"git format-patch --output=there" did not work as expected and
instead crashed. The option is now supported.
* jk/format-patch-output:
format-patch: support --output option
format-patch: tie file-opening logic to output_directory
format-patch: refactor output selection
"git log -L<range>:<path>" is documented to take no pathspec, but
this was not enforced by the command line option parser, which has
been corrected.
* jc/line-log-takes-no-pathspec:
log: diagnose -L used with pathspec as an error
The code to see if "git stash drop" can safely remove refs/stash
has been made more carerful.
* rs/empty-reflog-check-fix:
stash: simplify reflog emptiness check
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
"git checkout-index" did not consistently signal an error with its
exit status.
* jk/checkout-index-errors:
checkout-index: propagate errors to exit code
checkout-index: drop error message from empty --stage=all
We've never intended to support diff's --output option in format-patch.
And until baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27), it was impossible to trigger. We
first parse the format-patch options before handing the remainder off to
setup_revisions(). Before that commit, we'd accept "--output=foo" as an
abbreviation for "--output-directory=foo". But afterwards, we don't
check abbreviations, and --output gets passed to the diff code.
This results in nonsense behavior and bugs. The diff code will have
opened a filehandle at rev.diffopt.file, but we'll overwrite that with
our own handles that we open for each individual patch file. So the
--output file will always just be empty. But worse, the diff code also
sets rev.diffopt.close_file, so log_tree_commit() will close the
filehandle itself. And then the main loop in cmd_format_patch() will try
to close it again, resulting in a double-free.
The simplest solution would be to just disallow --output with
format-patch, as nobody ever intended it to work. However, we have
accidentally documented it (because format-patch includes diff-options).
And it does work with "git log", which writes the whole output to the
specified file. It's easy enough to make that work for format-patch,
too: it's really the same as --stdout, but pointed at a specific file.
We can detect the use of the --output option by the "close_file" flag
(note that we can't use rev.diffopt.file, since the diff setup will
otherwise set it to stdout). So we just need to unset that flag, but
don't have to do anything else. Our situation is otherwise exactly like
--stdout (note that we don't fclose() the file, but nor does the stdout
case; exiting the program takes care of that for us).
Reported-by: Johannes Postler <johannes.postler@txture.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In format-patch we're either outputting to stdout or to individual files
in an output directory (which may be just "./"). Our logic for whether
to open a new file for each patch is checked with "!use_stdout", but it
is equally correct to check for a non-NULL output_directory.
The distinction will matter when we add a new single-stream output in a
future patch, when only one of the three methods will want individual
files. Let's swap the logic here in preparation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdout and --output-directory options are mutually exclusive, but
it's hard to tell from reading the code. We have three separate
conditionals that check for use_stdout, and it's only after we've set up
the output_directory fully that we check whether the user also specified
--stdout.
Instead, let's check the exclusion explicitly first, then have a single
conditional that handles stdout versus an output directory. This is
slightly easier to follow now, and also will keep things sane when we
add another output mode in a future patch.
We'll add a few tests as well, covering the mutual exclusion and the
fact that we are not confused by a configured output directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L option is documented to accept no pathspec, but the
command line option parser has allowed the combination without
checking so far. Ensure that there is no pathspec when the -L
option is in effect to fix this.
Incidentally, this change fixes another bug in the command line
option parser, which has allowed the -L option used together
with the --follow option. Because the latter requires exactly
one path given, but the former takes no pathspec, they become
mutually incompatible automatically. Because the -L option
follows renames on its own, there is no reason to give --follow
at the same time.
The new tests say they may fail with "-L and --follow being
incompatible" instead of "-L and pathspec being incompatible".
Currently the expected failure can come only from the latter, but
this is to futureproof them, in case we decide to add code to
explicititly die on -L and --follow used together.
Heled-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" family of commands learned the "-I<regex>" option to
ignore hunks whose changed lines all match the given pattern.
* mk/diff-ignore-regex:
diff: add -I<regex> that ignores matching changes
merge-base, xdiff: zero out xpparam_t structures
"git credential' didn't honor the core.askPass configuration
variable (among other things), which has been corrected.
* tk/credential-config:
credential: load default config
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
Test-coverage enhancement of running commit-graph task "git
maintenance" as needed led to discovery and fix of a bug.
* ds/maintenance-commit-graph-auto-fix:
maintenance: core.commitGraph=false prevents writes
maintenance: test commit-graph auto condition
"git fast-import" wasted a lot of memory when many marks were in use.
