Since [1] there has been no reason for keeping "git env--helper" a
built-in. The reason it was a built-in to begin with was to support
the GIT_TEST_GETTEXT_POISON mode removed in that commit. I.e. unlike
the rest of "test-tool" it would potentially be called by the
installed git via "git-sh-i18n.sh".
As none of that applies since [1] we should stop carrying this
technical debt, and move it to t/helper/*. As this mostly move-only
change shows this has the nice bonus that we'll stop wasting time
translating the internal-only strings it emits.
Even though this was a built-in, it was intentionally never
documented, see its introduction in [2]. It never saw use outside of
the test suite, except for the "GIT_TEST_GETTEXT_POISON" use-case
noted above.
1. d162b25f95 (tests: remove support for GIT_TEST_GETTEXT_POISON,
2021-01-20)
2. b4f207f339 (env--helper: new undocumented builtin wrapping
git_env_*(), 2019-06-21)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--super-prefix" option to "git" was initially added in [1] for
use with "ls-files"[2], and shortly thereafter "submodule--helper"[3]
and "grep"[4]. It wasn't until [5] that "read-tree" made use of it.
At the time [5] made sense, but since then we've made "ls-files"
recurse in-process in [6], "grep" in [7], and finally
"submodule--helper" in the preceding commits.
Let's also remove it from "read-tree", which allows us to remove the
option to "git" itself.
We can do this because the only remaining user of it is the submodule
API, which will now invoke "read-tree" with its new "--super-prefix"
option. It will only do so when the "submodule_move_head()" function
is called.
That "submodule_move_head()" function was then only invoked by
"read-tree" itself, but now rather than setting an environment
variable to pass "--super-prefix" between cmd_read_tree() we:
- Set a new "super_prefix" in "struct unpack_trees_options". The
"super_prefixed()" function in "unpack-trees.c" added in [5] will now
use this, rather than get_super_prefix() looking up the environment
variable we set earlier in the same process.
- Add the same field to the "struct checkout", which is only needed to
ferry the "super_prefix" in the "struct unpack_trees_options" all the
way down to the "entry.c" callers of "submodule_move_head()".
Those calls which used the super prefix all originated in
"cmd_read_tree()". The only other caller is the "unlink_entry()"
caller in "builtin/checkout.c", which now passes a "NULL".
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. e77aa336f1 (ls-files: optionally recurse into submodules, 2016-10-07)
3. 89c8626557 (submodule helper: support super prefix, 2016-12-08)
4. 0281e487fd (grep: optionally recurse into submodules, 2016-12-16)
5. 3d415425c7 (unpack-trees: support super-prefix option, 2017-01-17)
6. 188dce131f (ls-files: use repository object, 2017-06-22)
7. f9ee2fcdfa (grep: recurse in-process using 'struct repository', 2017-08-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper status" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git".
We need to convert both of these away from the global "--super-prefix"
at the same time, because "update" will call "clone", but "clone"
itself didn't make use of the global "--super-prefix" for displaying
paths. It was only on the list of sub-commands that accepted it
because "update"'s use of it would set it in its environment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--super-prefix" facility was introduced in [1] has always been a
transitory hack, which is why we've made it an error to supply it as
an option to "git" to commands that don't know about it.
That's been a good goal, as it has a global effect we haven't wanted
calls to get_super_prefix() from built-ins we didn't expect.
But it has meant that when we've had chains of different built-ins
using it all of the processes in that "chain" have needed to support
it, and worse processes that don't need it have needed to ask for
"SUPPORT_SUPER_PREFIX" because their parent process needs it.
That's how "fsmonitor--daemon" ended up with it, per [2] it's called
from (among other things) "submodule--helper absorbgitdirs", but as we
declared "submodule--helper" as "SUPPORT_SUPER_PREFIX" we needed to
declare "fsmonitor--daemon" as accepting it too, even though it
doesn't care about it.
But in the case of "absorbgitdirs" it only needed "--super-prefix" to
invoke itself recursively, and we'd never have another "in-between"
process in the chain. So we didn't need the bigger hammer of "git
--super-prefix", and the "setenv(GIT_SUPER_PREFIX_ENVIRONMENT, ...)"
that it entails.
