"git diff -- ':(icase)makefile'" was unnecessarily rejected at the
command line parser.
* nd/magic-pathspec:
diff: restrict pathspec limitations to diff b/f case only
Its value is the same as the number of entries in the "names"
string_list, so just use "names.nr" in its place.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 98e2092 taught cat-file to stream blobs with --batch,
which requires that we look up the object type before
loading it into memory. As a result, we now print the
object header from information in sha1_object_info, and the
actual contents from the read_sha1_file. We double-check
that the information we printed in the header matches the
content we are about to show.
Later, commit 93d2a60 allowed custom header lines for
--batch, and commit 5b08640 made type lookups optional. As a
result, specifying a header line without the type or size
means that we will not look up those items at all.
This causes our double-checking to erroneously die with an
error; we think the type or size has changed, when in fact
it was simply left at "0".
For the size, we can fix this by only doing the consistency
double-check when we have retrieved the size via
sha1_object_info. In the case that we have not retrieved the
value, that means we also did not print it, so there is
nothing for us to check that we are consistent with.
We could do the same for the type. However, besides our
consistency check, we also care about the type in deciding
whether to stream or not. So instead of handling the case
where we do not know the type, this patch instead makes sure
that we always trigger a type lookup when we are printing,
so that even a format without the type will stream as we
would in the normal case.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently individually pass the sha1, type, and size
fields calculated by sha1_object_info. However, if we pass
the whole struct, the called function can make more
intelligent decisions about which fields were actually
filled by sha1_object_info.
This patch takes that first refactoring step, passing the
whole struct, so further patches can make those decisions
with less noise in their diffs. There should be no
functional change to this patch (aside from a minor typo fix
in the error message).
As a side effect, we can rename the local variables in the
function to "type" and "size", since the names are no longer
taken.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use only one return point from git_connect(), doing the
free();
return conn;
only at one place in the code.
There may be a little confusion what the variable "host" is for. At
some places it is only the host part, at other places it may include
the port number, so change host into hostandport here.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the function is_local() in transport.c public, rename it into
url_is_local_not_ssh() and use it in both transport.c and connect.c
Use a protocol "local" for URLs for the local file system.
One note about using file:// under Windows:
The (absolute) path on Unix like system typically starts with "/".
When the host is empty, it can be omitted, so that a shell scriptlet
url=file://$pwd
will give a URL like "file:///home/user/repo".
Windows does not have the same concept of a root directory located in "/".
When parsing the URL allow "file://C:/user/repo"
(even if RFC1738 indicates that "file:///C:/user/repo" should be used).
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use get_host_and_port() even for ssh.
Remove the variable port git_connect(), and simplify parse_connect_url()
Use only one return point in git_connect(), doing the free() and return conn.
t5601 had 2 corner test cases which now pass.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation (in urls.txt) says that
"ssh://host:/~repo",
"host:/~repo" or
"host:~repo"
specify the repository "repo" in the home directory at "host".
This has not been working for "host:/~repo".
Before commit 356bec "Support [address] in URLs", the comparison
"url != hostname" could be used to determine if the URL had a scheme
or not: "ssh://host/host" != "host".
However, after 356bec "[::1]" was converted into "::1", yielding
url != hostname as well. To fix this regression, don't use
"if (url != hostname)", but look at the separator instead.
Rename the variable "c" into "separator" to make it easier to read.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases using git fetch-pack --diag-url:
- parse out host and path for URLs with a scheme (git:// file:// ssh://)
- parse host names embedded by [] correctly
- extract the port number, if present
- separate URLs like "file" (which are local)
from URLs like "host:repo" which should use ssh
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main purpose is to trace the URL parser called by git_connect() in
connect.c
The main features of the parser can be listed as this:
- parse out host and path for URLs with a scheme (git:// file:// ssh://)
- parse host names embedded by [] correctly
- extract the port number, if present
- separate URLs like "file" (which are local)
from URLs like "host:repo" which should use ssh
Add the new parameter "--diag-url" to "git fetch-pack", which prints
the value for protocol, host and path to stderr and exits.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_connect has grown large due to the many different protocols syntaxes
that are supported. Move the part of the function that parses the URL to
connect to into a separate function for readability.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since day one, function git_connect() had a limit on the command line of
the command that is invoked to make a connection. 7a33bcbe converted the
code that constructs the command to strbuf. This would have been the
right time to remove the limit, but it did not happen. Remove it now.
git_connect() uses start_command() to invoke the command; consequently,
the limits of the system still apply, but are diagnosed only at execve()
time. But these limits are more lenient than the 1K that git_connect()
imposed.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rev-parse looks at whether an argument like "foo..bar" or
"foobar^@" is a difference or parent-shorthand, it internally
munges the arguments so that it can pass the individual rev
arguments to get_sha1(). However, we do not consistently un-munge
the result.
