Instead of installing/copying three programs separately, just install one
and try to make hardlinks to the other two.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify git-http-fetch's dependancies explicitly rather than inheriting from
git-http-push, as that may not be built if the libcurl version is too old or
NO_EXPAT is defined
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on the mozilla SHA1 routine, but doing the input data accesses a
word at a time and with 'htonl()' instead of loading bytes and shifting.
It requires an architecture that is ok with unaligned 32-bit loads and a
fast htonl().
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This splits up git-http-fetch so that it isn't built-in.
It also removes the general dependency on curl, because it is no
longer used by any built-in code. Because they are no longer LIB_OBJS,
add LIB_H to the dependencies of http-related object files, and remove
http.h from the dependencies of transport.o
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the transport native helper mechanism to fetch by http (and ftp, etc).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport_get() can call transport_native_helper_init() to have list and
fetch-ref operations handled by running a separate program as:
git remote-<something> <remote> [<url>]
This program then accepts, on its stdin, "list" and "fetch <hex>
<name>" commands; the former prints out a list of available refs and
either their hashes or what they are symrefs to, while the latter
fetches them into the local object database and prints a newline when done.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
SunOS grep does not understand -C<n> nor -e
Fix export_marks() error handling.
git branch: clean up detached branch handling
git branch: avoid unnecessary object lookups
git branch: fix performance problem
do_one_ref(): null_sha1 check is not about broken ref
Conflicts:
Makefile
The first "grep -C1" test in t7002 does not pass on my SunOS-5.11-i86pc,
and that is not because our way to spawn external grep is broken, but
because the native grep does not understand -C<n>.
It turns out that Peff was also using this option himself because our
Makefile doesn't do that automatically. Brandon Casey uses SUNWspro
compiler without having to set this, and it turns out that the compiler
does not define preprocessor macro __unix__ which made him always use the
built-in grep, never an external one.
Let's be more explicit and say that we do not use external grep on Suns.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 003b33a8 recently added a call to basename(). On IRIX 6.5, this
function resides in libgen and -lgen is required for the linker.
Update configure.ac too.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason there still are people who use the old style layout
to put everything in $(bindir). The previous commit breaks the install
for them, because it tries to unconditionally remove git from execdir
and cp/ln from bindir --- oops.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git command executes a subcommand, it uses the "git
foo" form, which relies on finding "git" in the PATH.
Normally this should not be a problem, since the same "git"
that was used to invoke git in the first place will be
found. And if somebody invokes a "git" outside of the PATH
(e.g., by giving its absolute path), this case is already
covered: we put that absolute path onto the front of PATH.
However, if one is using "sudo", then sudo will execute the
"git" from the PATH, but pass along a restricted PATH that
may not contain the original "git" directory. In this case,
executing a subcommand will fail.
To solve this, we put the "git" wrapper itself into the
execdir; this directory is prepended to the PATH when git
starts, so the wrapper will always be found.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
There is special handling in compat/regex/regex.c for the GNU compiler
to define alloca to __builtin_alloca, but the native compiler must include
alloca.h which happens when HAVE_ALLOCA_H is defined.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The system regex is either slow or buggy for complex
patterns, like the built-in xfuncname pattern for java
files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no tweakable knob to use the regex compat code; it
was embedded in the mingw build. Since other platforms may
want to use it, let's factor it out in the usual way for
build configuration knobs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/msysgit:
compat/ has subdirectories: do not omit them in 'make clean'
Fix typo in nedmalloc warning fix
MinGW: Teach Makefile to detect msysgit and apply specific settings
Fix warnings in nedmalloc when compiling with GCC 4.4.0
Add custom memory allocator to MinGW and MacOS builds
MinGW readdir reimplementation to support d_type
connect.c: Support PuTTY plink and TortoisePlink as SSH on Windows
git: browsing paths with spaces when using the start command
MinGW: fix warning about implicit declaration of _getch()
test-chmtime: work around Windows limitation
Work around a regression in Windows 7, causing erase_in_line() to crash sometimes
Quiet make: do not leave Windows behind
MinGW: GCC >= 4 does not need SNPRINTF_SIZE_CORR anymore
Conflicts:
Makefile
* bc/solaris:
configure: test whether -lresolv is needed
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
git-compat-util.h: avoid using c99 flex array feature with Sun compiler 5.8
Makefile: add section for SunOS 5.7
Makefile: introduce SANE_TOOL_PATH for prepending required elements to PATH
Makefile: define __sun__ on SunOS
git-compat-util.h: tweak the way _XOPEN_SOURCE is set on Solaris
On Solaris choose the OLD_ICONV iconv() declaration based on the UNIX spec
Makefile: add NEEDS_RESOLV to optionally add -lresolv to compile arguments
Makefile: use /usr/ucb/install on SunOS platforms rather than ginstall
Conflicts:
Makefile
In an earlier patch, we introduced SANE_TOOL_PATH that is prepended to
user's PATH. This had an unintended consequence of overriding user's
private binary directory that typically comes earlier in the PATH to holds
even saner commands than whatever comes with the system.