Let's instead accept a hidden "--super-prefix" option to
"submodule--helper absorbgitdirs" itself.
Eventually (as with all other "--super-prefix" users) we'll want to
clean this code up so that this all happens in-process. I.e. needing
any variant of "--super-prefix" is itself a hack around our various
global state, and implicit reliance on "the_repository". This stepping
stone makes such an eventual change easier, as we'll need to deal with
less global state at that point.
The "fsmonitor--daemon" test adjusted here was added in [3]. To assert
that it didn't run into the "--super-prefix" message it was asserting
the output it didn't have. Let's instead assert the full output that
we *do* have, using the same pattern as a preceding change to
"t/t7412-submodule-absorbgitdirs.sh" used.
We could also remove the test entirely (as [4] did), but even though
the initial reason for having it is gone we're still getting some
marginal benefit from testing the "fsmonitor" and "submodule
absorbgitdirs" interaction, so let's keep it.
The change here to have either a NULL or non-"" string as a
"super_prefix" instead of the previous arrangement of "" or non-"" is
somewhat arbitrary. We could also decide to never have to check for
NULL.
As we'll be changing the rest of the "git --super-prefix" users to the
same pattern, leaving them all consistent makes sense. Why not pick ""
over NULL? Because that's how the "prefix" works[5], and having
"prefix" and "super_prefix" work the same way will be less
confusing. That "prefix" picked NULL instead of "" is itself
arbitrary, but as it's easy to make this small bit of our overall API
consistent, let's go with that.
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
3. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
4. https://lore.kernel.org/git/20221109004708.97668-5-chooglen@google.com/
5. 9725c8dda2 (built-ins: trust the "prefix" from run_builtin(),
2022-02-16)
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git bisect` becomes a builtin.
* dd/git-bisect-builtin:
bisect; remove unused "git-bisect.sh" and ".gitignore" entry
Turn `git bisect` into a full built-in
bisect--helper: log: allow arbitrary number of arguments
bisect--helper: handle states directly
bisect--helper: emit usage for "git bisect"
bisect test: test exit codes on bad usage
bisect--helper: identify as bisect when report error
bisect-run: verify_good: account for non-negative exit status
bisect run: keep some of the post-v2.30.0 output
bisect: fix output regressions in v2.30.0
bisect: refactor bisect_run() to match CodingGuidelines
bisect tests: test for v2.30.0 "bisect run" regressions
Preparation to remove git-submodule.sh and replace it with a builtin.
* ab/submodule-helper-prep-only:
submodule--helper: use OPT_SUBCOMMAND() API
submodule--helper: drop "update --prefix <pfx>" for "-C <pfx> update"
submodule--helper: remove --prefix from "absorbgitdirs"
submodule API & "absorbgitdirs": remove "----recursive" option
submodule.c: refactor recursive block out of absorb function
submodule tests: test for a "foreach" blind-spot
submodule--helper: fix a memory leak in "status"
submodule tests: add tests for top-level flag output
submodule--helper: move "config" to a test-tool
Now that the shell script hands off to the `bisect--helper` to do
_anything_ (except to show the help), it is but a tiny step to let the
helper implement the actual `git bisect` command instead.
This retires `git-bisect.sh`, concluding a multi-year journey that many
hands helped with, in particular Pranit Bauna, Tanushree Tumane and
Miriam Rubio.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Have the cmd_submodule__helper() use the OPT_SUBCOMMAND() API
introduced in fa83cc834d (parse-options: add support for parsing
subcommands, 2022-08-19).
This is only a marginal reduction in line count, but once we start
unifying this with a yet-to-be-added "builtin/submodule.c" it'll be
much easier to reason about those changes, as they'll both use
OPT_SUBCOMMAND().
We don't need to worry about "argv[0]" being NULL in the die() because
we'd have errored out in parse_options() as we're not using
"PARSE_OPT_SUBCOMMAND_OPTIONAL".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Build argument list and environment of child processes by using
struct child_process and populating its members "args" and "env"
directly instead of maintaining separate strvecs and letting
run_command_v_opt() and friends populate these members. This is
simpler, shorter and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Check for an error condition whose body unconditionally exists
first, and then perform the special casing of "version" and "help"
as part of the preparation for the "normal codepath". This makes
the code simpler to read.