For cases where we do not match (e.g., "doesnotexist..HEAD"), we
would then want to try to treat the argument as a filename.
try_difference gets() this right, and always unmunges in this case.
However, try_parent_shorthand() never unmunges, leading to incorrect
error messages, or even incorrect results:
$ git rev-parse foobar^@
foobar
fatal: ambiguous argument 'foobar': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
$ >foobar
$ git rev-parse foobar^@
foobar
For cases where we do match, neither function unmunges. This does
not currently matter, since we are done with the argument. However,
a future patch will do further processing, and this prepares for
it. In addition, it's simply a confusing interface for some cases to
modify the const argument, and others not to.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rev-parse understands that a "--" may separate revisions and
filenames, and that anything after the "--" is taken as-is.
However, it does not understand that anything before the
token must be a revision (which is the usual rule
implemented by the setup_revisions parser).
Since rev-parse prefers revisions to files when parsing
before the "--", we end up with the correct result (if such
an argument is a revision, we parse it as one, and if it is
not, it is an error either way). However, we misdiagnose
the errors:
$ git rev-parse foobar -- >/dev/null
fatal: ambiguous argument 'foobar': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
$ >foobar
$ git rev-parse foobar -- >/dev/null
fatal: bad flag '--' used after filename
In both cases, we should know that the real error is that
"foobar" is meant to be a revision, but could not be
resolved.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of simply ignoring the value passed to --depth option when
it is zero or negative, catch and report it as an error to let
people know that they were using the option incorrectly.
Original-patch-by: Andrés G. Aragoneses <knocte@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the '-v' option of "git commit" the diff added to the commit
message temporarily for editing is stripped off after the user exited the
editor by searching for "\ndiff --git " and truncating the commmit message
there if it is found.
But this approach has two problems:
- when the commit message itself contains a line starting with
"diff --git" it will be truncated there prematurely; and
- when the "diff.submodule" setting is set to "log", the diff may
start with "Submodule <hash1>..<hash2>", which will be left in
the commit message while it shouldn't.
Fix that by introducing a special scissor separator line starting with the
comment character ('#' or the core.commentChar config if set) followed by
two lines describing what it is for. The scissor line - which will not be
translated - is used to reliably detect the start of the diff so it can be
chopped off from the commit message, no matter what the user enters there.
Turn a known test failure fixed by this change into a successful test;
also add one for a diff starting with a submodule log and another one for
proper handling of the comment char.
Reported-by: Ari Pollak <ari@debian.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more tests testing all the combinations:
-IPv4 or IPv6
-path starting with "/" or with "/~"
-with and without the ssh:// scheme
Some tests fail; they need updates in connect.c
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 8d3d28f5 added test cases for URLs which should be ssh.
Remove the function clear_ssh, use test_when_finished to clean up.
Introduce the function setup_ssh_wrapper, which could be factored
out together with expect_ssh.
Tighten one test and use "foo:bar" instead of "./foo:bar",
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git used to trim the trailing slash, and make the command equivalent
to 'git mv file no-such-dir', which created the file no-such-dir
(while the trailing slash explicitly stated that it could only be a
directory).
This patch skips the trailing slash removal for the destination
path. The path with its trailing slash is passed to rename(2),
which errors out with the appropriate message:
$ git mv file no-such-dir/
fatal: renaming 'file' failed: Not a directory
Original-patch-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --smtp-encryption=ssl, we use a Net::SMTP::SSL connection,
passing its ->new all the options that would otherwise go to
Net::SMTP->new (most options) and IO::Socket::SSL->start_SSL (for the
SSL options).
However, while Net::SMTP::SSL replaces the underlying socket class
with an SSL socket, it does nothing to allow passing options to that
socket. So the SSL-relevant options are lost.
Fortunately there is an escape hatch: we can directly set the options
with IO::Socket::SSL::set_client_defaults. They will then persist
within the IO::Socket::SSL module.
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
35035bb (send-email: be explicit with SSL certificate verification,
2013-07-18) forgot to specify that --smtp-ssl-cert-path takes a string
argument. This means that the option could not actually be used as
intended. Presumably noone noticed because it's much easier to set it
through configs anyway.
Add the required "=s".
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to pass the Debug option through to Net::SMTP::SSL->new --
which is the same as Net::SMTP->new. This meant that with security
set to SSL, we would never enable debug output.
Pass through the flag.
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage sample of add_submodule_odb() function in the Submodules
section expects non-zero return value for success, but the function
actually reports success with zero.
