When the chmod option was added to git add, it was hooked up to the diff
machinery, meaning that it only works when the version in the index
differs from the version on disk.
As the option was supposed to mirror the chmod option in update-index,
which always changes the mode in the index, regardless of the status of
the file, make sure the option behaves the same way in git add.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there is no test checking the expected behaviour when multiple
chmod flags with different arguments are passed. As argument handling
is not in line with other git commands it's easy to miss and
accidentally change the current behaviour.
While there, fix the argument type of chmod_path, which takes an int,
but had a char passed in.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The case statement to check the file mode of a staged file appears
a number of times.
Simplify the test by utilizing a test_mode_in_index helper function.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the underlying platform a chmod may be a noop. Although it
wouldn't harm the result of the '--chmod=-x' test, there is a more
robust way to make sure the --chmod option works both ways.
Merge the two separate tests for the --chmod option into one, checking
both permissions on the same file.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an earlier test that has prerequisite is skipped, files
used by later tests may be left in the working tree in an
unexpected state. For example, a test runs this sequence:
echo foo >xfoo1 && chmod 755 xfoo1
to create an executable file xfoo1, expecting that xfoo1
does not exist before it runs in the test sequence.
However, the absence of this file depends on "git reset
--hard" done in an earlier test, that is skipped when SANITY
prerequisite is not met, and worse yet, xfoo1 originally is
created as a symbolic link, which means the chmod does not
affect the modes of xfoo1 as this test expects.
Fix this by starting the test with "rm -f xfoo1" to make
sure the file is created from scratch, and do the same to
other similar tests.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The executable bit will not be detected (and therefore will not be
set) for paths in a repository with `core.filemode` set to false,
though the users may still wish to add files as executable for
compatibility with other users who _do_ have `core.filemode`
functionality. For example, Windows users adding shell scripts may
wish to add them as executable for compatibility with users on
non-Windows.
Although this can be done with a plumbing command
(`git update-index --add --chmod=+x foo`), teaching the `git-add`
command allows users to set a file executable with a command that
they're already familiar with.
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test updates to make it more readable and maintainable.
* es/t1500-modernize:
t1500: avoid setting environment variables outside of tests
t1500: avoid setting configuration options outside of tests
t1500: avoid changing working directory outside of tests
t1500: test_rev_parse: facilitate future test enhancements
t1500: be considerate to future potential tests
"git fast-import --export-marks" would overwrite the existing marks
file even when it makes a dump from its custom die routine.
Prevent it from doing so when we have an import-marks file but
haven't finished reading it.
* fc/fast-import-broken-marks-file:
fast-import: do not truncate exported marks file
test_patch_id_file_order shell function uses $name variable to hold
one filename, and calls another shell function calc_patch_id as a
downstream of one pipeline. The called function, however, also uses
the same $name variable. With a shell implementation that runs the
callee in the current shell environment, the caller's $name would
be clobbered by the callee's use of the same variable.
This hasn't been an issue with dash and bash. ksh93 reveals the
breakage in the test script.
Fix it by using a distinct variable name in the callee.
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9xxx series has been updated primarily for readability, while
fixing small bugs in it. A few scripted Porcelains have also been
updated to fix possible bugs around their use of "test -z" and
"test -n".
* jk/test-z-n-unquoted:
always quote shell arguments to test -z/-n
t9103: modernize test style
t9107: switch inverted single/double quotes in test
t9107: use "return 1" instead of "exit 1"
t9100,t3419: enclose all test code in single-quotes
t/lib-git-svn: drop $remote_git_svn and $git_svn_id
Many commands normalize command line arguments from NFD to NFC
variant of UTF-8 on OSX, but commands in the "diff" family did
not, causing "git diff $path" to complain that no such path is
known to Git. They have been taught to do the normalization.
* ar/diff-args-osx-precompose:
diff: run arguments through precompose_argv
Add perf test for "rebase -i"
* js/perf-rebase-i:
perf: run "rebase -i" under perf
perf: make the tests work in worktrees
perf: let's disable symlinks when they are not available
t0040 had too many unnecessary repetitions in its test data. Teach
test-parse-options program so that a caller can tell what it
expects in its output, so that these repetitions can be cleaned up.
* jc/test-parse-options-expect:
t0040: convert a few tests to use test-parse-options --expect
t0040: remove unused test helpers
test-parse-options: --expect=<string> option to simplify tests
test-parse-options: fix output when callback option fails
"git commit" learned to pay attention to "commit.verbose"
configuration variable and act as if "--verbose" option was
given from the command line.
* pb/commit-verbose-config:
commit: add a commit.verbose config variable
t7507-commit-verbose: improve test coverage by testing number of diffs
parse-options.c: make OPTION_COUNTUP respect "unspecified" values
t/t7507: improve test coverage
t0040-parse-options: improve test coverage
test-parse-options: print quiet as integer
t0040-test-parse-options.sh: fix style issues
"git format-patch" learned a new "--base" option to record what
(public, well-known) commit the original series was built on in
its output.