For example, a user may have ~/bin that is early in the path and contains
a shell script "vi" that launches system's /bin/vi with specific options.
Prepending SANE_TOOL_PATH to the PATH that happens to have "vi" in it
defeats such customization.
This fixes the issue by inserting SANE_TOOL_PATH just before /bin or
/usr/bin appears on the PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit changes handling of the msysgit specific settings, so
that they can be applied to official git.git. Some msysgit
settings differ from the standard MinGW settings. We move them
into an ifndef block that is only evaluated if a file
THIS_IS_MSYSGIT is present in the parent directory, which is the
case for an msysgit working environment. The tag file is unlikely
to be present accidentally.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (like SunOS and family) have kept their common binaries at
some historical moment in time, and introduced new binaries with modern
features in a special location like /usr/xpg4/bin or /usr/ucb. Some of the
features provided by these modern binaries are expected and required by git.
If the featureful binaries are not in the users path, then git could end up
using the less featureful binary and fail.
So provide a mechanism to prepend elements to the users PATH at runtime so
the modern binaries will be found.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SUNWspro compiler does not define __sun__ (like GCC does). A check of
this macro was recently added to detect compilation on SunOS and to modify
the handling of the NO_ICONV and _XOPEN_SOURCE feature macros.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OLD_ICONV is only necessary on Solaris until UNIX03. This is indicated
by the private macro _XPG6 which is set in /usr/include/sys/feature_tests.h.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This library is required on Solaris when compiling with NO_IPV6 since
hstrerror resides in libresolv. Additionally, Solaris 7 will need it,
since inet_ntop and inet_pton reside there too.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/pretty-tempname:
diff: generate pretty filenames in prep_temp_blob()
compat: add a basename() compatibility function
compat: add a mkstemps() compatibility function
Conflicts:
Makefile
The standard allocator on Windows is pretty bad prior
to Windows Vista, and nedmalloc is better than the
modified dlmalloc provided with newer versions of the
MinGW libc.
NedMalloc stats in Git
----------------------
All results are the best result out of 3 runs. The
benchmarks have been done on different hardware, so
the repack times are not comparable.
These benchmarks are all based on 'git repack -adf'
on the Linux kernel.
XP
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
3.4.2 (1T) 00:12:28.422
3.4.2 + nedmalloc (1T) 00:07:25.437 1.68x
3.4.5 (1T) 00:12:20.718
3.4.5 + nedmalloc (1T) 00:07:24.809 1.67x
4.3.3-tdm (1T) 00:12:01.843
4.3.3-tdm + nedmalloc (1T) 00:07:16.468 1.65x
4.3.3-tdm (2T) 00:07:35.062
4.3.3-tdm + nedmalloc (2T) 00:04:57.874 1.54x
Vista
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
4.3.3-tdm (1T) 00:07:40.844
4.3.3-tdm + nedmalloc (1T) 00:07:17.548 1.05x
4.3.3-tdm (2T) 00:05:33.746
4.3.3-tdm + nedmalloc (2T) 00:05:27.334 1.02x
Mac Mini
-----------------------------------------------
GCC Threads Total Time Speed
-----------------------------------------------
i686-darwin9-4.0.1 (2T) 00:09:57.346
i686-darwin9-4.0.1+ned (2T) 00:08:51.072 1.12x
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we have to check whether there are scripts which would
override .exe files, but this check missed the "quietification".
Make now prints 'BUILTIN all' instead of a long chain of 'test || rm'
commands.
[spr: added clarification what make will print. ]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems such as Windows lack libgen.h so provide a
basename() implementation for cross-platform use.
This introduces the NO_LIBGEN_H construct to the Makefile
and autoconf scripts.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mkstemps() is a BSD extension so provide an implementation
for cross-platform use.
Signed-off-by: David Aguilar <davvid@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org> (Windows)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command can only be used now to list replace refs in
"refs/replace/" and to delete them.
The option to list replace refs is "-l".
The option to delete replace refs is "-d".
The behavior should be consistent with how "git tag" and "git branch"
are working.
The code has been copied from "builtin-tag.c" by Kristian Høgsberg
<krh@redhat.com> and Carlos Rica <jasampler@gmail.com> that was itself
based on git-tag.sh and mktag.c by Linus Torvalds.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code implementing this mechanism has been copied more-or-less
from the commit graft code.
This mechanism is used in "read_sha1_file". sha1 passed to this
function that match a ref name in "refs/replace/" are replaced by
the sha1 that has been read in the ref.
