also capable of unsetting (deleting) entries:
git_config_set_multivar("diff.twohead", NULL, "sol");
will delete the entry
twohead = resolve
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A while ago, a rename-detection limit logic was implemented as a
response to this thread:
http://marc.theaimsgroup.com/?l=git&m=112413080630175
where gitweb was found to be using a lot of time and memory to
detect renames on huge commits. git-diff family takes -l<num>
flag, and if the number of paths that are rename destination
candidates (i.e. new paths with -M, or modified paths with -C)
are larger than that number, skips rename/copy detection even
when -M or -C is specified on the command line.
This commit makes the rename detection limit easier to use. You
can have:
[diff]
renamelimit = 30
in your .git/config file to specify the default rename detection
limit. You can override this from the command line; giving 0
means 'unlimited':
git diff -M -l0
We might want to change the default behaviour, when you do not
have the configuration, to limit it to say 20 paths or so. This
would also help the diffstat generation after a big 'git pull'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to force git to avoid symlinks for refs. Just add
something like
[core]
symrefsonly = true
to .git/config.
Don´t forget to "git checkout your_branch", or it does not do anything...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unfortunate people may have to use $GIT_DIR/config edited on
DOSsy machine on UNIXy machine. Ignore '\r' immediately
followed by '\n'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do our own ctype.h, just to get the sane semantics: we want
locale-independence, _and_ we want the right signed behaviour. Plus we
only use a very small subset of ctype.h anyway (isspace, isalpha,
isdigit and isalnum).
Signed-off-by: Junio C Hamano <junkio@cox.net>
They always were meant to be case-insensitive, but I had missed one
"tolower()", making that not true.
The actual _values_ aren't case-insensitive, of course, although some uses
of them may be (ie boolean parsing uses "strcasecmp()" to match against
the strings "true" and "false").
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This starts using the "user.name" and "user.email" config variables if
they exist as the default name and email when committing. This means
that you don't have to use the GIT_COMMITTER_EMAIL environment variable
to override your email - you can just edit the config file instead.
The patch looks bigger than it is because it makes the default name and
email information non-static and renames it appropriately. And it moves
the common git environment variables into a new library file, so that
you can link against libgit.a and get the git environment without having
to link in zlib and libcrypt.
In short, most of it is renaming and moving, the real change core is
just a few new lines in "git_default_config()" that copies the user
config values to the new base.
It also changes "git-var -l" to list the config variables.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I had meant to disallow unknown escape characters in the config file
parser, but instead an unknown escaped character would silently pass
through as itself. That's correct for some cases (notably '\' itself), but
wasn't correct in general.
This fixes it, and makes the parser write a nice error message if the
config file contains bogus escaped characters.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a first cut at a very simple parser for a git config file.
The format of the file is a simple ini-file like thing, with simple
variable/value pairs. You can (and should) make the variables have a
simple single-level scope, ie a valid file looks something like this:
#
# This is the config file, and
# a '#' or ';' character indicates
# a comment
#
; core variables
[core]
; Don't trust file modes
filemode = false
; Our diff algorithm
[diff]
external = "/usr/local/bin/gnu-diff -u"
renames = true
which parses into three variables: "core.filemode" is associated with the
string "false", and "diff.external" gets the appropriate quoted value.
Right now we only react to one variable: "core.filemode" is a boolean that
decides if we should care about the 0100 (user-execute) bit of the stat
information. Even that is just a parsing demonstration - this doesn't
actually implement that st_mode compare logic itself.
Different programs can react to different config options, although they
should always fall back to calling "git_default_config()" on any config
option name that they don't recognize.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