* xy/format-patch-base:
format-patch: introduce format.useAutoBase configuration
format-patch: introduce --base=auto option
format-patch: add '--base' option to record base tree info
patch-ids: make commit_patch_id() a public helper function
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
"git commit --dry-run" reported "No, no, you cannot commit." in one
case where "git commit" would have allowed you to commit, and this
improves it a little bit ("git commit --dry-run --short" still does
not give you the correct answer, for example). This is a stop-gap
measure in that "commit --short --dry-run" still gives an incorrect
result.
* ss/commit-dry-run-resolve-merge-to-no-op:
wt-status.c: set commitable bit if there is a meaningful merge.
In t0008, we have
cat <<-EOF
...
a/b/.gitignore:8:!on* "a/b/one\"three"
...
EOF
and expect that the backslash-dq is passed through literally.
ksh88 eats the backslash and produces a wrong expect file to
compare the actual output with.
Using \\" works this around without breaking other POSIX shells
(which collapse backslash-backslash to a single backslash), and
ksh88 does so, too.
It makes it easier to read, too, because the reason why we are
writing backslash there is *not* because we think dq is special and
want to quote it (if that were the case we would have two more
backslashes on that line). It is simply because we want a single
literal backslash there. Since backslash is treated specially in
unquoted here-document, explicitly doubling it to quote it expresses
our intent better than relying on the character that immediately
comes after it (i.e. '"') not being a special character.
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, each test should be responsible for setting up state it needs
rather than relying upon transient global state. Toward this end, teach
test_rev_parse() to accept a "-g <dir>" option to allow callers to
specify the value of the GIT_DIR environment variable explicitly. Take
advantage of this new option to avoid polluting the global scope with
GIT_DIR assignments.
Implementation note: Typically, tests avoid polluting the global state
by wrapping transient environment variable assignments within a
subshell, however, this technique doesn't work here since test_config()
and test_unconfig() need to know GIT_DIR, as well, but neither function
can be used within a subshell. Consequently, GIT_DIR is instead cleared
manually via test_when_finished().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, each test should be responsible for setting up state it needs
rather than relying upon transient global state. Toward this end, teach
test_rev_parse() to accept a "-b <value>" option to allow callers to set
"core.bare" explicitly or undefine it. Take advantage of this new option
to avoid setting "core.bare" outside of tests.
Under the hood, "-b <value>" invokes "test_config -C <dir>" (or
"test_unconfig -C <dir>"), thus git-config knows explicitly where to
find its configuration file. Consequently, the global GIT_CONFIG
environment variable required by the manual git-config invocations
outside of tests is no longer needed, and is thus dropped.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, each test should be responsible for setting up state it needs
rather than relying upon transient global state. Toward this end, teach
test_rev_parse() to accept a "-C <dir>" option to allow callers to
instruct it explicitly in which directory its tests should be run. Take
advantage of this new option to avoid changing the working directory
outside of tests.
Implementation note: test_rev_parse() passes "-C <dir>" along to
git-rev-parse with <dir> properly quoted. The natural and POSIX way to
do so is via ${dir:+-C "$dir"}, however, with some older broken shells,
this expression evaluates incorrectly to a single argument ("-C <dir>")
rather than the expected two (-C and "<dir>"). Work around this problem
with the slightly ungainly expression: ${dir:+-C} ${dir:+"$dir"}
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests run by test_rev_parse() are nearly identical; each invokes
git-rev-parse with a single option and compares the result against an
expected value. Such duplication makes it onerous to extend the tests
since any change needs to be repeated in each test. Avoid the
duplication by parameterizing the test and driving it via a for-loop.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain lines of the marks file might be corrupted (or the objects
missing due to a garbage collection), but that's no reason to truncate
the file and essentially destroy the rest of it.
Ideally missing objects should not cause a crash, we could just skip
them, but that's another patch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
Running tests with '-x' option to trace the individual command
executions is a useful way to debug test scripts, but some tests
that capture the standard error stream and check what the command
said can be broken with the trace output mixed in. When running
our tests under "bash", however, we can redirect the trace output
to another file descriptor to keep the standard error of programs
being tested intact.
* jk/test-send-sh-x-trace-elsewhere:
test-lib: set BASH_XTRACEFD automatically
Update tests for "http.extraHeaders=<header>" to be portable back
to Apache 2.2 (the original depended on <RequireAll/> which is a
more recent feature).
* js/http-custom-headers:
submodule: ensure that -c http.extraheader is heeded
t5551: make the test for extra HTTP headers more robust
tests: adjust the configuration for Apache 2.2
"git fsck" learned to catch NUL byte in a commit object as
potential error and warn.
* jc/fsck-nul-in-commit:
fsck: detect and warn a commit with embedded NUL
fsck_commit_buffer(): do not special case the last validation
"git rerere" can get confused by conflict markers deliberately left
by the inner merge step, because they are indistinguishable from
the real conflict markers left by the outermost merge which are
what the end user and "rerere" need to look at. This was fixed by
making the conflict markers left by the inner merges a bit longer.