Signed-off-by: Daniel Sonbolian <dsal3389@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the "subcommand" mode to parse-options API and update the
command line parser of Git commands with subcommands.
* sg/parse-options-subcommand: (23 commits)
remote: run "remote rm" argv through parse_options()
maintenance: add parse-options boilerplate for subcommands
pass subcommand "prefix" arguments to parse_options()
builtin/worktree.c: let parse-options parse subcommands
builtin/stash.c: let parse-options parse subcommands
builtin/sparse-checkout.c: let parse-options parse subcommands
builtin/remote.c: let parse-options parse subcommands
builtin/reflog.c: let parse-options parse subcommands
builtin/notes.c: let parse-options parse subcommands
builtin/multi-pack-index.c: let parse-options parse subcommands
builtin/hook.c: let parse-options parse subcommands
builtin/gc.c: let parse-options parse 'git maintenance's subcommands
builtin/commit-graph.c: let parse-options parse subcommands
builtin/bundle.c: let parse-options parse subcommands
parse-options: add support for parsing subcommands
parse-options: drop leading space from '--git-completion-helper' output
parse-options: clarify the limitations of PARSE_OPT_NODASH
parse-options: PARSE_OPT_KEEP_UNKNOWN only applies to --options
api-parse-options.txt: fix description of OPT_CMDMODE
t0040-parse-options: test parse_options() with various 'parse_opt_flags'
...
'git worktree' parses its subcommands with a long list of if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git maintenanze' parses its subcommands with a couple of if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
This change makes 'git maintenance' consistent with other commands in
that the help text shown for '-h' goes to standard output, not error,
in the exit code and error message on unknown subcommand, and the
error message on missing subcommand. There is a test checking these,
which is now updated accordingly.
Note that some of the functions implementing each subcommand don't
accept any parameters, so add the (unused) 'argc', '**argv' and
'*prefix' parameters to make them match the type expected by
parse-options, and thus avoid casting function pointers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our Bash completion script can complete --options for commands using
parse-options even when that command doesn't have a dedicated
completion function, but to do so the completion script must know
which commands use parse-options and which don't. Therefore, commands
not using parse-options are marked in 'git.c's command list with the
NO_PARSEOPT flag.
Update this list, and remove this flag from the commands that by now
use parse-options.
After this change we can TAB complete --options of the plumbing
commands 'commit-tree', 'mailinfo' and 'mktag'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a 'git diagnose' builtin to generate a standalone zip archive of
repository diagnostics.
The "diagnose" functionality was originally implemented for Scalar in
aa5c79a331 (scalar: implement `scalar diagnose`, 2022-05-28). However, the
diagnostics gathered are not specific to Scalar-cloned repositories and
can be useful when diagnosing issues in any Git repository.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let merge-tree accept a `--write-tree` parameter for choosing real
merges instead of trivial merges, and accept an optional
`--trivial-merge` option to get the traditional behavior. Note that
these accept different numbers of arguments, though, so these names
need not actually be used.
Note that real merges differ from trivial merges in that they handle:
- three way content merges
- recursive ancestor consolidation
- renames
- proper directory/file conflict handling
- etc.
Basically all the stuff you'd expect from `git merge`, just without
updating the index and working tree. The initial shell added here does
nothing more than die with "real merges are not yet implemented", but
that will be fixed in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
Create a test in t7527 to verify that we get a stray warning from
`git fsmonitor--daemon start` when indirectly called from
`git submodule absorbgitdirs`.
Update `git fsmonitor--daemon` to take (and ignore) the `--super-prefix`
argument to suppress the warning.
When we have:
1. a submodule with a `sub/.git/` directory (rather than a `sub/.git`
file).
2. `core.fsmonitor` is turned on in the submodule, but the daemon is
not yet started in the submodule.
3. and someone does a `git submodule absorbgitdirs` in the super.
