On a multiuser system where mortals do not have write access to /etc,
the GIT_CONFIG_NOSYSTEM variable is the best tool we have to keep
getting work done when a syntax error or other problem renders
/etc/gitconfig buggy, until the sysadmin sorts the problem out.
Noticed while experimenting with teaching git to error out when
/etc/gitconfig is unreadable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second paragraph in the git(1) description section were meant to
guide people who are not ready to dive into this page away from here.
Referring migrating CVS users to another page before they get
acquainted with Git was somewhat out of place. Move the reference to
the "FURTHER DOCUMENTATION" section and push that section down.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one at kernel.org has not been updated for quite a while and
can no longer be called "the latest".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously GIT_EDITOR was not listed in git(1) "Environment Variables" section,
which could be very confusing to users. Include it in "other" subsection along
with a link to git-var(1), since that is the page that fully describes all
places where editor can be set and also their preference order.
Also, git-var(1) did not say that hardcoded fallback 'vi' may have been changed
at build time. A user could be puzzled if 'nano' pops up even when none of the
mentioned environment vars or config.editor are set. Clarify this.
Ideally, the build system should be changed to reflect the chosen fallback
editor when creating the man pages. Not sure if that is even possible though.
Signed-off-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line was extended in 2dd8c3 ('git: add --info-path and --man-path
options'), and the formatted man output stopped fitting into the 80
column window.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.7.7:
Git 1.7.7.5
Git 1.7.6.5
blame: don't overflow time buffer
fetch: create status table using strbuf
checkout,merge: loosen overwriting untracked file check based on info/exclude
cast variable in call to free() in builtin/diff.c and submodule.c
apply: get rid of useless x < 0 comparison on a size_t type
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
builtin/fetch.c
* nk/ref-doc:
glossary: clarify description of HEAD
glossary: update description of head and ref
glossary: update description of "tag"
git.txt: de-emphasize the implementation detail of a ref
check-ref-format doc: de-emphasize the implementation detail of a ref
git-remote.txt: avoid sounding as if loose refs are the only ones in the world
git-remote.txt: fix wrong remote refspec
* nk/ref-doc:
glossary: clarify description of HEAD
glossary: update description of head and ref
glossary: update description of "tag"
git.txt: de-emphasize the implementation detail of a ref
check-ref-format doc: de-emphasize the implementation detail of a ref
git-remote.txt: avoid sounding as if loose refs are the only ones in the world
git-remote.txt: fix wrong remote refspec
Document the namespace mechanism in a new gitnamespaces(7) page.
Reference it from receive-pack and upload-pack.
Document the new --namespace option and GIT_NAMESPACE environment
variable in git(1), and reference gitnamespaces(7).
Add a sample Apache configuration to http-backend(1) to support
namespaced repositories, and reference gitnamespaces(7).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is an unimportant implementation detail that branches and tags are
stored somewhere under $GIT_DIR/refs directory, or the name of the commit
that will become the parent of the next commit is stored in $GIT_DIR/HEAD.
What is more important is that branches live in refs/heads and tags live
in refs/tags hierarchy in the ref namespace, and HEAD means the tip of the
current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/info-man-path:
Documentation: clarify meaning of --html-path, --man-path, and --info-path
git: add --info-path and --man-path options
Conflicts:
Makefile
These options tell UI programs where git put its documentation, so
"Help" actions can show the documentation for *this* version of git
without regard to how MANPATH and INFOPATH are set up. Details:
. Each variable tells where documentation is expected to be. They do
not indicate whether documentation was actually installed.
. The output of "git --html-path" is an absolute path and can be used
in "file://$(git --html-path)/git-add.html" to name the HTML file
documenting a particular command.
. --man-path names a manual page hierarchy (e.g.,
/home/user/share/man). Its output can be passed to "man -M" or put
at the beginning of $MANPATH.