* jc/ll-merge-internal:
t6036: remove pointless test that expects failure
ll-merge: use a longer conflict marker for internal merge
ll-merge: fix typo in comment
An earlier addition of "sanitize_submodule_env" with 14111fc4 (git:
submodule honor -c credential.* from command line, 2016-02-29)
turned out to be a convoluted no-op; implement what it wanted to do
correctly, and stop filtering settings given via "git -c var=val".
* jk/submodule-c-credential:
submodule: stop sanitizing config options
submodule: use prepare_submodule_repo_env consistently
submodule--helper: move config-sanitizing to submodule.c
submodule: export sanitized GIT_CONFIG_PARAMETERS
t5550: break submodule config test into multiple sub-tests
t5550: fix typo in $HTTPD_URL
Mark several messages for translation.
* va/i18n-misc-updates:
i18n: unpack-trees: avoid substituting only a verb in sentences
i18n: builtin/pull.c: split strings marked for translation
i18n: builtin/pull.c: mark placeholders for translation
i18n: git-parse-remote.sh: mark strings for translation
i18n: branch: move comment for translators
i18n: branch: unmark string for translation
i18n: builtin/rm.c: remove a comma ',' from string
i18n: unpack-trees: mark strings for translation
i18n: builtin/branch.c: mark option for translation
i18n: index-pack: use plural string instead of normal one
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
Update of "git submodule" to move pieces of logic to C continues.
* sb/submodule-init:
submodule init: redirect stdout to stderr
submodule--helper update-clone: abort gracefully on missing .gitmodules
submodule init: fail gracefully with a missing .gitmodules file
submodule: port init from shell to C
submodule: port resolve_relative_url from shell to C
The final batch of git-rev-parse tests work against a non-local object
database named repo.git. This is done by renaming .git to repo.git and
pointing GIT_DIR at it, but the name is never restored to .git at the
end of the script, which can be problematic for tests added in the
future. Be more friendly by instead making repo.git a copy of .git.
Furthermore, make it clear that tests in repo.git will be independent
from the results of earlier tests done in .git by initializing repo.git
earlier in the test sequence.
Likewise, bundle remaining preparation (such as directory creation) into
a common setup test consistent with modern practice.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When files are unmerged they can show up as both unmerged and
modified in the output of `git diff --raw`. This causes
difftool's dir-diff to create filesystem entries for the same
path twice, which fails when it encounters a duplicate path.
Ensure that each worktree path is only processed once.
Add a test to demonstrate the breakage.
Reported-by: Jan Smets <jan@smets.cx>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In shell code like:
test -z $foo
test -n $foo
that does not quote its arguments, it's easy to think that
it is actually looking at the contents of $foo in each case.
But if $foo is empty, then "test" does not see any argument
at all! The results are quite subtle.
POSIX specifies that test's behavior depends on the number
of arguments it sees, and if $foo is empty, it sees only
one. The behavior in this case is:
1 argument: Exit true (0) if $1 is not null; otherwise,
exit false.
So in the "-z $foo" case, if $foo is empty, then we check
that "-z" is non-null, and it returns success. Which happens
to match what we expected. But for "-n $foo", if $foo is
empty, we'll see that "-n" is non-null and still return
success. That's the opposite of what we intended!
Furthermore, if $foo contains whitespace, we'll end up with
more than 2 arguments. The results in this case are
generally unspecified (unless the first part of $foo happens
to be a valid binary operator, in which case the results are
specified but certainly not what we intended).
And on top of this, even though "test -z $foo" _should_ work
for the empty case, some older shells (reportedly ksh88)
complain about the missing argument.
So let's make sure we consistently quote our variable
arguments to "test". After this patch, the results of:
git grep 'test -[zn] [^"]'
are empty.
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main goal here was to avoid double-quotes for
surrounding the test snippet, since it makes the code hard
to read (and to grep for common problems).
But while we're here, we can fix a few other things:
- use test_path_* helpers, which are more robust and give
better error messages
- only "cd" inside a subshell, which leaves the
environment pristine if further tests are added
- consistently quote shell arguments. These aren't wrong
if we assume find-rev output doesn't have any
whitespace, but it doesn't hurt to be careful.
- replace the old-style 'test x$foo = x' with 'test -z
"$foo"'. Besides the quoting fix, this is the form we
generally use in our test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the test snippets in t9107 is enclosed in double
quotes, but then uses single quotes to surround an
interpolated variable inside the snippet, like:
test_expect_success '...' "
test -n '$head'
"
This happens to work because the variable is interpolated
_before_ the snippet is run, and the result is eval'd. So as
long as the variable does not contain any single quotes, the
two are equivalent. And it doesn't, as we know it is a sha1
from rev-parse above. But this construct is unnecessarily
confusing.
But we can go a step further in cleaning up. The test is
really checking that a particular ref has a value. Rather
than checking if rev-parse produced output, we can just move
rev-parse into the test itself, and rely on the exit code
from --verify. Nobody else cares about the $head variable at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