* jk/fast-import-marks-alloc-fix:
fast-import: fix over-allocation of marks storage
Calling rev-parse to check if the drop subcommand removed the last stash
and treating its failure as confirmation is fragile, as the command can
fail for other reasons, e.g. because the system is out of memory.
Directly check if the reflog is empty instead, which is more robust.
Reported-by: Marek Mrva <mrva@eof-studios.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to specify the repository to use. Rename the function to
repo_clear_commit_marks to document its new scope. No functional change
intended.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
"git checkout" learned to use checkout.guess configuration variable
and enable/disable its "--[no-]guess" option accordingly.
* dl/checkout-guess:
checkout: learn to respect checkout.guess
Documentation/config/checkout: replace sq with backticks
"git checkout -p A...B [-- <path>]" did not work, even though the
same command without "-p" correctly used the merge-base between
commits A and B.
* dl/checkout-p-merge-base:
t2016: add a NEEDSWORK about the PERL prerequisite
add-patch: add NEEDSWORK about comparing commits
Doc: document "A...B" form for <tree-ish> in checkout and switch
builtin/checkout: fix `git checkout -p HEAD...` bug
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
"git push --force-with-lease[=<ref>]" can easily be misused to lose
commits unless the user takes good care of their own "git fetch".
A new option "--force-if-includes" attempts to ensure that what is
being force-pushed was created after examining the commit at the
tip of the remote ref that is about to be force-replaced.
* sk/force-if-includes:
t, doc: update tests, reference for "--force-if-includes"
push: parse and set flag for "--force-if-includes"
push: add reflog check for "--force-if-includes"
"git worktree list" now shows if each worktree is locked. This
possibly may open us to show other kinds of states in the future.
* rs/worktree-list-show-locked:
worktree: teach `list` to annotate locked worktree
If we encounter an error while checking out an explicit path, we print a
message to stderr but do not actually exit with a non-zero code. While
this is a plumbing command and the behavior goes all the way back to
33db5f4d90 (Add a "checkout-cache" command which does what the name
suggests., 2005-04-09), this is almost certainly an oversight:
- we _do_ return an exit code from checkout_file(); the caller just
never reads it
- errors while checking out all paths (with "-a") do result in a
non-zero exit code.
- it would be quite unusual not to use the exit code for an error,
as otherwise the caller has no idea the command failed except by
scraping stderr
To keep our tests simple and portable, we can use the most obvious
error: asking to checkout a path which is not in the index at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If checkout-index is given --stage=all for a specific path, it will try
to write stages 1-3 (if present) for that path to temporary files.
However, if the file is present only at stage 0, it writes nothing but
gives a confusing message:
$ git checkout-index --stage=all -- Makefile
git checkout-index: Makefile does not exist at stage 4
This is nonsense. There is no stage 4 (it's just an internal enum value
we use for "all"), and the documentation clearly states:
Paths which only have a stage 0 entry will always be omitted from the
output.
Here it's talking about the list of tempfiles written to stdout, but it
seems clear that this case was not meant to be an error. We even have a
test which covers it, but it only checks that the command reports an
exit code of 0, not its stderr. And it reports 0 only because of another
bug which fails to propagate errors (which will be fixed in a subsequent
patch).
So let's make the test more thorough. We'll also cover the case that we
found _no_ entry, not even a stage zero, which should still be an error.
However, because of the other bug, we'll have to mark this as expecting
failure for the moment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
read_config();
check_config_and_arg_sanity();
save_config();
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber remote.NAME.url, and add another (usually
duplicate) remote.NAME.fetch entry (and other values, depending on
invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
For the --committer-date-is-author-date option of git-am and git-rebase,
we format the committer ident, then re-parse it to find the name and
email, and then feed those back to fmt_ident().
We can simplify this by handling it all at the time of the fmt_ident()
call. We pass in the appropriate getenv() results, and if they're not
present, then our WANT_COMMITTER_IDENT flag tells fmt_ident() to fill in
the appropriate value from the config. Which is exactly what
git_committer_ident() was doing under the hood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e8cbe2118a (am: stop exporting GIT_COMMITTER_DATE, 2020-08-17)
rewrote the code for setting the committer date to use fmt_ident(),
rather than setting an environment variable and letting commit_tree()
handle it. But it introduced two bugs:
- we use the author email string instead of the committer email
- when parsing the committer ident, we used the wrong variable to
compute the length of the email, resulting in it always being a
zero-length string
This commit fixes both, which causes our test of this option via the
rebase "apply" backend to now succeed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xpparam_t structures are usually zero-initialized before their specific
fields are assigned to, but there are three locations in the tree where
that does not happen. Add the missing memset() calls in order to make
initialization of xpparam_t structures consistent tree-wide and to
prevent stack garbage from being used as field values.