We "die" if the replacement recursion depth is too high or if we
can't read the replacement object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
We can avoid a GNU dependency by using /usr/ucb/install.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'cc/bisect' (early part):
bisect: make "git bisect" use new "--next-all" bisect-helper function
bisect: add "check_good_are_ancestors_of_bad" function
bisect: implement the "check_merge_bases" function
bisect: automatically sort sha1_array if needed when looking it up
bisect: make skipped array functions more generic
bisect: remove too much function nesting
bisect: use new "struct argv_array" to prepare argv for "setup_revisions"
bisect: store good revisions in a "sha1_array"
bisect: implement "rev_argv_push" to fill an argv with revs
bisect: use "sha1_array" to store skipped revisions
am: simplify "sq" function by using "git rev-parse --sq-quote"
bisect: use "git rev-parse --sq-quote" instead of a custom "sq" function
rev-parse: add --sq-quote to shell quote arguments
rev-list: remove stringed output flag from "show_bisect_vars"
bisect--helper: remove "--next-vars" option as it is now useless
bisect: use "git bisect--helper --next-exit" in "git-bisect.sh"
bisect--helper: add "--next-exit" to output bisect results
bisect: move common bisect functionality to "bisect_common"
rev-list: refactor printing bisect vars
rev-list: make "estimate_bisect_steps" non static
Like Darwin, OpenBSD's stat struct uses st_ctimespec and st_mtimestruct
rather than st_ctim and st_mtim.
Signed-off-by: Tony Kemp <tony.kemp@newcastle.edu.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the installed programs are tar'ed up and installed on a system where
bin/ and libexec/git-core/ live on different file systems, we do not want
libexec/git-core/git-* to be hardlinks to bin/git.
Noticed by Cedric Staniewski.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "sq" function was the only place using Perl in "git-bisect.sh",
this removes the Perl dependency in this script.
While at it, we also remove the sed instruction in the Makefile that
substituted @@PERL@@ with the Perl path in shell scripts, as this is
not needed anymore. (It is now only needed in "git-instaweb.sh" but
this command is dealt with separately in the Makefile.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Unreliable hardlinks" is a misleading description for what is happening.
So rename it to something less misleading.
Suggested by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
This repeats commit 0d768f7 for the installation destdir.
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user has defined NO_PERL, we want to skip building
gitweb entirely. However, the conditional to add
gitweb/gitweb.cgi to OTHER_PROGRAMS was evaluated before we
actually parsed the user's config.mak. This meant that "make
NO_PERL=NoThanks" worked fine, but putting "NO_PERL=NoThanks"
into your config.mak broke the build (it wanted gitweb.cgi
to satisfy "all", but the rule to build it was conditionally
ignored, so it complained).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that accessing NTFS partitions with ufsd (at least on my EeePC)
has an unnerving bug: if you link() a file and unlink() it right away,
the target of the link() will have the correct size, but consist of NULs.
It seems as if the calls are simply not serialized correctly, as single-stepping
through the function move_temp_to_file() works flawlessly.
As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work
around it in Git.
At the same time, it seems that this fixes msysGit issues 222 and 229 to
assume that Windows cannot handle link() && unlink().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target still descends into perl subdirectory when NO_PERL is
requested. Fix this.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e4c72923 (write_entry(): use fstat() instead of lstat() when file
is open, 2009-02-09) introduced an optimization of write_entry().
Unfortunately, we cannot take advantage of this optimization on Windows
because there is no guarantee that the time stamps are updated before the
file is closed:
"The only guarantee about a file timestamp is that the file time is
correctly reflected when the handle that makes the change is closed."
(http://msdn.microsoft.com/en-us/library/ms724290(VS.85).aspx)
The failure of this optimization on Windows can be observed most easily by
running a 'git checkout' that has to update several large files. In this
case, 'git checkout' will report modified files, but infact only the
timestamps were incorrectly recorded in the index, as can be verified by a
subsequent 'git diff', which shows no change.
Dmitry Potapov reports the same fix needs on Cygwin; this commit contains
his updates for that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/difftool:
mergetool--lib: simplify API usage by removing more global variables
Fix misspelled mergetool.keepBackup
difftool/mergetool: refactor commands to use git-mergetool--lib
mergetool: use $( ... ) instead of `backticks`
bash completion: add git-difftool
difftool: add support for a difftool.prompt config variable
difftool: add various git-difftool tests
difftool: move 'git-difftool' out of contrib
difftool/mergetool: add diffuse as merge and diff tool
difftool: add a -y shortcut for --no-prompt
difftool: use perl built-ins when testing for msys
difftool: remove the backup file feature
difftool: remove merge options for opendiff, tkdiff, kdiff3 and xxdiff
git-mergetool: add new merge tool TortoiseMerge
git-mergetool/difftool: make (g)vimdiff workable under Windows
doc/merge-config: list ecmerge as a built-in merge tool
* cc/bisect-filter: (21 commits)
rev-list: add "int bisect_show_flags" in "struct rev_list_info"
rev-list: remove last static vars used in "show_commit"
list-objects: add "void *data" parameter to show functions
bisect--helper: string output variables together with "&&"
rev-list: pass "int flags" as last argument of "show_bisect_vars"
t6030: test bisecting with paths
bisect: use "bisect--helper" and remove "filter_skipped" function
bisect: implement "read_bisect_paths" to read paths in "$GIT_DIR/BISECT_NAMES"
bisect--helper: implement "git bisect--helper"
bisect: use the new generic "sha1_pos" function to lookup sha1
rev-list: call new "filter_skip" function
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
rev-list: pass "revs" to "show_bisect_vars"
rev-list: make "show_bisect_vars" non static
rev-list: move code to show bisect vars into its own function
rev-list: move bisect related code into its own file
rev-list: make "bisect_list" variable local to "cmd_rev_list"
refs: add "for_each_ref_in" function to refactor "for_each_*_ref" functions
quote: add "sq_dequote_to_argv" to put unwrapped args in an argv array
...