Git will recursively invoke `git submodule--helper absorb-git-dirs`
in the submodule. This will read the index and may attempt to start
the fsmonitor--daemon with the `--super-prefix` argument.
`git fsmonitor--daemon start` does not accept the `--super-prefix`
argument and causes a warning to be issued.
This does not cause a problem because the `refresh_index()` code
assumes a trivial response if the daemon does not start.
The net-net is a harmelss, but stray warning. Lets eliminate the
warning.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behavior of "git -v" to be synonymous with "--version" /
"version", and "git -h" to be synonymous with "--help", but not "help".
These shorthands both display the "unknown option" message. Following
this change, "-v" displays the version, and "-h" displays the help text
of the "git" command.
It should be noted that the "-v" shorthand could be misinterpreted by
the user to mean "verbose" instead of "version", since some sub-commands
make use of it in this context. The top-level "git" command does not
have a "verbose" flag, so it's safe to introduce this shorthand
unambiguously.
Signed-off-by: Garrit Franke <garrit@slashdev.space>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a built-in file system monitoring daemon that can be used by
the existing `fsmonitor` feature (protocol API and index extension)
to improve the performance of various Git commands, such as `status`.
The `fsmonitor--daemon` feature builds upon the `Simple IPC` API and
provides an alternative to hook access to existing fsmonitors such
as `watchman`.
This commit merely adds the new command without any functionality.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2 (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fc (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a5136 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d8 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2 (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d8 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff and blame to work well with sparse index.
* ld/sparse-diff-blame:
blame: enable and test the sparse index
diff: enable and test the sparse index
diff: replace --staged with --cached in t1092 tests
repo-settings: prepare_repo_settings only in git repos
test-read-cache: set up repo after git directory
commit-graph: return if there is no git directory
git: ensure correct git directory setup with -h
Ensure correct git directory setup when -h is passed with commands. This
specifically applies to repos with special help text configuration
variables and to commands run with -h outside a repository. This
will also protect against test failures in the upcoming change to BUG in
prepare_repo_settings if no git directory exists.
Note: this diff is better seen when ignoring whitespace changes.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
It was only used by the `--preserve-merges` backend, which we just
removed.
Helped-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index command supports working with arbitrary object
directories via the `--object-dir` flag. Though this has historically
worked in arbitrary repositories (including when the command itself was
run outside of a Git repository), this has been somewhat of an accident.
For example, running:
git multi-pack-index write --object-dir=/path/to/repo/objects
outside of a Git repository causes a BUG(). This is because the
top-level `cmd_multi_pack_index()` function stops parsing when it sees
"write", and then fills in the default object directory (the result of
calling `get_object_directory()`) before handing off to
`cmd_multi_pack_index_write()`. But there is no repository to
initialize, and so calling `get_object_directory()` results in a BUG()
(indicating that the current repository is not initialized).
Another case where this doesn't quite work as expected is when operating
in a SHA-256 repository. To see the failure, try this in your shell:
git init --object-format=sha256 repo
git -C repo commit --allow-empty base
git -C repo repack -d
git multi-pack-index --object-dir=$(pwd)/repo/.git/objects write
and observe that we cannot open the `.idx` file in "repo", because the
outermost process assumes that any repository that it works in also uses
the default value of `the_hash_algo` (at the time of writing, SHA-1).
There may be compelling reasons for trying to work around these bugs,
but working in arbitrary `--object-dir`'s is non-standard enough (and
likewise, these bugs prevalent enough) that I don't think any workflows
would be broken by abandoning this behavior.
Accordingly, restrict the `multi-pack-index` builtin to only work when
inside of a Git repository (i.e., its main utility becomes selecting
which alternate to operate in), which avoids both of the bugs above.
(Note that you can still trigger a bug when writing a MIDX in an
alternate which does not use the same object format as the repository
which it is an alternate of, but that is an unrelated bug to this one).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git --config-env var=val cmd" weren't accepted (only
--config-env=var=val was).
* ps/config-env-option-with-separate-value:
git: support separate arg for `--config-env`'s value
git.txt: fix synopsis of `--config-env` missing the equals sign
The checkout machinery has been taught to perform the actual
write-out of the files in parallel when able.