. --info-path names a directory with info files (e.g.,
/home/user/share/info). Its output is suitable as an argument to
"info -d" or for inclusion in $INFOPATH.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the way the --html-path option lets UI programs learn where git
has its HTML documentation pages, expose the other two paths used to store
the documentation pages of these two types.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a spurious empty line which prevented asciidoc from recognizing a
list continuation mark ('+'), so that it does not get output literally any
more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 1.7.4.3 has backmerged a handful of fixes from the master,
drop these entries from 1.7.5 release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a nice shortlog-ish output of the authors there. We
also point people directly to shortlog, but of course they
might be reading the documentation online or from a binary
package of git.
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
* sn/doc-opt-notation:
Fix {update,checkout}-index usage strings
Put a space between `<' and argument in pack-objects usage string
Remove stray quotes in --pretty and --format documentation
Use parentheses and `...' where appropriate
Fix odd markup in --diff-filter documentation
Use angles for placeholders consistently
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kf/askpass-config:
Extend documentation of core.askpass and GIT_ASKPASS.
Allow core.askpass to override SSH_ASKPASS.
Add a new option 'core.askpass'.
There are 108 of them already. That's a bit more than one third of
all the files in the Documentation directory already, and still growing.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'ld/discovery-limit-to-fs' (early part):
Rename ONE_FILESYSTEM to DISCOVERY_ACROSS_FILESYSTEM
GIT_ONE_FILESYSTEM: flip the default to stop at filesystem boundaries
Add support for GIT_ONE_FILESYSTEM
truncate cwd string before printing error message
config.c: remove static keyword from git_env_bool()
* ar/config-from-command-line:
Complete prototype of git_config_from_parameters()
Use strbufs instead of open-coded string manipulation
Allow passing of configuration parameters in the command line
If a missing ONE_FILESYSTEM defaults to true, the only users who set this
variable set it to false to tell git not to limit the discovery to one
filesystem; there are too many negations in one sentence to make a simple
panda brain dizzy.
Use the variable GIT_DISCOVERY_ACROSS_FILESYSTEM that changes the
behaviour from the default "limit to one filesystem" to "cross the
boundary as I ask you to"; makes the semantics much more straight
forward.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regarding the new environment variable, Linus Torvalds
<torvalds@linux-foundation.org> writes on Tue, 30 Mar 2010 in
<alpine.LFD.2.00.1003301537150.3707@i5.linux-foundation.org>:
I suspect that it is _very_ unusual to have a source repo that crosses
multiple filesystems, and the original reason for this patch-series
seems to me to be likely to be more common than that multi-fs case. So
having the logic go the other way would seem to match the common case,
no?
The "crossing filesystem boundary" condition is checked by comparing
st_dev field in the result from stat(2). This is slightly worrysome if
non-POSIX ports return different values in the field even for directories
in the same work tree extracted to the same "filesystem". Erik Faye-Lund
confirms that in the msysgit port st_dev is 0, so this should be safe, as
"even Windows is safe" ;-)
This will affect those who use /.git to cram /etc and /home/me in the same
repostiory, /home is mounted from non-root filesystem, and a git operation
is done from inside /home/me/src. But that is such a corner case we don't
want to give preference over helping people who will benefit from having
this default so that they do not have to suffer from slow automounters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values passed this way will override whatever is defined
in the config files.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes git pay attention to the GIT_ONE_FILESYSTEM environment
variable. When that variable is set, git will stop searching for a
GIT_DIR when it attempts to cross a filesystem boundary.
When working in an environment with too many automount points to make
maintaining a GIT_CEILING_DIRECTORIES list enjoyable, GIT_ONE_FILESYSTEM
gives the option of turning all such attempts off with one setting.
Signed-off-by: Lars R. Damerow <lars@pixar.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
The --paginate option is meant to negate the effect of an explicit or
implicit pager.<cmd> = false setting. Thus it turns the pager on if
output is going to a terminal rather than unconditionally.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
* maint-1.6.5:
Git 1.6.5.8
Fix mis-backport of t7002
bash completion: factor submodules into dirty state
reset: unbreak hard resets with GIT_WORK_TREE
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