These scripts all test git programs that are written in
perl, and thus obviously won't work if NO_PERL is defined.
We pass NO_PERL to the scripts from the building Makefile
via the GIT-BUILD-OPTIONS file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For systems with a missing or broken perl, it is nicer to
explicitly say "we don't want perl" because:
1. The Makefile knows not to bother with Perl-ish things
like Git.pm.
2. We can print a more user-friendly error message
than "foo is not a git command" or whatever the broken
perl might barf
3. Test scripts that require perl can mark themselves and
such and be skipped
This patch implements parts (1) and (2). The perl/
subdirectory is skipped entirely, gitweb is not built, and
any git commands which rely on perl will print a
human-readable message and exit with an error code.
This patch is based on one from Robin H. Johnson.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This consolidates the common functionality from git-mergetool and
git-difftool--helper into a single git-mergetool--lib scriptlet.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares 'git-difftool' and its documentation for
mainstream use.
'git-difftool-helper' became 'git-difftool--helper'
since users should not use it directly.
'git-difftool' was added to the list of commands as
an ancillaryinterrogator.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/sha1-bsearch: (95 commits)
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
Update draft release notes to 1.6.3
GIT 1.6.2.2
send-email: ensure quoted addresses are rfc2047 encoded
send-email: correct two tests which were going interactive
Documentation: git-svn: fix trunk/fetch svn-remote key typo
Mailmap: Allow empty email addresses to be mapped
Cleanup warning about known issues in cvsimport documentation
Documentation: Remove an odd "instead"
send-email: ask_default should apply to all emails, not just the first
send-email: don't attempt to prompt if tty is closed
fix portability problem with IS_RUN_COMMAND_ERR
Documentation: use "spurious .sp" XSLT if DOCBOOK_SUPPRESS_SP is set
mailmap: resurrect lower-casing of email addresses
builtin-clone.c: no need to strdup for setenv
builtin-clone.c: make junk_pid static
git-svn: add a double quiet option to hide git commits
Update draft release notes to 1.6.2.2
Documentation: push.default applies to all remotes
...
This patch creates new "bisect.c" and "bisect.h" files and move
bisect related code into these files.
While at it, we also remove some include directives that are not
needed any more from the beginning of "builtin-rev-list.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some variables are not initialized in the Makefile, but appended to. If
the user has those variables in her environment, it will break the
build.
The variable names were found using these commands:
$ s='[ \t]';
$ S='[^ \t]';
$ comm -23 \
<(sed -n "s/^$s*\($S*\)$s$s*+=.*/\1/p" < Makefile |
sort | uniq) \
<(sed -n "s/^$s*\($S*\)$s$s*=.*/\1/p" < Makefile |
sort | uniq)
This fixes msysGit issue 216.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add USE_WIN32_MMAP which triggers the use of windows' native
file memory mapping functionality in git_mmap()/git_munmap() functions.
As git functions currently use mmap with MAP_PRIVATE set only, this
implementation supports only that mode for now.
On Windows, offsets for memory mapped files need to match the allocation
granularity. Take this into account when calculating the packed git-
windowsize and file offsets. At the moment, the only function which makes
use of offsets in conjunction with mmap is use_pack() in sha1-file.c.
Git fast-import's code path tries to map a portion of the temporary
packfile that exceeds the current filesize, i.e. offset+length is
greater than the filesize. The NO_MMAP code worked with that since pread()
just reads the file content until EOF and returns gracefully, while
MapViewOfFile() aborts the mapping and returns 'Access Denied'.
Working around that by determining the filesize and adjusting the length
parameter.
Signed-off-by: Janos Laube <janos.dev@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
* tr/gcov:
Test git-patch-id
Test rev-list --parents/--children
Test log --decorate
Test fsck a bit harder
Test log --graph
Test diff --dirstat functionality
Test that diff can read from stdin
Support coverage testing with GCC/gcov
The comments indicated that setting a Makefile variable USE_NSEC would
enable the code for sub-second [cm]times. However, the Makefile
variable was never turned into a compiler switch so the code was never
enabled. This patch allows USE_NSEC to be noticed by the compiler.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all OSes use st_ctim and st_mtim in their struct stat. In
particular, it appears that OS X uses st_*timespec instead. So add a
Makefile variable and #define called USE_ST_TIMESPEC to switch the
USE_NSEC defines to use st_*timespec.
This also turns it on by default for OS X (Darwin) machines. Likely
this is a sane default for other BSD kernels as well, but I don't have
any to test that assumption on.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the lack of USE_NSEC meant "do not record nor use the
nanosecond resolution part of the file timestamps". To avoid problems on
filesystems that lose the ns part when the metadata is flushed to the disk
and then later read back in, disabling USE_NSEC has been a good idea in
general.