Helped-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Nick Townsend <nick.townsend@mac.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submodule.$name.update is given as hint from the upstream in
the .gitmodules file, we used to blindly copy it to .git/config,
unless there already is a value defined for the submodule.
However, there is no reason to expect that the update mode hinted by
the upstream is available in the version of Git the user is using,
and a really custom "!cmd" prepared by an upstream person running on
Linux may not even be available to a user on Windows. It is simply
irresponsible to copy the setting blindly and to attempt to use it
during a later "submodule update" without validating it first.
Just show the suggested value to the diagnostic output, and set the
value to 'none' in the configuration, if it is not one of the ones
that are known to be supported by this version of Git.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cherry(1)'s "description" section has never really managed
to explain to me what the command does. It contains too much
explanation of the algorithm instead of simply saying what
goals it achieves, and too much terminology that we otherwise
do not use (fork-point instead of merge-base).
Try a much more concise approach: state what it finds out, why
this is neat, and how the output is formatted, in a few short
paragraphs. In return, provide much longer examples of how it
fits into a "format-patch | am" based workflow, and how it
compares to reading the same from git-log.
Also carefully avoid using "merge" in a context where it does
not mean something that comes from git-merge(1). Instead, say
"apply" in an attempt to further link to patch workflow
concepts.
While there, also omit the language about _which_ upstream
branch we treat as the default. I literally just learned that
we support having several, so let's not confuse new users
here, especially considering that git-config(1) does not
document this.
Prompted-by: a.huemer@commend.com on #git
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal mercurial API expects ordinary 8-bit string objects, not
Unicode string objects. With this change, the test-hg.sh unit tests
pass again.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unbreaks a recent breakage due to use of unquote-c-style.
This may need to be cherry-picked down to 1.8.4.x series.
* 'rh/remote-hg-bzr-updates' (early part):
remote-hg: don't decode UTF-8 paths into Unicode objects
"**" means bold in ASCIIDOC, so we need to escape it. This is similar
to 8447dc8 (gitignore.txt: fix documentation of "**" patterns -
2013-11-07)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace double quotes around literal examples with backticks
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin_diff_b_f() needs a path, not pathspec. Other modes in diff
can deal with pathspec just fine. But because of the current
GUARD_PATHSPEC() location, other modes also reject :(glob) and
:(icase).
Move GUARD_PATHSPEC(), and the "path" assignment statement, which is
the reason of this GUARD_PATHSPEC(), inside builtin_diff_b_f().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal mercurial API expects ordinary 8-bit string objects, not
Unicode string objects. With this change, the test-hg.sh unit tests
pass again.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various fixes:
- fix typos (e.g. "show" -> "shown")
- use "regular expression(s)" instead of "regexp" where appropriate
- reword some sentences for easier reading
- fix/improve some grammatical issues (e.g. comma usage)
- add missing articles (e.g. "the")
- change "E-mail" to "email"
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some the labeled list entries have a blank line between the label
and the body text, and some don't. Use the latter style for
consistency; incidentally, syntax highlighting in Vim works better
if there is no blank line there.
Typeset literal options, commands, and path names in monospace.
When using `literal string` mark-up to do so, there is no need to
escape AsciiDoc special characters with backslashes, so make sure we
don't do so.
Replace some double quotes with proper AsciiDoc quotes
(e.g. ``foo'').
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The man pages contain inconsistent usage of backticks vs. single quotes
around options, commands, etc. that are in paragraphs. This commit states
that backticks should always be used around literal examples.
This commit states that "--" and friends should not be escaped
(e.g. use `--pretty=oneline` instead of `\--pretty=oneline`).
This commit also states correct usage for typesetting command usage
examples with inline substitutions.
Thanks-to: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Stuart Rackham <srackham@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for recent regression while talking to upload-pack
in a repository with many symbolic refs.
* maint:
Revert "upload-pack: send non-HEAD symbolic refs"
Commit f2e0873 (branch: report invalid tracking branch as gone) removed
an early return from fill_tracking_info() in the path taken when 'git
branch -v' lists a branch in sync with its upstream. This resulted in an
unconditionally added space in front of the subject line:
$ git branch -v
* master f5eb3da commit pushed to upstream
topic f935eb6 unpublished topic
Instead, only add the trailing space if a decoration have been added.
To catch this kind of whitespace breakage in the tests, be a bit less
smart when filtering the output through sed.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 5e7dcad771cb873e278a0571b46910d7c32e2f6c; there
may be unbounded number of symbolic refs in the repository, but the
capability header line in the on-wire protocol has a rather low
length limit.
