Earlier f98fd43 (git-log.txt,rev-list-options.txt: put option blocks in
proper order, 2011-03-08) moved the text around in the documentation for
options in the rev-list family of commands such as "log". Consequently,
the description of the --cherry-pick option appears way above the
description of the --left-right option now.
But the description of the --cherry-pick option still refers to the
example for the --left-right option, like this:
... with --left-right, like the example ABOVE in the description of
that option.
Rephrase it to clarify that we are making a forward reference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_INDEX_FILE variable we get from git has the full
path to the repo, which may contain spaces. When we use it
in our shell snippet, it needs to be quoted.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a merge module_list returns conflicting submodules several times
(stage 1,2,3) which caused the submodules to be used multiple times in
git submodule init, sync, update and status command.
There are 5 callers of module_list; they all read (mode, sha1, stage,
path) tuple, and most of them care only about path. As a first level
approximation, it should be Ok (in the sense that it does not make things
worse than it currently is) to filter the duplicate paths from module_list
output, but some callers should change their behaviour when the merge in
the superproject still has conflicts.
Notice the higher-stage entries, and emit only one record from
module_list, but while doing so, mark the entry with "U" (not [0-3]) in
the $stage field and null out the SHA-1 part, as the object name for the
lowest stage does not give any useful information to the caller, and this
way any caller that uses the object name would hopefully barf. Then
update the codepaths for each subcommands this way:
- "update" should not touch the submodule repository, because we do not
know what commit should be checked out yet.
- "status" reports the conflicting submodules as 'U000...000' and does
not recurse into them (we might later want to make it recurse).
- The command called by "foreach" may want to do whatever it wants to do
by noticing the merged status in the superproject itself, so feed the
path to it from module_list as before, but only once per submodule.
- "init" and "sync" are unlikely things to do while the superproject is
still not merged, but as long as a submodule is there in $path, there
is no point skipping it. It might however want to take the merged
status of .gitmodules into account, but that is outside of the scope of
this topic.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script does not have to be run under bash, but any POSIX compliant
shell would do, as it does not use any bash-isms.
It may be written under a different style than what is recommended in
Documentation/CodingGuidelines, but that is a different matter.
While at it, fix obvious typos in the comment.
Signed-off-by: Maxin B. John <maxin@maxinbjohn.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid running the command being tested as an upstream of a pipe;
doing so will lose its exit status.
While at it, modernise the style of the script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the order to 1/0 to have the same true/false order as the rest
of the possibilities for a boolean variable in order not not confuse
users.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the created test repositories will be affected by users ~/.gitconfig.
For example, setting core.logAllrefupdates in users config will make all
calls to "git config --unset core.logAllrefupdates" fail which will break
the first test which uses the statement and expects it to succeed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... with help from Eric Raible.
In addition, describe the use of GIT_COMMITTER_DATE more comprehensively
by including "date-formats.txt"
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a synonym for the existing '-n' option, matching GNU grep.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fractional timezones, like -0330 (NST used in Canada) or +0430
(Afghanistan, Iran DST), were not handled properly in parse_date; this
means values such as 'minute_local' and 'iso-tz' were not generated
correctly.
This was caused by two mistakes:
* sign of timezone was applied only to hour part of offset, and not
as it should be also to minutes part (this affected only negative
fractional timezones).
* 'int $h + $m/60' is 'int($h + $m/60)' and not 'int($h) + $m/60',
so fractional part was discarded altogether ($h is hours, $m is
minutes, which is always less than 60).
Note that positive fractional timezones +0430, +0530 and +1030 can be
found as authortime in git.git repository itself.
For example http://repo.or.cz/w/git.git/commit/88d50e7 had authortime
of "Fri, 8 Jan 2010 18:48:07 +0000 (23:48 +0530)", which is not marked
with 'atnight', when "git show 88d50e7" gives correct author date of
"Sat Jan 9 00:18:07 2010 +0530".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Clarify "string of unsigned bytes";
* Blob has two variants (regular file vs symlink), not (blob vs symlink);
* Clarify permission mode bits;
* Clarify ce_namelen() "too long to fit in the length field" case;
* Clarify "." etc are forbidden as path components;
* Match the description with the internal wording "cache-tree";
* All types of extension begin with signature and length as explained in
the first part. Don't repeat the "length" part in the description of
each extension (can be mistaken as if there is a separate 32-bit size
field inside the extension), but state what the signature for each
extension is.