If you are on a filesystem without such an issue, it does not hurt to read
and store them in the cached stat data in the index entries even if your
git is compiled without USE_NSEC. The index left with such a version of
git can be read by git compiled with USE_NSEC and it can make use of the
nanosecond part to optimize the check to see if the path on the filesystem
hsa been modified since we last looked at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was mostly being tested implicitly by the "http push"
tests. But making a separate test script means that:
- we will run fetch tests even when http pushing support
is not built
- when there are failures on fetching, they are easier to
see and isolate, as they are not in the middle of push
tests
This script defaults to running the webserver on port 5550,
and puts the original t5540 on port 5540, so that the two
can be run simultaneously without conflict (but both still
respect an externally set LIB_HTTPD_PORT).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'make install' was run with sufficient privileges, then the installed
builtins in gitexecdir, which are either hardlinked, symlinked, or copied,
would receive the user and group of whoever built git. With this commit
the initial hardlink or copy is done from the installation tree and not
the build tree to fix this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With gcc's --coverage option, we can perform automatic coverage data
collection for the test suite.
Add a new Makefile target 'coverage' that scraps all previous coverage
results, recompiles git with the required compiler/linker flags (in
addition to any flags you specify manually), then runs the test suite
and compiles a report.
The compilation must be done with all optimizations disabled, since
inlined functions (and for line-by-line coverage, also optimized
branches/loops) break coverage tracking.
The tests are run serially (with -j1). The coverage code should
theoretically allow concurrent access to its data files, but the
author saw random test failures. Obviously this could be improved.
The report currently consists of a list of functions that were never
executed during the tests, which is written to
'coverage-untested-functions'. Once this list becomes reasonably
short, we would also want to look at branches that were never taken.
Currently only toplevel *.c files are considered. It would be nice to
at least include xdiff, but --coverage did not save data to
subdirectories on the system used to write this (gcc 4.3.2).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
026fa0d (Move computation of absolute paths from Makefile to runtime in
preparation for RUNTIME_PREFIX, 2009-01-18) broke the installation of html
documentation. A relative htmldir is given to Documentation/Makefile and
html documentations are installed in a subdirectory of "Documentation" in
the source tree.
Fix this by not exporting htmldir from Makefile; this allows
Documentation/Makefile to compute the htmldir from the prefix.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some filenames in the Makefile got out of order.
This patch resorts the filename lists which makes it easier
to grasp that it is sorted and that this should be kept.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/notes:
git-notes: fix printing of multi-line notes
notes: fix core.notesRef documentation
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
pretty.c
1) Instead of requesting OLD_ICONV on all Mac OS X versions except for 10.5
(which will break when 10.6 is released), exlicitly request it for versions
older than 10.5.
2) NO_STRLCPY is not needed since Mac OS X 10.2. Noticed by Benjamin Kramer.
Note that uname -r returns the underlying Darwin version, which can be mapped
to Mac OS X version at http://www.opensource.apple.com/darwinsource/
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The installation rules wanted to differentiate between a template_dir that
is given as an absolute path (e.g. /usr/share/git-core/templates) and a
relative one (e.g. share/git-core/templates) but it was done by checking
if $(abspath $(template_dir)) and $(template_dir) yield the same string.
This was wrong in at least two ways.
* The user can give template_dir with a trailing slash from the command
line to invoke make or from the included config.mak. A directory path
ought to mean the same thing with or without such a trailing slash but
use of $(abspath) means an absolute path with a trailing slash fails
the test.
* Versions of GNU make older than 3.81 do not have $(abspath) to begin
with.
This changes the detection logic to see if the given path begins with a
slash.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
Conflicts:
Makefile
* maint-1.6.0:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
5c5ba73 (Makefile: Use generic rule to build test programs,
2007-05-31) tried to use generic rule to build test programs, but it
misses the file 'dump-cache-tree.c', since its name is not prefixed by
'test-'. This commit solves this little problem by renaming this file
instead of carrying out an explicit rule in Makefile.
Signed-off-by: Guanqun Lu <guanqun.lu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/runtime-prefix:
Windows: Revert to default paths and convert them by RUNTIME_PREFIX
Compute prefix at runtime if RUNTIME_PREFIX is set
Modify setup_path() to only add git_exec_path() to PATH
Add calls to git_extract_argv0_path() in programs that call git_config_*
git_extract_argv0_path(): Move check for valid argv0 from caller to callee
Refactor git_set_argv0_path() to git_extract_argv0_path()
Move computation of absolute paths from Makefile to runtime (in preparation for RUNTIME_PREFIX)
* jk/signal-cleanup:
t0005: use SIGTERM for sigchain test
pager: do wait_for_pager on signal death
refactor signal handling for cleanup functions
chain kill signals for cleanup functions
diff: refactor tempfile cleanup handling
Windows: Fix signal numbers
While the configure script sets the EXPATDIR environment variable to
whatever value was passed to its option --with-expat as the prefix of
the location of the expat library and headers, the Makefile ignored it.
This patch fixes this bug.