* mt/parallel-checkout-part-2:
parallel-checkout: add design documentation
parallel-checkout: support progress displaying
parallel-checkout: add configuration options
parallel-checkout: make it truly parallel
unpack-trees: add basic support for parallel checkout
While not documented as such, many of the top-level options like
`--git-dir` and `--work-tree` support two syntaxes: they accept both an
equals sign between option and its value, and they do support option and
value as two separate arguments. The recently added `--config-env`
option only supports the syntax with an equals sign.
Mitigate this inconsistency by accepting both syntaxes and add tests to
verify both work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Streamline the codepath to fix the UTF-8 encoding issues in the
argv[] and the prefix on macOS.
* tb/precompose-prefix-simplify:
macOS: precompose startup_info->prefix
precompose_utf8: make precompose_string_if_needed() public
The "prefix" was precomposed for macOS in commit 5c327502 (MacOS:
precompose_argv_prefix(), 2021-02-03).
However, this commit forgot to update "startup_info->prefix" after
precomposing.
Move the (possible) precomposition towards the end of
setup_git_directory_gently(), so that precompose_string_if_needed()
can use git_config_get_bool("core.precomposeunicode") correctly.
Keep prefix, startup_info->prefix and GIT_PREFIX_ENVIRONMENT all in sync.
And as a result, the prefix no longer needs to be precomposed in git.c
Reported-by: Dmitry Torilov <d.torilov@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
* tb/precompose-prefix-too:
MacOS: precompose_argv_prefix()
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit,
76759c7dff "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com>
Helped-By: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
While it's already possible to pass runtime configuration via `git -c
<key>=<value>`, it may be undesirable to use when the value contains
sensitive information. E.g. if one wants to set `http.extraHeader` to
contain an authentication token, doing so via `-c` would trivially leak
those credentials via e.g. ps(1), which typically also shows command
arguments.
To enable this usecase without leaking credentials, this commit
introduces a new switch `--config-env=<key>=<envvar>`. Instead of
directly passing a value for the given key, it instead allows the user
to specify the name of an environment variable. The value of that
variable will then be used as value of the key.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the `--super-prefix` option was implmented in 74866d7579 (git: make
super-prefix option, 2016-10-07), its existence was only documented in
the manpage but not in the command's own usage string. Given that the
commit message didn't mention that this was done intentionally and given
that it's documented in the manpage, this seems like an oversight.
Add it to the usage string to fix the inconsistency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git maintenance run" and "git maintenance start/stop" commands
holds a file-based lock at the .git/maintenance.lock and
.git/schedule.lock respectively. These locks are used to ensure only
one maintenance process is executed at the time as both operations
involves writing data into the git repository.
The path to the lock file is built using
"the_repository->objects->odb->path" that results in SEGFAULT when we
have no repository available as "the_repository->objects->odb" is
set to NULL.
Let's teach maintenance command to use RUN_SETUP option that will
provide the validation and fail when running outside of a repository.
Hence fixing the SEGFAULT for all three operations and making the
behaviour consistent across all subcommands.
Setting the RUN_SETUP also provides the same protection for all
subcommands given that the "register" and "unregister" also requires to
be executed inside a repository.
Furthermore let's remove the local validation implemented by the
"register" and "unregister" as this will not be required anymore with
the new option.
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
When building with SKIP_DASHED_BUILT_INS=YesPlease, the built-in
commands are no longer present in the `PATH` as hardlinks to `git`.
As a consequence, `load_command_list()` needs to be taught to find the
names of the built-in commands from elsewhere.
This only affected the output of `git --list-cmds=main`, but not the
output of `git help -a` because the latter includes the built-in
commands by virtue of them being listed in command-list.txt.
The bug was detected via a patch series that turns the merge strategies
included in Git into built-in commands: `git merge -s help` relies on
`load_command_list()` to determine the list of available merge
strategies.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
It can be helpful to store a list of repositories in global or system
config and then iterate Git commands on that list. Create a new builtin
that makes this process simple for experts. We will use this builtin to
run scheduled maintenance on all configured repositories in a future
change.
The test is very simple, but does highlight that the "--" argument is
optional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