* Don't say "Extension tag", as we have said "Extension signature" in the
first part---be consistent;
* Clarify the invalidation of cache-tree entries;
* Correct description on subtree_nr field in the cache-tree;
* Clarify the order of entries in cache-tree;
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git am --abort' is around for quite a long time now, and users should
normally not poke around inside the .git directory, yet the
documentation of 'git am' still recommends the following:
... if you decide to start over from scratch,
run `rm -f -r .git/rebase-apply` ...
Suggest 'git am --abort' instead.
It's not quite the same as the original, because 'git am --abort' will
restore the original branch, while simply removing '.git/rebase-apply'
won't, but that's rather a thinko in the original wording, because
that won't actually "start over _from scratch_".
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditional "opportunistic index update" done by read-only "diff" and
"status" was about updating cached lstat(2) information in the index for
the next round. We missed another obvious optimization opportunity: when
there are racily clean entries that will cease to be racily clean by
updating $GIT_INDEX_FILE. Detect that case and write $GIT_INDEX_FILE out
to give it a newer timestamp.
Noticed by Lasse Makholm by stracing "git status" in a fresh checkout and
counting the number of open(2) calls.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we had to refresh the index internally before running diff or status,
we opportunistically updated the $GIT_INDEX_FILE so that later invocation
of git can use the lstat(2) we already did in this invocation.
Make them share a helper function to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If gitk is not available in the PATH, bisect ends up
exiting with the shell's 127 error code, confusing the git
wrapper into thinking that bisect is not a git command.
We already fallback to git-log if there doesn't seem to be a
graphical display available. We should do the same if gitk
is not available in our PATH at all. This not only fixes the
ugly error message, but is a much more sensible default than
failing to show the user anything.
Reported by Maxin John.
Tested-by: Maxin B. John <maxin@maxinbjohn.info>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fd-limit:
sha1_file.c: Don't retain open fds on small packs
mingw: add minimum getrlimit() compatibility stub
Limit file descriptors used by packs
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
The test setup in t8006-blame-textconv.sh uses "ln -sf" to
overwrite an existing symlink. Unfortunately, both /usr/bin/ln
and /usr/xpg4/bin/ln on solaris 9 don't properly handle -f and -s
used at the same time. This caused the test setup and subsequent
checks to fail.
Instead, remove the symlink and then create a new one in the
setup code.
The upstream Solaris bug (fixed in 10, but not 9) is documented
here:
http://bugs.opensolaris.org/view_bug.do?bug_id=4372462
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: moved "cd subdir" inside subshell and fixed comparison with expected]
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test suite runs valgrind with certain options activated. Add a
note saying how to run commands under the same conditions as the test
suite does.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.
While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash create' must operate with a temporary index. For this purpose,
it used 'cp -p' to create a copy. -p is needed to preserve the timestamp
of the index file. Now Jakob Pfender reported a certain combination of
a Linux NFS client, OpenBSD NFS server, and cp implementation where this
operation failed.
Luckily, the first operation in git-stash after copying the index is to
call 'git read-tree'. Therefore, use --index-output instead of 'cp -p'
to write the copy of the index.
--index-output requires that the specified file is on the same volume as
the source index, so that the lock file can be rename()d. For this reason,
the name of the temporary index is constructed in a way different from the
other temporary files. The code path of 'stash -p' also needs a temporary
index, but we do not use the new name because it does not depend on the
same precondition as --index-output.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The * was inside the quotes, so that the pattern was never expanded and the
temporary files were never removed. As a consequence, 'stash -p' left a
.git-stash-*-patch file in $GIT_DIR. Other code paths did not leave files
behind because they removed the temporary file themselves, at least in
non-error paths.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
Consider the following code fragment:
/*
* test
*/
vim ":set list" mode shows that the first character on each line is a
tab:
^I/*$
^I * test$
^I */$
By default, the "highlight" program will retain the tabs in the HTML
output:
$ highlight --fragment --syntax c test.c
<span class="hl com">/*</span>
<span class="hl com"> * test</span>
<span class="hl com"> */</span>
vim list mode:
^I<span class="hl com">/*</span>$
<span class="hl com">^I * test</span>$
<span class="hl com">^I */</span>$
In gitweb, this winds up looking something like:
1 /*
2 * test
3 */
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