Signed-off-by: Serge van den Boom <svdb@stack.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed in
http://lists.apple.com/archives/Unix-porting/2005/Mar/msg00019.html
the Mac OS X C standard library is always thread safe and always
includes the pthread library. So explicitly using -pthread causes an
'unrecognized option' compiler warning.
This patch clears PTHREAD_LIBS if Darwin is detected.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RUNTIME_PREFIX mechanism allows us to use the default paths on
Windows too. Defining RUNTIME_PREFIX explicitly requests for
translation of paths relative to the executable at runtime.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for relocatable binaries (called
RUNTIME_PREFIX). Such binaries can be moved together with the
system configuration files to a different directory, as long as the
relative paths from the binary to the configuration files is
preserved. This functionality is essential on Windows where we
deliver git binaries with an installer that allows to freely choose
the installation location.
If RUNTIME_PREFIX is unset we use the static prefix. This will be
the default on Unix. Thus, the behavior on Unix will remain
identical to the old implementation, which used to add the prefix
in the Makefile.
If RUNTIME_PREFIX is set the prefix is computed from the location
of the executable. In this case, system_path() tries to strip
known directories that executables can be located in from the path
of the executable. If the path is successfully stripped it is used
as the prefix. For example, if the executable is
"/msysgit/bin/git" and BINDIR is "bin", then the prefix computed is
"/msysgit".
If the runtime prefix computation fails, we fall back to the static
prefix specified in the makefile. This can be the case if the
executable is not installed at a known location. Note that our
test system sets GIT_CONFIG_NOSYSTEM to tell git to ignore global
configuration files during testing. Hence testing does not trigger
the fall back.
Note that RUNTIME_PREFIX only works on Windows, though adding
support on Unix should not be too hard. The implementation
requires argv0_path to be set to an absolute path. argv0_path must
point to the directory of the executable. We use assert() to
verify this in debug builds. On Windows, the wrapper for main()
(see compat/mingw.h) guarantees that argv0_path is correctly
initialized. On Unix, further work is required before
RUNTIME_PREFIX can be enabled.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prepares the Makefile for relocatable binaries (called
RUNTIME_PREFIX). Such binaries will be able to be moved together
with the system configuration files to a different directory,
requiring to compute the prefix at runtime.
In a first step, we make all paths relative in the Makefile and
teach system_path() to add the prefix instead. We used to compute
absolute paths in the Makefile and passed them to C as defines. We
now pass relative paths to C and call system_path() to add the
prefix at runtime.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a piece of code wanted to do some cleanup before exiting
(e.g., cleaning up a lockfile or a tempfile), our usual
strategy was to install a signal handler that did something
like this:
do_cleanup(); /* actual work */
signal(signo, SIG_DFL); /* restore previous behavior */
raise(signo); /* deliver signal, killing ourselves */
For a single handler, this works fine. However, if we want
to clean up two _different_ things, we run into a problem.
The most recently installed handler will run, but when it
removes itself as a handler, it doesn't put back the first
handler.
This patch introduces sigchain, a tiny library for handling
a stack of signal handlers. You sigchain_push each handler,
and use sigchain_pop to restore whoever was before you in
the stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target uses a foreach loop to generate a single long shell
command line to handle installation of the built-in git commands. The
maximum length of the argument list varies by platform, and this use of
foreach quickly grows the length of the argument list. Current git can
exceed the default maximum argument list length on IRIX 6.5 of 20480
depending on the installation path.
Rather than using make's foreach loop to pre-generate the shell command
line, use a shell for-loop and allow the shell to iterate through each of
the built-in commands.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Manipulating the character class table in ctype.c by hand is error prone.
To ensure that typos are found quickly, add a test program and script.
test-ctype checks the output of the character class macros isspace() et.
al. by applying them on all possible char values and consulting a list of
all characters in the particular class. It doesn't check tolower() and
toupper(); this could be added later.
The test script t0070-fundamental.sh is created because there is no good
place for the ctype test, yet -- except for t0000-basic.sh perhaps, but
it doesn't run well on Windows, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to keep lines under 80 characters, not to mention
that sticking a bunch of stuff on one line makes diffs
messier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches Git to produce diff output using the patience diff
algorithm with the diff option '--patience'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use dblatex in order to create a pdf version of the git user manual. No
existing Makefile targets (including "all") are touched, so you need to
explicitly say
make pdf
sudo make install-pdf
to get user-manual.pdf created and installed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier the plan was to eventually eradicate git-foo executables from the
filesystem for all the built-in commands, but when we released 1.6.0 we
decided not to do so. Instead, it has been promised that by prepending
the output from $(git --exec-path) to your $PATH, you can keep using the
dashed form of commands.