Signed-off-by: Michał Kępień <michal@isc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425 (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a5 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make `git credential fill` honour the core.askPass variable.
Signed-off-by: Thomas Koutcher <thomas.koutcher@online.fr>
[jk: added test]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--bisect-autostart` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function
`bisect_autostart()` is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--write-terms` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function `write_terms()`
is called from the C implementation of `set_terms()` and
`bisect_start()`.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--check-expected-revs` subcommand is no longer used from the
git-bisect.sh shell script. Functions `check_expected_revs` and
`is_expected_revs` are also deleted.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_state()` shell functions in C and also add a
subcommand `--bisect-state` to `git-bisect--helper` to call them from
git-bisect.sh .
Using `--bisect-state` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and will be called by some
other methods.
`bisect_head()` is only called from `bisect_state()`, thus it is not
required to introduce another subcommand.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--next-all` subcommand is no longer used from the git-bisect.sh
shell script. Instead the function `bisect_next_all()` is called from
the C implementation of `bisect_next()`.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--bisect-clean-state` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function
`bisect_clean_state()` is directly called from the C
implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the subcommand to `git bisect--helper` and call it from
git-bisect.sh.
With the conversion of `bisect_auto_next()` from shell to C in a
previous commit, `bisect_start()` can now be fully ported to C.
So let's complete the `--bisect-start` subcommand of
`git bisect--helper` so that it fully implements `bisect_start()`,
and let's use this subcommand in `git-bisect.sh` instead of
`bisect_start()`.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1bdca81641 (fast-import: add options for rewriting submodules,
2020-02-22) accidentally added two lines parsing the option
"rewrite-submodules-from". This didn't do anything in practice, because
they're in an if/else chain and so the second one can never trigger.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import stores its marks in a trie-like structure made of mark_set
structs. Each struct has a fixed size (1024). If our id number is too
large to fit in the struct, then we allocate a new struct which shifts
the id number by 10 bits. Our original struct becomes a child node
of this new layer, and the new struct becomes the top level of the trie.
This scheme was broken by ddddf8d7e2 (fast-import: permit reading
multiple marks files, 2020-02-22). Before then, we had a top-level
"marks" pointer, and the push-down worked by assigning the new top-level
struct to "marks". But after that commit, insert_mark() takes a pointer
to the mark_set, rather than using the global "marks". It continued to
assign to the global "marks" variable during the push down, which was
wrong for two reasons:
- we added a call in option_rewrite_submodules() which uses a separate
mark set; pushing down on "marks" is outright wrong here. We'd
corrupt the "marks" set, and we'd fail to correctly store any
submodule mappings with an id over 1024.
- the other callers passed "marks", but the push-down was still wrong.
In read_mark_file(), we take the pointer to the mark_set as a
parameter. So even though insert_mark() was updating the global
"marks", the local pointer we had in read_mark_file() was not
updated. As a result, we'd add a new level when needed, but then the
next call to insert_mark() wouldn't see it! It would then allocate a
new layer, which would also not be seen, and so on. Lookups for the
lost layers obviously wouldn't work, but before we even hit any
lookup stage, we'd generally run out of memory and die.
Our tests didn't notice either of these cases because they didn't have
enough marks to trigger the push-down behavior. The new tests in t9304
cover both cases (and fail without this patch).
We can solve the problem by having insert_mark() take a pointer-to-pointer
of the top-level of the set. Then our push down can assign to it in a
way that the caller actually sees. Note the subtle reordering in
option_rewrite_submodules(). Our call to read_mark_file() may modify our
top-level set pointer, so we have to wait until after it returns to
assign its value into the string_list.
Reported-by: Sergey Brester <serg.brester@sebres.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
deref_tag() can return NULL. Exit gracefully in that case instead
of blindly dereferencing the return value.
.name shouldn't ever be NULL, but grep_object() handles that case
explicitly, so let's be defensive here as well and show the broken
object's ID if it happens to lack a name after all.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" shows the absolute path to the working tree,
the commit that is checked out and the name of the branch. It is not
immediately obvious which of the worktrees, if any, are locked.
"git worktree remove" refuses to remove a locked worktree with
an error message. If "git worktree list" told which worktrees
are locked in its output, the user would not even attempt to
remove such a worktree, or would realize that
"git worktree remove -f -f <path>" is required.
Teach "git worktree list" to append "locked" to its output.
The output from the command becomes like so:
$ git worktree list
/path/to/main abc123 [master]
/path/to/worktree 456def (detached HEAD)
/path/to/locked-worktree 123abc (detached HEAD) locked
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