This also allows "git stage" to appear in the autogenerated command list,
which is used to offer man pages by "git help" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces make variable NO_PTHREADS for platforms that lack the
support for pthreads library or people who do not want to use it for
whatever reason. When defined, it makes the multi-threaded index
preloading into a no-op, and also disables threaded delta searching by
pack-objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <j6t@kdbg.org> (AIX 4.3.x)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/strbuf-expand:
remove the unused files interpolate.c and interpolate.h
daemon: deglobalize variable 'directory'
daemon: inline fill_in_extra_table_entries()
daemon: use strbuf_expand() instead of interpolate()
merge-recursive: use strbuf_expand() instead of interpolate()
add strbuf_expand_dict_cb(), a helper for simple cases
This can do the lstat() storm in parallel, giving potentially much
improved performance for cold-cache cases or things like NFS that have
weak metadata caching.
Just use "read_cache_preload()" instead of "read_cache()" to force an
optimistic preload of the index stat data. The function takes a
pathspec as its argument, allowing us to preload only the relevant
portion of the index.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'ds/uintmax-config' (early part):
Add autoconf tests for pthreads
Make Pthread link flags configurable
Add Makefile check for FreeBSD 4.9-SECURITY
Build: add NO_UINTMAX_T to support ancient systems
Conflicts:
Makefile
* maint:
Fix non-literal format in printf-style calls
git-submodule: Avoid printing a spurious message.
git ls-remote: make usage string match manpage
Makefile: help people who run 'make check' by mistake
The target to run self test is 'make test', but there are people who try
'make check' and worse yet do not have sparse installed.
Suggest 'make test' target when they do not have 'sparse'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FreeBSD 4.x systems use the linker flags `-pthread' instead of the
linker flags `-lpthread' when linking against the pthread library.
Signed-off-by: David M. Syzdek <david.syzdek@acsalaska.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to have non-POSIX comformant BRE in our code, and linked with GNU
regexp library on a few platforms (Darwin, FreeBSD and AIX) to work it
around. This was backwards.
We've fixed the broken regexps to use ERE that native regexp libraries on
these platforms can handle just fine. There is no need to link with GNU
regexp library on these platforms anymore.
Tested-on-AIX-by: Mike Ralphson <mike@abacus.co.uk>
Tested-on-FreeBSD-by: Jeff King <peff@peff.net>
Tested-on-Darwin-by: Arjen Laarhoven <arjen@yaph.org>
Tested-on-Darwin-by: Pieter de Bie <pieter@frim.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the system is FreeBSD 4.9, then NO_UINTMAX_T and NO_STRTOUMAX is defined.
Signed-off-by: David M. Syzdek <david.syzdek@acsalaska.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds NO_UINTMAX_T for ancient systems, such as FreeBSD 4.9-SECURITY.
If NO_UINTMAX_T is defined, then uintmax_t is defined as uint32_t.
Signed-off-by: David M. Syzdek <david.syzdek@acsalaska.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is one of the server side programs and needs to be found on usual $PATH.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
/etc/passwd shell field must be something execable, you can't enter
"/usr/bin/git shell" there. git-shell must be present as a separate
executable, or it is useless.
Signed-off-by: Tommi Virtanen <tv@eagain.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both sets of code assume that one specifies a diff profile
as a gitattribute via the "diff=foo" attribute. They then
pull information about that profile from the config as
diff.foo.*.
The code for each is currently completely separate from the
other, which has several disadvantages:
- there is duplication as we maintain code to create and
search the separate lists of external drivers and
funcname patterns
- it is difficult to add new profile options, since it is
unclear where they should go
- the code is difficult to follow, as we rely on the
"check if this file is binary" code to find the funcname
pattern as a side effect. This is the first step in
refactoring the binary-checking code.
This patch factors out these diff profiles into "userdiff"
drivers. A file with "diff=foo" uses the "foo" driver, which
is specified by a single struct.
Note that one major difference between the two pieces of
code is that the funcname patterns are always loaded,
whereas external drivers are loaded only for the "git diff"
porcelain; the new code takes care to retain that situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
builtin-apply: fix typo leading to stack corruption
git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)
builtin-merge.c: allocate correct amount of memory
Makefile: do not set NEEDS_LIBICONV for Solaris 8
rebase -i: remove leftover debugging
rebase -i: proper prepare-commit-msg hook argument when squashing
This breaks my build on Solaris 8, as there is no separate
libiconv.
The history of this line is somewhat convoluted. In 2fd955c
(in November 2005), NEEDS_LIBICONV was turned on for all
Solaris builds, claiming to "fix an error in Solaris 10 by
setting NEEDS_LIBICONV".
Later, e15f545 (in February of 2006) claimed that "Solaris
9+ don't need iconv", and moved NEEDS_LIBICONV into a
section for Solaris 8.
Furthermore, Brandon Casey claims in
<5A1KxlhmUIHe8iXPxnXYuNXsq0Yjlbwkz2eBin3z7ELuL9nK-4tSpw@cipher.nrlssc.navy.mil>
that he does not set NEEDS_LIBICONV for Solaris 7.
So either one of those commits is totally wrong, or there is
some other magic going on where some Solaris installs need
it and others don't.
Given Brandon's statement and my problems on Solaris 8 with
NEEDS_LIBICONV, I am inclined to think the first commit was
bogus, and that NEEDS_LIBICONV shouldn't be set for Solaris
at all by default. If somebody wants to use iconv and has
installed it manually, they can set it in their config.mak.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
gitweb: Add path_info tests to t/t9500-gitweb-standalone-no-errors.sh
gitweb: Fix two 'uninitialized value' warnings in git_tree()
Solaris: Use OLD_ICONV to avoid compile warnings
gitweb: remove PATH_INFO from $my_url and $my_uri
Solaris systems use the old styled iconv(3) call and therefore
the OLD_ICONV variable should be set. Otherwise we get annoying compile
warnings.
Signed-off-by: David Soria Parra <dsp@php.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
lstat/stat functions in Cygwin are very slow, because they try to emulate
some *nix things that Git does not actually need. This patch adds Win32
specific implementation of these functions for Cygwin.
This implementation handles most situation directly but in some rare cases
it falls back on the implementation provided for Cygwin. This is necessary
for two reasons:
- Cygwin has its own file hierarchy, so absolute paths used in Cygwin is
not suitable to be used Win32 API. cygwin_conv_to_win32_path can not be
used because it automatically dereference Cygwin symbol links, also it
causes extra syscall. Fortunately Git rarely use absolute paths, so we
always use Cygwin implementation for absolute paths.
- Support of symbol links. Cygwin stores symbol links as ordinary using
one of two possible formats. Therefore, the fast implementation falls
back to Cygwin functions if it detects potential use of symbol links.
The speed of this implementation should be the same as mingw_lstat for
common cases, but it is considerable slower when the specified file name
does not exist.
Despite all efforts to make the fast implementation as robust as possible,
it may not work well for some very rare situations. I am aware only one
situation: use Cygwin mount to bind unrelated paths inside repository
together. Therefore, the core.ignoreCygwinFSTricks configuration option is
provided, which controls whether native or Cygwin version of stat is used.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* mv/merge-recursive:
builtin-merge: release the lockfile in try_merge_strategy()
merge-recursive: get rid of virtual_id
merge-recursive: move current_{file,directory}_set to struct merge_options
merge-recursive: move the global obuf to struct merge_options
merge-recursive: get rid of the index_only global variable
merge-recursive: move call_depth to struct merge_options
cherry-pick/revert: make direct internal call to merge_tree()
builtin-merge: avoid run_command_v_opt() for recursive and subtree
merge-recursive: introduce merge_options
merge-recursive.c: Add more generic merge_recursive_generic()
Split out merge_recursive() to merge-recursive.c
* jc/alternate-push:
push: receiver end advertises refs from alternate repositories
push: prepare sender to receive extended ref information from the receiver
receive-pack: make it a builtin
is_directory(): a generic helper function
Commit 3632cfc24 makes the same change for Darwin; however, the problem
also exists on FreeBSD.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This augments 3632cfc24 (Use compatibility regex library on Darwin,
2008-09-07), which already carries a "Tested-by" statement for AIX,
but that test was actually done with this patch included.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Tested-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is one of the server side programs and needs to be found on usual $PATH.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces new build targets "man" and "html" which allow building
the documentation in the respective formats separately. This helps
people with a partial documentation build chain: html pages can be built
without xmlto.
This is documented in INSTALL now, together with corrections: Before,
instructions in INSTALL would build man+html but install man only. Now
the instructions build and install both, and new and pre-existing
targets are explained.
Note that build targets "doc" and "man" correspond to install targets
"install-doc install-html" and "install-doc" respectively. This
inconsistency is not changed, in order to keep everyone's build scripts
from breaking.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.6.0.2
Use compatibility regex library for OSX/Darwin
git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl
Git.pm: Use File::Temp->tempfile instead of ->new
t7501: always use test_cmp instead of diff
Conflicts:
Makefile
The standard libc regex library on OSX does not support alternation
in POSIX Basic Regular Expression mode. This breaks the diff.funcname
functionality on OSX.
To fix this, we use the GNU regex library which is already present in
the compat/ diretory for the MinGW port. However, simply adding compat/
to the COMPAT_CFLAGS variable causes a conflict between the system
fnmatch.h and the one present in compat/. To remedy this, move the
regex and fnmatch functionality to their own subdirectories in compat/
so they can be included seperately.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Tested-by: Mike Ralphson <mike@abacus.co.uk> (AIX)
Tested-by: Johannes Sixt <johannes.sixt@telecom.at> (MinGW)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good thing to do in general, but more importantly, transport
routines can only be used by built-ins, which is what I'll be adding next.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason that git-shell was excluded from the Windows build was that
our compatibility layer needed stuff that was removed when we tried to
link less of the git library into git-shell. Since 4cfc24a (shell: do
not play duplicated definition games to shrink the executable,
2008-08-19) the complete library is linked again, so we can build
git-shell on Windows as well. (This fixes 'make install', which depends
on that git-shell is always built.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Makefile: add merge_recursive.h to LIB_H
Improve documentation for --dirstat diff option
Bring local clone's origin URL in line with that of a remote clone
Documentation: minor cleanup in a use case in 'git stash' manual
Documentation: fix disappeared lines in 'git stash' manpage
Documentation: fix reference to a for-each-ref option
